Page 1


"EXAGGERATE, WITH LED TECHNOLOGY SAVING HAS COME TRUE. With our LED lamps every part of the living area has its right lighting balance. No more dark spaces in order save energy, but a totally and comfortably lit area. It is with this slogan that we started introducing our company in the market with the first range of led lights." This was back in 2005 and ahead of times, we had to face the indifference of a market that was just dawning but was looking at our products with interest. We now thank again those who trusted us back then and keep today. Thanks to them we achieved important goals in Italy and abroad. Our unfailing committance to research in terms of product quality and improvement of service to the customer attests our awareness in pursuing these values. In today's market, which is more mature, we have a good share, although there is a strong presence of products which classify the Led as the ultimate bargain instead of a winning technology. Regrettably, these products, poor in quality and scarcely reliable, confuse and damage the end customer. With the new CATALOGUE 7.0 1011 Tecnoled confirms the willingness to offer the most complete Led light range dedicated to leisure vehicles. This goal is also supported by technical information which are more and more detailed and easy to understand. "Between led and LED, TECNOLED makes the difference" ; a difference that we invite you to discover not only by reading the information on the products but comparing them with other brands trough our interactive displays available at the most qualified dealers for motorhome accessories. The future? The future is our present because the research within Tecnoled is continuous and constant. Our aim has always been that of proposing products which are more and more performing and of a good quality. This philosophy has now been applied also to marine, domestic and business with customized products that respond to the different types of use.


THE LED RANGE TECHNOLOGY 5 mm SUPERBRIGHT LEDs are very small, their nominal energy consumption is 20mA with a brightness from 1,5 to 2 Lumen, depending on the white colour used (K5000,K3000) and on the diffusion level (the lower the diffusion, the higher the brightness but more focused). Dispersed heat is very contained for this kind of LED and it is therefore perfectly suitable for compact multi-LED modules. This type of led is definitely the most diffused due to its affordable cost. It is however important to pay attention to its quality and characteristics. In facts, there are numerous spots available in the market with poor quality Leds and this is visible because of a blue colour of light and a very restricted light beam. Tecnoled has started its adventure in 2005 exactly with this type of led, carefully selecting the best quality that ensure a NEUTRAL WHITE colour and a SEMIDIFFUSED light beam. SMD LEDs are very small and are available in different sizes that make them suitable for specific purposes. Also this kind of LED is for us a light source and even though this kind of led is mainly used for decoration, we selected the best LED units to create versatile MODULES to be used in various indirect-and direct-light applications with a top performance. These LEDs have a nominal energy consumption of 20-30mA and generate very wide light beams (120째).Lately, the most valuable manufacturers have designed "multi chip" versions which guarantee a high performance light power. Tecnoled uses the 3528 and 5050 version. POWER LEDs are bigger, their nominal energy consumption varies from 350mA to 1000mA, the intenser brightness and the higher tension absorption level contribute to generate heat and it is necessary to use heat dissipators. With the right heat dissipating bodies, we manufactured some kinds of spotlights which, if used with tension-regulating electronic installations, are very reliable and guarantee a constant light even with an irregular tension. Today PowerLeds' performance is comparable and even better than traditional incandescent light bulbs. Tecnoled uses the XP and XR types, making a selection that guarantees the best performance for their use in leisure vehicles. With a light luminosity that goes from 74 and more than 140 lumen and with a wide light diffusion of 110째, these Leds replace halogen and fluorescent lights superbly. The high temperatures normally generated by the Power Led when switched on which causes the use of big dissipators has been overcome by Tecnoled by sorting out high quality Leds with high junction temperatures (150째C) that coupled with proper electronic circuits and current regulators guarantee a high reliability and a constant luminosity against power supply voltage swings. At the moment The ULTRA-POWER LEDs represent the top of innovative LED lighting. With a power that goes from 5 to 60W it is the appropriate technology needed to produce lamps to replace halogens up to 300W. Tecnoled uses this type of Leds most of all in its business range, with a luminosity that goes from 400 and more than 3000 lm and available in WARM or NEUTRAL WHITE.

3


TECHNOLOGY...

The unrestrainble evolution of the Led lighting represents its distinctive and more evident characteristic. In fact, there have been many changes since 2005, when Tecnoled started to propose this type of lighting in the leisure market. Seven years ago we had been able to select the best Super Bright 5mm LEDS with which we have created spots that replace the halogen lights, gaining very good results that are still appreciated from many customers. Today Tecnoled holds fast to those principals that moved the company at its dawn, devoted to the saying "the better technology for each application". Moreover, this concept is applied not only in the production for leisure vehicles but also in the marine, business and home market.

WHAT HAT DOES RELIABILITY MEAN? A right planning of the circuit in order to control tension and limit temperature and a constant monitoring of the application make the reliability of a LED lamp. Theoretically, a LED working with normal tension levels and ambient temperature (25째C) has a 100.000 hours life. Considering tension levels that can be tolerated, high temperatures reduce LEDs life; 30.000...50,000 hours in different conditions can anyway be considered as the product's average life (420h/month = 5000h/year =10 years !!!).


OUR LINES OF PRODUCTS

5

Our constant efforts to obtain the best results, enables us to offer a wide range of models which can satisfy every customer's request, in this catalogue we have selected the items which better meet the needs of the most qualified manufacturer. The following table helps to identify quickly the most interesting products according to their features: RECOMMENDED APPLICATION, LIGHT BEAM, LIGHT COLOUR

LIGHT BEAM

LIGHT COLOUR

Ref. page

or ol C

te hi W

fu if D

w

d se

if i-d em

W a hi rm te

se fu

t en S

em av P

U w nd al e l r un th e W it al l

lin ei C

R

ep

la

g

ce

d

RECOMMENDED APPLICATION

8...10 11 12...16 17 18...26 30...31 32...37 38...41 42...43 44...50 51 52...54 55...56 57...61 62...63 64...65


7

SUMMARY RANGE REPLACE

PAGE

8

RANGE BUILT-IN SPOTLIGHTS

PAGE

18

RANGE SURFACE MOUNT SPOT LIGHTS

PAGE

24

RANGE MICRO SPOT LIGHTS

PAGE

30

RANGE LINEAR LIGHTS

PAGE

32

RANGE FLEXIBLE SPOTLIGHTS

PAGE

38

RANGE PLEXY CEILING LAMPS

PAGE

42

RANGE BASIC MODULES

PAGE

52

RANGE ACCESSORIES AND REPLACEMENTS PAGE

62

Tecnoled Bartolacci Design Via Lisbona 7/A 50065 PONTASSIEVE (Firenze) ITALIA tel. +39 055 83 45 116 - fax +39 055 83 25 736 info@tecnoled.it - www.tecnoled.it


RANGE REPLACE With "REPLACE" we confirm the range of modules that replace halogen and fluorescent lamps in all existing standard spotlights and ceiling lamps of your vehicle. Considering our extensive range, in order to choose the proper product, we suggest to pay particular attention to the notes and technical specifications that you can find below all items. But most important‌catch the difference of every item, comparing it with what else available in the market. 1 LED POWER XP module WARM WHITE (WW) or NEUTRAL WHITE (NW) with G4 or MR type connection and power regulator, to replace the 10W halogen lamp. These circuits are protected against the polar inversion; therefore it is not necessary to pay attention to the correct wiring of the two poles.

Item no. 01100103001 - G4 33.1XPWW Item no. 01100102002 - G4 63.1XPNW Item no. 01100103012 - VRT 33.1XPWW Item no. 01100102013 - VRT 63.1XPNW Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Dimensions:

Examples

WARM WHITE K3600 107/30LUX at 0,5/1m NEUTRAL WHITE K5000 123/35LUX at 0,5/1m 0,10A - 1,2W (12,7V) 7‌30V D.C. (mm) 30 x 23 x h 6


2 LEDs POWER XP module WARM WHITE (WW) or NEUTRAL WHITE (NW) with G4 or MR type connection and power regulator, to replace the 20W halogen lamp. These circuits are protected against the polar inversion; therefore it is not necessary to pay attention to the correct wiring of the two poles.

Item no. 01100203005 - G4 33.2XPWW Item no. 01100202006 - G4 63.2XPNW Item no. 01100203007 - VRT 33.2XPWW Item no. 01100202008 - VRT 63.2XPNW Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Dimensions:

WARM WHITE K3600 195/56LUX at 0,5/1m NEUTRAL WHITE K5000 246/71LUX at 0,5/1m 0,16A - 2,0W (12,7V) 7…30V D.C. (mm) 30 x 23 x h 6

1 LED POWER CLN module WARM WHITE (WW) or NEUTRAL WHITE (NW) with G4 or MR type connection and power regulator, to replace the 10W halogen lamp. These circuits are protected against the polar inversion; therefore it is not necessary to pay attention to the correct wiring of the two poles.

Item no. 01100103003 - G4 34.1CLNWW Item no. 01100101004 - G4 64.1CLNCW Item no. 01100103010 - VRT 34.1CLNWW Item no. 01100101011 - VRT 64.1CLNCW Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Dimensions:

WARM WHITE K3200…3600 101/29LUX at 0,5/1m COLD WHITE K5500…6500 112/32LUX at 0,5/1m 0,10A - 1,2W (12,7V) 7…30V D.C. (mm) 30 x 23 x h 6

9


RANGE REPLACE 21 LEDs SMD 3528 module, WARM WHITE (WW) with G4 connection to replace the 10W halogen lamp. These circuits are protected against the polar inversion; therefore it is not necessary to pay attention to the correct wiring of the two poles.

Item no. 01202103009 - G4 35.21 3528WW Light colour: Luminosity: Electrical input: Power supply: Dimensions:

WARM WHITE K3200…3600 136/37 LUX at 0,5/1m (12,7) 0,12A - 1,5W (12,7V) 10…15,2V D.C. (mm) 36 x h 6

12 LEDs SMD 3528 module, WARM WHITE (WW) with G4 connection to replace the 5W halogen lamp. These circuits are protected against the polar inversion; therefore it is not necessary to pay attention to the correct wiring of the two poles.

Item no. 01201203008 - G4 29.12 3528WW Item no. 01201203010 - VRT 29.12 3528WW Light colour: Luminosity: Electrical input: Power supply: Dimensions:

WARM WHITE K3200…3600 77/21 LUX at 0,5/1m (12,7) 0,07A - 0,9W (12,7V) 10…15,2V D.C. (mm) 29 x h 6

15 LEDs SMD 3528 module, WARM WHITE (WW) with diffused light beam 360°, with G4 connection to replace the 5W halogen lamp. These circuits are protected against the polar inversion; therefore it is not necessary to pay attention to the correct wiring of the two poles.

