Page 1

Products


Contents Page

The Ventum-S modular system 5 Praktikabel structural elements 9 Praktikabel structural elements 10 Triangular structural elements  15 Trapeze-shaped structural elements  17 Bridge structural elements 19 Bridge section structural elements (version 1)  20 Bridge section structural elements (version 2) Vierendeel trusses  22 Stairways/steps/ladders 25 Stairway structural elements 26 Step structural elements 28 Ladder structural elements 31 Rigid structural elements  33 Partition walls/ceilings/concert halls 35 Modular system accessories  37 Corner sockets for bridge structural elements  43 Moving elements  44 Floor panels/construction panels  45 Intermediate frames  47 Safety rails  47 Ventum-S system ramps  49 Ramp adapters, Initial ramp sections  50 Examples of usage  51

2


Ventum-S modular system for solutions

Page

Ventum-S spectator stands  53 Stand Praktikabel structural elements 56 Safety rails in public areas  57 Modular system module integration  59 Stage trolley locking device 61 Bridge drive modules  61 Ventum-S turntables

63

Modular system turntables 63 Turntables with a rotating ring design 68 Turntables with a bridge section design 69 Turntable panels  70 Turntable drive systems External drive modules  Internal drive modules  Slip rings

74 74 74 75

Special aluminium designs 79 Plug-in feet platforms 81

3


VEntuM-s ModuLar systEM

! component compatibility plus modular system variability

4


Ventum-S modular system for solutions

The Ventum-S modular system Variability in all dimensions for your stage.

Are you looking for ONE system for: stage installations, stages, stands and technical stage sets, constructing trade fair stands, walk-in, multi-storey designs, camera and lighting towers, ramps, stairways and stairway equipment, ceilings, three-dimensional lighting elements, illuminate fabric walls ... ? The modular system components and component families can be combined with each other in a variety of ways and therefore create a variety of solutions; the basic equipment consists of many parts.

For component compatibility plus modular system variability. Each component can be used in the component family and is therefore useful when developing solutions. The component families for the Praktikabel, bridge and stairway modules all function according to this system. These component families complement each other and are completely compatible within the modular system so that you can find an effective solution.

A portfolio of possible solutions for your projects – available at any time ‌ ‌ with one system that creates results with the speed that you need, guarantees safety during construction because of the structure of the system and enables you to plan and look after your finances in the long term. You can reliably introduce your ideas with an unlimited number of options.

5


VEntuM-s ModuLar systEM

!$ component compatibility plus modular system variability

6


Ventum-s ModuLar systEM For soLutIons

7


PraktIkaBEL structuraL ELEMEnts

8


Ventum-S modular system for solutions

Praktikabel structural elements The “core” of the Ventum-S modular system.

The system:

Storage:

The Praktikabel structural elements (hinged units) are used to build any kind of structures in theatre and event technology or for sets or trade fair construction work. The elements can be assembled next to each other, on top of each other or in step formation.

The elements have patented corner hinges and can be collapsed diagonally. You only need a fraction of the original space to store them. The space-saving storage resulting from this and the low transport volumes guarantee effective use.

Dimensions: 5 Length: 0.5 m / 1.0 m / 1.5 m / 2.0 m 5 Width: 0.5 m / 1.0 m 5 Height: 0.166 m / 0.333 m / ... / 2.0 m 5 Storage area: (L + W) x 0.05 m, collapsed We also offer special individual dimensions; please get in touch with us. The Praktikabel structural elements are manufactured with a height of 166.6 mm or with 200 mm, if required. The production height of the Praktikabel structural elements is the same as the nominal height minus 25 mm. The nominal height is achieved with a floor panel or an intermediate frame (25 mm).

Key parameters to achieve effective solutions: 5 Praktikabel elements: 5 Construction volume: 5 Storage volume: 5 Constructed area: 5 Storage space:

90 Stk. 127 m3 12 m3 70 m2 6 m2

High-strength aluminium guarantees defined load ratings and is extremely light. A Praktikabel structural element only weighs 12.0 kg. The elements can be equipped with brackets and corner sockets to cope with special loads.

The Praktikabel structural elements with triangular and trapeze shapes complete the portfolio.

$ Volume when constructed and storage space for the Praktikabel structural elements

9


Praktikabel structural elements

Praktikabel structural elements Product selection

The elements can be collapsed at the corner hinges and the storage area is then (L x W) x 0.05 m. The production height of the elements is the nominal height minus 25 mm. The nominal height is the result of the units plus a 25 mm intermediate frame or a floor panel.

Praktikabel structural elements 0.5 x 0.5 x h Item Description

10

LXWXH

Material

Weight

1

Praktikabel structural element

0.5x0.5x0.166 m

AL (untreated)

4.4 kg

2

Praktikabel structural element

0.5x0.5x0.333 m

AL (untreated)

5.3 kg

3

Praktikabel structural element

0.5x0.5x0.500 m

AL (untreated)

6.2 kg

4

Praktikabel structural element

0.5x0.5x0.666 m

AL (untreated)

7.1 kg

5

Praktikabel structural element

0.5x0.5x0.833 m

AL (untreated)

7.9 kg

6

Praktikabel structural element

0.5x0.5x1.000 m

AL (untreated)

8.8 kg

7

Praktikabel structural element

0.5x0.5x1.166 m

AL (untreated)

9.7 kg

8

Praktikabel structural element

0.5x0.5x1.333 m

AL (untreated)

10.6 kg

9

Praktikabel structural element

0.5x0.5x1.500 m

AL (untreated)

11.5 kg

10

Praktikabel structural element

0.5x0.5x1.666 m

AL (untreated)

12.3 kg

11

Praktikabel structural element

0.5x0.5x1.833 m

AL (untreated)

13.2 kg

12

Praktikabel structural element

0.5x0.5x2.000 m

AL (untreated)

14.1 kg


Ventum-S modular system for solutions

Praktikabel structural elements 1.0 x 0.5 x h Item Description

LXWXH

Material

Weight

1

Praktikabel structural element

1.0x0.5x0.166 m

AL (untreated)

5.7 kg

2

Praktikabel structural element

1.0x0.5x0.333 m

AL (untreated)

6.6 kg

3

Praktikabel structural element

1.0x0.5x0.500 m

AL (untreated)

7.5 kg

4

Praktikabel structural element

1.0x0.5x0.666 m

AL (untreated)

8.4 kg

5

Praktikabel structural element

1.0x0.5x0.833 m

AL (untreated)

9.3 kg

6

Praktikabel structural element

1.0x0.5x1.000 m

AL (untreated)

10.1 kg

7

Praktikabel structural element

1.0x0.5x1.166 m

AL (untreated)

11.0 kg

8

Praktikabel structural element

1.0x0.5x1.333 m

AL (untreated)

11.9 kg

9

Praktikabel structural element

1.0x0.5x1.500 m

AL (untreated)

12.8 kg

10

Praktikabel structural element

1.0x0.5x1.666 m

AL (untreated)

13.7 kg

11

Praktikabel structural element

1.0x0.5x1.833 m

AL (untreated)

14.5 kg

12

Praktikabel structural element

1.0x0.5x2.000 m

AL (untreated)

15.4 kg

Praktikabel structural elements 1.0 x 1.0 x h Item

Description

LXWXH

Material

Weight

1

Praktikabel structural element

1.0x1.0x0.166 m

AL (untreated)

7.1 kg

2

Praktikabel structural element

1.0x1.0x0.333 m

AL (untreated)

7.9 kg

3

Praktikabel structural element

1.0x1.0x0.500 m

AL (untreated)

8.8 kg

4

Praktikabel structural element

1.0x1.0x0.666 m

AL (untreated)

9.7 kg

5

Praktikabel structural element

1.0x1.0x0.833 m

AL (untreated)

10.6 kg

6

Praktikabel structural element

1.0x1.0x1.000 m

AL (untreated)

11.5 kg

7

Praktikabel structural element

1.0x1.0x1.166 m

AL (untreated)

12.3 kg

8

Praktikabel structural element

1.0x1.0x1.333 m

AL (untreated)

13.2 kg

9

Praktikabel structural element

1.0x1.0x1.500 m

AL (untreated)

14.1 kg

10

Praktikabel structural element

1.0x1.0x1.666 m

AL (untreated)

15.0 kg

11

Praktikabel structural element

1.0x1.0x1.833 m

AL (untreated)

15.8 kg

12

Praktikabel structural element

1.0x1.0x2.000 m

AL (untreated)

16.7 kg

11


Praktikabel structural elements

Praktikabel structural elements 1.5 x 0.5 x h Item

Description

LXWXH

Material

Weight

1

Praktikabel structural element

1.5x0.5x0.166 m

AL (untreated)

7.2 kg

2

Praktikabel structural element

1.5x0.5x0.333 m

AL (untreated)

8.5 kg

3

Praktikabel structural element

1.5x0.5x0.500 m

AL (untreated)

9.9 kg

4

Praktikabel structural element

1.5x0.5x0.666 m

AL (untreated)

11.2 kg

5

Praktikabel structural element

1.5x0.5x0.833 m

AL (untreated)

12.5 kg

6

Praktikabel structural element

1.5x0.5x1.000 m

AL (untreated)

13.8 kg

7

Praktikabel structural element

1.5x0.5x1.166 m

AL (untreated)

15.1 kg

8

Praktikabel structural element

1.5x0.5x1.333 m

AL (untreated)

16.5 kg

9

Praktikabel structural element

1.5x0.5x1.500 m

AL (untreated)

17.8 kg

10

Praktikabel structural element

1.5x0.5x1.666 m

AL (untreated)

19.1 kg

11

Praktikabel structural element

1.5x0.5x1.833 m

AL (untreated)

20.4 kg

12

Praktikabel structural element

1.5x0.5x2.000 m

AL (untreated)

21.7 kg

Praktikabel structural elements 1.5 x 1.0 x h Item Description

12

LXWXH

Material

Weight

1

Praktikabel structural element

1.5x1.0x0.166 m

AL (untreated)

8.5 kg

2

Praktikabel structural element

1.5x1.0x0.333 m

AL (untreated)

9.9 kg

3

Praktikabel structural element

1.5x1.0x0.500 m

AL (untreated)

11.2 kg

4

Praktikabel structural element

1.5x1.0x0.666 m

AL (untreated)

12.5 kg

5

Praktikabel structural element

1.5x1.0x0.833 m

AL (untreated)

