Issuu on Google+

Anchors SECTION 1

ANCHORS MELBOURNE 03 9330 0555

SYDNEY 1300 255 327

Adelaide 08 8396 2781


1: ANCHORS TABLE OF CONTENTS 1: ANCHORS

PAGE

1A: Mechanical Bolt Anchors

1.003

1B: Mungo速 Nylon Anchors

1.018

1C: Light Duty Masonary Anchors

1.024

1D: Cavity, Plasterboard & Hollow Wall Anchors

1.029

1E: Fastdrive速 & Spike速 Concrete Anchors

1.034

1F: Chemical Adhesive Anchors

1.037

1G: Powder & Fuel Actuated Anchors

1.041

1.002

MELBOURNE 03 9330 0555 息 2011 ALLFASTENERS

SYDNEY 1300 255 327


1: ANCHORS

Information listed below is based on anchor “minimum” embedment depth and “maximum” fixture thickness. Increased embedment depth and reduced fixture thickness is permitted. Consult our sales team for further assistance.

1A.001 S  leeve Anchor Hex Head Carbon Steel Yellow Passivated ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

MAX.FIXTURE THICKNESS

1HSY06.5020 1HSY06.5025 1HSY06.5035 1HSY06.5055 1HSY06.5075 1HSY08040 1HSY08065 1HSY08085 1HSY10040 1HSY10050 1HSY10060 1HSY10075 1HSY10095 1HSY10120 1HSY10125 1HSY12060 1HSY12075 1HSY12100 1HSY12130 1HSY16065 1HSY16110 1HSY16145 1HSY20075 1HSY20105 1HSY20150

6.5 x 20mm 6.5 x 25mm 6.5 x 35mm 6.5 x 55mm 6.5 x 75mm 8 x 40mm 8 x 65mm 8 x 85mm 10 x 40mm 10 x 50mm 10 x 60mm 10 x 75mm 10 x 95mm 10 x 120mm 10 x 125mm 12 x 60mm 12 x 75mm 12 x 100mm 12 x 130mm 16 x 65mm 16 x 110mm 16 x 145mm 20 x 75mm 20 x 105mm 20 x 150mm

6.5mm 6.5mm 6.5mm 6.5mm 6.5mm 8mm 8mm 8mm 10mm 10mm 10mm 10mm 10mm 10mm 10mm 12mm 12mm 12mm 12mm 16mm 16mm 16mm 20mm 20mm 20mm

2mm 5mm 5mm 25mm 45mm 5mm 30mm 50mm 6mm 10mm 20mm 35mm 55mm 80mm 80mm 10mm 25mm 50mm 80mm 10mm 55mm 90mm 15mm 45mm 90mm

$/100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 25 25 25 25 10 10 10 10 10

1000 1000 1000 1000 1000 1000 500 500 500 500 500 500 400 300 300 400 250 250 200 200 100 100 100 60 60

1A.002 S  leeve Anchor Hex Head Grade 316 Stainless Steel ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

MAX.FIXTURE THICKNESS

1HSS06.5035 1HSS06.5055 1HSS06.5075 1HSS08040 1HSS08065 1HSS08085 1HSS10040 1HSS10050 1HSS10060 1HSS10075 1HSS10095 1HSS12060 1HSS12075 1HSS12100

6.5 x 35mm 6.5 x 55mm 6.5 x 75mm 8 x 40mm 8 x 65mm 8 x 85mm 10 x 40mm 10 x 50mm 10 x 60mm 10 x 75mm 10 x 95mm 12 x 60mm 12 x 75mm 12 x 100mm

6.5mm 6.5mm 6.5mm 8mm 8mm 8mm 10mm 10mm 10mm 10mm 10mm 12mm 12mm 12mm

5mm 25mm 45mm 5mm 30mm 50mm 6mm 10mm 20mm 35mm 55mm 10mm 25mm 50mm

$/100 100 100 100 100 50 50 50 50 50 50 50 50 25 25

1000 1000 1000 1000 500 500 500 500 500 500 400 400 250 250

Masonary Drill Bits available. See Drilling section, page 8.099 Adelaide 08 8396 2781

ice, v r e s ll We soelutions &s s aving s

1.003 © 2011 ALLFASTENERS


1: ANCHORS Information listed below is based on anchor “minimum” embedment depth and “maximum” fixture thickness. Increased embedment depth and reduced fixture thickness is permitted. Consult our sales team for further assistance.

1A.003 S  leeve Anchor Hex Head Carbon Steel Galvanised ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

MAX.FIXTURE THICKNESS

1HSG08040 1HSG08065 1HSG08085 1HSG10040 1HSG10050 1HSG10060 1HSG10075 1HSG10095 1HSG12060 1HSG12075 1HSG12100 1HSG12130 1HSG16065 1HSG16110 1HSG16145 1HSG20107 1HSG20150

8 x 40mm 8 x 65mm 8 x 85mm 10 x 40mm 10 x 50mm 10 x 60mm 10 x 75mm 10 x 95mm 12 x 60mm 12 x 75mm 12 x 100mm 12 x 130mm 16 x 65mm 16 x 110mm 16 x 145mm 20 x 107mm 20 x 150mm

8mm 8mm 8mm 10mm 10mm 10mm 10mm 10mm 12mm 12mm 12mm 12mm 16mm 16mm 16mm 20mm 16mm

5mm 30mm 50mm 4mm 10mm 20mm 35mm 55mm 10mm 25mm 50mm 80mm 10mm 55mm 90mm 45mm 90mm

$/100 100 50 50 50 50 50 50 50 50 25 25 25 25 10 10 10 10

1000 500 500 500 500 500 500 400 400 250 250 200 200 100 100 60 60

1A.004 S  leeve Anchor Hex Flush Head Carbon Steel Yellow Passivated ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

MAX.FIXTURE THICKNESS

1FHSY06.5036 1FHSY06.5075 1FHSY08045 1FHSY08070 1FHSY08090 1FHSY10045 1FHSY10050 1FHSY10055 1FHSY10065 1FHSY10070 1FHSY10080 1FHSY10100 1FHSY10120 1FHSY12065 1FHSY12080 1FHSY12090 1FHSY12105 1FHSY12120 1FHSY16065 1FHSY16075 1FHSY16110

