Page 1


Our well intervention business is founded on the principles of quality, and on the reliability of our people, technology and services. Qinterra Technologies has had a continuous development programme for tractor and tractor applications since 1999.

Qinterra Technologies Š2014 Qinterra Technologies All rights reserved qinterra.com Rev. 2 - October 2014 3D-illustrations: Adsign Design: Ghost Printing: Spesialtrykk AS


QINTERRA AS

QINTERRA TECHNOLOGIES

ALTUS INTERVENTION

In January 2014 Aker Solutions Well

Qinterra Technologies is a specialist

ALTUS Intervention are well

Intervention Services business was

intervention technology company

intervention specialists in the North

acquired by EQT, a Swedish private

operating globally. We solve

Sea. We offer wireline, wireline

equity fund.

customers’ intervention challenges by

tractor, coiled tubing and pumping

offering combinations of innovative

and logging services in Norway,

The business was subsequently

and field-proven well intervention

Denmark and the UK. Our UK

rebranded to Qinterra AS,

technologies and tools.
Our adaptive

operation also offers pipeline and

comprising the North Sea well

technology is low impact, efficient

process services.

intervention services business ALTUS

and fit for purpose, focussed on

Intervention and the international

enhancing production and achieving

We pride ourselves on our depth of

well intervention technology business

better results with less risk, time and

experience and knowledge, setting

Qinterra Technologies.

money.


high standards in safety, quality and everything we do.

Our strategy is simple: to be the

We currently employ around 300

benchmark for well intervention.

people and have operations in

ALTUS Intervention currently employs

We do this by being focussed on

Norway, UK, Canada, USA,

over 1,400 people in Scandinavia

combining the right people with the

Middle East, Russia, Azerbaijan

and the UK.

right services and technologies.

and Malaysia. In the North Sea, we operate as technology supplier to our

We have a long track record of

sister division ALTUS Intervention.

delivering enhanced well production and efficient solutions to our customers. Our knowledge and experience defines us and is built around three core principles: Safety, Quality & Reliability.

3


HEALTH, SAFETY AND ENVIRONMENT

ENHANCED WELL PERFORMANCE

OPERATIONAL EFFICIENCY

Our upbringing in the harsh

Our customers are challenged by

Our well intervention services

conditions of the North Sea has

depleting reserves, less accessible

business is founded on the principles

taught us the value of respect and

reservoirs and increasingly complex

of quality, and on the reliability of

concern for health, safety and the

reservoir characteristics.

our people, technology and services.

Our role, as a well service provider,

As we demonstrate on the following

Health, safety and the environment

is to help our customers solve these

pages, we take pride in taking

(HSE) is a core value in Qinterra

challenges. We have been doing so

responsibility for the job and

Technologies. We take personal

for more than 30 years.

maintaining the integrity of your well.

environment.

responsibility for HSE because we

We develop and provide ingenious

care about people, the environment

In Qinterra Technologies we combine

solutions to improve operational

and our company. This is the attitude

technologies, products, services

efficiency and reduce non-productive

at the heart of our culture.

and know how to evaluate, plan,

time. Through cross training of

design and execute well intervention

personnel we reduce the amount of

solutions across the life of the field.

people it takes to perform a job.

Particular types of activities account for many of the serious incidents in our industry. To directly target those

We understand the challenges of

incidents, we have introduced a

your well. We apply the knowledge

series of specific safety measures.

and experience we have developed

The purpose of these rules is to

over 30 years in the well service

prevent injuries and save lives.

business. We utilise our broad well technologies and asset portfolio

4

We perform interventions in a large

to provide you with an efficient

variety of wells all over the world,

intervention solution. Our aim is

but our HSE mindset always remains

always to maximise production of

the same: every incident can be

hydrocarbons whilst maintaining well

prevented.

integrity safely and responsibly.


CONTENTS

WIRELINE TRACTOR SERVICE

6

STROKER SERVICES

31

Horizontal wells 8

PowerTrac Stroker 32

Why wireline tractor?

9

Hydraulic Shifting Tool

33

PowerTrac Advance 218

10

PowerTrac Stroker Shifting Tool

34

PowerTrac Advance 318

11

Improved Kick-over Tool

35

PowerTrac Advance 434 / 434XR

12

PowerTrac Impactor 35

PowerTrac® Beagle (Telemetry)

13

® ® ®

™ ™ ™

®

®

®

AUXILIARY EQUIPMENT

36

ROTATIONAL SERVICES

14

PowerTrac Release Sub Systems

37

PowerTrac Direct Drive Rotation

15

Mono- and multi-conductor release tools

38

®

®

PowerTrac® Jar™ 39

SCALE REMOVAL SERVICES

16

PowerTrac® Orientation Sub

40

PowerTrac RockBit 17

Fast sampling gauge

41

PowerTrac Hole Opener 18

PowerTrac SwitchSub 42

PowerTrac® String Shot Sub™ 19

DECT – downhole electric cutting tool

43

Instrument Dynamic Controller

44

Logging while Tractoring (LwT)

45

® ®

COLLECTING SERVICES

20

®

PowerTrac Debris Collector 21 ®

PowerTrac® Hydrate Plug Remover™

22

LOCATIONS 46

PowerTrac SuctionTool 23 ®

BRUSHING AND HONING SERVICES 24 PowerTrac® Brush™ 25 PowerTrac® Expandable Brush™

26

PowerTrac Axial Hone/TwinHone

27

MILLING SERVICES

28

®

PowerTrac Hole Saw 29 ®

Upwards opening flapper milling

30

5


Service offered

6

Production logging

Milling and scale removal/ debris collecting

Perforating and plug setting

Sliding sleeve and valve manipulation

Logging while tractoring


Quick view

1999 – 2014 tool performance

5 639 tractor jobs

10 189 runs

8 252 908 m

>98% operating efficiency

7


HORIZONTAL WELLS Horizontal and highly deviated wells are drilled to target

Today, the PowerTrac® Advance™ has an outstanding

specific pay zones in the oil and gas reservoirs. They

performance record. It has made a significant contribution

may increase the recovery percentage from onshore and

to the reduction of operational cost, compared to the use

offshore fields. The ability to drill such wells provides cost

of alternative intervention methods. By using wireline

effective means for extracting resources from reservoirs,

tractors we eliminate the need for more heavily equipped

that may not otherwise have been economically viable.

and costly well interventions. It saves the operator both time and money, while reducing the risk of damage and

Due to the increase in highly deviated and horizontal

pollution.

wells, there is a need for intervention technologies that allow for down-hole operations in such wells.

