Page 1

DIVIDER INSERT HERE:

wire rigging systems

wire rigging systems

wire rigging systems


HAMMA PRO-STRAND

Online catalogue: www.anzor.co.nz/wire-rigging www.anzor.co.nz/arch

93

• Economical option. • Application: a wide variety of applications including horizontal wire, roof plane (criss cross bracing), and hanging vertically applications. with Micro-stretch Technologies.

1x7

1x19

Wire Rope in 316 or 316 Ultra: page 104

Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are develope d exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of 1x19 7x7 7x19 stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.

Benefits

Types Material Sizes Finish

- Built with Micro Stretch Technology (MST), the Minimum Breaking Strength (MBS) is 20-30% higher than conventional 1x19 wire of the same size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.

: : : :

Compact wire strand in constructions 1x7, 1x19, 1x25 316 Stainless Steel 1.6mm - 12mm Bright and smooth for increased corrosion resistance.

• Wire types: Anzor 316 wire. • Wire types: 1x19, 7x7, 7x19.

Application: Predominantly used for structural cables, e.g glass facades

• Wire sizes: 3mm - 6mm.

Specific features: - Extremely non-flexible. - High breaking strain. - Extremely low stretch.

High tensile rods systems

- Smooth clean finish. - No pre-stress required.

S7801 LH Swage Stud: page 98

Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic

HAMMA X-STRAND

bath to remove any impuritie s that may have attache d during Benefits Enhanced corrosion resistance. Produced with a high level manufacture . This makesofHamma cable unique in removal raising ultimate descaling and ultrasonic of impurities. corrosion resistance for extreme harsh and severe local conditions as corrosion Resulting in longer lasting shine and ultimate resistance, better for NZ’s harsh corrosive well as increased work life due to the multiple annealing processes,conditions. ensuring longevity of the wire. Hamma cables are ensured of superior Material 316excellent Stainless Steel brightness and smooth aesthetic finish due to : an surface Sizes : 1x19 : 0.8mm 19mm (rigid),- 7x7 (semi-flexible), 7x19 (flexible) exterior.Types Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)

+

S7801 RH Swage Stud: page 98

+

HAMMA PRO-STRAND Finish : Bright and smooth for increased corrosion resistance. Benefits

Application: Balustrades, shade sails, foliage trellises, and architectural rigging. (MST), the Minimum Breaking - Built with Micro Stretch Technology for than exterior use in coastal Strength (MBS)Recommended is 20-30% higher conventional 1x19areas. wire of the same size. This means that you can downsize the structural cable Code: MFW...U and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which Maintenance: Wire rope must be cleaned & maintained regularly. can be significant on large projects. See our Maintenance & Cleaning guidelines on p.21.

Swage stud at each end

Types Material Sizes Finish

: : : :

Compact wire strand in constructions 1x7, 1x19, 1x25 316 Stainless Steel 1.6mm - 12mm Benefits - Designed for large structural projects. To date this is the largest Bright and smooth for increased corrosion stainless steel strand on the resistance. market.

HAMMA MEGA-STRAND

• Wire material: 316 or 316 Ultra. • Wire sizes: 2.5mm - 10mm.

• Swaging: hex swaged (by hand tool) or roll swaged.

• Wire types: 1x19, 7x7, 7x19.

• Application: suited for static applications e.g. flag poles, balustrades, staircases, and straight line installations.

Application: Predominantly used for structural cables, e.g glass facades Types : A conventional 1x37 and 1x61 construction wire stand. Material : 316 Stainless Steel Specific features: Sizes non-flexible. : 20mm - 42mm. High tensile rods systems - Extremely - Smooth clean finish. : Bright and smooth for increased corrosion resistance. - High Finish breaking strain. - No pre-stress required. Application: Large structural projects, such as bridges. - Extremely low stretch.

with Micro-stretch Technologies.

1x7

1x19

Specific features: - Low stretch. Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages during the drawing process to ensure wire - Higher comparative breaking strain. cable systems. Hamma cables are develope d exclusivel y for high does not work harden, and finished by passing through an ultrasonic Wide cable size range. Enhanced Produced aswaging. high level tensile performances through unique techniques that differentiate from Benefits bath to - remove any impuritieresistance. s with that both may have with attache d during Compatible splicing and - corrosion of .descaling and Hamma ultrasonic removal of impurities. other1x19 manufactures. Hamma cables start with the highest quality of manufacture This makes cable unique in raising ultimate - Good corrosion resistance. 7x7 7x19 Resulting in longer lasting shine and ultimate corrosion stainless steel source follow by unique descaling of stainless steel 1x61 rod corrosion resistance for extreme harsh and severe local conditions as 1x37 resistance, better for NZ’s harsh corrosive conditions. to remove impurities, which may have attached during transport, prior to well as increased work life due to the multiple annealing processes, commencing production. ensuring: longevity of theSteel wire. Hamma cables are ensured of superior Material 316 Stainless aesthetic: finish to an excellent surface brightness and smooth Sizes 0.8mmdue - 19mm : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior.Types Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)

S3121P Jaw/Swage Turnbuckle to tension wire: page 96

Wire Rope in 316 or 316 Ultra: page 104

HAMMA X-STRAND

+

S7803 Swage Fork Terminal: page 97

+

with Ultimate Structural cable

Finish : Bright and smooth for increased corrosion resistance. HAMMA PRO-STRAND

Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Benefits - Built with Micro Stretch Technology (MST), the Minimum Breaking Recommended for exterior use in coastal areas. Strength (MBS) is 20-30% higher than conventional 1x19 wire of the same size. This means that you can downsize the structural cable Code: MFW...U and maintain the strength. This results in improved aesthetics, less Maintenance:weight Wire in rope be cleaned & maintained themust structure, and cost savings on regularly. smaller fittings, which can be our significant on large projects. guidelines on p.21. See Maintenance & Cleaning

JAW TURNBUCKLE

HAMMA MEGA-STRAND Types Material Benefits Sizes Finish

: : -: :

Compact wire strand in constructions 1x7, 1x19, 1x25 316 Stainless Steel Designed for large structural projects. To date this is the largest 1.6mm - 12mm stainless steel strand the market. Bright and smooth foron increased corrosion resistance.

• Wire material: 316 or 316 Ultra. • Wire sizes: 2.5mm - 10mm.

• Swaging: hex swaged (by hand tool) or roll swaged.

• Wire types: 1x19, 7x7, 7x19.

• Application: suited for membrane structures or shade sails subject to dynamic forces.

Application: cables, e.g glass facades Types : Predominantly A conventional used 1x37 for andstructural 1x61 construction wire stand. Material : 316 Stainless Steel Specific features: Sizes : 20mm - 42mm. - Extremely non-flexible. - Smooth clean finish. Finish : Bright and smooth for increased corrosion resistance. - HighLarge breaking strain.projects, - such No pre-stress required. Application: structural as bridges. - Extremely low stretch. Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. with both splicing and swaging. Benefits- Compatible - Enhanced corrosion resistance. Produced with a high level - Good of corrosion descaling resistance. and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.

with Micro-stretch Technologies.

1x7

1x19

Wire Rope in 316 or 316 Ultra: page 104

S3121/5 Toggle/Swage Turnbuckle to tension wire: page 95

S7805 Swage Toggle Terminal: page 97

HAMMA X-STRAND

with Ultimate Structural cable

+ 1x19

7x7

7x19

1x37

+

1x61

Material Sizes Types Finish

: : : :

316 Stainless Steel 0.8mm - 19mm 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Bright and smooth for increased corrosion resistance.

Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas. Code:

toggle TURNBUCKLE

MFW...U

Maintenance:

Wire rope must be cleaned & maintained regularly. See our Maintenance & Cleaning guidelines on p.21.

WIRE RIGGING SYSTEMS

HAMMA MEGA-STRAND Benefits

- Designed for large structural projects. To date this is the largest stainless steel strand on the market.

Types : Material : Sizes : Finish : Application:

A conventional 1x37 and 1x61 construction wire stand. 316 Stainless Steel 20mm - 42mm. Bright and smooth for increased corrosion resistance. Large structural projects, such as bridges.

Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.

WIRE RIGGING SYSTEMS with Ultimate Structural cable

1x37

1x61


Sizes Finish

: 1.6mm - 12mm : Bright and smooth for increased corrosion resistance.

Application: Predominantly used for structural cables, e.g glass facades

Online catalogue: www.anzor.co.nz/wire-rigging with Micro-stretch Technologies.

1x7

1x19

Specific features: - Extremely non-flexible. - High breaking strain. - Extremely low stretch.

- Smooth clean finish. - No pre-stress required.

94

HAMMA X-STRAND Benefits

1x19

7x7

7x19

- Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.

• Wire type: HAMMA Pro-Strand or Mega-Strand. • Installation: Wire can be tensioned from one end. Material Sizes Types Finish

: : : :

316 Stainless Steel 0.8mm - 19mm 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Bright and smooth for increased corrosion resistance.

• Wire material: 316 stainless steel.

• Applications: membrane structures, glass facades, structural cabling (e.g. pedestrian bridges).

• Wire sizes: 8mm - 42mm.

Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas. Code:

HAMMA High Tensile 316 Wire - page 104

Maintenance:

Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are develope d exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.

High tensile rods systems

MFW...U

P2H Adjuster Unit to tension wire: page 101

Wire rope must be cleaned & maintained regularly. See our Maintenance & Cleaning guidelines on p.21.

Multiple annealing stages during the drawing process to ensure wire by passing through an ultrasonic

HAMMA MEGA-STRAND does not work harden, and finished

+

+

P2H Adjuster Unit page 101

bath to - remove anylarge impuritie s projects. that may have d during Benefits Designed for structural To date this isattache the largest stainless strandHamma on the market. manufacture . Thissteel makes cable unique in raising ultimate corrosion: resistance for1x37 extreme harsh and severe local conditions as Types A conventional and 1x61 construction wire stand. well as increased work life due to the multiple annealing processes, Material : 316 Stainless Steel Sizes 20mm - 42mm. ensuring : longevity of the wire. Hamma cables are ensured of superior Finish : Bright and smooth for increased corrosion resistance. aesthetic finish due to projects, an excellent Application: Large structural such assurface bridges. brightness and smooth exterior.Types

: 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)

Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging.

HAMMA PRO-STRAND with Ultimate Structural cable

1x37

corrosion resistance. Benefits - Good - Built with Micro Stretch Technology (MST), the Minimum Breaking Strength (MBS) is 20-30% higher than conventional 1x19 wire of the same size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.

1x61

P2H Adjuster - With hamma high tensile HAMMA wire Types Material Sizes Finish

• Installation: Not for the faint of heart. Wire has to be turned simultaneously from both ends to tension.

: : : :

Compact wire strand in constructions 1x7, 1x19, 1x25 316 Stainless Steel 1.6mm - 12mm Bright and smooth for increased corrosion resistance.

Application: Predominantly used for structural cables, e.g glass facades Specific features: - Extremely non-flexible. - High breaking strain. - Extremely low stretch.

with Micro-stretch Technologies.

1x7

• Wire type: Anzor 316 wire.

• Wire material: 316 stainless steel.

• Applications: used in a criss cross formation in an bracing application.

• Wire sizes: 3mm - 8mm.

1x19

- Smooth clean finish. - No pre-stress required.

High tensile rods systems

RDS LH Adjuster Unit: page 100

Wire Rope in 316 or 316 Ultra: page 104

HAMMA X-STRAND

Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable1x19 systems. 7x7Hamma 7x19 cables are develope d exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.

Benefits - Enhanced corrosion Produced a high level Multiple annealing stages duringresistance. the drawing processwith to ensure wire of descaling and finished ultrasonic impurities. does not work harden, and by removal passing of through an ultrasonic Resulting in longer lasting ultimate corrosion bath to remove any impuritie s thatshine mayand have attache d during resistance, betterHamma for NZ’scable harshunique corrosive conditions. manufacture . This makes in raising ultimate corrosion resistance for extreme harsh and severe local conditions as Material : 316 Stainless Steel well as increased work life due to the multiple annealing processes, Sizes : 0.8mm - 19mm ensuring longevity of the7x7 wire. Hamma cables are(flexible) ensured of superior Types : 1x19 (rigid), (semi-flexible), 7x19 aesthetic : finish an excellent surfacecorrosion brightness and smooth Finish Brightdue andtosmooth for increased resistance. : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior.Types

+

+

RDS RH Adjuster Unit: page 100

Application: Balustrades, shade sails, foliage trellises, and HAMMA PRO-STRAND architectural rigging.

Recommended for exterior use in coastal areas. Benefits - Built with Micro Stretch Technology (MST), the Minimum Breaking Code: MFW...U Strength (MBS) is 20-30% higher than conventional 1x19 wire of the Maintenance:same Wire rope must be cleaned maintained size. This means that you&can downsizeregularly. the structural cable andSee maintain the strength. results in improved aesthetics, less our Maintenance & This Cleaning guidelines on p.21. weight in the structure, and cost savings on smaller fittings, which

RDS FORK + PBI SWAGE STUD be significant on large projects. HAMMAcanMEGA-STRAND

Benefits :- Compact Designedwire for large structural projects.1x7, To date is the largest strand in constructions 1x19,this 1x25 Types stainless steel strand on the market. Material : 316 Stainless Steel Sizes : 1.6mm - 12mm Types A conventional 1x37 1x61 construction wire stand. Finish :: Bright and smooth forand increased corrosion resistance. Material : 316 Stainless Steel Application: Sizes : Predominantly 20mm - 42mm.used for structural cables, e.g glass facades Finish : Bright and smooth for increased corrosion resistance. Specific features: Application: Large structural projects, such as bridges. - Extremely non-flexible. - Smooth clean finish. Specific- features: High breaking strain. - No pre-stress required. Low stretch. -- Extremely low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance. Benefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.

• Wire types: Anzor 316 wire.

• Application: horizontal wire, roof plane (criss cross bracing) and vertically hanging applications with the swage fork visible.

• Wire types: 1x19, 7x7, 7x19. • Wire sizes: 3mm - 6mm.

with Micro-stretch Technologies.

1x7

1x19

Wire Rope in 316 or 316 Ultra: page 104

S7801 RH Swage Stud: page 99

HAMMA X-STRAND

with Ultimate Structural cable

1x37

+ 1x19

7x7

S7803 Swage Fork Terminal: page 99

1x61

+

7x19

Material Sizes Types Finish

: : : :

316 Stainless Steel 0.8mm - 19mm 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Bright and smooth for increased corrosion resistance.

Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.

Swage fork terminal + SWAGE Stud Code:

MFW...U

Maintenance:

Wire rope must be cleaned & maintained regularly. See our Maintenance & Cleaning guidelines on p.21.

HAMMA MEGA-STRAND Benefits

- Designed for large structural projects. To date this is the largest stainless steel strand on the market.

Types : Material : Sizes : Finish : Application:

A conventional 1x37 and 1x61 construction wire stand. 316 Stainless Steel 20mm - 42mm. Bright and smooth for increased corrosion resistance. Large structural projects, such as bridges.

WIRE RIGGING SYSTEMS

Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.

with Ultimate Structural cable

1x37

1x61


TOGGLE/SWAGE TURNBUCKLES

S3121/5 TOGGLE/SWAGE Turnbuckle A toggle end is the preferred choice for membrane structures as it can move in two directions.

EX-STOCK SUBJEC T TO PR IOR SALE

S3121/5 Technical Features •

Material: 316 Stainless Steel.

Application: suited to membrane structures subject to dynamic forces. Swaging: hex swaged (by hand tool) for 2.5, 3.0 & 4.0mm* wire, or alternatively roll swaged by a professional rigger.

L1 M

Wire sizes: 2.5mm - 10mm.

L OD

Hand tool for swaging 5.0mm wire available on request. NB: There may be a lead time.