13.8 kg

6

Praktikabel structural element

1.5x1.0x1.000 m

AL (untreated)

15.1 kg

7

Praktikabel structural element

1.5x1.0x1.166 m

AL (untreated)

16.5 kg

8

Praktikabel structural element

1.5x1.0x1.333 m

AL (untreated)

17.8 kg

9

Praktikabel structural element

1.5x1.0x1.500 m

AL (untreated)

19.1 kg

10

Praktikabel structural element

1.5x1.0x1.666 m

AL (untreated)

20.4 kg

11

Praktikabel structural element

1.5x1.0x1.833 m

AL (untreated)

21.7 kg

12

Praktikabel structural element

1.5x1.0x2.000 m

AL (untreated)

23.0 kg


Ventum-S modular system for solutions

Praktikabel structural elements 2.0 x 0.5 x h Item Description

LXWXH

Material

Weight

1

Praktikabel structural element

2.0x0.5x0.166 m

AL (untreated)

8.5 kg

2

Praktikabel structural element

2.0x0.5x0.333 m

AL (untreated)

9.5 kg

3

Praktikabel structural element

2.0x0.5x0.500 m

AL (untreated)

11.2 kg

4

Praktikabel structural element

2.0x0.5x0.666 m

AL (untreated)

12.5 kg

5

Praktikabel structural element

2.0x0.5x0.833 m

AL (untreated)

13.8 kg

6

Praktikabel structural element

2.0x0.5x1.000 m

AL (untreated)

15.1 kg

7

Praktikabel structural element

2.0x0.5x1.166 m

AL (untreated)

16.5 kg

8

Praktikabel structural element

2.0x0.5x1.333 m

AL (untreated)

17.8 kg

9

Praktikabel structural element

2.0x0.5x1.500 m

AL (untreated)

19.1 kg

10

Praktikabel structural element

2.0x0.5x1.666 m

AL (untreated)

20.4 kg

11

Praktikabel structural element

2.0x0.5x1.833 m

AL (untreated)

21.7 kg

12

Praktikabel structural element

2.0x0.5x2.000 m

AL (untreated)

23.0 kg

Praktikabel structural elements 2.0 x 1.0 x h Item Description

LXWXH

Material

Weight

1

Praktikabel structural element

2.0x1.0x0.166 m

AL (untreated)

9.9 kg

2

Praktikabel structural element

2.0x1.0x0.333 m

AL (untreated)

11.2 kg

3

Praktikabel structural element

2.0x1.0x0.500 m

AL (untreated)

12.5 kg

4

Praktikabel structural element

2.0x1.0x0.666 m

AL (untreated)

13.8 kg

5

Praktikabel structural element

2.0x1.0x0.833 m

AL (untreated)

15.1 kg

6

Praktikabel structural element

2.0x1.0x1.000 m

AL (untreated)

16.5 kg

7

Praktikabel structural element

2.0x1.0x1.166 m

AL (untreated)

17.8 kg

8

Praktikabel structural element

2.0x1.0x1.333 m

AL (untreated)

19.1 kg

9

Praktikabel structural element

2.0x1.0x1.500 m

AL (untreated)

20.4 kg

10

Praktikabel structural element

2.0x1.0x1.666 m

AL (untreated)

21.7 kg

11

Praktikabel structural element

2.0x1.0x1.833 m

AL (untreated)

23.0 kg

12

Praktikabel structural element

2.0x1.0x2.000 m

AL (untreated)

24.4 kg

13


Praktikabel structural elements

Praktikabel structural elements with passageway Item

Description

LXWXH

Material

1

R-B-Element (DD)

1.0x1.0x2.000 m

AL (untreated)

16.7 kg

2

R-B-Element (DD)

2.0x1.0x2.000 m

AL (untreated)

24.4 kg

3

R-B-Element (DE)

1.0x1.0x2.000 m

AL (untreated)

16.7 kg

4

R-B-Element (DE)

2.0x1.0x2.000 m

AL (untreated)

24.4 kg

5

R-B-Element (DF)

1.0x0.5x2.000 m

AL (untreated)

16.0 kg

6

R-B-Element (DF)

1.0x1.0x2.000 m

AL (untreated)

16.7 kg

7

R-B-Element (DF)

1.0x1.0x2.500 m

AL (untreated)

30.0 kg

8

R-B-Element (DF)

2.0x0.5x2.000 m

AL (untreated)

23.0 kg

9

R-B-Element (DF)

2.0x1.0x2.000 m

AL (untreated)

24.4 kg

10

R-B-Element (DF)

2.0x1.0x2.500 m

AL (untreated)

48.3 kg

DF

DS

DD

Weight

DE

DF 5 Front passageway DS 5 Side passageway DD 5 Double passageway DE 5 Corner passageway Other combinations available on request!

Stabilisation elements

14

Item

Description

LXWXH

Material

Weight

1

Corner socket

For Praktikabel structural element

AL (untreated)

0.1 kg

2

Strut (brace)

Reinforced area 1.0x2.0 m

AL (untreated)

1.3 kg


Ventum-S modular system for solutions

Triangular structural elements Product selection

The production height of the elements is the nominal height minus 25 mm. The nominal height is the result of the units plus a 25 mm intermediate frame or a floor panel.

Triangular structural elements 1.0 x 1.0 x 1.41 x h Item Description

The elements can be collapsed inwards. The storage area measures 1.25 x 0.1 m.

1st - 3rd side x H

Material

Weight

1

Triangular structural element

1.0x1.0x1.41x0.166 m

AL (untreated)

6.1 kg

2

Triangular structural element

1.0x1.0x1.41x0.333 m

AL (untreated)

6.9 kg

3

Triangular structural element

1.0x1.0x1.41x0.500 m

AL (untreated)

7.7 kg

4

Triangular structural element

1.0x1.0x1.41x0.666 m

AL (untreated)

8.4 kg

5

Triangular structural element

1.0x1.0x1.41x0.833 m

AL (untreated)

9.2 kg

6

Triangular structural element

1.0x1.0x1.41x1.000 m

AL (untreated)

10.0 kg

7

Triangular structural element

1.0x1.0x1.41x1.166 m

AL (untreated)

10.7 kg

8

Triangular structural element

1.0x1.0x1.41x1.333 m

AL (untreated)

11.5 kg

9

Triangular structural element

1.0x1.0x1.41x1.500 m

AL (untreated)

12.3 kg

10

Triangular structural element

1.0x1.0x1.41x1.666 m

AL (untreated)

13.0 kg

11

Triangular structural element

1.0x1.0x1.41x1.833 m

AL (untreated)

13.8 kg

12

Triangular structural element

1.0x1.0x1.41x2.000 m

AL (untreated)

14.6 kg

15


Praktikabel structural elements

Triangular structural elements 1.5 x 1.5 x 2.12 x h Item Description

The elements can be collapsed inwards. The storage area measures 1.96 x 0.1 m.

1st - 3rd side x H

Material

Weight

1

Triangular structural element

1.5x1.5x2.12x0.166 m

AL (untreated)

8.4 kg

2

Triangular structural element

1.5x1.5x2.12x0.333 m

AL (untreated)

9.1 kg

3

Triangular structural element

1.5x1.5x2.12x0.500 m

AL (untreated)

9.9 kg

4

Triangular structural element

1.5x1.5x2.12x0.666 m

AL (untreated)

10.7 kg

5

Triangular structural element

1.5x1.5x2.12x0.833 m

AL (untreated)

11.4 kg

6

Triangular structural element

1.5x1.5x2.12x1.000 m

AL (untreated)

12.2 kg

7

Triangular structural element

1.5x1.5x2.12x1.166 m

AL (untreated)

13.0 kg

8

Triangular structural element

1.5x1.5x2.12x1.333 m

AL (untreated)

13.7 kg

9

Triangular structural element

1.5x1.5x2.12x1.500 m

AL (untreated)

14.5 kg

10

Triangular structural element

1.5x1.5x2.12x1.666 m

AL (untreated)

15.3 kg

11

Triangular structural element

1.5x1.5x2.12x1.833 m

AL (untreated)

16.1 kg

12

Triangular structural element

1.5x1.5x2.12x2.000 m

AL (untreated)

16.8 kg

Triangular structural elements 2.0 x 1.0 x 2.24 x h Item Description

The elements can be collapsed inwards. The storage area measures 2.0 x 0.1 m.

16

1st - 3rd side x H

Material

Weight

1

Triangular structural element

2.0x1.0x2.24x0.166 m

AL (untreated)

8.3 kg

2

Triangular structural element

2.0x1.0x2.24x0.333 m

AL (untreated)

9.1 kg

3

Triangular structural element

2.0x1.0x2.24x0.500 m

AL (untreated)

9.9 kg

4

Triangular structural element

2.0x1.0x2.24x0.666 m

AL (untreated)

10.6 kg

5

Triangular structural element

2.0x1.0x2.24x0.833 m

AL (untreated)

11.4 kg

6

Triangular structural element

2.0x1.0x2.24x1.000 m

AL (untreated)

12.2 kg

7

Triangular structural element

2.0x1.0x2.24x1.166 m

AL (untreated)

12.9 kg

8

Triangular structural element

2.0x1.0x2.24x1.333 m

AL (untreated)

13.7 kg

9

Triangular structural element

2.0x1.0x2.24x1.500 m

AL (untreated)

14.5 kg

10

Triangular structural element

2.0x1.0x2.24x1.666 m

AL (untreated)

15.2 kg

11

Triangular structural element

2.0x1.0x2.24x1.833 m

AL (untreated)

16.0 kg

12

Triangular structural element

2.0x1.0x2.24x2.000 m

AL (untreated)

16.8 kg


Ventum-S modular system for solutions

Trapeze-shaped structural elements Product selection

Trapeze-shaped structural elements Dimensions in line with specifications Item Description 1

Price available on request

Production dimensions required: 5 Lenght l 5 Width b1 und b2 5 Height h (166 mm system height)

17


BrIdgE sEctIon structuraL ELEMEnts

18


Ventum-S modular system for solutions

Bridge section structural elements Effectiveness on a horizontal level. Flexibility and safety for building work with aluminium superstructures

The system:

System integration:

The bridge structural elements are suitable for providing level spaces with any kind of incline and for aluminium superstructure work in conjunction with Praktikabel structural elements. Traversing structures are defined statically and can be safely used to meet your planning objectives.

