Page 1

Automatizare Plase de Insecte

Usi Rezistente la Foc

Usi de Usi de Garaj Garaj

TOTHE ENV ING IR UT

T MEN ON

CONT RIB

Rulouri Exterioare

calitate & rezistenta quality & durability


index

3 Swing gates

22 Sliding gates

33 Road barriers

38 Shutters and awings

47 Rolling shutters

53 Accessories

60 Control units

66 Sliding doors automations

1


Swing Gates Porți Batante


PM1

Electromechanical operator for swing gates 230 V

Irreversible, leaf length up to 3,5 m

PM Reversible, leaf length up to 3,5 m

PM • PM1

lineare 230V

• Sturdy aluminum structure • Rod stroke mm 300 - mm 400 - mm 600 • Stainless steel rod with dust scraper • Very quiet operation • Electric motor with electrobrake (Pm1) • Thermal cut out 140° • Manual release with customized key • Lithium grease lubrications of mechanical parts against corrosion, oxidation and rust • 120° opening • Quick installation with multi-position brackets • Anti-squashing system •* Slowing down function • Power supply 230 Vac * functions guaranteed with VDS electronics devices

Performance requirements • Operating cycle • Frequency of use • Opening time • Thrust

Technical features

Pm - Pm 1

• Power supply

230 Vac

• Leaf weight

250 Kg

• Leaf length

1,80 - 2,50 - 3,50 mt.

• Engine rpm

800 rpm

Average absorption

1A

• Absorbed power

250 W

• Standard limit switch

NO

• Condenser

12,5 uF

• Operator weight

7,5 Kg

• Noise level

< 30 dBA

• Environmental conditions

-20/+55° C

• Degree of protection

IP55

3

Semi-intensivo 50% 15 - 25 -30 sec. 1500 N


Automations for swing gates

Cod.

Mod.

Features

100053

PM1-300

Stroke 300 mm • leaf up to 1,80 m

100053/1

PM1-400*

Stroke 400 mm • leaf up to 2,50 m

100053/13

PM1-600*

Stroke 600 mm • leaf up to 3,50 m

100052

PM-300**

Stroke 300 mm • leaf up to 1,80 m

100052/1

PM-400**

100053/14

PM-600**

Stroke 600 mm • leaf up to 3,50 m

Cod.

Mod.

Features

121060

CPS-PM

Rod cover • Stroke 300 mm

111

CPS-PM 400

Rod cover • Stroke 400 mm

111/1

CPS-PM 600

Rod cover • Stroke 600 mm

PZ. PALLET 800x1200x1100 30 pz. 235 Kg

Stroke 400 mm • leaf up to 2,50 m

* For Pm1 (irreversible) for leaf longer than 1,80 m is suggested the use of an electro lock ** For Pm (reversible) is always required the use of the electro lock • Is recommended the use of an external aerial to improve radio reception Strong wind and very low temperatures could reduce the performance of the actuator

KIT

Cod. 12/c Pair of photocells

Operators with brackets and condenser

Control unit with built-in receiver and aerial

Cod. 198/5 Key selector

Cod. 23/1 Flashing light

Cod. TX02 Transmitter

Cod.

Mod.

Features

112550

Kit Pm1-300

Swing gate kit for gates up to 3,60 m.

112550/4

Kit Pm1-400*

Swing gate kit for gates up to 5 m.

112542/8

Kit Pm1-600*

Swing gate kit for gates up to 7 m.

112542

Kit Pm-300**

Swing gate kit for gates up to 3,60 m.

112542/4

Kit Pm-400**

Swing gate kit for gates up to 5 m.

112542/6

Kit Pm-600**

Swing gate kit for gates up to 7 m.

Cod. 165B Warning board

Suggested accessories

Cod. 755 pag. 60 Horizontal leaf lock

PZ. PALLET 800x1200x1200 15 pz. 280 Kg

Cod. 265 pag. 60 Vertical leaf lock

Cod. 166 pag. 60 Electric lock

Cod. 244 pag. 63 Stand for photocell

* For Pm1 (irreversible) for leaf longer than 1,80 m is suggested the use of an electro lock ** For Pm (reversible) is always required the use of the electro lock •Is recommended the use of an external aerial to improve radio reception * Strong wind and very low temperatures could reduce the performance of the actuator

4


PM 1 SC Electromechanical operator for swing gates 230 V-24 V

Ireversible, leaf length up to 3 m

linear 230V-24V

• Sturdy aluminum structure • Rod stroke mm 300 - mm 400 - mm 500 • Strong rolled warm shaft • Standard opening limit switch (optional in closing) • Very quiet operation • High-performance electric motor • Thermal cut out 140° • Manual release with key • Lithium grease lubrications of mechanical parts against corrosion, oxidation and rust • 120° opening • Quick installation with multi-position brackets • *(en 12453) Anti-squashing system • *(en 12453) Slowing down function • Power supply 230 v - 24 v • Optional kit battery backup * functions guaranteed with VDS electronics devices

Performance requirements • • • •

Operating cycle Semi-intensive 230 Vac, Intensive 24 Vcc Frequency of use 50% (230 Vac) - 80% (24 Vcc) Opening time 15-25 sec. Thrust 1500 N

Technical characteristics

Pm1 sc 230 V

Pm1 sc 24 V

• Power supply

230 Vac

24 Vcc

• Leaf weight

200 Kg

200 Kg

• Leaf length

1-3 mt.

1-3 mt.

• Engine rpm

1400 rpm

1500 rpm

1A

3A

• Absorbed power

200 W

50 W

• Standard limit switch

Apertura Opening

Apertura Opening

• Condenser

12,5 uF

-

• Operator weight

6,5 Kg

6,5 Kg

• Noise level

< 30 dBA

< 30 dBA

• Environmental conditions

-20/+55° c

-20/+55° c

• Degree of protection

IP55

IP55

Average absorption

5


Automations for swing gates

Cod.

Mod.

100038

PM1 sc - 300 - 230 V

Stroke 300 mm • leaf up to 1,80 m

121820

PM1 sc - 400 - 230 V*

Stroke 400 mm • leaf up to 2,50 m

121820/2

PM1 sc - 500 - 230 V*

Stroke 500 mm • leaf up to 3,00 m

100038/24

PM1 sc - 300 - 24 V

Stroke 300 mm • leaf up to 1,80 m

121841/24

PM1 sc - 400 - 24 V*

Stroke 400 mm • leaf up to 2,50 m

121822/24

PM1 sc - 500 - 24 V*

Stroke 500 mm • leaf up to 3,00 m

PZ. PALLET 800x1200x1100 30 pz. 205 Kg

Features

* For Pm1 sc when the leaf is longer than 1,80 m is suggested the use of an electro lock • Is recommended the use of an external aerial to improve radio reception Strong wind and very low temperatures could reduce the performance of the actuator

KIT

Cod. 12/c Pair of photocells

Operators with brackets and condensers Control unit with built-in receiver and

Cod. 23/1 Flashing light

Cod. 198/5 Key selector

Cod. TX02 Transmitter

Cod.

Mod.

Features

112537/2

Kit Pm1 sc-300 230 V

Swing gate kit for gates up to 3,60 m.

112565

Kit Pm1 sc-400* 230 V

Swing gate kit for gates up to 5 m.

121820/4

Kit Pm1 sc-500* 230 V

Swing gate kit for gates up to 6 m.

112537/24

Kit Pm1 sc-300 24 V

Swing gate kit for gates up to 3,60 m.

112735/24

Kit Pm1 sc-400* 24 V

Swing gate kit for gates up to 5 m.

121822/5

Kit Pm1 sc-500* 24 V

Swing gate kit for gates up to 6 m.

Cod. 165B Warning board

Suggested accessories

Cod. 755 pag. 60 Horizontal leaf lock

PZ. PALLET 800x1200x1200 15 pz. 250 Kg

Cod. 265 pag. 60 Vertical leaf lock

Cod. 166 pag. 60 Electric lock

Cod. 244 pag. 63 Stand for photocell

* For Pm1 sc when the leaf is longer than 1,80 m is suggested the use of an electro lock • Is recommended the use of an external aerial to improve radio reception Strong wind and very low temperatures could reduce the performance of the actuator

6


EGO

Electromechanical operator for swing gates 230 V

Irreversible, leaf length up to 2,5 m

• Sturdy aluminum structure • Rod stroke mm 400 • Stainless steel rod • Optional limit switches • Very quiet operation • High-performance electric motor • Thermal cut out 140° • Manual release with key • Lithium grease lubrications of mechanical parts against corrosion, oxidation and rust • 120° opening • Quick installation with multi-position brackets * • (en 12453) Anti-squashing system • (en 12453) Slowing down*function • Power supply 230 v

Performance requirements • Operating cycle • Frequency of use • Opening time • Thrust

Technical characteristics

Ego-230 Vac

• Power supply

230 Vac

• Leaf weight

200 Kg

• Leaf length

2,5 mt.

• Engine rpm

1400 rpm

• Average absorption

1A

• Absorbed power

200 W

• Standard limit switch

Optional

• Condenser

10 uF

• Operator weight

6,5 Kg

• Noise level

< 30 dBA

• Environmental conditions

-20/+55° C

• Degree of protection

IP55

7

Semi-intesive 230 Vac 50% (230 Vac) 20 sec. 2000 N


Automations for swing gates

Cod.

Mod.

Features

11020

EGO

Stroke 400 mm • leaf up to 2,50 m

PZ. PALLET 800x1200x1100 30 pz. 200 Kg

* For Pm1 sc when the leaf is longer than 1,80 m is suggested the use of an electro lock •Is recommended the use of an external aerial to improve radio reception • Strong wind and very low temperatures could reduce the performance of the actuator

KIT

Control unit with built-in receiver and aerial

2 Operators with brackets and condensers

Cod. 23/1 Flashing light

Cod. 198/5 Key selector

Cod. TX02 Transmitter

Cod.

Mod.