Code

Size M (mm)

Wire Ø (mm)

L (mm)

L1 (mm)

OD (mm)

Accessory

MFTBPTSM605

M5

2.5*

155

80

5.5

Ring

600

MFTBPTSM606

M6

3.0*

172

90

6.3

Ring

1,000

MFTBPTSM608

M8

4.0*

210

105

7.5

Ring

1,400

MFTBPTSM610

M10

5.0

246

125

9.1

Ring

2,200

MFTBPTSM612

M12

6.0

296

150

12.5

Ring

4,000

MFTBPTSM616

M16

8.0

386

190

16.1

Cotter pin

6,500

MFTBPTSM620

M20

10.0

422

210

17.8

Cotter pin

8,500

Breaking Load (kgs)

Safe working load - Standard safety factor for working load is 25% of Breaking Load

Online catalogue: www.anzor.co.nz/wire-rigging www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd

95


JAW/SWAGE TURNBUCKLES

S3121P JAW/SWAGE Turnbuckle A jaw end is rigid and suited to `straight-line’ applications where the wire rig isn’t subject to significant external forces E.g. It is suited to flag poles, but not suited to shade sails.

M

EX-STOCK SUBJEC T TO PR IOR SALE

S3121/5 Technical Features

L1

Wire sizes: 2.5mm - 8mm.

Material: 316 Stainless Steel. Application: Suited to static applications E.g. balustrades, staircases, flag poles and straight line installations. Swaging: hex swaged (by hand tool) for 2.5, 3.0 & 4.0mm* wire, or alternatively roll swaged by a professional rigger.

OD

L OD

Hand tool for swaging 5.0mm wire available on request. NB: There may be a lead time.

Size M (mm)

Wire Ø (mm)

MFTBPJSMM605

M5 mini

MFTBPJSMM606

M6 mini

MFTBPJSM605 MFTBPJSM606

L (mm)

L1 (mm)

OD (mm)

Accessory

Breaking Load (KGS)

3.0*

107

50

-

Ring

750

4.0*

133

60

-

Ring

1,200

M5

2.5*

150

80

5.5

Ring

600

M6

3.0*

170

90

6.3

Ring

1,000

MFTBPJSM608

M8

4.0*

205

105

7.5

Ring

1,400

MFTBPJSM610

M10

5.0

240

125

9.1

Ring

2,200

MFTBPJSM612

M12

6.0

295

150

12.5

Ring

4,000

MFTBPJSM616

M16

8.0

370

190

16.1

Cotter pin

6,500

Code

Safe working load - Standard safety factor for working load is 25% of Breaking Load

S3121P With threaded stud into concrete see p.50 for details

96

Online catalogue: www.anzor.co.nz/wire-rigging Information used exclusively under permission of Strudyna Co. Ltd


SWAGE TERMINALS

s7805 - TOGGLE/SWAGE TERMINAL A

A

EX-STOCK SUBJEC T TO PR IOR SALE

D

B

L

F Code

Wire Ø (mm)

A (mm)

B (mm)

D (mm)

F (mm)

L (mm)

Accessory

Breaking Load (KGS)

MFSWTT603

3.0

6

7

6.35

3.30

3.30

Ring

670

MFSWTT604

4.0

8

10

7.54

4.30

4.30

Ring

1,400

MFSWTT605

5.0

9

12

9.12

5.30

5.30

Ring

1,700

MFSWTT606

6.0

12

13

12.54

6.35

6.35

Ring

4,000

MFSWTT608

8.0

16

17

16.13

8.40

8.40

Cotter pin

7,000

MFSWTT610

10.0

19

20

17.85

10.50

10.50

Cotter pin

7,500

Safe working load - Standard safety factor for working load is 25% of Breaking Load

S7803 - FORK/SWAGE TERMINAL A

EX-STOCK SUBJEC T TO PR IOR SALE

D

A

B

L L1

F Code

Wire Ø (mm)

A (mm)

MFSWFT4025

2.5

MFSWFT403

3.0

MFSWFT404

B (mm)

D (mm)

F (mm)

L (mm)

L1 (mm)

Accessory

Breaking Load (KGS)

5.00

7.0

5.53

2.70

62.0

35

Ring

700

6.00

8.0

6.35

3.30

68.0

38

Ring

1,250

4.0

8.00

11.0

7.54

4.30

77.0

45

Ring

1,800

MFSWFT405

5.0

9.00

12.0

9.12

5.30

87.0

51

Ring

2,650

MFSWFT406

6.0

12.00

14.5

12.54

6.35

109.0

64

Ring

4,000

MFSWFT408

8.0

14.28

15.0

16.13

8.40

148.0

80

Cotter pin

6,500

Safe working load - Standard safety factor for working load is 25% of Breaking Load

Online catalogue: www.anzor.co.nz/wire-rigging www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd

97


Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages during the drawing process to ensure wire High tensile rods systems cable systems. Hamma cables are develope d exclusivel y for high does not work harden, and finished by passing through an ultrasonic tensile performances through unique techniques that differentiate from bath to remove any impuritie s that may have attache d during other manufactures. Hamma cables start with the highest quality of manufacture . This makes Hamma cable unique in raising ultimate stainless steel source follow by unique descaling of stainless steel rod corrosion resistance for extreme harsh and severe local conditions as Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages during the drawing process to ensure wire to remove impurities, which may have attached during transport, prior to well as increased work life due to the multiple annealing processes, cable systems. Hamma cables are develope d exclusivel y for high does not work harden, and finished by passing through an ultrasonic commencing production. ensuring longevity of the wire. Hamma cables are ensured of superior tensile performances through unique techniques that differentiate from bath to remove any impuritie s that may have attache d during aesthetic finish due to an excellent brightness and ultimate smooth other manufactures. Hamma cables start with the highest quality of manufacture . This makes Hammasurface cable unique in raising Types resistance : 1x19for(rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior.corrosion stainless steel source follow by unique descaling of stainless steel rod extreme harsh and severe local conditions as

SWAGE STUD AT EACH END

well as increased work life due to the multiple annealing processes, HAMMA PRO-STRAND ensuring longevity of the wire. Hamma cables are ensured of superior

to remove impurities, which may have attached during transport, prior to commencing production.

aesthetic finish due to an excellent surface brightness and smooth : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior.Types

- Built with Micro Stretch Technology (MST), the Minimum Breaking

Benefits

EX-STOCK SUBJEC T TO PR IOR SALE

HAMMA PRO-STRAND Strength (MBS) is 20-30% higher than conventional 1x19 wire of the

SWAGE STUD AT EACH same size. This meansEND that you can downsize the structural cable

and maintain the strength. This results in improved aesthetics, less - Built with Micro Stretch Technology (MST), the Minimum Breaking weight in the structure, and cost savings on smaller fittings, which Strength (MBS) is 20-30% higher than conventional 1x19 wire of the can besame significant largethat projects. size. Thison means you can downsize the structural cable

Benefits

S7801 LH Swage Stud

: Bright and smooth for increased corrosion resistance.

Finish

Specific features: Adjust by tightening the hex nuts at each end. Application: Predominantly used for structural cables, e.g glass facades - Extremely non-flexible. - Smooth clean finish. Pin-to-Pin Specific - High features: breaking strain. - No pre-stress required. Middle- adjustment - Extremely non-flexible. - Smooth clean finish. Extremely low stretch.

1x19 1x7

- High breaking strain. - Extremely low stretch.

1x19

Anzor 316 1x19 Wire 1x19

7x7

7x19

1x19

7x7

: 316 Stainless Steel

Sizes Predominantly : 1.6mm - 12mm Application: used for structural cables, e.g glass facades

with Micro-stretch Technologies.

1x7

and maintain the strength. This results in improved aesthetics, less

Compact wire strand in constructions 1x7, 1x19, 1x25fittings, which weight in the structure, and cost savings on smaller can be significant 316 Stainless Steel on large projects. 1.6mm - 12mm : Compact wire strand in constructions 1x7,resistance. 1x19, 1x25 Bright and smooth for increased corrosion

Material

Ø Wire

with Micro-stretch Technologies.

S7801 RH Swage Stud

Wire

: Types Material : Sizes : Finish Types:

- No pre-stress required.

HAMMA X-STRAND Technical Features

HAMMA X-STRAND Benefits - Enhanced corrosion resistance. Produced with a high level • A low cost, wire tensioning system, without the cost of a and ultrasonic removal of impurities. Benefitsof descaling - Enhanced corrosion resistance. Produced with a high level of descaling andlasting ultrasonic removal of impurities. turnbuckle. Hex nuts at each end perform the tensioning. Resulting in longer shine and ultimate corrosion Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.

7x19

better for NZ’s harsh corrosive conditions. Material:resistance, 316 Stainless Steel.

Material : 316 Stainless Steel : 316 Stainless Steel(p.105) or 316 Ultra wire (p.106) • Material Wire: Anzor 316 wire Sizes Sizes: 0.8mm - 19mm : 0.8mm - 19mm Types : 1x19: (rigid), 7x7 (semi-flexible), 7x19 (flexible) • Types Application: Suited to static applications 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Finish Finish : Bright and smooth for increased corrosion resistance. : Bright and smooth for increased corrosion resistance. e.g. staircases and straight line installations. Balustrades, shade sails, foliage trellises, and • Application: Swaging: hex shade swaged (by hand tool)and for 3.0 & 4.0mm* Application: Balustrades, sails, foliage trellises, architectural rigging. rigging. wire,architectural or alternatively roll swaged by a professional rigger. Recommended for exterior coastalareas. areas. Recommended for exterior useuse in in coastal

Page 105 Wire characteristics & breaking loads - please see p.105

Code:

Hand Code:

toolMFW...U for swaging 5.0mm wire available on request. MFW...U NB: there may be a lead time.

Maintenance:

Maintenance:

S7801 SWAGE STUD

One hex nut is supplied per stud for tensioning the wire.

Wire rope must be cleaned & maintained regularly.

Wire rope must be cleaned & maintained regularly. See our Maintenance & Cleaning guidelines on p.21. See our Maintenance & Cleaning guidelines on p.21.

HAMMA MEGA-STRAND

HAMMA Benefits MEGA-STRAND - Designed for large structural projects. To date this is the largest

stainless steel strand on the market. - Designed for large structural projects. To date this is the largest stainless steel strand on the market. Types : A conventional 1x37 and 1x61 construction wire stand.

Benefits

OD : 316 Stainless Steel Material Types Sizes: A conventional 1x37 and 1x61 construction wire stand. : 20mm - 42mm. Material Steel Finish: 316 :Stainless Bright and smooth for increased corrosion resistance. L1 L2 structural projects, such as bridges. Sizes Application: : 20mmLarge - 42mm. Finish Specific : Bright and smooth for increased Lcorrosion resistance. features: Application: Large projects, such as bridges. - Low structural stretch.

M

- Higher comparative breaking strain.

with Ultimate Structural cable

with Ultimate Structural cable

MFSWS4W03.0M05 MFSWS4W03M06 1x37

1x37

1x61

1x61

3.0 3.0

96mm

M6

OD (mm) 6.3

97

38

48

6.3

MFSWS4W04M06

4.0

96mm

M6

110

45

48

7.5

MFSWS4W04M08

4.0

108mm

M8

115

45

54

7.5

MFSWS4W05M10

5.0

122mm

M10

128

52

61

9.1

MFSWS4W06M12

6.0

158mm

M12

162

63

79

12.5

installation

Tighten hex nut to tension wire.

98

Wire Ø (mm)

Code

Specific features: - Wide cable size range. - Low -stretch. Compatible with bothLsplicing and Adjustment Thread M L1 swaging. L2 - Higher comparative - Good corrosion breaking resistance.strain. +/- - Wide cable (mm) (mm) (mm) (mm) size range. with both splicing and32 swaging. 40 80mm- CompatibleM5 80 - Good corrosion resistance.

Nylon isolating washer with a stainless washer (sold separately) and hex nut.

Steel channel or similar - supplied by others.

Online catalogue: www.anzor.co.nz/wire-rigging Information used exclusively under permission of Strudyna Co. Ltd


SWAGE FORK TERMINAL + STUD

EX- STOCK SUB JEC T TO PRIOR SALE

Swage fork terminal + SWAGE Stud S7803 Fork Terminal

S7801 Swage Stud

Wire

Ø Wire

Pin-to-Pin Middle adjustment

S7803 Fork Terminal

Technical Features •

Low cost, simple wire rigging system.

Material: 316 Stainless Steel.

Wire: Anzor 316 wire (p.105) or 316 Ultra wire (p.106)

Application: Suited to static applications e.g. balustrades, staircases and straight line installations.

Swaging: hex swaged (by hand tool) for 3.0 & 4.0mm* wire, or alternatively roll swaged by a professional rigger.

See p.97 for dimensions & breaking loads.

Hand tool for swaging 5.0mm wire available on request. NB: there may be a lead time. High tensile rods systems

S7801 RH SWAGE STUD

Strudyna isOne proudhex to offer cables asper part stud of Strudyna's tensile Multiple annealing stages during the drawing process to ensure wire nutHamma is supplied for tensioning the wire. High tensile rods systems cable systems. Hamma cables are develope d exclusivel y for high does not work harden, and finished by passing through an ultrasonic tensile performances through unique techniques that differentiate from bath to remove any impuritie s that may have attache d during other manufactures. Hamma cables start with the highest quality of manufacture . This makes Hamma cable unique in raising ultimate stainless steel source follow by unique descaling of stainless steel rod corrosion resistance for extreme harsh and severe local conditions as Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages OD during the drawing process to ensure wire to remove impurities, which may have attached during transport, prior to well as increased work life due to the multiple annealing processes, cable systems. Hamma cables are develope d exclusivel y for high does not work harden, and finished by passing through an ultrasonic commencing production. ensuring longevity of the wire. Hamma cables are ensured of superior tensile performances through unique techniques that differentiate from bath to remove any impuritie s that may have attache d during aesthetic finish due to an excellent brightness and ultimate smooth other manufactures. Hamma cables start with the highest quality of manufacture . This makes Hammasurface cable unique inL1 raising Types resistance : 1x19for(rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior.corrosion stainless steel source follow by unique descaling of stainless steel rod extreme harsh and severe local conditions as

M L2

well as increased work life due to the multiple annealing processes, HAMMA PRO-STRAND ensuring longevity of the wire. Hamma cables are ensured of superior

L

to remove impurities, which may have attached during transport, prior to commencing production.

Benefits

aesthetic finish due to an excellent surface brightness and smooth : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior.Types

- Built with Micro Stretch Technology (MST), the Minimum Breaking

HAMMA PRO-STRAND Strength (MBS) is 20-30% higher than conventional 1x19 wire of the

Wire Ø Adjustment Thread M the L L1 same size. This means that you can downsize structural cable maintain the strength. This results in improved aesthetics, less (mm) Benefitsand (mm) (mm) (mm) - Built+/with Micro Stretch Technology (MST), the Minimum Breaking weight in the structure, and cost savings on smaller fittings, which

Code

with Micro-stretch Technologies.

Strength (MBS) is 20-30% higher than conventional 1x19 wire of the

L2 (mm)

OD (mm)

MFSWS4W03.0M05

3.0

can besame significant largethat projects. size. Thison means you can downsize the structural cable

32

40

6.3

MFSWS4W03M06

Compact wire strand in constructions 1x7, 1x19, 1x25fittings, which weight in the structure, and cost savings on smaller 48mm M6 97 38 can be significant 316 Stainless Steel on large projects. 1.6mm - 12mm 48mm M6 110 45 : Compact wire strand in constructions 1x7, 1x19, 1x25 Bright and smooth for increased corrosion resistance.

48

6.3

MFSWS4W04M06

: : Sizes : 4.0 Finish Types:

48

7.5

40mm

Types

3.0 Material

M5

80

and maintain the strength. This results in improved aesthetics, less

MFSWS4W04M08

Material : 316 Stainless Steel Sizes Predominantly : 1.6mm - 12mm Application: used for structural cables, e.g glass facades Finish : Bright and smooth for increased corrosion resistance.

4.0

45

54

7.5

MFSWS4W05M10

Specific features: Application: Predominantly structural cables, e.g glass 5.0 61mm used -forSmooth M10 128facades - Extremely non-flexible. clean finish.