In addition, to equipment conveyance, we continue to develop tractor technology. We are expanding our range

Qinterra Technologies’ response has been to develop a

of services, including scale milling, brushing, honing and

wireline tractor that can push well intervention equipment

tools for removal of debris in the wellbore. Other services,

several kilometres along highly deviated and horizontal well

such as gas-lift valve replacement and shifting of sliding

sections. Qinterra Technologies started operating tractors

sleeves in horizontal well sections, are possible using the

back in 1996, culminating in the launch of the PowerTrac

®

PowerTrac® Stroker.

Advance™ in 2003.

1999

PowerTrac® 318

2004

PowerTrac® Stroker 318 Scale Milling PowerTrac® Cone Crusher

2009

2000

2005

PowerTrac® Axial Hone

2010

PowerTrac® Advance™ 434 XR Logging While Tractoring PowerTrac® String Shot Sub PowerTrac® Glass Mill

2001

2006

2011

2002

PowerTrac® 318 Rotation Adapter

PowerTrac® Brush PowerTrac® Jar

PowerTrac® Debris Collector PowerTrac® Release Sub 218

PowerTrac® Hone

2007

PowerTrac® Stroker 212 Modified Kick Over Tool Hydraulic Shifting Tool HST PowerTrac® Axial Twin Hone

2012

2003

2008

2013

PowerTrac® Advance™ 318 PowerTrac® Sand Catcher Flapper Valve Mill

8

PowerTrac® Advance™ 218 PowerTrac® Orientation Sub

PowerTrac® Advance™ 434 PowerTrac® Switch Sub Tractor Memory Gauge PPS55 PowerTrac® RockBit

PowerTrac® Stroker 318 HD PowerTrac® Advance™ 318 XR PowerTrac® Hole Opener Ball Valve Milling Instrument Dynamic Controller Multi Conductor Release Tool MRT

PowerTrac® Expandable Brush PowerTrac® Release Sub 318 PowerTrac® DDR 212 & 318

PowerTrac® Beagle


WHY WIRELINE TRACTOR? Qinterra Technologies has since 1999 tractored more than 8 252 908 m. The Qinterra Technologies in-house developed tractor – PowerTrac® Advance™ – is powered via a mono-conductor wireline cable and is compatible with a wide range of third party tools, making it flexible and fit for numerous types of operations. The PowerTrac® Advance™ comes in several sizes with varying pull force, to suit client’s needs and requests for conveyance in common sized well bores. In 2009 Qinterra Technologies introduced the PowerTrac® Advance™ 434 open hole tractor – a tractor that is able to operate in open hole wells and large diameter completions. It also has the capability to reverse in case the cable is key-seated. In 2010 Qinterra Technologies also introduced logging while tractoring, a ground-breaking new technology which makes it possible to log in real time, while the tractor is operating, all on mono-conductor wireline. Although the wireline tractor was originally developed for offshore operations, tractors have now been successfully deployed in unconventional oil and gas reservoirs, such as shale gas and oil sands. The PowerTrac® Advance™ wireline tractor has been utilised for years in wells of steam assisted gravity drainage (SAGD) fields, both during drilling- and the production phase.

Key features of the wireline tractor Pull Force

434XR

6 in

434

6 in

7,15 in

318XR

3,4 in

318

218

2,4 in

238 kg 525 lbs

22 in

14,5 in

13,92 in

10,2 in

7,5 in

>450 kg >1000 lbs

>675 kg >1500 lbs

>909 kg >2000 lbs

>909 kg >2000 lbs

Operating ID 218

318

318XR

434

434XR

* Pull force in standard configuration, extra pull force can be added with additional drive sections

9


PowerTrac ® Advance ™ 218 Shortest wireline tractor on the market

APPLICATIONS

TECHNICAL INFORMATION

·· Production logging

Length*

·· Logging while tractoring

4 042 mm/13.2 ft

·· Pipe recovery

Length per drive section

·· Perforation

505 mm/1.7 ft

·· Plug setting

Body OD

·· Tractor jar

54 mm/2.13 in

·· Drift

OD with rollers

·· Can be used in tandem to negotiate restrictions in wellbore

54 mm/2.13 in

·· Anchor and conveyance for rotational services

64 mm/2.50 in Roller configuration

KEY FEATURES

Drive roller 2.13 in OD standard

·· Cost effective wireline conveyance in horizontal wells

Drive roller 2.50 in OD optional

·· Flexible arms follow ID variations in well

Pressure rating**

·· Compatible with 3rd party tools

1 034 bar/15 000 psi

·· DC voltage operated

Temperature rating

·· Hydraulic drive mechanism

177 °C/350 °F

·· Helicopter transportable

Pull force*

·· Short toolstring length compared to similar products on the market

238 kg/525 lbs Operating ID 2.40-7.13 in 2.70-7.50 in Speed* Up to 20 m/min / 65 ft/min Fishing strength 13 tons/28 000 lbs

* Four drive sections and standard rollers ** 20 000 psi on request. OD increases to 2.50 in

10


PowerTrac ® Advance ™ 318 The workhorse

The PowerTrac® Advance™ 318 tractor is available in a number

TECHNICAL INFORMATION 10¾

of different configurations optimised to work in a wide range of

Length* 4 533 mm/14.9 ft

completion types.