5 Corner sockets 5 Moving elements 5 Stage carriage locking devices 5 Bridge section drive modules

The bridge sections are designed as an extruded profile (version 1) or as a Vierendeel truss (version 2). The accessories enhance the options for using the system with plug-in feet receptacles, moving trolleys and systematically integrating locking devices and motorised drive systems.

Dimensions: 5 Length: 5 Width: 5 Version 1: 5 Height Version 1: 5 Version 2: 5 Height Version 2:

1.0 m / 2.0 m / 3.0 m / 4.0 m / 5.0 m / 6.0 m 0.5 m / 1.0 m Extruded profile 141.6 mm Vierendeel truss 116.6 / 141.6 / 308.3 mm

! Insert carriage

5 We can manufacture special dimensions in line with your requirements, if required. The production height of the bridge structural elements is the nominal height. The 166 mm system height is created using a floor panel or intermediate frame.

19


Bridge section structural elements

Bridge section structural elements (Version 1) Product selection The bridge structural elements are made of a special profile. The gaps in the bridges guarantee compatibility with the modular system; the elements are suitable for static su-perstructure work. The profile height is the same as the nominal height; the system height is created using a 25 mm intermediate frame or a floor panel.

20


Ventum-S modular system for solutions

Bridge structural elements (1) l x 0.5 x 0.141 m Item Description

LXWXH

Material

Weight

1

Bridge structural elements (1)

1.0x0.5x0.141 m

AL (untreated)

7.6 kg

2

Bridge structural elements (1)

2.0x0.5x0.141 m

AL (untreated)

13.3 kg

3

Bridge structural elements (1)

3.0x0.5x0.141 m

AL (untreated)

19.9 kg

4

Bridge structural elements (1)

4.0x0.5x0.141 m

AL (untreated)

25.6 kg

5

Bridge structural elements (1)

5.0x0.5x0.141 m

AL (untreated)

32.1 kg

6

Bridge structural elements (1)

6.0x0.5x0.141 m

AL (untreated)

37.9 kg

Bridge structural elements (1) l x 1.0 x 0.141 m Item Description

LXWXH

Material

Weight

1

Bridge structural elements (1)

1.0x1.0x0.141 m

AL (untreated)

10.3 kg

2

Bridge structural elements (1)

2.0x1.0x0.141 m

AL (untreated)

16.3 kg

3

Bridge structural elements (1)

3.0x1.0x0.141 m

AL (untreated)

24.3 kg

4

Bridge structural elements (1)

4.0x1.0x0.141 m

AL (untreated)

30.4 kg

5

Bridge structural elements (1)

5.0x1.0x0.141 m

AL (untreated)

38.3 kg

6

Bridge structural elements (1)

6.0x1.0x0.141 m

AL (untreated)

44.4 kg

Bridge section (1) Item Description

Separate bridge structural element section: drilled

LXWXH

Material

Weight

1

Bridge section (1)

h=141.6 mm/l=1000 mm

AL (untreated)

2.6 kg

2

Bridge section (1)

h=141.6 mm/l=2000 mm

AL (untreated)

5.3 kg

3

Bridge section (1)

h=141.6 mm/l=3000 mm

AL (untreated)

8.0 kg

4

Bridge section (1)

h=141.6 mm/l=4000 mm

AL (untreated)

10.7 kg

5

Bridge section (1)

h=141.6 mm/l=5000 mm

AL (untreated)

13.5 kg

6

Bridge section (1)

h=141.6 mm/l=6000 mm

AL (untreated)

16.9 kg

vertically and horizontally in the system dimensions; can be used with gaps for vertical assembly work; cut on both sides with a 45째 join. Material: EN AW-6060 T66

21


Bridge section structural elements

Zargen / Bridge structural elements (Version 2) Vierendeel trusses Product selection The bridge section structural elements are manufactured as Vierendeel trusses; the ratio between their load rating and their own weight is absolutely ideal. The production height is the nominal height; the system height is created using a 25 mm thick intermediate frame or a floor panel.

Bridge structural elements (2) l x 0.5 x 0.141 m Item Description

LXWXH

Material

Weight

1

Bridge structural elements (2)

1.0x0.5x0.141 m

AL (untreated)

6.7 kg

2

Bridge structural elements (2)

2.0x0.5x0.141 m

AL (untreated)

11.7 kg

3

Bridge structural elements (2)

3.0x0.5x0.141 m

AL (untreated)

16.9 kg

4

Bridge structural elements (2)

4.0x0.5x0.141 m

AL (untreated)

21.9 kg

5

Bridge structural elements (2)

5.0x0.5x0.141 m

AL (untreated)

27.1 kg

6

Bridge structural elements (2)

6.0x0.5x0.141 m

AL (untreated)

32.1 kg

Bridge structural elements (2) l x 1.0 x 0.141 m Item

22

Description

LXWXH

Material

Weight

1

Bridge structural elements (2)

1.0x1.0x0.141 m

AL (untreated)

8.8 kg

2

Bridge structural elements (2)

2.0x1.0x0.141 m

AL (untreated)

14.1 kg

3

Bridge structural elements (2)

3.0x1.0x0.141 m

AL (untreated)

20.0 kg

4

Bridge structural elements (2)

4.0x1.0x0.141 m

AL (untreated)

25.3 kg

5

Bridge structural elements (2)

5.0x1.0x0.141 m

AL (untreated)

31.2 kg

6

Bridge structural elements (2)

6.0x1.0x0.141 m

AL (untreated)

36.5 kg


Ventum-S modular system for solutions

Bridge structural elements (2) l x b x 0.308 m Item

Description

LXWXH

Material

Weight

1

Bridge structural elements (2)

1.0x0.5x0.308 m

AL (untreated)

8.8 kg

2

Bridge structural elements (2)

2.0x0.5x0.308 m

AL (untreated)

15.2 kg

3

Bridge structural elements (2)

3.0x0.5x0.308 m

AL (untreated)

21.8 kg

4

Bridge structural elements (2)

4.0x0.5x0.308 m

AL (untreated)

28.1 kg

5

Bridge structural elements (2)

5.0x0.5x0.308 m

AL (untreated)

34.7 kg

6

Bridge structural elements (2)

6.0x0.5x0.308 m

AL (untreated)

41.1 kg

7

Bridge structural elements (2)

1.0x1.0x0.308 m

AL (untreated)

10.9 kg

8

Bridge structural elements (2)

2.0x1.0x0.308 m

AL (untreated)

17.6 kg

9

Bridge structural elements (2)

3.0x1.0x0.308 m

AL (untreated)

24.8 kg

10

Bridge structural elements (2)

4.0x1.0x0.308 m

AL (untreated)

31.5 kg

11

Bridge structural elements (2)

5.0x1.0x0.308 m

AL (untreated)

38.8 kg

12

Bridge structural elements (2)

6.0x1.0x0.308 m

AL (untreated)

45.4 kg

Description

LXWXH

Material

1

Bridge structural elements (2W)

1.0x1.0x0.116 m

AL (untreated)

8.5 kg

2

Bridge structural elements (2W)

2.0x1.0x0.116 m

AL (untreated)

13.6 kg

3

Bridge structural elements (2W)

3.0x1.0x0.116 m

AL (untreated)

19.3 kg

4

Bridge structural elements (2W)

4.0x1.0x0.116 m

AL (untreated)

24.3 kg

5

Bridge structural elements (2W)

5.0x1.0x0.116 m

AL (untreated)

30.0 kg

6

Bridge structural elements (2W)

6.0x1.0x0.116 m

AL (untreated)

35.1 kg

Flat carriage parts l x b x 0.116 m Item

The flat carriage parts are used where a final carri-

Weight

age height of 166.6 mm has to be achieved.

23


STairWaYS / STEpS / LaDDErS

24


Ventum-S modular system for solutions

Stairways / Steps / Ladders Steps to provide safety.

The system:

Ventum-S ladder structural elements:

The stairways, steps and ladders provide complete variability on several levels. They can be used as a component family and in the modular system in terms of their width and height. You will find the suitable solution for all levels in a wide variety of specific applications.

5 Step height: 0.333 m 5 Width: 0.4 m 5 Overall height: 1.0 m ... 2.0 m

Dimensions and designs: Ventum-S stairway structural elements: 5 Step height: 0.166 m / 0.2 m 5 Depth: 0.2 / 0.25 / 0.3 m 5 Width: 0.5 / 1.0 m 5 Overall height: 2.0 m Frame stairway: Frame stairways can be assembled as complete stage stairways with variable widths without any intermediate space. Stringboard stairway: A stringboard stairway is used as an invisible stairway or a folding stairway. Ventum-S step structural elements: 5 Step height: 0.166 m / 0.2 m 5 Depth: 0.2 / 0.25 / 0.3 m 5 Width: 0.5 / 1.0 m 5 Overall height: 0.166 m / 0.2 m bis 1.0 m

The ladder structural elements complete the portfolio for multi-floor structures as a space-saving option; full modular system compatibility is guaranteed here too.

Safety rails and floor coatings: 5 Safety rails Stairways and steps with more than five steps must have safety rails. We provide safety rails that are compatible with the modular system. The assembly work takes place using drilled holes in the system at the side; the safety rails are col lapsed for storage and transport and therefore save space. 5 Finish for stairways and steps The Ventum-S steps are covered with plywood boards as their standard feature. The riser and sides are not faced. We can offer surface finishes (e.g. acrylic glass) and facing for the risers and sides as an individual option, if required.

The steps are used as variable lean-to elements, which create suitable access to platforms and structures with several levels with between one and six steps.

25


Stairways / Steps / Ladders

Stairway structural elements Product selection The basic structure is solidly welded; the step surface is coated with phenol resin as the standard feature. Other surface finishes are available on request. We can manufacture special dimensions and special designs for stairways/steps with a wide variety of options, e.g. as a conical stairway, a pyramid-shaped, a parabola-shaped or a spiral stairway. We can make individual step height and depth dimensions in line with your wishes.

Stairway structural elements frame stairway Item Description

Frame stairways are suitable for construction next to each other without any crossover (e.g. complete stage stairways).