52

61

9.1

1x7 1x19 MFSWS4W06M12

6.0

63

79

12.5

with Micro-stretch Technologies.

1x7

1x19

57mm

M8

115

Specific - High features: breaking strain. - No pre-stress required. - Extremely non-flexible. - Smooth clean finish. - Extremely low stretch. - High breaking strain. - No pre-stress required. - Extremely low stretch.

79mm

M12

162

HAMMA X-STRAND

1x19

7x7

7x19

1x19

7x7

HAMMA X-STRAND Benefits - Enhanced corrosion resistance. Produced with a high level and ultrasonic removal of impurities. Benefitsof descaling - Enhanced corrosion resistance. Produced with a high level of descaling andlasting ultrasonic removal of impurities. Resulting in longer shine and ultimate corrosion Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.

INSTALLATION Tighten hex nut to tension wire. Anzor 316resistance, 1x19 Wire better for NZ’s harsh corrosive conditions.

7x19

Material : 316 Stainless Steel Material : 316 Stainless Steel Sizes : 0.8mm - 19mm

Page 105

Sizes : 0.8mm - 19mm Wire characteristics &(semi-flexible),7x19 Types 7x7 (semi-flexible), (flexible) Types: 1x19: (rigid), 1x19 (rigid), 7x7 7x19 (flexible) Finish Finish: Bright smooth for increased corrosion : Bright and smooth for increased corrosionresistance. resistance. breaking loadsand- see p.105 Application: Balustrades, shade sails, foliage trellises,and and Application: Balustrades, shade sails, foliage trellises, architectural rigging. architectural rigging. Recommended for exterior use in coastal areas. Recommended for exterior use in coastal areas.

Code:

Code:

MFW...U

MFW...U

Maintenance:

Wire rope must be cleaned & maintained regularly.

Online catalogue: www.anzor.co.nz/wire-rigging www.anzor.co.nz/arch Maintenance:

Wire rope must be cleaned & maintained regularly. See our Maintenance & Cleaning guidelines on p.21. See our Maintenance & Cleaning guidelines on p.21.

HAMMA MEGA-STRAND Information used exclusively under permission of Strudyna Co. Ltd

HAMMA MEGA-STRAND

See p.98 for installation details.

99


ROD DYNAMIC SWAGE SYSTEM

RDS CABLE SYSTEM RdS adjustable fork + PBI Swage stud

High tensile rods systems

Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages during the drawing process to ensure wire High tensile rods systems cable systems. Hamma cables are develope d exclusivel y for high does not work harden, and finished by passing through an ultrasonic Cable System Features tensile performances through unique techniques that differentiate from bath toRDS remove any impuritie s thatTechnical may have attache d during K EX-STOC other manufactures. Hamma cables start with the highest quality of manufacture . This makes Hamma cable unique in raising ultimate • Attractive look as the threads are hidden. SUBJEC T stainless steel source follow byIOR unique descaling of stainless steel rod corrosion resistance for extreme harsh and severe local conditions as PR Strudyna isTO proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages during the drawing process to ensure wire to remove impurities, whichSA may well as • increased work life due to the multiple processes, LE have attached during transport, prior to Made from passivated 316 annealing Stainless Steel for enhanced cable systems. Hamma cables are develope d exclusivel y for high does not work harden, and finished by passing through an ultrasonic commencing production. ensuring longevity of the wire. Hamma cables are ensured of superior tensile performances through unique techniques that differentiate from bath to remove any impuritie s that may have attache d during corrosion resistance. aesthetic finish due to an excellent brightness and ultimate smooth other manufactures. Hamma cables start with the highest quality of manufacture . This makes Hammasurface cable unique in raising Types resistance : 1x19for(rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior.corrosion stainless steel source follow by unique descaling of stainless steel rod extreme harsh and severe local conditions as

Installation: not for the faint of heart. Full cable must be

well as increased work life due to the multiple annealing processes, HAMMA PRO-STRAND ensuring longevity of the wire. Hamma cables are ensured of superior

to remove impurities, which may have attached during transport, prior to commencing production.

turned by two people, one at each end.

Benefits

aesthetic finish due to an excellent surface brightness and smooth Types : 1x19 (rigid), (semi-flexible), 7x19 (flexible) Recommended for 7x7 advanced installers only. exterior.

- Built with Micro Stretch Technology (MST), the Minimum Breaking

HAMMA PRO-STRAND Strength (MBS) is 20-30% higher than conventional 1x19 wire of the •

Wire: Anzor 316 Ultra wire - page 106.

same size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less Benefits - Built with Micro Stretch Technology (MST), the Minimum Breaking weight in the structure, and cost savings on smaller fittings, which Strength (MBS) is 20-30% higher than conventional 1x19 wire of the can besame significant largethat projects. size. Thison means you can downsize the structural cable improved Stud aesthetics, less PBI inSwage Wireand maintain the strength. This results

RDS Fork (p.76)

: Compact Types wire strand in constructions 1x7, 1x19, 1x25fittings, which weight in the structure, and cost savings on smaller can be significant Ø Wire Material : 316 Stainless Steel on large projects. Sizes : 1.6mm - 12mm : Compact wire strand in constructions 1x7,resistance. 1x19, 1x25 Finish Types: Bright and smooth for increased corrosion Material 316 Stainless Steel Tension by turning both swage: terminals simultaneously. Sizes Predominantly : 1.6mm - 12mm Application: used for structural cables, e.g glass facades Finish

with Micro-stretch Technologies.

with Micro-stretch Technologies.

1x7

1x19 1x7

1x19

Anzor 316 ULTRA Wire 1x19

7x7

7x19

1x19

7x7

: Bright and smooth for increased corrosion resistance.

Specific features: Application: Predominantly used for structural cables, e.g glass facades -Pin-to-Pin Extremely non-flexible. - Smooth clean finish. Specific - High features: breaking strain. - No pre-stress required. Middle adjustment - Extremely non-flexible. - Smooth clean finish. - Extremely low stretch. - High breaking strain. - Extremely low stretch.

- No pre-stress required.

HAMMA X-STRAND For full RDS Fork technical details, Breaking Loads and HAMMA X-STRAND Benefits - Enhanced corrosion resistance. Produced with a high level Coupling Plates - see p.79 - 84. and ultrasonic removal of impurities. Benefitsof descaling - Enhanced corrosion resistance. Produced with a high level of descaling andlasting ultrasonic removal of impurities. Resulting in longer shine and ultimate corrosion Resulting in Wire longer lasting shine and ultimate corrosion resistance, better for NZ’s corrosive conditions. Fork + Stud Size Ø harsh Wire type Adjustment resistance, better for NZ’s harsh corrosive conditions.

7x19

(mm)

+/-

Material : 316 Stainless Steel Material : 316 Stainless Steel Sizes Sizes - 19mm 3/8”: 0.8mm UNF 1x19 19mm : 0.8mm - 19mm5.0 Types Types: 1x19: (rigid), 7x7 (semi-flexible), 7x19 (flexible) 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Finish Finish and smooth for increased corrosion 1/2”: Bright UNF 6.0 1x19 30mm : Bright and smooth for increased corrosionresistance. resistance.

Page 106 Wire characteristics & breaking loads - please see p.106

5/8” Balustrades, UNFBalustrades, 8.0 1x19 Application: shade sails, foliage trellises,and and 35mm Application: shade sails, foliage trellises,

architectural rigging. architectural rigging. *Minimum BreakingRecommended Load (MBL) - after minimum breaking load of cable assembly. for swaging exterior coastal areas. Recommended for exterior useuse in in coastal areas. *For information on Safe Working Loads, go to p.105. Code: MFW...U

Code:

MFW...U

Maintenance:

Maintenance:

Wire rope must be cleaned & maintained regularly.

Wire rope must be cleaned & maintained regularly. See our Maintenance & Cleaning guidelines on p.21. See our Maintenance & Cleaning guidelines on p.21.

HAMMA MEGA-STRAND

Loctite 243

HAMMA MEGA-STRAND Benefits - Designed for large structural projects. To date this is the largest Maintenance & Cleaning

We recommend applying Loctite 243 to the pin, washer & screw set for permanent fixture.

Benefits

stainless steel strand on the market. - Designed for large structural projects. To date this is the largest

Regular and cleaning is required to stainlessmaintenance steel strand on the market. maintain appearance.

Types : A conventional 1x37 and 1x61 construction wire stand. Material : 316 Stainless Steel Types Sizes: A conventional 1x37 and 1x61 construction wire stand. : 20mm - 42mm. Material Steel Finish: 316 :Stainless Bright and smooth for increased corrosion resistance. structural projects, such as bridges. Sizes Application: : 20mmLarge - 42mm.

See p.21 for Anzor’s Cleaning & Maintenance Guide.

Finish Specific : Bright and smooth for increased corrosion resistance. features: Application: Large projects, such as bridges. - Low structural stretch. - Higher comparative breaking strain.

Specific features: - Wide cable size range. - Low -stretch. Compatible with both splicing and swaging. - Higher comparative - Good corrosion breaking resistance.strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.

Threads must be lubricated with NICKEL ANTI SEIZE 1x37 1x61 TO PREVENT GALLING

with Ultimate Structural cable

with Ultimate Structural cable

100

1x37

MBL* (kN)

1x61

Online catalogue: www.anzor.co.nz/wire-rigging Information used exclusively under permission of Strudyna Co. Ltd

18 26 47


P2H ADJUSTER

E L ABL AVAI DER R TO O approx

P2H ADJUSTER - ARCHITECTURALLY DESIGNED WIRE Tensioning system

er y D eliv onths 4M

Tension by turning the “In-Socket” only.

A “HIGH END” ARCHITECTURALLY DESIGNED FITTING • High quality tensioning unit for cable.

P2H - Fork

• Designed for performance and aesthetic appeal.

Lock Nut for In-Socket

• Threads are hidden for enhanced aesthetic appeal.

Pin

• The double locking nut system offers good security to counter external dynamic and resonance forces.

Lock Nut for Ex-socket Swage Terminal

• Due to the its unique internal adjustment system, the wire can be tensioned by turning just one end adjuster only, without turning the entire cable.

P2H Adjuster Technical Features •

For Cable diameter: 8mm – 42mm.

Made from passivated 316 Stainless Steel for enhanced corrosion resistance.

Installation - special P2H tools required.

Dynamic load bearing design with double end adjustment.

Wire: HAMMA wire - page 107 & 108.

Online catalogue: www.anzor.co.nz/wire-rigging Copyright © 2011 Strudyna

Information used exclusively under permission of Strudyna Co. Ltd

101


P2H ADJUSTER

P2H ADJUSTER - technical information P2H Adjuster

P2H Adjuster

Ø Cable

L

L1

+

L1

Cable Length

Cable Ø Adjustment (mm) (+/-)

Min Cable Length

(mm)

Cable + (L1x2) Length

836

182

1,200

(mm)

L1

Pin to Pin

Cable Ø Adjustment (mm) (+/-) 22.0

60mm

Min Cable Length

(mm)

Cable + (L1x2) Length

2,136

332

2,800

(mm)

L1

Pin to Pin

8.0

40mm

10.0

40mm

964

218

1,400

24.0

64mm

2,320

340

3,000

12.0

40mm

1,164

218

1,600

28.0

64mm

2,700

350

3,400

14.0

56mm

1,372

264

1,900

30.0

70mm

2,890

405

3,700

16.0

56mm

1,572

264

2,100

34.0

80mm

3,288

456

4,200

19.0

60mm

1,872

314

2,500

36.0

80mm

3,390

455

4,300

20.0

60mm

1,972

314

2,600

42.0

100mm

4,388

606

5,600

Figures described above are not under tension.

For installation guide and tools please contact one of our architectural product managers or visit www.anzor.co.nz/arch/p2h Loctite 243 We recommend applying Loctite 243 to the pin, washer & screw set for permanent fixture.

Maintenance & Cleaning Regular maintenance and cleaning is required to maintain appearance. See p.21 for Anzor’s Cleaning & Maintenance Guide.

Threads must be lubricated with NICKEL ANTI SEIZE TO PREVENT GALLING

P2H Precautions

102

Always select the correct cable based on the load requirement.

Do not overload the cable above its designed Safe Working Load.

Never use the P2H adjuster for lifting purposes.

Cable assembly should not be tensioned while under load and should always be used in a straight line. Separate tensioning is required with hydraulic equipment. See our website or contact us for full installation procedures.

Use nickel anti-seize to prevent the system galling.

Online catalogue: www.anzor.co.nz/wire-rigging Information used exclusively under permission of Strudyna Co. Ltd


Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages during the drawing process to ensure wire High tensile rods systems cable systems. Hamma cables are develope d exclusivel y for high does not work harden, and finished by passing through an ultrasonic tensile performances through unique techniques that differentiate from bath to remove any impuritie s that may have attache d during other manufactures. Hamma cables start with the highest quality of manufacture . This makes Hamma cable unique in raising ultimate stainless steel source follow by unique descaling of stainless steel rod corrosion resistance for extreme harsh and severe local conditions as Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages during the drawing process to ensure wire to remove impurities, which may have attached during transport, prior to well as increased work life due to the multiple annealing processes, cable systems. Hamma cables are develope d exclusivel y for high does not work harden, and finished by passing through an ultrasonic commencing production. ensuring longevity of the wire. Hamma cables are ensured of superior tensile performances through unique techniques that differentiate from bath to remove any impuritie s that may have attache d during aesthetic finish due to an excellent brightness and ultimate smooth other manufactures. Hamma cables start with the highest quality of manufacture . This makes Hammasurface cable unique in raising Types resistance : 1x19for(rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior.corrosion stainless steel source follow by unique descaling of stainless steel rod extreme harsh and severe local conditions as

P2H ADJUSTER

HAMMA PRO-STRAND

to remove impurities, which may have attached during transport, prior to commencing production.

Benefits

well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior.Types

- Built with Micro Stretch Technology (MST), the Minimum Breaking

HAMMA PRO-STRAND Strength (MBS) is 20-30% higher than conventional 1x19 wire of the

same size. This means that you can downsize the structural cable P2H ADJUSTER - cable information and maintain the strength. This results in improved aesthetics, less Benefits

High tensile rods systems

- Built with Micro Stretch Technology (MST), the Minimum Breaking

weight in the structure, and cost savings on smaller fittings, which Strength (MBS) is 20-30% higher than conventional 1x19 wire of the can besame significant largethat projects. size. Thison means you can downsize the structural cable

and maintain the strength. This results in improved aesthetics, less ØD P2H Adjuster P2H Adjuster Cable Multiple annealing stages during theTypes drawing process to ensure wire wire strand in constructions 1x7, 1x19, 1x25fittings, which : Compact weight in the structure, and cost savings on smaller

ud to offer Hamma cables as part of Strudyna's tensile Hamma cables are develope d exclusivel y for high nces through unique techniques that differentiate from ures. Hamma cables start with the highest quality of ource follow by unique descaling of stainless steel rod ities, which may have attached during transport, prior to duction.

A

does not work harden, and finished Material by passing through anStainless ultrasonic can be significant Steel on large projects. : 316 bath to remove any impuritie s that may have: attache d during Sizes 1.6mm - 12mm manufacture . This makes Hamma cable unique in raising ultimate wire strand in constructions 1x7,resistance. 1x19, 1x25 : Compact Finish Types: Bright and smooth for increased corrosion corrosion resistance for extreme harsh and severe local conditions as Steel Material : 316 Stainless well as increased work life due to the multiple annealing :processes, Sizes 1.6mm 12mm Application: Predominantly used for structural cables, e.g glass facades ensuring longevity of the wire. Hamma cablesFinish are ensured :of Bright superiorand smooth for increased corrosion resistance. High tensile rods systems aesthetic finish due to an excellent surface brightness and smooth Specific features: : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Application: Predominantly used for structural cables, e.g glass facades exterior.Types

Ø Cable

with Micro-stretch Technologies.

- Extremely non-flexible.