Item no. 01201503007 - VRT 36.15 3528WW Light colour: Luminosity: Electrical input: Power supply: Dimensions:

WARM WHITE K3200…3600 66/18 LUX at 0,5/1m (12,7) 0,13A - 1,7W (12,7V) 10…15,2V D.C. (mm) 18 x h 20


These modules equipped with adapter/dissipating disk enable to replace the halogen lamp in all spots with lateral connection. There are different diameters available in order to replace all existing standard spots installed in leisure vehicles. The original protection screen is no longer needed because these new LED spots do not emit any UV rays and they do not overheat either like halogen lamps. These type of modules gives a semi-diffused light beam in a NEUTRAL WHITE COLOUR.

21LEDs SUPER BRIGHT module + dissipating disk to replace 10W halogen lamp. Connector with pins. Item no. 02421011166 - 45.4421RNW (Ø 45) Item no. 02621011163 - 48.4421RNW (Ø 48,5) Item no. 02521011055 - 50.4421RNW (Ø 50) Light colour: Luminosity: Electrical input: Power supply: Dimensions:

NEUTRAL WHITE K5000 370/104LUX at 0,5/1m (12,7V) 0,10A - 1,3W (12,7V) 10…14,4V D.C. (mm) Diam. 45/48,5/50 x h.11

12LEDs SUPER BRIGHT module + dissipating disk to replace 5W halogen lamp. Connector with pins. Item no. 02212011043 - 40.3012RNW (Ø 40) Item no. 02312011046 - 43.3012RNW (Ø 43) Item no. 02412011049 - 45.3012RNW (Ø 45) Light colour: Luminosity: Electrical input: Power supply: Dimensions:

NEUTRAL WHITE K5000 210/69LUX at 0,5/1m (12,7V) 0,06A - 0,8W (12,7V) 10…14,4V D.C. (mm) Diam. 40/43/45 x h.11

9LEDs SUPER BRIGHT module + dissipating disk to replace 4W halogen lamp. Connector with pins. Item no. 02109011031 - 34.259RNW (Ø 34) Item no. 02209011034 - 40.259RNW (Ø 40) Light colour: Luminosity: Electrical input: Power supply: Dimensions:

NEUTRAL WHITE K5000 158/52 LUX at 0,5/1m (12,7V) 0,04A - 0,5W (12,7V) 10…14,4V D.C. (mm) Diam. 34/40 x h.11

11


RANGE REPLACE 3 LEDs POWER XP kit module WARM WHITE (WW) or NEUTRAL WHITE (NW) with power regulator to replace 11-16W 12V D.C. rounded fluorescent lamp. With aluminum dissipating square and spacers with screws. These circuits are protected against the polar inversion; therefore it is not necessary to pay attention to the correct wiring of the two poles.

Item no. 01100303029 - K8883 3XPWW Item no. 01100302030 - K8886 3XPNW Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Dimensions:

WARM WHITE K3600 389/108LUX at 0,5/1m NEUTRAL WHITE K5000 505/140LUX at 0,5/1m 0,39A - 4,9W (12,7V) 7‌30V D.C. (mm) Diam. 88,6 x 88,6 x h 22

The electric connection is made directly to the plant, so besides the fluorescent lamp it is necessary to take off its electronic circuit as well. On page 56 you will find only the modules without the dissipation kit that we suggest to use for fittings on metal surfaces. The potentiometer that we propose as accessory can be either fitted in the existing body of the ceiling lamp by making a hole of a proper diameter or for a remote fitting, with acrylic or double-sided tape cover. Thanks to this accessory it is possible to constantly adjust the light beam luminosity and at the same time as it decreases, the power intake decreases as well. Item no. 71500000003 - PTM 1A Item no. 71500000004 - M-PTM 1A


3 LEDs POWER XP kit module WARM WHITE (WW) or NEUTRAL WHITE (NW) with power regulator to replace 11-16W linear fluorescent lamp. With aluminium dissipating plate and spacers with screws for its fitting. These circuits are protected against the polar inversion; therefore it is not necessary to pay attention to the correct wiring of the two poles.

Item no. 01100303016 - K24023 3XPWW Item no. 01100302017 - K24026 3XPNW Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Dimensions:

WARM WHITE K3600 389/108LUX at 0,5/1m NEUTRAL WHITE K5000 505/140LUX at 0,5/1m 0,39A - 4,9W (12,7V) 7‌30V D.C. (mm) 240 x 20 x h 22 The electric connection is made directly to the plant, so besides the fluorescent lamp it is necessary to take off its electronic circuit as well. On page 56 you will find only the modules without the dissipation kit that we suggest to use for fittings on metal surfaces. The potentiometer that we propose as accessory can be either fitted in the existing body of the ceiling lamp by making a hole of a proper diameter or for a remote fitting, with acrylic or double-sided tape cover. Thanks to this accessory it is possible to constantly adjust the light beam luminosity and at the same time as it decreases, the power intake decreases as well.

Item no. 71500000003 - PTM 1A Item no. 71500000004 - M-PTM 1A

13


RANGE REPLACE The new LINEAR ULTRA-POWER LED with its brightness, has been designed to replace incandescent lightbulbs and halogens in small interior ceiling lamps fitted in different types of vehicles. It is available in WARM WHITE (WW) or COLD WHITE (CW) colours, and is provided with integrated power regulator for a constant brightness during power supply swinging. The Kit is made up of bulb, aluminium dissipating disk and screws for fitting.

Item no. 01100103024 - K13043 1UPLWW Item no. 01100101025 - K13046 1UPLCW Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Dimensions:

WARM WHITE K3200…3600 380/108LUX at 0,5/1m COLD WHITE K5500…6500 410/120LUX at 0,5/1m 0,42A - 5,2W (12,7V) 7…30V D.C. (mm) 130 x 43 x h 22

The new LINEAR ULTRA-POWER LED with its brightness, has been designed to replace incandescent lightbulbs and halogens in small exterior ceiling lamps fitted in different types of vehicles. It is available in WARM WHITE (WW) or COLD WHITE (CW) colours, and is provided with integrated power regulator for a constant brightness during power supply swinging. The Kit is made up of bulb, aluminium dissipating disk with standard inclination and screws for fitting.

Item no. 01100103027 - K9043 1UPL WW Item no. 01100101028 - K9046 1UPL CW Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Dimensions:

WARM WHITE K3200…3600 380/108LUX at 0,5/1m COLD WHITE K5500…6500 410/120LUX a 0,5/1m 0,42A - 5,2W (12,7V) 7…30V D.C. (mm) 90 x 40 x h 20


3 LEDs POWER XP kit module WARM WHITE (WW) or NEUTRAL WHITE (NW) with power regulator to replace 11W linear fluorescent outside lamp. With aluminium dissipating plate and screws for the fitting with standard inclination. These circuits are protected against the polar inversion; therefore it is not necessary to pay attention to the correct wiring of the two poles.

Item no. 01100303018 - K24033 3XPWW Item no. 01100302019 - K24036 3XPNW Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Dimensions:

WARM WHITE K3600 389/108LUX0,5/1m NEUTRAL WHITE K5000 505/140LUX at 0,5/1m 0,39A - 4,9W (12,7V) 7‌30V D.C. (mm) 240 x 30 x h 25 The electric connection is made directly to the plant, so besides the fluorescent lamp it is necessary to take off its electronic circuit as well. The potentiometer that we propose as accessory for a remote fitting, with acrylic or double-sided tape cover. Thanks to this accessory it is possible to constantly adjust the light beam luminosity and at the same time as it decreases, the power intake decreases as well.

Item no. 71500000004 - M-PTM 1A

15


RANGE REPLACE The solution for the replacement of T5 tube fluorescent lights is given by the linear SMD 5050 LEDs modules fitted on aluminium profiles. They are available in 3 lengths and 3 different power inputs. The colours available are WARM WHITE (WW) or COLD WHITE (CW). The electric connection is directly to the 12V, so it is sufficient to take out the fluorescent light and its electronic circuit.

Item no. 01201503011 - LNR T5-300 15 5050WW Item no. 01201501012 - LNR T5-300 15 5050CW Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Dimensions:

WARM WHITE K3200…3600 310/100LUX at 0,5/1m COLD WHITE K5500…6500 360/110LUX a 0,5/1m 0,28A - 3,5W (12,7V) 10…15,2V D.C. (mm) 285 x 12,5 x h 9,5

Item no. 01203003013 - LNR T5-550 30 5050WW Item no. 01203001014 - LNR T5-550 30 5050CW Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Dimensions:

WARM WHITE K3200…3600 610/210LUX at 0,5/1m COLD WHITE K5500…6500 700/240LUX at 0,5/1m 0,56A - 7,1W (12,7V) 10…15,2V D.C. (mm) 540 x 12,5 x h 9,5

Item no. 01204803015 - LNR T5-850 48 5050WW Item no. 01204801016 - LNR T5-850 48 5050CW Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Dimensions:

WARM WHITE K3200…3600 730/250LUX at 0,5/1m COLD WHITE K5500…6500 840/290LUX at 0,5/1m 0,90A - 11,5W (12,7V) 10…15,2V D.C. (mm) 840 x 12,5 x h 9,5

On page 58 is available only the flexible module in coils of 1m or 5m, suggested for fixing on metal surfaces.


Dichroic lamp with 24 or 6LEDs SMD WARM WHITE (WW) or COLD WHITE (CW) to replace MR16 and MR11 halogen lamps.

Item no. 16202403001 - MR16 G4.0 24.3528WW Item no. 16202401002 - MR16 G4.0 24.3528CW Light colour: WARM WHITE K3200…3600 Luminosity: 100/31LUX at 0,5/1m Light colour: COLD WHITE K5500…6500 Luminosity: 110/34LUX at 0,5/1m Electrical input: 0,11A - 1,3W (12,7V) Power supply: 10…14,4V D.C./A.C. Dimensions: STANDARD D.50mm MR16 - G4.0 D.1,4mm

Item no. 16200603003 - MR11 G4.0 6.3528WW Item no. 16200601004 - MR11 G4.0 6.3528CW Item no. 16200603007 - MR11 GU4.0 6.3528WW Item no. 16200601008 - MR11 GU4.0 6.3528CW Light colour: WARM WHITE K3200…3600 Luminosity: 38/11LUX at 0,5/1m Light colour: COLD WHITE K5500…6500 Luminosity: 45/13LUX at 0,5/1m Electrical input: 0,06A - 0,7W (12,7V) Power supply: 10…14,4V D.C./A.C. Dimensions: STANDARD D.35mm MR11 - G4.0 D. 1,4mm STANDARD D.35mm MR11 - GU4.0 D. 1mm

Item no. 16200603005 - MR11 GU4.0 6.5050WW Item no. 16200601006 - MR11 GU4.0 6.5050CW Light colour: WARM WHITE K3200…3600 Luminosity: 77/22LUX at 0,5/1m Light colour: COLD WHITE K5500…6500 Luminosity: 91/26LUX at 0,5/1m Electrical input: 0,07A - 0,9W (12,7V) Power supply: 10…28,6V D.C./A.C. Dimensions: STANDARD D.35mm MR11 - GU4.0 D. 1mm

17


RANGE BUILT-IN SPOTLIGHTS With these spotlights we bring standard lights in use in leisure vehicles up-to-date with LED technology. Some models are available with different type of lights. For a diffused light beam with WARM WHITE colour we propose the SMD range. For a semi-diffused light beam with NEUTRAL WHITE colour we propose the SUPER BRIGHT range. Last but not least, we also give the possibility of a total customization by supplying only the body to which you can couple the most proper light by choosing from our range of G4 modules.