(H/D/W) = step height/depth/width

26

H/D/W

Material

Weight

1

Stairway structural element T1/10

0.200/0.200/1.0 m

Al/plywood

48.5 kg

2

Stairway structural element T1.1/10

0.200/0.200/0.5 m

Al/plywood

32.0 kg

3

Stairway structural element T2/10

0.200/0.250/1.0 m

Al/plywood

65.5 kg

4

Stairway structural element T2.1/10

0.200/0.250/0.5 m

Al/plywood

41.7 kg

5

Stairway structural element T3/10

0.200/0.300/1.0 m

Al/plywood

65.5 kg

6

Stairway structural element T3.1/10

0.200/0.300/0.5 m

Al/plywood

45.1 kg

7

Stairway structural element T4/10

0.200/0.100/1.0 m

Al/plywood

31.5 kg

8

Stairway structural element T4.1/10

0.200/0.100/0.5 m

Al/plywood

19.1 kg

9

Stairway structural element T5/12

0.166/0.200/1.0 m

Al/plywood

61.9 kg

10

Stairway structural element T5.1/12

0.166/0.200/0.5 m

Al/plywood

52.0 kg

11

Stairway structural element T6/12

0.166/0.250/1.0 m

Al/plywood

66.5 kg

12

Stairway structural element T6.1/12

0.166/0.250/0.5 m

Al/plywood

58.4 kg

13

Stairway structural element T7/12

0.166/0.300/1.0 m

Al/plywood

74.8 kg

14

Stairway structural element T7.1/12

0.166/0.300/0.5 m

Al/plywood

64.9 kg


Ventum-S modular system for solutions

Stairway structural elements stringboard stairway Item Description

H/D/W

Material

Weight

1

Stairway structural element W1/10

0.200/0.200/1.0 m

Al/plywood

42.1 kg

2

Stairway structural element W1.1/10 0.200/0.200/0.5 m

Al/plywood

26.9 kg

Stairway safety rails for frame stairways/ stringboard stairways Item Description

Steps / sTEP HEIGHT / dEPTH

Material

Weight

1

Stairway safety rail

10 Steps/s=200/D=200 mm

AL (untreated)

7.0 kg

2

Stairway safety rail

10 Steps/s=200/D=250 mm

AL (untreated)

7.9 kg

3

Stairway safety rail

10 Steps/s=200/D=300 mm

AL (untreated)

8.9 kg

4

Stairway safety rail

12 Steps/s=166/D=200 mm

AL (untreated)

7.7 kg

5

Stairway safety rail

12 Steps/s=166/D=250 mm

AL (untreated)

8.9 kg

6

Stairway safety rail

12 Steps/s=166/D=300 mm

AL (untreated)

10.0 kg

Stage safety rails for stairway structural elements (no safety rails for the public area), attached with screws

27


Stairways / Steps / Ladders

Step structural elements Product selection

The basic structure is solidly welded; the step surface is coated with phenol resin as the standard feature. Other surface finishes are available on request.

Step structural elements Step height 166 mm / depth 200 mm Item Description

(H/D/W) = step height/depth/width

28

H/D/W

Material

Weight

1

1 step (h=0.166 m)

0.166/0.200/1.0 m

Al/plywood

4.8 kg

2

2 steps (h=0.333 m)

0.166/0.200/1.0 m

Al/plywood

8.6 kg

3

3 steps (h=0.500 m)

0.166/0.200/1.0 m

Al/plywood

12.5 kg

4

4 steps (h=0.666 m)

0.166/0.200/1.0 m

Al/plywood

16.7 kg

5

5 steps (h=0.833 m)

0.166/0.200/1.0 m

Al/plywood

20.9 kg

6

6 steps (h=1.000 m)

0.166/0.200/1.0 m

Al/plywood

25.4 kg

7

1 steps (h=0.166 m)

0.166/0.200/0.5 m

Al/plywood

2.7 kg

8

2 steps (h=0.333 m)

0.166/0.200/0.5 m

Al/plywood

5.0 kg

9

3 steps (h=0.500 m)

0.166/0.200/0.5 m

Al/plywood

7.5 kg

10

4 steps (h=0.666 m)

0.166/0.200/0.5 m

Al/plywood

10.1 kg

11

5 steps (h=0.833 m)

0.166/0.200/0.5 m

Al/plywood

12.9 kg

12

6 steps (h=1.000 m)

0.166/0.200/0.5 m

Al/plywood

15.9 kg


Ventum-S modular system for solutions

Step structural elements Height 166 mm / depth 250 mm Item Description

H/D/W

Material

Weight

1

1 step (h=0.166 m)

0.166/0.250/1.0 m

Al/plywood

5.3 kg

2

2 steps (h=0.333 m)

0.166/0.250/1.0 m

Al/plywood

9.6 kg

3

3 steps (h=0.500 m)

0.166/0.250/1.0 m

Al/plywood

14.1 kg

4

4 steps (h=0.666 m)

0.166/0.250/1.0 m

Al/plywood

18.7 kg

5

5 steps (h=0.833 m)

0.166/0.250/1.0 m

Al/plywood

23.5 kg

6

6 steps (h=1.000 m)

0.166/0.250/1.0 m

Al/plywood

28.5 kg

7

1 steps (h=0.166 m)

0.166/0.250/0.5 m

Al/plywood

2.9 kg

8

2 steps (h=0.333 m)

0.166/0.250/0.5 m

Al/plywood

5.6 kg

9

3 steps (h=0.500 m)

0.166/0.250/0.5 m

Al/plywood

8.4 kg

10

4 steps (h=0.666 m)

0.166/0.250/0.5 m

Al/plywood

11.4 kg

11

5 steps (h=0.833 m)

0.166/0.250/0.5 m

Al/plywood

14.5 kg

12

6 steps (h=1.000 m)

0.166/0.250/0.5 m

Al/plywood

17.8 kg

H/D/W

Material

Weight

Step structural elements Height 166 mm / depth 300 mm Item Description 1

1 step (h=0.166 m)

0.166/0.300/1.0 m

Al/plywood

5.9 kg

2

2 steps (h=0.333 m)

0.166/0.300/1.0 m

Al/plywood

10.7 kg

3

3 steps (h=0.500 m)

0.166/0.300/1.0 m

Al/plywood

15.7 kg

4

4 steps (h=0.666 m)

0.166/0.300/1.0 m

Al/plywood

20.9 kg

5

5 steps (h=0.833 m)

0.166/0.300/1.0 m

Al/plywood

26.2 kg

6

6 steps (h=1.000 m)

0.166/0.300/1.0 m

Al/plywood

31.7 kg

7

1 steps (h=0.166 m)

0.166/0.300/0.5 m

Al/plywood

3.3 kg

8

2 steps (h=0.333 m)

0.166/0.300/0.5 m

Al/plywood

6.3 kg

9

3 steps (h=0.500 m)

0.166/0.300/0.5 m

Al/plywood

9.4 kg

10

4 steps (h=0.666 m)

0.166/0.300/0.5 m

Al/plywood

12.7 kg

11

5 steps (h=0.833 m)

0.166/0.300/0.5 m

Al/plywood

16.2 kg

12

6 steps (h=1.000 m)

0.166/0.300/0.5 m

Al/plywood

19.8 kg

29


Stairways / Steps / Ladders

Step safety rails – attached with screws Item Description

Stage safety rails for step structural elements, no safety rails for the public area, attached with screws

30

Steps / sTEP HEIGHT / dEPTH

Material

7

Step safety rail

3 Steps/s=166/a=200 mm

AL (untreated)

8

Step safety rail

3 Steps/s=166/a=250 mm

AL (untreated)

9

Step safety rail

3 Steps/s=166/a=300 mm

AL (untreated)

10

Step safety rail

3 Steps/s=200/a=200 mm

AL (untreated)

11

Step safety rail

3 Steps/s=200/a=250 mm

AL (untreated)

12

Step safety rail

3 Steps/s=200/a=300 mm

AL (untreated)

13

Step safety rail

4 Steps/s=166/a=200 mm

AL (untreated)

14

Step safety rail

4 Steps/s=166/a=250 mm

AL (untreated)

15

Step safety rail

4 Steps/s=166/a=300 mm

AL (untreated)

16

Step safety rail

4 Steps/s=200/a=200 mm

AL (untreated)

17

Step safety rail

4 Steps/s=200/a=250 mm

AL (untreated)

18

Step safety rail

4 Steps/s=200/a=300 mm

AL (untreated)

19

Step safety rail

5 Steps/s=166/a=200 mm

AL (untreated)

20

Step safety rail

5 Steps/s=166/a=250 mm

AL (untreated)

21

Step safety rail

5 Steps/s=166/a=300 mm

AL (untreated)

22

Step safety rail

5 Steps/s=200/a=200 mm

AL (untreated)

23

Step safety rail

5 Steps/s=200/a=250 mm

AL (untreated)

24

Step safety rail

5 Steps/s=200/a=300 mm

AL (untreated)

25

Step safety rail

6 Steps/s=166/a=200 mm

AL (untreated)

26

Step safety rail

6 Steps/s=166/a=250 mm

AL (untreated)

27

Step safety rail

6 Steps/s=166/a=300 mm

AL (untreated)

28

Step safety rail

6 Steps/s=200/a=200 mm

AL (untreated)

29

Step safety rail

6 Steps/s=200/a=250 mm

AL (untreated)

30

Step safety rail

6 Steps/s=200/a=300 mm

AL (untreated)


Ventum-S modular system for solutions

Ladder elements Product selection

Distance between rungs 0.333 m OA5 Without handle AL 5 With handle on the left AR 5 With handle on the right 2A 5 Double handle (left + right) Other heights are available on request.

Ladder elements – for assembly in system structural elements Item Description

W / H

Material

Weight

1

Ladder 2-OA

w=0.4/h=2.0 m

AL (untreated)

4.4 kg

2

Ladder 2-AL

w=0.4/h=2.0 m

AL (untreated)

6.3 kg

3

Ladder 2-AR

w=0.4/h=2.0 m

AL (untreated)

6.3 kg

4

Ladder 2-2A

w=0.4/h=2.0 m

AL (untreated)

8.2 kg

31


rIgId structuraL ELEMEnts

32


Ventum-S modular system for solutions

Rigid structural elements Variability for partitions, ramps and ceilings.

The system: The rigid structural elements are used for variable even structures. With a wide variety of geometrical shapes and low load ratings, the rigid structural elements can be ideally adapted to the application at hand. The basic structural shapes can be combined with the modular system elements and are available in the dimensions listed. We develop and manufacture special shapes in line with your requirements.

