Issuu on Google+

C.R.I. STAINLESS STEEL SUBMERSIBLE PUMPS - 4”, 6”, 8” & 10”

50Hz

An ISO 9001 & ISO 14001 Company For specific models only.


T H E

B E G I N N I N G

of C.R.I., way back in 1961, was a resolute attempt to product a few irrigation equipments using the limited facilities of an in-house foundry. Eventually the founder's dream was coming true as the small production unit he started kept growing rapidly. Now, after four eventful decades, it is an enormous, widely reputed organization, which produces more than 1000 varieties of perfectly engineered pumps and motors and sells its products in numerous countries spread across 6 continents.

C . R . I . I S O N E A M O N G the few pioneers in the world to produce 100% stainless steel submersible pumps. Having achieved a record production capacity of over 750,000 pumps per annum, today C.R.I. is rubbing its shoulders with the best brands in the world, with advanced technology and safety standards as its hallmarks.

THE INFRASTRUCTURE of C.R.I. is pretty comprehensive with state-of-the-art machineries and a high potential R&D wing, all within its own covered area of 100,000 square metres. The production environment is accredited with ISO 9001 & 14001 certification. The R&D team always stays in tune with the changing scenario and seldom fails in coming up with outstanding solutions every time.

N E E D L E S S T O S A Y , behind this legendary growth lies the untiring, innovative, enthusiastic and dedicated team work. And, of course, a flawlessly maintained value system too. The name C.R.I. itself encapsulates the company's ethos: ‘‘ Commitment, Reliability, Innovation’’.


Pumping trust. Worldwide.

GENERAL INFORMATION

STAINLESS STEEL SERIES

PERFORMANCE CURVE CONDITIONS The conditions below apply to the curves shown on the following pages. a. The Performance curves show pump performance at rated speed, voltage and @ 10ft minimum submergence.

The speed of motor is approximately : 3" motor

:

n = 2800 rpm

4" motor

:

n = 2900 rpm

6" motor

:

n = 2900 rpm

8" & 10" motor

:

n = 2900 rpm

b.

The measurements were made with airless water at 20°C. When pumping liquids with a density higher than that of water, motors with correspondingly higher outputs must be used.

c.

Pipe friction losses have not been included in the performance curves and performance tables.

d.

The bold curves indicate the recommended performance range.

e.

Q/H : The curves are inclusive of check valve and suction inter-connector losses at the actual speed.

f.

Efficiency curve : “

g.

Curve tolerance according to ISO : 9906, Annex - A.

h.

The performance are at rated voltage and are only Indicative. Actual discharge depends on availability of water in well, based on strength of water source, height of water column, submergence of pump, etc.,.

i.

The given performance are for a specific materials of construction of pump.

j.

The outlet size of the pumps are as per BSP standard.

h %”

shows pump stage efficiency.

In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

GENERAL INFORMATION

STAINLESS STEEL SERIES MODEL IDENTIFICATION CODE DEEPWELL SUBMERSIBLE PUMP S

X

X - XXX

/

XX - (X)

(X) R - Reduced impeller RR - Further reduced impeller

DEEPWELL SUBMERSIBLE PUMP

NOMINAL MOTOR DIAMETER (This digit will be applicable only when the pump is suitable for lesser dia motor)

NOMINAL PUMP DIAMETER

NUMBER OF IMPELLERS NOMINAL FLOW ( m3/h ) To include decimal values in the nominal flow from 0.1 to 0.8 alphabets A-H are used. TYPE OF MATERIALS OF CONSTRUCTION (M.O.C.) DEEPWELL SUBMERSIBLE MOTOR X

X

X

X

-

XXX

X

X VOLTAGE N = 525

DEEPWELL SUBMERSIBLE MOTOR W = Water filled R = Resin filled encapsulated L = Non-toxic fluid filled

PHASE / CONNECTION / CONTROL BOX / FREQUENCY S = 1Ph / CSCR type / 3 wire / 50Hz N = 1 Ph / PSC / 3 wire / 50Hz M = 1 Ph / PSC / 2 wire / 50Hz D = 3 Ph / S.D. / 50Hz T = 3 Ph / DOL / 50Hz

NOMINAL MOTOR DIA 3 = 3", 4 = 4", 6 = 6", 8 = 8", 10=10" Type of Materials of Construction Type = A/B/K/N

MOTOR POWER (kW) 03 = 0.37, 05 = 0.55, 11 = 1.1, 75 = 7.5, 110 = 11, 185 = 18.5, A00 = 100, A25 = 125

This digit is only applicable for 1-Phase “R” Series motors without Lighting Arrestor.

DEEPWELL SUBMERSIBLE PUMP SET (Pump + Motor) PUMP MODEL S

X

X - XXX / XX

+ +

MOTOR MODEL X

X

X -

XXX

X

DEEPWELL SUBMERSIBLE PUMP SET (Pump + Motor) PUMP MODEL

+

MOTOR MODEL

S6S - 18 / 03

+

W6A - 22 T


Pumping trust. Worldwide.

STAINLESS STEEL SERIES


COMMITMENT

RELIABILITY

Pumping trust. Worldwide.

INNOVATION

STAINLESS STEEL SERIES Submersible Pumps C.R.I. Submersible Pumps are the products of the expertise gained from over four decades of experience, endurance and workmanship. These products are engineered to perfection with utmost care and stringent quality control at all stages to ensure a trouble free service.

Description : C.R.I. 4”, 6”, 8” & 10" Stainless steel series submersible pumps are made of corrosion resistance stainless steel with built in check valve. All vital components of these pump models are made of high quality 304 / 316 grade stainless steel and the shaft is of S.S 304 / 329 / 431. The optimal design of impellers and diffusers enables the best possible hydraulic efficiency.

These pumps are of multistage centrifugal type, which can be firmly coupled to a submersible electric motor, which operates submerged beneath the surface of water. Built in check valve prevents back flow, and reduces the risk of water hammer. All mounting dimensions of pumps and motors are in accordance with NEMA standards. C.R.I. submersible pumps can be offered

with either C.R.I. ‘W' series, water

filled rewindable submersible motors / C.R.I. 'R' series, Resin Filled encapsulated (water lubricated) submersible motors / C.R.I. ‘L' Series, Non-toxic liquid filled submersible motors or

any

other

NEMA

standard motors.

Features : l More longevity & hygiene 304 / 316 l

l

l

Precise parts made of

S .S

Shaft is of S.S 304 / 431 / 329 l High operating efficiency

Highly durable & rigid in construction l Good resistance against sand &

abrasives

l

Easy to dismantle & repair l NEMA mounting standards l

Can handle high upthrust loads lubricated bearings

l

l

Extremely hardwearing water

Built-in check valve to prevent back flow.

Applications : l Domestic & Civil Water Supply l Irrigation l Fountains l

Industrial & Rural water supply

l

Fire fighting & Pressure Boosting

units l Ponds l Gardens l Sprinkler Systems and Mining.


Pumping trust. Worldwide.

GENERAL INFORMATION

Pumped Liquids Clean, thin, non-aggresive, non explosive, clear, cold, fresh water without abrasives, solid particles or fibre having the following characteristics a)

Temperature

33°C (max)

b)

Permissible amount of sand

50g/m³ (max)

c)

Chlorine ion density

500 ppm (max)

d)

Allowable solids

3000 ppm (max)

e)

Specific gravity

1.004 (max)

f)

Hardness (Drinking water)

300 (max)

g)

Viscosity

1.75 x 106m2/sec (max)

h)

Turbidity

50 ppm silica scale (max)

i)

pH

6.5 to 8.5

PUMP OPERATING LIMITATIONS Nominal Diameter

4”(100mm)

6”(150mm)

8”(200mm)

10”(250mm)

Power Range

0.37 - 7.5 kW

2.2 - 45 kW

5.5 - 93 kW

11 - 93 kW

Speed

2900 rpm

2900 rpm

2900 rpm

2900 rpm

3

Discharge Range

m /hr

0.4 - 19

7 - 80

20 - 126

18 - 162

LPS

0.12 - 5.28

1.94 - 22.24

5.5 - 35

5 - 45

Total head range

m

4.0 - 500

4.5 - 520

8 - 410

16 - 280

ft

13.0 - 1640

14.7 - 1705.6

26.24 - 1344.8

52.48 - 918.4

1¼, 1½ & 2

2, 2½, 3 & 4

4&5

6

Outlet size in inches

Maximum temperature of Pumped liquid

Motor

Minimum cooling flow along the motor

Vertical installation

Horizontal installation minimum 30°angle

4” & 6"

0.15 m/s

33 °C

33 °C

8"

0.16 m/s

33 °C

10"

0.15 m/s

33 °C

Maximum operating pressure 4" Submersible pump

5.0 Mpa (50 bar)

6" Submersible pump

5.2 Mpa (52 bar)

33 °C

8" Submersible pump

4.1 Mpa (41 bar)

33 °C

10" Submersible pump

2.8 Mpa (28 bar)

Available types of materials of construction : S (S.S-304) and N (S.S-316). In case of M.O.C Type - N the third digit of the pump model "S" will be replaced with "N". The given performance ranges are same for Type - S & N. In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


COMMITMENT

RELIABILITY

Pumping trust. Worldwide.

INNOVATION

STAINLESS STEEL SERIES Group Performance Curves - 4"

H - (m) 1600

520

480

440 1400 400 1200

360

320 1000 280 800

240

200 600

S4S-8

S4S-5

120

S4S-2

400

S4S-3

160

S4S-1

80

S4S-14

H - (FEET)

560 1800

200 40

0

0 0

1

2

0

0.5

0

8

3

4

1.0

5

6

1.5 16

7

8

2.0 24

9

10

2.5 32

11

12

3.0 40

13

14

3.5 48

15

4.0 56

16

4.5 64

17

18

5.0 72

19

20

Q - (m続/Hr) Q - (lps) 5.5 80

Q - (US GPM)


Pumping trust. Worldwide.

GENERAL INFORMATION

H - (m )

H - (F E E T )

Group Performance Curves - 6", 8" & 10" 560

1800 520

1600

480

440 1400 400

1200

360

320 1000 280

800

240

S8S-78

S6S 48

S6S-30

160

120

S6S 60

80

S10S-125

S8S-95

400

S6S 18

S6S-14

600

S6S 22

200

200 40

0

0 0

4

8

12

16

22

30

38

54

70

86

110

126

142

158

174

190

206

222

Q - (m続/Hr) Q - (lps) 0

1

0

16

2

3 32

4 48

5

6

64 79.36 96

8

10 12

16

20

24

28

32

36

40

44

48

52

128

160 192

256

320

384

448

512

576

640

704

768

832

56 896

60

64

960

Q - (US GPM)

In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


COMMITMENT

RELIABILITY

Pumping trust. Worldwide.

INNOVATION

STAINLESS STEEL SERIES Materials of Construction NOMINAL DIA. 4”

PART NAME

NOMINAL DIA . 6”, 8” & 10"

TYPE - S

TYPE - N

TYPE - S

TYPE – N

CHECK VALVE HOUSING

S.S - 304

S.S. - 316

S.S. - 304

S.S. - 316

CHECK VALVE DISC

S.S - 304

S.S. - 316

S.S. - 304

S.S. - 316

CHECK VALVE SEAT

NBR

NBR

NBR

NBR

DIFFUSER CHAMBER

S.S - 304

S.S. - 316

S.S. - 304

S.S. - 316

IMPELLER

S.S - 304

S.S. - 316

S.S. - 304

S.S. - 316

SPLIT CONE WITH NUT***

S.S - 304

S.S. - 316

S.S. - 304

S.S. - 316

NBR

NBR

NBR

NBR

S.S - 304 / TEFLON S.S - 420 / BRONZE

S.S - 316 / TEFLON

S.S. - 420 / CARBON

S.S. - 420 / CARBON

INTERMEDIATE BEARING

NBR

NBR

NBR

NBR

SUCTION INTER CONNECTOR

S.S. - 304

S.S - 316

S.S. - 304

S.S. - 316

INLET SCREEN

S.S. - 304

S.S. - 316

S.S. - 304

S.S. - 316

S.S. - 304 / 431**

S.S. - 304 / 431**

S.S. - 431

S.S. - 329

COUPLING SPLINES

S.S. - 329

S.S - 329

S.S. - 329

S.S. - 329

LOCKING STRAPS

S.S. - 304

S.S - 316

S.S. - 304

S.S. - 316

CABLE GUARD

S.S. - 304

S.S - 316

S.S. - 304

S.S. - 316

IMPELLER WEAR RING / SEAL RING UPTHRUST WASHER / STOP RING

PUMP SHAFT

** Provided only for 4", 14m3/hr. *** Applicable for 4", 14m3/hr and 6" 14m3 to 60m3/hr pump models.

Note : 4" 1m3 to 8m3/hr pumps are provided with hexagonal shaft and other 4" & 6" pumps are with cylindrical shaft.


Pumping trust. Worldwide.

STAINLES S STEEL SERIES

Exploded View of 4" Mixed & Radial flow pumps 20.01 20.01 20.02 21.01

23.02 21.03

23.01 21.02 22.01 22.03

21.02 22.05 22.06

22.01 22.02 22.03 22.04 23.01

24.01 24.02 25.01

25.01 27.01

26.01

27.01

23.02

28.01

26.01

26.02 26.03

24.02

26.02 26.03 28.01

Part No. 20.01 20.02 21.01 21.02 21.03 22.01 22.02 22.03 22.04 22.05 22.06

Part Name Check valve housing Check valve disc Check valve seat Diffuser chamber Top Casing rubber bush Rubber bush Split cone nut Impeller Split cone Diffuser chamber (Middle) Bracket sleeve

Part No. 23.01 23.02 24.01 24.02 25.01 26.01 26.02 26.03 27.01 28.01

Part Name Wearing ring / Seal ring Up thrust washer / stop ring Diffuser chamber strainer Spacer sleeve Pump shaft with coupling Strap Washer Nut Cable guard Suction inter connector


COMMITMENT

RELIABILITY

Pumping trust. Worldwide.

INNOVATION

STAINLESS STEEL SERIES Exploded View of 6" Mixed & Radial flow pumps 20.01 20.01 20.02 21.01 21.02 21.03 21.02 21.03

22.01 22.02 22.03 22.04 22.05 23.01 22.02 22.03 22.05 23.01 24.01

24.02 25.01 26.01 27.01

24.03 26.02 26.03 24.04

27.01

28.01

26.01 25.01 24.01 24.02 24.04 26.02 26.03 28.01

Part No. 20.01 20.02 21.01 21.02 21.03 22.01 22.02 22.03 22.04

Part Name Check valve housing Check valve disc Check valve seat Diffuser chamber Rubber bush Intermediate bush Split cone nut Impeller Neck ring

Part No.

22.05 23.01 24.01 24.02 24.03 24.04 25.01 26.01 26.02

Part Name

Split cone Seal ring / Wearing ring Diffuser chamber (1st stage) Up thrust Washer / stop ring Diffuser chamber strainer Spacer sleeve Pump shaft with coupling Strap Washer

Part No.

26.03 27.01 28.01

Part Name

Nut Cable guard Suction inter connector


Pumping trust. Worldwide.