RECESSED SPOT ST 119 TYPE Standard finishing: POLISHED CHROMED STEEL (CH) Dimensions: (mm) Ø 75 x h 25 Hole / Built in thickness: (mm) Ø 58/15

Item no. 11121065626 - ST 119CH 21WW Light colour: Luminosity: Electrical input: Power supply:

WARM WHITE K3600 110/32LUX at 0,5/1m (12,7V) 0,11 A - 1,4 W (12,7V) 10…15,2 V D.C.

Item no. 11112065666 - ST 119CH 12WW Light colour: Luminosity: Electrical input: Power supply:

Only body for G4 module Item no. 90100201001 ELC 119CH

Examples

WARM WHITE K3600 69/19LUX at 0,5/1m (12,7V) 0,06 A - 0,8 W (12,7V) 10…15,2 V D.C.


19 ADJUSTABLE RECESSED SPOTLIGHT ST 120 TYPE Standard finishing:

POLISHED CHROMED STEEL (CH) o o Item no. GRAY RAL7035 (SR) Dimensions: (mm) Ø 68 x h 30 Hole / Built in thickness: (mm) Ø 54/20

Item no. 11221065627 - ST 120CH 21WW Item no. 11221065708 - ST 120SR 21WW Light colour: Luminosity: Electrical input: Power supply:

WARM WHITE K3600 140/39LUX at 0,5/1m (12,7V) 0,11 A - 1,4 W (12,7V) 10…15,2 V D.C.

Item no. 11201203015 - ST 120CH 12WW Item no. 11201203016 - ST 120SR 12WW Light colour: Luminosity: Electrical input: Power supply:

WARM WHITE K3600 84/23LUX at 0,5/1m (12,7V) 0,06 A - 0,8 W (12,7V) 10…15,2 V D.C.

Item no. 11212011177 - ST 120CH 12NW Item no. 11212011570 - ST 120SR 12NW Light colour: Luminosity: Electrical input: Power supply:

Only body for G4 module Item no. 90100201002 ELC 120CH Item no. 90100202007 ELC 120SR

NEUTRAL WHITE K5000 210/69LUX at 0,5/1m (12,7V) 0,06A - 0,8W (12,7V) 10…14,4 V D.C.

Examples


RANGE BUILT-IN SPOTLIGHTS RECESSED SPOT ST 021 TYPE Standard finishing: POLISHED CHROMED STEEL (CH) Dimensions: (mm) Ø 69 x h 22 Hole / Built in thickness: (mm) Ø 58/18

Item no. 11121065713 - ST 021CH 21WW Light colour: Luminosity: Electrical input: Power supply:

Only body for G4 module Item no. 90100201008 ELC 021CH

Examples

WARM WHITE K3600 140/39LUX at 0,5/1m (12,7V) 0,11 A - 1,4 W (12,7V) 10…15,2 V D.C.


21 RECESSED SPOT ST 022 TYPE Standard finishing: POLISHED CHROMED STEEL (CH) Dimensions: (mm) 69 x 69 x h 22 Hole / Built in thickness: (mm) Ø 58/18

Item no. 11121065634 - ST 022CH 21WW Light colour: Luminosity: Electrical input: Power supply:

Only body for G4 module Item no. 90100201009 ELC 022CH

WARM WHITE K3600 140/39LUX at 0,5/1m (12,7V) 0,11 A - 1,4 W (12,7V) 10…15,2 V D.C.

Examples


RANGE BUILT-IN SPOTLIGHTS RECESSED SPOT HT 296 TYPE Standard finishing:

POLISHED CHROMED STEEL (CH) o Item no. GRAY RAL7035 (SR) Dimensions: (mm) Ø 75 x h 25 Hole / Built in thickness: (mm) Ø 58/13

Item no. 09121065685 - HT 296CH 21WW Item no. 09121065730 - HT 296SR 21WW Light colour: Luminosity: Electrical input: Power supply:

WARM WHITE K3600 110/32LUX at 0,5/1m (12,7V) 0,11 A - 1,4 W (12,7V) 10…15,2 V D.C.

RECESSED SPOT HT 42 TYPE Standard finishing: POLISHED CHROMED STEEL (CH) Dimensions: (mm) Ø 42 x h 18 Hole / Built in thickness: (mm) Ø 32/12

Item no. 09109011795 - HT 42CH 9NW Light colour: Luminosity: Electrical input: Power supply:

NEUTRAL WHITE K5000 158/52LUX at 0,5/1m (12,7V) 0,04A - 0,5W (12,7V) 10…14,4 V D.C.

9LEDs SUPER BRIGHT BLUE version Item no. 09300906003 - HT 42CH 9BLUE


23 RECESSED SPOTLIGHT ST 125 TYPE Standard finishing:

POLISHED CHROMED STEEL (CH) o Item no. GRAY RAL7035 (SR) Dimensions: (mm) Ø 68 x h 22 Hole / Built in thickness: (mm) Ø 58/18

Item no. 11121065638 - ST 125CH 21WW Item no. 11121065729 - ST 125SR 21WW Light colour: Luminosity: Electrical input: Power supply:

WARM WHITE K3600 110/32LUX at 0,5/1m (12,7V) 0,11 A - 1,4 W (12,7V) 10…15,2 V D.C.

Item no. 11112011171 - ST 125CH 12NW Item no. 11112011571 - ST 125SR 12NW Light colour: Luminosity: Electrical input: Power supply: .

NEUTRAL WHITE K5000 210/69LUX at 0,5/1m (12,7V) 0,06A - 0,8W (12,7V) 10…14,4 V D.C.

12LEDs SUPER BRIGHT BLUE version Item no. 11301206001 - ST 125CH 12BLUE Item no. 11301206002 - ST 125SR 12BLUE

Item no. 11121011174 - ST 125CH 21NW Item no. 11121011572 - ST 125SR 21NW Light colour: Luminosity: Electrical input: Power supply:

Only body for G4 module Item no. 90100201005 ELC 125CH Item no. 90100202006 ELC 125SR

NEUTRAL WHITE K5000 370/104 LUX at 0,5/1m (12,7V) 0,10A - 1,3W (12,7V) 10…14,4 V D.C.

Examples


RANGE

SURFACE MOUNT SPOT LIGHTS

Compared to the built-in spotlights, these have a base that can be fitted easily on the surface without any need of drilling to enter the spot. The base is also complete of switch.With these spotlights we bring standard lights in use in leisure vehicles up-to-date with LED technology. Some models are available with different type of lights. For a diffused light beam with WARM WHITE colour we propose the SMD range. For a semi-diffused light beam with NEUTRAL WHITE colour we propose the SUPER BRIGHT range. Last but not least, we also give the possibility of a total customization by supplying only the body to which you can couple the most proper light by choosing from our range of G4 modules.

SPOTLIGHT WITH SWITCH ST 403 TYPE Standard finishing: Dimensions:

POLISHED CHROMED STEEL (CH) (mm) Ø 100 x h 35

Item no. 11421065720 - ST 403CH 21WW Light colour: Luminosity: Electrical input: Power supply:

WARM WHITE K3600 101/29LUX at 0,5/1m (12,7V) 0,11 A - 1,4 W (12,7V) 10…15,2 V D.C.

Item no. 11201203019 - ST 403CH 12WW Light colour: Luminosity: Electrical input: Power supply:

WARM WHITE K3600 69/19LUX at 0,5/1m (12,7V) 0,06 A - 0,8 W (12,7V) 10…15,2 V D.C.

Only body for G4 module Item no. 90350501026 ELC 403CH

Examples


ADJISTABLE SPOTLIGHT WITH SWITCH ST 284 TYPE Standard finishing: Dimensions:

POLISHED CHROMED STEEL (CH) o Item no. GRAY RAL7035 (SR) (mm) Ø 100 x h 35

Item no. 11321065632 - ST 284CH 21WW Item no. 11321065633 - ST 284SR 21WW Light colour: Luminosity: Electrical input: Power supply:

WARM WHITEO K3600 126/36LUX at 0,5/1m (12,7V) 0,11 A - 1,4 W (12,7V) 10…15,2 V D.C.

Item no. 11201203017 - ST 284CH 12WW Item no. 11201203018 - ST 284SR 12WW Light colour: Luminosity: Electrical input: Power supply:

WARM WHITE K3600 84/23LUX at 0,5/1m (12,7V) 0,06 A - 0,8 W (12,7V) 10…15,2 V D.C.

Item no. 11312011183 - ST 284CH 12NW Item no. 11312011568 - ST 284SR 12NW Light colour: Luminosity: Electrical input: Power supply:

NEUTRAL WHITE K5000 210/69LUX at 0,5/1m (12,7V) 0,06A - 0,8W (12,7V) 10…14,4 V D.C.

Only body for G4 module Item no. 90300201001 ELC 284CH Item no. 90300202002 ELC 284SR

Examples

25


RANGE

SURFACE MOUNT SPOT LIGHTS SPOTLIGHT WITH SWITCH ST 409 TYPE Standard finishing: Dimensions:

POLISHED CHROMED STEEL (CH) o Item no. GRAY RAL7035 (SR) (mm) Ø 100 x h 35

Item no. 11421065651 - ST 409CH 21WW Item no. 11421065731 - ST 409SR 21WW Light colour: Luminosity: Electrical input: Power supply:

WARM WHITE K3600 101/29LUX at 0,5/1m (12,7V) 0,11 A - 1,4 W (12,7V) 10…15,2 V D.C.

Item no. 11421011180 - ST 409CH 21NW Item no. 11421011569 - ST 409SR 21NW Light colour: Luminosity: Electrical input: Power supply:

NEUTRAL WHITE K5000 370/104 LUX at 0,5/1m (12,7V) 0,10A - 1,3W (12,7V) 10…14,4 V D.C.