6.5 x 36mm 6.5 x 75mm 8 x 45mm 8 x 70mm 8 x 90mm 10 x 45mm 10 x 50mm 10 x 55mm 10 x 65mm 10 x 70mm 10 x 80mm 10 x 100mm 10 x 120mm 12 x 65mm 12 x 80mm 12 x 90mm 12 x 105mm 12 x 120mm 16 x 65mm 16 x 75mm 16 x 110mm

6.5mm 6.5mm 8mm 8mm 8mm 10mm 10mm 10mm 10mm 10mm 10mm 10mm 10mm 12mm 12mm 12mm 12mm 12mm 16mm 16mm 16mm

5mm 45mm 10mm 35mm 55mm 5mm 10mm 15mm 25mm 30mm 40mm 60mm 80mm 15mm 30mm 50mm 55mm 50mm 10mm 15mm 50mm

$/100 100 50 100 50 50 50 50 50 50 50 50 50 50 50 25 20 25 20 25 25 10

1000 500 1000 500 500 500 500 500 500 500 500 400 500 300 250 200 250 200 200 200 100

es? i r e v i del s? Homefter hour m! A roble No p

1A.005 S  leeve Anchor Hex Flush Head Grade 316 Stainless Steel ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

MAX.FIXTURE THICKNESS

1FHSS08045 1FHSS08070 1FHSS08090 1FHSS10040 1FHSS10060 1FHSS10075 1FHSS10095 1FHSS12075

8 x 45mm 8 x 70mm 8 x 90mm 10 x 40mm 10 x 60mm 10 x 75mm 10 x 95mm 12 x 75mm

8mm 8mm 8mm 10mm 10mm 10mm 10mm 12mm

10mm 35mm 55mm 6mm 20mm 35mm 55mm 25mm

1.004

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 100 50 50 50 50 50 50 25

1000 500 500 500 500 500 400 250


ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

MAX.FIXTURE THICKNESS

TORQUE SETTINGS

1PUSY16100 1PUSY20100

16 x 100mm 20 x 100mm

16mm 20mm

25mm 15mm

80Nm 180Nm

1: ANCHORS

1A.006 S  leeve Anchor Ultra Shear Flush Head Carbon Steel Yellow Passivated $/100 50 50

500 500

Post Head - Female threaded component for converting hex head, etc., sleeve anchors to countersunk or round head.

1A.007 P  ost Head Countersunk Phillips Grade 316 Stainless Steel ORDER CODE

INTERNAL THREAD

DRILL DIAMETER

HEAD DIAMETER

HEAD HEIGHT

1FPHS06.5M5 1FPHS08M6 1FPHS10M8

M5 M6 M8

6.5mm 8mm 10mm

12mm 14mm 15.5mm

3mm 4mm 4mm

$/100 100 100 100

1000 1000 1000

1A.008 P  ost Head Countersunk & Round Phillips Yellow Passivated ORDER CODE

INTERNAL THREAD

DRILL DIAMETER

HEAD STYLE

1FPHY06.5M5 1FPHY08M6 1FPHY10M8 1RPHY06.5M5 1TWPHZM06 1TWPHZM08 1TWPHZM10 1TWPHZM12

M5 M6 M8 M5 M6 M8 M10 M12

6.5mm 8mm 10mm 6.5mm 6mm Eye 8mm Eye 10mm Eye 12mm Eye

Countersunk Countersunk Countersunk Round Tie Wire Tie Wire Tie Wire Tie Wire

Countersunk Head

$/100 100 100 100 100 100 100 100 100

1000 1000 1000 1000 1000 1000 1000 1000

Tie Wire Head

Round Head

1A.009 S  leeve Anchor Countersunk Phillips Head Carbon Steel Yellow Passivated ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

MAX.FIXTURE THICKNESS

1FSY06.5036 1FSY06.5055 1FSY06.5075 1FSY06.5100 1FSY08060 1FSY08085 1FSY08100 1FSY10063 1FSY10075 1FSY10100 1FSY10120

6.5 x 36mm 6.5 x 55mm 6.5 x 75mm 6.5 x 100mm 8 x 60mm 8 x 85mm 8 x 100mm 10 x 63mm 10 x 75mm 10 x 100mm 10 x 120mm

6.5mm 6.5mm 6.5mm 6.5mm 8mm 8mm 8mm 10mm 10mm 10mm 10mm

6mm 25mm 45mm 70mm 25mm 50mm 65mm 25mm 35mm 60mm 80mm

$/100 100 100 100 100 50 50 50 50 50 50 50

1000 1000 1000 1000 500 500 500 500 500 500 400

1A.033 S  leeve Anchor Countersunk Phillips/Slot Head Carbon Steel Stainless Steel ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

MAX.FIXTURE THICKNESS

1FSS06.5036 1FSS06.5055 1FSS06.5075 1FSS06.5100 1FSS08060 1FSS08085 1FSS08100 1FSS010075 1FSS010100 1FSS010120

6.5 x 36mm 6.5 x 55mm 6.5 x 75mm 6.5 x 100mm 8 x 60mm 8 x 85mm 8 x 100mm 10 x 75mm 10 x 100mm 10 x 120mm

6.5mm 6.5mm 6.5mm 6.5mm 8mm 8mm 8mm 10mm 10mm 10mm

6mm 25mm 45mm 70mm 25mm 50mm 65mm 35mm 60mm 80mm

$/100 100 100 100 100 50 50 50 100 100 100

1000 1000 1000 1000 500 500 500 100 100 100

Adelaide 08 8396 2781

1.005 © 2011 ALLFASTENERS


1: ANCHORS 1A.010 S  leeve Anchor Round Phillips Head Carbon Steel Yellow Passivated ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

MAX.FIXTURE THICKNESS

1RSY06.5032 1RSY06.5050 1RSY06.5070 1RSY06.5095

6.5 x 32mm 6.5 x 50mm 6.5 x 70mm 6.5 x 95mm

6.5mm 6.5mm 6.5mm 6.5mm

7mm 20mm 40mm 65mm

$/100 100 100 50 50

1000 1000 500 500

1A.011 Suspension Anchor Carbon Steel Yellow Passivated ORDER CODE

Description

DRILL DIAMETER

EMBEDMENT DEPTH

1SUSY06.5025 1SUSY06.5035 1EBY08045 1HBY08045 1TWTBY06060 1TWTBY06120 1TWY06060M6 1TWY06060M8 1TWY06060M10

Suspension 6.5 x 25mm Suspension 6.5 x 35mm Eye Bolt 8 x 45mm Hook Bolt 8 x 45mm Tie Wire Through Bolt 6 x 60mm Tie Wire Through Bolt 6 x 120mm M6 Int. Threaded Through Bolt 6 x 60mm M8 Int. Threaded Through Bolt 6 x 60mm M10 Int. Threaded Through Bolt 6 x 60mm