STAINLES S STEEL SERIES

Exploded View of 8" & 10 pumps

PART : NO

DESCRIPTION

20.01

CHECK VALVE HOUSING

21.01

CHECK VALVE SPRING

21.02

CHECK VALVE DISC

21.03

CHECK VALVE SEAT

21.04

0-RING

21.05

CHECK VALVE BRACKET

21.06

CONE GUIDE PLATE

22.01

PUMP SHAFT

23.01

DIFFUSER CHAMBER (WITH DIFFUSER)

23.02

IMPELLER WEARING RING

23.03

BUSH

23.04

IMPELLER

23.05

SLEEVE

23.06

UPTHRUST PAD

23.07

UP THRUST WASHER RING

24.01

COUPLING

24.02

COUPLING KEY

25.01

SUCTION INTER CONNECTOR

25.02

INLET SCREEN

26.01

CABLE GAURD

27.01

NUT

28.01

LOCKING STRAP

31.01

LOCK NUT


Pumping trust. Worldwide.

Nominal Diameter : 4"

Nominal Flow : 1m 3/h

Outlet Size : 1¼"

Flow Range : 0.4 - 1.7 m³/h

400

S4S-1 2900 rpm

E F F IC IE N C Y ( %)

1300

H - (m)

H - (feet)

STAINLES S STEEL SERIES

1200

350 1100

S4 S 1000

h% -1/5

50

7 30

300

S4S -1/5

900

10

0

250 800

S4S-1

/42

700

S4S-1/3

200

6

600

S4 S-

1/28

500

150

S4S-1/21

400

S4S-1

/18

100 300

S4S-1/1

4

200

S4S-1/09

50

100

0

0 0

0.20

0.40

0.60

0.80

1.00

1.20

1.40

1.60

1.80

Q - (m³/h)

Q - (lps) 0

0.06

0.12

0

1

2

0.18 3

0.24

0.30 4

0.36 5

0.42 6

0.48 7

Q - (US gpm) Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.


Pumping trust. Worldwide.

Nominal Diameter : 4"

Nominal Flow : 1m /h

Outlet Size : 1Âź"

3

STAINLES S STEEL SERIES

DIMENSIONS & WEIGHT PUMP MODEL

REQUIRED MOTOR POWER

DIMENSIONS (mm)

APPROX NETT. WEIGHT (kg)

kW

HP

OD

RP

H2

S4S-1/09

0.37

0.5

101

32

356

4.4

S4S-1/14

0.37

0.5

101

32

466

6.1

S4S-1/18

0.55

0.75

101

32

554

7.3

S4S-1/21

0.55

0.75

101

32

620

8.4

S4S-1/28

0.75

1

101

32

774

10.7

S4S-1/36

1.1

1.5

101

32

1118

16.9

S4S-1/42

1.1

1.5

101

32

1262

18.7

S4S-1/50

1.5

2

101

32

1478

21.4

S4S-1/57

1.5

2

101

32

1646

22.8

Available types of materials of construction : S (S.S-304) and N (S.S-316). In case of M.O.C Type - N the third digit of the pump model "S" will be replaced with "N". The given performance curves are same for Type - S & N. In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

Nominal Diameter : 4"

Nominal Flow : 2m 3/h

Outlet Size : 1¼"

STAINLES S STEEL SERIES

H - (m)

H - (feet)

Nominal Flow - 2 (m³/Hr) 550

S4S-2 50Hz 2900 RPM

S4S-2/90

1700

EFFICIENCY ( % )

500 1600

1500

S4S-2/75 450

1400

S4S-2/65 1300

EFF. %

400

60 40

1200 20

350

S4S-2/55

1100

1000

300

S4S-2/48

900

800

S4S-2/40

250

S4S-2/33 700 200

S4S-2/28

600

500

S4S-2/23

150

S4S-2/18

400

300

100

S4S-2/15 S4S-2/13

200

S4S-2/09

50

S4S-2/06

100

0

0 0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8

2.0

2.2

2.4

2.6

Q - (m³ /Hr) Q - (lps) 0 0

0.10

0.30

0.20 2.0

4.0

Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.

0.40 6.0

0.50 8.0

0.70

0.60 10.0

Q - (US gpm)


Pumping trust. Worldwide.

Nominal Diameter : 4"

Nominal Flow : 2m /h

Outlet Size : 1Âź"

3

STAINLES S STEEL SERIES

PUMP MODEL

REQUIRED MOTOR POWER

DIMENSIONS (mm)

APPROX NETT. WEIGHT (kg)

kW

HP

OD

RP

H2

S4S-2/06

0.37

0.5

101

32

290

4.1

S4S-2/09

0.37

0.5

101

32

356

4.8

S4S-2/13

0.55

0.75

101

32

444

5.7

S4S-2/15

0.55

0.75

101

32

488

6.1

S4S-2/18

0.75

1

101

32

554

6.8

S4S-2/23

1.1

1.5

101

32

664

8.0

S4S-2/28

1.5

2

101

32

774

9.1

S4S-2/33

1.5

2

101

32

1046

10.2

S4S-2/40

2.2

3

101

32

1214

12.5

S4S-2/48

2.2

3

101

32

1430

15.2

S4S-2/55

3

4

101

32

1598

17.5

S4S-2/65

3

4

101

32

1862

22.3

S4S-2/75

4

5.5

101

32

2102

26.8

S4S-2/90

4

5.5

101

32

2486

33.2

Available types of materials of construction : S (S.S-304) and N (S.S-316). In case of M.O.C Type - N the third digit of the pump model "S" will be replaced with "N". The given performance curves are same for Type - S & N. In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

Nominal Diameter : 4"

Nominal Flow : 3m 3/h

Outlet Size : 1¼"

1300

Flow Range : 1.44 - 4.5 m³/h S4S-3 50Hz 2900 RPM

400

EFFICIENCY ( % )

H - (feet)

H - (m)

STAINLES S STEEL SERIES

S4S-3/60 1200

360

1100

S4S-3/52

80

320

h%

1000

900

800

60

S4S-3/45

280

40

S4S-3/39

20

240

S4S-3/33

700 200

S4S-3/29 600

S4S-3/25

160 500

S4S-3/22 400

S4S-3/18

120

S4S-3/15 300

S4S-3/12

80 200

S4S-3/09 S4S-3/06

40 100

0

0 0.5

0

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5

Q - (m³ /h) Q - (lps) 0 0

0.1 2.0

0.2

0.3 4.0

0.4 6.0

0.5

0.6

8.0

10.0

0.7

0.8 12.0

0.9 14.0

1.0 16.0

1.1

1.2

18.0

1.3 20.0

Q - (US gpm) Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.


Pumping trust. Worldwide.

Nominal Diameter : 4"

Nominal Flow : 3m /h

Outlet Size : 1Âź"

3

STAINLES S STEEL SERIES

DIMENSIONS & WEIGHT PUMP MODEL

REQUIRED MOTOR POWER

DIMENSIONS (mm)

APPROX NETT. WEIGHT (kg)

kW

HP

OD

RP

H2

S4S-3/06

0.37

0.5

101

32

290

3.3

S4S-3/09

0.55

0.75

101

32

356

4.1

S4S-3/12

0.75

1

101

32

422

5.0

S4S-3/15

1.1

1.5

101

32

488

6.0

S4S-3/18

1.1

1.5

101

32

554

7.0

S4S-3/22

1.5

2

101

32

642

8.1

S4S-3/25

1.5

2

101

32

708

9.1

S4S-3/29

2.2

3

101

32

796

10.2

S4S-3/33

2.2

3

101

32

1046

12.9

S4S-3/39

3

4

101

32

1190

15.4

S4S-3/45

3

4

101

32

1334

16.4

S4S-3/52

4

5.5

101

32

1526

18.6

S4S-3/60

4

5.5

101

32

1718

21.2

Available types of materials of construction : S (S.S-304) and N (S.S-316). In case of M.O.C Type - N the third digit of the pump model "S" will be replaced with "N". The given performance curves are same for Type - S & N. In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

Nominal Diameter : 4"

Nominal Flow : 5m /h

Outlet Size : 1½"

3

1200

H - (m)

380

Flow Range : 2.2 - 7.5 m³/h 360

S4S -5/6

0

S4S -5/5

2

S4S -5/4

4

S4S-5 2900 rpm

340 1100 320 1000

E F F IC IE N C Y ( %)

H - (feet)

STAINLES S STEEL SERIES

300

280 900

h%

80 60

260

40 20

800

S4S-5 /38

240

220 700

S4S-5 /33

200 600

180

S4S-5/25

160 500

S4S-5/21

140

400

120

S4S-5/17 100 300 80

200

S4S-5/12

60

S4S-5/08 S4S-5/06

40

S4S-5/04

100 20

0

0

0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5

5.0

5.5

6.0

6.5

7.0

7.5

Q - (m³/h) Q - (lps) 0 0

0.5 2.0

0.30 4.0

0.45 6.0

0.60 8.0

10.0

0.75 12.0

0.90 14.0

1.05 16.0

1.20 18.0

20.0

1.35 22.0

1.50 24.0

1.65 26.0

1.80 28.0

1.95 30.0

2.10 32.0

Q - (US gpm) Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.


Pumping trust. Worldwide.

Nominal Diameter : 4"

Nominal Flow : 5m /h

Outlet Size : 1½"

3

STAINLES S STEEL SERIES

DIMENSIONS & WEIGHT PUMP MODEL

REQUIRED MOTOR POWER

DIMENSIONS (mm)

APPROX NETT. WEIGHT (kg)

kW

HP

OD

RP

H2

S4S-5/04

0.37

0.5

101

40

253

2.8

S4S-5/06

0.55

0.75

101

40

301

3.5

S4S-5/08

0.75

1

101

40

349

4.0

S4S-5/12

1.1

1.5

101

40

445

5.4

S4S-5/17

1.5

2

101

40

565

6.9

S4S-5/21

2.2

3

101

40

661

8.0

S4S-5/25

2.2

3

101

40

757

9.1

S4S-5/33

3

4

101

40

1116

13.9

S4S-5/38

4

5.5

101

40

1246

15.3

S4S-5/44

4

5.5

101

40

1402

17.5

S4S-5/52

5.5

7.5

101

40

1636

20.5

S4S-5/60

5.5

7.5

101

40

1844

22.2

Available types of materials of construction : S (S.S-304) and N (S.S-316). In case of M.O.C Type - N the third digit of the pump model "S" will be replaced with "N". The given performance curves are same for Type - S & N. In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

Nominal Diameter : 4"

Nominal Flow : 8m 3/h

Outlet Size : 2"

1100 1050 1000

H - (m)

Flow Range : 3.6 - 11.7 m続/h

S4S-8 2900 rpm

320

S4S -8/5 0

300

950 280

E F F IC IE N C Y ( %)

H - (feet)

STAINLES S STEEL SERIES

900 850 800

S4S -8

260

/44

240

80

h%

750

60

220 700 650 600

40

S4S-8 /34

200

20

S4S-8/3 0 180

550 160

S4S-8/ 25

500 450 400

140

S4S-8/22

120

S4S-8/18 350 100

S4S-8/15

300 250 200

80

S4S-8/12 S4S-8/10 S4S-8/09

60

S4S-8/07

150 40

S4S-8/05

100 20 50 0

0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

11.0

Q - (m続/h) Q - (lps) 0

0.25

0.50

0

4

8

0.75 12

1.0 16

1.25

1.50

20

24

1.75 28

2.0 32

2.25 36

2.50 40

2.75 44

3.0

3.25 48

Q - (US gpm) Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.


Pumping trust. Worldwide.

Nominal Diameter : 4"

Nominal Flow : 8m /h

Outlet Size : 2"

3

STAINLES S STEEL SERIES DIMENSIONS & WEIGHT PUMP MODEL

REQUIRED MOTOR POWER

DIMENSIONS (mm)

APPROX NETT. WEIGHT (kg)

kW

HP

OD

RP

H2

S4S-8/05

0.75

1

101

50

410

4.5

S4S-8/07

1.1

1.5

101

50

482

5.6

S4S-8/09

1.5

2

101

50

554

6.6

S4S-8/10

1.5

2

101

50

590

6.9

S4S-8/12

2.2

3

101

50

662

7.6

S4S-8/15

2.2

3

101

50

772

9.2

S4S-8/18

3

4

101

50

902

10.6

S4S-8/22

4

5.5

101

50

1046

12.5

S4S-8/25

4

5.5

101

50

1154

13.8

S4S-8/30

5.5

7.5

101

50

1334

16.0

S4S-8/34

5.5

7.5

101

50

1478

17.7

S4S-8/44

7.5

10

101

50

1862

22

S4S-8/50

7.5

10

101

50

2102

24.8

Available types of materials of construction : S (S.S-304) and N (S.S-316). In case of M.O.C Type - N the third digit of the pump model "S" will be replaced with "N". The given performance curves are same for Type - S & N. In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

Nominal Diameter : 4"

Nominal Flow : 14m 3/h

Outlet Size : 2"

Flow Range : 4 - 19 m続/h

S4S-14 50Hz 2900 RPM

600 180 170

550

500

h%

S4S-14/25

160

EFFICIENCY (%)

H - (feet)

H - (m)

STAINLES S STEEL SERIES

60 40

150

S4S-14/22 140

20

130

0

450

400

S4S-14/18

120 110

S4S-14/16

350 100 300

90

S4S-14/13

80

S4S-14/11

250 70

S4S-14/10 200

60

S4S-14/09

50 150

S4S-14/07 40

100

S4S-14/05

30 20

50 10 0

0 0

0

2

0

0.5

0

4

6

1

10

1.5

20

8

2

30

10

2.5

40

Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.

12

3

14

3.5

50

4

60

16

18

4.5

5

70

80

20 Q - (m続/h) Q - (lps) 5.5

90 Q - (US gpm)


Pumping trust. Worldwide.

