CHEVROLET C30/3500, R30/3500 SERIES 2WD PICKUP (22567)
1995
8 Cyl.
C3500; 155.5" W.B.; 350K Engine (5.7L); 2 W.D.; 1 Ton
DIRECT FIT MSL/MAXIMUM Muffler... Muffler (2058)- 6576, Muffler (3423)- 700126, Silentone DIY Muffler... Muffler (3423)- 5568
(22577)
1995
8 Cyl.
C3500; 159.5", 183.5" W.B.; 454N Engine (7.4L); 2 W.D.; 1 Ton; 15,000 lbs. G.V.W. 1st design without frame rail reinforcement (1994 models)
DIRECT FIT MSL/MAXIMUM Muffler... Muffler (2063)- 700347
NA-Not Available. NR-Not Requried. FL-Remove and Re-Use Old Flange. z Golden Warehouse. O.E.-Original Equipment. # Airtube Kit [4948] may be required to complete installation. EFI-Electronic Fuel Injection. [1]
Original Equipment system was a welded assembly. It is recommended that all parts noted [1] should be replaced. [3] Required for installation. [93] Locating clip must be knocked off OEM converter for proper installation. [98] Refer to current Catalytic Converter catalog for availability. [107] Cut original muffler immediately behind muffler nipple to converter weld and remove any portion of muffler nipple that is inside of converter. Muffler is then installed inside of the converter nipple.
72
[122] If replacing O.E. exhaust system, first cut tail pipe on vehicle immediately behind converter to tail pipe weld. Cut through outer pipe only, leaving converter nipple intact. [958] Federal & California Emission vehicles. Not legal for sale for vehicles licensed in California.