HAMMA PRO-STRAND 1x19

- Smooth clean finish.

Pin-to-Pin Middle adjustment

High tensile rods systems

Specific - High features: breaking strain. - No pre-stress required. - Extremely non-flexible. - Smooth clean finish. - Extremely low stretch. Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing- stages during the drawing process to ensure wire required. High breaking strain. - No pre-stress 1x7 1x19 Benefits - Built with yMicro Stretch Technology (MST), the Minimum Breaking cable systems. Hamma cables are develope d exclusivel for high does not work harden, and finished by passing through an ultrasonic - Extremely low of stretch. Strength (MBS) is 20-30% higher than conventional 1x19 wire the with Micro-stretch Technologies.

1x7

Anzor 316 Ultra Wire

techniques that differentiate fromthe drawing bath process to remove any impuritie s that may have attache d during o offer Hamma cablestensile as partperformances of Strudyna'sthrough tensile uniqueMultiple annealing during to ensure wire samestages size. This means that you can downsize the structural cable other manufactures. Hamma startnot with theharden, highestand quality of by passing manufacture . This Hamma cable unique in raising ultimate mma cables are develope d exclusivel y for high cablesdoes work finished through an makes ultrasonic and maintain the strength. This results in improved aesthetics, less stainless steel source follow by unique descaling of stainless steel rod corrosion resistance for extreme harsh and severe local conditions as s through unique techniques that differentiate from bath to remove anyin the impuritie s thatand may attache d during weight structure, costhave savings on smaller fittings, which to with remove which may attached during prior on to large well as increased work life due to the multiple annealing Produced processes, with a high level bemakes significant projects. Benefits - Enhanced corrosion resistance. . Hamma cables start theimpurities, highest quality of have manufacture . can Thistransport, Hamma cable unique in raising ultimate commencing production. ensuring longevity of the wire. cables are ensured of superior ce follow by unique descaling of stainless steel rod corrosion resistance for extreme harsh and severe local conditions as Hamma of descaling and ultrasonic removal of impurities. Benefits - Enhanced corrosion resistance. Produced with a high level 1x19 7x7 during 7x19transport, prior to aestheticannealing finish to1x25 an excellent surface brightness and smooth strand 1x7, due 1x19, : Compact Types s, which may have attached well as increased work wire life due to in theconstructions multiple processes, of (rigid), descaling andlasting ultrasonic removal of impurities. in longer shine and ultimate corrosion Types Resulting : 1x19 7x7 (semi-flexible), 7x19 (flexible) Steel Material : 316 Stainless exterior. 1x19 7x7 7x19 8.0 18 1x19 16 ction. ensuring longevity of the wire. Hamma cables are ensured of superior Resulting in longer lasting shine and ultimate corrosion40mm resistance, better for NZ’s harsh corrosive conditions. Sizes : 1.6mm - 12mm High tensile rods systems aesthetic finish due to an excellent surface brightness and smooth resistance, better for NZ’s harsh corrosive conditions. Finish Types : Bright: and smooth for increased corrosion resistance. 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) 10.0 20 1x19 20 40mm exterior. Material : e.g 316glass Stainless Application: Predominantly used for structural cables, facades Steel Material : 316 Stainless Steel 20 1x19 22 40mm Benefits - Built: with Micro-Stretch Technology (MST), the Minimum Breaking Sizes12.0 0.8mm 19mm Sizes : 0.8mm - 19mm Specific features: Strength (MBS) is 20-30% higher than conventional 1x19 wire of the :finish. 1x19 7x7 (semi-flexible), 7x19 (flexible) Types : (rigid), 1x19 (rigid), 7x7can (semi-flexible), 7x19 (flexible) non-flexible. - Types Smooth clean Strudyna is proud to offer Hamma cables as- Extremely part of Strudyna's tensile Multiple annealing stages during the drawing process to the ensure wire same size. This means that you downsize structural cable 14.0 21 1x19 24 56mm Benefits Built with Micro Stretch Technology (MST), the Minimum Breaking Finish : Bright and smooth for increased resistance. High breaking strain. No pre-stress required. Finish : Bright and by smooth for increased corrosion resistance. cable Hamma cables are develope d exclusivel y for high does not work harden, and finished passing through an corrosion ultrasonic 1x7 systems. 1x19 and maintain the strength. This results in improved aesthetics, less Strength (MBS) is 20-30% conventional 1x19 wiresofthat the may have attache d during - Extremely low stretch. tensile performances through unique techniques that differentiate from higher baththan to remove any impuritie weight in the structure, and cost savings on smaller fittings, which 16.0 24 1x19 27 56mm same size. This means that you can downsize the structural cable Application: can significant on large projects. other manufactures. Hamma cables start with the highest quality of manufacture . be This makes Hamma cable unique in foliage raisingtrellises, ultimate Balustrades, shade sails, trellises,and and Application: Balustrades, shade sails, foliage and maintain the strength. This results in improved aesthetics, less stainless steel source follow by unique descaling of stainless steel rod corrosion resistance for architectural extreme30 harsh and severe1x19 local conditions as 33 rigging. 19.0 60mm architectural rigging. weight in the structure, and cost savings on smaller fittings, which Compactwork wireRecommended strand 1x7, 1x19, 1x25 to remove impurities, which may have attachedcan during transport, prior to Types well as :increased life due intoconstructions the multiple annealing processes, for exterior in coastalareas. areas. be significant on large projects. Recommended for exterior useuse in coastal Material 316 Stainless commencing production. ensuring: longevity of theSteel wire. Hamma cables are ensured of superior Benefits - Enhanced corrosion resistance. Produced with a high level - 12mm Sizes : 1.6mm Code: aesthetic finish due1x25 to MFW...U an excellent surface brightness and smooth : Compact wire strand in constructions 1x7, 1x19, Types of descaling and ultrasonic removal of impurities. Code: MFW...U Finish : Bright and for increased corrosion resistance. 7x19 Types : smooth 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Material : 316Resulting Stainless in Steel longer lasting exterior. shine and ultimate corrosion Maintenance: Wirefor rope must cables, be cleaned & maintained regularly. - 12mmbetter for NZ’s Sizes : 1.6mm Application: Predominantly used structural e.g glass facades resistance, harsh corrosive conditions. Maintenance: Wire rope must be cleaned & maintained regularly. See our Maintenance & Cleaning guidelines on p.21. Finish : Bright and smooth for increased corrosion resistance. Specific features: See our Maintenance & Cleaning guidelines on p.21. Material : 316 Stainless Steel Application: Predominantly used for structural -cables, e.g glass facades Extremely non-flexible. Smooth clean finish. Sizes : 0.8mm - 19mm Benefits High - Built with Micro (MST), the Minimum Breaking breaking strain.Stretch-Technology No pre-stress required. 1x7features: 1x19 Types : 1x19 (rigid), 7x7 (semi-flexible),- 7x19 (flexible) Specific Strength (MBS) is 20-30% higher than conventional 1x19 wire of the - Extremely low stretch. Finish : Bright and smooth for increased corrosion resistance. Benefits Designed for large structural projects. To date this is the largest - Extremely non-flexible. - Smooth clean finish. same size. This means that you can downsize the structural cable stainless steel the market. - High breaking strain. - No pre-stress and required. 1x7 1x19 the strength. Thisstrand resultson in improved aesthetics, -maintain Designed for large structural projects. To dateless this is the largest Application: Balustrades, shade sails, Benefits foliage trellises, and - Extremely low stretch. weight in the structure, and cost savings on smaller fittings, which stainless steel strand on and the 1x61 market. architectural rigging. Types : A conventional 1x37 construction can be significant on large projects. 8.0 18 1x19 16 wire stand. 40mm Recommended for exterior use in coastal areas. Material : 316 Stainless Steel Benefits - Enhanced corrosion resistance. Produced with a high level Types : A conventional 1x37 and 1x61 construction : of Compact wire strand constructions 1x19, 1x25 Types Code: MFW...U 10.0 20 1x19 20wire stand. 40mm Sizes : and 20mm -in42mm. descaling ultrasonic removal of1x7, impurities. 1x19 7x7 7x19 Material : 316 Stainless Steel Resulting longer shine andfor ultimate corrosion Material : 316in:Stainless Steel Finish Brightlasting and smooth increased corrosion resistance. Benefits - Enhanced with a-regularly. high level Maintenance: 1.6mm 12mm Sizes Produced : resistance, Wire corrosion rope mustresistance. be cleaned & maintained better for NZ’s harsh corrosive conditions. 12.0 20 1x19 22 40mm Large structural projects, such as bridges. Sizes ofApplication: : 20mm - 42mm. of descaling ultrasonicFinish removal Bright and on smooth See ourand Maintenance & Cleaning: impurities. guidelines p.21. for increased corrosion resistance. 7x19 Resulting in longer lasting shine and ultimate corrosion Finish :Stainless Bright and smooth for increased corrosion resistance. Specific features: Material : 316 Steel 14.0Predominantly 21structural 1x25 56mm used for cables, e.g glass facades 24 resistance, better for NZ’s Application: harsh corrosive conditions. structural Application: projects, such as bridges. Sizes : 0.8mmLarge -- 19mm Low stretch. Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Specific16.0 features: Higher comparative breaking strain. 24 1x25 27 56mm Material Stainless for Steel Benefits : 316 - Designed large structural projects. To date this is thefor largest Specific Finish : features: Bright and smooth increased corrosion resistance. - Extremely non-flexible. - Smooth clean finish. - Wide cable size range. Sizes : 0.8mm - 19mm stainless steel strand on the market. - High breaking strain. - Noboth pre-stress required. - Low stretch. with splicing and swaging.33 with Ultimate Structural cable 19.0 30 1x25 60mm Types 1x7 : 1x19 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) - Compatible Application: Balustrades, shade sails, foliage trellises, and - Extremely lowcomparative stretch. - Higher Finish and smooth 1x37 for increased resistance. Types : Bright : A conventional and 1x61corrosion construction stand. -wire Good corrosion breaking resistance.strain. architectural rigging. Material : 316 Stainless Steel Wide cable size range. 1x37 1x61 Recommended for exterior use in coastal areas. Application: Balustrades, shade sails, foliage trellises, and Sizes : 20mm - 42mm. - Compatible with both splicing and swaging. with Ultimate Structural cable architectural Finish : Bright andrigging. smooth for Code: increased corrosion resistance. MFW...U Good Application: Recommended for exterior in as coastal areas. corrosion resistance. Large structural projects,use such bridges. Benefits - Enhanced corrosion with a high level Maintenance: Wire rope must beresistance. cleaned & Produced maintained regularly. 1x37 1x61 Specific features: Code: of See descaling and ultrasonic removalguidelines of impurities. MFW...U our Maintenance & Cleaning on p.21. 1x19 7x7 7x19 - Low stretch. Resulting in longer lasting shine and ultimate corrosion Maintenance: Wirecomparative rope must bebreaking cleanedstrain. & maintained regularly. - Higher resistance, better for NZ’s harsh corrosive conditions. Seecable our Maintenance - Wide size range. & Cleaning guidelines on p.21. and20.0 swaging. - Compatible with both splicing Material 316 Stainless Steelstructural 30 projects. To 1x37 33 60mm Benefits -: Designed for large date this is the largest - Good corrosion resistance.Sizes : stainless 0.8mm - 19mm steel strand on the market. Types 22.0 : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) 1x37 1x61 34 1x37 42 60mm Benefits - Designed for large structural projects.:ToBright date this the largest Finish and is smooth increased corrosion resistance. Types : A conventional 1x37for and 1x61 construction wire stand. stainless steel strand on the market. Material24.0 : 316 Stainless Steel 34 1x37 42 64mm Application:: 20mm Balustrades, shade sails, foliage trellises, and Sizes - 42mm. Types : A conventional 1x37 and 1x61 construction wire stand. architectural rigging. Finish 28.0 : Bright and smooth for40 increased corrosion resistance. 1x37 45 64mm Material : 316 Stainless Steel Recommended exterior useas inbridges. coastal areas. Application: Large structural for projects, such Sizes : 20mm - 42mm. 30.0 40 1x61 52 70mm Code: corrosion Specific features: MFW...U Finish : Bright and smooth for increased resistance. Application: Large structural projects, such as bridges. - Low stretch. Maintenance: rope must be48 cleaned & maintained regularly. - HigherWire comparative breaking strain. 34.0 1x61 56 80mm Specific features: See our & Cleaning guidelines on p.21. - Wide cable sizeMaintenance range. - Low stretch. - Compatible with both splicing 48 and swaging. 1x61 56 80mm - Higher comparative breaking strain. 36.0 - Good corrosion resistance. - Wide cable size range. 1x37 1x61 42.0 56 projects. To 1x61 60 100mm and swaging. - Compatible with both splicingBenefits - Designed for large structural date this is the largest - Good corrosion resistance. stainless steel strand on the market. 1x37 1x61 Types : A conventional 1x37 and 1x61 construction wire stand. Material : 316 Stainless Steel Sizes : 20mm - 42mm. Finish : Bright and smooth for increased corrosion resistance. Application: Large structural projects, such as bridges.

HAMMA X-STRAND

Wire Ø A Wire HAMMA X-STRAND (mm) (mm) type

ØD (mm)

Min +/-

Min Breaking Load* (kN) 47

HAMMA PRO-STRAND

74

HAMMA PRO-STRAND

106

chnologies.

145 180

Page 106 HAMMA X-STRAND

HAMMA PRO-STRAND

267

HAMMA PRO-STRAND

with Micro-stretch Technologies.

HAMMA MEGA-STRAND

HAMMA Cable Ø MEGA-STRAND A Wire

es.

(mm) (mm) HAMMA X-STRAND

type

ØD (mm)

Min +/-

Min Breaking Load* (kN) 57

HAMMA X-STRAND

90 127 170

HAMMA MEGA-STRAND

with Micro-stretch Technologies.

225

Page 107

282

HAMMA X-STRAND

HAMMA MEGA-STRAND

ctural cable

Cable Ø A (mm) (mm) HAMMA MEGA-STRAND

Wire type

ØD (mm)

Min +/-

Min Breaking Load* (kN) 279

HAMMA MEGA-STRAND

with Ultimate Structural cable

Page 108

HAMMA MEGA-STRAND

le

341 410 561 695 849 870 1,008

*Minimum Breaking Load (MBL) - after swaging minimum breaking load of cable assembly. Specific features:

Low stretch. *Refer to p.105 --for our guidelines on Safe Working Loads. Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.

with Ultimate Structural cable

1x37

1x61

Online catalogue: www.anzor.co.nz/wire-rigging www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd

103


commencing production.

ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior.Types

HAMMA PRO-STRAND Benefits

WIRE TYPES

- Built with Micro Stretch Technology (MST),High thetensile Minimum Breaking rods systems Strength (MBS) is 20-30% higher than conventional 1x19 wire of the same size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which High tensile rods systems can be significant on large projects.

Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages during the drawing process to ensure wire cable systems. Hamma cables are develope d exclusivel y for high does not work: harden, byconstructions passing through an ultrasonic Types Compactand wirefinished strand in 1x7, 1x19, 1x25 tensile performances through unique techniques that differentiate from bath to remove impuritie s that may have attache d during Stainless Steel Material : 316any Sizes : 1.6mm 12mm other manufactures. start cables with the quality of tensile manufacture This makes Hamma uniqueprocess in raising ultimate Strudyna is Hamma proud to cables offer Hamma as highest part of Strudyna's Multiple. annealing stages during cable the drawing to ensure wire Finish resistance : Brightfor and smoothharsh for increased corrosion resistance.as stainless steel follow by unique descaling of stainless steel yrod extreme severe local conditions cablesource systems. Hamma cables are develope d exclusivel for high corrosion does not work harden, and finishedand by passing through an ultrasonic to remove tensile impurities, which maythrough have attached during transport, prior to fromwell as increased workany life impuritie due to for the multiple Application: Predominantly used structural cables, e.g processes, glass performances unique techniques that differentiate bath to remove s that may annealing have attache d facades during commencing production. longevity. of themakes wire. Hamma are ensured of superior other manufactures. Hamma cables start with the highest quality ofensuring manufacture This Hamma cables cable unique in raising ultimate Specific features: finishresistance due to an surface smoothas stainless steel source follow by unique descaling of stainless steel rodaesthetic corrosion for excellent extreme harsh and brightness severe localand conditions - Extremely non-flexible. - Smooth clean finish. Types : 1x19 (rigid), 7x7 7x19 (flexible) to remove impurities, which may have attached during transport, prior toexterior. well as increased work life due to (semi-flexible), annealing processes, - High breaking strain. -the Nomultiple pre-stress required.