Features

11020/2

Kit EGO-400 230 V

Swing gate kit for gates up to 5 m.

Cod. 12/c Pair of photocells

Cod. 165B Warning board

Suggested accessories

Cod. 755 pag. 60 Horizontal leaf lock

PZ. PALLET 800x1200x1200 15 pz. 230 Kg

Cod. 265 pag. 60 Vertical leaf lock

Cod. 166 pag. 60 Electric lock

Cod. 244 (1 unit) pag. 63 Stand for photocell

* For Pm1 (irreversible) for leaf longer than 1,80 m is suggested the use of an electro lock ** For Pm (reversible) is always required the use of the electro lock • Is recommended the use of an external aerial to improve radio reception • Strong wind and very low temperatures could reduce the performance of the actuator

8


LINEAR 11 Electromechanical operator forAutomations swing gates V-24 V for230 swing gates Irreversible, leaf length up to 3 m

• Sturdy aluminum structure • Rod stroke mm 400 - mm 500 • Stainless steel rod • Optional limit switches • Very quiet operation • High-performance electric motor • Thermal cut out 140° • Manual release with key • Lithium grease lubrications of mechanical parts against corrosion, oxidation and rust • 120° opening • Quick installation with multi-position brackets * • (en 12453) Anti-squashing system • (en 12453) Slowing down*function • Power supply 230 v - 24 v • Optional kit battery backup *functions guaranteed with VDS electronics devices

Performance requirements • Operating cycle • Frequency of use • Opening time • Thrust

Technical characteristics

Linear 11-230 Vac

Linear 11-24 Vcc

• Power supply

230 Vac

24 Vac

• Leaf weight

200 Kg

200 Kg

• Leaf length

3 mt.

3 mt.

• Engine rpm

1400 rpm

1500 rpm

• Average absorption

1A

3A

• Absorbed power

200 W

50 W

• Standard limit switch

Optional

Optional

• Condenser

12,5 uF

-

• Operator weight

6,5 Kg

6,5 Kg

• Noise level

< 30 dBA

< 30 dBA

• Environmental conditions

-20/+55° C

-20/+55° C

• Degree of protection

IP55

IP55

9

Semi-intesive 230 Vac, Intensive 24 Vcc 50% (230 Vac) - 80% (24 Vcc) 20-25 sec. 1500 N


Mod. 100018

Descrizione Features

Irreversibile • Corsa 400 mm • Anta max 2,50 m Stroke 400 mm • leaf up to 2,50 m Linear 11-400* - 230 V Linear 11-500* - 230 V Irreversibile • Corsa 500 mm • Anta max 3 m Stroke 500 mm • leaf up to 3 m

323,00

100018/5 100018/24

Linear 11-400* - 24 V

Irreversibile • Corsa 400 mm • Anta max 2,50 m Stroke 400 mm • leaf up to 2,50 m

334,00

100018/7

Linear 11-500* - 24 V

Irreversibile • Corsa 500 mm • Anta max 3 m Stroke 500 mm • leaf up to 3 m

356,00

PZ. PALLET 800x1200x1100 30 pz. 205 Kg

345,00

* For Linear 11 when the leaf is longer than 1,80 m is suggested the use of an electro lock • Is recommended the use of an external aerial to improve radio reception • Strong wind and very low temperatures could reduce the performance of the actuator

KIT

Cod. 12/c Pair of photocells

2 Operators with brackets and condensers

Cod. 23/1 Flashing light

Cod.

Control unit with built-in receiver and aerial

Cod. 198/5 Key selector

Mod.

Cod. TX02 Transmitter

Cod. 165B Warning board

Features

100018/1

Kit Linear 11 - 400* - 230 V

Swing gate kit for gates up to 5 mt.

100018/4

Kit Linear 11 - 500* - 230 V

Swing gate kit for gates up to 6 mt.

100018/2

Kit Linear 11 - 400* - 24 V

Swing gate kit for gates up to 5 mt.

100019

Kit Linear 11 - 500* - 24 V

Swing gate kit for gates up to 6 mt.

Suggested accessories

Cod. 755 pag. 60 Horizontal leaf lock

PZ. PALLET 800x1200x1200 15 pz. 250 Kg

Cod. 265 pag. 60 Vertical leaf lock

Cod. 166 pag. 60 Electric lock

Cod. 244 (1 unit) pag. 63 Stand for photocell

* For Linear 11 when the leaf is longer than 1,80 m is suggested the use of an electro lock • Is recommended the use of an external aerial to improve radio reception • Strong wind and very low temperatures could reduce the performance of the actuator

10


AMICO DG

Electromechanical operator for swing gates 230 V-24 V

Irreversible, leaf length up to 2,5 m

• Sturdy aluminum die-casting structure • Rod stroke - mm 400 • Sliding nut in bronze • Standard opening and closing limit switches • Very quiet operation • High-performance electric motor • Thermal cut out 140° • Manual release with key accessible by a cover on the top of the operator • Lithium grease lubrications of mechanical parts against corrosion, oxidation and rust • 120° opening • Quick installation with multi-position brackets * • (en 12453) Anti-squashing system • (en 12453) Slowing down *function • Power supply 230 v - 24 v • Optional kit battery backup * functions guaranteed with VDS electronics devices

Requisiti di performance Performance requirements • • • •

Technical characteristics

Uso Operating cycle Semi-intesivo 230 Vac, Intensivo 24 Vcc Frequenza di utilizzo Frequency of use 50% (230 Vac) - 80% (24 Vcc) Tempo di apertura Opening time 20 sec. Forza di spinta Thrust 1500 N

Amico DG 230 Vac

Amico DG 24 Vcc

• Power supply

230 Vac

24 Vcc

• Leaf weight

250 Kg

250 Kg

• Leaf length

2,50 mt

2,50 mt

• Engine rpm

1400 rpm

1800 rpm

• Average absorption

1A

3A

• Absorbed power

200 W

50 W

• Standard limit switch

Apertura - chiusura

Opening - closing

• Condenser

12,5 uF

-

• Operator weight

8,5 Kg

8,5 Kg

• Noise level

< 30 dBA

< 30 dBA

• Environmental conditions

-20/+55°

-20/+55°

• Degree of protection

IP55

IP55

11


Automations for swing gates

Cod.

Mod.

Features

100336

Amico dg - 400 - 230 V

Stroke 400 mm • leaf up to 2,50 m

100336/24

Amico dg - 400 - 24 V

Stroke 400 mm • leaf up to 2,50 m

122842

Amico Key

Lock with customized key

PZ. PALLET 800x1200x1100 30 pz. 250 Kg

• For Amico when the leaf is longer than 1,80 m is suggested the use of an electro lock •Is recommended the use of an external aerial to improve radio reception • Strong wind and very low temperatures could reduce the performance of the actuator

KIT

Cod. 12/c Pair of photocells

2 Operators with brackets and condensers

Cod. 23/1 Flashing light

Control unit with built-in receiver and

Cod. 198/5 Key selector

Cod.

Mod.

Cod. 165B Warning board

Cod. TX02 Transmitter

cod. 122842 Lock with customized key

Features

10002

Kit Amico dg - 400 - 230 V

Swing gate kit for gates up to 5 mt.

10002/24

Kit Amico dg - 400 - 24 V

Swing gate kit for gates up to 5 mt.

Suggested accessories

Cod. 755 pag. 60 Horizontal leaf lock

PZ. PALLET 800x1200x1200 15 pz. 300 Kg

Cod. 265 pag. 60 Vertical leaf lock

Cod. 166 pag. 60 Electric lock

Cod. 244 (1 unit) pag. 63 Stand for photocell

• Is recommended the use of an external aerial to improve radio reception • For Amico when the leaf is longer than 1,80 m is suggested the use of an electro lock • Strong wind and very low temperatures could reduce the performance of the actuator

12


PH1 Irreversible, leaf length up to 5 m

PH Hydraulic swing gates automation 230 V

PH Reversible, leaf length up to 6 m

• Sturdy aluminum structure • Rod stroke - mm 275 - mm 390 • Chromed steel rod with joint uniball • Very quiet operation • Electric motor in bath of oil • Hydraulic adjustment for thrust • Anti-squashing system with by-pass valves • Aluminum rod cover included • Manual release with key • Opening 90° • Quick installation with multi-position brackets • Anti-crushing device* (en 12453) • (en 12453) Slowing down *function • Power supply 230 v

Ph1 needs electro lock

*functions guaranteed with VDS electronics devices

Performance requirements • Operating cycle • Frequency of use • Thrust

Technical characteristics

Intensive 90% 1850/2240 N

Ph

Ph 1

Ph 390

Ph 1 390

• Power supply

230 Vac

230 Vac

230 Vac

230 Vac

• Leaf weight

300 Kg

300 Kg

300 Kg

300 Kg

• Leaf length

1,8 mt.

3 mt.

5 mt.

6 mt.

• Engine rpm

1400 rpm

1400 rpm

1400 rpm

1400 rpm

• Average absorption

1A

1A

1,9A

1,9A

• Absorbed power

250 W

250 W

350 W

350 W

• Condenser

8 uF

8 uF

10 uF

10 uF

• Operator weight

9 Kg

9 Kg

10 Kg

10 Kg

• Noise level

< 30 dBA

< 30 dBA

< 30 dBA

< 30 dBA

• Environmental conditions

-25/+70° c

-25/+70° c

-25/+70° c

-25/+70° c

• Degree of protection

IP55

IP55

IP55

IP55

13


Automations for swing gates

Cod.

Mod.

Features

121913

PH 1

Stroke 275 mm • leaf up to 1,80 m

121927

PH*

Stroke 275 mm • leaf up to 3 m

12384

PH 1

Stroke 390 mm • leaf up to 5 m

12384/1

PH

Stroke 390 mm • leaf up to 6 m

PZ. PALLET 800x1200x1100 36 pz. 370 Kg

*For Ph (reversible) is always required the use of the electro lock •Is recommended the use of an external aerial to improve radio reception • Strong wind and very low temperatures could reduce the performance of the actuator

KIT

Control unit with built-in receiver and aerial

2 Operators with brackets and condensers

Cod. 23/1 Flashing light

Cod. 198/5 Key selector

Cod. TX02 Transmitter

Cod.