6.5mm 6.5mm 8mm 8mm 6mm 6mm 6mm 6mm 6mm

25mm 35mm 45mm 45mm 40mm 35mm 35mm 35mm 35mm

Suspension Sleeve Anchor

Eye Bolt Sleeve Anchor

Hook Bolt Sleeve Anchor

Tie Wire Through Bolt

$/100 100 100 100 100 100 100 100 100 100

1000 1000 1000 1000 1000 1000 1000 1000 1000

Internal Threaded Through Bolt

VERTIGO™ Rod Suspension System - see Hardware section, page 11.062 1A.012 S  leeve Anchor Component Set Carbon Steel Yellow Passivated ORDER CODE

Description

1COMPYM10 1COMPYM12030 1COMPYM12075 1COMPYM12CONE 1COMPYM12 1COMPYM16

10mm Sleeve, Nut & Cone 12mm x 30 Component Set Spacer Screw Only 12mm x 75 Component Set Expanding Sleeve Only 11mm Component Set Cone only 12mm Sleeve, Nut & Cone 16mm Sleeve, Nut & Cone

DRILL DIAMETER

SLEEVE LENGTH/ THREAD

10mm

40mm

12mm 16mm

40mm 40mm

$/100 100 100 100 100 100 100

-stop e n o r u o Y ner shop faste 1.006

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327

1000 1000 1000 1000 1000 1000


ORDER CODE

Description

DRILL DIAMETER

SLEEVE LENGTH/ THREAD

1SACY06 1SACY08 1SASY08035 1SASY10040 1SASY10070

Cone Cone Sleeve Sleeve Sleeve

8mm 8mm 8mm 10mm 10mm

M6 M8 35mm 40mm 70mm

Information listed below is based on anchor “minimum” embedment depth and “maximum” fixture thickness. Increased embedment depth and reduced fixture thickness is permitted. Consult our sales team for further assistance.

$/100 100 100 100 100 100

1000 1000 1000 1000 1000

Masonary Drill Bits available. See Drilling section, page 8.099

1A.013 T  hrough Bolt Carbon Steel Zinc Silver ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

EMBEDMENT DEPTH

MAX.FIXTURE THICKNESS

1PTBZ06060 1PTBZ06085 1PTBZ06120 1PTBZ08080 1PTBZ08095 1PTBZ08100 1PTBZ08120 1PTBZ10065 1PTBZ10090 1PTBZ10120 1PTBZ12080 1PTBZ12100 1PTBZ12128 1PTBZ12140 1PTBZ12180 1PTBZ16105 1PTBZ16125 1PTBZ16140 1PTBZ16180 1PTBZ16190 1PTBZ20125 1PTBZ20160 1PTBZ20200

6 x 60mm 6 x 85mm 6 x 120mm 8 x 80mm 8 x 95mm 8 x 100mm 8 x 120mm 10 x 65mm 10 x 90mm 10 x 120mm 12 x 80mm 12 x 100mm 12 x 128mm 12 x 140mm 12 x 180mm 16 x 105mm 16 x 125mm 16 x 140mm 16 x 180mm 16 x 190mm 20 x 125mm 20 x 160mm 20 x 200mm

6mm 6mm 6mm 8mm 8mm 8mm 8mm 10mm 10mm 10mm 12mm 12mm 12mm 12mm 12mm 16mm 16mm 16mm 16mm 16mm 20mm 20mm 20mm

32mm 50mm 50mm 55mm 48mm 55mm 55mm 45mm 60mm 60mm 60mm 60mm 70mm 80mm 80mm 80mm 100mm 100mm 95mm 100mm 100mm 120mm 120mm

30mm 26mm 61mm 15mm 35mm 35mm 55mm 10mm 17mm 47mm 5mm 25mm 35mm 45mm 85mm 5mm 10mm 20mm 70mm 70mm 5mm 20mm 60mm

$/100 100 100 50 50 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 25 10 10 10

1000 1000 500 500 500 500 500 250 250 250 250 250 150 150 100 100 100 100 50 50 50 40 30

1A.014 T  hrough Bolt Grade 316 Stainless Steel ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

EMBEDMENT DEPTH

MAX.FIXTURE THICKNESS

1PTBS06040 1PTBS06045 1PTBS06085 1PTBS08050 1PTBS08090 1PTBS10050 1PTBS10060 1PTBS10065 1PTBS10075 1PTBS10090 1PTBS10120 1PTBS12080 1PTBS12100 1PTBS12135 1PTBS16105 1PTBS16140 1PTBS20125 1PTBS20160 1PTBS20200

6 x 40mm 6 x 45mm 6 x 85mm 8 x 50mm 8 x 90mm 10 x 50mm 10 x 60mm 10 x 65mm 10 x 75mm 10 x 90mm 10 x 120mm 12 x 80mm 12 x 100mm 12 x 135mm 16 x 105mm 16 x 140mm 20 x 125mm 20 x 160mm 20 x 200mm

6mm 6mm 6mm 8mm 8mm 10mm 10mm 10mm 10mm 10mm 10mm 12mm 12mm 12mm 16mm 16mm 20mm 20mm 20mm

20mm 23mm 50mm 55mm 55mm 35mm 35mm 45mm 45mm 60mm 60mm 60mm 60mm 80mm 80mm 100mm 100mm 120mm 120mm

16mm 17mm 26mm 25mm 25mm 4mm 4mm 10mm 17mm 17mm 47mm 5mm 25mm 38mm 5mm 20mm 5mm 20mm 60mm