Item no. 11301202008 - ST 409CH 12NW Item no. 11301202009 - ST 409SR 12NW Light colour: Luminosity: Electrical input: Power supply:

Only body for G4 module Item no. 90350501024 ELC 409CH Item no. 90350531025 ELC 409SR

Examples

NEUTRAL WHITE K5000 210/69LUX at 0,5/1m (12,7V) 0,06A - 0,8W (12,7V) 10…14,4 V D.C.


THE BEST WAY

TO KEEP UP TO DATE www.tecnoled.it


TECNOLED ATMOSPHERES


29


RANGE MICRO SPOT LIGHTS This range of very small spot lights with one SUPER BRIGHT LED emit a discrete light , giving an agreeable look to the different ambiences at night time and creating a very nice secondary lighting. They can be fitted above the floor and used as "directional lights", inside see-through cabinets to display glasses and create a fascinating play of light…No application limits for these spots but the user's creativity!

ROUND SINGLE STEP LIGHT IN BRASS Standard finishing: POLISHED CHROMED STEEL (CH) Dimensions: (mm) Ø 15 x h 22 Hole / Built in thickness: (mm) Ø 10/25

Item no. 09101061295 - HT 10CH 1WW Item no. 09101011201 - HT 10CH 1NW Item no. 09101092224 - HT 10CH 1BLUE Light colour: Electrical input Power supply:

WARM WHITE K3600 NEUTRAL WHITE K5000 - BLUE 0,016 A - 0,2 W (12,7V) 10…14,4 V D.C.

SQUARED SINGLE STEP LIGHT IN BRASS Standard finishing: POLISHED CHROMED STEEL (CH) Dimensions: (mm) Ø 20 x h 20 Hole / Built in thickness: (mm) Ø 12/20

Item no. 09300103005 - HT 2020CH 1WW Item no. 09300102004 - HT 2020CH 1NW Item no. 09101091770 - HT 2020CH 1BLUE Light colour: Electrical input Power supply:

WARM WHITE K3600 NEUTRAL WHITE K5000 - BLUE 0,016 A - 0,2 W (12,7V) 10…14,4 V D.C.


ROUND SINGLE STEP LIGHT IN ABS Standard finishing: POLISHED CHROMED STEEL (CH) Dimensions: (mm) Ø 22 x h 22 Hole / Built in thickness: (mm) Ø 19/15

Item no. 09300103008 - HT 22CH 1WW Item no. 09101011806 - HT 22CH 1NW Item no. 09101091805 - HT 22CH 1BLUE Light colour: Electrical input Power supply:

WARM WHITE K3600 NEUTRAL WHITE K5000 - BLUE 0,016 A - 0,2 W (12,7V) 10…14,4 V D.C.

RECTANGULAR SINGLE STEP LIGHT IN ABS Standard finishing: POLISHED CHROMED STEEL (CH) Dimensions: (mm) Ø 30 x h 20 Hole / Built in thickness: (mm) Ø 27 x 17/15

Item no. 09300103006 - HT 3020CH 1WW Item no. 09300102007 - HT 3020CH 1NW Item no. 09101091772 - HT 3020CH 1BLUE Light colour: Electrical input Power supply:

WARM WHITE K3600 NEUTRAL WHITE K5000 - BLUE 0,016 A - 0,2 W (12,7V) 10…14,4 V D.C.

31


RANGE LINEAR LIGHTS The linear lights are designed principally for under cabinet lighting. They are available in different versions, depending on the type of light; for a diffused light beam with WARM WHITE colour we propose the SMD range, for a semi-diffused light beam with NEUTRAL WHITE colour we propose the SUPER BRIGHT range.

ALUMINIUM LINEARSPOTS WITH DIFFUSED LIGHT BEAM WARM WHITE (WW) OR COLD WHITE (CW) Satinized aluminium body with polycarbonate cover. Abs end caps. Switch included.

Item no. 03204803023 - LNRI-AL-E 48P8WW Item no. 03204801024 - LNRI-AL-E 48P8CW Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Standard finishing: Dimensions:

WARM WHITE K3200…3600 124/40LUX at 0,5/1m (12,7V) COLD WHITE K5500…6500 143/45LUX at 0,5/1m (12,7V) 0,24A - 3,0W (12,7V) 10…15,2V D.C. MATT GRAY (mm) 480 x 20 x 12

Item no. 03209603025 - LNRI-AL-E 96P8WW Item no. 03209601026 - LNRI-AL-E 96P8CW Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Standard finishing: Dimensions:

WARM WHITE K3200…3600 161/52LUX at 0,5/1m (12,7V) COLD WHITE K5500…6500 186/58LUX at 0,5/1m (12,7V) 0,48A - 6,0W (12,7V) 10…15,2V D.C. MATT GRAY (mm) 930 x 20 x 12


PIPE SHAPE LINEARSPOTS WITH DIFFUSED LIGHT BEAM WARM WHITE (WW) OR COLD WHITE (CW) Pipe shape see-trough ribbed plexiglass central body for a better light beam diffusion. Chromed glossy stainless steel end caps. Fixing clips with possibility to adjust light direction. Switch included.

Item no. 03201503017 - LNRI-P 15P16WW Item no. 03201501018 - LNRI-P 15P16CW Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Standard finishing: Dimensions:

WARM WHITE K3200…3600 290/95LUX at 0,5/1m COLD WHITE K5500…6500 340/100LUX at 0,5/1m 0,28A - 3,5W (12,7V) 10…15,2V D.C. POLISHED CHROMED STEEL (mm) Diam. 25 x 330

Item no. 03203003019 - LNRI-P 30P16WW Item no. 03203001020 - LNRI-P 30P16CW Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Standard finishing: Dimensions:

WARM WHITE K3200…3600 580/200LUX at 0,5/1m COLD WHITE K5500…6500 670/230LUX at 0,5/1m 0,56A - 7,1W (12,7V) 10…15,2V D.C. POLISHED CHROMED STEEL (mm) Diam. 25 x 580

Item no. 03204803021 - LNRI-P 48P16WW Item no. 03204801022 - LNRI-P 48P16CW Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Standard finishing: Dimensions:

WARM WHITE K3200…3600 690/230LUX at 0,5/1m COLD WHITE K5500…6500 790/270LUX at 0,5/1m 0,90A - 11,5W (12,7V) 10…15,2V D.C. POLISHED CHROMED STEEL (mm) Diam. 25 x 880

33


RANGE LINEAR LIGHTS PLEXY LINEARSPOTS WITH DIFFUSED LIGHT BEAM WARM WHITE (WW) OR COLD WHITE (CW) Aluminium base and mirrored plexiglass cover with see-trough cut for light beam. Switch included.

Item no. 10200603020 - PLX LNRI 6P16WW Item no. 10200601021 - PLX LNRI 6P16CW Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Standard finishing: Dimensions:

WARM WHITE K3200…3600 112/35LUX at 0,5/1m COLD WHITE K5500…6500 125/39LUX at 0,5/1m 0,11A - 1,4W (12,7V) 10…15,2V D.C. MIRRORED CHROMED (mm) 200 x 40 x h 10

Item no. 10202403022 - PLX LNRI 24P16WW Item no. 10202401023 - PLX LNRI 24P16CW Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Standard finishing: Dimensions:

WARM WHITE K3200…3600 280/87LUX at 0,5/1m COLD WHITE K5500…6500 310/97LUX at 0,5/1m 0,44A - 5,6W (12,7V) 10…15,2V D.C. MIRRORED CHROMED (mm) 485 x 40 x h 10


PLEXY LINEARSPOTS WITH DIFFUSED LIGHT BEAM WARM WHITE (WW) OR COLD WHITE (CW) Mirrored plexiglass base and satinized cover. Switch included.

Item no. 10201203009 - PXL LNRI 12P8WW Item no. 10201201011 - PXL LNRI 12P8CW Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Standard finishing: Dimensions:

WARM WHITE K3200…3600 52/16LUX at 0,5/1m COLD WHITE K5500…6500 55/17LUX at 0,5/1m 0,06A - 0,8W (12,7V) 10…15,2V D.C. MIRRORED CHROMED (mm) 165 x 30 X h 6

Item no. 10202403018 - PXL LNRI 24P8WW Item no. 10202401019 - PXL LNRI 24P8CW Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Standard finishing: Dimensions:

WARM WHITE K3200…3600 106/32LUX at 0,5/1m COLD WHITE K5500…6500 110/34LUX at 0,5/1m 0,12A - 1,6W (12,7V) 10…15,2V D.C. MIRRORED CHROMED (mm) 265 x 30 X h 6

35


RANGE LINEAR LIGHTS PIPE SHAPE LINEARSPOTS WITH DIFFUSED LIGHT BEAM WARM WHITE (WW) OR COLD WHITE (CW) See-trough plexiglass pipe shape body with satinized grey internal finishing, rubber end caps. Fixing clips with possibility to adjust light direction. Switch included.

Item no. 03112011058 - LNRI-P 12P10NW Light colour: Luminosity: Electrical input: Power supply: Standard finishing: Dimensions:

NEUTRAL WHITE K5000 177/46LUX at 0,5/1m (12,7V) 0,06A - 0,8W (12,7V) 10…14,4V D.C. MATT GRAY (mm) Ø 24 x 185

Item no. 03124011061 - LNRI-P 24P10NW Light colour: Luminosity: Electrical input: Power supply: Standard finishing: Dimensions:

NEUTRAL WHITE K5000 300/84LUX at 0,5/1m (12,7V) 0,13A - 1,7W (12,7V) 10…14,4V D.C. MATT GRAY (mm) Ø 24 x 305

Item no. 03148011498 - LNRI-P 48P10NW Light colour: Luminosity: Electrical input: Power supply: Standard finishing: Dimensions:

NEUTRAL WHITE K5000 512/170LUX at 0,5/1m (12,7V) 0,26A - 3,4W (12,7V) 10…14,4V D.C. MATT GRAY (mm) Ø 24 x 600

The version with 48LEDs has 2 switches that light up 24leds each.


REMOVABLE PIPE SHAPE LINEAR LAMP WITH SEMI-DIFFUSED LIGHT BEAM NEUTRAL WHITE COLOUR FOR GARAGE APPLICATION See-trough plexiglass pipe shape body with satinized grey internal finishing, rubber end caps. Fixing clips with possibility to adjust light direction. Switch included. Power supply coiled cable to facilitate lamp use once removed from holding clips.