Length per drive section 980 mm/3.2 ft Body OD 81 mm/3.19 in

APPLICATIONS

OD with rollers 85 mm/3.35 in

·· Production logging

Pressure rating** 1 034 bar/15 000 psi

·· Logging while tractoring

Temperature rating 177 °C/350 °F

·· Pipe recovery

Pull force* 453 kg/1 000 lbs

·· Perforation

Extra pull force per drive section 227 kg/500 lbs

·· Plug setting

Operating ID 3.40-10.20 in

·· Tractor jar

Fishing strength 20 tons/44 000 lbs

·· Drift

Speed 20 m/min / 65 ft/min

·· Can be used in tandem to negotiate restrictions in wellbore ·· Anchor and conveyance for rotational services

TECHNICAL INFORMATION 318 Length* 4 330 mm/14.2 ft

KEY FEATURES

Length per drive section 850 mm/2.8 ft

·· Cost effective wireline conveyance in horizontal wells

Body OD 81 mm/3.19 in

·· Flexible arms follow ID variations in well

OD with rollers 85 mm/3.35 in

·· Compatible with 3rd party tools

Pressure rating** 1 034 bar/15 000 psi

·· DC voltage operated

Temperature rating 177 °C/350 °F

·· Helicopter transportable

Pull force* 453 kg/1 000 lbs

·· Hydraulic drive mechanism

Extra pull force per drive section 227 kg/500 lbs Operating ID 3.40-7.80 in Fishing strength 20 tons/44 000 lbs Speed 20 m/min / 65 ft/min

TECHNICAL INFORMATION 318XR Length* 5570 mm/18.3 ft Length per drive section 980 mm/3.2 ft Body OD 81 mm/3.19 in OD with standoff 182 mm/7.15 in and 212 mm/8.35 in Pressure rating** 1 034 bar/15 000 psi Temperature rating 177 °C/350 °F Pull force*** 453 kg/1 000 lbs Extra pull force per drive section 150 kg/330 lbs Operating ID 7.15-12.50 in/8.50-13.92 in * Two drive sections and standard rollers ** 20 000 psi and 25 000 psi on request *** With three drive sections and XR rollers

Fishing strength 20 tons/44 000 lbs Speed 25 m/min / 82 ft/min

11


PowerTrac ® Advance ™ 434 / 434XR Bi-directional open hole tractor

APPLICATIONS

TECHNICAL INFORMATION

·· Production logging

Length*

·· Logging while tractoring

6435 mm/21.1 ft

·· Pipe recovery

Length per drive section

·· Perforation

925 mm/3.0 ft

·· Plug setting

Body OD

·· Tractor jar

120 mm/4.75 in

·· Drift

OD with wear brushing

·· Can be used in tandem to negotiate restrictions in wellbore

127 mm/5.00 in

·· Anchor and conveyance for rotational services

Pressure rating**

·· Open hole logging

1 034 bar/15 000 psi Temperature rating

KEY FEATURES

177 °C/350 °F

·· An extended reach is obtained with PowerTrac Advance 434 XR

Pull force***

·· Compatible with 3rd party tools

Up to 907 kg/2 000 lbs

·· DC voltage operated

Operating ID 434

·· Hydraulic drive mechanism

6.00-14.50 in

·· Two tractors can be run in Tandem configuration

Operating ID 434 XR

·· Helicopter transportable

6.00-22.0 in

·· Possibility for Logging while Tractoring in real time on mono

Fishing strength

®

conductor cable

·· Particularly suitable for open hole and large cased hole operations with low compressive strength

·· Transports tools through horizontal or highly deviated sections which earlier required coiled tubing, snubbing or pipe conveyance

·· Reverse tractor capability with PowerTrac® Advance 434™

* Standard configuration with four drive sections ** ** 20 000 psi and 25 000 psi on request *** Depends on configuration

12

27 tons/60 000 lbs Speed* 10 m/min / 33 ft/min


PowerTrac ® Beagle (Telemetry)

The Beagle® telemetry system transmits real time

KEY FEATURES

measurements and status signals between downhole tools

·· Communicates in both directions (up and down) while

and surface equipment. The PowerTrac® Advance tractor, PowerTrac Stroker and the PowerTrac Direct Drive Rotation ®

®

tool, will all benefit from the Beagle telemetry system.

the tractor is running ·· All sensors and control modules inside the downhole tool are based on a bus system, meaning that new features and sensors can be added easily

An internal bus system allows a numerous amount of sensors to be included for monitoring performance data such as application speed, position, tubing ID, pressure, force,

·· A new software interface which is flexible and automatically adapts to the services run ·· The first edition of the system includes the following

temperature whilst operating the tool. This provides better

features:

control and understanding of the well situation thereby

- Two pressure sensors to measure push/pull force

improving the outcome from operations downhole. When

applied by the stroker

the PowerTrac Beagle technology is fully implemented, the

- Accurate measurement of rotation and inclination

range of applications in terms of Integrated Operations (IO),

- of the tool

will improve dramatically as even more detailed operational

- Measurement of acceleration in all axes

parameters may be displayed online.

- Temperature sensors in the oil chamber and

®

electronics section - Possibility to make a program (sequence) for -automatic operation of the tool - Control of the Power Supply Panel and Power - Control Panel from the software - Independent control of all relays

13


Qinterra Technologies has developed a range of rotary equipment as part of the total tractor application package. This includes systems for milling, drilling, brushing, honing, debris collection and other relevant tasks that require rotating motion and/or force.

Quick view

14

2003 – 2014 tool performance

137 rotation jobs

359 runs

First rotational job performed in 2000

No cooling breaks required


PowerTrac ® Direct Drive Rotation The new benchmark in wireline tractor rotational services

The PowerTrac® Direct Drive Rotation (DDR) is a DC-powered downhole

TECHNICAL INFORMATION

rotational system based on the PowerTrac Advance motor technology.