$/100 100 100 100 50 50 25 25 25 50 25 25 25 25 25 25 15 10 10 10

1000 1000 1000 300 300 250 250 250 500 250 250 250 250 150 150 90 60 60 30

Adelaide 08 8396 2781

1.007 © 2011 ALLFASTENERS

1: ANCHORS

1A.012 Sleeve Anchor Component Carbon Steel Yellow Passivated


1: ANCHORS 1A.015 T  hrough Bolt Carbon Steel Galvanised ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

EMBEDMENT DEPTH

MAX.FIXTURE THICKNESS

1PTBG08080 1PTBG08100 1PTBG08120 1PTBG10065 1PTBG10090 1PTBG10120 1PTBG12080 1PTBG12100 1PTBG12140 1PTBG12180 1PTBG16105 1PTBG16125 1PTBG16140 1PTBG16190 1PTBG20125 1PTBG20160 1PTBG20200

8 x 80mm 8 x 100mm 8 x 120mm 10 x 65mm 10 x 90mm 10 x 120 mm 12 x 80mm 12 x 100mm 12 x 140mm 12 x 180mm 16 x 105mm 16 x 125mm 16 x 140mm 16 x 190mm 20 x 125mm 20 x 160mm 20 x 200mm

8mm 8mm 8mm 10mm 10mm 10mm 12mm 12mm 12mm 12mm 16mm 16mm 16mm 16mm 20mm 20mm 20mm

55mm 55mm 55mm 45mm 60mm 60mm 60mm 60mm 80mm 80mm 80mm 100mm 100mm 100mm 100mm 120mm 120mm

15mm 35mm 55mm 10mm 17mm 47mm 5mm 25mm 45mm 80mm 5mm 10mm 20mm 70mm 5mm 20mm 60mm

$/100 50 50 50 25 25 25 25 25 25 25 25 25 25 25 10 10 10

500 500 500 250 250 250 250 250 150 150 100 100 100 50 50 40 30

For Hex Screwdriver Bits, see Accessories section, page 14.005 The Power-Bolt速 anchor is a heavy duty sleeve style self-undercut anchor which is vibration resistant and removable. It is available with a finished hex head, or countersunk head with internal hex drive, and can be used in concrete, block, brick and stone.

1A.016 P  ower-Bolt速 Hex Head Carbon Steel High Tensile Zinc Silver ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

EMBEDMENT DEPTH

TORQUE SETTINGS

1RBHZM10057 1RBHZM10075 1RBHZM10089 1RBHZM10100 1RBHZM13070 1RBHZM13095 1RBHZM13121 1RBHZM16075 1RBHZM16085 1RBHZM16100 1RBHZM16125 1RBHZM16150 1RBHZM20083 1RBHZM20108 1RBHZM20133 1RBHZM20184

10 x 57mm 10 x 75mm 10 x 89mm 10 x 100mm 13 x 70mm 13 x 95 mm 13 x 121mm 16 x 75mm 16 x 85mm 16 x 100mm 16 x 125mm 16 x 150mm 20 x 83mm 20 x 108mm 20 x 133mm 20 x 184mm

10mm 10mm 10mm 10mm 13mm 13mm 13mm 16mm 16mm 16mm 16mm 16mm 20mm 20mm 20mm 20mm

50mm 50mm 50mm 50mm 65mm 65mm 65mm 70mm 70mm 70mm 70mm 70mm 75mm 75mm 75mm 75mm

45Nm 45Nm 45Nm 45Nm 80Nm 80Nm 80Nm 135Nm 135Nm 135Nm 135Nm 135Nm 160Nm 160Nm 160Nm 160Nm

$/100 50 50 50 50 50 25 25 20 15 15 15 15 15 10 10 10

300 300 300 300 200 150 150 120 90 90 90 90 90 60 60 40

1A.017 P  ower-Bolt速 Countersunk Internal Hex Drive Head Carbon Steel High Tensile Zinc Silver ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

EMBEDMENT DEPTH

HEAD WIDTH X HEIGHT

TORQUE SETTINGS

1RBCZM10095 1RBCZM10125 1RBCZM10150 1RBCZM13125 1RBCZM16140

10 x 95mm 10 x 125mm 10 x 150mm 13 x 125mm 16 x 140mm

10mm 10mm 10mm 13mm 16mm

50mm 50mm 50mm 65mm 70mm

19 x 6mm 19 x 6mm 19 x 6mm 22 x 6.5mm 28.6 x 8.3mm

45Nm 45Nm 45Nm 80Nm 135Nm

1.008

MELBOURNE 03 9330 0555 息 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 50 50 50 25 15

300 300 300 150 90


ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

EMBEDMENT DEPTH

TORQUE SETTINGS

1RBHSM10057 1RBHSM10089 1RBHSM10100 1RBHSM13070 1RBHSM13121

10 x 57mm 10 x 89mm 10 x 100mm 13 x 70mm 13 x 121mm

10mm 10mm 10mm 13mm 13mm

50mm 50mm 50mm 65mm 65mm

25Nm 25Nm 25Nm 45Nm 45Nm

1: ANCHORS

1A.018 P  ower-Bolt® Hex Head Grade 304 Stainless Steel $/100 50 50 50 50 25

300 300 300 200 150

The PBI BRACE-IT Anchor is a heavy duty thick sleeve expansion anchor that is vibration resistant and removable. It can be used in concrete, stone and some types of solid brick and core filled blockwork. It is suitable for applications including bracing of tilt-up panels, structural steel connections and machinery to concrete.

1A.019 PBI Brace-It Anchor Zinc Yellow ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

MAX.FIXTURE THICKNESS

TORQUE SETTINGS

1PBI12115 1PBI14115

12 x 115mm 14 x 115mm

18mm 20mm

20mm 20mm

90Nm 150Nm

$/100 25 10

75 40

1A.020 S  afety-Plus® Anchor Hex Head Carbon Steel High Tensile Zinc Silver Safety Plus® - A high load thick shield type anchor designed for safety critical applications, such as structural steel applications. Anchors with the letters “LE” in the Order Code, are Limited Embedment. ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

EMBEDMENT DEPTH

MAX.FIXTURE THICKNESS

TORQUE SETTINGS

1SPLEZM08080 1SPZM08090 1SPZM08115 1SPLEZM10090 1SPZM10105 1SPZM10125 1SPLEZM12100 1SPZM12125 1SPZM12150 1SPLEZM16130 1SPZM16145 1SPZM16170