Nominal Diameter : 4"

Nominal Flow : 14m /h

Outlet Size : 2"

3

STAINLES S STEEL SERIES

PUMP MODEL

REQUIRED MOTOR POWER

DIMENSIONS (mm)

APPROX NETT. WEIGHT (kg)

kW

HP

OD

RP

H2

S4S-14/05

1.5

2

101

50

573

6.5

S4S-14/07

2.2

3

101

50

703

7.8

S4S-14/09

3

4

101

50

833

9.1

S4S-14/10

3

4

101

50

898

9.9

S4S-14/11

3.7

5

101

50

963

10.8

S4S-14/13

4

5.5

101

50

1093

12.2

S4S-14/16

5.5

7.5

101

50

1288

14.4

S4S-14/18

5.5

7.5

101

50

1418

16.2

S4S-14/22

7.5

10

101

50

1678

18.7

S4S-14/25

7.5

10

101

50

1873

20.8

Available types of materials of construction : S (S.S-304) and N (S.S-316). In case of M.O.C Type - N the third digit of the pump model "S" will be replaced with "N". The given performance curves are same for Type - S & N. In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

Nominal Diameter : 6"

Nominal Flow : 14m 3/h

Outlet Size : 2"/2遜"**

Flow Range : 6 - 18 m続/h

S6S-14 2900 rpm

420

1350

400

S6S -1

380

4/32 S6S -14/ 31 S6S -1 4 / 30 S6S -14/ 29 S6S14/2 8 S6S14/2 7 S6S14/2 6 S6S14/2 5 S6S14/2 4 S6S14/2 3 S6S14/2 2 S6S-1 4/21 S6S-1 4/20 S6S-1 4/19 S6S-1 4/18 S6S-1 4/1 S6S-1 7 4/16

1200

360 340 1050

320 300

900

280 260 240

750

220 200 600

180

450

80

h% 70 60 50 40

S6S-1 4/15 S6S-14 /14 S6S-14/13 S6S-14/12 S6S-14/11 S6S-14/10 S6S-14/09

160 140 120 100

S6S-14/08 S6S-14/07

300

80

S6S-14/06 S6S-14/05

60 150

40 20 0

0 0

2

4

6

8

10

12

14

16

18

Q - (m続/h) Q - (lps) 0 0

1

2

10

20

3

30

40

4 50

60

5 70

80

8 20 10

H - (m)

H - (fe et)

Q - (US gpm)

NPSHR CURVE

E F F IC IE N C Y ( %)

H - (m)

H - (feet)

STAINLES S STEEL SERIES

6

NPSHR

4 2

0

0 0

2

4

6

8

10

12

14

16

18

20

21

Q - (m続/h) Q - (lps) 1

0 0

10

3

2 20

30

40

** Optional outlet Size. Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.

5

4 50

60

70

6

80 90 Q - (US gpm)

100


Pumping trust. Worldwide.

Nominal Diameter : 6"

Nominal Flow : 14m 3/h

Outlet Size : 2"/2½"**

560 1800

1700

520

1600

480

1500

440 1400

1300

1200

Flow Range : 6 - 18 m³/h

S6S -1 S6S 4/50 -1 S6S 4/49 -1 S6S 4/48 S6S-14/47 S6S 14/46 S6S 14/45 -1 S6S 4/44 -14 S6S /43 -1 S6S 4/42 -1 4 S6S /41 -14 S6S /40 -14 S6S /39 -1 4 S6S /38 -1 S6S 4/37 -14/ 36 S6S -14 / 35 S6S -14/ 3 4 S6S -1 4 / 33

400

S6S-14 2900 rpm

80

h% 70 60 50 40

360

1100

320 1000

900

800

280

240

700

200 600

160 500

400

120 0

2

4

6

8

10

12

14

16

18

Q - (m³/h) Q - (lps) 0 0

E F F IC IE N C Y ( %)

1900

H - (m)

H - (feet)

STAINLES S STEEL SERIES

1 10

2 20

30

3 40

4 50

60

5 70

80

Q - (US gpm)

** Optional outlet Size. Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.


Pumping trust. Worldwide.

Nominal Diameter : 6"

Nominal Flow : 14m 3/h

Outlet Size : 2"/2½"**

STAINLES S STEEL SERIES DIMENSIONS & WEIGHT PUMP MODEL

REQUIRED MOTOR POWER kW

HP

22 22 22 22

30 30 30 30

*NO OF CABLE GUARD

DIMENSIONS (mm)

OD

RP

APPROX NETT. WEIGHT (kg)

H2

* 1 denotes Single Cable Guard (D.O.L - 3 wire) and 2 denotes Double Cable Guard (S.D - 6 wire). Please specify preference, while placing order.

** Optional outlet Size. Available types of materials of construction : S (S.S-304) and N (S.S-316). In case of M.O.C Type - N the third digit of the pump model "S" will be replaced with "N". The given performance curves are same for Type - S & N. In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

Nominal Diameter : 6"

Nominal Flow : 18m 3/h

Outlet Size : 2遜"

Flow Range : 7 - 24 m続/h

E F F IC IE N C Y ( %)

H - (feet)

H - (m)

STAINLES S STEEL SERIES S6S-18 2900 rpm

220 700

S6S-18 /18 S6S-18

200

/17

S6S-18 /1 600

180

6

h%

S6S-18

/15

80

S6S-18

/14 60

160

S6S-18 /1

500

3

S6S-18

/12

140

40

S6S-18 /11 400

20

S6S-18/10

120

S6S-18/09 100

S6S-18/08

300

S6S-18/07 80

S6S-18/06 200

S6S-18/05

60

S6S-18/04 S6S-18/03

40 100

20

0

0 0

2

4

6

8

10

12

14

16

18

20

22

24

Q - (m続/h) Q - (lps) 0

1

0

2

3

20

4

40

5

60

6

80

7 100

20

H - (m)

NPSHR CURVE

H- (feet)

Q - (US gpm)

8 6

NPSHR

4 10 2 0

0 0

4

8

12

16

20

24

28

Q - (m続/h) Q - (lps) 0 0

1

2 20

3 40

Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.

4 60

5 80

6

7 100 120 Q - (US gpm)

8


Pumping trust. Worldwide.

Nominal Diameter : 6"

Nominal Flow : 18m 3/h

Outlet Size : 2½"

560

S6S1 S6S-

520

S6S -

1650

440

900

80

h%

8/40 60

8/38

S6S -18/ 36 S6S -1 8 / 3 S6S-1 5 8/34 S6S-1 8/33 S6S-1 8/32 S6S-1 8/31 S6S-1 8/30 S6S-1 8/29 S6S-1 8/28 S6S-18 /27 S6S-18 /26 S6S-18 /25 S6S-18 /24 S6S-18/ 23 S6S-18/ 22 S6S-18/2 1 S6S-18/2 0 S6S-18/1 9

400

1050

4

8/42

S6S -1

1350

1200

18/4

S6S -1

1500

S6S-18 2900 rpm

18/46

S6S -1

480

Flow Range : 7 - 24 m³/h 8/48

E F F IC IE N C Y ( %)

1800

H - (m)

H - (feet)

STAINLES S STEEL SERIES

360

320

280

240 750

40

20

200 600

160

450

120 0

0

2

4

6

8

10

12

14

16

18

20

22

24

26

Q - (m³/h) Q - (lps) 0 0

1

2 20

3 40

4 60

5 80

6

7 100

Q - (US gpm)

Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.


Pumping trust. Worldwide.

Nominal Diameter : 6"

Nominal Flow : 18m 3/h

Outlet Size : 2½"

STAINLES S STEEL SERIES DIMENSIONS & WEIGHT PUMP MODEL

REQUIRED MOTOR POWER kW

HP

*NO OF CABLE GUARD

DIMENSIONS (mm)

OD

RP

APPROX NETT. WEIGHT (kg)

H2

* 1 denotes Single Cable Guard (D.O.L - 3 wire) and 2 denotes Double Cable Guard (S.D - 6 wire). Please specify preference, while placing order.

Available types of materials of construction : S (S.S-304) and N (S.S-316). In case of M.O.C Type - N the third digit of the pump model "S" will be replaced with "N". The given performance curves are same for Type - S & N. In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

Nominal Diameter : 6"

Nominal Flow : 22m /h

Outlet Size : 2½"/3"**

3

Flow Range : 9 - 29 m³/h

E F F IC IE N C Y ( %)

1200

H - (m)

H - (feet)

STAINLES S STEEL SERIES S6S-22 2900 rpm

350

1050

S6S-22 /2

8

300

900

250

750

200

S6S-22

/26

S6S-22

/25

S6S-22

/24

S6S-22

/23

S6S-22

/22

S6S-22

/21

S6S-22

/20

S6S-22

/19

S6S-22

/18

80

h%

60

40

20

S6S-22

/17 S6S-22/1 6

600

S6S-22/1 5 S6S-22/14

S6S-22/13

150

S6S-22/12

450

S6S-22/11 S6S-22/10

S6S-22/09

100

S6S-22/08

300

S6S-22/07 S6S-22/06 S6S-22/05 150

0

50

0 0

2

4

6

8

10

12

14

16

18

20

22

24

26

28

30

Q - (m³/h) Q - (lps) 0 0

1

2 20

3 40

4 60

5 80

6

7 100

8 120

Q - (US gpm) ** Optional outlet Size. Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.


Pumping trust. Worldwide.

Nominal Diameter : 6"

Nominal Flow : 22m /h 3

Outlet Size : 2½"/3"**

850

Flow Range : 9 - 29 m³/h

E F F IC IE N C Y ( %)

2400

H - (m)

H - (feet)

STAINLES S STEEL SERIES

S6S-22 2900 rpm

750 2250

650 2100

1950

1800

1650

h%

600

550

500

S6S2

2/50

S6S2

2/46

60

40

S6S-2

2/44

S6S-2 1550

80

S6S-2

450

2/42 2/40

20

S6S-2

2/38

S6S-2

1350

2/36 S6S-22/3 4

400 1200

S6S-22/3

2

350

S6S-22/3

0

1050

300 900

250 750

200 600

150 450

300

100

150

50

0

0 0

2

4

6

8

10

12

14

16

18

20

22

24

26

28

30

Q - (m³/h) Q - (lps) 0 0

1

2 20

3 40

4 60

5 80

6

7 100

8 120

Q - (US gpm) ** Optional outlet Size. Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.


Pumping trust. Worldwide.

Nominal Diameter : 6"

Nominal Flow : 22m /h 3

Outlet Size : 2½"/3"**

STAINLES S STEEL SERIES DIMENSIONS & WEIGHT PUMP MODEL

REQUIRED MOTOR POWER

*NO OF CABLE GUARD

DIMENSIONS (mm)

APPROX NETT. WEIGHT (kg)

OD

RP

H2

1

142

65/80

527

10.6

6

1

142

65/80

574

11.7

5.5

7.5

1/2

142/147

65/80

621

12.8

S6S-22/08

5.5

7.5

1/2

142/147

65/80

668

13.9

S6S-22/09

7.5

10

1/2

142/147

65/80

715

15.0

S6S-22/10

7.5

10

1/2

142/147

65/80

762

16.1

S6S-22/11

9.3

12.5

1/2

142/147

65/80

809

17.2

S6S-22/12

9.3

12.5

1/2

142/147

65/80

856

18.3

S6S-22/13

11

15

1/2

142/147

65/80

903

19.4

S6S-22/14

11

15

1/2

142/147

65/80

950

20.5

S6S-22/15

11

15

1/2

142/147

65/80

997

21.6

S6S-22/16

13

17.5

1/2

142/147

65/80

1044

22.7

S6S-22/17

13

17.5

1/2

142/147

65/80

1091

23.8

S6S-22/18

13

17.5

1/2

142/147

65/80

1138

24.9

S6S-22/19

15

20

1/2

142/147

65/80

1185

26.0

S6S-22/20

15

20

1/2

142/147

65/80

1232

27.1

S6S-22/21

15

20

1/2

142/147

65/80

1279

28.2

S6S-22/22

18.5

25

1/2

142/147

65/80

1326

29.3

S6S-22/23

18.5

25

1/2

142/147

65/80

1373

30.4

S6S-22/24

18.5

25

1/2

142/147

65/80

1420

31.5

S6S-22/25

18.5

25

1/2

142/147

65/80

1467

32.6

S6S-22/26

22

30

1/2

142/147

65/80

1514

33.7

S6S-22/28

22

30

1/2

142/147

65/80

1608

35.9

S6S-22/30

22

30

1/2

142/147

65/80

1702

38.1

S6S-22/32

26

35

1/2

142/147

65/80

1769

40.3

S6S-22/34

26

35

1/2

142/147

65/80

1890

42.5

S6S-22/36

26

35

1/2

142/147

65/80

1984

44.7

S6S-22/38

30

40

1/2

142/147

65/80

2078

46.9

S6S-22/40

30

40

1/2

142/147

65/80

2172

49.1

S6S-22/42

30

40

1/2

142/147

65/80

2266

51.3

S6S-22/44

37

50

1/2

142/147

65/80

2360

53.5

S6S-22/46

37

50

1/2

142/147

65/80

2454

55.7

S6S-22/50

37

50

1/2

142/147

65/80

2642

60.1

kW

HP

S6S-22/05

3.7

5

S6S-22/06

4.5

S6S-22/07

* 1 denotes Single Cable Guard (D.O.L - 3 wire) and 2 denotes Double Cable Guard (S.D - 6 wire). Please specify preference, while placing order. **Optional outlet Size.

Available types of materials of construction : S (S.S-304) and N (S.S-316). In case of M.O.C Type - N the third digit of the pump model "S" will be replaced with "N". The given performance curves are same for Type - S & N. In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

Nominal Diameter : 6"

Nominal Flow : 30m 3/h

Outlet Size : 3"

150

Flow Range : 6 - 36 m続/h 140

S6S-3 0

450

425

130

S6S-30 2900 rpm

/12

S6S-3 0

/11

400

120

S6S-3

E F F IC IE N C Y ( %)

475

H - (m)

H - (feet)

STAINLES S STEEL SERIES

h%

80

0/10

375

60

110

S6S-3

350

0/09 40

325

300

S6S-30/0 8 20

90

S6S-30/0

275

7

80 250

225

200

S6S-30/0

6

70

S6S-30/0

60

5

175

50

S6S-30/04

150

125

100

40

S6S-30/03

30

S6S-30/02 75

50

10 25

0

0 0

2

4

6

8

10

12

14

16

18

20

22

24

26

28

30

32

34

36

Q - (m続/h) Q - (lps) 0 0

1

2 20

3 40

4 60

5 80

6

7 100

8 120

9

10

140

Q - (US gpm) Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.


Pumping trust. Worldwide.

Nominal Diameter : 6"

Nominal Flow : 30m /h

Outlet Size : 3"

3

320

S6S-30

/27

S6S-30 /2

950

6

S6S-30

280 900

800

260

240

220 700

600

200

80

60

40

20

/1 7

S6S-30

/1 6

180

S6S-30 /

15

S6S-30

/14 S6S-30 /13

160 500

400

h%

S6S-30

550

450

/25

S6S-30 /24 S6S-30 /23 S6S-30 /22 S6S-30 /21 S6S-30 /20 S6S-30 /19 S6S-30 /18

750

650

S6S-30 2900 rpm

S6S-30

300

850

Flow Range : 6 - 36 m続/h

/28

E F F IC IE N C Y ( %)

1000

H - (m)

H - (feet)

STAINLES S STEEL SERIES

140

120

350

100 300 250

200

80

60

150

40 100

20 50

0

0 0

2

4

6

8

10

12

14

16

18

20

22

24

26

28

30

32

34

36

Q - (m続/h) Q - (lps) 0 0

1

2 20

3 40

4 60

5 80

6

7 100

8 120

9

10

140

Q - (US gpm)

Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.


Pumping trust. Worldwide.

Nominal Diameter : 6"

Nominal Flow : 30m /h

Outlet Size : 3"

3

STAINLES S STEEL SERIES DIMENSIONS & WEIGHT PUMP MODEL

REQUIRED MOTOR POWER kW

HP

*NO OF CABLE GUARD

DIMENSIONS (mm)

OD

RP

APPROX NETT. WEIGHT (kg)

H2

* 1 denotes Single Cable Guard (D.O.L - 3 wire) and 2 denotes Double Cable Guard (S.D - 6 wire). Please specify preference, while placing order.