Mod.

Features

112570

Kit Ph 1

Swing gate kit for gates up to 3,60 m

112570/1

Kit Ph*

Swing gate kit for gates up to 6,00 m

12384/2

Kit Ph 1

Swing gate kit for gates up to 10 m

12384/3

Kit Ph

Swing gate kit for gates up to 12,00 m

Cod. 12/c Pair of photocells

Cod. 165B Warning board

Suggested accessories

Blocco anta Cod. 755 pag. 60 Horizontal leaf lock

PZ. PALLET 800x1200x1200 14 pz. 390 Kg

Blocco anta verticale Cod. 265 pag. 60 Vertical leaf lock

Elettroserratura Cod. 166 pag. 60 Electric lock

Collonnina fotocellule Cod. 244 (1 unità) pag. 63 Stand for photocell

*For Ph (reversible) is always required the use of the electro lock •Is recommended the use of an external aerial to improve radio reception •Strong wind and very low temperatures could reduce the performance of the actuator

14


PHV Hydraulic swing gates automation 230 V

PHV 240 Reversible/Irreversible, leaf length up to 4 m PHV 360 Reversible/Irreversible, leaf length up to 6 m

• Sturdy aluminum and die-casting structure • Rod stroke - mm 242 (PHV 240) - mm 362 (PHV 360) • Steel rod rectified and chromed 20 mm • Very quiet operation • Electric motor in bath of oil • Valve adjustement for reversibility or irreversibility • Hydraulic adjustement for thrust • Hydraulic slow-down adjustement in closure • Aluminum rod cover included • Manual release with key • 90° opening • Quick installation with multi-position brackets • Power supply 230 v

Performance requirements • Operating cycle • Frequency of use • Outgoing rod time • Ingoing rod time • Max cycles

Technical characteristics

Phv 240

Phv 360

• Power supply

230 Vac

230 Vac

• Leaf weight

600 Kg

800 Kg

• Leaf length

4 mt.

7 mt.

• Max pressure

50 bar

50 bar

• Average absorption

1,1A

1,1A

• Absorbed power

280 W

280 W

• Condenser

16 uF

16 uF

• Operator weight

13,5 Kg

13,5 Kg

• Noise level

< 30 dBA

< 30 dBA

• Environmental conditions

-10/+80° c

-10/+80° c

• Degree of protection

100°

100°

15

Intensive 100% 28 sec. (240) - 40 sec. (360) 28 sec. (240) - 34 sec. (360) 500/gg


Automations for swing gates

Cod.

Mod.

Features

100021

PHV 240*

Stroke 242 mm • leaf up to 4 m

100022

PHV 360**

Stroke 362 mm • leaf up to 7 m

PZ. PALLET 800x1200x1200 20 pz. 280 Kg

*For Phv 240, for leaf longer than 1,80 m is required the use of the electro lock **For Phv 340, for leaf longer than 1,80 m is required the use of the electro lock • Is recommended the use of an external aerial to improve radio reception • Strong wind and very low temperatures could reduce the performance of the actuator

KIT

Cod. 12/c Pair of photocells

2 Operators with brackets and condensers

Cod. 23/1 Flashing light

Control unit with built-in receiver and aerial

Trasmettitore Multi 4 Cod. TX02 Transmitter

Cod. 198/5 Key selector

Cod.

Mod.

112581/1

Kit Phv 240*

Swing gate kit for gates up to 8 m

112581/2

Kit Phv 360**

Swing gate kit for gates up to 14 m

Cod. 165B Warning board

Features

Suggested accessories

Cod. 755 pag. 60 Horizontal leaf lock

Cod. 265 pag. 60 Vertical leaf lock

Cod. 166 pag. 60 Electric lock

Cod. 244 (1 unit) pag. 63 Stand for photocell

PZ. PALLET * For Phv 240, for leaf longer than 1,80 m is required the use of the electro lock 800x1200x1200 ** For Phv 340, for leaf longer than 1,80 m is required the use of the electro lock 8 pz. 270 Kg • Is recommended the use of an external aerial to improve radio reception • Strong wind and very low temperatures could reduce the performance of the actuator

16


UNDER V Underground swing gates automation 230 V - 24 V

Irreversible, leaf length up to 2,5 m

• Sturdy aluminum, die-casting structure • Steel and cast gears obtained from solid • Self-supporting operator, ideal for large gates • Kit levers 90° opening • Galvanized steel foundation box • Very quiet operation • High-performance electric motor • Mechanical release for emergency operation with lever supplied • Lithium grease lubrications of mechanical parts against corrosion, oxidation and rust • 90° opening * • (en 12453) Anti-squashing system • (en 12453) Slowing down*function • Optional kit battery backup • Power supply 230 v - 24 v *functions guaranteed with VDS electronics devices

Performance requirements Operating cycle Semi-intesive 230 Vac, Intensive 24 Vcc • Frequency of use 50% (230 Vac) 80% (24 Vcc)

• Opening time • Torque • Rotation pinion

Technical characteristics

Under V - 230 Vac

Under V - 24 Vcc

• Power supply

230 Vac

24 Vcc

• Leaf weight

500 Kg

500 Kg

• Leaf length

2,5 mt.

2,5 mt.

• Engine rpm

1400

1800

• Average absorption

1,4A

3A

• Absorbed power

280 W

50 W

• Condenser

12,5 uF

-

• Operator weight

15 Kg

15 Kg

• Noise level

< 30 dBA

< 30 dBA

• Environmental conditions

-20/+55° c

-20/+55° c

• Degree of protection

IP67

IP67

17

16 sec. 250 Nm 90°


Automations for swing gates

Cod.

Mod.

Features

121991/1

UNDER V - 230 V

Irreversible • leaf length up to 2.50 m • No foundation box

121991/24

UNDER V - 24 V

Irreversible • leaf length up to 2.50 m • No foundation box

121992/3

UNDER V - Cassa

Galvanized founfation box and levers

121993/1

UNDER V - Cassa

Stainless steel foundation box and levers

FC006

UNDER V - Fine corsa

Limit switches

121992/1

UNDER V - 180°

Kit 180° opening

PZ. PALLET 800x1200x1000 32 pz. 490 Kg

•Is recommended the use of an external aerial to improve radio reception •Strong wind and very low temperatures could reduce the performance of the actuator

KIT

Control unit with built-in receiver and aerial

Operators with brackets, condensers and limit switches

Cod. 23/1 Flashing light

Cod. 198/5 Key selector

Cod. TX02 Transmitter

Cod.

Mod.

121994/1

Kit Under V - 230 V

Swing gate kit for gates up to 5 m

121994/2

Kit Under V - 24 V

Swing gate kit for gates up to 5 m

Cod. 12/c Pair of photocells

Cod. 165B Warning board

Features

Accessori utili all’installazione Suggested accessories

Cod. 755 pag. 60 Horizontal leaf lock

PZ. PALLET 800x1200x1200 7 pz. 310 Kg

Cod. 121992/1 pag. 21 Kit 180° opening

Cod. 166 pag. 60 Electric lock

Cod. 244 (1 unit) pag. 63 Stand for photocell

• Is recommended the use of an external aerial to improve radio reception • Strong wind and very low temperatures could reduce the performance of the actuator

18


XNODO Articulated electromechanical swing gates automation 230 V - 24 V Irreversible, leaf length up to 2,5 m

• Sturdy aluminum, die-casting structure • Steel and cast gears obtained from solid • Aluminum articulated anti-shearing arm, powder coated • Very quiet operation • High-performance electric motor • Manual release with key • Lithium grease lubrications of mechanical parts against corrosion, oxidation and rust • Opening 120° • Suited for installation on large pillars • Only one version for right and left installations * (en 12453) Anti-squashing system and slowing down function • Optional kit battery backup • Power supply 230 v - 24 v *functions guaranteed with VDS electronics devices

Performance requirements • Operating cycle Semi-intesive 230 Vac, Intensive 24 Vcc • Frequency of use 50% (230 Vac) - 80% (24 Vcc) • Opening time 15 sec. • Thrust 250 Nm

Xnodo 230 Vac

Xnodo 24 Vcc

• Power supply

230 Vac

24 Vcc

• Leaf weight

200 Kg

200 Kg

• Leaf length

2,5 mt.

2,5 mt.

• Engine rpm

1400 rpm

1800 rpm

• Average absorption

1,2A

3A

• Absorbed power

200 W

50 W

• Condenser

12,5 uF

-

• Operator weight

9,5 Kg

9,5 Kg

• Noise level

< 30 dBA

< 30 dBA

• Environmental conditions

-20/+55 °c

-20/+55 °c

• Degree of protection

IP44

IP44

Technical characteristics

19


Automations for swing gates

Cod.

Mod.

Features

112562/2

XNODO - 230 V*

Irreversible • Stroke 400 mm • leaf length up to 2.50 m

112562/24

XNODO - 24 V*

Irreversible • Stroke 400 mm • leaf length up to 2.50 m

PZ. PALLET 800x1200x1000 24 pz. 250 Kg

* For Xnodo, for leaf longer than 2 m is suggested the use of the electro lock • Is recommended the use of an external aerial to improve radio reception • Strong wind and very low temperatures could reduce the performance of the actuator

KIT

2 Operators with brackets and condensers

Cod. 12/c Pair of photocells Control unit with built-in receiver and aerial

Cod. 23/1 Flashing light

Cod. 198/5 Key selector

Cod. TX02 Transmitter

Cod.

Mod.