M8 x 80mm M8 x 90mm M8 x 115mm M10 x 90mm M10 x 105mm M10 x 125mm M12 x 100mm M12 x 125mm M12 x 150mm M16 X 130mm M16 x 145mm M16 x 170mm

12mm 12mm 12mm 15mm 15mm 15mm 18mm 18mm 18mm 24mm 24mm 24mm

55mm 80mm 80mm 70mm 90mm 90mm 85mm 105mm 105mm 100mm 125mm 125mm

25mm 15mm 40mm 25mm 20mm 40mm 25mm 25mm 50mm 30mm 25mm 50mm

25Nm 25Nm 25Nm 50Nm 50Nm 50Nm 80Nm 80Nm 80Nm 180Nm 180Nm 180Nm

$/100 50 50 50 50 50 50 25 25 25 10 10 10

n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

1A.021 D  rop-in Anchor Carbon Steel Yellow Passivated ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

EMBEDMENT DEPTH

1DIYM06 1DIYM08 1DIYM10 1DIYM12 1DIYM16 1DIYM20 1DIYU06 1DIYU08 1DIYU10 1DIYU12

M6 x 25mm M8 x 30mm M10 x 40mm M12 x 50mm M16 x 65mm M20 x 80mm 1/4 UNC x 1” 5/16 UNC x 1” 3/8 UNC x 1-9/16” 1/2 UNC x 2”

8mm 10mm 12mm 15mm 20mm 25mm 10mm 10mm 12mm 16mm

27mm 32mm 42mm 52mm 67mm 82mm 27mm 32mm 42mm 52mm

$/100 100 100 50 50 25 25 100 100 50 50

1000 1000 500 400 100 50 1000 1000 500 250

Adelaide 08 8396 2781

1.009 © 2011 ALLFASTENERS


1: ANCHORS 1A.022 D  rop-in Anchor Grade 316 Stainless Steel ORDER CODE

SIZE: THREAD x LENGTH

DRILL DIAMETER

EMBEDMENT DEPTH

1DISM06 1DISM08 1DISM10 1DISM12 1DISM16 1DISM20

M6 x 25mm M8 x 30mm M10 x 40mm M12 x 50mm M16 x 65mm M20 x 80mm

8mm 10mm 12mm 15mm 20mm 20mm

27mm 32mm 42mm 52mm 67mm 82mm

$/100 100 100 50 50 25 25

1000 1000 500 400 100 100

For Drop-In Anchor Setting Tools, see Hand Tools section, page 12.004 1A.023 D  rop-in Anchor Lipped Carbon Steel Zinc Silver ORDER CODE

SIZE: THREAD x LENGTH

DRILL DIAMETER

EMBEDMENT DEPTH

1LPDZM10

M10 x 30mm

12mm

30mm

$/100 50

500

Lipped Drop-In Anchor Setting Tools - see Hand Tools section, page 12.004

Hollow Set Drop-In Anchor - Is designed for anchoring in hollow base materials such as hollow concrete block, brick with holes and hollow core pre-cast concrete panel. It can also be used in solid base material. Material specifications: • Anchor body - Zamac 7 Alloy. • Cone - AISI 12L14 or GR304 Stainless Steel. • Plating (cone) - ASTM B 633, SC1 Type III (Zn/Fe).

1A.024 H  ollow Set Drop-in Anchor Carbon Steel Cone ORDER CODE

THREAD SIZE

DRILL DIAMETER

1DHYU06 1DHYU08 1DHYU10 1DHYU12 1DHYU16 1DHYM10 1DHYM12

1/4” UNC 5/16” UNC 3/8” UNC 1/2” UNC 5/8” UNC M10 M12

10mm 16mm 16mm 20mm 26mm 16mm 20mm

$/100 100 50 50 50 25 100 50

1000 500 500 250 125 500 250

ght i n r e Ov ameday or s rstate? ! inte problem No

1A.025 H  ollow Set Drop-in Anchor Grade 304 Stainless Steel Cone ORDER CODE

THREAD SIZE

DRILL DIAMETER

1DHSU06 1DHSU10

1/4” UNC 3/8” UNC

10mm 16mm

$/100 100 100

1000 500

For Hollow Set Drop-In Anchor Setting Tools, see Hand Tools section, page 12.004

1.010

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327


ORDER CODE

SIZE: THREAD x LENGTH

DRILL DIAMETER

EMBEDMENT DEPTH

1SNM10

M10 x 30mm

12mm

35mm

1: ANCHORS

1A.026 S  nake Drop-in Anchor Carbon Steel $/100 50

500

For Snake Drop-In Anchor Setting Tool, see Hand Tools section, page 12.004 1A.027 S  hield Anchor Carbon Steel Zinc Silver ORDER CODE

DESCRIPTION

DRILL DIAMETER

EMBEDMENT DEPTH

1LIZM06 1LIZM08 1LIZM10 1LIZM12 1LIZW06 1LIZW08 1LIZW10 1LIZW12

M6 x 35mm M8 x 53mm M10 x 53mm M12 x 65mm 1/4 BSW x 1-3/8” 5/16 BSW x 2-1/16” 3/8 BSW x 2-1/16” 1/2 BSW x 2-9/16”

13mm 16mm 16mm 22mm 13mm 16mm 16mm 22mm

40mm 60mm 60mm 70mm 40mm 60mm 60mm 70mm

$/100 100 50 50 25 100 50 50 25

1000 500 500 250 1000 600 600 300

Blue-Tip SCREW-BOLT™ anchors have many unique features and benefits that make this innovative anchor exceptionally versatile and useable in a variety of base materials, including concrete, block and brick. Optimum performance is obtained using a combination of patented design concepts. The benefit to the designer is higher load capacities, while the benefit to the user is easy and fast installation. Let’s take a look at how this remarkable product works.

PRODUCT FEATURES Finished hex head with easy to read size identification

Ratchet teeth locks head against fixture

Reverse parabolic threads provide high load capacity

Double lead thread for easy straight centering, fast advancing and higher load capacity

Relief grooves for low installation torque - Provides dust relief

High helix angle for fast installation

Chamfered tip for easy centering

Adelaide 08 8396 2781

1.011 © 2011 ALLFASTENERS


1: ANCHORS One Piece Design Blue-Tip SCREW-BOLT™ anchors are one-piece units featuring a finished hex head formed with an integral washer, a patented dual lead thread, and a chamfered tip. A one-piece design eliminates the possibility of lost anchor parts or improper assembly.