Available types of materials of construction : S (S.S-304) and N (S.S-316). In case of M.O.C Type - N the third digit of the pump model "S" will be replaced with "N". The given performance curves are same for Type - S & N. In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

Nominal Diameter : 6"

Nominal Flow : 30m /h

Outlet Size : 3"

3

Flow Range : 6 - 36 m続/h S6S-30 2900 rpm

600

E F F IC IE N C Y ( %)

2000

H - (m)

H - (feet)

STAINLES S STEEL SERIES

1900 560 1800

1700

1600

h%

520

80

480

60

S6S-30/43 1500 440

40

S6S-30/40

1400

S6S-30/38 1300

400

20

S6S-30/35 1200

S6S-30/34

360

S6S-30/32 1100

S6S-30/31 320

S6S-30/29

1000

900

800

280

240

700 200 600

500

400

160

120

300 80 200 40 100

0

0 0

2

4

6

8

10

12

14

16

18

20

22

24

26

28

30

32

34

36

Q - (m続/h) Q - (lps) 0 0

1

2 20

3 40

4 60

5 80

6

7 100

8 120

9

10

140

Q - (US gpm)

Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.


Pumping trust. Worldwide.

Nominal Diameter : 6"

Nominal Flow : 30m /h

Outlet Size : 3"

3

STAINLES S STEEL SERIES DIMENSIONS & WEIGHT PUMP MODEL

REQUIRED MOTOR POWER

*NO OF CABLE GUARD

DIMENSIONS (mm)

APPROX NETT. WEIGHT (kg)

OD

RP

H2

1/2

142/147

80

3074

61.8

35

1/2

142/147

80

3266

65.7

30

40

1/2

142/147

80

3362

68.7

S6S-30/34

30

40

1/2

142/147

80

3554

71.6

S6S-30/35

30

40

1/2

142/147

80

3650

73.5

S6S-30/38

37

50

1/2

142/147

80

3938

79.4

S6S-30/40

37

50

1/2

142/147

80

4130

83.3

S6S-30/43

37

50

1/2

142/147

80

4418

89.1

kW

HP

S6S-30/29

26

35

S6S-30/31

26

S6S-30/32

* 1 denotes Single Cable Guard (D.O.L - 3 wire) and 2 denotes Double Cable Guard (S.D - 6 wire). Please specify preference, while placing order.

Available types of materials of construction : S (S.S-304) and N (S.S-316). In case of M.O.C Type - N the third digit of the pump model "S" will be replaced with "N". The given performance curves are same for Type - S & N. In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

Nominal Diameter : 6"

Nominal Flow : 48m /h

Outlet Size : 3"/4"**

3

H (m)

H (Feet)

STAINLES S STEEL SERIES S6S - 48 / 13

Flow Range : 6 - 62 m続/h

S6S - 48 50Hz 2900 RPM

S6S - 48 / 12

160 500

S6S - 48 / 11

h%

140

80

S6S - 48 / 10 60

S6S - 48 / 09

120

40

EFFICIENCY (%)

400

S6S - 48 / 08 100

S6S - 48 / 07 300

S6S - 48 / 06

80

S6S - 48 / 05 200

60

S6S - 48 / 04

S6S - 48 / 03

40

100

S6S - 48 / 02 20

S6S - 48 / 01

0

0 0

4

8

12

16

20

24

28

32

36

40

44

48

52

56

60

64

Q - (m続 /Hr) Q - (lps) 0

0

1

2 20

3 40

4

5

60

6

80

7 100

8

9

120

10

140

11

160

12 180

13 200

14 220

15 240

16

17 260

18 280

30

20

H- (m)

NPSHR CURVE

H- (feet)

Q - (US gpm)

10 8

NPSHR

6 4

10 2 0

0 0

0 0

8

2

16

4 40

24

6 80

32

8 120

40

10 160

** Optional outlet Size. Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.

48

12 200

56

14

16 240

64

18 280

72 80 Q - (m続 /h) Q - (lps) 20 22 320 360 Q - (US gpm)


Pumping trust. Worldwide.

Nominal Diameter : 6"

Nominal Flow : 48m /h

Outlet Size : 3"/4"**

3

Flow Range : 6 - 62 m続/h

400

1200

350

1000

300

S6S-48

/28

S6S-48

/27

S6S-48

/26

S6S-48

/25

S6S-48

/24

S6S-48

/23

E F F IC IE N C Y ( %)

H - (feet)

H - (m)

STAINLES S STEEL SERIES S6S-48 2900 rpm

h%

80

S6S-4 8

/22 S6S-48 /21 S6S-48/20

60

40

S6S-48/19 S6S-48/18

250 800

S6S-48/17

S6S-48/16 S6S-48/15 200

S6S-48/14 600

150

400

100

200

50 0

4

8

12

16

20

24

28

32

36

40

44

48

52

56

60

64

Q - (m続/h) Q - (lps) 0 0

1

2 20

3 40

4 60

5 80

6 100

7

8 120

9 140

10 160

11 180

12

13 200

14 220

15 240

16

17

260

18 280

Q - (US gpm)

** Optional outlet Size. Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.


Pumping trust. Worldwide.

Nominal Diameter : 6"

Nominal Flow : 48m 3/h

Outlet Size : 3"/4"**

STAINLES S STEEL SERIES

PUMP MODEL

REQUIRED MOTOR POWER kW

HP

*NO OF CABLE GUARD

DIMENSIONS (mm)

OD

RP

APPROX NETT. WEIGHT (kg)

H2

80/100 80/100 80/100 80/100 80/100 80/100 80/100 80/100 80/100 80/100 80/100 80/100 80/100 80/100 80/100 80/100 80/100 80/100 80/100 80/100 80/100 80/100 80/100 80/100 80/100 80/100

80/100 80/100

* 1 denotes Single Cable Guard (D.O.L - 3 wire) and 2 denotes Double Cable Guard (S.D - 6 wire). Please specify preference, while placing order. **Optional outlet Size.

Available types of materials of construction : S (S.S-304) and N (S.S-316). In case of M.O.C Type - N the third digit of the pump model "S" will be replaced with "N". The given performance curves are same for Type - S & N. In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

Nominal Diameter : 6"

Nominal Flow : 60m 3/h

Outlet Size : 3"/4"**

200

S 6S

600

14

S6S -6

180

Flow Range : 15 - 80 m続/h

-60/

S6S -6

S6S-60 2900 rpm

0/13

h%

0/12

E F F IC IE N C Y ( %)

H - (feet)

H - (m)

STAINLES S STEEL SERIES

80

160

60

500

S6S -6

40

S6S-6

140

400

0/11 0/10

20

0

S6S-6

0/09

120

S6S-6

0/08

100

S6S-60/07

300

S6S-60/06

80

S6S-60/05 200

60

S6S-60/04

S6S-60/03

40 100

S6S-60/02 20

0

0 0

10

20

30

40

50

60

70

80

Q - (m続/h) Q - (lps) 0 0

2

4

6

50

8

10

100

12

150

14

16

200

18

250

20 300

22

24

350

30

20

10 H- (m)

NPSHR CURVE

H- (feet)

Q - (US gpm)

8

NPSHR

6 4

10

2 0

0

10

0 0

2

20

4 50

6 100

30

8

40

10 150

50

12 200

14

60

16 250

70

18

20 300

80 90 Q - (m続 /h) Q - (lps) 22 24 350 Q - (US gpm)

** Optional outlet Size. Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.


Pumping trust. Worldwide.

Nominal Diameter : 6"

Nominal Flow : 60m 3/h

Outlet Size : 3"/4"**

300

Flow Range : 15 - 80 m続/h S6S -6

900

S6 S -60/1 9

270

S6S-6 0 800

700

S6S-60 2900 rpm

0/20

240

210

/18

S6S6

0/17

S6S6

0/16

S6S6

0/15

h%

E F F IC IE N C Y ( %)

H - (feet)

H - (m)

STAINLES S STEEL SERIES

80

60

40

20

0 600

500

180

150

400

120

300

90

200

60

100

30

0

0 0

10

20

30

40

50

60

70

80

Q - (m続/h) Q - (lps) 0

2

0

4 50

6 100

8

10 150

12

14 200

16 250

18

20 300

22

24

350

Q - (US gpm) ** Optional outlet Size. Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.


Pumping trust. Worldwide.

Nominal Diameter : 6"

Nominal Flow : 60m /h

Outlet Size : 3"/4"**

3

STAINLES S STEEL SERIES DIMENSIONS & WEIGHT PUMP MODEL

REQUIRED MOTOR POWER kW

HP

*NO OF CABLE GUARD

DIMENSIONS (mm)

OD

RP

APPROX NETT. WEIGHT (kg) H2

* 1 denotes Single Cable Guard (D.O.L - 3 wire) and 2 denotes Double Cable Guard (S.D - 6 wire). Please specify preference, while placing order. **Optional outlet Size.

Available types of materials of construction : S (S.S-304) and N (S.S-316). In case of M.O.C Type - N the third digit of the pump model "S" will be replaced with "N". The given performance curves are same for Type - S & N. In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

Nominal Diameter : 8"

Nominal Flow : 78m /h

Outlet Size : 4"/5"**

3

220

Flow Range : 20 - 100 m続/h S8S -7

680

S8S-78 2900 rpm

8/10

200 640

h%

S8S-78

600

/09

180

E F F IC IE N C Y ( %)

720

H - (m)

H - (feet)

STAINLES S STEEL SERIES

80

560

60

S8S-78 520

/08

160

480

40

S8S-78

/07

140 440

400

120

S8S-78/06

100

S8S-78/05

360

320

280

S8S-78/04 80

240

200

60

S8S-78/03

40

S8S-78/02

20

S8S-78/01

160

120

80

40

0

0

0

10

20

30

40

50

60

70

80

90

100

Q - (m続/h) Q - (lps) 0 0

2

4 40

6 80

8

10

120

12

160

14 200

16

18

240

20

280

22

320

24 360

26 400

28 440

30

20

10 H- (m)

NPSHR CURVE

H- (feet)

Q - (US gpm)

8

NPSHR

6 4

10

2 0

0

10

0 0

2

20

4 50

6 100

30

8

40

10 150

50

12 200

14

60

16 250

70

18

20 300

80 90 Q - (m続 /h) Q - (lps) 22 24 350 Q - (US gpm)

** Optional outlet Size. Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.


Pumping trust. Worldwide.

Nominal Diameter : 8"

Nominal Flow : 78m 3/h

Outlet Size : 4"/5"**

450

Flow Range : 20 - 100 m続/h S8S-78 2900 rpm

1400

S8S-78/20 1300

400

S8S-78/19

h%

S8S-78/18

E F F IC IE N C Y ( %)

1500

H - (m)

H - (feet)

STAINLES S STEEL SERIES

80

1200

S8S-78/17 350

60

S8S-78/16

1100

40

S8S-78/15 1000

300

S8S-78/14 S8S-78/13

900

S8S-78

/12

250 800

S8S-78/11 700 200 600

500

150

400

100 300

200 164

50

0

10

20

30

40

50

60

70

80

90

100

Q - (m続/h) Q - (lps) 0 0

2

4 40

6 80

8 120

10 160

12

14 200

16 240

18 280

20 320

22

24 360

26 400

28 440

Q - (US gpm) ** Optional outlet Size. Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.


Pumping trust. Worldwide.

Nominal Diameter : 8"

Nominal Flow : 78m 3/h

Outlet Size : 4"/5"**

STAINLES S STEEL SERIES DIMENSIONS & WEIGHT PUMP MODEL

REQUIRED MOTOR POWER kW

HP

*NO OF CABLE GUARD

DIMENSIONS (mm)

OD

RP

APPROX NETT. WEIGHT (kg) H2 562

24.5

690

27.70

818

30.90

946

34.10

1074

37.30

1202

40.50

1330

43.70

1458

46.90

1586

50.10

1714

53.30

1842

56.50

1970

59.70

2098

62.90

2226

66.10

2354

69.30

2482

72.50

2610

75.70

2738

78.90

2866

82.10

2994

85.30

* 1 denotes Single Cable Guard (D.O.L - 3 wire) and 2 denotes Double Cable Guard (S.D - 6 wire). Please specify preference, while placing order.

** Optional outlet Size. Available types of materials of construction : S (S.S-304) and N (S.S-316). In case of M.O.C Type - N the third digit of the pump model "S" will be replaced with "N". The given performance curves are same for Type - S & N. In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

Nominal Diameter : 8"

Nominal Flow : 95m /h

Outlet Size : 5"

3

Flow Range : 40 - 126 m続/h

S8S-95 2900 rpm

750 220

S8S -

200

S8 S -9 5 / 09

95/1

0

700

650

h%

E F F IC IE N C Y ( %)

800

H - (m)

H - (feet)

STAINLES S STEEL SERIES

80

60 600

S 8 S -9

180

5/08 40

550 160

S8S-95/0

7

500

450

400

20

140

S8S-95/0

6

0

120

S8S-95/ 05 350 100

S8S-95/0

300

4

80 250

S8S-95/03 200

60

S8S-95/02

150 40 100

S8S-95/01 20 50

0

0

0

20

40

60

80

100

120

Q - (m続/h) Q - (l/s) 0

5

0

10

15

100

20

200

25

300

400

30

35 500

10 30 20

H- (m)

NPSHR CURVE

H- (feet)

Q - (US gpm)

8 6

NPSHR

4 10 2 0

0

0

0 0

10

2 40

20

4

6 80

30

8 120

40

10 160

50

12 200

Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.

14

60

16 240

70

18 280

20 320

80

22 360

90

24

100 Q - (m続 /h) Q - (lps) 26 28

400 440 Q - (US gpm)


Pumping trust. Worldwide.

Nominal Diameter : 8"

Nominal Flow : 95m /h

Outlet Size : 5"

3

Flow Range : 40 - 126 m続/h S8S -

450

S8S -95/ 1

1400

S8S 1300

400

95/1

S8S -

1200 350 1100

1000

95/2

300

95/1

9

h%

8

80

7 60

6

S8S -95/ 1

5

S8S -95/ 1

4

S8S -95/ 1

3

40

20

95/1

S8S-9 5

250

0

S8S -95/ 1

S8S -

900

S8S-95 2900 rpm

0

2

/11

800

700 200 600

500

150

400

100 300

200 50

0

20

40

60

80

100

120

Q - (m続/h) Q - (l/s) 0 0

E F F IC IE N C Y ( %)

H - (feet)

H - (m)

STAINLES S STEEL SERIES

5

10 100

15 200

20 300

25 400

30

35 500

Q - (US gpm)

Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.


Pumping trust. Worldwide.

Nominal Diameter : 8"

Nominal Flow : 95m /h

Outlet Size : 5"

3

STAINLES S STEEL SERIES DIMENSIONS & WEIGHT PUMP MODEL

REQUIRED MOTOR POWER kW

HP

*NO OF CABLE GUARD

DIMENSIONS (mm)

OD

RP

APPROX NETT. WEIGHT (kg) H2

* 1 denotes Single Cable Guard (D.O.L - 3 wire) and 2 denotes Double Cable Guard (S.D - 6 wire). Please specify preference, while placing order.