Item no. 03124011810 - LNRI-PG 24P10NW Light colour: Luminosity: Electrical input: Power supply: Standard finishing: Dimensions:

NEUTRAL WHITE K5000 300/84LUX at 0,5/1m (12,7V) 0,13A - 1,7W (12,7V) 10…14,4V D.C. MATT GRAY (mm) Ø 24 x 305

37


RANGE FLEXIBLE SPOTLIGHTS Characteristic of this range of lights is a flexible arm (FLEX), or a pivoting arm (SND). Particularly suitable where the direction of the light is of primary importance to create comfort either in the living or sleeping area. It is possible to choose from a wide range of models from modern to traditional to essential. The luminosity changes according to the type of LED used; for a diffused light beam with WARM WHITE colour we propose the SMD range, for a semi-diffused light beam with NEUTRAL WHITE colour we propose the SUPER BRIGHT range (more indicated for reading).

EXTERNAL FLEXIBLE SPOTLIGHT HT FLEX TYPE Standard finishing:

POLISHED CHROMED STEEL (CH)

Item no. 09206011546 - HT FLEX 6NW Recommended application: READING LIGHT Light colour: NEUTRAL WHITE K5000 Luminosity: 120/40LUX at 0,5/1m (12,7V) Electrical input: 0,03A - 0,3W (12,7V) Power supply: 10…14,4V D.C. Dimensions: (mm) Ø 50 x h 150 - length of the flexible part 100

Item no. 09209011197 - HT FLEX 9NW Recommended application: READING LIGHT Light colour: NEUTRAL WHITE K5000 Luminosity: 158/52LUX at 0,5/1m (12,7V) Electrical input: 0,04A - 0,5W (12,7V) Power supply: 10…14,4V D.C. Dimensions: (mm) Ø 50 x h 150 - length of the flexible part 100


Item no. 09212011132 - HT FLEX 12NW Recommended application: READING LIGHT Light colour: NEUTRAL WHITE K5000 Luminosity: 201/69LUX at 0,5/1m (12,7V) Electrical input: 0,06A - 0,8W (12,7V) Power supply: 10…14,4V D.C. Dimensions: (mm) Ø 50 x h 143 - length of the flexible part 100

Item no. 09221011129 - HT FLEX 21NW Recommended application: READING LIGHT FOR UNDER CABINET APPLICATION IN DINETTE AREA Light colour: NEUTRAL WHITE K5000 Luminosity: 370/104LUX at 0,5/1m (12,7V) Electrical input: 0,10A - 1,3W (12,7V) Power supply: 10…14,4V D.C. Dimensions: (mm) Ø 50 x h h143 - length of the flexible part 100

Item no. 09212065725 - HT FLEX 12WW Recommended application: READING LIGHT Light colour: WARM WHITE K3600 Luminosity: 72/20 LUX at 0,5/1m (12,7V) Electrical input: 0,06A - 0,8W (12,7V) Power supply: 10…15,2V D.C. Dimensions: (mm) Ø 50 x h 143 - length of the flexible part 100

Item no. 09221065624 - HT FLEX 21WW Recommended application: READING LIGHT FOR UNDER CABINET APPLICATION IN DINETTE AREA Light colour: WARM WHITE K3600 Luminosity: 126/36 LUX at 0,5/1m (12,7V) Electrical input: 0,11A - 1,4W (12,7V) Power supply: 10…15,2V D.C. Dimensions: (mm) Ø 50 x h 143 - length of the flexible part 100

39


RANGE FLEXIBLE SPOTLIGHTS EXTERNAL SPOTLIGHT WITH PIVOT ARM HT SND TYPE Standard finishing:

POLISHED CHROMED STEEL (CH)

Item no. 09306011602 - HT SND 6NW Recommended application: READING LIGHT Light colour: NEUTRAL WHITE K5000 Luminosity: 120/40LUX at 0,5/1m (12,7V) Electrical input: 0,03A - 0,3W (12,7V) Power supply: 10…14,4V D.C. Dimensions: (mm) Ø 50 x h 90 - height of the pivot arm 40

Item no. 09309011609 - HT SND 9NW Recommended application: READING LIGHT Light colour: NEUTRAL WHITE K5000 Luminosity: 158/52LUX at 0,5/1m (12,7V) Electrical input: 0,04A - 0,5W (12,7V) Power supply: 10…14,4V D.C. Dimensions: (mm) Ø 50 x h 90 - height of the pivot arm 40

Item no. 09312011138 - HT SND 12NW Recommended application: READING LIGHT Light colour: NEUTRAL WHITE K5000 Luminosity: 201/69LUX at 0,5/1m (12,7V) Electrical input: 0,06A - 0,8W (12,7V) Power supply: 10…14,4V D.C. Dimensions: (mm) Ø 50 x h 90 - height of the pivot arm 40

Item no. 09321011135 - HT SND 21NW Recommended application: READING LIGHT FOR UNDER CABINET APPLICATION IN DINETTE AREA Light colour: NEUTRAL WHITE K5000 Luminosity: 370/104LUX at 0,5/1m (12,7V) Electrical input: 0,10A - 1,3W (12,7V) Power supply: 10…14,4V D.C. Dimensions: (mm) Ø 143 x h 90 - height of the pivot arm 40


Item no. 09312065701 - HT SND 12WW Recommended application: READING LIGHT Light colour: WARM WHITE K3600 Luminosity: 72/20 LUX at 0,5/1m (12,7V) Electrical input: 0,06A - 0,8W (12,7V) Power supply: 10…15,2V D.C. Dimensions: (mm) Ø 143 x h 90 - height of the pivot arm 40

Item no. 09321065625 - HT SND 21WW Recommended application: READING LIGHT FOR UNDER CABINET APPLICATION IN DINETTE AREA Light colour: WARM WHITE K3600 Luminosity: 126/36 LUX at 0,5/1m (12,7V) Electrical input: 0,11A - 1,4W (12,7V) Power supply: 10…15,2V D.C. Dimensions: (mm) Ø 143 x h 90 - height of the pivot arm 40

EXTERNAL SPOTLIGHT WITH PIVOT ARM ST TYPE Standard finishing:

SATINIZED NICHEL

With these reading lights with pivoting arm we repropose what is mostly used on leisure vehicles. There are 3 models available and each of them can be coupled with the different types of dichroic lamps MR16, MR11 or with the vertical connection module with 360° diffused light beam for the following applications: reading light, primary lighting or wall lamp. Item no. 90400207002 - ST 854NM Dimensions: (mm) Ø 80 x h 120 - height of the pivot arm 40

Item no. 90400207001 - ST 862NM Dimensions: (mm) Ø 80 x h 120 - height of the pivot arm 40

Item no. 90400207003 - ST 8015NM Dimensions: (mm) Ø 80 x h 120 - height of the pivot arm 40

Examples

41


RANGE PLEXY CEILING LAMPS With its creativity, Tecnoled has been the pioneer proposing the union of Leds and plexyglass in the leisure market. Plexiglass is very see-trough, even more than glass. With the light beam generated by Leds coupled with plexyglass was born the most complete range of ceiling lamps available in the market that confirmed their success also this year. A timeless success which is continuously confirmed by the evolution of the design and the study of customized solutions. We offer different designs which uses different type of matachrilate; mirror-like, satinized, opaline, see-trough together with the best Led technology; super bright, smd, power.

Celing lamps with mirrored base and see-trough cover. 21 Super Bright LEDs for a semi-diffused light beam. Avaialble only in NW NEUTRAL WHITE colour and with or without switch.

Item no. 10221011484 - PLX OVL-I 150 21NW Dimensions:

(mm) 150 x 80 x h 20

Item no. 10121011482 - PLX DSC 80 21NW Dimensions:

(mm) Diam. 80 x h 20

Item no. 10521011549 - PLX RTG-I 150 21NW Dimensions:

(mm) 150 x 80 x h 20

Item no. 10521011512 - PLX QDT 80 21NW Dimensions:

Light colour: Luminosity: Electrical input: Power supply: Standard finishing:

(mm) 80 x 80 x h 20

NEUTRAL WHITE K5000 370/104LUX at 0,5/1m (12,7V) 0,10A - 1,3W (12,7V) 10‌14,4V D.C. PLEXIGLAS WITH MIRROR CHROMED + TRANSPARENT


43

Celing lamps with mirrored base and see-trough cover. 60 Super Bright LEDs for a semi-diffused light beam. Versions availble; MIX with neutral white + warm white multileds for a very powerfull luminosity or WARM WHITE or NW NEUTRAL WHITE. Complete of switch as standard (-I version).

Item no. 10360101560 - PLX ELS-I 220 60MIX Item no. 10360011558 - PLX ELS-I 220 60NW Dimensions:

(mm) 220 x 115 x h 20

Item no. 10460101550 - PLX RTG-I 220 60MIX Item no. 10460011603 - PLX RTG-I 220 60NW Dimensions:

Light colour:

(mm) 220 x 115 x h 20

(MIX) WARM WHITE K3600 (NW) NEUTRAL WHITE K5000 Luminosity: (MIX) 580/160LUX at 0,5/1m (12,7V) (NW) 992/282LUX at 0,5/1m (12,7V) Electrical input: 0,30A - 3,8W (12,7V) Power supply: 10‌14,4V D.C. Standard finishing: PLEXIGLAS WITH MIRROR CHROMED + TRANSPARENT


RANGE PLEXY CEILING LAMPS Celing lamps with mirrored base and see-trough cover. 60 SMD LEDs for a diffused light beam. Avaialble colour WW WARM WHITE. Complete of switch as standard (-I version).

Item no. 10363065671 - PLX ELS-I 220 63WW Dimensions:

(mm) 220 x 115 x h 20

Item no. 10206303004 - PLX DSCS-I 210 63WW Dimensions: Light colour: Luminosity: Electrical input: Power supply: Standard finishing:

(mm) D. 210 x h 20 WARM WHITE K3600 195/59LUX at 0,5/1m (12,7V) 0,30A - 3,8W (12,7V) 10…15,2V D.C. PLEXIGLAS WITH MIRROR CHROMED + TRANSPARENT

Celing lamps with mirrored base and see-trough cover. 21 SMD LEDs for a diffused light beam. Avaialble colour WW WARM WHITE. With or not switch.

Item no. 10321065673 - PLX ELS-I 150 21WW Dimensions:

(mm) 150 x 80 x h 20

Item no. 10121065732 - PLX DSC 80 21WW Dimensions: Light colour: Luminosity: Electrical input: Power supply: Standard finishing:

(mm) Ø 80 x h 20 WARM WHITE K3600 101/29LUX at 0,5/1m (12,7V) 0,10A - 1,3W (12,7V) 10…15,2V D.C. PLEXIGLAS WITH MIRROR CHROMED + TRANSPARENT


Celing lamps with monosatinized + opaline cover. 3 Power LEDs for a diffused light beam available in WARM WHITE or NW NEUTRAL WHITE. These models have been designed in order to improove the luminosity performance of the 3 power leds module, maintaining a diffused light beam at the same time. The standard version is provided with power regulator (- RL version). With this device it is possible to adjust the luminous intensity and save on the power intake. This is possible thanks to the use of a suitable electronic circuit that has been designed in order not to waste the energy that is not used as happens with obsolete power regulators.