Matches Standard Fixture Holes Blue-Tip SCREW-BOLT™ anchors are designed to match standard fixture holes that are 2mm over nominal to provide a secure fit. Since the Blue-Tip SCREW-BOLTTM is specifically matched to the clearance hole, the need for hole layout is eliminated.

Tight Fit

Concrete

Works in Most Base Materials

Block

Brick

Blue-Tip SCREW-BOLT™ anchors are versatile and can be used in a variety of base materials. This eliminates the need to stock assorted anchor types and learn a variety of installation procedures.

Shallow Embedment

Shallow Embedment Depth Blue-Tip SCREW-BOLT™ anchors can be installed at a shallower embedment than traditional wedge or sleeve anchors reducing the chance of striking reinforcing bars or embedded cables. Drilling size, depth and time can be reduced resulting in significant cost savings.

Close to Edge Installation Blue-Tip SCREW-BOLT™ anchors cut a thread into the base material. Since there are no expansion forces, the Blue-Tip SCREW-BOLT™ anchor can be installed closer to the edge than traditional mechanical anchors without damaging the base material.

3 x Dia.

Fast, Easy, High Speed Installation Blue-Tip SCREW-BOLT™ anchors are fast and easy to install. A chamfer on the working end quickly centers the anchor and a high 30º helix angle allows it to be tightened quickly. The driving or hammering step required with typical anchors is eliminated.

Relief Thread

Low Installation Torque A specially designed relief thread formed in the body of the anchor allows easy tightening at a reduced torque level and generates a dust relief mechanism to prevent jamming of the anchor.

1.012

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

High 30º Helix Angle

SYDNEY 1300 255 327


1: ANCHORS

Double Lead Thread

Double Lead Thread

Blue-Tip SCREW-BOLT™ anchors are designed with a patented double lead, elliptical profile thread to facilitate easy centering, faster installation and higher load capacities.

Finished Appearance & Won’t Spin In The Hole Small Grip

Full Grip

Blue-Tip SCREW-BOLT™ anchors have a finished hex washer head that provides an attractive appearance. They are safer than traditional mechanical anchors where exposed thread above the nut creates a tripping hazard. Blue-Tip SCREW-BOLT™ anchors have specially designed dual threads that engage the base material immediately upon installation. Unlike traditional wedge or sleeve type anchors, they will not spin in the hole during installation.

Easy To Read Length Information

16/150 mm

Blue-Tip SCREW-BOLT™ anchors have both the diameter and length clearly stamped on the head. Inspection is easy since there are no complicated letter codes to memorise.

24 Hr

24 Hr

Immediate High Strength Loading Blue-Tip SCREW-BOLT™ anchors can be loaded immediately, while still providing close to the edge performance. Unlike adhesive anchors, there is no lengthy curing time. This allows for immediate completion of fastening applications.

Blue-Tip SCREW-BOLT™

Adhesives

Removable and Reusable Blue-Tip SCREW-BOLT™ anchors are easy to remove, leaving a neat clean hole. Unlike traditional anchor types, no grinding off of anchors is necessary and anchor components are not left in the drilled hole to cause corrosion. If required, the Blue-Tip SCREW-BOLT™ can be reused in the same hole after rectification or adjustment of the fixing application.

Vibration Resistant Blue-Tip SCREW-BOLT™ anchors are vibration resistant. Unlike traditional anchors that have a small expansion mechanism, the double lead threads grip the base material over the full embedment length and there are no expansion forces to pulverise the concrete. For additional vibration resistance, the ratchet teeth on the underside of the hex washer head lock against the fixture.

Adelaide 08 8396 2781

1.013 © 2011 ALLFASTENERS


1: ANCHORS Comparison of Ultimate Tension Loads

High Strength - Cost Effective Ultimate Tension kN

100

Blue-Tip SCREW-BOLT™ anchors are stronger than traditional wedge or sleeve types. They have the low slip and close edge characteristics of adhesive anchors. A combination of a patented dual lead thread and high strength steel material provide excellent performance. High tension loads often allow the Blue-Tip SCREWBOLT™ to be used at a shallower embedment while high shear loads allow use of smaller diameters.

20mm diameter in 28MPa concrete

Blue-Tip SCREW-BOLT™ @ 150mm = 100kN

80

High Load - Low Deflection

60

Wedge Anchor @ 150mm = 73kN

Low Load - High Deflection

40 20

5 1 Min.

10

15

Deflection mm 1 Min.

5 10 15 20 Sec.

1 Min.

5 10

5 10

15 20 Sec.

15 20 Sec.

Blue-Tip SCREW-BOLT™ anchors save time and money. They are faster to install and easier to use. This helps to increase productivity while reducing worker fatigue. Installation time is decreased by up to 65%. For fast, easy, cost effective high performance installations, the innovative Blue-Tip SCREWBOLT™ anchor is one product that does it all.

12mm Blue-Tip SCREW-BOLT™

Installation Procedure 1. Using the proper diameter bit, drill a hole into the base material to a depth of at least one to two anchor diameters deeper than the embedment required. 2. Blow the hole clean of dust and other material. 3. • Insert the anchor through the fixture into the anchor hole. • Begin tightening the anchor by applying forward pressure when engaging the first thread. Additional initial forward pressure may be required for installation in high strength, dense base materials. • Continue tightening the anchor until the head is firmly seated against the fixture. • In extremely dense materials, use of an impact wrench is recommended. • Be sure the anchor is at the required embedment depth. • Don’t exceed the maximum clamping torque. • The installation is now complete. Installation tips: 1. Use quality hexagonal socket with a ratchet spanner. 2. Where substrate allows, a torque controlled impact wrench can be used. 3. During installation, debris or dust created by the thread cutting action may cause some resistance to be experienced. This is easily overcome by unscrewing the Blue-Tip SCREW-BOLT™ for one turn or more, and then continue to fix to the full embedment.