DDR 212

®

Length

When connected under a PowerTrac Advance tractor, the tractor wheel

2 440 mm/8.0 ft

sections provide a anchoring in the tubing and weight on bit, whilst the

Weight

DDR system provide a torque. As a result, a true “milling while tractoring”

34 kg/75 lbs

functionality is provided for. The DDR offers a number of operational and economic

OD

advantages, including; live well intervention, no heavy lifting, small operational

64 mm/2.50 in

footprint and the ability to perform vertical and horizontal intervention work

Pressure rating

with one “turnkey” equipment package. This, fit for purpose, wireline tractor

1 379 bar/20 000 psi

rotational equipment expands the operational possibilities on standard mono

Temperature rating

conductor cables. Conveying high torque rotation equipment, using wireline

177 °C/350 °F

tractors, allows for a range of possibilities, such as; drilling, milling, grinding,

RPM

honing, brushing and various types of debris collection. With a milling bit in

Up to 200

front, the DDR can drill through flapper valves, ball valves, plugs, concrete

Output torque

plugs, scale bridges/areas, glass plugs, composite plugs etc. The overview

Up to 110 Nm at 180 rpm

®

from the surface provides the operator full control over the operation. TECHNICAL INFORMATION APPLICATIONS

KEY FEATURES

DDR 318

·· Milling

·· Robust design

Length

·· Brushing

·· Starts automatically

2 650 mm/8.7 ft

·· Honing

·· Built in electronic protection

Weight

·· Debris collecting

80 kg/176 lbs OD 79 mm/3.12 in Pressure rating 1 379 bar/20 000 psi Temperature rating 177 °C/350 °F RPM Up to 200 Output torque Up to 110 Nm at 180 rpm

15


Since the introduction of our scale milling service in 2004, Qinterra Technologies have removed more than 6 000 metres of scale.

Quick view

16

2004 – 2014 tool performance

59 scale removal jobs

217 runs

11 946 m tubing cleaned

First scale removal 2004


PowerTrac ® RockBit Most versatile and efficient wireline tractor milling bit

MILLS

TECHNICAL INFORMATION

·· Scale

Length*

·· Glass plugs

284 mm/11.18 in

·· Concrete

OD

·· Solid deposits

Current range from 2.55 in to 6.05 in

KEY FEATURES ·· Custom made sizes available on request ·· Rigid ball bearings

* Depending on size

17


PowerTrac ® Hole Opener ™ Reams and aligns scale milling path

APPLICATIONS

TECHNICAL INFORMATION

·· Helps to stabilise bit

Length* 286-314 mm/11.26-12.36 in

KEY FEATURES

Weight*

·· Stabilises and centralises the milling assembly

4-19 kg/10-42 lbs

·· Eliminates the need for time consuming broaching

OD

·· Excellent customer feedback and case history

79 mm/3.13 in

·· Different patterns on reamers to ensure optimal scale removal

91 mm/3.60 in 98 mm/3.86 in 111 mm/4.40 in 114 mm/4.50 in 116 mm/4.60 in 118 mm/4.65 in 137 mm/5.43 in 145 mm/5.72 in 153 mm/6.05 in Pressure rating 1 379 bar/20 000 psi Temperature rating 177 °C/350 °F

* Depending on OD size

18


PowerTrac ® String Shot Sub ™ Targeted scale removal from side pockets

APPLICATIONS

TECHNICAL INFORMATION 3.7

TECHNICAL INFORMATION 4.5

·· Designed to remove scale around gas lift

Length

Length

1 660 mm/5.5 ft

1 660 mm/5.5 ft

Weight

Weight in air

KEY FEATURES

59 kg/130 lbs

80 kg/176 lbs

·· Removes scale around gas lift valve lock,

OD

OD

94 mm/3.70 in

114 mm/4.49 in

Pressure rating

Pressure rating

orientation finger in the SPM orientation

965 bar/14 000 psi

965 bar/14 000 psi

groove

Temperature rating

Temperature rating

150 °C/302 °F

150 °C/302 °F

Minimum tubing ID

Minimum tubing ID

95 mm/3.74 in

119 mm/4.67 in

valve lock in side-pocket mandrels

enabling the pulling tool to latch

·· The primer cord is oriented by locating the

19


Most effective wireline tractor debris collecting system.

Quick view

20

2003 – 2014 tool performance

21 debris removal jobs

79 runs

Minimum debris size contained – 0,002 mm (silt)

Several tool sizes available


PowerTrac ® Debris Collector ™ Scale and debris removal without need for injection or flow

APPLICATIONS ·· Collects scale ·· Collects mud ·· Collects sand

TECHNICAL INFORMATION

2.5”

2.7”

3.5”

3.8”

4.5”

6 142 20.1

6 152 20.2

6 781 22.3

6 791 22.3

6 811 22.4

OD mm/in

64/2.50

69/2.70

89/3.50

97/3.80

114/4.50

Standard capacity l/US fl oz

9.29 314.13

12.8 432.82

26.75 904.53

31.4 1 061.76

50.80 1 717.75

Additional section length mm/ft

1 094 3.6

1 139 3.7

1 241 4.1

1 242 4.1

1 240 4.1

Storage capacity pr section l/US fl oz

2.36 79.80

2.5 84.54

5.16 174.48

5.8 196.12

9.4 317.85

Standard length mm/ft */**

·· Collects silt KEY FEATURES ·· To be used in combination with PowerTrac® Advance™ and PowerTrac® DDR

·· Milling without need for injection or flow ·· Flexible configuration to accommodate different rig up heights, deviations, type of debris etc.

