PRODUCT SELECTOR
Tufbloc is available at Anutone Shoppes and distributor stockpoints, from July 2010, as precut sheets in matt surface ‘Normal’ or smooth-glossy ‘Mirror’ finish both of which with a rough rear-side. Taper edge option is available in Normal 8, 10,12mm thickness. While selecting the right variant for your project, you need to make the following two choices: •
By thickness – choose the thickness from 4mm to 12mm that best suits the application
•
By surface finish – choose either ‘Normal’ if being used as a backer board or ‘Mirror’ if being used as a finished, exposed surface that requires Level 5 trim (eggshell finish)
Tufbloc 20 Normal Thickness (mm)
Edge
Size (mm)
Surface Density (kgs/m2)
Weight / board (kgs)
4
Square
1200x2400
4.8
13.8
6
Square
1200x2400
7.2
20.7
Tufbloc 30 Normal Thickness (mm)
Edge
Size (mm)
Surface Density (kgs/m2)
Weight / board (kgs)
8
Taper
1200x2400
9.6
27.7
10
Taper
1200x2400
12.0
34.6
12
Taper
1200x2400
14.4
41.5
Tufbloc 20 Mirror Thickness (mm)
Edge
Size (mm)
Surface Density (kgs/m2)
Weight / board (kgs)
4
Square
1200x2400
4.8
13.8
6
Square
1200x2400
7.2
20.7
8
Square
1200x2400
9.6
27.7
10
Square
1200x2400
12.0
34.6
12
Square
1200x2400
14.4
41.5
Density 1100~1200 kgs/m3 Approximate Average ~1150 kgs/m3 Note - Surface density and weight per board are approximate 1200x2400mm boards can be field cut in half to 1200x1200mm for easy handling in high ceiling applications, if necessary
6
Tufbloc