1.014

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327

16mm Sleeve Anchor

16mm Throughbolt


ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

MAX.FIXTURE THICKNESS

SPANNER SIZE

1BTHY05050 1BTHY06.5030 1BTHY06.5050 1BTHY06.5075 1BTHY06.5100 1BTHY08050 1BTHY08060 1BTHY08075 1BTHY08100 1BTHY10060 1BTHY10075 1BTHY10100 1BTHY10120 1BTHY12075 1BTHY12100 1BTHY12150 1BTHY16100 1BTHY16150

5 x 50mm 6.5 x 30mm 6.5 x 50mm 6.5 x 75mm 6.5 x 100mm 8 x 50mm 8 x 60mm 8 x 75mm 8 x 100mm 10 x 60mm 10 x 75mm 10 x 100mm 10 x 120mm 12 x 75mm 12 x 100mm 12 x 150mm 16 x 100mm 16 x 150mm

5mm 6.5mm 6.5mm 6.5mm 6.5mm 8mm 8mm 8mm 8mm 10mm 10mm 10mm 10mm 12mm 12mm 12mm 16mm 16mm

25mm 5mm 25mm 50mm 75mm 15mm 15mm 40mm 65mm 20mm 35mm 60mm 80mm 25mm 50mm 100mm 35mm 85mm

7mm 10mm 10mm 10mm 10mm 13mm 13mm 13mm 13mm 17mm 17mm 17mm 17mm 19mm 19mm 19mm 24mm 24mm

$/100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 25 15 15

500 500 500 250 250 250 250 250 250 250 250 250 250 150 150 75 60 60

Clearance Hole Size & Minimum Embedment Diameter 5mm 6.5mm 8mm 10mm 12mm 16mm

Clearance Hole Size 7mm 8mm 10mm 12mm 15mm 19mm

Minimum Embedment 25mm 25mm 35mm 40mm 50mm 65mm

1A.029 S  crew-Bolt™ Blue-Tip Countersunk Head Carbon Steel Yellow Passivated ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

INTERNAL HEX DRIVE

MAX.FIXTURE THICKNESS

HEAD WIDTH X HEIGHT

1BTCY06.5050 1BTCY06.5075 1BTCY08050 1BTCY08075 1BTCY08100 1BTCY10060 1BTCY10075 1BTCY10100 1BTCY12075 1BTCY12100 1BTCY12150

6.5 x 50mm 6.5 x 75mm 8 x 50mm 8 x 75mm 8 x 100mm 10 x 60mm 10 x 75mm 10 x 100mm 12 x 75mm 12 x 100mm 12 x 150mm

6.5mm 6.5mm 8mm 8mm 8mm 10mm 10mm 10mm 12mm 12mm 12mm

5mm 5mm 6mm 6mm 6mm 8mm 8mm 8mm 10mm 10mm 10mm

25mm 50mm 15mm 40mm 65mm 20mm 35mm 60mm 25mm 50mm 100mm

16 x 6.5mm 16 x 6.5mm 20 x 8mm 20 x 8mm 20 x 8mm 24.5 x 9.5mm 24.5 x 9.5mm 24.5 x 9.5mm 27.5 x 10.5mm 27.5 x 10.5mm 27.5 x 10.5mm

$/100 100 50 50 50 50 50 50 50 50 50 25

500 250 250 250 250 250 250 250 150 150 75

Further information also available on Blue-Tip SCREW-BOLT™ on request, such as: Maximum Clamping Torque, Anchor Material Specifications, Thread Length, Mechanical Properties, and Design Criteria. Contact our sales team with any enquiry.

For Hex Screwdriver Bits, see Accessories section 14, page 14.005

iled Detaance datay an rm perfoilable on mducts ava chor pro An Adelaide 08 8396 2781

1.015 © 2011 ALLFASTENERS

1: ANCHORS

1A.028 S  crew-Bolt™ Blue-Tip Hex Head Carbon Steel Yellow Passivated


1: ANCHORS 1A.030 S  crew-Bolt™ Blue-Tip Eyebolt Carbon Steel Yellow Passivated ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

INTERNAL EYE DIAMETER

1BTEY06.5050 1BTEY08055 1BTEY10065 1BTEY12075

6.5 x 50mm 8 x 55mm 10 x 65mm 12 x 75mm

6.5mm 8mm 10mm 12mm

12.7mm 15.2mm 17mm 21.6mm

$/100 100 50 50 50

500 250 250 150

1A.036 E  xcalibur Hookbolt Zinc Yellow ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

Internal Hex Drive

1EXHKY06050

6 x 50mm

6mm

12.7mm

$/100 100

500

1A.031 S  crew-Bolt™ Blue-Tip Hex Head Carbon Steel Mechanical Galvanised ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

MAX.FIXTURE THICKNESS

SPANNER SIZE

1BTHG05050 1BTHG06.5030 1BTHG06.5050 1BTHG06.5075 1BTHG06.5100 1BTHG08050 1BTHG08075 1BTHG08100 1BTHG10060 1BTHG10075 1BTHG10100 1BTHG10120 1BTHG12075 1BTHG12100 1BTHG12150 1BTHG16100 1BTHG16150

5 x 50mm 6.5 x 30mm 6.5 x 50mm 6.5 x 75mm 6.5 x 100mm 8 x 50mm 8 x 75mm 8 x 100mm 10 x 60mm 10 x 75mm 10 x 100mm 10 x 120mm 12 x 75mm 12 x 100mm 12 x 150mm 16 x 100mm 16 x 150mm

5mm 6.5mm 6.5mm 6.5mm 6.5mm 8mm 8mm 8mm 10mm 10mm 10mm 10mm 12mm 12mm 12mm 16mm 16mm

25mm 5mm 25mm 50mm 75mm 15mm 40mm 65mm 20mm 35mm 60mm 80mm 25mm 50mm 100mm 35mm 85mm

7mm 10mm 10mm 10mm 10mm 13mm 13mm 13mm 17mm 17mm 17mm 17mm 19mm 19mm 19mm 24mm 24mm

ce, i v r e ll s We soelutions &s s aving s

1.016

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 25 15 15

500 500 500 250 250 250 250 250 250 250 250 250 150 150 75 60 60


ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

Internal Hex Drive

MAX.FIXTURE THICKNESS

Head Width x Height

1BTCG06.5050 1BTCG06.5075 1BTCG08050 1BTCG08075 1BTCG08100 1BTCG10060 1BTCG10075 1BTCG10100 1BTCG12075 1BTCG12100 1BTCG12150