The variable concert room illustrates how the rigid structural elements can be used. Rectangular and trapeze-shaped elements with various heights are used for the side walls and are set up at different angles and connected with spacers. Ceilings hung at an angle form the top finish. It is quick and easy to adapt the concert room size to meet your requirements by changing the number of elements.

Dimensions:

Accessories:

5 Length: 1.0 m / 2.0 m / 3.0 m / 4.0 m / 5.0 m / 6.0 m 5 Width: 0.5 m / 1.0 m 5 Height: 0.06 m

5 Support angles 5 Spacers 5 Adjustable feet 5 Connectors

We can manufacture triangles, trapezes, polygons or curved elements in special shapes. The Ventum-S floor panels can be used for areas where people have to walk.

Areas of use:

Surfaces: 5 Wood 5 Acrylic glass 5 Other materials on request

5 Partitions 5 Ramps 5 Ceilings 5 Concert rooms

$ Rigid structural elements in the variable concert room

33


rIgId structuraL ELEMEnts

34


Ventum-S modular system for solutions

Rigid structural elements Product selection

Rigid structural elements Item Description

W / H (m)

Material

Weight

1

Rigid structural element

w=0.5/h=0.06 m (per m)

AL (untreated)

3.5 kg

2

Rigid structural element

w=0.75/h=0.06 m (per m)

AL (untreated)

3.8 kg

3

Rigid structural element

w=1.0/h=0.06 m (per m)

AL (untreated)

4.0 kg

35


ModuLar systEM accEssorIEs

36


Ventum-S modular system for solutions

Modular system accessories Introducing project requirements in great detail.

The system: The accessories supplement the modular system standard elements and offer a broad range of uses. The accessories become the key to maximum variability and safety both in the component families and modular system usage. A summary of accessories: 5 Corner sockets and plug-in feet for bridge structural elements 5 Moving elements 5 Floor panels / construction panels 5 Intermediate frames 5 Safety rails

! Height-adjustable peg ends for plug-in feet

Extending the portfolio of solutions: The accessories guarantee that the modular system works well for a wide variety of stage projects. Our ongoing de-velopment of accessory components enables you to meet individual project requirements.

! Lifting roller

37


ModuLar systEM accEssorIEs

Ventum-s corner sockets for plug-in feet

Ventum-s moving elements moving element: insert carriage

Bridge structural elements in version 1 can be combined with corner sockets and plug-in feet to form plug-in feet platforms and platform areas. these areas can be set up both on a level and with steps.

Bridge structural elements become mobile quickly and easily with the insert carriage. the insert carriages are equipped with direction locks or castors and have a functional design and a low weight of 5.2 kg. moving element: lock plus wheel By using locks plus wheels with bridge structural elements, it is easy to position elements on the outsides of the bridge units. the rollers on the locks plus wheels are available as castors, direction locks or total locks.

! corner socket " Insert carriage

38


Ventum-s ModuLar systEM For soLutIons

! stage trolley with locks plus wheels

! Lock plus wheel

moving elements: lifting roller this makes Praktikabel structural elements mobile, either individually or as stage structures. 5 rapid assembly 5 sturdy design 5 Floor clearance: 25 mm

! Praktikabel with lifting rollers

# Lifting roller

39


Modular system accessories

Floor panels Floor panels with a 24 mm plywood design with an end-to-end surface for covering platforms, stages and stands. The positioning angles inserted in the floor panels allow them to be screwed to substructures so that they meet requirements for public areas too. 5 Standard panel locking devices: Screw joint on the positioning angle with the modular system design. 5 Optional panel locking device with direct screw joint or lock.

! Construction panel

40

Construction panels Construction panels as 24 mm plywood panels with positioning angles and vertical modular system drill holes. They enable you to screw through the connecting element and therefore create the necessary static vertical superstructure layers in the modular system elements for intermediate levels where people need to walk.


Ventum-S modular system for solutions

41


Modular system accessories

Ventum-S intermediate frames The key component for structures with the system dimensions. The step height is achieved by using a panel or an intermediate frame (D=25 mm). One of the two components must be used to provide the standard system height when constructing items on top of each other. The production height of the modular system elements comes from the system dimension minus 25 mm. The use of the intermediate frames creates considerable weight reductions in comparison with construction panels. Structures can be pre-assembled and taken on to the stage with ideal weights if the installations have to be completed with a tight time schedule.

! Intermediate frame

Ventum-S safety rails Safety rails are designed for use in the non-public area. They are used to protect edges of stages, stage sets and multi-layer structures consisting of basic modular system materials.

! Safety rail

42


Ventum-s ModuLar systEM For soLutIons

modular system aCCessories corner SocKetS / pLuG-in Feet For bridge struCtural elements Product selection

corner socket – for bridge structural elements (Version 1) ItEM dEscrIPtIon 1

MatErIaL

corner socket for bridge structural elements (1)

cast aluminium

WEIgHt 0.7 kg

corner socket for assembly in bridge structural elements (version 1). suitable plug-in feet 60x60

Plug-in feet - for bridge structural elements (Version 1) ItEM dEscrIPtIon 1 2 3 4 5 Fits into corner socket for bridge structural

dIMEnsIons

Plug-in feet for bridge

For structural height of

structural element

0.333 m

Plug-in feet for bridge

For structural height of

structural element

0.500 m

Plug-in feet for bridge

For structural height of

structural element

0.666 m

Plug-in feet for bridge

For structural height of

structural element

0.833 m

Plug-in feet for bridge

For structural height of

structural element

1.000 m

MatErIaL

WEIgHt

aL (untreated)

0.3 kg

aL (untreated)

0.4 kg

aL (untreated)

0.5 kg

aL (untreated)

0.6 kg

aL (untreated)

0.8 kg

elements (version 1)

43


Modular system accessories

Corner sockets/plug-in feet for bridge structural elements Product selection

Telescopic plug-in feet for bridge structural elements Item Description 1

44

Price and design available on request


Ventum-S modular system for solutions

Moving elements Product selection

Moving elements – insert carriage Item

Description

Specification

Material

Weight

1

Insert carriage W0 (1.0 m)

Without wheels

AL (untreated)

3.6 kg

2

Insert carriage W1 (1.0 m)

2 fixed wheels

Al/steel

7.4 kg

3

Insert carriage W2 (1.0 m)

2 casters

Al/steel

7.4 kg

4

Insert carriage W3 (1.0 m)

2 wheels with direction locks

Al/steel

7.5 kg

Solidly welded, for screw assembly in bridge structural elements, both versions 1 and 2 (floor clearance 25 mm)

Moving elements – lock plus wheel Item

Description

Specification

Material

Weight

1

Lock plus wheel K1

Without brakes

Al/steel

3.2 kg

2

Lock plus wheel K2

With brake roller

Al/steel

3.2 kg

For external assembly with bridge structural elements. K1/2 can be combined with an insert carriage. K2 provides a braking function.

Moving elements – lifting rollers Item

Description

Load rating

1

Lifting roller (bridge structural element)

Load rating 160 kg

2

Lifting roller (Praktikabel structural element)

Load rating 160 kg

To move bridge structural elements or Praktikabel structural elements (corner assembly – 0.333 mm clearance required)

45


Modular system accessories

Floor panels / construction panels Product selection

Floor panels for modular system usage Item Description

Coated with phenol resin on both sides (dark brown, rough surface on one side); edges varnished; with positioning angles (drilled for screwing to system elements)

LxWxD

Material

Weight

1

Floor panel (PH)

0.5x0.5x0.024 m

Plywood

4.0 kg

2

Floor panel (PH)

1.0x0.5x0.024 m

Plywood

8.1 kg

3

Floor panel (PH)

1.0x1.0x0.024 m

Plywood

16.2 kg

4

Floor panel (PH)

1.5x1.0x0.024 m

Plywood

24.3 kg

5

Floor panel (PH)

2.0x0.5x0.024 m

Plywood

16.2 kg

6

Floor panel (PH)

2.0x1.0x0.024 m

Plywood

32.4 kg

Construction panels for modular system usage Item Description

Coated with phenol resin on both sides (dark brown, rough surface on one side); edges varnished; with positioning angles; drilled vertically with the system dimensions; used for intermediate levels where people walk

46

LxWxD

Material

Weight

1

Construction panel (PH)

0.5x0.5x0.024 m

Plywood

4.0 kg

2

Construction panel (PH)

1.0x0.5x0.024 m

Plywood

8.1 kg

3

Construction panel (PH)

1.0x1.0x0.024 m

Plywood

16.2 kg

4

Construction panel (PH)

1.5x1.0x0.024 m

Plywood

24.3 kg

5

Construction panel (PH)

2.0x0.5x0.024 m

Plywood

16.2 kg

6

Construction panel (PH)

2.0x1.0x0.024 m

Plywood

32.4 kg


Ventum-S modular system for solutions

Intermediate frame Product selection

Intermediate frame for Praktikabel and bridge structural elements Item Description

Intermediate frames are assembled on level areas where people do not walk so as to provide the system height. There is a 90% weight reduction in comparison with a floor panel.

LxWxD

Material

Weight

1

Intermediate frame

0.5x0.5x0.025 m

AL (untreated)

1.2 kg

2

Intermediate frame

1.0x0.5x0.025 m

AL (untreated)

1.7 kg

3

Intermediate frame

1.0x1.0x0.025 m

AL (untreated)

1.5 kg

4

Intermediate frame

1.5x1.0x0.025 m

AL (untreated)

2.7 kg

5

Intermediate frame

2.0x0.5x0.025 m

AL (untreated)

2.7 kg

6

Intermediate frame

2.0x1.0x0.025 m

AL (untreated)

3.2 kg

Safety rails Product selection

Stage safety rails for Praktikabel and bridge structural elements; not safety rails for a public area. Finish with or without a base board.