Item no. 10100303037 - PLX ELS-RL 340DS 3WW Item no. 10100302038 - PLX ELS-RL 340DS 3NW Dimensions: (mm) 340 x 126 x h 25

Item no. 10100303039 - PLX RTG-RL 340DS 3WW Item no. 10100302040 - PLX RTG-RL 340DS 3NW Dimensions: (mm) 340 x 126 x h 25

Item no. 10100303041 - PLX DSC-RL 195DS 3WW Item no. 10100302042 - PLX DSC-RL 195DS 3NW Dimensions: (mm) Ø 195 x h 25

Item no. 10100303043 - PLX SELS-RL 300DS 3WW Item no. 10100302044 - PLX SELS-RL 300 DS 3NW Dimensions: (mm) 300 x 140 x h 25

Item no. 10100303045 - PLX RTG-RL 470DS 3WW Item no. 10100302046 - PLX RTG-RL 470DS 3NW Dimensions: (mm) 470 x 80 h 25 Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Standard finishing: Table of the electric intake consequently to the adjusted luminosity:

WARM WHITE K3600 508/158LUX at 0,5/1m NEUTRAL WHITE K5000 660/205LUX a 0,5/1m 0,39A - 4,9W (12,7V) 7…30V D.C. OPALINE PLEXIGLAS + MATT

100% lux = 0,39A 75% lux = 0,24A 50% lux = 0,15A 25% lux = 0,06A

45


RANGE PLEXY CEILING LAMPS Celing lamps with opaline cover. 3 Power LEDs for a diffused light beam available in WARM WHITE or NW NEUTRAL WHITE. Complete of switch as standard (-I version).

Item no. 10100303001 - PLX ELS-I 340 3WW Item no. 10100302007 - PLX ELS-I 340 3NW Dimensions:

(mm) 340 x 126 x h 20

Item no. 10100303033 - PLX RTG-I 340 3WW Item no. 10100302034 - PLX RTG-I 340 3NW Dimensions:

(mm) 340 x 126 x h 20

Item no. 10100303005 - PLX DSC-I 195 3WW Item no. 10100302006 - PLX DSC-I 195 3NW Dimensions:

(mm) Ø 195 x h 20

Item no. 10100303026 - PLX SELS-I 300 3WW Item no. 10100302035 - PLX SELS-I 300 3NW Dimensions:

(mm) 300 x 140 x h 20

Item no. 10100303025 - PLX RTG-I 470 3WW Item no. 10100302036 - PLX RTG-I 470 3NW Dimensions: Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Standard finishing:

(mm) 470 x 80 h 20 WARM WHITE K3600 389/108LUX at 0,5/1m NEUTRAL WHITE K5000 505/140LUX a 0,5/1m 0,39A - 4,9W (12,7V) 7…30V D.C. OPALINE PLEXIGLAS


Celing lamps with mirrored + monosatinized cover. 3 Power LEDs for a diffused light beam available in WW WARM WHITE or NW NEUTRAL WHITE. The standard version is provided with power regulator (- RL version). With this device it is possible to adjust the luminous intensity and save on the power intake. This is possible thanks to the use of a suitable electronic circuit that has been designed in order not to waste the energy that is not used as happens with obsolete power regulators.

Item no. 10100303047 - PLX ELS-RL 340X 3WW Item no. 10100302048 - PLX ELS-RL 340X 3NW Dimensions:

(mm) 340 x 126 x h 25

Item no. 10100303049 - PLX RTG-RL 340X 3WW Item no. 10100302050 - PLX RTG-RL 340X 3NW Dimensions:

(mm) 340 x 126 x h 25

Item no. 10100303051 - PLX DSC-RL 195X 3WW Item no. 10100302052 - PLX DSC-RL 195X 3NW Dimensions:

(mm) Ø 195 x h 25

Item no. 10100303053 - PLX SELS-RL 300X 3WW Item no. 10100302054 - PLX SELS-RL 300X 3NW Dimensions:

(mm) 300 x 140 x h 25

Item no. 10100303055 - PLX RTG-RL 470X 3WW Item no. 10100302056 - PLX RTG-RL 470X 3NW Dimensions: Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Standard finishing:

(mm) 470 x 80 h 25 WARM WHITE K3600 508/158LUX at 0,5/1m NEUTRAL WHITE K5000 660/205LUX at 0,5/1m 0,39A - 4,9W (12,7V) 7…30V D.C. PLEXIGLAS WITH MIRROR CHROMED + MATT

Table of the electric intake consequently to the adjusted luminosity:

100% lux = 0,39A 75% lux = 0,24A 50% lux = 0,15A 25% lux = 0,06A

47


RANGE PLEXY CEILING LAMPS Ceiling lamps with see-through base + mirrored cover + monosatinized cover and double lighting. Primary lighting: 3 Power LEDs with diffused light beam available in WW WARM WHITE or NW NEUTRAL WHITE. Secondary lighting: SMD LEDs available in WW WARM WHITE with light coming out laterally from the base thickness. Complete of 1-0-2 switch (-I version).

Item no. 10100303057 - PLX ELS-I 370SX 3WW Item no. 10100302058 - PLX ELS-I 370SX 3NW With secondary lighting Electrical input: Power supply: Dimensions:

0,16A - 2,0W (12,7V) 7…15,2V D.C. (mm) 370 x 176 x h 25

Item no. 10100303059 - PLX RTG-I 370SX 3WW Item no. 10100302060 - PLX RTG-I 370SX 3NW With secondary lighting Electrical input: Power supply: Dimensions:

0,21A - 2,7W (12,7V) 7…15,2V D.C. (mm) 370 x 150 x h 25

Item no. 10100303061 - PLX DSC-I 250SX 3WW Item no. 10100302062 - PLX DSC-I 250SX 3NW With secondary lighting Electrical input: Power supply: Dimensions:

0,14A - 1,7W (12,7V) 7…15,2V D.C. (mm) Ø 250 x h 25


49

Item no. 10100303063 - PLX SELS-I 330SX 3WW Item no. 10100302064 - PLX SELS-I 330SX 3NW With secondary lighting Electrical input: Power supply: Dimensions:

0,10A - 1,3W (12,7V) 7…15,2V D.C. (mm) 330 x 155 x h 25

Item no. 10100303065 - PLX RTG-I 500SX 3WW Item no. 10100302066 - PLX RTG-I 500SX 3NW With secondary lighting Electrical input: Power supply: Dimensions:

0,13A - 1,6W (12,7V) 7…15,2V D.C. (mm) 500 x 95 h 25

MAIN LIGHTING: Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Standard finishing:

WARM WHITE K3600 508/158LUX at 0,5/1m NEUTRAL WHITE K5000 660/205LUX at 0,5/1m 0,39A - 4,9W (12,7V) 7…15,2V D.C. PLEXIGLAS WITH MIRROR CHROMED + MATT


RANGE PLEXY CEILING LAMPS With the new linear Ultra-Power LED we have designed a range of ceiling lamps of reduced dimensions yet very powerful, with a diffused light beam available in WW WARM WHITE or CW COLD WHITE. Screen is available in opalin plexiglass, mirrored and monosatinized. Complete of switch as standard (-I version).

Item no. 10100103031 - PLX ELS-I 200 L1WW Item no. 10100101067 - PLX ELS-I 200 L1CW Dimensions:

(mm) 200 x 80 x h 20

Item no. 10100103068 - PLX RTG-I 200 L1WW Item no. 10100101069 - PLX RTG-I 200 L1CW Dimensions: Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Standard finishing:

(mm) 200 x 80 x h 20 WARM WHITE K3200…3600 330/96LUX at 0,5/1m COLD WHITE K5500…6500 370/110LUX at 0,5/1m 0,42A - 5,3W (12,7V) 7…30,0V D.C. OPALINE PLEXIGLAS

Item no. 10100103070 - PLX ELS-I 200X L1WW Item no. 10100101071- PLX ELS-I 200X L1CW Dimensions:

(mm) 200 x 80 x h 25

Item no. 10100103072 - PLX RTG-I 200X L1WW Item no. 10100101073 - PLX RTG-I 200X L1CW Dimensions: Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Standard finishing:

(mm) 200 x 80 x h 25 WARM WHITE K3200…3600 380/108LUX at 0,5/1m COLD WHITE K5500…6500 410/120LUX at 0,5/1m 0,42A - 5,3W (12,7V) 7…30,0V D.C. PLEXIGLAS WITH MIRROR CHROMED + MATT


The PLEXY range is completed by wall lamps conceived for the sleeping room lighting or for secondary lighting in other areas of the cabin. The type of LEDs used are SMD available in WW WARM WHITE.

Models with lateral light emission 360° Item no. 10201803024 - PLX AE-I 160 18WW Dimensions:

(mm) 160 x 100 x h 16

Item no. 10201803025 - PLX AQ-I 100 18WW Dimensions:

(mm) 100 x 100 x h 16

Item no. 10201803026 - PLX AD-I 100 18WW Dimensions:

(mm) Ø 100 x h 16

Item no. 10201803029 - PLX ADB-I 75 18WW Dimensions: Light colour: Electrical input: Power supply: Standard finishing:

(mm) Ø 75 x h 13 WARM WHITE K3200…3600 0,12A - 1,5W (12,7V) 7…15,2V D.C. PLEXIGLAS WITH MIRROR CHROMED + MATT

Examples for versions without switch

Models with frontal light emission Item no. 10201203027 - PLX ARF-I 60 12WW Dimensions:

(mm) 60 x 110 x 30

Item no. 10201203028 - PLX ARF-I 80 12WW Dimensions: Light colour: Luminosity: Electrical input: Power supply:

(mm) 80 x 110 x 30 WARM WHITE K3200…3600 77/21 LUX at 0,5/1m (12,7) 0,07A - 0,9W (12,7V) 10…15,2V D.C.

51


RANGE BASIC MODULES These are the multileds modules that we fit inside our design lights; with SMD Leds for a diffused light with WARM WHITE colour, with SUPER BRIGHT Leds for a semi-diffused light with NEUTRAL WHITE colour. There are different types available and each of them can be further used for customized solutions like rounded modules, linear modules, squared modules, linear flexible modules available in coils.