WIRE TYPES

with Micro-stretch Technologies.

1x7

Anzor 316 Wire

commencing production.

1x19

ensuring longevitylow of the wire. High tensile rods Hamma systems cables are ensured of superior - PRO-STRAND Extremely stretch. HAMMA aesthetic finish due to an excellent surface brightness and smooth exterior.Types

: 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)

HAMMA PRO-STRAND HAMMA X-STRAND Benefits - Built with Micro Stretch Technology (MST), the Minimum Breaking High tensile rods systems

Strength (MBS) is 20-30% higher than conventional 1x19 wire of the Benefits -process Enhanced corrosion resistance. Produced with a high level Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages during the drawing wire Benefits - Wide range to of ensure sizes and configurations. sameof size. This that you removal can downsize the structural cable descaling and ultrasonic of impurities. cable systems. Hamma cables are develope y for high does not work harden, and finished by passing through an means ultrasonic Economical pricing. 1x19 d exclusivel 7x7 7x19 Benefitsand- maintain Built withthe Micro StretchThis Technology (MST), the Minimum Breaking strength. results improved aesthetics, less Resulting indlonger lasting shine andinultimate corrosion tensile performances through unique techniques that differentiate from bath to remove any impuritie s that may have attache during Strength (MBS) is 20-30% higher than conventional 1x19 wire of the weight in structure, cost savings on smaller fittings, which resistance, better forand NZ’s harsh corrosive conditions. other manufactures. Hamma cables start with the highest quality of manufacture . This makes Hamma in the raising ultimate Material cable: unique 316 Stainless Steel. same size. This means that you can downsize the structural cable can be significant on large stainless steel source follow by unique descaling of stainless steel rod corrosion resistance for extreme severe local conditions as projects. and maintain the strength. This results in improved aesthetics, less : 1mm - 10mm. Size harsh and Material : 316 Stainless Steel the drawing process to ensure wire Strudyna is proud to during offer Hamma Strudyna's stages during to remove impurities, which may have attached transport,cables prior to as part wellof as increased tensile work life Types due Multiple to the multiple annealing processes, weight in the structure, and cost savings on smaller fittings, which :annealing 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible). Sizes : 0.8mm 19mm : Compact Types wire strand in 1x19, an 1x25 exclusivel y forofhigh does not work harden, and finished by projects. passing1x7, through ultrasonic can be significant onconstructions large commencing production.cable systems. Hamma cables are develope d ensuring longevity the wire. Hamma cables are ensured of superior Types : 316: Stainless 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Material Steel High tensile systems finish due from to an excellent surface brightness and smooth tensile performances through unique techniquesaesthetic that differentiate bath to remove any impuritie that may corrosion have attache d rods during Application: Balustrades, shade sails, s foliage trellises, Finish : Bright and smooth for increased resistance. Sizes : 1.6mm 12mm Compact wire strand in constructions 1x7, 1x19, 1x25 Types : 1x19 (rigid), Types 7x7 (semi-flexible), 7x19 (flexible) and rigging. other manufactures. Hamma cables start with exterior. the highest quality of manufacture .: architectural This makes Hamma cable unique in raising ultimate FinishMaterial : Bright and smoothSteel for increased corrosion resistance. 316 Stainless : Application: Balustrades, shade sails, trellises, andconditions as stainless steel source follow by unique descaling of stainless steel rod corrosion resistance extreme harshfoliage and severe local : 1.6mm for - 12mm Code: Sizes Predominantly MFW... architectural rigging. used forfor structural cables, e.g resistance. glassprocesses, facades to remove impurities, which may have attached during transport, prior to Application: well as increased work due to the multiple annealing Finish : Bright and life smooth increased corrosion Recommended for exterior use inwith coastal areas. Material Test Certs available on request order. commencingStrudyna production. ensuring longevity of the wire. Hamma cables are ensured of superior is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages during the drawing process to ensure wire Specific features:(MST), Application: Predominantly used Breaking for structural cables, e.g glass facades with Micro-stretch Technologies. Benefits - Built with yMicro Stretch Technology the Code: MFW...U cable systems. Hamma cables are develope d exclusivel for high does not work harden, and finished by passing through ultrasonic aesthetic finish due to Minimum an excellent surface brightness smooth Maintenance: Wire rope must be cleaned & maintained regularly. Extremely non-flexible. -wire Smooth clean finish.anand Strength (MBS) is 20-30%-higher than conventional 1x19 of the Types :strain. 1x19impuritie (rigid), (semi-flexible), 7x19d(flexible) tensile performances through unique techniques that differentiate from exterior. to remove any that may have during Specific features: -bath High breaking -s7x7 No pre-stress required. See ourWire Maintenance & Cleaning guidelines onattache p.21. Maintenance: rope must be cleaned & maintained regularly. 1x7 1x19 same size. This means that you can downsize the structural cable - Extremely non-flexible. Smooth clean other manufactures. Hamma cables start with the highest quality of manufacture . low Thisstretch. makes Hamma -cable unique in finish. raising ultimate Extremely and maintain the strength.- This results in improved aesthetics,&less See our strain. Maintenance Cleaning guidelines on p.21. - High breaking - No pre-stress required. stainless steel source follow by unique1x7 descaling of stainless steel rod corrosion resistance for extreme harsh and severe local conditions as 1x19weight in the structure, and cost savings on smaller fittings, which - Extremely to remove impurities, which may have attached during prior on to largewell as increased low workstretch. life due to the multiple annealing processes, can transport, be significant projects. commencing production. ensuring longevity of the wire. Hamma cables are ensured of superior -finish Designed for large structural projects. To date this is the largest Benefits - Built withdue Micro Stretch Technology (MST), the Minimum Breaking aesthetic to an excellent surface brightness and smooth Types inBenefits constructions 1x7, 1x19, 1x25 : Compact wire strand Types : steel 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) stainless on the market. Material : 316 Stainless Steel Strength (MBS) isstrand 20-30% higher than conventional 1x19 wire of the Benefits exterior. - Enhanced corrosion resistance. Produced with a high level Sizes : 1.6mm - 12mm same size. This means thatremoval you can the structural cable descaling and ultrasonic ofdownsize impurities. Benefits -: Enhanced corrosion Produced with a high level High tensile rods systems Types ofcorrosion A conventional 1x37resistance. and 1x61 construction wire stand. 1x19 7x7 7x19 Finish : Bright and smooth for increased resistance. and of maintain the strength. This results improved aesthetics, less in longer lasting shine and ultimate corrosion descaling and ultrasonic removal of in impurities. MaterialResulting : 316 Stainless Steel 1x19 7x7 7x19 weight ine.g the structure, and cost savings on smaller fittings, which in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions. Application: Predominantly used forSizes structural cables, glass facades : Resulting 20mm - 42mm. be significant onfor large projects. resistance, better NZ’s harsh corrosive conditions. High tensile rods systems Benefits - : Built with Micro Stretch Technology (MST), the Minimum Breaking Finish can Bright and smooth for increased corrosion resistance. Specific features: Material : 316 Stainless Steel isprojects, Strength (MBS) 20-30% higher conventional 1x19 wire of the Application: Large structural such asthan bridges. - Extremely non-flexible. Smooth clean finish. Material : 316 Stainless Steel Compact wire strand in that constructions 1x7, 1x19, 1x25 Types same size. This means you can downsize the structural cable Sizes : : 0.8mm - 19mm Strudyna is proud tensilestrain. Multiple stages during the drawing process to ensureaesthetics, wire Specific features: - High breaking - Noannealing pre-stress required. Sizes : and 0.8mm -7x7 19mm 1x7 to offer 1x19 Hamma cables as part of Strudyna's maintain the strength. This results in improved less Material 316 Stainless Steel Types : : 1x19 (rigid), (semi-flexible), 7x19 (flexible) - Low stretch. - Extremely :harden, 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) cable systems. Hamma cables are develope d exclusivel y for low highstretch. doesTypes not work and byand passing through an ultrasonic weight in thefinished structure, cost savings on smaller fittings, which Finish : : Bright and smooth for increased corrosion resistance. 1.6mm 12mm Sizes - Higher comparative breaking strain. Finish : Bright and smooth for increased corrosion resistance. can be significant onthat large projects. tensile performances that as differentiate from tensile bath toMultiple remove any impuritie sfor have attache d during Strudynathrough is proudunique to offertechniques Hamma cables part of Strudyna's annealing stages during the may drawing process to ensure wire Finish : -Bright and smooth increased corrosion resistance. Wide cable size range. cable systems. cableswith are the develope d exclusivel y for high does Balustrades, workmakes harden, and finished byand passing through ultrasonic other manufactures. Hamma Hamma cables start highest quality of manufacture This Hamma cable unique in raising Application: shade sails, foliage trellises, and an ultimate Compatible with both splicing swaging. -.not Application: Balustrades, shade sails, foliage trellises, and Types Compact wire strand in constructions 1x7, 1x19, 1x25 : Application: Predominantly used fors structural e.g glass facades through unique techniques thatsteel differentiate from bath to remove any impuritie that severe may cables, have d during architectural rigging. stainless steel tensile sourceperformances follow by unique descaling of stainless rod corrosion resistance for extreme harsh and localattache conditions as corrosion architectural rigging. Stainless resistance. Steel Material - Good : 316 other manufactures. Hamma cables start transport, with highest quality well of resistance. .work This makes Hamma cable inareas. raising ultimate Recommended for in unique coastal to remove impurities, which may have attached during prior to as manufacture increased dueexterior to exterior the use multiple processes, 1x37 1x61 Benefits - the Enhanced corrosion Produced with a high level Recommended for use inannealing coastal areas. Sizes : 1.6mm - life 12mm Specific features: with Micro-stretch Technologies. stainless steel source follow by unique descaling of of descaling stainless steel rod corrosion resistance for extreme harsh and are severe local conditions as and ultrasonic removal of of impurities. commencing production. ensuring longevity the Hamma ensured of superior Finish : Bright andwire. smooth for increased corrosion resistance. 1x19 7x7 7x19 -well Extremely non-flexible. - cables Smooth clean finish. Code: MFW...U Code: MFW...U to remove impurities, which may have attached during transport, prior tolasting as increased work life due to the multiple annealing processes, Resulting in longer shine and ultimate corrosion aesthetic finish due to an excellent -surface brightness and smooth -ensuring High breaking strain. Nocables pre-stress required. 1x7 1x19 Application: Predominantly usedHamma for structural cables, e.g glass facades commencing production. longevity of the wire. are ensured of superior resistance, better for NZ’s harsh corrosive conditions. Types :rope 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Maintenance: Maintenance: Wire Wire must be cleaned & maintained regularly. rope must be cleaned & maintained regularly. exterior. -aesthetic Extremely finishlow duestretch. to an excellent surface brightness and smooth SeeMaintenance our Maintenance & Cleaning guidelines p.21. Specific features: See our & 7x7 Cleaning guidelines onon p.21. : 1x19 (rigid), (semi-flexible), 7x19 (flexible) Material : 316 Stainless Steel exterior.Types - Extremely non-flexible. - Smooth clean finish. Sizes : 0.8mm - 19mm High (flexible) breaking strain. - No pre-stress required. 1x7 1x19 Types : 1x19 (rigid), 7x7 (semi-flexible),- 7x19 - Extremely stretch. Finish : Bright and smooth for increased corrosion low resistance. Benefits -with Designed for large structural projects. date this thelargest largest Benefits - -Built Micro Stretch Technology (MST), the Minimum Breaking Benefits Designed for large structural projects. To To date this is is the stainless steel strand on the market. Benefits Strength - Enhanced corrosion resistance. Produced with a high steel strand on the market. (MBS) is 20-30% higher than conventional 1x19level wire of the Benefits - Built with Stretch Technology (MST), the Minimum Breaking Application: Balustrades, shade sails, foliagestainless trellises, and Micro of descaling and ultrasonic removal ofconventional impurities. Strength is that 20-30% higher than 1x19 wire of the This(MBS) means you can downsize the structural cable architectural rigging. Types same: size. 1x19 7x7 7x19 A conventional 1x37 and shine 1x61 construction wire stand. Micro-stretch Micro-stretch Micro-stretchTechnologies Technologies Technologies Resulting in longer lasting and ultimate corrosion same areas. size. This means that you can downsize the structural cable Types :and A 1x37 and 1x61 construction wire stand. Recommended for exterior use in conventional coastal maintain the strength. This results in improved aesthetics, less Material : Enhanced 316 Stainless Steel Benefits corrosion resistance. Produced with a high level resistance, better for NZ’s harsh corrosive conditions. 1x7 1x19 1x25 and maintain the strength. This results on in improved aesthetics, less Material 316: Stainless Steel in the and cost savings smaller fittings, which Sizes :weight 20mm -structure, 42mm. Code: MFW...U of descaling and ultrasonic removal of impurities. 8.0 8.0 8.0 9.0 9.0 9.0 10.0 10.0 10.0 11.0 11.0 11.0 16.0 16.07x7 19.0 19.0 19.0 12.0 12.0 12.0 14.0 14.0 14.0 1x1916.0 weight in the structure, and cost savings on smaller fittings, which Sizes Finish :can 20mm - 42mm. 7x19 be significant on large : Resulting Bright and smooth forprojects. increased corrosion resistance. inSteel longeron lasting shine and ultimate corrosion can be significant large projects. Material : 316 Stainless :&Bright and structural smooth for increased resistance. Application: Large suchcorrosion as bridges. 5/16” 5/16” 5/16” 3/8” 3/8” 3/8” 7/16” 7/16” 7/16” Maintenance: Wire rope mustFinish be cleaned maintained regularly. resistance, better projects, for NZ’s harsh corrosive conditions. Sizes & Cleaning : Large 0.8mm - 19mm Application: structural such as bridges. : Compact wire strand in constructions 1x7,1x7, 1x19, 1x25 Types See our Maintenance onprojects, p.21. Types Compact wire strand in constructions 1x19, 1x25 : guidelines Specific: features: 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x25 1x25 1x25 1x25 1x25 1x19 1x19 1x19 1x25 1x25 1x25 1x25 Types 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Material : 316 Stainless SteelSteel Material :: 316 Stainless 316 Stainless Steel Material - Low stretch. Specific features: Finish : Bright and smooth for increased corrosion resistance. 36.19 36.19 36.19 46.48 46.48 46.48 57.49 57.49 57.49 71.20 71.20 71.20 84.73 150.63 150.63 188.29 188.29 188.29 84.73 84.73 113.586 113.586 113.586 150.63 1.6mm - 12mm Sizes Sizes :: 0.8mm - 19mm Sizes 1.6mm 12mm breaking strain. - stretch. Higher comparative - :Low :: comparative 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Finish Types Bright and smooth for increased resistance. Finish Bright and smooth for increased corrosion resistance. - Wide cable size range. - :Higher breaking strain.corrosion 6,500 6,500 6,500 9,000 9,000 9,000 10,250 10,250 10,250 13,500 13,500 13,500 14,400 25,600 25,600 32,000 32,000 32,000 14,400 14,400 19,300 19,300 19,300 25,600 Benefits - Designed for large structural To date this is the largest Application: Balustrades, shade foliage trellises, Finish projects. : Bright and smooth for increased corrosion and resistance. Compatible with bothsails, splicing and swaging. Wide cable size range. stainless steel strand on the market. Application: Predominantly used for structural cables, glassfacades facades Application: Predominantly used for structural cables, e.ge.g glass architectural rigging. 63.74 63.74 63.74 88.26 88.26 88.26 100.52 100.52 100.52 132.39 132.39 132.39 141.22 251.05 251.05 313.81 313.81 313.81 141.22 141.22 189.27 189.27 189.27 251.05 Good corrosion resistance. - Compatible with both splicing and swaging. with Ultimate Structural cable Application: Balustrades, shade sails, foliage Recommended for exterior use intrellises, coastaland areas. 1x37 1x61 Specific features: Types : A conventionalSpecific 1x37 and 1x61 construction wire stand. DIN DIN18800 18800 18800 *Z *Z *Z - Good corrosion resistance. features: R,D R,D R,DDIN with Micro-stretch Technologies. architectural rigging. - Extremely non-flexible.- Smooth - Smooth clean finish. Material : 316 Stainless Steel 1x37 1x61 non-flexible. finish. Code:- Extremely Recommended for exterior use clean in coastal areas. MFW...U - High breaking strain. No pre-stress required. Sizes : 20mm - 42mm. 1x7 1x19 - High breaking strain. - No- pre-stress required. 1x7 1x19 - Extremely low stretch. Finish : Bright and smooth for Code: increased corrosion resistance. MFW...U Maintenance: Wire rope must be cleaned & maintained regularly. - Extremely low stretch. Application: Large structural projects, such as bridges. Extreme Extreme ExtremeCondition Condition ConditionGear Gear Gear our rope Maintenance & Cleaning guidelines on p.21. Maintenance:SeeWire must be cleaned & maintained regularly. Specific features: See our Maintenance & Cleaning guidelines on p.21. 4.8 4.8 4.8 555 2.5 2.5 2.5 333 3.2 3.2 3.2 3.5 3.5 3.5 444 4.5 4.5 4.5 - Low stretch. - Higher comparative breaking strain. 3/16” 3/16” 3/16” 1/8” 1/8” 1/8” 5/32” 5/32” 5/32” Benefits - Enhanced corrosion resistance. Produced with a high level - Wide cable size range. Benefits - Enhanced - Designed for large structuralremoval projects. date thislevel is the largest of descaling andresistance. ultrasonic of To impurities. Benefits corrosion Produced with a high 7x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x191x19 1x19 1x19 1x197x7 1x19 and swaging. - Compatible with both splicing Benefits Designed for large structural projects. To date this is the largest steel strand on removal theshine market. Resulting in ultrasonic longer lasting and ultimate corrosion of stainless descaling and of impurities. - Good corrosion resistance. 1x19 7x7 7x19 stainless steel strand on the market. resistance, better for NZ’s harsh 12.39 12.39 3.09 3.09 3.09 4.45 4.45 4.45 5.06 5.06 5.06 6.06 6.06 6.06 7.88 7.88 7.88 10.01 10.01 10.01 11.39 11.39 11.39 12.39 Resulting in longer lasting shine andcorrosive ultimateconditions. corrosion 1x37 1x61 Types : A conventional 1x37 and 1x61corrosive construction wire stand. resistance, better for NZ’s harsh conditions. 756 756 756 861 861 861 1,030 1,030 1,030 1,340 1,340 1,340 1,702 1,702 1,702 1,935 1,935 1,935 2,100 2,100 2,100 525 525 525 Types :: A conventional 1x37 and 1x61 construction wire stand. Material 316 Stainless Steel Material : 316 Stainless Steel Material :: 316 Stainless Steel Sizes 0.8mm 19mm 7.41 7.41 7.41 8.44 8.44 8.44 10.1 10.1 10.1 13.14 13.14 13.14 16.69 16.69 16.69 18.98 18.98 18.98 20.59 20.59 20.59 5.15 5.15 5.15 SizesSizes: 316 : 20mm - 42mm. Material Stainless Steel :: 20mm - 42mm. Types 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Finish : Bright and smooth for increased corrosion corrosion resistance. Sizes : 0.8mm - 19mm Finish :: Bright and Finish Bright and smooth smooth for for increased increased corrosion resistance. resistance. Application: Large structural projects, as bridges. bridges. Application: Large structural projects,such such Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)