·· Well fluid is filtered out, leaving more room for the debris in the collector

Pressure rating bar/psi Temperature rating °C/°F

Bit type

1 379 bar/20 000 psi

177 °C/350 °F

PowerTrac® Debris Screw™, PowerTrac® Hydrate Plug Remover™, PowerTrac® Bit Interface™

* Depending on configuration ** 5 chambers

21


PowerTrac ® Hydrate Plug Remover ™ Controlled removal of hydrate plugs

APPLICATIONS

TECHNICAL INFORMATION

·· Safe and effective removal of hydrate plug

Length

·· Improves wellbore environment during operation

351 mm/13.84 in OD

KEY FEATURES

102 mm/4.00 in

·· Transports hydrate solvent fluid down to hydrate plug

Reservoir*

·· Cuts and collects hydrate

3.8 PowerTrac® Debris Collector™

·· Hydrate cuttings are dissolved when pulled into lubricator

Pressure rating

·· Multiple runs without opening lubricator

1 379 bar/20 000 psi Temperature rating 177 ˚C/350 ˚F

*Storage capacity, see PowerTrac® Debris Collector™

22


PowerTrac ® SuctionTool ™ Removes debris from latching profiles

APPLICATIONS

TECHNICAL INFORMATION

·· Collects scale

OD Bailer

·· Collects sand

89 mm/3.50 in

·· Collects mud

OD Pump

·· Collects silt

86 mm/3.38 in Capacity – vol per section

KEY FEATURES

4.9 l/166 fl oz

·· Flexible configuration to accommodate different rig up heights, deviations,

Length per bailer section

type of debris etc.

1 190 mm/3.9 ft

·· Well fluid is filtered out leaving more room for the debris in the collector

Max operating temperature

·· Different nozzles for different applications

177 °C/350 °F

·· Can be used in combination with stroker and pulling tool

Max working pressure 1 724 bar/25 000 psi Yield 13,6 tons/30 000 lbs

23


Effective and precise brushing and honing, with excellent track record.

Quick view

24

2003 – 2014 tool performance

52 brushing/ honing jobs

First honing job performed 2003

First brushing job performed 2003

120 runs


PowerTrac ® Brush ™ Effective cleaning of plug setting area

APPLICATIONS

TECHNICAL INFORMATION

·· Cleans tubing, seal bores and profiles

Weight*

·· Removes rust, scale, wax, etc.

15 kg/33 lbs Length*

KEY FEATURES

1 000 mm/3.3 ft

·· Compatible with PowerTrac Advance 218 and 318

Pressure rating

·· Compatible with mono- and multi-conductor cable

1 379 bar/20 000 psi

·· Customised brush length

Temperature rating

·· Customised OD

177 ˚C/350 ˚F

®

*Depending on configuration

25


PowerTrac ® Expandable Brush Precise seal bore, flow tube and nipple profile cleaner

APPLICATIONS

TECHNICAL INFORMATION 4.1

·· Passes restrictions and expands

Length

·· Cleans tubings, seal bores and profiles

473 mm/16.62 in

·· Removes rust, scale, wax, GRE lining etc.

Weight 17 kg/30 lbs

KEY FEATURES

OD

·· Compatible with PowerTrac® Direct Drive Rotation™

104 mm/4.10 in

·· Brush elements expand on activation and retract

Expansion range

automatically on deactivation

·· Preset expansion pressure and range

134 mm/5.29 in Pressure rating 1 379 bar/20 000 psi Temperature rating 177 °C/350 °F

TECHNICAL INFORMATION 5.2 Length 492 mm/19.37 in Weight 22 kg/49 lbs OD 132 mm/5.19 in Expansion range 161 mm/6.33 in Pressure rating 1 379 bar/20 000 psi Temperature rating 177 °C/350 °F

26


PowerTrac ® Axial Hone/TwinHone Polishes seal bore areas

APPLICATIONS

TECHNICAL INFORMATION

TECHNICAL INFORMATION

· Polishes seal bores

HONE

TWINHONE

· Combines axial and rotational motion

Length*

Length*

2 000 mm/6.6 ft

3 000 mm/9.8 ft

Weight*

Weight*

KEY FEATURES

30 kg/66 lbs

60 kg/132 lbs

· Customised OD

Stroke length

Stroke length

· Adjustable external no-go for positioning

500 mm/19.69 in

500 mm/19.69 in

Pressure rating

Pressure rating

1 379 bar/20 000 psi

1 379 bar/20 000 psi

Temperature rating

Temperature rating

75 °C/167 °F

75 °C/167 °F

Hone length

Hone length

250 mm/9.84 in

2 x 250 mm/2 x 9.84 in

Min casing/tubing ID

Min casing/tubing ID

86 mm/3.40 in

86 mm/3.40 in

Max casing/tubing ID

Max casing/tubing ID

259 mm/10.20 in

259 mm/10.20 in

for smooth honing

*Depending on configuration

27


Wide range of milling services, with field proven track records.

Quick view

28

2003 – 2014 tool performance

52 brushing/ honing jobs

62 milling jobs

First milling job 2003

Several sizes available


PowerTrac ® Hole Saw ™ Effective milling of flappers and ball valves

APPLICATIONS ·· Mills flappers, ball valves and other metal objects KEY FEATURES ·· Compatible with PowerTrac® Direct Drive Rotation™ ·· Custom made sizes available on request ·· Catch mechanism available ·· Current available size range (OD): 25 mm to 140 mm

All work must undergo a qualification programme before job

29


Upwards opening flapper milling Special fit for purpose system for milling of upwards opening flapper valves APPLICATIONS

TECHNICAL INFORMATION 3.23

·· Mills upwards opening flapper valves

Length 450 mm/17.72 in

KEY FEATURES

Weight

·· Compatible with PowerTrac Direct Drive Rotation

3 kg/6 lbs

·· Custom made sizes available on request

OD

·· Catch mechanism available

82 mm/3.23 in

®

Pressure rating 1 379 bar/20 000 psi Temperature rating 177 °C/350 °F

Before performing special operations, qualification tests must be performed to optimise performance. Gearing, weight on bit, bit alternatives etc. must be calculated and tested. Delivery time will depend on complexity and available resources.

30


Qinterra Technologies supplies a variety of stroker types, all with excellent track records.

Quick view

2005 – 2014 tool performance

85 stroker jobs

219 runs

16.1 tons max bidirectional force

Surface read out load control

31


PowerTrac ® Stroker State of the art Beagle telemetry provides detailed control of the downhole performance APPLICATIONS

TECHNICAL INFORMATION 212

TECHNICAL INFORMATION 318

·· Manipulates sliding sleeves

Length* 5 705 mm/18.7 ft

Length* 6 700 mm/22.0 ft

·· Valve manipulation; FIV, ICV, AFIV, etc.