Available types of materials of construction : S (S.S-304) and N (S.S-316). In case of M.O.C Type - N the third digit of the pump model "S" will be replaced with "N". The given performance curves are same for Type - S & N. In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

Nominal Diameter : 10"

Nominal Flow : 125m 3/h

Outlet Size : 6"

320

Nominal Flow 18 - 162 m続/h

S10S-125 50Hz 2900 RPM

300

960 S10S-125/10R 280 880

S10S-125/09

h%

260 800

EFFICIENCY (%)

1040

H - (m)

H - (feet)

STAINLES S STEEL SERIES

80

S10S-125/08R 60

240

720

S10S-125/08RR

220

40

S10S-125/07 640

20

200 S10S-125/06

0

180 560 160

S10S-125/05

140

S10S-125/05R

480

400

320

S10S-125/04 120

S10S-125/04R

S10S-125/03

100

80 240 S10S-125/02 60 160 40

S10S-125/01

80 20

0

0 0 0 0

40

20 5

60

10 100

15 200

100

80 20 300

Refer General Information for performance curve conditions and for other details. Curve tolerance according to ISO : 9906, Annex - A.

25 400

120 30

140 35

500

40 600

160

180 Q - (m続 /Hr) Q - (lps) 45 50

700 Q - (US gpm)


Pumping trust. Worldwide.

Nominal Diameter : 10"

Nominal Flow : 125m /h

Outlet Size : 6"

3

STAINLES S STEEL SERIES DIMENSIONS & WEIGHT

REQUIRED MOTOR POWER

30

H - (m)

H - (feet)

PUMP MODEL

No. OF CABLE GUARD

kW

HP

S10S-125/01

11

15

S10S-125/02

22

S10S-125/03

DIMENSIONS (mm)

APPROX NETT. WEIGHT (kg)

OD

RP

H2

1/2

210.0

150

644

29.95

30

1/2

210.0

150

798

36.0

30

40

1/2

210.0

150

952

42.05

S10S-125/04R**

37

50

1/2

210.0

150

1106

48.10

S10S-125/04

45

60

1/2

210.0

150

1106

48.10

S10S-125/05R**

45

60

1/2

210.0

150

1260

54.15

S10S-125/05

55

75

1/2

210.0

150

1260

54.15

S10S-125/06

63

85

1/2

210.0

150

1414

60.20

S10S-125/07

75

100

1/2

210.0

150

1568

66.25

S10S-125/08R

75

100

1/2

210.0

150

1722

72.30

S10S-125/08RR**

75

100

1/2

210.0

150

1722

72.30

S10S-125/09

93

125

1/2

210.0

150

1876

78.35

S10S-125/10R**

93

125

1/2

210.0

150

2030

84.40

8

20 4

NPSHR

10

NPSHR CURVE 0

0 20

0

40

60

80

100

120

140

160

180

Q - (m続 /Hr) Q - (lps) 0 0

5

10 100

15 200

20 300

25 400

30

35 500

40 600

45

50

700

Q - (US gpm)

* 1 denotes Single Cable Guard (D.O.L - 3 wire) and 2 denotes Double Cable Guard (S.D - 6 wire). Please specify preference, while placing order. ** In pump model last digit R denoted redced impeller O.D and RR denotes further reduced impeller O.D.

Available types of materials of construction : S (S.S-304) and N (S.S-316). In case of M.O.C Type - N the third digit of the pump model "S" will be replaced with "N". The given performance curves are same for Type - S & N. In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


C.R.I. 4” & 6” RESIN FILLED ENCAPSULATED & 4”, 6”, 8” & 10” WATER FILLED REWINDABLE SUBMERSIBLE MOTORS


Pumping trust. Worldwide.

SUBMERSIBLE MOTORS

'R' Series Motors These motors are hermetically sealed, encapsulated and water lubricated type with removable cable lead out. The stator windings are of enameled copper wire and the wound stator is mounted in a stainless steel shell and is completely protected by a stainless steel cylinder and stator room is pre-filled with resin. The resin filled in the space between the stator & the stainless steel cylinder dissipates heat quickly resulting in longer motor life. Except stator, other portions of the motor is pre-filled with deionised water containing propylene glycol (anti-freeze agent) which serves as coolant & lubricant for rotor, bushes and thrust bearing. If any leakage of water is observed bring to the notice of the distributor. Dynamically balanced rotors of these motors maintain uniform clearance there by giving better efficiency and increase the life cycle of the water lubricated bush bearings. Specially designed high performance thrust bearings are used that can withstand high axial thrust loads and upthrust loads with minimum wear and tear. The unique design of thrust bearings creates a wedge of water between the shoe and the disc and there by it gives better water lubrication and increases the life cycle of the thrust bearings. Pressure equalizing rubber diaphragm is provided to guard the pressure and volume variations due to thermal expansion of the water inside the motor. Motor sealing are made by means of ‘O’ rings, shaft seals and sand guard to avoid ingress of well water, sand and fiber particles into the motor. Care should be taken to ensure that the motor does not run when it is not submerged in the water. To prevent the motor dry running, install water level monitor / dry run preventor. The motor needs a constant flow of water past it’s body to keep it at correct operating temperature. Ideally, the motor should be set just below the level at which water enters the bore well. When this level is not ascertained, fit a “flow inducer pipe” over the pumpset to ensure adequate cooling. It is mandatory to install C.R.I Control box for all single phase 3 wire motors. All 3 Ph motors require an adequate motor protection control panel. Mounting dimensions of motors are in accordance with NEMA standards. Features l l l

l l l

Corrosive resistant stainless steel body. Specially designed thrust bearing to withstand high axial thrust loads. Copper rotors and low watt loss silicon steel laminations for higher starting torque. Higher power factor resulting in lesser power consumption. Larger shaft diameter for better power transmission. High heat dissipation for better life cycle.

Applications These prime mover submersible motors are suitable to couple with deepwell submersible pumpends used for l l l

Irrigation, Domestic water supply Fountains Industrial water supply

l l l

Pressure boosting units Ponds, Gardens Sprinkler systems and mining

101


COMMITMENT

RELIABILITY

Pumping trust. Worldwide.

INNOVATION

RESIN FILLED ENCAPSULATED SUBMERSIBLE MOTORS Nominal Diameter : 4"

"R" Series

Cross Sectional Drawing

MOTOR CROSS SECTIONAL DRAWING 2 - Wire

MOTOR CROSS SECTIONAL DRAWING 3 - Wire

In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

RESIN FILLED ENCAPSULATED SUBMERSIBLE MOTORS

Nominal Diameter : 4"

"R" Series

Cross Sectional Drawing 4" ENCAPSULATED MOTOR (3HP & ABOVE) 3 - Wire

Part No. 30.01 31.01 32.01 32.02 32.03 33.01 34.01 35.01 36.01 37.02

Part Name Spline Protector and sand slinger Removable Lead connector plug Lightening arrestor Hermetically Sealed Resign Filled Stator Windings Rotor Stainless Steel Exterior Construction Self-Aligning Kingsbury - Type Thrust Bearing Pressure Equalizing Diaphragm Built in Capacitor Capacitor Chamber

In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


COMMITMENT

RELIABILITY

Pumping trust. Worldwide.

INNOVATION

RESIN FILLED ENCAPSULATED SUBMERSIBLE MOTORS Nominal Diameter : 4"

"R" Series

Specifications Nominal Dia Maximum Outer Diameter Power Range

Speed Versions Class of Insulation Degree of Protection Direction of Rotation Type of Duty Down Thrust Load Minimum Cooling Flow Along the Motor Maximum Temperature of Liquid Starts per Hour Shaft Mounting Standard Method of Starting

Cable Leadout

4" (100mm) 96 mm (max.) 0.37 kW to 1.1 kW - Single Phase 2 wire 0.37 kW to 2.2 kW - Single 3 wire Incorporated with Thermal Protector upto 1.1 kW Incorporated with Lightening arrestor upto 1.5 kW 0.37 kW to 5.5 kW - Three phase 3 wire 2900 rpm Single Phase - 230 V, 50 Hz, A.C. Supply Three Phase - 415 V, 50 Hz, A.C. Supply F IP 68 CCW - Single Phase Electrically Reversible - Three Phase S1 (continuous) 0.37 kW to 1.5 kW - 650 lbs / 3000N 2.2 kW to 5.5 kW - 1500lbs / 6500N 0.15 m/sec 33OC 20 times Splined as per NEMA standard NEMA Standard Single Phase - Capacitor Start Capacitor Run (CSCR) Permanent Split Capacitor (PSC) Three Phase - Direct On Line (DOL) 2 & 3 Wire Removable type EPDM rubber flat Cable

Material of Construction Type-A

Part Name Housings Shell

S.S - 304

Stator Shell

S.S - 304

Thrust Pad

Carbon Graphite

Thrust Base

S.S. - 420

'O' Ring

Nitrile rubber (NBR)

Diaphragm

Nitrile rubber (NBR)

Motor Base

S.S. - 304

Capacitor Chamber

Thermoplastic (2 Wire)

In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.

3 Wire 2 Wire


Pumping trust. Worldwide.

RESIN FILLED ENCAPSULATED SUBMERSIBLE MOTORS

Nominal Diameter : 4"

"R" Series

Technical Data PCD 76.20

+0.00 -0.20

2 WIRE MOTORS 38.1 Max. Dia

4� SINGLE PHASE 230 V 2 WIRE MOTORS

38.04 - 38.30

15.8623 - 15.887

12.7

5 / 16 - 24UNF 2A (4 Nos)

Motor Models

Ampearage Motor Power Full Load Starting Current (kW) Max.(A)

Eff.%

Power Factor

Max. Down Thrust Load (N)

Full load

20.06 - 24.63

11.176

3.175 - 3.429

(A)

Starting Torque Torque (Nm) (Nm)

Cable leadouts Cable Size (Sq.mm)

Cable Length (m)

R4A-03M 0.37

4

13

58

0.7

3000

2.1

1.2

1.5

1.5

R4A-05M 0.55

6

20

60

0.7

3000

2.9

1.8

1.5

1.5

R4A-07M 0.75

7.5

25

62

0.72

3000

4

2.5

1.5

1.5

9

35

65

0.81

3000

5.7

3.7

1.5

1.5

87.25 - 87.3

R4A-11M

1.1

96 Max dia

H1 (Height)

D

DIMENSIONS AND WEIGHT FOR 2 WIRE MOTORS Motor Models

Motor Power

Dimension (mm)

Nett Weight (Kg) (Approx.)

kW

HP

D

H1

R4A-03M

0.37

0.5

96

432

10.95

R4A-05M

0.55

0.75

96

447

11.9

R4A-07M

0.75

1

96

472

12.95

R4A-11M

1.1

1.5

96

512

15.3

2 - Wire Motor

Dimensional Drawing

All dimensions are in mm Splined shaft 14 Teeth - module 1.5875 O Pressure angle 30 A.N.S.I.B - 92 - 1 - 1970 Coupling Class 5

METHOD OF CONNECTION : M - 1P / 230V / 2 Wire / Permanent Split Capacitor Type (PSC)

In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


COMMITMENT

RELIABILITY

Pumping trust. Worldwide.

INNOVATION

RESIN FILLED ENCAPSULATED SUBMERSIBLE MOTORS Nominal Diameter : 4"

"R" Series

Technical Data PCD Ø76.20

+0.00 -0.20

3 WIRE MOTORS 4” SINGLE PHASE 230 V 3 WIRE MOTORS Motor Models Single Phase

Ampearage Motor Power Full Load Starting Current (kW) Max.(A)

Full load Eff.%

Power Factor

(A)

38.1 Max. Dia

12.7

5/16 - 24UNF 2A (4 Nos)

11.176

3.175 - 3.429

38.04 - 38.30

15.8623 - 15.887

Max. Starting Down Torque Thrust (Nm) Load (N)

Torque (Nm)

Cable leadouts Cable Size (Sq.mm)

Cable Length (m)

R4A-03S

0.37

4

13

58

0.7

3000

2.1

1.2

1.5

1.5

R4A-05S

0.55

6

20

60

0.7

3000

2.9

1.8

1.5

1.5

R4A-07S

0.75

7.5

25

62

0.72

3000

4

2.5

1.5

1.5

R4A-11S

1.1

9

35

65

0.81

3000

5.7

3.7

1.5

1.5

R4A-15S

1.5

11.2

45

68

0.86

3000

7.8

5.0

1.5

1.5

R4A-22S

2.5

16

66

68

0.88

6500

13.5

7.5

2.5

2

4” THREE PHASE 415 V 3 WIRE MOTORS 20.06 - 24.63

Motor Models

87.25 - 87.3

96 Max dia

H1 (Height)

D

Ampearage

Full load

Max. Down Thrust Load (N)

Starting Torque Torque (Nm) (Nm)

Three Phase

Motor Power (kW)

Full Load Max.(A)

R4A-03T

0.37

1.5

5

62 0.69

3000

2.3

R4A-05T

0.55

2.0

6.8

69.5 0.72

3000

6

R4A-07T

0.75

2.5

9.5

70 0.75

3000

R4A-11T

1.1

3.5

13.5

73 0.74

R4A-15T

1.5

4.6

18

R4A-22T

2.2

6.3

R4A-30T

3.0

8.4

42

R4A-37T

3.7

8.4

R4A-40T

4

R4A-55T

5.5

Starting Current (A)

Cable lead outs Cable Size (Sq.mm)

Cable Length (m)

1.2

1.5

1.5

1.8

1.5

1.5

7.4

2.5

1.5

1.5

3000

9.8

3.7

1.5

1.5

73 0.75

3000

12.3

4.9

1.5

1.5

28.5 74.5 0.75

6500

18.9

7.4

1.5

2

74 0.75

6500

30.8

10

2.5

2

45

75 0.77

6500

31.4

12.3

2.5

2

10.3

53

76 0.77

6500

37.2

13.75

2.5

2

14.0

72

74 0.75

6500

52.5

18.7

2.5

2.5

Eff.%

Power Factor

* METHOD OF CONNECTION : S - 1P / 3 Wire / 230 V / Capacitor Start Capacitor Run (CSCR) T - 1P / 3 Wire / 415 V / D.O.L.

DIMENSIONS AND WEIGHT FOR 3 WIRE MOTORS Motor Models Single Phase

Three Phase

kW

Dimensional Drawing

All dimensions are in mm Splined shaft 14 Teeth - module 1.5875 Pressure angle 30O A.N.S.I.B - 92 - 1 - 1970 Coupling Class 5

H1

Nett Weight (Kg) (Approx.)

HP

D

R4A-03S R4A-03T 0.37

0.5

96

288

313

11.5

11.3

R4A-05S R4A-05T 0.55

0.75

96

303

333

12.5

12.4

Single Phase Three Phase Single Phase Three Phase

1

96

328

353

13

13.5

R4A-11S R4A-11T

1.1

1.5

96

368

383

15

15.6

R4A-15S R4A-15T

1.5

2

96

411.0

408

16.6

17

R4A-22S R4A-22T

2.2

3

96

602

458

23

23.5

3.7

5

96

NA

735

NA

32.1

R4A-07S R4A-07T 0.75

3 - Wire Motor

Dimension (mm)

Motor Power

NA

R4A-37T

NA

R4A-40T

4

5.5

96

NA

765

NA

32.1

NA

R4A-55T

5.5

7.5

96

NA

865

NA

33

"NA" denotes not available.