Features

112563

Kit Xnodo - 230 V*

Swing gate kit for gates up to 5 m

112564/24

Kit Xnodo - 24 V*

Swing gate kit for gates up to 5 m

Cod. 165B Warning board

Suggested accessories

Cod. 755 pag. 60 Horizontal leaf lock

PZ. PALLET 800x12000x1200 10 pz. 270 Kg

Cod. 265 pag. 60 Vertical leaf lock

Cod. 166 pag. 60 Electric lock

Cod. 244 (1 unit) pag. 63 Stand for photocell

* For Xnodo, for leaf longer than 2 m is suggested the use of the electro lock • Is recommended the use of an external aerial to improve radio reception • Strong wind and very low temperatures could reduce the performance of the actuator

20


Sliding gates. PorČ&#x203A;i Culisante


SIMPLY Sliding gates operator 230 V - 24 V

Gates up to 600 kg

• Available fast version 220V/110V 20 m/min

• Structure in die-cast aluminum, powder painted • Steel and cast gears obtained from solid • Lithium grease lubrications of mechanical parts against corrosion, oxidation and rust • Very quiet operation • High-performance electric motor • Release device with customized key • Available with mechanical limit switches - magnetic limit switches - encoder • Electronic torque control • Pre-wired and easy programming software • Available with and without control unit • Control unit box with air-stop seal against moisture and insects * • *(en 12453) Anti-squashing system and slowing down function • Optional kit battery backup • Power supply 230 v - 24 v *functions guaranteed with VDS electronics devices

Performance requirements Operating cycle Semi-intesive 230 Vac, Intensive 24 Vcc • Frequency of use 50% (230 Vac) - 80% (24 Vcc) • Speed 10 mt./min. (230 Vac) - 12 mt./min. (24 Vcc)

Technical characteristics

Simply 230 Vac

Simply 24 Vcc

• Power supply

230 Vac

24 Vcc

• Leaf weight

600 Kg

350 Kg / 600 Kg with toroidal transformer

• Pinion

M4-Z12

M4-Z12

• Engine rpm

1400 rpm

2000 rpm

• Average absorption

1,3A

3A

• Absorbed power

250 W

50 W

• Condenser

12,5 uF

-

• Operator weight

8 Kg

8 Kg

• Noise level

< 30 dBA

< 30 dBA

• Environmental conditions

-20/+55° c

-20/+55° c

• Degree of protection

IP44

IP44

22


Automations for sliding gates

Cod.

Mod.

Features

100010

Simply 230 V*

Operator • without control unit

100010/1

Simply 230 V*

Operator • with control unit and built-in receiver 433 mhz

100011

Simply 24 V*

Operator • without control unit

100011/1

Simply 24 V*

Operator • with control unit and built-in receiver 433 mhz

140063

Simply CPT

Fixing plate

FC003

Simply FCM

Extra for magnetic limit switch

EN001

Simply ENCDR

Extra for encoder

PZ. PALLET 800x1200x1600 50 pz. 410 Kg

* The fixing plate is not included • Is recommended the use of an external aerial to improve radio reception • Very low temperatures could reduce the performance of the actuator

KIT

Operator with control unit and built-in receiver and aerial

Cod. 23/1 Flashing light

Cod. 198/5 Key selector

Cod.

Mod.

Features

100010/6

KIT SIMPLY 230 V

Kit for gates up to 600 kg

100010/7

KIT SIMPLY 24 V

Kit for gates up to 350 kg

FC003

SIMPLY FCM

Extra for magnetic limit switch

EN001

Cod. 140063 Fixing plate

Cod. 12/c Pair of photocells

Cod. TX02 Transmitter

Cod. 165B Warning board

Extra for encoder

Suggested accessories Cremagliera nylon Cod. 216/1 pag. 60 Nylon rack

pag. 60 Galvanized steel rack

Cod. 230/1 pag. 64 Mechanic safety edge

COD. 244 (1 unit) pag. 63 Stand for photocell

PZ. PALLET 800x1200x1300 32 pz. 480 Kg

• Is recommended the use of an external aerial to improve radio reception • Very low temperatures could reduce the performance of the actuator

23


CARRERA Sliding gates operator 230 V - 24 V

Gates up to 1000 kg

• Available fast version 220V/110V 20 m/min

• Structure in die-cast aluminum, powder painted • Steel and cast gears obtained from solid • Lithium grease lubrications of mechanical parts against corrosion, oxidation and rust • Very quiet operation • High-performance electric motor • Release device with customized key • Available with mechanical limit switches - magnetic limit switches - encoder • Electronic torque control • Pre-wired and easy programming software • Available with and without control unit • Control unit box with air-stop seal against moisture and insects * and slowing down function * • (en 12453) Anti-squashing system • Optional kit battery backup • Power supply 230 v - 24 v *ffunctions guaranteed with VDS electronics devices

Performance requirements • Operating cycle Semi-intesive 230 Vac, Intensive 24 Vcc • Frequency of use 50% (230 Vac) - 80% (24 Vcc) • Speed 10 mt./min. (230 Vac) - 12 mt./min. (24 Vcc)

Carrera 800 - 230 Vac

Carrera 800 - 24 Vcc

Carrera 1000 - 230 Vac

• Power supply

230 Vac

24 Vcc

230 Vac

• Leaf weight

800 Kg

800 Kg

1000 Kg

• Pinion

M4-Z16

M4-Z16

M4-Z16

• Engine rpm

1400 rpm

1800 rpm

1400 rpm

• Average absorption

2A

3A

2A

• Absorbed power

330 W

50 W

330 W

• Condenser

10 uF

-

12,5 uF

• Operator weight

9 Kg

9 Kg

9 Kg

• Noise level

< 30 dBA

< 30 dBA

< 30 dBA

• Environmental conditions

-20/+55° c

-20/+55° c

-20/+55° c

• Degree of protection

IP44

IP44

IP44

Technical characteristics

24


Automations for sliding gates

Cod.

Mod.

Features

100600

Carrera 800 - 230 V*

Operator • leaf up to 800 kg • without control unit

100601

Carrera 1000 - 230 V*

Operator • leaf up to 1000 kg • without control unit

100602

Carrera 800 - 230 V*

Operator • leaf up to 800 kg • with control unit and built-in receiver 433 mhz

100608/1

Carrera 800 - 24 V*

Operator • leaf up to 800 kg • with control unit and built-in receiver 433 mhz

100604

Carrera 1000 - 230 V*

Operator • leaf up to 1000 kg • with control unit and built-in receiver 433 mhz

100607

CPT

Fixing plate

FC004

Carrera FCM

Extra for magnetic limit switch

EN001

Carrera ENCDR

Extra for encoder

PZ. PALLET 800x1200x1600 40 pz. 370 Kg

* The fixing plate is not included • Is recommended the use of an external aerial to improve radio reception • Very low temperatures could reduce the performance of the actuator

KIT

Contropiastra Cod. 100607 Fixing plate

Operator with control unit and built-in receiver and aerial

Cod. 23/1 Flashing light

Cod. 198/5 Key selector

Cod.

Mod.

Features

100605

KIT CARRERA 800-230 V

Kit for gates up to 800 kg

100606/24

KIT CARRERA 800-24 V

Kit for gates up to 800 kg

100606

KIT CARRERA 1000-230 V Kit for gates up to 1000 kg

Tr Cod. TX02 Transmitter

Cod. 12/c Pair of photocells

Cod. 165B Warning board

Suggested accessories Cremagliera nylon Cod. 216/1 pag. 60 Nylon rack

Cod. 217 pag. 60 Galvanized steel rack

Cod. 230/1 pag. 64 Mechanic safety edge

COD. 244 (1 unità) pag. 63 Stand for photocell

PZ. PALLET 800x1200x1500 32 pz. 530 Kg

• Is recommended the use of an external aerial to improve radio reception • Very low temperatures could reduce the performance of the actuator

25


AG FUTURE Sliding gates operator 230 V - 380 V

Gates up to 1800 kg

• Available fast version 220V/110V 20 m/min

• Structure in die-cast aluminum, powder painted • Steel and cast gears obtained from solid • Stator and mechanical parts in oil bath- except 800 kg version, grease lubricated • Available with and without control unit • Control unit with built in radio receiver and aerial, control unit box with air-stop seal against moisture and insects • Pre-wired and easy programming software • High-performance electric motor • Available with mechanical limit switches or magnetic limit switches and encoder • Release device with customized key • Electronic torque control • Very quiet operation • * (en 12453) Anti-squashing system and slowing down function • The 1800 kg three-phase version comes with a control unit with soft start sot stop function • Power supply 230 v - 380 v

*functions guaranteed with VDS electronics devices

Performance requirements • Operating cycle • Frequency of use • Speed

Intesive 230 Vac, Intensive 380 Vac 80% (230 Vac) - 80%(380 Vac) 10 mt./min. (230 Vac) - 10 mt./min. (380 Vac)

Caratteristiche tecniche Technical characteristics

Ag F 800 Kg

Ag F 1000 Kg

Ag F 1600 Kg

Ag F 1600 Kg triphase

Ag F 1800 Kg triphase inverter

• Alimentazione motore Power supply

230 Vac

230 Vac

230 Vac

380 Vac

230 Vac

• Peso max anta Leaf weight

800 Kg

1000 Kg

1600 Kg

1600 Kg

1800 Kg

• Pignone Pinion

M4-Z16

M4-Z16

M4-Z16

M4-Z16

M4-Z16

• Giri motore Engine rpm

1400 rpm

1400 rpm

1400 rpm

1400 rpm

1400 rpm

• Assorbimento medio Average absorption

1,5A

1,7A

1,8A

1,5A

1,5A

• Potenza motore Absorbed power

280 W

330 W

360 W

500 W

500 W

• Condensatore Condenser

12,5 uF

16 uF

18 uF

-

-

• Peso operatore Operator weight

13 Kg

13 Kg

13 Kg

13 Kg

13 Kg

• Rumorosità Noise level

< 30 dBA

< 30 dBA

< 30 dBA

< 30 dBA

< 30 dBA

• Temperatura di esercizio Environmental conditions -20/+55° c

-20/+55° c

-20/+55° c

-20/+55° c

-20/+55° c

• Grado di protezione Degree of protection

IP44

IP44

IP44

IP44

26

IP44


Automations for sliding gates

Cod.