Weight* 82 kg/181 lbs

Weight* 197kg/434 lbs

·· Retrieves and installs valves in side

OD 64 mm/2.50 in

OD

Pressure rating

MRS** 86 mm/3.37 in

·· Pull plugs and packers

1 034 bar/15 000 psi

MRS** 99 mm/3.90 in

·· Fishing

Temperature rating

Pressure rating 1 034 bar/15 000 psi

·· Load and position control when

177 ˚C/350 ˚F

Temperature rating 177 ˚C/350 ˚F

Min ID 67 mm/2.62 in

Min ID 86 mm/3.40 in

pocket mandrels

combined with Beagle telemetry

Max ID 104 mm/4.09 in

Max ID 168 mm/6.60 in

KEY FEATURES

Stroke length

Stroke length

·· Fully fail-safe

508 mm/20.00 in

508 mm/20.00 in

·· Complete survey report

Electrical feed through No

1 016 mm/40.00 in

·· Positioning system resolution of +/-1 mm

Bi-directional force

Electrical feed through Yes

·· Bi-directionally stroke

6.5 tons/14 300 lbs

Bi-directional force 16.1 tons/35 500 lbs

Stroker key features

Bi-directional Force

318 MRS 3,9

4 in

3,40 in

318 MRS 3 3/8

212

2,62 in

6,60 in

5 in

4,09 in

6,5 tons 14300 lbs

16,1 tons 35500 lbs

212

318

Operating ID

* Depending on configuration ** MRS – Multi Range Slips

32


Hydraulic Shifting Tool Easily adapts to standard shifting profiles and sizes

APPLICATIONS

TECHNICAL INFORMATION 2.5

TECHNICAL INFORMATION 3.38

· Shifts sliding sleeves up or down

Length

Length

1 790 mm/5.9 ft

1 500 mm/4.9 ft

KEY FEATURES

OD

OD

· Fail-safe release system

64 mm/2.50 in

86 mm/3.38 in

· To be used in combination with

Pressure rating

Pressure rating

1 034 bar/15 000 psi

1 034 bar/15 000 psi

Temperature rating

Temperature rating

177 ˚C/350 ˚F

177 ˚C/350 ˚F

Profile ID

Profile ID

71 mm/2.81 in

94 mm/3.69 in

Electrical feed through No

Electrical feed through* Yes

TECHNICAL INFORMATION 3.5

TECHNICAL INFORMATION 4.41

Length

Length

1 870 mm/6.1 ft

1 500 mm/4.9 ft

OD

OD

89 mm/3.50 in

112 mm/4.41 in

Pressure rating

Pressure rating

1 034 bar/15 000 psi

1 034 bar/15 000 psi

Temperature rating

Temperature rating

177 ˚C/350 ˚F

177 ˚C/350 ˚F

Profile ID

Profile ID

94 mm/3.69 in

116 mm/4.56 in

Electrical feed through Yes

Electrical feed through* Yes

PowerTrac® Stroker

· Bi-directional manipulation of sliding sleeves

· Custom made shifting dogs available on request

* Depending on configuration

33


PowerTrac ® Stroker Shifting Tool Short, simple and reliable The PowerTrac® Stroker Shifting Tool(SST) is used in combination with the

TECHNICAL INFORMATION

PowerTrac Stroker.

Length

®

0,45 m The SST is deployed slick with the shifting dogs retracted into the tool body (centraliser

OD front guide

housing), to ensure that it cannot hang up in well profiles during conveyance. At the

3.858”

required working depth, the SST is activated and deactivated by the PowerTrac

OD housing/Centraliser

®

Stroker. Completion valves like Schlumberger MFIV or other sleeves can be manipulated

4.205”

downwards in the same run.

Maximum SST dog range 4.861”

To secure an effective performance, qualification tests are performed before each

Max operating temp

operation (in onshore test cells).

177º C Max working pressure 25 000 psi

34

The SST systems are as of today qualified to manipulate: Schlumberger MFIV 9-5/8 in

Shifting dogs (number) 3

MFIV-II-9X 8.250 X 4.250. (Drift ID 4,205 in). Opening direction is down.

Electrical feed through N/A


Improved Kick-over Tool Retrieves/installs side pocket valves in highly deviated wells Designed to be used with PT stroker. Over 50 settings and pulling sequences

TECHNICAL INFORMATION

performed in one SPM without visible or measurable changes to the SPM.

Available sizes 3.50 in

With Beagle telemetry the operator has full control over every aspect

4.50 in

of retrieval and installation of SPM valves.

5.50 in 7.00 in

APPLICATIONS

Temperature rating

· Retrieves and installs valves in side pocket mandrels

177 °C/350 °F Pressure rating

KEY FEATURES

1 379 bar/20 000 psi

· Compatible with PowerTrac Stroker ®

· Improved tool orientation

PowerTrac ® Impactor ™ Ceramic disc breaker APPLICATIONS

TECHNICAL INFORMATION

· Crushes ceramic discs

Length 1 900 mm/6.2 ft

KEY FEATURES

Dart length

· Compatible with PowerTrac Stroker

450 mm/1.5 ft

· Spring forced resetting

OD

®

80 mm/3.15 in Temperature rating 177 °C/350 °F Pressure rating 1 724 bar/25 000 psi Activation pressure 1200 kg / 2650 lbs Chisel impact 1500 N/mm2 (MPa)

35


Qinterra Technologies’ well intervention services can provide a range of auxiliary tools and services to customise operations according to our client’s needs.