HAMMA PRO-STRAND

Page 105

with Micro-stretch Technologies.

Anzor 316 Ultra Wire

HAMMA PRO-STRAND

HAMMA MEGA-STRAND

HAMMA X-STRAND

HAMMA X-STRAND HAMMA PRO-STRAND

with Micro-stretch Technologies.

HAMMA X-STRAND

with Ultimate Structural cable

Page 106

with Micro-stretch Technologies.

HAMMA PRO-STRAND

HAMMA PRO-STRAND HAMMA HAMMA PRO-STRAND MEGA-STRAND HAMMA HAMMA MEGA-STRAND X-STRAND HAMMA X-STRAND

HAMMA MEGA-STRAND

with Ultimate Structural cable

Page 107

with Micro-stretch Technologies.

HAMMA MEGA-STRAND

HAMMA X-STRAND HAMMA MEGA-STRAND HAMMA X-STRAND

HAMMA MEGA-STRAND

with Ultimate Structural cable

10 10 10

11.1 11.1 11.1

12 12 12

7/16” 7/16” 7/16” 1x19 1x19 1x19

1x19 1x19 1x19

12.7 12.7 12.7

14 14 14

1/2” 1/2” 1/2” 1x19 1x19 1x19

1x19 1x19 1x19

1x19 1x19 1x19

14.3 14.3 14.3

16 16 16

9/16” 9/16” 9/16”

5/8” 5/8” 5/8”

19 19 19

1x19 1x19 1x19

1x19 1x19 1x19

1x19 1x19 1x19

with Ultimate Structural cable

Page 108

with Ultimate Structural cable

8,400 8,400 8,400 10,574 10,574 10,574 12,102 12,102 12,102 13,555 13,555 13,555 16,473 16,473 16,473 17,186 17,186 17,186 20,500 20,500 20,500 30,300 30,300 30,300

82.38 82.38 82.38

103.7 103.7 103.7 118.68 118.68 118.68 132.93 132.93 132.93 161.54 161.54 161.54 168.54 168.54 168.54 201.04 201.04 201.04 297.14 297.14 297.14

104 30 30 30

1x37

1x37

1x61

1x61

Finish Specific : Bright and smoothshade for increased corrosion Application: Balustrades, sails, foliage trellises,resistance. and features: Specific features: architectural rigging. - Low stretch. - Low stretch. Recommended for exterior use in coastal areas. Application: Balustrades, shade sails, foliage trellises, and - Higher comparative breakingstrain. strain. - Higher comparative breaking architectural - Wide cable rigging. size range. Code: MFW...U - Wide cable size range. splicing swaging.areas. - Compatible with Recommended forboth exterior useand in coastal with both splicing and swaging. - Compatible - Good corrosion Maintenance: Wire roperesistance. must be cleaned & maintained regularly. - Good corrosion resistance. Code: MFW...U

See our Maintenance & Cleaning guidelines on p.21.

Maintenance:

Wire rope must be cleaned & maintained regularly. HAMMA MEGA-STRAND See our Maintenance & Cleaning guidelines on p.21. Benefits

Ultimate Ultimate UltimateStructural Structural Structuralcable cable cable 34 34 34

36 36 36

- Designed for large structural projects. To date this is the largest

stainless steel strand on the market. HAMMA MEGA-STRAND

42 42 42

Types : A conventional 1x37 and 1x61 construction stand. - Designed for large structural projects. To date wire this is the largest Online catalogue:Benefits www.anzor.co.nz/wire Material : 316steel Stainless Steel stainless strand on the market. Sizes

: 20mm - 42mm.


x7

- Extremely non-flexible.

tensile 1x7 1x19performances

7x19

- Smooth clean finish.

Benefits - Built with Micro the Minimum through - unique techniques that fromStretch Technology bath to(MST), remove any Breaking impuri High breaking strain. - Nodifferentiate pre-stress required. Strength (MBS) is 20-30% higher than conventional 1x19 wire of th Extremely low stretch. other manufactures. Hamma cables start with the highest . This makes Ha samequality size. Thisof means thatmanufacture you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less stainless steel source follow by unique descaling of stainless steel rod corrosion resistance for extrem weight in the structure, and cost savings on smaller fittings, which to remove impurities, which may have attached during transport, prior to on largewell as increased work life du can be significant projects. HAMMA X-STRAND commencing production.Benefits - Enhanced corrosion Types ensuring longevity of the wire. resistance. Produced with a high level wire strand in constructions 1x7, 1x19, 1x25 : Compact of descaling and ultrasonic removal of impurities. Material : 316 Stainless Steel aesthetic finish due to an ex Resulting in longer lasting ultimate corrosion ANZOR 316 WIRE: ROPE Sizes shine: and 1.6mm - 12mm 1x19 (rig resistance, better for NZ’s harsh corrosive conditions. exterior.Types : Bright and smooth for increased corrosion resistance.

Finish

with Micro-stretch Technologies.

316 Stainless Steel Application: Predominantly used for structural cables, e.g glass facades 0.8mm - 19mm Specific features: 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) - Extremely non-flexible. - Smooth clean finish. Bright and smooth for increased corrosion resistance. - High breaking strain. - No pre-stress required. - Built with Micro Str - Extremely Balustrades, shade sails, foliage trellises,low andstretch. Benefits architectural rigging. Strength (MBS) is 2 Recommended for exterior use in coastal areas.

Code:

MFW...U

Anzor 316 Wire

1x19

7x7

Maintenance:

7x19

HAMMA PRO-STRA

Material : Sizes : Types : Finish : 1x7 1x19 Application:

same size. This mea maintain the st Benefits - Enhanced corrosion resistance. Produced with a high level weight in the struct Wire rope must be cleaned & maintained regularly. of descaling and ultrasonic removal of impurities. Material & Cleaning : 316Resulting Stainless See our Maintenance guidelines on p.21. can be significant o in Steel. longer lasting shine and ultimate corrosion Benefits - Wide range of sizes and configurations. HAMMA X-STRAND and - Economical pricing.

: 1mm - 10mm. resistance, better for NZ’s harsh corrosive conditions.

Size

HAMMA MEGA-STRAND : Types

1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible).

: Compact wire stran Material : 316 Stainless Steel Types - Designed for large structural projects. To date this is the largest Sizes : 0.8mm - 19mm Material : 316 Stainless Steel stainless steelApplication: strand on the market. Balustrades, sails, foliage7x19 trellises, Types : 1x19 (rigid),shade 7x7 (semi-flexible), (flexible) Sizes : 1.6mm - 12mm Finish : Bright and smooth for increased corrosion resistance. and architectural rigging. Types : A conventional 1x37 and 1x61 construction wire stand. Finish : Bright and smooth Material : K 316 Stainless Steel EX-STOC Application: Balustrades, shade sails, foliage trellises, and T EC Code: MFW... Sizes SUBJ : 20mm - 42mm. architectural rigging.Application: Predominantly used PR IOR FinishTO LE : Bright and smooth for increased corrosion resistance. Material Test Certs on in request order. SA Recommended foravailable exterior use coastalwith areas. Application: Large structural projects, such as bridges.

Benefits

Anzor 316 - Wire with Micro-stretch Technologies.

te Structural cable

Wire Rope 1x37

Size

1x61

2.0 mm 2.5 mm 3.0 mm 4.0 mm 5.0 mm 6.07x19 mm 8.0 mm

1x19

1x19

7x7

1x19

7x7

7x7

7x19

Load

340 kg 500 kg 720 kg 1,285 kg 2,000kg 2,876 kg 4,640 kg

1.0 mm 1.5 mm 2.0 mm 2.5 mm

60 kg 122 kg 235 kg 1x37 428 1x61 kg

2.0 mm 2.5 mm 3.0 mm 4.0 mm 5.0 mm 6.0 mm 8.0 mm 10.0 mm

230 kg 380 kg 540 kg 950 kg 1,490 kg 1,910 kg 3,400 kg 5,310 kg

with Ultimate Structural cable

1x19

Code: Specific features: MFW...U Specific features: Maintenance: Wire rope must be cleaned & maintained regularly. - Low stretch. Extremely Maintenance: See our Cleaning guidelines onnon-flexible. p.21. WireMaintenance rope must be & cleaned & maintained regularly. - Higher comparative breaking strain. High breaking See our Maintenance & Cleaning guidelines on p.21. strain. 1x19 - Wide cable1x7 size range. - Extremely low stretch. - Compatible with both splicing and swaging. Breaking - Good corrosion resistance. Characteristics

7x19

HAMMA MEGA-STRAND Benefits

- Designed for large structural projects. To date this is the largest stainless steel strand on the market.

HAMMA X-STRAND

- Rigid,Types non-flexible, stretch - ideal straight lines. : Alow conventional 1x37 in and 1x61 construction wire stand. - HigherMaterial comparative breaking : 316 Stainlessstrain. Steel

Benefits

- Enhanced corrosion and ult Resulting in longer resistance, better fo Cleaning &

: 20mm - FewerSizes crevices, traps less- 42mm. dirt, therefore less likely to `tea-stain’.

Finish : Bright and smooth for increased corrosion of resistance. descaling - Commonly used with swage fittings. Application: Large structural projects, such as bridges.

Specific features: - Low stretch. Maintenan ce - Higher comparative breaking strain. - Semi-flexible. is require d. - Wide cable size range. Material : 316 Stainless Steel - Low-medium-stretch. Compatible with both splicing and swaging. S e e p .2 1 Sizes : 0.8mm - 19mm - Good corrosion resistance. - Medium breaking strain.

Types Finish

: 1x19 (rigid), 7x7 (se : Bright and smooth

- Can be terminated with crimps, or can also be swaged.

- Very flexible. - Medium stretch. - Medium-low breaking strain.

Application: Balustrades, shade architectural rigging Recommended for

- Can be terminated with crimps, or can also be swaged.

Code: - More crevices so higher risk of to tea-staining. - Hardest to clean.

Maintenance:

MFW...U

Wire rope must b

Safe Working Load - to determine the safe working load of a wire rope or cable, the nominal strength orSee our Maintena Minimum Breaking Load (MBL) must be reduced by a safety factor. The MBL of a wire rope should be considered the straight line pull which will actually break the wire. The nominal strength or MBL of a wire rope should never be used as its working load.

HAMMA MEGA-STR Benefits

- Designed for large

Material

: 316 Stainless Steel

The safety factor is the ratio of strength of the rope or strand to the working load required. It is impossible to stainless steel stran establish a uniform safety factor as it will depend upon the type of work performed, government regulations, loads applied, speed of operation, length of wire rope used, etc. As a guideline, designers/installers commonly use a the Safe Working Load of 25% of Breaking Load, allowing for a 4:1 safety factor.Types : A conventional 1x3

It is the customer’s responsibility to ensure that an appropriate safety factor has been applied to the MBL to Sizes : 20mm - 42mm. calculate the safe working load of the wire rope being specified or ordered. We suggest that you engage Finish Bright and smooth a consulting engineer to assist you. Anzor takes no responsibility for the final decision, and accepts: no Application: Large structural pro liability in the case where loss arises from the safety factor chosen.