Mod.

11068

Ag F 800 kg**

11065

Ag F 1000 kg*

11066

Ag F 1600 kg*

Features

Operator • leaf up to 800 kg • without control unit Operator • leaf up to 1000 kg • without control unit Operator • leaf up to 1600 kg • without control unit

11067

Ag F 1600 kg triphase*

11068/1

Ag F 800 kg**

11065/1

Ag F 1000 kg*

11066/1

Ag F 1600 kg*

11069/1

Ag F 1800 kg triphase*

CPT02

CPT

Fixing plate

FC005

AG Future FCM

Extra for magnetic limit switch

Operator • leaf up to 1600 kg • without control unit Operator • leaf up to 800 kg • with control unit Operator • leaf up to 1000 kg • with control unit Operator • leaf up to 1600 kg • with control unit Operator • leaf up to 1800 kg • with inverter control unit • no rich

PZ. PALLET 800x1200x1600 * The fixing plate is not included 35 pz. 420 Kg ** The fixing plate is not included - lithium grease lubrication • Very low temperatures could reduce the performance of the actuator

KIT

Operator with control unit and built-in receiver and aerial

Cod. 23/1 Flashing light

Cod. CPT02 Fixing plate

Cod. 198/5 Key selector

Cod.

Mod.

11068/2

Kit Ag F 800* - 230 V

Kit for gates up to 800 kg

11065/2

Kit Ag F 1000 - 230 V

Kit for gates up to 1000 kg

11066/2

Kit Ag F 1600 - 230 V

Kit for gates up to 1600 kg

FC005

AG Future FCM

Extra for magnetic limit switch

Cod. TX02 Transmitter

Cod. 12/c Pair of photocells

Cod. 165B Warning board

Kit

Suggested accessories Cremagliera nylon Cod. 216/1 pag. 60 Nylon rack

Cod. 217 pag. 60 Galvanized steel rack

Cod. 230/1 pag. 64 Mechanic safety edge

COD. 244 (1 unit) pag. 63 Stand for photocell

PZ. PALLET 800x1200x1000 24 pz. 432 Kg

* Lithium grease lubrication • Is recommended the use of an external aerial to improve radio reception • Very low temperatures could reduce the performance of the actuator

27


TOM

Gates up to 4000/5000 kg

Sliding gates operator 230 - 400 Vac

• Structure in painted steel and stainless steel, cover in ABS • Steel and bronze gears obtained from solid • Air-cooled engine and reduction in bath of oil • Available with and without control unit • External control unit with watertight box • High-performance electric motor • Available with mechanical limit switches • Release device with hex wrench • Very quiet operation • Motor not provided with clutch, provide with safety equipment • Safety microswitch motor door • Three phase motor 230 - 400Y Vac

Performance requirements • Operating cycle • Frequency of use • Speed

Intesive 90% 8 mt./min.

Technical characteristics

Tom

• Power supply

230 - 400 Vac

• Leaf weight

4000 Kg - 380V three phase control unit 5000 Kg - 230V inverter control unit

• Pinion

Z20

• Engine rpm

1400 rpm

• Average absorption

2,5A

• Absorbed power

750 W

• Operator weight

40 Kg

• Noise level

< 30 dBA

• Environmental conditions

-25/+70° c

• Degree of protection

IP55

• Limit switch

Electromechanical

28


Automations for sliding gates

Cod.

Mod.

Features

11040

Tom 230 - 400Y

Operator • leaf up to 5000 kg • without control unit

Q100

Inverter

E107

Euro 380 m1

121110

CPT

Control unit 230/380 Vac • Inverter Control unit 230/380 Vac

PZ. PALLET 800x1200x70 6 pz. 300 Kg

Fixing plate

* The fixing plate is not included **The fixing plate is not included - lithium grease lubrication • Very low temperatures could reduce the performance of the actuator

KIT

Cod. 121110 Operator with control unit and built-in receiver and aerial

230/380 Vac Inverter Vac Inverter

Fixing plate

Control unit 230/380

230/380 Vac Control unit 230/380 Vac

Suggested accessories Cod. 216/1 pag. 60 Nylon rack

Cod. 217 pag. 60 Galvanized steel rack

Cod. 230/1 pag. 64 Mechanic safety edge

COD. 244 (1 unit) pag. 63 Stand for photocell

PZ. PALLET 800X1200x1500 30 pz. 490 Kg

* Lithium grease lubrication • Is recommended the use of an external aerial to improve radio reception • Very low temperatures could reduce the performance of the actuator

29


SLIM VULCAN Sliding gates operator 230 V - 24 V

Gates up to 250 kg

Motoriduttore 230 V - 24 V

• Operator 24 v with encoder / operatore 230 v without encoder • It works also without mechanical limit swichtes • Suitable for application inside pillars • High-performance electric motor • Very quiet operation • Control unit box with air-stop seal against moisture and insects • Easy programming software • Mechanical release with hex wrench • Electronic torque control • * (en 12453) Anti-squashing system and slowing down function • Optional kit battery backup • Power supply 230 v - 24 v

*functions guaranteed with VDS electronics devices

Performance requirements • Operating cycle Semi-intesive 230 Vac, Intensive 24 Vac • Emergency release with key • Speed 10 mt./min. (230 Vac) - 10 mt./min. (24Vcc)

Technical characteristics

Slim Vulcan 230 Vac Slim Vulcan 24 Vcc

• Power supply

230 Vac

24 Vcc

• Leaf weight

250 Kg

200 Kg

• Engine rpm

1400 rpm

1800 rpm encoder

• Average absorption

1A

3A

• Absorbed power

200 W

50 W

• Condenser

12,5 uF

-

• Operator weight

4,5 kg

4 kg

• Noise level

<30dBA

<30dBA

• Limit switch

Optional

Optional

• Degree of protection

IP44

IP44

30


Cod.

Mod.

Features

10009/P

SLIM 230 V

Operator • leaf up to 350 kg • fixing plate • without control unit

10081/ENC

SLIM 24 V

Operator • leaf up to 350 kg • fixing plate • encoder • without control unit

Fc001

FC MEC

Mechanical limit switches

FC002

FC MAG

Magnetic limit switches

PZ. PALLET 800x1200x1600 • Is recommended the use of an external aerial to improve radio reception 50 pz. 230 Kg • Very low temperatures could reduce the performance of the actuator

Examples of application

31


Road barriers. Bariere Automate


BERTA Electromechanical road barrier 230-24V

• • • • • • • • • • • • • • • •

Arms up to 6 m

Irreversible, intensive use Powder coated steel structure Engine housing in cast aluminum Steel and cast iron gears High performance electric motor Lithium grease lubrication of mechanical parts Microswitches in opening and closure Balance with spring Round arm standarD- rectangular arm optional Handle emergency release for 230 V - mechanical release with key for 24 V Max lenght arm 6 m - kit led optional Easy programming software Control unit with receiver and buil-in aerial * (en12453) Anti squashing system and slowing down function Electronic torque control Anti black-out battery kit * functions guaranteed with VDS electronics devices

Performance requirements • Operating cycle Semi-intesive 230 Vac, Intensive 24 Vcc • Frequency of use 50% (230 Vac) - 100% (24 Vcc) • Opening time 10 sec (Berta) - 5 sec (Berta Fast)

Technical characteristics

Berta 230 V

Berta 230 Fast

Berta 24 V

Berta 24 Fast

• Power supply

230 Vac

230 Vac

24 Vcc

24 Vcc

• Max lenght arm

6 mt

4 mt

6 mt

4 mt

• Opening time

10 sec

5 sec

10 sec

5 sec

• Absorbed power

250 W

250 W

60 W

60 W

• Operator weight

45 Kg

45 Kg

45 Kg

45 Kg

• Noise level

<30 dBA

<30 dBA

<30 dBA

<30 dBA

• Environmental conditions

-20/+55°

-20/+55°

-20/+55°

-20/+55°

• Degree of protection

IP44

IP44

IP44

IP44

33


Automations for road barrier

Cod.

Mod.

1445

Berta 230 V

1445/2

Berta 230 V - Fast

1446

Berta 24 V

1446/2

Berta 24 V - Fast

Features

Barrier • with control unit • arm from 3 to 6 m Barrier • with control unit • arm from 2 to 4 m Barrier • with control unit • arm from 3 to 6 m Barrier • with control unit • arm from 2 to 4 m PZ. PALLET 800x1200x1200 6 pz. 340 Kg • cod. 210/1 Is recommended the use of an external aerial to improve radio reception

Extra Accessories Kit LED • Racomanded 1 piece every mt of the arm LED flashing light circuit • Steady light - flashing - sequential/rotatory flashing

Cod. 242

Cod. 142 Mobile curtain

Cod. 121110

Fixed support

Cod. 110100 Rectangular arm support

Fixing plate

Cod. LD11 LED Flashing light

Cod. 12478 Round arm joint

Diame0eto mm 80 Diameter mm 80 Rectangular arm

Round arm

Kit Led

Cod. 140064 Reflective application

Cod. 124512 Reflective sticker

Cod.

Mod.