36


PowerTrac ® Release Sub Systems Intelligent release mechanism

APPLICATIONS

TECHNICAL INFORMATION 218

TECHNICAL INFORMATION 318

·· Intelligent release mechanism

Length

Length

1 040 mm/3.41 in

1 200 mm/3.9 ft

KEY FEATURES

Weight

Weight

·· Surface controlled release

14 kg/29 lbs

29 kg/64 lbs

·· Battery backup with timer release

OD

OD

·· Available for use between Stroker and

54 mm/2.13 in

79 mm/3.13 in

Pressure rating

Pressure rating

·· Hepta connection available

1 034 bar/15 000 psi

1 034 bar/15 000 psi

·· Several release tools can be combined

Temperature rating

Temperature rating

177 °C/350 °F

177 °C/350 °F

·· Leaves a clean fishing neck

Tensile strength

Tensile strength

·· Replaces cable head weak point

5 tons/11 000 lbs

23 tons/50 000 lbs

Minimum tubing ID

Minimum tubing ID

61 mm/2.40 in

89 mm/3.50 in

Fish neck

Fish neck

35 mm/1.38 in

44 mm/1.75 in

pulling tool

in the same toolstring

37


Mono- and multi-conductor release tools Surface controlled release tools

APPLICATIONS

TECHNICAL INFORMATION

TECHNICAL INFORMATION

· Release mechanism

ART-H

MRT-B

Length

Length**

KEY FEATURES

705 mm/2.31 ft

970 mm/3.18 ft

· Surface controlled release point

Weight

Weight

· Replaces cablehead weak-point

9 kg/19 lbs

24 kg/52 lbs

· Up to 7 different ART or MRT tools can

OD

OD

54 mm/2.13 in

86 mm/3.37 in

· Plug and perforation compatible

Pressure rating

Pressure rating

· Leaves a 1 3/16 (ART) or 2 3/8 (MRT)

1 034 bar/15 000 psi

1 379 bar/20 000 psi

Temperature rating

Temperature rating

· Unique digital code per tool

177 °C/350 °F

177 °C/350 °F

· 10 feed-through wires for

Fishing strength

Fishing strength

6 000 kg/13 200 lbs

6 300 kg/14 000 lbs

Fishing neck

Max working load

1 3/16 in

7 200 kg/16 000 lbs

Max working load

Fishing neck

3 000 kg/6 600 lbs

2 3/8 X 10 in

Min pressure for release

H2S/CO2 operation

34 bar/500 psi

NACE MRO-175 2001

be placed in one toolstring

fishing neck when released

multiconductor toolstrings

· Compatible with Baker Atlas 10-pin or Schlumberger 31-pin tool connections

*Maximum recommended load **Length excludes heads

38


PowerTrac ® Jar ™ Bi-directional wireline tractor jar

APPLICATIONS

TECHNICAL INFORMATION

·· Pulling of plugs

Length

·· Fishing

4 800 mm/15.7 ft

·· Breaking glass plugs

Weight 70 kg/154 lbs

KEY FEATURES

OD

·· Works in highly deviated and horizontal well sections

73 mm/2.88 in

·· Max impact generated at 880 Ibs preload force

Max impact force

·· Double acting (up/down)

19 tons/42 000 lbs

·· Hydraulic time delay for activation

39


PowerTrac ® Orientation Sub Orientation of wireline tractors and tools in side pockets

APPLICATIONS

TECHNICAL INFORMATION 3.71

TECHNICAL INFORMATION 4.48

·· Eliminates need for tandem tractors

Length

Length

330 mm/12.99 in

350 mm/13.73 in

Weight

Weight

15 kg/32 lbs

23 kg/51 lbs

outside of pocket and makes it possible

OD

OD

to drive tractor through SPM

94 mm/3.71 in

114 mm/4.48 in

Pressure rating

Pressure rating

1 379 bar/20 000 psi

1 379 bar/20 000 psi

Temperature rating

Temperature rating

177 ˚C/350 ˚F

177 ˚C/350 ˚F

Electrical feed through

Electrical feed through

Yes

Yes

in side pocket mandrels (SPM)

·· Orients tractor so that wheels will pass

40


Fast sampling gauge

Fast sampling memory gauge for PowerTrac ® Advance ™

APPLICATIONS

TECHNICAL INFORMATION

·· Memory pressure and temperature monitoring during well operations with

Length 241 mm/9.49 in

tractor and stroker

·· Designed to be used whilst perforating

OD 19 mm/0.75 in

KEY FEATURES

Pressure rating

·· Memory pressure and temperature gauge

690 bar/10 000 psi

·· Installed in top sub of PowerTrac Advance or PowerTrac Stroker

Pressure accuracy

·· Fast sampling rate

±0.1%

®

®

Pressure resolution 0.005% Pressure drift < 3 psi/year Temperature rating 177 °C/350 °F Temperature accuracy ± 0.5 °C Temperature resolution 0.05 °C Sensor Silicon-Sapphire Memory capacity 4 000 000 data sets Sample rate Up to 500 data sets/sec

41


PowerTrac ® SwitchSub ™ Multiconductor switch sub, enabling towing of seismic geophones

APPLICATIONS

TECHNICAL INFORMATION

·· Pulling geophone arrays into well

Length 750 mm/2.5 ft

KEY FEATURES

Weight

·· Allows tractor to be placed under toolstring

20 kg/44 lbs

·· Surface controlled

OD

·· Placed between cablehead and logging tools

80 mm/3.15 in Pressure rating 1 034 bar/15 000 psi Temperature rating 177 °C/350 °F

42


DECT – downhole electric cutting tool Precision cutting of downhole tubulars and mandrels