Stage safety rails – non-public area Item Description

Stage safety rails for Praktikabel structural elements and bridge section structural elements, no railings according to DIN 1055; screw fitting;

Height / Width

Material

Weight

1

Safety rail (stage)

h=1.0 m/w=1.0 m

AL (untreated)

3.3 kg

2

Safety rail (stage)

h=1.0 m/w=1.0 m/base board

AL (untreated)

4.3 kg

3

Safety rail (stage)

h=1.0 m/w=1.5 m

AL (untreated)

6.7 kg

4

Safety rail (stage)

h=1.0 m/w=1.5 m/base board

AL (untreated)

6.8 kg

5

Safety rail (stage)

h=1.0 m/w=2.0 m

AL (untreated)

7.4 kg

6

Safety rail (stage)

h=1.0 m/w=2.0 m/base board

AL (untreated)

8.8 kg

9

Skirting board extra

Per m

AL (untreated)

0.7 kg

with or without a base board

47


VEntuM-s systEM raMPs

48


Ventum-s ModuLar systEM For soLutIons

Ventum-s system ramPs Variability for inclines.

the system: the bridge structural elements ae set up in conjunction with the initial slopes and adapter elements to form system ramps. By combining several bridge structural elements, it is possible to create areas with variable sizes. the adapters are made as standard features for 1/6 and 1/12 inclines. the ramps always end at a system height and can be supplemented with modular system structures. ! Elliptical stage ramp

system usage:

" ramp adapter

the system ramps have excellent transverse and longitudinal stability and can be adapted to the desired substructure height by combining them with Praktikabel structural elements in variable ways. other uses: 5 transport ramp for a grand piano 5 access for the disabled

special designs: compatibility within the modular system is used for special designs. the bridge structural elements form the load bearing structure and the rigid structural elements provide the geometric shapes that you require. We accompany projects with our development, planning and production work from the initial idea to its implementation.

! ramp initial section

49


VEntuM-s systEM raMPs

! nordhausen ramp project

50


Ventum-S modular system for solutions

Ventum-S system ramps Product selection

Ramp adapters Item Description

LxW

Material

Weight

1

Ramp adapter 1/6

1.0x1.0 m

AL (untreated)

6.1 kg

2

Ramp adapter 1-1/12

1.0x1.0 m

AL (untreated)

5.8 kg

3

Ramp adapter 2-1/12

1.0x1.0 m

AL (untreated)

5.3 kg

Incline

Material

Ramp initial section Item Description 1

Ramp initial section 1/6

for 1/6 ramp

Al/plywood

2

Ramp initial section 1/12

for 1/12 ramp

Al/plywood

Lean-to initial sections of ramps consisting of bridge structural elements with a 1/6 or 1/12 incline (+5.0 mm on +141.6 mm), wedge made of wood Initial sections for other ramps or with a solid aluminium wedge available on request.

51


VEntuM-s sPEctator stands

52


Ventum-S modular system for solutions

Stands Variable spectator stands using the modular system principle.

The system: The Ventum-S modular system creates stands quickly and with great variations. The specially reinforced Praktikabel structural elements for stands are designed for use in areas accessible to the public. They are similar to the standard Praktikabel structural elements in their functions and modular system usage and can also be utilised for scenery and decoration purposes. A stand design can then become part of the basic modular system equipment after its original use.

! Praktikabel structural element with corner bracket

The modular system for stands:

Stand Praktikabel structural elements:

The Praktikabel and bridge structural elements form the basic structure. The modular system step height of 166.6 mm is suitable for use if there is little space available. When using the double height (333.3 mm), the view from all the seats is ideal. When setting up stands in the public arena, we supply all the necessary certification in line with the requirements. We design the necessary accessories like safety rails, intermediate frames and step lighting in line with individual plans and as part of our consultancy work.

The load rating in the standard Praktikabel structural elements when used as stands is achieved through welded corner brackets or diagonal struts. They clearly distinguish the standard Praktikabel structural elements from the stand Praktikabel structural elements.

53


VEntuM-s sPEctator stands

fiVe stand oPtions from one range of Parts We can advise you individually so that you obtain the best possible configuration for your stand project

54

you purchase one solution from us and obtain a range of solutions for subsequent projects – your investment will pay off over and again – definitely.


Ventum-s ModuLar systEM For soLutIons

55


Ventum-S spectator stands

Stand Praktikabel structural elements Product selection

Stand Praktikabel structural elements 1.0 x 1.0 x h Item Description

LXWXH

Material

Weight

1

Praktikabel structural element (T)

1.0x1.0x0.166 m

AL (untreated)

7.1 kg

2

Praktikabel structural element (T)

1.0x1.0x0.333 m

AL (untreated)

7.9 kg

3

Praktikabel structural element (T)

1.0x1.0x0.500 m

AL (untreated)

8.8 kg

4

Praktikabel structural element (T)

1.0x1.0x0.666 m

AL (untreated)

9.7 kg

5

Praktikabel structural element (T)

1.0x1.0x0.833 m

AL (untreated)

10.6 kg

6

Praktikabel structural element (T)

1.0x1.0x1.000 m

AL (untreated)

11.5 kg

7

Praktikabel structural element (T)

1.0x1.0x1.166 m

AL (untreated)

12.3 kg

8

Praktikabel structural element (T)

1.0x1.0x1.333 m

AL (untreated)

13.2 kg

9

Praktikabel structural element (T)

1.0x1.0x1.500 m

AL (untreated)

14.1 kg

10

Praktikabel structural element (T)

1.0x1.0x1.666 m

AL (untreated)

15.0 kg

11

Praktikabel structural element (T)

1.0x1.0x1.833 m

AL (untreated)

15.8 kg

12

Praktikabel structural element (T)

1.0x1.0x2.000 m

AL (untreated)

16.7 kg

Substructure Praktikabel structural elements l x 1.0 x 2.0 Item Description

56

LXWXH

Material

Weight

1

Praktikabel structural element (U)

1.0x1.0x2.0 m

AL (untreated)

22.0 kg

2

Praktikabel structural element (U)

2.0x1.0x2.0 m

AL (untreated)

32.0 kg


Ventum-S modular system for solutions

Stand Praktikabel structural elements 2.0 x 1.0 x h Item

Description

LXWXH

Material

Weight

1

Praktikabel structural element (T)

2.0x1.0x0.166 m

AL (untreated)

9.9 kg

2

Praktikabel structural element (T)

2.0x1.0x0.333 m

AL (untreated)

11.2 kg

3

Praktikabel structural element (T)

2.0x1.0x0.500 m

AL (untreated)

12.5 kg

4

Praktikabel structural element (T)

2.0x1.0x0.666 m

AL (untreated)

13.8 kg

5

Praktikabel structural element (T)

2.0x1.0x0.833 m

AL (untreated)

15.1 kg

6

Praktikabel structural element (T)

2.0x1.0x1.000 m

AL (untreated)

16.5 kg

7

Praktikabel structural element (T)

2.0x1.0x1.166 m

AL (untreated)

17.8 kg

8

Praktikabel structural element (T)

2.0x1.0x1.333 m

AL (untreated)

19.1 kg

9

Praktikabel structural element (T)

2.0x1.0x1.500 m

AL (untreated)

20.4 kg

10

Praktikabel structural element (T)

2.0x1.0x1.666 m

AL (untreated)

21.7 kg

11

Praktikabel structural element (T)

2.0x1.0x1.833 m

AL (untreated)

23.0 kg

12

Praktikabel structural element (T)

2.0x1.0x2.000 m

AL (untreated)

24.4 kg

Safety rails in the public area Product selection

Safety rail structural elements – public areas Item Description 1

Price available on request

57


ModuLar systEM ModuLE IntEgratIon

58


Ventum-S modular system for solutions

Modular system module integration Move and lock stage carriages in a defined way.

The system: The bridge structural elements used as a stage carriage serve as the basic framework for motors, locking modules, steering equipment and rechargeable batteries. The opportunities for using stage carriages are extended in the system so that they move or lock in a defined manner.

Performance data: 5 Driving power: 0.4 / 1.5 kW 5 Contact pressure: 1.0 kN 5 Height: 166.6 mm 5 Battery operations: 4 h width 80 locking procedures 5 Charging time: < 10 h depending on how flat the batteries are

Locking device: to halt stage carriages during scenes and in stage settings. The locking device offers safety and freedom of movement for stage structures that move during the show and are used in stationary mode. The requirements for use on the stage are ideally met with contact pressure of 1.0 kN and reliable electric locking modules.

The system structure: 5 Modular system that can be extended at will 5 Basic module with 4 locks and one set of controls 5 Operated by remote controls and directly 5 Optional adaptable remote controls for operating several modules 5 Battery charging through a charging socket from outside while still inserted (without having to remove the panel or the decorations).

! Controls for locking device

59


ModuLar systEM ModuLE IntEgratIon

Motorised power units: to move stage carriages and sets on stage. the drive and control options are adjusted ideally to the project re-quirements: from a simple straight ahead movement to free mobility and even defined sequences of movements.

the system structure:

Performance data:

5 Modular system that can be extended at will 5 External/integrated control unit 5 direct/remote controls 5 Mains/battery operations

5 driving power: 5 torque: 5 nominal rpm: 5 Height: 5 operating mode:

! Bridge drive module

60

0.4 /1.5 kW 2.56/10.2 nm 1360/1400 1/min 166.6/200 mm s1 (permanent)


Ventum-s ModuLar systEM For soLutIons

stage Carriage loCks Product selection

Locking device for stage carriages ItEM dEscrIPtIon 1

Locking device

Locking module

2

Locking device

controls

bridge driVe modules Product selection

Bridge drive module ItEM dEscrIPtIon 1

Price available on request

61


turntaBLE ModuLar systEM

62


Ventum-S modular system for solutions

Turntable modular system Aluminium frame design and panels for variable turntables.

Ventum-S turntables Rotating ring design The system:

! Turntable Ø4.0 m

The Ventum-S rotating ring turntables develop the modular system principle even further in a logical way. The example of the 8.0 m turntable illustrates the modular system very well: a turntable with a diameter of 8.0 m can also be used for 4.0 m and 6.0 m sizes. Turning rings, which expand the 4.0 m inner ring, can be used separately and combined with each other.

! Turning ring Ø4.0 m expanded to Ø6.0 m

Turntable options:

Key parameters:

5 Ø4.0 m 5 Ø6.0 m 5 Ø8.0 m

5 Height: 5 Load rating: 5 Type of drive:

Turning ring options:

Dimensions:

5 Ø4.0 m expanded to Ø6.0 m 5 Ø4.0 m expanded to Ø8.0 m 5 Ø6.0 m expanded to Ø8.0 m

5 Diameter: 5 Turning rings: 5 Height:

There are therefore six turntable options with a Ventum-S 8.0 m turntable.

166.6 mm 2.5 kN/m2 optionally up to 5.0 kN/m2 Inner or outer drive system

4.0 / 5.0 / 6.0 / 7.0 ... 14.0 m from Ø4.0 m at 1.0 m-intervals 0.166 / 0.200 m

We can provide special dimensions for the intervals, if required.