6 LEDS SUPER BRIGHT MODULE Item no. 01300602006 - 25.6RNW Light colour: Luminosity: Electrical input: Power supply: Dimensions:

NEUTRAL WHITE K5000 80/27LUX at 0,5/1m (12,7V) 0,03A - 0,3W (12,7V) 10…14,4 V D.C. (mm) Ø 25 x h 11

9 LEDS SUPER BRIGHT MODULE Item no. 01109011002 - 26.9RNW Light colour: Luminosity: Electrical input: Power supply: Dimensions:

NEUTRAL WHITE K5000 120/40 LUX at 0,5/1m (12,7V) 0,04 A - 0,5 W (12,7V) 10…14,4 V D.C. (mm) Ø 25 x h 11

9LEDs SUPER BRIGHT BLUE VERSION Item no. 01109091438 - 26.9R BLUE

12 LEDS SUPER BRIGHT MODULE Item no. 01212011009 - 30.12RNW Light colour: Luminosity: Electrical input: Power supply: Dimensions:

NEUTRAL WHITE K5000 177/46 LUX at 0,5/1m (12,7V) 0,06 A - 0,8 W (12,7V) 10…14,4 V D.C. (mm) Ø 34 x h 11

12LEDs SUPER BRIGHT BLUE VERSION Item no. 01212091616 - 30.12R BLUE


53 21 LEDS SUPER BRIGHT MODULE Item no. 01321011016 - 44.21RNW Light colour: Luminosity: Electrical input: Power supply: Dimensions:

NEUTRAL WHITE K5000 280/85 LUX at 0,5/1m (12,7V) 0,10 A - 1,3 W (12,7V) 10…14,4 V D.C. (mm) Ø 44 x h 11

12 OR 24 LEDS SUPER BRIGHT LINEAR MODULE WITH 10MM PITCH OF THE LEDS

Item no. 01412011019 - 12010.12R P10NW Light colour: Luminosity: Electrical input: Power supply: Dimensions:

NEUTRAL WHITE K5000 177/46 LUX at 0,5/1m (12,7V) 0,06 A - 0,8 W (12,7V) 10…14,4 V D.C. (mm) 120 x 9,8 x h 11

Item no. 01424011538 - 24010.24R P10NW Light colour: Luminosity: Electrical input: Power supply: Dimensions:

NEUTRAL WHITE K5000 300/84 LUX at 0,5/1m (12,7V) 0,13 A - 1,7 W (12,7V) 10…14,4 V D.C. (mm) 240 x 9,8 x h 11

Each 12 or 24 LEDs linear module can be electrically connected with more consecutive modules by means of specific welding holes.


RANGE BASIC MODULES 60 LEDS SUPER BRIGHT MODULE Item no.01460011437 - 12550.60RNW Item no.01460101693 - 12550.60RMIX Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Dimensions:

(NW)NEUTRAL WHITE K5000 992/282LUX at 0,5/1m (12,7V) (MIX) WARM WHITE K3600 580/160LUX at 0,5/1m (12,7V) 0,30A - 3,8W (12,7V) 10…14,4V D.C. (mm) 125 x 50 x h.10

(MIX) 36LEDs NEUTRAL WHITE + 24LEDs WARM WHITE

LINEAR MODULE 30 LEDS SUPER FLUX WITH 16MM PITCH OF THE LEDS Item no.01430065639 - LNR 30R P16 SFWW Applicazione consigliata: MAIN LIGHTING Light colour: WARM WHITE K3600 Luminosity: 200/64LUX at 0,5/1m (12,7V) Electrical input: 0,22A - 2,8W (12,7V) Power supply: 10…14,4V D.C. Finitura standard: WHITE PROFILE PVC Dimensions: (mm) 500 x 15 x h 13 This linear module is indicated for built in fittings into millings of 15 x 8 mm. It can be fixed either with double sided tape or by gluing it. Thanks to the resinated PCB body inside a PVC cover, this module is suitable to be used also in critical points like in the shower, under the cooker hood or outside. The electrical connection is made through a pair of cables fitted on its ends. It is possible to use just one pair of them or, if the module is cut into shorter segments along the line that is after every 3 LEDs, both segments will have their own pair of cables. (We recommend filling with some silicon the points were the module was cut).


55 21 LEDS SMD 3528 MODULE Item no.01521065716 - 40.21RWW Item no.01521065742 - 50.21RWW Light colour: Luminosity: Electrical input: Power supply: Dimensions:

WARM WHITE K3600 126/36LUX at 0,5/1m (12,7V) 0,11A - 1,4W (12,7V) 10…15,2 V D.C. (mm) Ø 40 o 50 x h 4

12 LEDS SMD 3528 MODULE Item no.01512065793 - 40.12RWW Light colour: Luminosity: Electrical input: Power supply: Dimensions:

WARM WHITE K3600 72/20LUX at 0,5/1m (12,7V) 0,06A - 0,8W (12,7V) 10…15,2 V D.C. (mm) Ø 40 x h 4


RANGE BASIC MODULES 3 LEDS POWER XP MODULE WARM WHITE (WW) OR NEUTRAL WHITE (NW) WITH POWER REGULATOR AND TERMINAL FOR DIMMER

Item no.01100303020 - 8080.3XPWW Item no.01100302021 - 8080.3XPNW Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Dimensions:

WARM WHITE K3600 389/108LUX at 0,5/1m NEUTRAL WHITE K5500 505/140LUX at 0,5/1m 0,39A - 4,9W (12,7V) 7…30V D.C. (mm) Ø 80 x h. 6

Item no.01100303022 - 24020.3XPWW Item no.01100302023 - 24020.3XPNW Light colour: Luminosity: Light colour: Luminosity: Electrical input: Power supply: Dimensions:

WARM WHITE K3600 389/108LUX at 0,5/1m NEUTRAL WHITE K5500 505/140LUX at 0,5/1m 0,39A - 4,9W (12,7V) 7…30V D.C. (mm) 240 x 20 x h. 6

These circuits are protected against the polar inversion; therefore it is not necessary to pay attention to the correct wiring of the two poles. We advise to apply these modules on metal superficial for the corrected heat dissipation.


FLEXIBLE LINEAR MODULE 60 LEDS SMD 3528 WITH 16MM PITCH OF THE LEDS, FOR MAIN LIGHTING TO BE BUILT-IN, WARM WHITE (WW), COLD WHITE (CW) AND BLUE

Item no.01606065698 - 1000.60 3528 P16WW Item no.01606001054 - 1000.60 3528 P16CW Item no.01606006053 - 1000.60 3528 P16BLUE Light colour: Electrical input: Power supply: Dimensions:

WARM WHITE K3200…3600 COLD WHITE K5500…6500 BLUE 0,25A - 3,2W (12,7V) 10…15,2 V D.C. (mm) 1000 x 9,0 x h 2,5

The standard flexible PCB module is made of 60 LEDs with 1,6 cm pitch, has a length of 100cm and a width of 0,9 cm. This module can be divided into sections of 3 LEDs which are 5 cm long, the power supply is given by welding a couple of 20 cm long red/black cables at one of the ends. For the fixing, the strip is provided with sticky tape, possibly we recommend to apply the module on metal surfaces. 5m COIL version with 300 LEDs SMD 3528, 16mm pitch of the leds. Item no.01630065623 - 5000.300 3528 P16WW Item no.01630001055 - 5000.300 3528 P16CW Item no.01630095790 - 5000.300 3528 P16 BLUE Light colour: Electrical input: Power supply: Dimensions:

WARM WHITE K3200…3600 COLD WHITE K5500…6500 BLUE 1,25A - 15,9W (12,7V) 10…15,2 V D.C. (mm) 5000 x 9,0 x h 2,5

The standard flexible PCB module is made of 300 LEDs, has a length of 500cm and a width of 0,9 cm. This module can be divided into sections of 3 LEDs which are 5 cm long 5m COIL waterproof IP67 version.

Item no.01630003006 - WP 5000.300 3528 P16WW Item no.01630001010 - WP 5000.300 3528 P16CW . Item no.01630006007 - WP 5000.300 3528 P16 BLUE

57


RANGE BASIC MODULES FLEXIBLE LINEAR MODULE 60 LEDS SMD 5050 WITH 16MM PITCH OF THE LEDS, FOR MAIN LIGHTING TO BE BUILT-IN, WARM WHITE (WW), COLD WHITE

Item no.01606003058 - 1000.60 5050 P16WW Item no.01606001059 - 1000.60 5050 P16CW Light colour: Electrical input: Power supply: Dimensions:

WARM WHITE K3200…3600 COLD WHITE K5500…6500 0,93A-11,8W (12,7V) 10…15,2 V D.C. (mm) 1000 x 9,0 x h 2,5

The standard flexible PCB module is made of 60 LEDs with 1,6 cm pitch, has a length of 100cm and a width of 1,2 cm. This module can be divided into sections of 3 LEDs which are 5 cm long, the power supply is given by welding a couple of 20 cm long red/black cables at one of the ends. For the fixing, the strip is provided with sticky tape, possibly we recommend to apply the module on metal surfaces. 5m COIL version with 300 LEDs SMD 5050, 16mm pitch of the leds. Item no.01630003056 - 5000.300 5050 P16WW Item no.01630001057 - 5000.300 5050 P16CW Light colour: Electrical input: Power supply: Dimensions:

WARM WHITE K3200…3600 COLD WHITE K5500…6500 4,63A-58,8W (12,7V) 10…15,2 V D.C. (mm) 5000 x 9,0 x h 2,5

The standard flexible PCB module is made of 300 LEDs, has a length of 500cm and a width of 1,2 cm. This module can be divided into sections of 3 LEDs which are 5 cm long


FLEXIBLE LINEAR MODULE 120 LEDS SMD 3528 WITH 8MM PITCH OF THE LEDS, FOR MAIN LIGHTING TO BE BUILT-IN, WARM WHITE (WW), COLD WHITE (CW)

Item no.01612003060 - 1000.120 3528 P8WW Item no.01612001061 - 1000.120 3528 P8CW Light colour: Electrical input: Power supply: Dimensions:

WARM WHITE K3200...3600 COLD WHITE K5500…6500 BLUE 0,50A - 6,4W (12,7V) 10…15,2 V D.C. (mm) 1000 x 9,0 x h 2,5

The standard flexible PCB module is made of 120 LEDs with 0,8 cm pitch, has a length of 100cm and a width of 0,9 cm. This module can be divided into sections of 3 LEDs which are 2,5 cm long, the power supply is given by welding a couple of 20 cm long red/black cables at one of the ends. For the fixing, the strip is provided with sticky tape, possibly we recommend to apply the module on metal surfaces. 5m COIL version with 600 LEDs SMD 3528, 8mm pitch of the leds. Item no.01660003038 - 5000.600 3528 P8WW Item no.01660001062 - 5000.600 3528 P8CW . Light colour: Electrical input: Power supply: Dimensions:

WARM WHITE K3200…3600 COLD WHITE K5500…6500 2,50A - 31,8W (12,7V) 10…15,2 V D.C. (mm) 5000 x 9,0 x h 2,5

The standard flexible PCB module is made of 600 LEDs, has a length of 500cm and a width of 0,9 cm. This module can be divided into sections of 3 LEDs which are 2,5 cm long

59


RANGE BASIC MODULES FLEXIBLE LINEAR MODULE 33 LEDS SMD 3528 WITH 50MM PITCH OF THE LEDS, FOR SECONDARY LIGHTING TO BE BUILTIN, WARM WHITE (WW)

Item no.01603365648 - 1650.33 3528 P50WW Light colour: Electrical input: Power supply: Dimensions:

WARM WHITE K3200…3600 0,17 A - 2,1 W (12,7V) 10…15,2 V D.C. (mm) 1650 x 9,0 x h 2,5

The standard flexible PCB module is made of 33 LEDs with 5 cm pitch, has a length of 165cm and a width of 0,9 cm. This module can be divided into sections of 3 LEDs which are 15 cm long, the power supply is given by welding a couple of 20 cm long red/black cables at one of the ends.