Features

121854

AT2

2 m round arm diam 80 mm

121854/1

AT3

3 m round arm diam 80 mm

121854/2

AT4

4 m round arm diam 80 mm

121854/3

AT5

5 m round arm diam 80 mm

121854/4

AT6

6 m round arm diam 80 mm

12478

GIU

Round arm joint

110100

RECT

Rectangular arm support

140026

AR4

4 m rectangular arm 100x30 mm

140026/4

AR6

6 m rectangular arm 100x30 mm

121110

CPT

Fixing plate

242

SUPP

Fixed support

141

AST

Arm mobile support

142

SIE

2 m mobile curtain

LD10

Kit LED - T

Cover • 3 led circuit • 20 cm cable • rect. arm

LD11

Kit LED - P

Cover • 3 led circuit • 20 cm cable • round arm

CL001

LD-CR

LED flashing light circuit

140064

CTR

Reflective application

124512

ACTR

Reflective sticker multi tension

K009

BAT-B

Kit battery backup

34


BEV 2 Electromechanical road barrier 230V - 24V

Arms up to 6 m

• Irreversible, intensive use • Stainless steel structure • Engine housing in cast aluminum • Steel and cast iron gears • High performance electric motor • Lithium grease lubrication of mechanical parts • Microswitches in opening and closure • Balance with spring • Predisposition for flashing light and photocells • Round arm standars- rectangular arm optional • Mechanical release with key • Max lenght arm 6 m- kit led optional • Easy programming software • Control unit with receiver and buil-in aerial • (en12453)* Anti squashing system and slowing down function • Electronic torque control • Anti black-out battery kit * functions guaranteed with VDS electronics devices

Performance requirements

Technical characteristics

• Operating cycle • Frequency of use

Semi-intesivo 230 Vac, Intensivo 24 Vcc 50% (230 Vac) - 100% (24 Vcc)

• Opening time

10 sec (Bev 2) - 5 sec (Bev 2 Fast)

Bev 2 230 V

Bev 2 Fast

Bev 2 24 V

Bev 2 24 Fast

• Power supply

230 Vac

230 Vac

24 Vcc

24 Vcc

• Max lenght arm

6 mt

4 mt

6 mt

4 mt

• Opening time

10 sec

5 sec

10 sec

5 sec

• Absorbed power

250 W

250 W

60 W

60 W

• Operator weight

50 Kg

50 Kg

50 Kg

50 Kg

• Noise level

<30 dBA

<30 dBA

<30 dBA

<30 dBA

• Environmental conditions

-20/+55°

-20/+55°

-20/+55°

-20/+55°

• Degree of protection

IP44

IP44

IP44

IP44

35


Automations for road barrier

Cod.

Mod.

1432/V

Bev 2 230 V

1432/2V

Bev 2 230 V - Fast

1428/V

Bev 2 24 V

1428/2V

Bev 2 24 V - Fast

Features

Barrier • with contrl unit • arm from 3 to 6 m Barrier • with contrl unit • arm from 2 to 4 m Barrier • with contrl unit • arm from 3 to 6 m Barrier • with contrl unit • arm from 2 to 4 m PZ. PALLET 800x1200x1200 6 Pz. 360 Kg • cod. 210/1 Is recommended the use of an external aerial to improve radio reception

Extra Accessories Kit LED • Racomanded 1 piece every mt of the arm LED flashing light circuit • Steady light - flashing - sequential/rotatory flashing

Cod. 242

Cod. 142 Mobile curtain

Cod. 121110

Fixed support

Cod. 110100 Rectangular arm support

Cod. LD11 LED Flashing light

Cod. 12478 Round arm joint

Diameter mm 80 Round arm

Diameter mm 80 Rectangular arm

Fixing plate

Kit Led

Cod. 140064 Reflective application

Cod. 124512 Reflective sticker

Cod.

Mod.

Features

121854

AT2

2 m round arm diam 80 mm

121854/1

AT3

3 m round arm diam 80 mm

121854/2

AT4

4 m round arm diam 80 mm

121854/3

AT5

5 m round arm diam 80 mm

121854/4

AT6

6 m round arm diam 80 mm

12478

GIU

Round arm joint

110100

RECT

Rectangular arm support

140026

AR4

4 m rectangular arm 100x30 mm

140026/4

AR6

6 m rectangular arm 100x30 mm

121110

CPT

Fixing plate

242

SUPP

Fixed support

141

AST

Arm mobile support

142

SIE

2 m mobile curtain

LD10

Kit LED - T

Cover • 3 led circuit • 20 cm cable • rect. arm

LD11

Kit LED - P

Cover • 3 led circuit • 20 cm cable • round arm

CL001

LD-CR

LED flashing light circuit

140064

CTR

Reflective application

124512

ACTR

Reflective sticker multi tension

K009

BAT-B

Kit battery backup

36


Shutters and Awnings Rulouri si Obloane


KINDI Automation for shutters

Weight up to 139 kg

KINDI 20

456 mm

55 mm

17 mm

KINDI 30

536 mm

55 mm

17 mm

KINDI 50

536 mm

55 mm

17 mm

KINDI 100

660 mm

70 mm

21 mm

• Operator in cast aluminum painted • New design • Mechanical limit switch • Fast reliable and quiet operation • Bracket and adapter 60/70 mm - standard • Wide range of adapters and accessories • Extra 5 years warranty • Power supply 230 Vac • Operator weight 3 kg

LINEA PROFESSIONAL

Cod. AM5196 Control Unit

38

Cod. AM5189 Transmitter


Cod.

Mod.

Description

12365

Kindi 20 Nm

Tubular motor • Until 36 kg • bracket and adapter 60 mm

12458

Kindi 30 Nm

Tubular motor • Until 56 kg • bracket and adapter 60 mm

125648

Kindi 50 Nm

Tubular motor • Until 90 kg • bracket and adapter 60 mm

125655

Kindi 100 Nm

Tubular motor • Until 139 kg • bracket and adapter minimum 70 mm

PZ. PALLET 800x1200x1000 80 pz. 320 Kg

Cod. PROFESSIONAL Mod.

Description

AM5196

RA1AM

Control unit • 230 Vac. • Radio receiver

AM5189

AM5189

Transmitter • 12 channels • Display

Cod. SUPERIOR

Mod.

Description

Q012

TRK

Control unit • 230 Vac. • Radio receiver

TX04

TR12

Transmitter • 12 channels

TX03

TR6

Transmitter • 6 channels

LINEA SUPERIOR

Cod. Q012 Control Unit

Cod. TX04 Transmitter

Cod. Tx03 Transmitter

39


KENDA Automation for awings

.

Weight up to 139 kg

• Operator in cast aluminum painted • New design • Mechanical limit switch • Fast reliable and quiet operation • Bracket and adapter 60/70 mm - standard • Wide range of adapters and accessories • Extra 5 years warranty • Power supply 230 Vac • Operator weight 3 kg

Cod. AM5196 Control Unit

40

Cod. AM5189 Transmitter


Cod. 74 Wind detector

Cod. RALight detector

Cod RS Rain detector

Cod.

Mod.

Descrizione

43000/90

Kenda 50 Nm

Tubular motor • with maneuver • awings until 90 kg

125656

Kenda 100 Nm

Tubular motor • with maneuveur • awings until 139 kg • adapter minimum 70 mm

Cod.

Mod.

Descrizione

76

Elios

Control unit • 30 Vac • radio receiver • for awings

RS

Pi-gi

Rain detector

RA

Lux

Light detector

74

Wind

Wind detector

AM5189

AM5189

Transmitter • 12 channels • display

PZ. PALLET 800x1200x1000 80 pz. 320 Kg

41


Adapters for tubulars motors

42

Cod.

Description

43380/156

Octagonal for tube of 60 mm

Cod.

Description

43380/061

Octagonal for tube of 70 mm

Cod.

Description

43380/064

Warhead for tube of 70 mm

Cod.

Description

43380/059

Warhead for tube of 78 mm

Cod.

Description

43380/063

Round unit for tube of 50 mm

Cod.

Description

43380/058

Gaviota

Cod.

Description

43380/060

ZF 54

Cod.

Description

43380/062

ZF 64

Cod.

Description

43380/065

Deprat 62


Fixing plates and supports

Cod.

Description

43380/057

Adjustable support

Cod.

Description

43380/068

Support with unlocking device

Cod.

Description

43380/109

Flat support with squared pivot

Cod.

Description

43380/110

Adjustable support

Cod.

Description

43380/111

Wall support

Cod.

Description

43380/102 43380/101

Casing plate 1 position Casing plate 2 positions

Cod.

Description

43380/081

Squared pivot

Cod.

Description

43380/086

Support kit + squared pivot

Cod.

Description

43380/116

Kit hexagonal eye 7 mm

43


Tubular motor guide for blinds

Weight

=

Nominal motor torque Uplift lever

The motor nominal couple in Nm (Newton per m.) is speciďŹ ed on the label ďŹ xed onto each motor. The uplift lever is obtained adding up the radius of the rolling tube (R1 in the picture aside) to the half the thickness of the blind shutter (R2 in the picture aside) or adding half length of the cord, which maintain the applied weight.

Example in meters 45 Nm

Nominal couple of the motor 45

Nm Diameter of the tube 60 mm - R1 = 30 mm ( 0,030 m) Thickness of blind shutter 10 mm - R2 = 5 mm (0,005 m)

9,81 N = 1kg

45 Nm

=

0,030 m + 0,005

=

=

0,035

PESO Weight

1285 Nm 9,81

1285 N

=

131 Kg

These guidelines allow to select the right motor according to the tube diameter and the weight of the shutter. The weight of the shutter in Kg is obtainable multiplying the surface by the weight per sqm of its material.

Attention The weights in the tabs are calculated with a tolerance of 50% (considering friction, increase of diameter during rolling up and so on. We advise to not over or under dimensioning the motor!