The turning rings can also be operated as counterrotating units.

63


turntaBLE ModuLar systEM

turning ring turntable Ø8 m in the siX design oPtions

turntable: Ø4.0 m

turntable: Ø6.0 m

turntable: Ø8.0 m

64


Ventum-s ModuLar systEM For soLutIons

turning ring: Ø4.0 expanded to Ø6.0 m

turning ring: Ø6.0 expanded to Ø8.0 m

turning ring: Ø4.0 expanded to Ø8.0 m

65


Turntable modular system

Ventum-S turntables Bridge design The system: Turntables can be created from bridge structural elements in the Ventum-S modular system. The combination of bridge units with turning centres, wheel sockets and matching parts enables you to use the bridge structural elements that you already own in an ideal manner and generates 50% lower costs than a new aluminium structure. This supplements your use of basic bridge structural elements and allows you to create turntables with the desired diameters. Dimensions: 5 Height: 5 Diameter:

! Turning centre turntable, bridge design

! Matching part for turntable, bridge design

200 mm on request

Key parameters: 5 Load rating: 2.5 kN/m2 optionally up to 5.0 kN/m2 5 Type of drive: internal drive

! Turntable, bridge design

66

! Matching part for turntable, bridge design


Ventum-S modular system for solutions

Turntable panel Turntable panel for rotating ring design: The floor panels are segmented in line with the basic structure and designed with several corners at the crossover areas of the rotating rings. The outer ring for the turntable configuration is round in each case.

! Panel for inner circle, rotating ring design

The floor panels are equipped with a direct vertical mounting as a standard feature and are laid on the aluminium substructure. A locking device is available as an option.

! Panel for attached ring, rotating ring design

Turntable panel, bridge design: The floor panels are used in rectangular form in line with the dimensions of the bridge structural elements and are supplemented with rounded matching parts so that you create the diameters that you require. The floor panels are equipped with a direct vertical mounting as a standard feature and are laid on the aluminium substructure.

! Complete panel, rotating ring design

A locking device is available as an option.

Surfaces: 5 Plywood â&#x20AC;&#x201C; dark brown, coated with phenol resin (ph) 5 Plywood varnished with the colour of ebony 5 Other coatings available on request

67


Turntable modular system

Turntables, rotating ring design Product selection

Basic inner ring structure Item Description 1

Basic inner ring structure

Outer diameter

Material

Weight

Ø4.0 m

AL (untreated)

103.0 kg

Polygon, solidly welded individual segments for assembly with screws; central support rotating ring; friction ring on the outer diameter; compatible with 4.0 m attached rings Height for outer drive 141.6 mm / for inner drive 175 mm Other diameters available on request!

Basic structure of attached ring Item Description 1 2 3 4 5 Polygon, solidly welded individual segments for assembly with screws; friction ring with outer diameter; compatible with attached rings on the inner and outer diameters; usable as a separate turning ring Height: for outer drive 141.6 mm /  for inner drive 175 mm Other diameters available on request!

68

6 7 8

Basic structure of attached ring Basic structure of attached ring Basic structure of attached ring Basic structure of attached ring Basic structure of attached ring Basic structure of attached ring Basic structure of attached ring Basic structure of attached ring

Innen- /Outer diameter

Material

Weight

Ø4.0 m expanded to Ø6.0 m

AL (untreated)

150.0 kg

Ø4.0 m expanded to Ø7.0 m

AL (untreated)

216.0 kg

Ø4.0 m expanded to Ø8.0 m

AL (untreated)

245.0 kg

Ø6.0 m expanded to Ø8.0 m

AL (untreated)

175.0 kg

Ø6.0 m expanded to Ø9.0 m

AL (untreated)

221.0 kg

Ø8.0 m expanded to Ø10.0 m

AL (untreated)

462.0 kg

Ø8.0 m expanded to Ø11.0 m

AL (untreated)

632.0 kg

Ø8.0 m expanded to Ø12.0 m

AL (untreated)

817.0 kg


Ventum-S modular system for solutions

Complete basic structure Item Description

Polygon, solidly welded individual segments for assembly with screws; friction ring with outer diameter; compatible with attached rings.

Outer diameter

Material

Weight

1

Basic structure of turntable

Ø6.0 m

AL (untreated)

253.0 kg

2

Basic structure of turntable

Ø7.0 m

AL (untreated)

319.0 kg

3

Basic structure of turntable

Ø8.0 m

AL (untreated)

348.0 kg

4

Basic structure of turntable

Ø9.0 m

AL (untreated)

474.0 kg

5

Basic structure of turntable

Ø10.0 m

AL (untreated)

810.0 kg

6

Basic structure of turntable

Ø11.0 m

AL (untreated)

980.0 kg

7

Basic structure of turntable

Ø12.0 m

AL (untreated)

1,165.0 kg

Other diameters available on request!

Turntables with bridge design Product selection

Turntables with bridge design Item Description 1

Price available on request

Basic structure from bridge structural elements, equipped with turning centre, wheels and drive/control components, supplemented by polygonshaped matching parts.

69


Turntable modular system

Turntable panels Product selection

Panel for inner circle (coated with phenol resin) Item

Description

Outer diameter

Material

Weight

1

Panel for inner circle (m/ph)

Ø4.0 m

Plywood

204.0 kg

2

Panel for inner circle (r/ph)

Ø4.0 m

Plywood

204.0 kg

Plywood, coated dark brown with phenol resin (ph) on the outer diameter, rounded (r) as a separate turntable or polygon-shaped (m) for use with attached rings; segmented according to the basic structure; laid on top Other diameters available on request!

Panel for attached ring (polygon-shaped/coated with phenol resin) Item Description

Plywood, coated dark brown with phenol resin

Innen- /Outer diameter

Material

Weight

1

Panel for attached ring (m/ph)

Ø4.0 m to Ø6.0 m

Plywood

255.0 kg

2

Panel for attached ring (m/ph)

Ø4.0 m to Ø7.0 m

Plywood

420.0 kg

3

Panel for attached ring (m/ph)

Ø4.0 m to Ø8.0 m

Plywood

611.0 kg

4

Panel for attached ring (m/ph)

Ø6.0 m to Ø8.0 m

Plywood

356.0 kg

5

Panel for attached ring (m/ph)

Ø6.0 m to Ø9.0 m

Plywood

573.0 kg

6

Panel for attached ring (m/ph)

Ø8.0 m to Ø10.0 m

Plywood

458.0 kg

7

Panel for attached ring (m/ph)

Ø8.0 m to Ø11.0 m

Plywood

725.0 kg

8

Panel for attached ring (m/ph)

Ø8.0 m to Ø12.0 m

Plywood

1,018.0 kg

(ph); polygon-shaped on the inner and outer diameters (m) for use with other attached rings; segmented according to the basic structure; laid on top Other diameters available on request!

70


Ventum-S modular system for solutions

Panel for attached ring (rounded/coated with phenol resin) Item Description

Plywood, coated dark brown with phenol resin

Innen- /Outer diameter

Material

Weight

1

Panel for attached ring (r/ph)

Ø4.0 m to Ø6.0 m

Plywood

255.0 kg

2

Panel for attached ring (r/ph)

Ø4.0 m to Ø7.0 m

Plywood

420.0 kg

3

Panel for attached ring (r/ph)

Ø4.0 m to Ø8.0 m

Plywood

611.0 kg

4

Panel for attached ring (r/ph)

Ø6.0 m to Ø8.0 m

Plywood

356.0 kg

5

Panel for attached ring (r/ph)

Ø6.0 m to Ø9.0 m

Plywood

573.0 kg

6

Panel for attached ring (r/ph)

Ø8.0 m to Ø10.0 m

Plywood

458.0 kg

7

Panel for attached ring (r/ph)

Ø8.0 m to Ø11.0 m

Plywood

725.0 kg

8

Panel for attached ring (r/ph)

Ø8.0 m to Ø12.0 m

Plywood

1,018.0 kg

(ph), polygon-shaped on the inner diameter, rounded (r) on the outer diameter for use as an end ring; segmented according to the basic structure; laid on top Other dimensions available on request!

Complete panel (coated with phenol resin) Item

Plywood, coated dark brown with phenol resin (ph), rounded on the outer diameter; segmented according to the basic structure; laid on top

Description

Outer diameter

Material

Weight

1

Panel for turntable (ph)

Ø6.0 m

Plywood

458.0 kg

2

Panel for turntable (ph)

Ø7.0 m

Plywood

624.0 kg

3

Panel for turntable (ph)

Ø8.0 m

Plywood

814.0 kg

4

Panel for turntable (ph)

Ø9.0 m

Plywood

1,031.0 kg

5

Panel for turntable (ph)

Ø10.0 m

Plywood

1,272.0 kg

6

Panel for turntable (ph)

Ø11.0 m

Plywood

1,540.0 kg

7

Panel for turntable (ph)

Ø12.0 m

Plywood

1,832.0 kg

Other diameters available on request!

71


Turntable modular system

Panel for inner circle (varnished with ebony wood colour) Item

Description

Outer diameter

Material

Weight

1

Panel for inner circle (m/eb)

Ø4.0 m

Plywood

204.0 kg

3

Panel for inner circle (r/eb)

Ø4.0 m

Plywood

204.0 kg

Plywood, varnished with ebony wood colour (eb), rounded (r) on the outer diameter as a separate turntable or polygon-shaped (m) for use with attached rings; segmented according to the basic structure; laid on top Other diameters available on request!

Panel for attached ring (polygon-shaped/varnished with ebony wood colour)

Item Description

Plywood, varnished with ebony wood colour (eb); polygon-shaped on the inner and outer diameter (r) for use with other attached rings; segmented according to the basic structure; laid on top Other dimensions available on request!

72

Innen- /Outer diameter

Material

Weight

1

Panel for attached ring (m/eb)

Ø4.0 m to Ø6.0 m

Plywood

255.0 kg

2

Panel for attached ring (m/eb)

Ø4.0 m to Ø7.0 m

Plywood

420.0 kg

3

Panel for attached ring (m/eb)

Ø4.0 m to Ø8.0 m

Plywood

611.0 kg

4

Panel for attached ring (m/eb)

Ø6.0 m to Ø8.0 m

Plywood

356.0 kg

5

Panel for attached ring (m/eb)

Ø6.0 m to Ø9.0 m

Plywood

573.0 kg

6

Panel for attached ring (m/eb)

Ø8.0 m to Ø10.0 m

Plywood

458.0 kg

7

Panel for attached ring (m/eb)

Ø8.0 m to Ø11.0 m

Plywood

725.0 kg

8

Panel for attached ring (m/eb)

Ø8.0 m to Ø12.0 m

Plywood

1,018.0 kg


Ventum-S modular system for solutions

Panel for attached ring (rounded/varnished with ebony wood colour) Item Description

Plywood, varnished with ebony wood colour (eb); polygon-shaped on the inner and outer diameter (r) for use as an end ring; segmented according to the basic structure; laid on top Other dimensions available on request!