4,95m COIL version with 99 LEDs SMD 3528, 50mm pitch of the leds. Item no.01609965624 - 4950.99 3528 P50WW Light colour: Electrical input: Power supply: Dimensions:

WARM WHITE K3200…3600 0,50 A - 6,3 W (12,7V) 10…15,2 V D.C. (mm) 4950 x 9,0 x h 2,5

The standard flexible PCB module is made of 99 LEDs, has a length of 495cm and a width of 0,9 cm. This module can be divided into sections of 3 LEDs which are 15 cm long


61 FLEXIBLE LINEAR MODULE 150 LEDS SMD 5050 WITH 32MM PITCH OF THE LEDS, FOR SECONDARY LIGHTING TO BE BUILT-IN, RGB

Item no.01615005748 - 5000.150 5050 P32 RGB Light colour: Electrical input: Power supply: Dimensions:

RED / GREEN / BLUE MAX 2,50A – 31,8W (12,7V) 10…15,2V D.C. (mm) 5000 x 9,0 x h 2,5

The module with flexible PCB is made of 150LEDs within a distance of 3,2cm from each other and a total length of 500cm. It can be divided in sections every 3 LEDs for a length of 10cm. For the supply there are 4 welded cables; one is the common positive pole, the other 3 correspond to the negative poles of the RED/GREEN/BLUE leds. For the fixing, the strip is provided with sticky tape. When possible, we recommend to apply the module on metal surfaces. We recommend to use this module together with the RC6-RGB 12.4 control unit. Waterproof IP67 version Item no.01615004005 - WP 5000.150 5050 P32 RGB Connection Kit with 4 wires + male/female terminals for RGB module Item no.73602202002 - KIT MICROFIT MAS/FEM


RANGE ACCESSORIES AND REPLACEMENTS Mirrors with Leds lights that give an exclusive and practical look to the bathroom, dimmer control units to control the different modules and other items are part of the range of ACCESSORIES. For what concerns the REPLACEMENT range instead there are switches and dissipators available. Glass mirror dimensions mm 430 x 490 x 3mm, with 24+24 SMD 3528 LEDs positioned along the 490mm side left and right at 16mm distance between one and the other.

Item no. 40204803001 - SPC 430.490 24+24WW Light colour: Electrical input: Power supply: Dimensions:

WARM WHITE K3200…3600 0,20A - 2,54W (12,7V) 10…15,2V D.C. (mm) 430 x 490 x 7

Glass mirror dimensions mm 430 x 490 x 3mm, with 9+9 SMD 3528 LEDs positioned along the 490mm side left and right at 50mm distance between one and the other.

Item no. 40201803002 - SPC 430.490 9+9WW Light colour: Electrical input: Power supply: Dimensions:

WARM WHITE K3200…3600 0,08A - 1,0W (12,7V) 10…15,2V D.C. (mm) 430 x 490 x 7


63 CONTROL UNIT FOR RGB MODULES POWER SUPPLY. IT INCLUDES BASE + REMOTE CONTROL. THE DIFFERENT OPTIONS CAN BE SELECTED EITHER ON THE BASE AS WELL AS THROUGH THE REMOTE CONTROL IN ORDER TO MANAGE THE DEVICE ALSO WITHOUT REMOTE. (LOW BATTERY, LOSS EXT..)

Item no. 71401012003 - RC6-RGB 12.4 Options: Colours; red, blue, pink, green, yellow, turquoise, white. 3 or 7 shifting or fading colours with speed regulator Electrical input: 4,0A x 3 - 144W Power supply: 10…14,4V D.C. Dimensions: BASE (mm) 89 x 70 x H28

"TOUCH-DIMMER" CONTROL UNIT WITH 3 SEPARATE CHANNELS TO CONTROL SUPER BRIGHT OR SMD PLUS LEDS SPOTS AND MODULES, WITH DIMMING SETTINGS

Item no. 71500512001 - PNL-1 LTD 3.05 Settings: 1 - ON feature by touching the key once 2 - DIMMING FEATURE by keeping the key pressed 3 - OFF feature by touching the key once Electrical input: 0,5A x 3 - 18W Power supply: 10…14,4V D.C.


RANGE ACCESSORIES AND REPLACEMENTS SWITCHES 0-1 Item no. 73300090246 - ITR 1A-B NERO application in hole d. 22mm, length 22mm Item no. 73300160719 - ITR 1A-W BIANCO application in hole d. 22mm, length 22mm Item no. 73300090733 - ITR 2A+B NERO application in specific hole

SWITCHES 1-0-2 Item no. 73302202001 - ITR 3A-B NERO application in hole d. 22mm, length 22mm Item no. 73302202002 - ITR 3A-W BIANCO application in hole d. 22mm, length 22mm

CLIP FOR LINEAR-P D.24 Item no. 89554510249 - CLIP PER LINEAR-P D.24

RUBBER END CAP D.22 Item no. 89654550248 - TAPPO GOMMA TERMINALE D.22


ALUMINIUM DISK ADAPTER/DISSIPATOR, THICKNESS OF 1,2MM FOR SUPER BRIGHT LEDS WITH 9/12/21 LEDS; IT REPLACES THE ORIGINAL GLASS ON HALOGEN SPOTS.

Item no. 82109511157 - DAD 34.9 Disk Ø 34mm 9LEDs Item no. 82109512251 - DAD 40.9 Disk Ø 40mm 9LEDs Item no. 82112512156 - DAD 40.12 Disk Ø 40mm 12LEDs Item no. 82112513149 - DAD 43.12 Disk Ø 43mm 12LEDs Item no. 82112514155 - DAD 45.12 Disk Ø 45mm 12LEDs Item no. 82121514254 - DAD 45.21 Disk Ø 45mm 21LEDs Item no. 82121516150 - DAD 48.21 Disk Ø 48,5mm 21LEDs Item no. 82121515143 - DAD 50.21 Disk Ø 50mm 21LEDs

ALUMINIUM SUPPORT/DISSIPATING BARS, THICKNESS OF 1,2MM AND WIDTH OF 19 MM, FOR SUPER BRIGHT LINEAR MODULES: THEY ARE SUITABLE TO CREATE MULTIPLE ASSEMBLED UNITS USING THE 12 AND 24LEDS MODULES AS BASEMENT

Item no. 82212511255 - BSD 130.12 Linear bar L=130mm 12LEDs for 1 12LEDs module Item no. 82224511256 - BSD 250.24 Linear bar L=250mm 24LEDs for 1 24LEDs module Item no. 82236511257 - BSD 370.36 Linear bar L=370mm 36LEDs for 1+1 12+24LEDs modules

65


TECNOLED IS ALSO:

HOME - BUSINESS - MARINE


SALES TERMS AND CONDITIONS 1. ORDERS - Orders received are valid as a booking document and do not commit BARTOLACCI DESIGN to totally or partially deliver the items ordered, BARTOLACCI DESIGN reserves the right to accept or decline orders. The minimum invoice amount is Euro 200,00 VAT excluded. 2. DELIVERY - Agreed delivery terms are not binding. In no case and for no reason will BARTOLACCI DESIGN pay for any direct and indirect damage due to delivery delays. 3. PACKAGING - Goods are sold in their pre-defined packaging. Packaging costs are net of discount. Different packaging costs previously agreed upon (not standard) will be added to the total cost. 4. TRASPORT AND EXPEDITION - Goods are dispatched, if not otherwise agreed, EX WORKS and are transported with risks and perils of the customer, also if transport costs are included. In no case and for no reason will BARTOLACCI DESIGN pay for any direct and indirect damage due to delivery delays. Unless specific instructions are provided, deliveries will be carried out with a carrier chosen by Bartolacci Design, with no possibility to claim and transport costs will be invoiced. 5. RETURNED PARTS - We will not accept any returned goods without our Sales Manager's written authorization. According to common sense, no returned goods requests will be considered whose delivery was carried out 30days before the returning request or for goods that are not included in our official catalogues. 6. CLAIMS - We do not accept any claim after 8 (eight) days after receiving the goods. The date written in the transport document shall apply. 7. PAYMENT TERMS - Payment methods are indicated in the invoice. After the agreed terms, BARTOLACCI DESIGN will be automatically authorised to calculate late interests according to the law applied and to immediately suspending any order processing. 8. INVOICING - Invoices will be considered accepted in every part by the customer, unless rejected within 5 days after receiving them. 9. PRICE LISTS - Prices indicated in the price list can vary depending on market requirements or on raw material or manpower price variation, without notice; however, for processed orders the prices indicated in the order confirmation shall apply. Prices indicated in the price list are meant for one piece available with the indicated packaging. Unless otherwise indicated, prices are meant VAT excluded. 10. CATALOGUES - Any drawings, pictures, technical data indicated in the catalogues and on TECNOLED - BARTOLACCI DESIGN price lists are not binding. BARTOLACCI DESIGN reserves the right to change catalogues, price lists and products at any time and without notice, if-according to its undisputable decision-such changes are considered useful in terms of production or quality purposes, functioning and performance. 11. WARRANTY - Our product warranty has a 2-years validity after sales date; Receipt or Invoice date shall apply. No use other than the one indicated by the manufacturer is covered by the warranty (over-tension, short-circuit, incorrect ventilation, etc.). 12. DISPUTES - For any dispute the Italian law will be applied and the Florence Court shall have jurisdiction.

TECNOLED reserves the right to modify the information included in this catalogue at any time without advising.

67


INNOVATIVE LIGHTING SYSTEM

“When HONESTY, RELIABILITY AND COOPERATION are the basic elements of a business relationship then RESPECT and mutual SATISFACTION become the natural consequences“

En_Cat_motorhome_7_1011  

The future? The future is our present because the research within Tecnoled is continuous and constant. Our aim has always been that of propo...

Read more
Read more
Similar to
Popular now
Just for you