Online catalogue: www.anzor.co.nz/arch

105

Specific features: - Low stretch. - Higher comparative bre


to an excellent surface brightness and smooth Breakin Benefits aesthetic - Builtfinish withdue Micro Stretch Technology (MST), the Minimum Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior. Strength (MBS) is 20-30% higher than conventional 1x19 wire of samePRO-STRAND size. This means that you can downsize the structural cable HAMMA and maintain the strength. This results in improved aesthetics, le Strudyna is proud to offer Hamma assmaller part of Strudyna in the andtensile cost cables savings on whi Hamma cablesweight as part of structure, Strudyna's Multiple fittings, annealing Benefits Built with Micro Stretch Technology (MST), the Minimum Breakingy can be significant on large projects. cable systems. Hamma cables are develope d exclusivel

Strudyna is proud to offer cable systems. Hamma cables are develope d exclusivel y forhigher high does not Strength (MBS) is 20-30% than conventional 1x19 work wire of ha the tensile performances through unique techniques that differen same size. This means that you can downsize the structural cable : Compact that wire strand in constructions Types tensile performances through unique techniques differentiate from 1x7, 1x19, bath 1x25 to remove and maintain the strength. This results in improved aesthetics, less other manufactures. Hamma cables start with the highest ANZOR 316 ULTRA WIRE : 316 Stainless Steel other ROPE manufactures. Hamma Material cables start with the highest . This weight in the structure,quality and cost of savings onmanufacture smaller fittings, which 12mm Sizes : 1.6mm stainless steel source follow byprojects. unique descaling of stainless can -be significant on large stainless steel source follow by unique descaling stainless steel rod Finish : Bright andof smooth for increased corrosion corrosion resistance. resistan toTypes remove: impurities, which may have attached during transpo Compact wire strand in constructions 1x7, 1x19, to remove impurities, which may have attached during transport, prior to well1x25 as increased Application: Predominantly used for structural cables, e.g glass facades Stainless Steel Material : 316production. commencing commencing production. ensuring longevity Sizes : 1.6mm - 12mm Specific Strudyna is features: proud: to offer part of Strudyna's tensi Finish Bright and Hamma smooth forcables increasedas corrosion resistance. aesthetic finish d - Extremely non-flexible. - Smooth clean finish. Types cable systems. Hamma cables are develope d exclusivel y for hig Application: Predominantly used for structural cables, e.g glass facades exterior. Anzor 3161x7Ultra Wire - High breaking strain. - No pre-stress required. 1x19 tensile performances through unique techniques that differentiate fro - Extremely Specific features:low stretch. Higher corrosion resistance than standard 316 wire, due to the wire - Extremely non-flexible. - Smooth clean finish. other manufactures. Hamma cables start with the highest quality - High breaking strain. - No pre-stress required. 1x7 1x19 undergoing additional treatments. stainless steel -source follow by unique descaling of stainless steel ro Extremely low stretch. HAMMA X-STRAND to remove impurities, which may have attached during transport, prior Benefits - Built wi Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple Benefits - Enhanced corrosion resistance. Produced withannealing a high level stages commencing production. Strengt HAMMA X-STRAND of descaling and ultrasonic removal of impurities. cable systems. Hamma cables are develope d exclusivel y for high does not work harden, a 1x19 7x7 7x19 Resulting in longer lasting shine and ultimate corrosion Benefits that - Enhanced corrosionfrom resistance. Produced high level same tensile performances through unique techniques differentiate bath with to aremove any si im resistance, better NZ’s harsh corrosive conditions. and ma of descaling andfor ultrasonic removal of impurities. 1x19 7x7 7x19 other manufactures. Hamma cables start with the Resulting highestin longer quality of shine and manufacture . This make lasting ultimate corrosion weight better for rod NZ’s harsh corrosive conditions. Material : 316 Stainless stainless steel source follow by unique descaling of resistance, stainlessSteel steel corrosion resistance for e can be : 0.8mm - 19mm to remove impurities, which may have Sizes attached during transport, prior to well as increased work l : 316 Stainless TypesMaterial : 1x19 (rigid), 7x7 Steel (semi-flexible), 7x19 (flexible) Sizes : 0.8mm - 19mm commencing production. ensuring longevity of the Finish : Bright and smooth for increased corrosion resistance. Types : Compa Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) aesthetic finish : due Finish : Bright and smooth for increased corrosion resistance. 316 to Staa Material Application: Balustrades, shade sails, foliage trellises, and Types : 1x1 exterior. Sizes : 1.6mm architectural rigging. Application: Balustrades, shade sails, foliage trellises, and Finish : Bright a architectural rigging. Recommended for exterior use in coastal areas. with Micro-stretch Technologies.

HAMMA PRO

with Micro-stretch Technologies.

Anzor 316 - Ultra Wire

MFW...U

Code:

MFW...U

Maintenance:

with Micro-stretch Technologies.

with Ultimate Structural cable

with Ultimate Structural cable

Cleaning & Maintenance is require d.

See p.21

Wire Rope

Size

0.8 mm 1.0 mm 1.5 mm 2.0 mm 2.5 mm mm 1x19 7x73.0 7x19 3.5 mm refer to p92 for 4.0 mm characteristics 4.5 mm 5.0 mm 6.0 mm 7.0 mm 1x61 with Micro-stretch Technologies. 1x37 7x7 8.0 mm 1x37 1x6110.0 mm 12.0 mm 14.0 mm 16.0 mm 19.0 mm

1x19

7x7

0.8 mm 1.0 mm 1.5 mm 2.0 mm 2.5 mm 3.0 mm 7x19 3.5 mm 4.0 mm 4.5 mm

Application: Predom

Wire rope must be cleaned & maintained regularly.

with Micro-stretch Maintenance: WireTechnologies. rope must be cleaned & maintained regularly. Specific features: Benefits - on Built with Micr SeeSee ourour Maintenance guidelines on p.21. Maintenance&&Cleaning Cleaning guidelines p.21.

- Extremely Strength (MBSn 1x19 High break same size. This -is is Extremely l and maintain Benefits Designed for large structural projects. To date this the largest Benefits - Designed for large structural projects. To date this the largest t *Breaking Size *Breaking stainless steel strand on the market. Wire Rope weight in the s stainless steel strand on the market. Load (Kg) Load (Kg) be signific Types : A conventional 1x37 wirecan stand. 53 5.0 and mm1x61 construction 1,620

HAMMA MEGA-STRAND HAMMA 1x7 MEGA-STRAND 1x19

HIGHLIGHTED SIZES IN STOC K. OTHE RS AVAILABLE ON REQUEST.

HAMMA PRO-ST

Recommended for exterior use in coastal areas.

Code:

Types

1x7

HAMMA X-S

: A conventional 1x37 and 1x61 construction wire stand.

Material : 316 Stainless Steel 84 6.0 mm 2,320 Material Stainless Steel Sizes : 316 : 20mm - 42mm. 189 7.0 mm Types 3,160 : Compact wire Sizes Finish : 20mm - 42mm. : Bright and smooth formm increased 3,670 corrosion resistance. with Micro-stretch Technologies. 336 8.0 Benefits - EnhancS Application: Material : 316 Stainless Large structural projects, such as bridges. Finish : Bright and smooth for increased corrosion resistance. 525 10.0 mm 5,750 Application: Large structural projects, such as bridges. of desc 1x19 7x7 7x19 756 12.0 mm 8,270 Sizes : 1.6mm - 12mm Specific features: 1x19 1,030 14.0 mm 1x7 11,200 - Low stretch. Resultin Finish : Bright and sm Specific features: 1,340 16.0 mmstrain.14,700 - Higher comparative breaking resistan Low stretch. 1,702 18.0 mm 21,000 - Wide cable size range. Application: Predominantly - Higher comparative breaking strain. 2,100 with both splicing and swaging. - Compatible - Wide cable size range. - Good corrosion resistance. 3,030 1.0 mm 59 Material : 316 Sta swaging. - Compatible with both splicing Specific 4,120 1.5 mm and 134 features: Sizes : 0.8mm 5,380 - Good corrosion resistance. 239 - Extremely 2.0 mm non-fle 8,400 2.5 mm 373 Types : 1x19 (ri High breaking stra 1x19 12,1021x7 538 Finish 3.0 mm : Bright a 16,473 731 - Extremely low stre 3.5 mm 1x19 7x7 7x19 20,500 4.0 mm 956 30,300 4.5 mm 1,206 Application: Balustra 5.0 mm 1,490 architec 38 2,150 6.0 mm Recomm 59 2,930 7.0 mm 145 8.0 mm 3,400 258 - Enhanced corr 5,310 Code: 10.0 mm Benefits MFW...U 374 7,650 12.0 mm of descaling an 581 14.0 mm 10,400 Maintenance: ResultingWire in lo 733 16.0 mm 13,600 1,030 18.0 mm 19,300 resistance, beto See 1,312 23,900 20.0 mm

HAMMA X-STRA

HAMMA MEG

Material : 316 Stainless S Sizes : 0.8mm - 19mm Benefits Designe Types : 1x19 -(rigid), 7x *Refer to p.105 for our guidelines on Safe Working Loads. stainles Finish : Bright and sm

106

Online catalogue: www.anzor.co.nz/wire

Types Balustrades, : A conve Application: s Material : 316 Sta architectural ri Sizes Recommended : 20mm -


High tensile rods systems High tensile rods systems

Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages during the drawing process to ensure wire cable systems. Hamma cables are develope d exclusivel y for high does not work harden, finished by the passing through an to ultrasonic Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealingand stages during drawing process ensure wire tensile performances through unique techniques that differentiate from bath todoes remove anyharden, impuritie that may have attache cable systems. Hamma cables are develope d exclusivel y for high not work ands finished by passing throughdanduring ultrasonic other manufactures. Hamma cables withtechniques the highest of from manufacture makes cable unique raising ultimate tensile performances throughstart unique thatquality differentiate bath .toThis remove anyHamma impuritie s that may in have attache d during stainless steel follow byHamma unique descaling of with stainless steel rod corrosion resistance. for andcable severe localinconditions as othersource manufactures. cables start the highest quality of manufacture Thisextreme makes harsh Hamma unique raising ultimate to remove impurities, which may follow have attached transport, prior tosteel rod well ascorrosion increased work lifefordue to theharsh multiple processes, stainless steel source by uniqueduring descaling of stainless resistance extreme and annealing severe local conditions as commencing production. ensuring longevity of the work wire. life Hamma cables are ensured of superior to remove impurities, which may have attached during transport, prior to well as increased due to the multiple annealing processes, aesthetic finish longevity due to an excellent surfacecables brightness and smooth commencing production. ensuring of the wire. Hamma are ensured of superior Types finish : 1x19 7x7 (semi-flexible), 7x19 (flexible) due (rigid), to an excellent surface brightness and smooth exterior.aesthetic : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior.Types

HAMMA 316 HIGH TENSILE CABLE

HAMMA PRO-STRAND HAMMA PRO-STRAND

HAMMA PRO-STRAND

Benefits - Built with Micro Stretch Technology (MST), the Minimum Breaking Benefits - Built with Micro Stretch Technology (MST), the Minimum Strength (MBS) is 20-30% higher than conventional 1x19 wireBreaking of the Strength 20-30% higher than conventional 1x19cable wire of the same size. This (MBS) meansisthat you can downsize the structural same size. meansThis thatresults you can structural less cable and maintain theThis strength. indownsize improvedthe aesthetics, maintain the strength. results improved aesthetics, weightand in the structure, and costThis savings oninsmaller fittings, whichless in theon structure, and cost savings on smaller fittings, which can beweight significant large projects. can be significant on large projects.

etch retch etch Technologies Technologies Technologies

1.0 .0 0

1x7 1x19 1x25 16.0 16.0 16.0

19.0 19.0 19.0

1x25 1x25 1x25

1x25 1x25 1x25

12.0 12.0 12.0

14.0 14.0 14.0

x19 19 19

1x19 1x19 1x19

1x25 1x25 1x25

1.20 20 20

150.63 150.63 188.29 188.29 188.29 84.73 84.73 84.73 113.586 113.586 113.586 150.63

: Compact wire strand in constructions 1x7, 1x19, 1x25 Types Types : Compact wire strand in constructions 1x7, 1x19, 1x25 Material : 316 Stainless Steel Material : 316 Stainless Steel Sizes : 1.6mm - 12mm Sizes : 1.6mm - 12mm Finish Finish : Bright and smooth for increased corrosion resistance. : Bright and smooth for increased corrosion resistance.

500 500 500 14,400 25,600 25,600 32,000 32,000 32,000 14,400 14,400 19,300 19,300 19,300 25,600

AVAILABLE TO ORDER

2.39 .39 .39 141.22 251.05 251.05 313.81 313.81 313.81 141.22 141.22 189.27 189.27 189.27 251.05 *Z *Z *Z DIN DIN DIN18800 18800 18800 R,D R,D R,D with Micro-stretch Technologies. with Micro-stretch Technologies.

1x7

Extreme Extreme ExtremeCondition Condition ConditionGear Gear Gear

3.5 .5 5

4.5 4.5 4.5

444

4.8 4.8 4.8

555

1x19 1x19 1x19

1x19 1x19 1x19

06 06 .06

7.88 7.88 7.88

10.01 10.01 10.01

METRIC 12.39 12.39 11.39 11.39 11.39 12.39

030 030 30

INCH 1x19 1,702 7x7 1,935 7x19 2,100 2,100 2,100 1,340 1,340 1,340 1,702 1,702 1,935 1,935

0.1 0.1 .1

INCH 20.59 18.98 18.98 18.98 20.59 20.59 13.14 13.14 13.14 16.69 16.69 16.69Construction Construction Limit Tension* (kN)

x19 19 19

1x19 1x19 1x19

1x19 7x7 METRIC

1x19 1x19 1x19

Micro-stretch Technologies HAMMA X-STRAND HAMMA X-STRAND

with Micro-stretch Technologies.

1x19 1x19 1x19

2” 2” /2”

1x19

3/16” 3/16” 3/16”

x19 x19 19

14 14 14

1x19 1x7

SpecificSpecific features: features: - Extremely non-flexible. - Smooth cleanclean finish. - Extremely non-flexible. - Smooth finish. - High -breaking strain.strain. - No -pre-stress required. High breaking No pre-stress required. - Extremely low stretch. - Extremely low stretch.

with Micro-stretch Technologies.

5/32” 5/32” 5/32”

2.7 2.7 .7

Application: Predominantly used for structural cables, e.g glass facades Application: Predominantly used for structural cables, e.g glass facades

Delivery approx 4 Weeks

2.0

2.5

7x19 5/64” 2.0

3.0

4.0

2.5

3.0

4.0 5/32”

5/64” 1x7

1x7

1x7

5/32” 1x7

1x7 2.60

1x7 4.06

1x7 5.88

1x7 10.47

min. Tension* Limit (kN) 2.60 4.06 5.88 10.47 (Kgf ) 450 700 1,025 1,795 14.3 14.3 14.3 16 16 16 19 19 19 Breaking min. kN)) ((Kgf 450 700 1,025 1,795 Load* 4.41 6.86 10.05 17.60 Breaking 9/16” 9/16” 9/16” 5/8” 5/8” 5/8” (kN) Load* 4.41 6.86 10.05 17.60 *For information on Safe Working Loads, 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19

1x19 14.36

1x19 1x19 1x19 1x19 1x19 1x19 20.89 28.89 36.19 46.48 57.49 71.20 Material : 316 Stainless Steel : 3166,500 Stainless Steel10,250 14.36 Material 20.89 Sizes 28.89 36.19 46.48 57.49 71.20 2,600 3,700 5,100 9,000 13,500 : 0.8mm - 19mm

Sizes

: 0.8mm - 19mm

1x25 1x25 113.586 150.63

1x25 188.29

84.73 113.586 150.63 14,400 19,300 25,600

1x19 84.73

188.29 32,000

: 1x19 88.26 (rigid), 7x7 (semi-flexible), 7x19 (flexible) 2,600 36.28 3,700 Types 5,100 6,500 10,250 13,500 14,400 19,300 25.50 50.01 63.74 100.52 132.39 7x19 141.22 189.27 25,600 251.05 32,000 313.81 Types : 1x19 (rigid),9,000 7x7 (semi-flexible), (flexible) Finish : Bright and smooth for increased corrosion resistance. 25.50 Finish 36.28 50.01 63.74 88.26 100.52 132.39 corrosion 141.22 189.27 251.05 : Bright and smooth for increased resistance. *ZR,D DIN313.81 18800

go to p.105.