In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

RESIN FILLED ENCAPSULATED SUBMERSIBLE MOTORS

Nominal Diameter : 6"

"R" Series

Cross Sectional Drawing

Part No. 10.01 10.03 10.05 10.06 10.07 10.08 10.11 10.12 10.14 11.01 11.02

Part Name Sand Guard Water Filling Plug Bush Upper Housing Nut Stud Mechanical seal Upper Housing Gasket Seal Guide Sleeve Stator Stator Winding

Part No. 11.03 11.04 12.01 12.02 12.03 12.04 13.01 13.03 13.04 14.02 14.03

Part Name Cable Cable Connector Sleeve Rotor Circlip Counter Thrust Pad Teflon Ring Lower Housing Tie Bolt / Tie Rod Lower Housing Gasket Thrust Bearing Pad Thrust Bearing Base

Part No. 14.05 14.06 14.07 15.01 15.02 15.03 15.04 15.05 15.07 15.08 15.09

Part Name Rocker Screw Rocker Screw Nut Pad Key Motor Base Diaphragm Doom Nut "O" Ring S.S Shell Motor Base Inner Plate Diaphragm Spring Spring Guide Plate

In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


COMMITMENT

RELIABILITY

Pumping trust. Worldwide.

INNOVATION

RESIN FILLED ENCAPSULATED SUBMERSIBLE MOTORS Nominal Diameter : 6"

"R" Series

Specifications Nominal Dia

6� (150 mm)

Maximum Outer Diameter

143 mm

Power Range

5.5kW to 22kW

Speed

2900 rpm

Version

415V - 50Hz, A.C. Supply

Class of Insulation

F

Degree of Protection

IP 68

Direction of Rotation

Electrically Reversible - Three Phase

Type of Duty

S1 (continuous)

Down Thrust Load

3500lbs / 15500N

Minimum Cooling Flow Along the Motor

0.15 m/sec

Maximum Temperature of Liquid

330C

Starts per Hour

20 times

Shaft

Splined as per NEMA standard

Mounting Standard

NEMA standard

Method of Starting

5.5kW to 22kW Direct On line (D.O.L)

Cable Leadout

Removable type 3/4 core EPDM Rubber flat cable

Material of Construction Type-A

Part Name Shaft Seal

Carbon Ceramic

Housing Shell

S.S. - 304

Stator Shell

S.S. - 304

Thrust Pad

Carbon Graphite

Thrust Base

S.S - 420

Diaphragm

Nitrile Rubber (NBR)

Motor Base

S.S. - 304

In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

RESIN FILLED ENCAPSULATED SUBMERSIBLE MOTORS

Nominal Diameter : 6

"R" Series

Technical Data 60.0

57.0

PCD Ø 111

76.20 h 7

6” THREE PHASE 415 V 3 WIRE MOTORS

25.0 h 8

Three Phase

23.0

73.0

Motor Models

Ampearage Motor Power Full Load Starting Current (kW) Max.(A)

Full load Eff.%

(A)

6.0

143 Max dia

Power Factor

Max. Starting Down Torque Thrust (Nm) Load (N)

Torque (Nm)

Cable leadouts Cable Size (Sq.mm)

Cable Length (m)

R6B-55T

5.5

10

71

79 0.82 3500

31

18.30

2.5

3

R6B-75T

7.5

13

86

80 0.83 3500

48

24.87

2.5

3

R6B-93T

9.3

15

118

81 0.82 3500

61

30.84

4

3

R6B-110T

11

19

136

82 0.84 3500

80

36.48

4

3

R6B-130T

13

20

147

82 0.87 3500

92

43.31

4

3

R6B-150T

15

23.5

157

83 0.84 3500

104

49.75

6

3

R6B-185T

18.5

30

206

83 0.83 3500

150

61.36

6

3

R6B-220T

22

34

250

83 0.85 3500

170

72.96

6

3

H1 (Height)

D

DIMENSIONS AND WEIGHT FOR 3 WIRE MOTORS Motor Power Motor Models

Dimensional Drawing

D

Dimension (mm) H1

Nett Weight (Kg) (Approx.)

7.5

143

749

48

7.5

10

143

808

56

kW

HP

R6B-55T

5.5

R6B-75T R6B-93T

9.3

12.5

143

858

58.6

R6B-110T

11

15

143

923

69

R6B-130T

13

17.5

143

958

71.5

R6B-150T

15

20

143

1003

76.5

R6B-185T

18.5

25

143

1087

82.2

R6B-220T

22

30

143

1147

93

All dimensions are in mm Splined shaft 15 Teeth - module 1.5875 Pressure angle 30O A.N.S.I.B - 92 - 1 - 1970 Coupling Class 5

In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


COMMITMENT

RELIABILITY

Pumping trust. Worldwide.

INNOVATION

WATER FILLED REWINDABLE SUBMERSIBLE MOTORS Nominal Diameter : 4", 6", 8" & 10"

"W" Series

Description These motors are eco-friendly wet type, water filled rewindable. The stator windings are of water proof synthetic film insulated copper winding wires. It features water lubricated thrust and journal bearings. Motor is pre-filled with clear, cold, pure, fresh, filtered water. However, on request motors can be pre-filled with water and propylene glycol (Anti-freeze agent) for places where the temperature is below the freezing conditions. Before commissioning, ensure the pre-filled level of water inside the motor. If any loss of volume is noticed, refill with clear, cold, pure, fresh, filtered water, through water filling plugs / valves provided in the upper housing. Where the use of anti-freeze agent mixed water is not be allowed for special applications, these motors can also be filled with clear, cold, pure, fresh, filtered water and operated. Dynamically balanced rotors of these ‘W’ series motors maintain uniform clearance there by giving better efficiency and increase the life cycle of the water lubricated bush bearings. Specially designed high performance thrust bearings are used that can withstand high axial thrust loads and up thrust loads with minimum wear and tear. The unique design of thrust bearings creates a wedge of water between the shoe and the disc, and there by it gives better water lubrication and increases the life cycle of the thrust bearings. Pressure equalizing rubber diaphragm is provided to guard the pressure and volume variations of the water inside the motor. Motor sealing are made by means of ‘O’ rings, shaft seals and sand guard to avoid ingress of well water. sand and fiber particles into the motor. Care should betaken to ensure that the motor does not run when it is not submerged in the water, To prevent the motor from dry running, install water level monitor/dry run preventor. The motor needs a constant flow of water past it’s body to keep it at correct operating temperature. Ideally, the motor should be set just below the level at which water enters the bore well. When this level is not ascertained, fit a “ Flow inducer pipe” over the pumpset to ensure adequate cooling. It is mandatory to install a C.R.I. Control box for all single phase 3 wire motors. dimensions of motors are in accordance with NEMA standards.

Features l l l l l

Corrosive resistant stainless steel body. Specially designed thrust bearing to withstand high axial thrust loads. Copper rotors and low watt loss silicon steel laminations for higher starting torque. Higher power factor resulting in lesser power consumption. Larger shaft diameter for better power transmission.

Applications These prime mover submersible motors are suitable to couple with deepwell submersible pumpends used for l l l

Irrigation, Domestic water supply Fountains Industrial water supply

l l l

Pressure boosting units Ponds, Gardens Sprinkler systems and mining

Mounting


Pumping trust. Worldwide.

WATER FILLED REWINDABLE SUBMERSIBLE MOTORS

Nominal Diameter : 4"

"W" Series

Cross Sectional Drawing

Part No. 10.01 10.02 10.03 10.04 10.05 10.06 10.07 10.08 10.09 11.01

Part Name Sand Guard Shaft Seal Guard Water Filling Plug Shaft Seal Bush Upper Housing Nut Stud Cable grommet Stator

Part No. 11.02 11.03 11.04 12.01 12.02 13.01 13.02 13.03 14.01 14.02

Part Name Stator Winding Cable Earth Cable Rotor Circlip Lower Housing Counter Thrust Pad Tie-bolt Thrust Base Housing Thrust Bearing Pad

Part Name

Part No. 14.03 14.05 14.06 15.01 15.02 15.03 15.04 16.01

Thrust Bearing Base Rocker Screw Rocker Screw Nut Motor Base Diaphragm Doom Nut 'O' Ring S.S. Shell (Applicable Only For Type-A Motors)

Mounting dimensions are in accordance with the NEMA standard

In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


COMMITMENT

RELIABILITY

Pumping trust. Worldwide.

INNOVATION

WATER FILLED REWINDABLE SUBMERSIBLE MOTORS

Exploded View of 6" 'W' Series Motors 10.00 10.01 10.09

10.10 10.11 10.12 10.13 10.14 10.15

10.02 10.03 10.04 10.05 10.06 10.07 10.08 Part No.

Part Name

11.01 10.00

Cap

10.01

Rubber sand guard

10.02

Spring washer

10.03

Stud

10.04

Upper housing shell

10.05

Shaft seal / lip seal

10.06

Water filing plug

10.07

Water filing plug washer

10.08

Upper housing

10.09

Hex. Nut

10.10

Grommet screw

10.11

Cable Grommet

10.12

Grommet S.S. washer

10.13

Hex. Nut

10.14

Washer

10.15

O ring

11.01

Rubber support ring

11.02

T-Bolt

12.01

Upper housing pipe

13.01

Wounded stator

13.02

Earth screw

14.01

Rotor

14.02

Key

14.03

Circlip

15.01

Lower housing

15.02

15.02

Counter thrust pad

16.01

15.03

Bush

16.02

16.01

Thrust pad

16.02

Thrust Base

16.03

16.03

Thrust base housing

16.04 16.05 16.06

16.04

Rocker screw

16.05

Rocker Nut

16.06

Rocker nut cap

17.01

Diaphragm cup

17.02

Diaphragm

17.03

Doom nut

17.04

Diaphragm spring

17.05

'O' Ring

17.06

Motor base

11.02

12.01 13.02 13.01

14.01

14.03 11.02

11.01 15.03

14.02 15.01

17.04 17.01 17.02 17.06 17.05

10.14 17.03


Pumping trust. Worldwide.

WATER FILLED REWINDABLE SUBMERSIBLE MOTORS

Exploded View of 8" 'W' Series Motors 10.11

10.01 10.05

10.02

13.01

10.04 17.00 10.03 10.07

17.01

13.03

10.10 10.10 10.09 10.11

10.09 10.06

13.02 14.11 14.02 12.02 14.08 14.09 11.05 14.10

13.03

14.03

15.01 12.01

10.03

10.11

15.04 14.05 14.06 14.07 15.02 15.06 15.07

PART No 10.01 10.02 10.03 10.04 10.06 10.07 10.09 10.10 10.11 11.02 11.03 11.05 12.01 12.02 13.01 13.02 13.03 14.02 14.03 14.05

DESCRIPION SAND GUARD SHAFT SEAL GUARD WATER FILLING PLUG/ DRAIN PLUG SHAFT SEAL UPPER HOUSING NUT CABLE GROMMET GROMMET PLATE GASKET STATOR WINDING CABLE BODY ROTOR CIRCLIP LOWER HOUSING COUNTER THRUST PAD TIE-BOLT THRUST BEARING PAD THRUST BEARING BASE ROCKER SCREW

PART No 14.06 14.07 14.08 14.09 14.10 14.11 15.01 15.02 15.03 15.04 15.06 15.07 17.00 17.01

DESCRIPION ROCKER SCREW NUT ROCKER CAP SEGMENT SHELL THRUST SEGMENT HALF ROUND GUIDE PAD KEY MOTOR BASE DIAPHRAGM DOOMNUT 'O' RING DIAPHRAGM PLATE BOLT OIL SEAL HOUSING OIL SEAL HOUSING GASKET


COMMITMENT

RELIABILITY

Pumping trust. Worldwide.

INNOVATION

WATER FILLED REWINDABLE SUBMERSIBLE MOTORS Nominal Diameter : 4"

"W" Series

Specifications Nominal Dia Maximum Outer Diameter Power Range

Speed Versions Class of Insulation Degree of Protection Direction of Rotation Type of Duty Maximum Down Thrust Load

Minimum Temperature of Liquid Maximum Temperature of Liquid Starts per Hour Shaft Mounting Standard Method of Starting Cable Leadout

4" (100mm) 98 mm (max.) 0.37 kW to 2.2 kW - Single Phase (Incorporated with Thermal Protector) 0.37 kW to 7.5 kW - Three Phase 2900 rpm Single Phase - 230 V, 50 Hz, A.C. Supply Three Phase - 380 - 415 V, 50 Hz, A.C. Supply Y IP 58 CCW - Single Phase Electrically Reversible - Three Phase S1 (continuous) 0.37 kW to 1.1 kW - 650 lbs / 3000N 1.5 kW to 4.0 kW - 900 lbs / 4000 N 5.5 kW to 7.5 kW - 1500 lbs / 6500 N 0.15 m/sec 33OC 20 times Splined as per NEMA standard NEMA Standard Single Phase - Capacitor Start Capacitor Run (CSCR) Three Phase - Direct On Line (DOL) Permanently Connected and Sealed 3/4 core EPDM rubber Flat Cable

Material of Construction Type-A

Part Name Shaft Seal

Nitrile rubber (NBR)

Housing Sell

S.S - 304

Stator Shell

S.S - 304

Thrust Pad

Carbon Graphite

Thrust Base

S.S - 420

Diaphragm

Nitrile rubber (NBR)

Motor Base

S.S - 304

Type 'N' motors are available upto 1.1 kW

Type - A


Pumping trust. Worldwide.