Rolling material

Weight per sqm

PVC

~ kg 5,0

wood

~ kg 10,0

Caulked aluminum

~ kg 4,0

Caulked steel

~ kg 10,0

Sicofer armoured steel

~ kg 16,0

Pulling adapters Rolling tube

End cups

Fixing supports

44


Tubular motor guide for curtains

Rolling tube diam 50 with round warhead

PROMINENCE IN METERS

ARM NUMBERS 1,5

2

2,5

3

4

5

2

20 Nm

30 Nm

30 Nm

30 Nm

30 Nm

50 Nm

4

30 Nm

30 Nm

30 Nm

30 Nm

50 Nm

-

6

30 Nm

30 Nm

50 Nm

50 Nm

-

-

8

50 Nm

50 Nm

-

-

-

-

1,5

2

2,5

3

4

2

20 Nm

30 Nm

30 Nm

30 Nm

50 Nm

50 Nm

4

30 Nm

30 Nm

30 Nm

50 Nm

50 Nm

100 Nm

6

30 Nm

50 Nm

50 Nm

50 Nm

100 Nm

100 Nm

8

50 Nm

50 Nm

100 Nm

100 Nm

-

-

Rolling tube diam 70 with round warhead PROMINENCE IN METERS

ARM NUMBERS

5

Rolling tube diam 78 with round warhead PROMINENCE IN METERS

ARM NUMBERS 1,5

2

2,5

3

4

5

2

20 Nm

30 Nm

30 Nm

50 Nm

50 Nm

100 Nm

4

30 Nm

50 Nm

50 Nm

50 Nm

50 Nm

100 Nm

6

50 Nm

50 Nm

50 Nm

100 Nm

100 Nm

-

8

100 Nm

100 Nm

100 Nm

100 Nm

-

-

45


Rolling shutters.


ROLL Operator for shutters

Weight up to 300 kg

• New design • Quick installation even on existing shutters • Reversible • Manual release • Electrobrake • Mechanical limit switch built-in, easy adjustable • Fast, reliable and silent • Power supply 230 V

ROLL 200 150 KG

60/48 mm

200/220 mm

320 mm

ROLL 200/2M 300 KG

60 mm

200/220 mm

320 mm

ROLL 240 170 KG

76 mm

240 mm

320 mm

ROLL 240/2M 300 KG

76 mm

240 mm

320 mm

Technical characteristics

Roll 200

Roll 240

Roll 200 - 2 M

Roll 240 - 2 M

• Power supply

230 Vac

230 Vac

230 Vac

230 Vac

• Lifting force

150 Kg

170 Kg

300 Kg

300 Kg

• Condenser

16 uF

20 uF

35 uF

40 uF

• Average absorption

2A

2,8A

2x2,8A

2x2,8A

• Absorbed power

400 W

600 W

2x600 W

2x600 W

• Engine rpm

9 / min

8 min

8 min

8 min

• Operator weight

8 Kg

9 Kg

11 Kg

13 Kg

• Environmental conditions

150° C

150° C

150° C

150° C

• Limit switch

7/8 mt

7/8 mt

7/8 mt

7/8 mt

48


Automation for rolling shutters

Cod.

Mod.

Description

1000043

ROLL 200

D. 60 Operator for roller shutter 150 k

100099/5

ROLL 240

100099/7

ROLL 200 - 2 M

100099/6

ROLL 240 - 2 M

1000043/1

ELT

PZ. PALLET 800x1200x1300 50 pz. 520 Kg

Operator for roller shutter 150 kg Double operator for roller shutter with electrobrake 300 Kg Double operator for roller shutter with electrobrake 300 Kg Elektrobrake with release cable

• Is recommended the use of an external aerial to improve radio reception • Strong wind and very low temperatures could reduce the performance of the actuator

KIT

Cod. 854/1 Control unit with built in receiver and aerial

1 Operator with adapter

Cod. 12/c Pair of photocells

Cod. 23/1 Flashing light

Cod.

Mod.

Description

10043/2

Kit Roll 200

Rolling shutter kit until 150 kg

PZ. PALLET 800X1200x1350 50 pz. 500 Kg

Elektrobrake with release cable

Cod. E010 Transmitter

Metallic selector with unlocking

Cod. 165B Warning board

• Is recommended the use of an external aerial to improve radio reception • Strong wind and very low temperatures could reduce the performance of the actuator

48


Bollards Stalp retractabil automat Bollard


MOLE Electromechanical bollard 230V

Performance requirements • Operating Cycle Semi-intensive • Frequency of use 50% 7 sec. • Opening time

Technical characteristics

Mole

• Power supply

230 Vac

• Average absorption

1A

• Absorbed power

250 W

• Lifting force

150 Kg

• Engine rpm

1400 rpm

• Foundation pipe weight

35 kg

• Condenser

8 uF

• Inside pipe weight

45 kg

• Enviromental conditions

-20°/+55° C

• Led power supply

24 Vac

• Degree of protection

IP66

• Bollard rod stroke

450 mm

50


Electromechanical bollards

• Inner pillar in 4 mm thick stainless steel • Outer pillar (foundation case) in galvanized steel • The automation does not need any adjustment and calibration, to ensure immediate installation for proper operation • The movement of the pillar ends automatically with the increase of the absorption of electric motor • The manual release occurs on top of the bollard with triangular key • The 360 visible LED luminous flux ,both with inner pillar, lowered or raised, and the retro-reflectiv film ensures the perfect visibility of the bollard • The fluidity of the movement of the bollard is provided by an electromechanical system with epicyclic reduction in an aluminum tin • The control unit manages the movement providing maximum security and performance over time

Cod.

Mod.

Description

20009

MOLE

Electromechanical bollard • with control unit

PZ. PALLET 800X1200x1000 + 6 COLLI 360x300x1550 30 pz. 400 Kg • Is recommended the use of an external aerial to improve radio reception

51


Accessories.


Accessories

53

Cod.

Mod.

Description

166

ELT2

Complete electro lock horizontal/vertical

Cod.

Mod.

Description

167

ELT

Complete elettro lock left/right

168/1

ELT-base

Fixing plate

Cod.

Mod.

Description

A731

ELT

Complete elettro lock left/right • with push button

A732

ELT

Complete elettro lock left/right • without button

Cod.

Mod.

Description

265

BL1

Vertical leaf lock

Cod.

Mod.

Description

755

BL2

Blocco anta orizzontale Horizontal leaf lock

Cod.

Mod.

Description

216/1

CRM2

Pz. 1 mt Nylon rack • M4 • 1 m with steel bar complete with fittings


Accessories

Cod.

Mod.

217

CRZ

Description Steel rack galvanized M4 • 1 m • 30x 12 with spacers

Cod.

Mod.

198/2

PLA

Description External wall selector • start/stop • aluminum

Cod.

Mod.

198/5

PLA-ABS

Description External wall selector • start/stop • ABS

Cod.

Mod.

Description

754/2

BASE

Fixing base for BLINDOR • ABS

754/1

BLINDOR

•Wall selector with electrobrake • unlocking device • pushbutton • aluminum

754/6

BLINDOR1

Wall selector with electrobrake • unlocking device • aluminum

Cod.

Mod.

Description

854

MAYA

• Wall selector with electrobrake • unlocking device • pushbutton • aluminum

854/1

MAYA1

Wall selector with electrobrake • unlocking device • aluminum

With universal lock

Description

Cod.

Mod.

200

INK

Wall selctor •ABS

STP013

INK -R

Round adaptor

54


Accessories

Cod.

Mod.

EASY-F KEYPAD

Description • Numeric keypad with cable • anti-vandalic • waterproof • backlit

Cod.

Mod.

EASY NEW KEYPAD

Cod.

Mod.

SPROX TAG 1

55

Description Numeric keypad with cable • backlit

Description Proximity reader

SKEY

TAG 2

TAG 1 Proximity card

E001

SMR24C4

External receiver for TAG

Cod.

Mod.

Description

1434

GSM

GSM module for gates opening

Cod.

Mod.

Description

1434/A

GSM-C

GSM module for gates opening • 1 channel


Accessories

Cod.

Mod.

Description

12/T

FS

Wall photocells for tight space • 50 mt. range

Cod.

Mod.

Description

12/C

TECH2

Wall photocells

Cod.

Mod.

Description

18

FT INC

Enbedded photocells

Cod.

Mod.

Description

FT25B

FT BAT

Photocells with included battery

BATF

BATTERY

Spare part kit battery

Cod.

Mod.

Description

RP25

FTCS

Mirror photocell

Cod.

Mod.

Description

244

CLA 50

Aluminum stand for photocells • h 50

248

CLA 100

Aluminum stand for photocells • h 100

124569

CLA C

Fixing plate

56


Accessories

57

Cod.

Mod.

Description

273

CLA 15

Aluminum stand for photocells • h 15

Cod.

Mod.

Description

272

CSELL

Aluminum stand with key selector • h 100

272/1

CSELL F

Aluminum stand with key selector • h 100 • Photocell predisposition

124569

CLA C

Fixing plate

Cod.

Mod.

Description

23/1

Wave

Flashing light with fix light 230 Vac • yellow or transparent cover

23/2

Wave 12

Flashing light with fix light 12 Vcc • yellow or transparent cover

23/8

Wave LED

LED flashing light • different type of flashing • in yellow cover

23/4

Base Wave

Base for wall fixing

Cod.

Mod.

Description

Z23

WHITE

Flashing light with fix light 230 Vac • wall fixing

Z24

WHITE

Flashing light with fix light 12 Vcc • wall fixing

Z25

BLACK

Flashing light with fix light 230 Vac • wall fixing

Z26

BLACK

Flashing light with fix light 12 Vcc • wall fixing

Cod.

Mod.

Description

210/1

ANT

Aerial with 4,50 m cable and fixing plate • 433 Mhz

Cod.

Mod.

Description

230/1

CM2

Complete mechanic safety edge 2 m • h 75 mm

230/3

CM2/2

Complete mechanic safety edge 1,7 m • h 75 mm


Accessories

Cod.

Mod.

Description

233

CMBP25

Low section mechanic safety edge • 2,50 h 25 mm

234

CMBP30

Low section mechanic safety edge • 30 h 25 mm

235

CMBP35

Low section mechanic safety edge • 3,50 h 25 mm

236

CMBP40

Low section mechanic safety edge • 4 h 25 mm

Cod.

Description

420/2

12 Vcc battery • 1,2 Ah

• for SIMPLY/CARRERA/SPEED

Cod.

Description

420

12 Vcc battery • 7 Ah

• for SIMPLY/CARRERA/SPEED

Cod.

