Page 1

INTRODUCTION Al Wadi Contracting & Steel Works is one of the leading steel fabrication factories v Qatar. It has been serving the country’s construction sector since the year 1971. Capitalizing on its accumulated experience of the Qatari market, the company has grown from a small work-shop to a 12,000 sq. m. factory. Al Wadi Contracting & Steel Works Company is now involved in designing, manufacturing and erecting steel section in many of the prestigious projects being built all over the country. From concept improvement, design, detailing, fabrication and erection, Al Wadi From concept improvement, design, detailing, fabrication and erection, Al Wadi Steel is proud to provide comprehensive manufacturing and erecting services to a wide range of construction projects. As steel structures are increasingly gracing the skylines of countries all over the world, Al Wadi Steel is working to ensure timely supply of the best service in structural steel buildings to its clients in Qatar.

1


VISION Al Wadi has achieved a respected position in the market place by meeting customer needs and exceeding expectations. With the addition of the hot roll service machines and designing software,we are aspiring to further enhance our reputation as the company of choice for quality structural steel buildings, providing full service in structural steel engineering under one roof.

2


3


VALUES We work hard to earn clients’ trust and respect on every project we undertake, according to our core values of: Honesty - Integrity - Respect

MISSION With deep industry expertise, and proven experience in steel works, Al Wadi Contracting & Steel Works Company promises to supply structural steel building according to the customer’s requirements within the set time and budget.

4


5


CAPABILITIES:

SOFTWARE: Al Wadi invests heavily in software. The software allows us to see the structure in 3D mode before fabrication. Thus we can see any potential problems and amend the design accordingly to avoid errors after production. We use StruCad program. StruCad is the world’s leading 3D Structure steel detailing system. It puts a unique array of powerful modeling and detailing tools into the hand of drafting professionals providing the most productive solution for stellworks detailer. It provides shop drawings for fabrication, production drawings, erection drawings and presentation drawings. It allows optimizing of segments and cost savings for the benefit of clint. We also have master series program which is one of the best in the UK. Master series is single, modular, fully integrated structural design software. It can optimize segments and can also make composite sections between steel and concrete. The results in cost reduction for clients due to the reduction of steel amount used in the project. Another pioneer software we have is the cold-formed steel design software (CFS). CFS is a comprehensive general-purpose cold-formed steel component design tool that performs calculations according to the AISI 2007 edition of the North American specification for design of Cold-Formed steel structural mrmbers.

6

Al-Wadi Contracting & Steel has the capacity to carry out designs, fabrications and erections of structural steel work The company will guarantee you afirst-class quality service as well as the highest level of safety & timing.


7


PEOPLE: Al Wadi Steel has a strong engineering department that can provide most of the project design and detailing information we need. We provide design, fabrication and erection under one roof. We have trained staff to work on professional design and detailing programs contributing to accuracy, saving time and resulting in cost saving for the client. Al Wadi steel structures has 200 employees including 5 engineers and 4 autocad oprators, We have 5 erection teams each including 8 people. All of our workers have a long experience in steel works and in working on high rise buildings with the company doing work on 35th floor.

8


9


FACTORY: Our factory extends over a total area of 12,000 sq. m. of which 4,000 sq. m. are covered. Our production capacity is 600 tons per month. We have a wide range of machinery to help us to complete our works in shorter time with more accuracy in fabrication. We have four ranges of machinery for hot roll steel structural services. We have CNC saw and drilling line for cutting and drilling all kinds of sections. At the same time we have CNC Plasma Cutting plots machine and all kind of bending, drilling and rolling machines. We have 6M long and 16mm thickness olate cutting machine as well.

10


11


Schools

12

1

ISOMETRIC VIEW

---

SCALE 1 : 125


Schools

13


PEARL QATAR 14


B7 B 13 VB 2

A 13

A 12

VB 6 VB 7

VB 24 VB 21 VB 20

VB 9 VB 11 VB 18 VB 17

FIRE STATION

15


DOMES @ PERL

16


DOOMS@ PERL QATAR

BIG DOME

17


ROOF @ PERL

18 1 ---

3D VIEW

SCALE NTS


ROOF @ PERL QATAR

19


ABM MILITARY CAMP + SWIMMING POOL PROJECT

20


MILITARY PROJECTS

21


AL BROOQ TOWER

22


WALDROF ASTORIA HOTEL

23


AL BAKER TOWER

24


25


W HOTEL

26


YOHAN TOWER

27


FALCON TOWER

28


29


QATAR UNIVERSITY

30


QATAR UNIVERSITY

1 ---

ISOMETRIC VIEW SCALE, 1:75

31


ALNASR SHOWROOM

32


VENDOME MALL

33


ARAB CENTER

34


35


ARAB CENTER

36


QATAR NAVIGATION

37


38

WARE HOUSES


WARE HOUSES

39


WARE HOUSES 40


WARE HOUSES

41


STEEL FABRICATION 42


STEEL FABRICATION 43


Profile for alwadi

ALWADI NEW CATALOG  

New Brochure ,

ALWADI NEW CATALOG  

New Brochure ,

Profile for alwadi3