WATER FILLED REWINDABLE SUBMERSIBLE MOTORS

Nominal Diameter : 4"

"W" Series

Technical Data +0.20 -0.00 Ø 76.20

4” SINGLE PHASE 230V 3 WIRE MOTORS STUD M8 x 1.25 (4 Nos)

38.05 - 38.30

25.40

Ø 37.0 15.55

12.7 min Full Spline

SPACE FOR CABLE LEAD OUTLET

H1 (Height)

98 DIA.MAX D

Eff.%

Power Factor

Max. Down Thrust Load (N)

Starting Torque (Nm)

Torque (Nm)

16

39

0.89

3000

2.0

21

52

0.9

3000

2.9

7.5

26

54

0.9

3000

1.1

10

40

57

0.95

W4A-15S

1.5

12.5

48

60

W4A-22S

2.2

16.5

66

62

Motor Power (kW)

Full Load Max.(A)

Starting Current (A)

W4A-03S

0.37

4.7

W4A-05S

0.55

6

W4A-07S

0.75

W4A-11S

All dimensions are in mm Splined shaft 14 Teeth - module 1.5875 O Pressure angle 30 A.N.S.I.B - 92 - 1 - 1970 Coupling Class 5

Full load

Cable leadouts Cable Size (Sq.mm)

Cable Length (m)

1.2

1.5

1.5

1.8

1.5

1.5

4.1

2.5

1.5

1.5

3000

6.1

3.7

2.5

1.5

0.95

4000

8.3

4.9

2.5

1.5

0.95

4000

13.3

7.4

2.5

2

4” THREE PHASE 415V D.O.L MOTORS Motor Models

Ampearage Motor Power Full Load Starting Current (kW) Max.(A)

Eff. %

Power Factor

Max. Down Thrust Load (N)

Starting Torque (Nm)

Torque (Nm)

Full load

(A)

Cable leadouts Cable Size (Sq.mm)

Cable Length (m)

W4A-03T 0.37

1.5

5

48

0.75

3000

2.2

1.2

1.5

1.5

W4A-05T 0.55

1.8

7

57

0.75

3000

3.4

1.9

1.5

1.5

W4A-07T 0.75

2.3

9

64

0.75

3000

4.5

2.5

1.5

1.5

W4A-11T

1.1

3.5

15

67

0.76

3000

6.7

3.7

1.5

1.5

W4A-15T

1.5

4.2

19

69

0.79

4000

9.0

5.0

1.5

1.5

W4A-22T

2.2

6.5

32

70

0.73

4000

14.1

7.5

1.5

1.5

W4A-30T

3

8.5

42

72

0.72

4000

19.0

10.0

1.5

2

W4A-37T

3.7

9.8

50

71

0.76

6500

22.0

12.4

2.5

2

W4A-40T

4

10.3

52

69

0.72

6500

23.0

19.0

2.5

2

W4A-55T

5.5

14.2

71

70

0.74

6500

33.7

25.0

2.5

2.5

W4A-75T

7.5

18.5

93

73

0.74

6500

45.2

31.0

2.5

2.5

DIMENSIONS AND WEIGHT Dimension (mm)

kW

HP

D

H1

Nett Weight (Kg) (approx.)

W4A-03S W4A-05S W4A-07S W4A-11S W4A-15S W4A-22S

0.37 0.55 0.75 1.1 1.5 2.2

0.5 0.75 1 1.5 2 3

S S S S S S

98 98 98 98 98 98

496 511 556 596 646 806

18.5 19.5 21 23 27 31

W4A-03T W4A-05T W4A-07T W4A-11T W4A-15T W4A-22T W4A-30T W4A-37T W4A-40T W4A-55T W4A-75T

0.37 0.55 0.75 1.1 1.5 2.2 3 3.7 4 5.5 7.5

0.5 0.75 1 1.5 2 3 4 5 5.5 7.5 10

T T T T T T T T T T T

98 98 98 98 98 98 98 98 98 98 98

496 511 576 626 666 741 806 846 846 970 1210

17.0 18.5 20 21.5 25 28.5 30.5 36 36 39.5 50.5

Motor Models

Dimensional Drawing

Ampearage

Motor Models

Motor Power

* Method of Connection

* METHOD OF CONNECTION : S - 1P / 230 V / CSCR (3 Wire)

T - 3P / D.O.L. / 415V

In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


COMMITMENT

RELIABILITY

Pumping trust. Worldwide.

INNOVATION

WATER FILLED REWINDABLE SUBMERSIBLE MOTORS Nominal Diameter : 6"

"W" Series

Specifications Nominal Dia Maximum Outer Diameter Power Range Speed Versions Class of Insulation Degree of Protection Direction of Rotation Type of Duty Maximum Down Thrust Load Minimum cooling flow along the motor Maximum Temperature of Liquid Starts per Hour Shaft Mounting Standard Method of Starting Cable Leadout

6" (150mm) 143 mm (max.) 2.2 kW to 37 kW - Three Phase 2900 rpm Three Phase - 380-415 V, 50 Hz, A.C. Supply Y IP 58 Electrical Reversible - Three Phase S1 (continuous) 2.2 kW to 22 kW - 3500 lbs / 15500 N 26 kW to 37 kW - 6000 lbs / 27500 N 0.15 m/sec 33OC 20 times Splined as per NEMA standard NEMA Standard 2.2 kW to 37 kW Direct On Line (D.O.L.) 5.5 kW to 37 kW Star Delta (S.D.) Permanently Connected and Sealed 3/4 core EPDM Rubber Flat Cable

Material of Construction Part Name

Type - A

Type - B

Shaft Seal

Nitrile Rubber (NBR)

Nitrile Rubber (NBR)

Housings Shell

S.S - 304

Cast Iron

Stator Shell

S.S - 304

S.S - 304

Thrust Pad

Carbon Graphite

Carbon Graphite

Thrust Base

S.S - 420

Cast Iron

Dhaphragm

Nitrile Rubber (NBR)

Nitrile Rubber (NBR)

Motor Base

S.S - 304

Cast Iron

In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.

Type - A


Pumping trust. Worldwide.

WATER FILLED REWINDABLE SUBMERSIBLE MOTORS

Nominal Diameter : 6"

"W" Series

Technical Data PCDØ111

45

6” THREE PHASE 415V, D.O.L. & S.D MOTORS Ampearage Full load Max. Starting Motor Down Torque Power Full Load Starting Thrust Power (kW) Max (A) Current Eff.% Factor Load (N) (Nm) (A)

S.D

D.O.L

Cable leadouts Torque Cable Size Cable (Nm) (Sq.mm) Length D.O.L

S.D

(m)

W6A-22T

-

2.2

5.3

20

72

0.76 15500

12

7.4

2.5

-

3

W6A-30T

-

3

7.0

29

74

0.77 15500

15.2

9.8

2.5

-

3

W6A-37T

-

3.7

10

35

76

0.76 15500

17.6

12.3

2.5

-

3

W6A-40T

-

4

10.8

39

78

0.76 15500

19.5

13.5

2.5

-

3

W6A-45T

-

4.5

10.5

43

78

0.77 15500

21

14.7

2.5

-

3

W6A-55T

W6A-55D

5.5

13.5

48

79.5 0.78 15500

24

18.4

4

2.5

3

W6A-75T

W6A-75D

7.5

18.5

67

15500

28

24.5

4

2.5

3

W6A-93T

W6A-93D

9.3

21

84

81.5 0.89 15500

35

30.6

6

2.5

3

W6A-110T W6A-110D

11

25

102

82

0.78 15500

43.2

36.7

6

4

3

143 DIA.MAX

W6A-130T W6A-130D

13

29.5

122

82

0.80 15500

51

43

6

4

4

D

W6A-150T W6A-150D

15

33

144

83

0.81 15500

61.8

49

6

4

4

W6A-185T W6A-185D 18.5

42.5

190

84

0.80 15500

98.1

61.3

6

4

4

W6A-220T W6A-220D

22

49.2

225

84

0.80 15500

118

73.5

6

4

4

W6A-260T W6A-260D

26

56.5

270

84.5 0.79 27500 138.3

85.8

10

6

4

W6A-300T W6A-300D

30

67.2

360

84.5 0.78 27500 196.1

98.1

10

6

4

W6A-370T W6A-370D

37

83

420

0.80 27500

122.6

16

6

4

63.5 DIA MAX 25.4 ½-2 UNF-28-(4)

76.2

H1 (Height)

6.35

73.0

MIN.22.3 FULL SPLINE

Motor Models

80

85

0.8

245

DIMENSIONS AND WEIGHT

S.D

kW

HP

D

H1

Nett Weight (Kg) (Approx.)

W6A-22T

-

2.2

3.0

T

143

634

49

W6A-30T

-

3

4.0

T

143

659

50

W6A-37T

-

3.7

5.0

T

143

686

52

W6A-40T

-

4

5.5

T

143

686

52

W6A-45T

-

4.5

6.0

T

143

686

53

W6A-55T

W6A-55D

5.5

7.5

T/D

143

706

55

W6A-75T

W6A-75D

7.5

10.0

T/D

143

736

58

W6A-93T

W6A-93D

9.3

12.5

T/D

143

771

63

W6A-110T

W6A-110D

11

15.0

T/D

143

836

67

W6A-130T

W6A-130D

13

17.5

T/D

143

876

69

W6A-150T

W6A-150D

15

20.0

T/D

143

926

71

W6A-185T

W6A-185D

18.5

25.0

T/D

143

1056

79

W6A-220T

W6A-220D

22

30.0

T/D

143

1091

83

W6A-260T

W6A-260D

26

35.0

T/D

143

1161

87

W6A-300T

W6A-300D

30

40.0

T/D

143

1221

92

W6A-370T

W6A-370D

37

50.0

T/D

143

1331

97

Motor Models

Dimensional Drawing

All dimensions are in mm Splined shaft 15 Teeth - module 1.5875 Pressure angle 30O A.N.S.I.B - 92 - 1 - 1970 Coupling Class 5

Dimension (mm)

D.O.L

Motor Power

* METHOD OF CONNECTION : T - 3P / DOL / 415V

* Method of Connection

D - 3P / SD / 415V

In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


COMMITMENT

RELIABILITY

Pumping trust. Worldwide.

INNOVATION

WATER FILLED REWINDABLE SUBMERSIBLE MOTORS Nominal Diameter : 8"

"W" Series

Specifications Nominal Dia

8" (200mm)

Maximum Outer Diameter

194 mm

Power Range

37 - 93 kW

Speed

2900 rpm

Versions

Three Phase - 380-415 V 50 Hz, A.C. Supply

Class of Insulation

F

Degree of Protection

IP 58

Direction of Rotation

Electrically Reversible - three Phase

Type of Duty

S1 (continuous)

Maximum Down Thrust Load

10000 lbs / 45500 N

Minimum cooling flow along the

0.16 m/sec

motor Maximum Temperature of Liquid

33OC

Starts per Hour

10 times

Shaft

Splined as per NEMA standard

Mounting Standard

NEMA Standard

Method of Starting

37 kW to 93 kW (D.O.L. & SD)

Cable Leadout

Permanently Connected and Sealed 3/4 core

Type - B

Rubber insulated Flat Cable

Material of Construction Part Name

Type - A

Type - B

Shaft Seal

Nitrile Rubber (NBR)

Nitrile Rubber (NBR)

Upper & Lower Housings

S.S - 304 (Casted)

Cast Iron

Stator Shell

S.S - 304

Cast Iron

Thrust Pad

Carbon Graphite

Carbon Graphite

Thrust Base

S.S - 420

S.S - 420

Diaphragm

Nitrile Rubber (NBR)

Nitrile Rubber (NBR)

Motor Base

S.S - 304 (Casted)

Cast Iron

* Shaft Seal Housing S.S Casted only applicable for type -A motors.

In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

WATER FILLED REWINDABLE SUBMERSIBLE MOTORS

Nominal Diameter : 8"

"W" Series

Technical Data A/A

8” THREE PHASE 415V, D.O.L. & S.D MOTORS A

A

Motor Power

Motor Models D.O.L

(kW)

S.D

HP

Ampearage Full Load Max (A)

Starting Current (A)

Full load Eff.%

Power Factor

Max. Starting Torque Down Torque Thrust (Nm) (Nm) Load (N)

Cable leadouts Cable Size (Sq.mm) D.O.L

S.D

Cable Length (m)

W8B-370T W8B-370D 37

50

80

280

86 0.85 45500

249

122

16

10

4

W8B-450T W8B-450D 45

60

92

315

85 0.85 45500

464

149

16

10

4

W8B-550T W8B-550D 55

75

112

410

87 0.85 45500

512

182

35

16

5

W8B-630T W8B-630D 63

85

126

510

88 0.84 45500

560

209

35

16

5

W8B-750T W8B-750D 75 100

151

592

89 0.84 45500

610

251

35

16

5

W8B-930T W8B-930D 93 125

188

636

88 0.83 45500

680

305

35

16

5

DIMENSIONS AND WEIGHT Dimension (mm) D

H1

Nett Weight (Kg) (Approx.)

T/D

194

1248

160

T/D

194

1308

167

75

T/D

194

1468

201

63

85

T/D

194

1650

232

W8B-750D

75

100

T/D

194

1770

251

W8B-930D

93

125

T/D

194

1900

278

Motor Models

Motor Power

D.O.L

S.D

kW

HP

W8B-370T

W8B-370D

37

50

W8B-450T

W8B-450D

45

60

W8B-550T

W8B-550D

55

W8B-630T

W8B-630D

W8B-750T W8B-930T

ALL DIMENSIONS ARE IN mm. SPLINED SHAFT : 23 TEETH - MODULE 1.5875, PRESSURE ANGLE 30°, A.N.S.I. B92.1 * METHOD OF CONNECTION : T - 3P / DOL / 380-415V TOLERANCE CLASS 5

* Method of Connection

D - 3P / SD /380- 415V

In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


COMMITMENT

RELIABILITY

Pumping trust. Worldwide.

INNOVATION

WATER FILLED REWINDABLE SUBMERSIBLE MOTORS Nominal Diameter : 10"

Specifications Nominal Dia

10" (250mm)

Maximum Outer Diameter

231 mm

Power Range

81 to 185 kW - Three Phase

Speed

2900 rpm

Versions

Three Phase - 380-415 V 50 Hz, A.C. Supply

Degree of Protection

IP 68

Direction of Rotation

Electrically Reversible - three Phase

Type of Duty

S1 (continuous)

Maximum Down Thrust Load

75000 N

Starts per Hour

10 Times

Shaft

Splined as per NEMA standard

Mounting Standard

NEMA Standard

Method of Starting

D.O.L. & S.D.

Type - B

Material of Construction Part Name

Type - B

Stator Shell

S.S - 304

Mechanical Seal

Ceramic Carbon

Thrust Bearing

S.S. 420

Thrust Base

Antimony Carbon

Thrust Base Housing

GG 22

Diaphragm

NBR - EPDM

Motor Base

GG 22

* Shaft Seal Housing S.S Casted only applicable for type -A motors.

In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

WATER FILLED REWINDABLE SUBMERSIBLE MOTORS

Nominal Diameter : 10"

Technical Data 10" THREE PHASE 380V - 415 V DOL & SD MOTORS Motor Power

Motor Models

Full load

Ampearage

Full Load Starting Current (A) (A)

Eff.%

Power Factor

Max. Down Thrust Load (N)

Cable leadouts Cable Size (Sq.mm)

Cable Length (m)

(kW)

HP

W10B-810D

81

110

147.2

568.9

87

0.88

75000

25

5

W10B-920D

92

125

169.1

653.7

86

0.88

75000

25

5

W10B-A10T

W10B-A10D

110

150

204.5

790.5

86

0.87

75000

25

5

W10B-A29T

W10B-A29D

129

175

231.7

895.7

88

0.88

75000

25

5

W10B-A47T

W10B-A47D

147

200

264.1

1020.7

88

0.88

75000

25

5

W10B-A66T

W10B-A66D

166

225

301.6

1165.9

87

0.88

75000

25

5

W10B-A85T

W10B-A85D

185

250

336.2

1299.3

87

0.88

75000

25

5

D.O.L

S.D

W10B-810T W10B-920T

DIMENSIONS AND WEIGHT Motor Power

Motor Models D.O.L

S.D

kW

HP

Method of Connection

Dimension (mm) D

H1

Nett Weight (Kg) (Approx.)

