Page 1

Product Datasheet Hydrotech MM6125

Sheet No:

PD201FR

Issued:

May 2012

Pages:

1 of 2

Description Hydrotech Monolithic Membrane 6125 is hot applied rubberized bitumen, black in colour. Use For use as a roofing and waterproofing membrane on typically concrete structures, in horizontal and vertical applications such as roof decks, parking decks, podiums, foundation walls, tunnels and planters. It can also be applied to metals which are grease and oil free, and to WBP plywood. All substrates must be dust, debris and laitance free. Approvals British Board of Agrément Certificate No’s 90/2431 and 90/2432. European Technical Approval ETA-05/0152. Application  Cut excess wrapping from block, with a sharp knife or scissors.  Heat in purpose made oil or air jacketed melter in accordance with operating instructions and Hydrotech QA manual.  Apply product to suitably prepared substrate by squeegee, in two layers of total (nominal) thickness of 6mm (not including protection sheet), reinforced with Flex-Flash F (or Flex-Flash UN, where appropriate).  Apply Hydrogard protection sheet immediately into second coat of membrane, with 75mm overlaps sealed with Hydrotech (except Hydrogard 40 which has torch-sealed laps which must be kept free of Hydrotech).  Clean residue from squeegee blade immediately after use with white spirit.  Check thickness of finished application with depth gauge, and seal pinhole after removal of gauge by applying direct pressure. Coverage Approximately 6.5kg/m2 depending upon substrate. Fire Rating F.AA to BS476 pt 3:2004 – External fire exposure to roofs, when used as a ballasted or paved system. Storage Store upright in a clean, dry location, away from heat sources. Product Data Packaging Storage

Polyethylene wrapped 22.6kg cakes individually packed in 250 x 200 x 460mm cardboard boxes. Store in a well ventilated area, away from heat sources.

Flash Point

260°C

Shelf-life

10 years

Density

1.25kg/litre

Solids content

100%

Curing time

Immediate

ALUMASC EXTERIOR BUILDING PRODUCTS LTD Tel: +44 (0)1744 648400

Fax: +44 (0)1744 648401

Email: waterproofing@alumasc-exteriors.co.uk www.alumascwaterproofing.co.uk


Product Datasheet Hydrotech MM6125

Sheet No:

PD201FR

Issued:

May 2012

Pages:

2 of 2

Health & Safety Material Safety Data Sheets are available upon request, and can also be downloaded directly from www.alumascwaterproofing.co.uk Technical Support Technical advice is available from Alumasc Technical Services at: Telephone: Facsimile: Email:

+44 (0)1744 648400 +44 (0)1744 648401 waterproofing@alumasc-exteriors.co.uk

The company pursues a policy of constant product development and information contained in this publication is therefore subject to change without notice. The customer is responsible for ensuring that each product is fit for its intended purpose and that the conditions for use are suitable. All quoted data is nominal and subject to production tolerances.

ALUMASC EXTERIOR BUILDING PRODUCTS LTD Tel: +44 (0)1744 648400

Fax: +44 (0)1744 648401

Email: waterproofing@alumasc-exteriors.co.uk www.alumascwaterproofing.co.uk

pd201fr-hydrotech_mm6125  

http://www.alumascwaterproofing.co.uk/media/18329/pd201fr-hydrotech_mm6125.pdf