555 555 ,555 16,473 16,473 16,473 17,186 17,186 17,186 20,500 20,500 20,500 30,300 30,300 30,300

2.93 2.93 .93 161.54 161.54 161.54 168.54 168.54 168.54 201.04 201.04 201.04 297.14 297.14 297.14

Micro-stretch Technologies

- Enhanced resistance. Produced with a16.0 high 6.0 Benefits 7.0- Enhanced 8.0 9.0 corrosion 10.0 11.0 Produced 12.0 14.0a 19.0 Benefits corrosion resistance. with high levellevel of descaling and ultrasonic removal of impurities. and ultrasonic removal of impurities. 5.0 6.0 7.0 of descaling 8.0 9.0 10.0 11.0 12.0 14.0 16.0 19.0 5/16” 3/8” 7/16” Resulting in longer lasting and ultimate corrosion Resulting in longer lasting shineshine and ultimate corrosion 5/16” 3/8” 7/16” 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x25 1x25 1x25 resistance, forharsh NZ’s harsh corrosive conditions. resistance, better better for NZ’s corrosive conditions. 5.0

Application: Balustrades, shade sails, foliage trellises, and *ZR,D DIN 18800 Application: Balustrades, shaderigging. sails, foliage trellises, and architectural architectural rigging. for exterior use in coastal areas. Recommended Extreme Condition Gear Recommended for exterior use in coastal areas. Code: Extreme Condition Gear MFW...U 2.5 3 3.2 3.5 4 4.5 4.8 5 1.6 Code: 2 2.4 MFW...U &4maintained 1.6 2 Maintenance: 2.4 2.5 Wire3rope must 3.2 be cleaned 3.5 4.5 regularly. 4.8 5 1/8” 5/32” 3/16” 1/16” 5/64” 3/32” Maintenance: Wire rope must be cleaned & & Cleaning maintained regularly. See our Maintenance guidelines on p.21. 1/16” 5/64” 3/32” 1/8” 5/32” 3/16” 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 See our Maintenance & Cleaning guidelines on p.21.

METRIC

0.8

1.0

1.2

METRIC INCH

0.8

1.0

1.2 3/64”

1.5

INCH Construction

1x19

1x19

3/64” 1x19

1x19

Ultimate Ultimate UltimateStructural Structural StructuralLimit cable cable cable Construction Tension* (kN)

1x19 0.31

1x19 0.49

1x19 0.71

1x19 1. 11

1x19 1.27

min. Tension* Limit (kN) (Kgf ) 36 36 36 Breaking 42 42 42 min. kN)) ((Kgf Load Breaking (kN) Load 1x61 1x61 1x61 1x61 1x61 1x61

0.31 53

0.49 84

0.71 121

1. 11 189

1.27 215

53 0.52

84 0.82

121 1.19

189 1.85

stainless steelstructural strand 1,030 on the market. 1,935 2,100 215 Benefits 336 483 525 756 861 1,340 1,702 3.3 4.74 5.15 8.44 10.1 13.14 16.69 20.59 2.11 - Designed for7.41 large projects. To date this 18.98 is the largest

0.52

0.82

1.19

1.85

2.11

METRIC 672.00 672.00 672.00

5.5

6

6.4

7

7.2

METRIC INCH 114,208 114,208 114,208

11

56 66

601.98 601.98 601.98

61 11

98,606 98,606 98,606

4

967 967 967

1.5

5.5 7/32”

6

6.4 1/4”

7

7.2 9/32”

INCH Construction 1,120 1,120 1,120

7/32” 1x19

1x19

1/4” 1x19

1x19

9/32” 1x19

Construction

1x19

1x19

1x19

1x19

1x19

min. (Kgf ) Breaking min. kN)) ((Kgf Load Breaking ) (kNcable Load with Ultimate Structural

2,639

3,030

3,442

4,120

4,357

2,639 25.88

3,030 29.71

3,442 33.75

4,120 40.4

4,357 42.73

25.88

29.71

33.75

40.4

42.73

1x37

with Ultimate Structural cable

1x37

1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 2.84 3.09MEGA-STRAND 4.45 5.06 6.06 7.88 10.01 11.39 12.39 1.98 HAMMA HAMMA 12.39 1.98 2.84 3.09 4.45 5.06 6.06 7.88 10.01 11.39 483 MEGA-STRAND 525 756 861 1,030 1,340 1,702 1,935 2,100 336 Benefits - Designed for large structural projects. To date this is the largest

1x61

on the10.1 market. 18.98 20.59 4.74stainless 5.15 steel 7.41strand 8.44 13.14 16.69 Types : A conventional 1x37 and 1x61 construction wire stand. :10316 Stainless 8 Material 9.6 11.1 1x37Steel 12 12.7construction 14 14.3 16 19 Types : A conventional and 1x61 wire stand. Sizes: 316 Stainless : 20mm -Steel 42mm. Material 8 9.6 10 11.1 12 12.7 14 14.3 16 19 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” : Bright and smooth for increased corrosion resistance. Sizes Finish : 20mm - 42mm. 5/16” 3/8” 1/2”such1x19 9/16” 5/8” 1x19 Application: 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 Large7/16” structural projects, as bridges. Finish : Bright and smooth for increased corrosion resistance. 1x19 Specific 1x19Large 1x19 1x19 projects, 1x19 such 1x19as bridges. 1x19 1x19 1x19 1x19 Application: structural features: - Low stretch. 5,380 7,746 8,400 10,574 12,102 13,555 16,473 17,186 20,500 30,300 Specific features: - Higher comparative breaking strain. 5,380 - 75.96 7,746 8,400cable 10,574 12,102 13,555 161.54 16,473 168.54 17,186 201.04 20,500 297.14 30,300 Low stretch. 52.76 82.38 103.7 118.68 132.93 - Wide size range. Higher comparative breaking strain. with both splicing swaging. - Compatible 52.76 - 75.96 82.38 103.7 118.68 132.93and 161.54 168.54 201.04 297.14 - Wide- cable range.resistance. Goodsize corrosion - Compatible with both splicing and swaging. - Good corrosion resistance. 3.3

Ultimate Structural cable

1x61

METRIC

20

22

24.3

28

30

34

METRIC INCH

20

22

24.3

28

30

34

INCH Construction

1x37

1x37

1x37

1x37

1x61

Construction Limit Tension (kN)

1x37 197.40

1x37 240.60

1x37 274.32

1x37 375.72

1x61 465.78

min. Tension(Kgf Limit (kN) ) Breaking min. kN)) ((Kgf Load* Copyright © 2011 Strudyna Breaking

197.40 31,713

Ultimate Structural cable 36

42

1x61

1x61

1x61

1x61 568.56

1x61 601.98

1x61 672.00

601.98 98,606

672.00 114,208

98,606 967

114,208 1,120

240.60 274.32 375.72 465.78 568.56 38,647 46,499 63,630 78,824 96,261 Online catalogue: www.anzor.co.nz/wire

31,713 38,647 46,499 63,630 78,824 311 Information 379 456 624 of Strudyna 773 used exclusively under permission Co. Ltd

42

36

96,261 944

107


Application: Balustrades, shade sails, foliage trellises, and Benefits - Enhanced corrosion resistance. Produced with a high level architectural rigging. of descaling and ultrasonic removal of impurities. Recommended for exterior use in coastal areas. Micro-stretch Technologies in longer lasting shine and ultimate Benefits Resulting - Enhanced corrosion resistance. Produced with corrosion a high level resistance, better for NZ’s harsh corrosive conditions. Code: Micro-stretch Technologies MFW...U of descaling and ultrasonic removal of impurities. 19.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 16.0 2.5 3.0 12.0 14.0 Resulting in longer lasting shine and ultimate corrosion Maintenance: Wire rope must be cleaned & maintained regularly. 5/32” 5/16” 3/8” 7/16” 19.0 4.0 5.0 6.0 7.0 : 316 8.0 9.0 Steel 10.0for NZ’s 11.0 harsh 16.0 2.5 3.0 12.0 14.0conditions. Material Stainless resistance, better corrosive See our Maintenance & Cleaning guidelines on p.21. 1x19 1x19 1x19 1x25 1x25 1x7 1x7 1x7 1x19 Sizes 1x19 1x19: 0.8mm 1x19 - 19mm 1x19 1x25 5/32” 5/16” 3/8” 7/16” : 316 Stainless Steel TypesMaterial : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) 28.89 36.19 46.48 57.49 71.20 150.63 188.29 4.06 5.88 10.47 14.36 20.89 84.73 1x19 1x19 1x19 1x25 1x25 1x7 1x7 1x7 1x19 1x19 1x19 1x19 1x19 113.586 1x25 : 0.8mm - 19mm FinishSizes : Bright and smooth for increased corrosion resistance. Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) 2,600 3,700 5,100 6,500 9,000 10,250 13,500 25,600 32,000 700 1,025 1,795 14,400 19,300 28.89 36.19 46.48 57.49 71.20 4.06 5.88 10.47 14.36 20.89 84.73 113.586 150.63 188.29 Benefits - Designed for large structural To date is thefor largest Finish projects. : Bright andthis smooth increased corrosion resistance. Application: Balustrades, shade sails,13,500 foliage141.22 trellises, and 25,600 251.05 32,000 313.81 17.60 25.50 36.28 50.01 63.74 100.52 132.39 6.86 10.05 stainless 189.27 2,600 3,700on the 5,100 6,500 88.26 9,000 10,250 700 1,025 1,795 14,400 19,300 steel strand market.

HAMMA X-STRAND

with Micro-stretch Technologies.

1x19

7x7

7x19

with Micro-stretch Technologies.

1x19METRIC 7x7

7x19 2.0

INCH METRIC

5/64” 2.0

Construction INCH

1x7 5/64”

min. Tension* (Kgf ) Limit (kN) Breaking ( kN ) min. Load* (Kgf ) Breaking (kN) Load*

450 2.60

2.60 Limit Tension* 1x7TENSILE Construction HAMMA 316 (kN) HIGH HAMMACABLE MEGA-STRAND 4.41 450

architectural rigging.

INCH METRIC

0.8

Construction INCH

1x19

Limit Tension* (kN) Construction

0.31 1x19

min. Tension* (Kgf ) Limit (kN) Breaking 1x37 1x61 ( kN ) min. Load (Kgf ) Breaking (kN) Load

53 0.31

*Z DIN313.81 18800 Balustrades, foliage trellises, and 251.05 17.60 25.50 36.28 Application: 50.01 63.74 88.26 shade 100.52 sails, 132.39 141.22 189.27 A conventional 1x37 and 1x61 construction wire stand. Recommended exterior use in coastal areas. R,D architectural for rigging. DIN 18800 *Z 316 Stainless Steel Recommended for exterior use in coastal areas. R,D MFW...U 20mm - 42mm. Code: Bright and smooth for Code: increased corrosion resistance. Extreme Condition Gear MFW...U Maintenance: Wire rope must be cleaned & maintained regularly. Large structural projects, such as bridges. Condition Gear rope must &Extreme See our Maintenance &3.5 Cleaning guidelines on 2 Maintenance: 2.4 2.5 Wire 3 3.2 be cleaned 4maintained 4.5 regularly. 4.8p.21. 5 1.0 1.2 1.5 1.6 Specific features: See our Maintenance & Cleaning guidelines on p.21. 3/16” 1/16” 5/64” 3/32” 1/8” 5/32” 3/64” 5 2 2.4 2.5 3 3.2 3.5 4 4.5 4.8 1.0 1.2 1.5 1.6 - Low stretch. - Higher comparative strain. 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 breaking 1x19 1x19 1x19 1x19 3/16” 1/16” 5/64” 3/32” 1/8” 5/32” 3/64” - Wide cable size range. Benefits - Designed for structural date this largest 4.45large 5.06 6.06 projects. 7.88 To 10.01 11.39 12.39 0.49 0.71 1.11 with 1.27both 1.98 2.84 3.09 1x19 1x19 1x19 1x19is the 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 splicing and swaging. - Compatible Benefits - Designed for large structural projects. To date this is the largest stainless steel strand on the market. - Good 1.11 corrosion resistance. 483 525 756steel 5.06 861 1,030 1,340 1,702 1,935 2,100 84 121 189 215 336 stainless strand on the market. 4.45 6.06 7.88 10.01 11.39 12.39 0.49 0.71 1.27 1.98 2.84 3.09

0.52 53

0.82 84

1.19 121

1.85 189

0.52

0.82

1.19

1.85

METRIC

5.5

6

6.4

7

INCH METRIC

7/32” 5.5

6

1/4” 6.4

7

Construction INCH

1x19 7/32”

1x19

1x19 1/4”

1x19 1x19

4.41

6.86

10.05

Types : Material : Sizes : Finish : Application:

HAMMA MEGA-STRAND METRIC 0.8

Construction min. (Kgf ) Breaking kN ) min. with Ultimate Structural Load ((Kgf cable) with Ultimate Structural cable Breaking (kN) Load

HAMMA MEGA-STRAND

HAMMA MEGA-STRAND

1x19

1x19

1x19

2,639

3,030

3,442 4,120 TO ORDER

25.88 2,639

29.71 3,030

Delivery 33.75 40.4 3,442 4,120 Weeks

25.88

29.71

33.75

1x37

AVAILABLE approx

4

1x37

1x61

40.4

1x61

20.59 3.3 4.74 5.15 7.41 8.44 10.1 13.14 16.69 18.98 483 525 756 1x37 861 and1,030 1,340 1,702 1,935 2,100 336 Types 1x61 construction Types : A conventional : A conventional 1x37 and 1x61 constructionwire wire stand. stand. Material Stainless 20.59 3.3 Material 4.74: 316 7.41 Steel 8.44 10.1 13.14 16.69 18.98 :5.15 316 Stainless Steel SizesSizes : 20mm - 42mm. : 20mm - 42mm. 7.2 8 9.6 10 11.1 12 12.7 14 14.3 16 19 FinishFinish : Bright andand smooth forfor increased : Bright smooth increasedcorrosion corrosionresistance. resistance. 9/32” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 7.2 8 Application: 9.6 Large 10 11.1 12 12.7 14 14.3 16 19 Application: Large structural projects, such bridges. structural projects, such asas bridges. 2.11 215 2.11

1x19 9/32”

1x19 Specific 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 5/16” 3/8” features: 7/16” 1/2” 9/16” 5/8” Specific features: Low stretch. 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 -1x19 Low stretch. - Higher comparative breaking strain. -7,746 Higher comparative breaking strain. 4,357 5,380 8,400 10,574 12,102 13,555 16,473 17,186 20,500 30,300 - Wide cable size range. - Wide cable size range. 42.73 52.76 75.96 82.38 103.7 118.68splicing 132.93 161.54 168.54 297.14 with 12,102 both swaging. 4,357 5,380 7,746 - Compatible 8,400 10,574 13,555and 16,473 17,186 201.04 20,500 30,300 - Compatible with both splicing and swaging. - Good corrosion resistance. 42.73 52.76 75.96 82.38 103.7 118.68 132.93 161.54 168.54 201.04 297.14 - Good corrosion resistance.

Ultimate Structural cable

METRIC

20

22

24.3

28

30

34

INCH METRIC

20

22

24.3

28

30

34

Ultimate Structural cable 36 36

42 42

Construction INCH

1x37

1x37

1x37

1x37

1x61

1x61

1x61

1x61

Limit Tension (kN) Construction

197.40 1x37

240.60 1x37

274.32 1x37

375.72 1x37

465.78 1x61

568.56 1x61

601.98 1x61

672.00 1x61

min. Tension(Kgf ) Limit (kN) Breaking kN)) min. Load* ((Kgf Breaking (kN) Load*

31,713 197.40

38,647 240.60

46,499 274.32

63,630 375.72

78,824 465.78

96,261 568.56

98,606 601.98

114,208 672.00

311 31,713

379 38,647

456 46,499

624 63,630

773 78,824

944 96,261

967 98,606

1,120 114,208

624

773

944

967

1,120

311 456 *For information on Safe Working379 Loads, go to p.105.

108

Online catalogue: www.anzor.co.nz/wire-rigging Information used exclusively under permission of Strudyna Co. Ltd

Copyright © 2011 Strudyna


Wire Rigging Systems  

Anzor's range of stainless steel wire rigging systems.

Advertisement
Read more
Read more
Similar to
Popular now
Just for you