W10B-810T

W10B-810D

81

110

T/D

231

1370

255

W10B-920T

W10B-920D

92

125

T/D

231

1430

274

W10B-A10T W10B-A10D

110

150

T/D

231

1510

299

W10B-A29T W10B-A29D

129

175

T/D

231

1610

328

W10B-A47T W10B-A47D

147

200

T/D

231

1740

368

W10B-A66T W10B-A66D

166

225

T/D

231

1820

402

W10B-A85T W10B-A85D

185

250

T/D

231

1820

436

D.O.L / S.D.


Pumping trust. Worldwide.

FRICTION LOSS IN METERS FOR 10 METERS LONG NEW STEEL GALVANIZED PIPE (C = 140) Nominal Pipe Outer dia In mm / inches Volume rate of flow lps 0.50 1.00 1.25 1.60 2.00 2.50 3.2 4.0 5.0 8.0 10.0 12.5 16 20 25 32 40 50 60 80 100 125

25/ 1”

0.364 1. 315 1.988 3.140

32/ 1¼”

0.341 0.516 0.814 1.231 1.861 2.940

40/ 1½”

0.246 0.388 0.587 0.888 1.402 2.120 3.205

50/ 2”

0.282 0.446 0.674 1.019 2.433 3.678

65/ 2½”

0.126 0.190 0.288 0.887 1.038 1.570 2.479 3.747

80/ 3”

0.313 0.474 0.716 1.131 1.710 2.585 4.033

100/ 4”

0.131 0.198 0.312 0.472 0.713 1.127 1.704 2.576

125/ 5”

0.111 0.167 0.253 0.400 0.605 0.914 1.281 0.182 3.299

150/ 6”

0.106 0.157 0.252 0.351 0.534 0.910 1.376 0.051

FRICTION LOSS IN METERS FOR 10 METERS LONG NEW RPVC PIPE (C = 150) Nominal Pipe Outer dia In mm / inches Volume rate of flow lps 0.50 1.00 1.25 1.60 2.00 2.50 3.20 4.0 5.0 8.0 10.0 12.5 16 20 25 32 40 50 60 80 100 125

40/ 1½”

0.074 0.268 0.405 0.640 0.967 1.462 2.309 3.491

50/ 2”

0.131 0.211 0.310 0.483 0.762 1.153 1.742 4.161

63/ 2½”

0.150 0.250 0.377 0.571 1.363 2.060 3.114 4.919

75/ 3”

0.106 0.160 0.242 0.577 0.873 1.319 2.084 3.151

90/ 3½”

0.237 0.358 0.542 0.856 1.293 1.955 3.089

110/ 4¼”

0.133 0.201 0.317 0.479 0.725 1.145 1.731 2.617 3.008

125/ 5”

0.172 0.260 0.392 0.020 0.937 1.416 1.985 3.382

140/ 5½”

160/ 6¼”

0.225 0.355 0.537 0.812 1.138 1.939 2.931

0.117 0.184 0.279 0.421 0.590 1.006 1.521 2.299


Pumping trust. Worldwide.

PERMISSIBLE RANGE OF VOLUME RATES OF FLOW IN I/S THROUGH GALVANIZED STEEL PIPE TO LIMIT FRICTION LOSSES TO 10 PERCENT OF THE PIPE LENGTH

40

1.90 - 2.74

1.79 - 2.67

1.59 - 2.41

50

2.74 - 5.24

2.67 - 4.95

2.41 - 4.54

65

5.24 - 9.97

4.95 - 9.80

4.54 - 9.17

80

9.97 - 15.54

9.80 - 14.97

9.17 - 14.20

100

15.54 - 30.84

14.97 - 30.0

14.20 - 28.67

125

-

30.0 - 52.50

28.67 - 51.37

150

-

52.50 - 84.18

51.37 - 82.63

PERMISSIBLE RANGE OF VOLUME RATES OF FLOW IN I/S THROUGH RPVC PIPE TO LIMIT FRICTION LOSSES TO 10 PERCENT OF THE PIPE LENGTH

40

-

-

Up to 2.04

50

-

-

2.04 - 3.70

63

-

3.80 - 7.24

3.70 - 6.77

75

-

7.24 - 11.47

6.77 - 10.76

90

11.50 - 19.58

11.47 - 18.50

10.76 - 17.41

110

19.58 - 33.25

18.59 - 31.71

17.41 - 29.75

125

33.25 - 46.63

31.71 - 44.33

29.75 - 41.44

140

46.63 - 62.92

44.33 - 59.79

41.44 - 55.97

160

62.92 - 89.28

59.79 - 84.95

55.97 - 79.76

In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

FOR SINGLE PHASE 3 WIRE (D.O.L.) MOTORS MAXIMUM LENGTH OF COPPER CABLE Motor Rating

Cable Size Square Millimetres

kW

HP

1.5

2.5

4

6

10

16

25

35

50

70

95

0.37

0.5

120

200

320

480

810

1260

1900

2590

3580

4770

5920

230

0.55

0.75

80

130

220

320

550

850

1290

1760

2430

3230

4000

MAXIMUM

VOLT

0.75

1.0

60

100

170

250

430

670

1010

1380

1910

2550

3460

LENGTH

1.1

1.5

40

70

120

180

300

470

710

980

1360

1850

2320

1.5

2.0

30

60

90

130

230

360

550

760

1060

1440

1820

2.2

3.0

40

60

90

150

230

350

490

680

920

1160

95

120

VOLTS

50Hz

IN METRES

FOR THREE PHASE 3 WIRE (D.O.L.) MOTOR MAXIMUM LENGHT OF COPPER CABLE Motor Rating VOLTS

380-415

Cable Size Square Millimetres

kW

HP

1.5

2.5

4

6

10

16

25

35

50

70

0.37

0.50

810

1350

2160

3240

5500

8530

0.55

0.75

550

920

1480

2230

3780

5860

8890

0.75

1.0

410

680

1090

1640

2780

4330

6570

9010

1.1

1.5

300

500

810

1210

2060

3200

4850

6640

9220

1.5

2.0

220

370

590

880

1500

2340

3560

4890

6830

9230

2.2

3.0

150

250

400

600

1030

1600

2440

3350

4680

6340

7990

3

4.0

110

190

310

460

790

1230

1880

2590

3630

4930

6230

3.7

5.0

90

150

240

370

630

980

1490

2050

2870

3900

4920

4

5.5

80

140

230

340

590

920

1390

1910

2670

3600

4520

4.5

6.0

70

130

220

320

550

860

1310

1790

2510

3390

4260

5.5

7.5

60

110

170

260

440

690

1060

1450

2030

2750

3460

LENGTH

7.5

10

50

80

130

200

340

530

810

1110

1560

2120

2680

IN

9.3

12.5

60

110

160

280

440

670

920

1310

1780

2250

METRES

11

15.0

50

90

130

230

360

550

750

1060

1440

1820

13

17.5

80

110

200

310

480

650

920

1250

1580

15

20.0

70

100

170

270

410

570

800

1080

1370

18.5

25.0

80

140

210

330

450

630

860

1090

22

30.0

70

120

180

280

380

540

740

930

26

35.0

100

150

230

310

440

610

770

870

30

40.0

90

130

210

280

400

540

680

780

37

50.0

110

170

230

320

440

550

700

45

60.0

140

190

260

360

460

560

55

75.0

160

220

290

380

480

75

100

160

220

300

370

93

125

170

220

260

MAXIMUM

VOLT

50Hz

These are maximum length of cable in METRES from POWER SOURCE to MOTOR. Exceeding these length will void warranty.


Pumping trust. Worldwide.

FOR SINGLE PHASE 6 WIRE (S.D.) MOTORS MAXIMUM LENGTH OF COPPER CABLE Motor Rating Supply Volts

380-415

Cable Size Square Millimetres 16

25

35

50

70

95

kW

HP

1.5

2.5

4

6

10

120

5.5

7.5

100

165

255

390

660

1035 1590 2170 3040 4120

7.5

10

70

120

190

300

510

800 1210 1765 2340 3180

9.3

12.5

90

165

240

420

660 1000 1380 1930 2670

11

15

80

130

200

350

540

820

1130 1590 2160 2730

13

17.5

70

120

165

300

465

720

970

1380 1870 2370

15

20

60

100

150

250

400

610

855

1200 1620 2050

18.5

25

80

120

210

310

490

670

945

1290 1630 2030

22

30

70

105

180

270

420

570

810

1110 1395 1740

26

35

150

225

340

460

660

910

150

185

240

MAXIMUM LENGTH

VOLTS 1160 1310

IN

50Hz

METRES 30

40

135

190

315

420

600

810

1020 1260 1480 1760

37

50

100

160

250

345

480

660

825

1050 1200 1430

45

60

140

210

290

400

550

690

850

1000 1200 1460

56

75

110

170

240

340

460

580

720

840

1010 1230

75

100

90

130

180

260

350

440

550

650

780

950

93

125

140

190

260

330

400

470

560

680

112

150

120

160

220

280

350

400

480

580

132

175

140

190

250

300

360

430

520

150

200

130

170

220

270

320

380

460

These are maximum length of cable in METRES from POWER SOURCE to MOTOR. Exceeding these length will void warranty. In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.


Pumping trust. Worldwide.

FLOW RATE litre per second l/s

litre per minute l/min

cubic meter per hour 3 m /h

cubic foot per hour ft3/h

cubic foot per minute 3 ft /min

Imp.gallon per minute Imp.gal./min

US gallon per minute Us gal./min

Us barrel per day Is barrel/d (Petroleum)

1 0.017 0.278 0.008 0.472 0.076 0.063 0.002

60 1 16.667 0.472 28.317 4.546 3.785 0.110

3.6 0.06 1 0.0283 1.6990 0.2728 0.2271 0.0066

127.133 2.1189 35.3147 1 60 9.6326 8.0209 0.2339

2.1189 0.0353 0.5886 0.0167 1 0.1605 0.1337 0.0039

13.2 0.22 3.666 0.104 6.229 1 0.833 0.024

15.85 0.264 4.403 0.125 7.480 1.201 1 0.029

543.439 9.057 150.955 4.275 256.475 41.175 34.286 1

LIQUID Cubic meter 3 m

litre l

Millilitre ml

1 0.001 -6 1 x 10 0.00455 0.00378 0.0283

1000 1 0.001 4.546 3.785 28.317

1 x 10 1000 1 4546 3785 28317

6

Imp. gallon Imp. Gal

US gallon US gal

cubic foot ft3

220 0.22 -4 2.2 X 10 1 0.8327 6.2288

264.2 0.2642 -4 2.642 x 10 1.201 1 7.4805

35.3147 0.0353 -5 3.53 x 10 0.1605 0.1337 1

LIQUID HEAD AND PRESSURE newton per square meter N/m2 (Pa)

kilo pascal

bar

kPa

bar

1 1000

0.001 1 100 98.07 6.895 2.984 9.789 0.133 3.386

1 x 10 0.01 1 0.981 0.069 0.03 0.098 0.0013 0.0338

-5

1 x 10 98,067 6895 2984 9789 133.3 3386

kilogram force per square centimeter Kgf/cm2 -5

1.02 x 10 0.0102 1.02 1 0.0703 0.0305 0.1 0.0014 0.0345

pound force per square inch

-5

psi 1.45 x 10 0.145 14.5 14.22 1 0.433 1.42 0.019 0.491

-4

foot for water

meter of water

ft H20

m H20

3.35 x 10 0.335 33.52 32.81 2.31 1 3.28 0.045 1.133

-4

1.02 x 10 0.102 10.2 10 0.703 0.305 1 0.014 0.0345

millimeter of mercury

-4

inch of mercury

mm Hg

in Hg

0.0075 7.5 750.1 735.6 51.72 22.42 73.42 1 25.4

2.95 x 10 0.295 29.53 28.96 2.036 0.882 2.891 0.039 1

LENGTH millimeter mm

centimeter cm

meter m

inch in

foot ft

yard yd

1 10 1000 25.4 304.8 914.4

0.1 1 100 2.54 30.48 91.44

0.001 0.01 1 0.0254 0.3048 0.9144

0.0394 0.3937 39.3701 1 12 36

0.0033 0.0328 3.2808 0.0833 1 3

0.0011 0.0109 1.0936 0.0278 0.3333 1

short ton sh tn

1 Kilometer = 1000 metres = 0.62137 miles 1 mile = 1609.37 metres =- 1.60934 kilometers

MASS kilogram kg

pound lb

hundred weight (cwt)

tonne t

ton long tn

1 0.454 50.802 1000 1016 907.2

2.205 1 112 2204.6 2240 2000

0.0197 0.0089 1 19.684 20 17.857

0.001 -4 4.54 x 10 0.0508 1 1.0161 0.9072

9.84 x 10 -4 4.46 x 10 0.05 0.9842 1 0.8929

-4

0.0011 -4 5.0 x 10 0.056 1.1023 1.102 1

TEMPERATURE To Convert From

To

Use Formula

Temperature Celsius, tc Temperature Fahrenheit, tf Temperature Celsius, tc Temperature Fahrenheit, tf Temperature Kelvin, tk Temperature Kelvin, tk

Temperature Kelvin, tk Temperature Kelvin, tk Temperature Fahrenheit, tf Temperature Celsius, tc Temperature Celsius, tc Temperature Fahrenheit, tf

K = tc + 273.15 K = (tF + 459.67 / 1.8) F = 1.8 tc + 32 C = (tF - 32) / 1.8 C = tk - 273.15 F = 1.8tk - 459.67

-4


Pumping trust. Worldwide.

C.R.I. PUMPS (PVT) LIMITED

(International Division) 54-A, Avarampalayam Road, Ganapathy, Coimbatore-641 006. India. Phone : +91-422-3911606, 3911608, 2562092, 2562015 Fax : +91-422-2562065 e-mail : cri@vsnl.net website : www.cripumps.com

C.R.I. PUMPS S.A. (PTY) LIMITED

P.O. Box 6292, Halfway House, Midrand - 1685, Johannesburg, South Africa. Tel : +27-11-8058631 / 32 Fax : +27-11-8058630 e-mail : cri@cripumps.co.za website : www.cripumps.co.za

RAV POMPACILIK Tic. Ltd Sti. 10032 Sk, No : 12, AOSB, CIGLI - 35620, IZMIR, TURKIYE. Tel : +90 232 328 22 99, Fax : +90 232 328 23 33 e-mail : cripompa@cripompa.com

C.R.I. PUMPS (FZE)

P.O. Box 7988, A4-40 SAIF-Zone, Sharjah, U.A.E. Tel : +971-6-5573041 (3 Lines), Fax : +971-6-5573042 e-mail : cripumps@eim.ae

C.R.I. BOMBAS HIDRÁULICAS LTDA

Av. Rodrigo Fernando Grillo, 457, Jd. Manacas, CEP - 14.801-534, Araraquara - SP, Brasil. Fone : +55-16-3331 1099, Fax +55-16-3331 5344 e-mail : cri@cribombas.com.br website : www.cribombas.com.br

BOMBAS C.R.I. ESPAÑA S.L.

Poligono Industrial EI Bony, Calle 21, No.55, 46470 Catarroja (Valencia), Spain. Tel : +34-96 184 2974, Fax : +34-96 184 2977. e-mail : cri@bombascri.es


CRI S.S pump curves & Motors catalogue-50HZ