APPLICATIONS

TECHNICAL INFORMATION

TECHNICAL INFORMATION

·· Cuts tubing, drillpipe and packer

DECT 001

DECT 002

Length*

Length*

4880-7620 mm/16-25 ft

4880-7620 mm/16-25 ft

KEY FEATURES

Weight*

Weight*

·· Cleanly cuts downhole tubulars

mandrels

77-109 kg/170-240 lbs

77-109 kg/170-240 lbs

without using hazardous chemicals

OD

OD

or explosives

68 mm/2.69 in

84 mm/3.325 in

·· Standard mono-conductor cable

Pressure rating

Pressure rating

·· Single run wireline intervention

1 034 bar/15 000 psi**

1 379 bar/20 000 psi

·· Cutting operations are monitored at

Temperature rating

Temperature rating

the surface for blade advancement,

150 ˚C/302 ˚F

150 ˚C/302 ˚F

power consumption and cutting noise

Head diameter

Head diameter

level for smooth progress

2.75 in/3.25 in

3.63 in

·· Multiple cuts possible in a single run

Min recommended restriction

Min recommended restriction

·· Reduced logistical costs

76 mm/3.00 in / 89 mm/3.50 in

98 mm/3.87 in

·· Neutral or up to 20 klbs over-pull on

Cutting range

Cutting range

76-130 mm/2.99-5.10 in

98-180 mm/3.87-7.10

89-142 mm/3.50-5.60 in***

Max cut depth

Max cut depth

19 mm /0.75 in

19 mm/0.75 in / 19 mm/0.75 in****

Anchor range

Alternative head setup

98-166 mm / 3.87-6.54 in

tubing recommended

-/25Cr, Inconel Anchor range 76-127 mm/2.99-5.00 in Standard head setup Carbon steels- L80, P110, S135 13 Cr Steels

• •

* **

Depends on configuration DECT001 will have a pressure rating of 20 000 psi if the DECT is fitted with an upgraded pressure housing and adapters. Adaptors are also required for each tool joint in the string *** 3.5-6.1 in with spacer **** 1.00 in with spacer

• •

43


IDC – Instrument Dynamic Controller Surface controlled friction tool

APPLICATIONS

TECHNICAL INFORMATION

·· Increases toolstring friction when tractoring uphill

Length 1 080 mm/42.5 in

KEY FEATURES

OD

·· Can be fitted with different profile contact pads for different

80 mm/3.13 in

casing diameters

44

Pressure rating

·· Simple open and close function via Multi Purpose Panel

1 379 bar/20 000 psi

·· Shear pin overpull release to close arms in case of motor failure

Maximum torque

·· Combinable with Guardian power swivel joint to allow clients to

200 Nm

orientate guns to any position within the wellbore relative to the

Operating range

low side of the hole

89–224 mm/3.50–8.80 in


LOGGING WHILE TRACTORING (LWT) PowerTrac® Advance™ and production logging on mono-conductor cable The PowerTrac® Advance™ system (wireline tractor and/or stroker) has the advantage of being operated on monoconductor cables with low DC currents. Qinterra Technologies has developed a sub capable of performing production logging (PLT) simultaneously as the tractor is deploying the tools downhole – on mono-cable.

UNIQUE ADVANTAGES

KEY FEATURES

·· Data quality greatly improved when logging in undisturbed flow

·· Increased record quality for production logging

·· Smooth continuous down passes with adjustable speed

·· Available on both PowerTrac® Advance 218™ and PowerTrac®

·· Applicable on all standard mono-conductor cables ·· Cased hole or barefoot completions up to 9.63 in

Advance 318™

·· Increases the efficiency of logging services

·· Flexible logging company choice – compatible with all UltraWire™ telemetry tools

·· All conventional production logging sensors ·· Horizontal logging tools – MAPS ·· Records logging data while tractoring

45


QINTERRA TECHNOLOGIES LOCATIONS CANADA UNITED STATES GHANA EQUATORIAL GUINEA AZERBAIJAN SAUDI ARABIA UNITED ARAB EMIRATES OMAN MALAYSIA

ALTUS INTERVENTION LOCATIONS NORWAY DENMARK UNITED KINGDOM

46


47


ALTUS INTERVENTION

QINTERRA TECHNOLOGIES

SAUDI ARABIA Alkhobar Tel: +971 (2) 555 9958 Novotel Business Park

NORWAY

NORWAY

Tower # 4, 1st floor

Stavanger

Sandnes

Khobar Dammam Highway

Tel: +47 51 95 16 00

Tel: +47 51 95 16 00

PO Box 402

Lagerveien 30

Luramyrveien 51

31952, Alkhobar

PO Box 281

NO-4313 Sandnes

Kingdom of Saudi Arabia

NO-4066 Stavanger

Norway

Norway

RUSSIA Narvik

Moscow

Bergen

Tel: +47 51 95 16 00

Tel: +7 495 663 8392

Tel: +47 51 95 16 00

Teknologiveien 12

33 bld 1, Usacheva Street

Sandslihaugen 10

PO Box 643

119048 Moscow

5254 Sandsli

NO-8517 Narvik

Russia

Norway

Norway AZERBAIJAN

UNITED KINGDOM

CANADA

Baku

Aberdeen

Calgary

Tel: +994 12 565 0962/63/64

Tel: +44 (0) 1224 783707

Tel: +1 (403) 212 3611

Lokbatan District,

Badentoy Crescent

533, 71 Ave S.E.

Salyan Highway 15km 5

Portlethen

Calgary

Baku Az1063

Aberdeen

Alberta T2H 2Y2

Azerbaijan

USA

MALAYSIA

Houston

Kuala Lumpur

DENMARK

Tel: +1 713 683 2805

Tel: +603 2162 4300

Esbjerg

15150 Sommermeyer Street

Suite 7.6 Level 7

Tel: +45 209 965

Suite 100

UOA II Building

Havdigevej 17

Houston

21 Jalan Pinang

6700 Esbjerg

TX 77041

Kuala Lumpur 50450

Denmark

USA

Malaysia

UNITED ARAB EMIRATES

EQUATORIAL GUINEA

Abu Dhabi

Malabo

Tel: +971 2 555 9985/58

K5 Oil Centre

Sector M3-Plot 20, Musaffah

Carretera del Aeropuerto

PO Box 108931

Malabo Equatorial Guinea

AB12 4YD UK

United Arab Emirates GHANA OMAN

Takoradi

Muscat

Intex Company Ltd.

Tel: +968 246 13 770

Mphor Road

Athaiba, 18th November Street,

Apowa

altusintervention.com

Way No 4627, Building No 382,

Takoradi

qinterra.com

Muscat, Sultanate of Oman

Ghana

Wireline tractor catalogue  
Read more
Read more
Similar to
Popular now
Just for you