Issuu on Google+

Field Removal And Re-Installation Of Conversion Tops 3. Installation of Velcro® Onto Conversation Top a.

4. Installation of Conversion Top Onto New Cart

Clean underside surface of conversion top where Velcro ®strips were removed using rubbing alcohol. Allow alcohol to evaporate. 7/8” ± 1/4”

a.

Peel off backing to expose Velcro® strip adhesive.

b.

Turn over conversion top and install onto new cart deck by tilting the top so the back side (with the rectangular label) is angled down and positioned against the rear cart’s surface). Rotate the top forward and down until it is resting on the cart deck.

c.

Press and hold the cart top in place for 15 seconds. Allow to set 1 hr. before using. Velcro® will bond to cart deck over time and be fully set in 24 hrs.

1 3/4” ± 1/4”

2” ± 1/2” 10”

b.

Peel off backing to expose adhesive on Velcro® strips (4) and place onto underside of conversion top.

Push

Note: Velcro® placement dimensions from Step 3a.

c.

Press each strip in place minimizing wrinkles. Allow to set 1 hr. before using. Velcro® will bond to conversion top over time and be fully set in 24 hrs. Lit # 0076 SM

SecurityPoint Media

www.securitypointmedia.com

IS-C010156


SecurityPoint Media Conversion Tops Instruction Sheet