Issuu on Google+

PIN Photodiodes

PNZ323 (PN323) PIN Photodiode Not soldered 1.5 max.

6.0±0.2 7.5±0.2 (2) 5.5±0.2 1.0

For optical control systems

Unit : mm

4.6±0.2 2.3

Chip

Features

22.25±1.0

High sensitivity, high reliability Peak sensitivity wavelength matched with infrared light emitting diodes : λP = 900 nm (typ.)

1.32

0.5

31.25±1.0 1.5±0.2

Fast response which is well suited to high speed modulated light detection : tr, tf = 50 ns (typ.)

2- 0.6±0.1 0.5

(1.5)

Wide detection area, wide acceptance half angle : θ = 70 deg. (typ.) Adoption of visible light cutoff resin

Absolute Maximum Ratings (Ta = 25˚C) Parameter

Symbol

Ratings

0.6±0.1

3.8±0.2 (2.3)

2.54

1

2 1: Anode 2: Cathode

Unit

Reverse voltage (DC)

VR

30

V

Power dissipation

PD

100

mW

Operating ambient temperature

Topr

–30 to +85

˚C

Storage temperature

Tstg

– 40 to +100

˚C

Electro-Optical Characteristics (Ta = 25˚C) Parameter

Symbol

Conditions

min

typ

max 50

Unit

Dark current

ID

VR = 10V

5

Photo current

IL

VR = 10V, L = 1000 lx*1

55

µA

Sensitivity to infrared emitters

SIR*2

Peak sensitivity wavelength

λP *3

Response time

tr, tf

Response time

tr, tf*3

nA

6

µA

VR = 10V

900

nm

VR = 10V, RL = 1kΩ

50

ns

VR = 10V, RL = 100kΩ

5

µs

VR = 5V, H = 0.1mW/cm2

4.5

Capacitance between pins

Ct

VR = 0V, f = 1MHz

70

pF

Acceptance half angle

θ

Measured from the optical axis to the half power point

70

deg.

*1

Measurements were made using a tungsten lamp (color temperature T = 2856K) as a light source. source : λ = 940 nm *3 Switching time measurement circuit *2 Light

Sig.IN

VR = 10V (Input pulse)

λP = 900nm

Sig.OUT (Output pulse) RL

;;; ;;

50Ω

90% 10% td tr

tf

td : Delay time tr : Rise time (Time required for the collector photo current to increase from 10% to 90% of its final value) tf : Fall time (Time required for the collector photo current to decrease from 90% to 10% of its initial value)

Note) The part number in the parenthesis shows conventional part number.

1


PIN Photodiodes

PNZ323

10 3

60

40

ID (nA)

10 2

10

Dark current

IL (µA) Photo current

PD (mW)

80

10 3

VR = 10V Ta = 25˚C T = 2856K

100

Power dissipation

ID — Ta

IL — L

PD — Ta 120

1

VR = 10V

10 2

10

1

20

0 – 30

0

20

40

60

80

10 –1 10

100

10 2

IL — Ta

80 60 40

20

40

60

80

100

Directional characteristics 100

VR = 10V Ta = 25˚C

Ta = 25˚C

S (%)

80

60

Relative sensitivity

S (%)

100

Relative sensitivity

IL (%) Relative photo current

120

0

Ambient temperature Ta (˚C )

Spectral sensitivity characteristics 100

VR = 10V L = 1000 lx T = 2856K

140

10 –1 – 40 – 20

10 4

Illuminance L (lx)

Ambient temperature Ta (˚C )

160

10 3

40

80

60

40

20

20 20 0 – 40 – 20

0

20

40

60

80

0 600

100

700

Ct — VR

20

10

Reverse voltage VR (V)

10 2

10

0

40

80

ID — VR 10 2

VR = 10V Sig. OUT RL

;; 50Ω

tr

td

90% 10%

tf

1

Dark current

40

1

40

Angle θ (deg.)

ID (nA)

tr , tf (µs)

60

Rise time, Fall time

Ct (pF)

80

10 –1

80

tr , tf — RL Sig.IN

Capacitance between pins

0

1000 1100 1200

10 2

100

2

900

Wavelength λ (nm)

Ambient temperature Ta (˚C )

0 10 –2

800

10 –1

10 –2 10 –1

1

10

10 2

External load resistance RL (kΩ)

10

1

10 –1

0

8

16

24

32

40

Reverse voltage VR (V)

48


Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.

Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR


This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.


REVISTA