Description

420/1

12 Vcc battery • 2 Ah • universal

Cod.

Description

23

12 Vcc • battery for trasnmitter E010

Cod.

Description

24

Lithium battery CR 2032 3 Vcc • for TX01/TX02 Transmitter

58


Control Units


Control units

Swing gates Cod.

Mod.

E105

EURO 230 m2

• Control unit 230 Vac • In box • Swing gates 1 or 2 leafs • Self-learning radio receiver • Rolling-code and fix code to be selected by switch • Electrical limit switches • Slowing down function/pedestrian input

Cod.

Mod.

E112

EURO 230 m2 mini

• Control unit 230 Vac • In box • Swing gates 1 or 2 leafs • Self-learning radio receiver • Rolling-code and fix code to be selected by switch • Slowing down function/pedestrian input

Cod.

Mod.

E106

EURO 24 m2

E060

charge battery

• Control unit 24 Vcc • In box • Swing gates 1 or 2 leafs • Self-learning radio receiver • Rolling-code and fix code to be selected by switch • Slowing down function/pedestrian input

Cod.

Mod.

Q100

Inverter

• Control unit 230/380 Vac inverter • In box • Sliding gates • Trimmer speed and strength setting • Management amperometric sensitivity • Deadman

60


Control units

SCORREVOLI - BARRIERA - BASCULANTE Sliding gates, road barriers, counterweight doors Cod.

Mod.

E102

EURO 230 m1

• Control unit 230 Vac • Sliding gates, road barriers and counterweight doors • Self-learning radio receiver • Rolling-code and fix code to be selected by switch • Slowing down function/pedestrian input

Cod.

Mod.

E103

EURO 24 m1

• Control unit 24 Vcc • Sliding gates, road barriers and counterweight doors • Self-learning radio receiver • Rolling-code and fix code to be selected by switch • Slowing down function/pedestrian input

Cod.

Mod.

E107

EURO 380 m1

• Control unit 230/380 Vac • In box • Sliding gates, road barriers and counterweight doors • Self-learning radio receiver • Rolling-code and fix code to be selected by a switch

Cod

Mod.

F103

ELB 24 m2

• Control unit 24 Vcc • In box • Swing gates 1 or 2 leafs • Self-learning radio receiver • Rolling-code and fix code to be selected • Slowing down function/pedestrian inpu

61


Control units

Rolling shutter Cod.

Mod.

Q010

FORZA 5

• Control unit 230 Vac • In box • Rolling shutters • Self-learning radio receiver • Rolling-code and fix code to be selected • Flashing lamp, courtesy light

Cod.

Mod.

E100

EURO SR 1

• Control unit 230 Vac • In box • Rolling shutters • Self-learning radio receiver • Rolling-code and fix code to be selected by a switch • Electrical limit switches • Flashing lamp, courtesy light

Sectional doors and counterweight doors Cod.

Mod.

G030

AT 7070

• Control unit 24 Vcc • Sectional doors and counterweight doors • Self-learning radio receiver • Rolling-code and fix code to be selected • LED lighting

Transformers

62

Cod.

Description

478/1

Laminated transformer 100 Va • 12/24/230 • for UTILE 70/SIMPLY

480

Toroidal transformer 100 Va • 24 Vcc • for BEV2/BERTA/CARRERA

478/P

Toroidal tranformer 140 Va. 24 Vdc • for UTILE 100


Control units

Radio receiver Cod.

Mod.

Description

1000/1

EHT

Plug-in radio receiver 433 Mhz • super heterodyne • universal

1000

SCH

Plug-in radio receiver 433 Mhz • protected from interferences • universal

Cod.

Mod.

Description

E002

SMR24c2

external radio receiver in box 433 Mhz • 2 channels • 12/24 Vcc • rolling code with aerial

E003

SMR220c2

external radio receiver in box 433,Mhz • 2 channels • 230 Vac • rolling code with aerial

Cod.

Mod.

Description

E001

SMR24c4

external radio receiver in box 433 Mhz • 4 channels • 12/24 Vcc • rolling code with aerial

Cod.

Mod.

Description

E142

SRM

External radio receiver 433 Mhz. • 1 channel • Without box

Loop detector Cod.

Cod.

Mod.

QDM1

SPIRA 230 V

SMR-24

SPIRA 24 V

Loop detector 230 Vac • 2 channels • box Loop detector 24 Vcc • 2 channels • box

Cod.

Mod.

264

WIRE 2

Twisted cable to embeded underground 3x3 m + 15 m cable

83 63 55


Control units

64

Cod.

Mod.

Description

TX01

MULTI2

2 channels transmitter • self-learning • 433,92 Mhz •

Cod.

Mod.

Description

TX02

MULTI4

4 channels transmitter • Self-learning • 433,92 Mhz • copyable • rolling code • fix code

Cod.

Mod.

Description

E010

ECO-R

5 channels transmitter • self learning • 433,92 • rolling code

Cod.

Mod.

Description

E204

PRO/TXR

Portable programmer for transmitter ECO-R

Cod.

Mod.

Description

164/1

FRQ

Frequency counter

Cod.

Mod.

Description

E204/D

PRO/CLO

Programmer and cloner for transmitter ECO-R


Sliding Doors Automations UČ&#x2122;i Glisante Automate


SPEED

Cod.

Sliding Door Automation

Coverall 1 leaf with maximum weight of 120 Kg Coverall lenght ( mm)

Net passage width (mm)

Leaf lenght (mm)

602/1370

1370

600

700

602/1570

1570

700

800

602/1770

1770

800

900

602/1970

1970

900

1000

602/2370

2370

1100

1200

602/2770

2770

1300

1400

602/3170

3170

1500

1600

602/3570

3570

1700

1800

602/3970

3970

1900

2000

602/4370

4370

2100

2200

602/4770

4770

2300

2400

602/5170

5170

2500

2600

602/5570

5570

2700

2800

602/5970

5970

2900

3000

66


Sliding Door Automation

Lead Profil

Sliding doors automation SPEED • Reversible 1 motor automation for sliding doors • Suitable for offices, supermarkets and shops • Rapid and silent movements • Easy and rapid installation Cod.

Coverall 2 leaves with maximum weight of 80 + 80 Kg Coverall lenght ( mm)

Net passage width (mm)

Leaf lenght (mm)

603/1720

1720

800

2 x 450

603/1920

1920

900

2 x 500

603/2320

2320

1100

2 x 600

603/2720

2720

1300

2 x 700

603/3120

3120

1500

2 x 800

603/3520

3520

1700

2 x 900

603/3920

3920

1900

2 x 1000

603/4320

4320

2100

2 x 1100

603/4720

4720

2300

2 x 1200

603/5120

5120

2500

2 x 1300

603/5520

5520

2700

2 x 1400

603/5920

5920

2900

2 x 1500

67


Accessories for installation/control/safety

68

Cod.

Mod.

Description

604

SEL

Digital multifunction selector

Cod.

Mod.

Description

607

SEL

Rotative multifunction selector

Cod.

Mod.

Description

12/TS

TOUCH

Touch switch

Cod.

Mod.

Description

100074/21

HR50

Omni directional microwave sensor

Cod.

Mod.

Description

100074/22

HR100

Microwave double technology sensor

Cod.

Mod.

Description

100074/16

ACTIR

Active infrared sensor


Accessories for installation/control/safety

Cod.

Mod.

Description

FOTO9S1A FOTO9S1A

Amplifer (1 ray) photocells

Cod.

Mod.

Description

FOTO9S2A

FOTO9S2A

Amplifier (2 rays) photocells

Cod.

Mod.

Description

CR10MS

CR10MS

Couple of photocells

Cod.

Mod.

Description

608

SUP

Support profile for glass leaves (prime per m)

Cod.

Mod.

Description

100074/11

GUI

Floor guide for glass leaf

Description 611

Partial downing system 1 leaf

612

Partial downing system 2 leaves

613

Battery anti-panic system

614

Complete mechanic electro lock with manual emergency system

615

Electronic key for remote entrance

100074/9

Floor guide

605

Base profile (m)

606

Cover profile (m)

616

Couple lateral plugs for base and cover profiles

69


TECHNICAL FEATURES

DIGITAL KEYBOARD 604 • 6 command keys. Programs available: • Entrance • Exit • Normal • Partial • Open • Close Hidden reset button and total block with tublar key LED control functions

ROTATORY SELECTOR 607 • 6 positions knob Programs available: • Entrance • Exit • Normal • Partial • Open • Close LED control functions

CARTS • Made of sturdy laminated steel with laser cut • Wheel bearing in polyamide molded directly on the bearing • Anti-slip system with adjustable metal elements

POWER SUPPLY UNIT • Fuse protected toroidal transformer, mounted directly on the support bracket of the motor unit

OPERATOR UNIT • Motor 24 Vcc, drive shaft supported by ball bearing • Optical encoder with double reading • Die-cast aluminum wheel drive • Locking system built by an industrial solenoid mounted directly on the return wheel operable by steel cable

CONTROL UNIT ELB01 • Micriprocessor with buil-in charger managemet and extractable terminals • Remote programming via Bluetooth • Anti-squashing safety • Slowdown speed regulation directly on the board or via Bluetooth

70


SC Analko Aluminium Ind. SRL Sediul

: Prel. Sos. Giurgiului nr. 33 A

Judetul : Ilfov 077120 TEL : 021 493 05 03 / fax 021493 05 02 Website:

www.analkodoors.ro

E-mail:

oďŹ&#x192;ce@analkoaluminium.ro

Support Technic: suport@analkoaluminium.ro

Profile for Analko Aluminium Industry

Automatizari - Analko  

Analko Aluminium Industry vă oferă o gamă variată de automatizări pentru porți batante, porți glisante, bariere, uși glisante și uși de gara...

Automatizari - Analko  

Analko Aluminium Industry vă oferă o gamă variată de automatizări pentru porți batante, porți glisante, bariere, uși glisante și uși de gara...

Profile for analko
Advertisement