Innen- /Outer diameter

Material

Weight

1

Panel for attached ring (r/eb)

Ø4.0 m to Ø6.0 m

Plywood

255.0 kg

2

Panel for attached ring (r/eb)

Ø4.0 m to Ø7.0 m

Plywood

420.0 kg

3

Panel for attached ring (r/eb)

Ø4.0 m to Ø8.0 m

Plywood

611.0 kg

4

Panel for attached ring (r/eb)

Ø6.0 m to Ø8.0 m

Plywood

356.0 kg

5

Panel for attached ring (r/eb)

Ø6.0 m to Ø9.0 m

Plywood

573.0 kg

6

Panel for attached ring (r/eb)

Ø8.0 m to Ø10.0 m

Plywood

458.0 kg

7

Panel for attached ring (r/eb)

Ø8.0 m to Ø11.0 m

Plywood

725.0 kg

8

Panel for attached ring (r/eb)

Ø8.0 m to Ø12.0 m

Plywood

1,018.0 kg

Outer diameter

Material

Weight

Complete panel (varnished with ebony wood colour) Item Description 1

Panel for turntable (eb)

Ø6.0 m

Plywood

458.0 kg

2

Panel for turntable (eb)

Ø7.0 m

Plywood

624.0 kg

3

Panel for turntable (eb)

Ø8.0 m

Plywood

814.0 kg

4

Panel for turntable (eb)

Ø9.0 m

Plywood

1,031.0 kg

5

Panel for turntable (eb)

Ø10.0 m

Plywood

1,272.0 kg

ding to the basic structure; laid on top

6

Panel for turntable (eb)

Ø11.0 m

Plywood

1,540.0 kg

Other diameters available on request!

7

Panel for turntable (eb)

Ø12.0 m

Plywood

1,832.0 kg

Plywood, varnished with ebony wood colour (eb), rounded on the outer diameter; segmented accor-

73


Turntable drive systems

Turntable drive systems Ventum-S turntable drive modules External 1.5 kW drive modules:

Internal 0.4/1.5 kW drive modules:

The external drive modules have been specially developed for Ventum-S turntables. The drives are assembled very easily. To start operating the unit, the drive module is fixed to the stage floor by screws and is then pressed on to the turntableâ&#x20AC;&#x2122;s friction ring using a spring adjustment. An oscillating bearing evens out any uneven elements on the running surface and ensures uniform contact pressure. External drives can be used both for complete turntables and also for turning rings that run separately. Pressure rollers are mounted for turning rings in order to guide the turntable in its position.

The internal drive modules are designed as friction wheel drive systems for insertion in the aluminium construction. They consist of a DC asynchronous motor, planetary gearing and a Vulkollan drive wheel. A low-noise locking brake, spring-loaded bearings and systems for controlling the positioning and sequences are available as options.

Key parameters: 5 Power voltage: 230 V, 400 V - at 50 Hz 5 Max. peripheral force: 1000 N 5 Height: 166.6 mm, 141.6 mm Can be inserted in substructure without a panel 5 Drive system: S1 (permanent drive) 5 Number of drives: depends on dynamic load rating

# Outer drive

74

Key parameters for 0.4/1.5 kW: 5 Power voltage: 230V, 400V - at 50Hz 5 Nominal rpm: 1360/1400 1/min 5 Nominal torque: 2.56/10.2 Nm 5 Max. torque: 5.37/16.6 Nm 5 Type of drive: S1 (permanent) 5 Height: 166.6/200 mm 5 Number of drives: depends on dynamic load rating

! Inner drive


Ventum-s ModuLar systEM For soLutIons

Ventum-s turntable controls Ventum-s turntable controls: the basic control unit is linked to a cable, has an infinitely variable speed regulator, is equipped for a maximum circumferential speed of 1 m/2 with a choice of direction of rotation (left/right) and has an emergency off switch. The unit is operated via a control unit or a control/remote control panel that is available as an option. the basic functions can be extended by any number of control options. ! remote controls

Control options: 5 control panel/remote controls 5 Positioning and controlling sequences

Ventum-s slip rings function:

the detailed design of the turntable controls is agreed for each project.

turning centres with slip ring transmitters are available to transmit the power and information. Internal drive modules require one slip ring turning centre to feed in the power. the slip ring is optional for external drive modules. technical data: 5 Height: 166.6/200 mm 5 Inserted: in the Ă&#x2DC;400 mm turning centre 5 Detailed configuration for each project

# control panel with display

75


Turntable drive systems

Turntable drive systems Product selection

Drive systems and controls are configured and assembled for each project.

External drive module - 1.5 kW Item Description 1

Price and configuration on request.

Internal drive module 0.4/1.5 kW Item Description 1

76

Price and configuration on request.


Ventum-S modular system for solutions

77


sPEcIaL aLuMInIuM structurEs

78


Ventum-s ModuLar systEM For soLutIons

sPeCial aluminium struCtures Expertise and ideas in aluminium.

Ventum-s stands for expertise in aluminium. We provide our customers with more than 20 years of experience as a professional aluminium welding company. We handle individual requirements and pay attention to all the details, ranging from developing the idea to production.

Project development: 5 Feasibility studies 5 developing solutions with static tests

Project work: 5 complete design work in 3d 5 Production

! cube designs for vehicles and people LandesbĂźhnen sachsen (theatre in radebeul)

Project partnership: We complete project teams with our expertise and precision in line with your requirements, if required. our engineers are available to help you throughout the course of the project in a constructive manner and guarantee that deadlines are always met.

! s-shaped curved ramp for the state operetta dresden

$ see-saw for use on stage at the gĂśrlitz-Zittau theatre

79


PLug-In FEEt PLatForMs

80


Ventum-S modular system for solutions

Plug-in feet platforms Quick. Robust. Efficient.

The plug-in feet platforms guarantee low costs and they can be used in a variety of different ways for simple stage construction work. The platforms are made available in two options in conjunction with Mott Mobile Systeme GmbH & Co. KG. It is crucial to know whether the platforms are going to be used in non-public or public areas. The Praktikus platform system is used for stages, while the Dino platform system is used for spectator areas.

Technical data for Praktikus:

Technical data for Dino:

5 Area: 5 Structural height: 5 Step height: 5 Plug-in feet dim.: 5 Stacking height: 5 Use:

5 Area: 5 Structural height: 5 Step height: 5 Plug-in feet dim.: 5 Stacking height 5 Use:

2.0 x 1.0 m 1.0 m(without diagonals) 200 mm 45x45 mm / 60x60 mm 90 mm on stage

! Praktikus platform with plug-in feet

2.0 x 1.0 m 2.0 m (without diagonals) 200 mm 60x60 mm 120 mm on stage and in public areas

! Dino platform with plug-in feet

81


Plug-in feet platforms

Plug-in feet platforms Product selection

Praktikus platform system Item

Description

Dimensions

Material

Weight

1

Praktikus platform 750

2.0x1.0 m

AL (untreated)

14.5 kg

2

Beechwood platform 21 mm

2.0x1.0 m

Beechwood (glazed)

23.0 kg

With 21 mm block board (varnished), other stage floors available on request Without plug-in feet

Plug-in feet 45x45 Item

Made of aluminium piping 45x45x2.5; with a non-adjustable cap

Description

Height

Material

1

Praktikus plug-in foot

0.2 m

AL (untreated)

0.2 kg

2

Praktikus plug-in foot

0.4 m

AL (untreated)

0.4 kg

3

Praktikus plug-in foot

0.6 m

AL (untreated)

0.5 kg

4

Praktikus plug-in foot

0.8 m

AL (untreated)

0.7 kg

5

Praktikus plug-in foot

1.0 m

AL (untreated)

0.8 kg

6

Praktikus plug-in foot

1.2 m

AL (untreated)

1.0 kg

7

Praktikus plug-in foot

1.4 m

AL (untreated)

1.2 kg

(Step height of 166 mm on request)

Telescopic plug-in feet 45x45 Item 1

Description Price available on request

Various designs available

82

Weight


Ventum-S modular system for solutions

Dino platform system Item

Description

Dimensions

Material

Weight

1

Dino platform

2.0x1.0 m

AL (untreated)

14.5 kg

2

Beechwood platform 25 mm

2.0x1.0 m

Beechwood (glazed)

27.0 kg

With 25 mm wood core plywood (varnished), other stage floors available on request Without plug-in feet

Plug-in feet 60x60 Item

Made of aluminium piping 45x45x2.5; with a non-adjustable cap

Description

Height

Material

Weight

1

Dino plug-in foot

0.2 m

AL (untreated)

0.4 kg

2

Dino plug-in foot

0.4 m

AL (untreated)

0.7 kg

3

Dino plug-in foot

0.6 m

AL (untreated)

0.9 kg

4

Dino plug-in foot

0.8 m

AL (untreated)

1.1 kg

5

Dino plug-in foot

1.0 m

AL (untreated)

1.8 kg

6

Dino plug-in foot

1.2 m

AL (untreated)

2.2 kg

7

Dino plug-in foot

1.4 m

AL (untreated)

2.6 kg

(Step height of 166 mm on request)

Telescopic plug-in feet 60x60 Item 1

Description Price available on request

Various designs available

83


Papiermühlengasse 12-14 · D · 01159 Dresden Telefon: +49 351 4940359 · Fax: +49 351 4901993 info@ventum-s.com · www.ventum-s.com

Profile for Ventum-S

Ventum-S products EN catalogue  

WE BRING ALUMINIUM ON TO THE STAGE. We are a systems provider for stage sets, scenic structures, spectator stands, temporary turntables and...

Ventum-S products EN catalogue  

WE BRING ALUMINIUM ON TO THE STAGE. We are a systems provider for stage sets, scenic structures, spectator stands, temporary turntables and...

Advertisement