6.5 x 50mm 6.5 x 75mm 8 x 50mm 8 x 75mm 8 x 100mm 10 x 60mm 10 x 75mm 10 x 100mm 12 x 75mm 12 x 100mm 12 x 150mm

6.5mm 6.5mm 8mm 8mm 8mm 10mm 10mm 10mm 12mm 12mm 12mm

5mm 5mm 6mm 6mm 6mm 8mm 8mm 8mm 10mm 10mm 10mm

25mm 50mm 15mm 40mm 65mm 20mm 35mm 60mm 25mm 50mm 100mm

16 x 6.5mm 16 x 6.5mm 20 x 8mm 20 x 8mm 20 x 8mm 24.5 x 9.5mm 24.5 x 9.5mm 24.5 x 9.5mm 27.5 x 10.5mm 27.5 x 10.5mm 27.5 x 10.5mm

1: ANCHORS

1A.038 S  crew-Bolt™ Blue-Tip Countersunk Head Carbon Steel Galvanised $/100 100 50 50 50 50 50 50 50 50 50 25

500 250 250 250 250 250 250 250 150 150 75

1A.032 T  RDAC Screw-Bolt™ Top Plate Tie Down Anchor Carbon Steel Yellow Passivated ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

INTERNAL THREAD SIZE

SPANNER SIZE

1TRDACY12100 1TRDACY12150

12 x 100mm 12 x 150mm

12mm 12mm

M12 M12

19mm 19mm

$/100 25 25

75 75

Make an- call t investmesnervice! us for

TRDAC Screw-Bolt™ - Is the new revolutionary Screw-Bolt™, manufactured from high strength carbon steel, and consists of two key features: • Patented thread design for high expansion free performance, • Internal M12 thread to facilitate M12 threaded rod. The TRDAC Screw-Bolt™ is a quick and simple system, which provides timber frame top plate tie-down to slabs for residential timber frame construction, without the costly time consuming requirements of chemical anchoring systems. It’s unique thread design provides an undercutting effect in the concrete, ensuring optimum performance in residential slabs at minimal edge distance, (e.g. 35mm). A 50 x 50 x 3mm square washer is to be used with the TRDAC Screw-Bolt™. Further technical information is available on request - contact our sales team.

Adelaide 08 8396 2781

1.017 © 2011 ALLFASTENERS


1: ANCHORS 1B.001 M  ungo® MN Nylon Plug ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

Screw Diameter

1MN04 1MN05 1MN06 1MN07 1MN08 1MN10 1MN12 1MN14 1MN16 1MN20

4 x 20mm 5 x 25mm 6 x 30mm 7 x 35mm 8 x 40mm 10 x 50mm 12 x 60mm 14 x 70mm 16 x 80mm 20 x 90mm

4mm 5mm 6mm 7mm 8mm 10mm 12mm 14mm 16mm 20mm

2.2-3mm 2.6-4mm 3.5-5mm 4.5-5mm 4.5-6mm 6-8mm 8-10mm 10-12mm 12-14mm 14-16mm

$/100 100 100 100 100 100 50 25 20 10 5

3600 3600 3600 3600 3600 1800 900 720 360 180

For information on the diameter of screw gauges, see Screws section, page 3.005

1B.002 M  ungo® MNL Long Nylon Plug ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

Screw Diameter

1MNL06 1MNL08

6 x 50mm 8 x 60mm

6mm 8mm

3.5-5mm 4.5-6mm

$/100 100 50

1800 900

1B.003 M  ungo® MU Multi Nylon Plug ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

Screw Diameter

1MU06 1MU08 1MU10 1MU12 1MU14

6 x 35mm 8 x 50mm 10 x 60mm 12 x 70mm 14 x 75mm

6mm 8mm 10mm 12mm 14mm

3-4mm 4.5-6mm 6-8mm 8-10mm 10-12mm

$/100 100 50 25 20 10

3600 1800 900 720 360

1B.004 M  ungo® ML Nylon Plug ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

Screw Diameter

1MU06 1MU08 1MU10 1MU12 1MU14

6 x 35mm 8 x 50mm 10 x 60mm 12 x 70mm 14 x 75mm

6mm 8mm 10mm 12mm 14mm

3-4mm 4.5-6mm 6-8mm 8-10mm 10-12mm

$/100 100 50 25 20 10

3600 1800 900 720 360

1B.005 M  ungo® MQ Nylon Plug ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

Screw Diameter

1MQ06 1MQ08 1MQ10 1MQ12

6 x 30mm 8 x 40mm 10 x 50mm 12 x 60mm

6mm 8mm 10mm 12mm

3.5-5mm 4.5-6mm 6-8mm 8-10mm

$/100 100 100 100 100

3600 3600 1800 900

1B.006 M  ungo® MNA Hammer Screw Pozi Drive Zinc Silver ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

Max. Fixture Thickness

1MNAZ05030 1MNAZ05050 1MNAZ06035 1MNAZ06050 1MNAZ06060 1MNAZ06070 1MNAZ06080 1MNAZ08040 1MNAZ08050 1MNAZ08060 1MNAZ08080 1MNAZ08100 1MNAZ08120

5 x 30mm 5 x 50mm 6 x 35mm 6 x 50mm 6 x 60mm 6 x 70mm 6 x 80mm 8 x 40mm 8 x 50mm 8 x 60mm 8 x 80mm 8 x 100mm 8 x 120mm

5mm 5mm 6mm 6mm 6mm 6mm 6mm 8mm 8mm 8mm 8mm 8mm 8mm

5mm 25mm 10mm 25mm 35mm 45mm 45mm 15mm 15mm 25mm 45mm 60mm 80mm

1.018

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 100 100 100 100 100 100 100 100 100 100 100 100 100

2400 2400 2400 1800 1200 1200 1200 900 900 900 600 600 600


ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

Max. Fixture Thickness

1MNAS05030 1MNAS05050 1MNAS06035 1MNAS06040 1MNAS06050 1MNAS06060 1MNAS06070 1MNAS08060 1MNAS08080 1MNAS08100 1MNAS08120

5 x 30mm 5 x 50mm 6 x 35mm 6 x 40mm 6 x 50mm 6 x 60mm 6 x 70mm 8 x 60mm 8 x 80mm 8 x 100mm 8 x 120mm

5mm 5mm 6mm 6mm 6mm 6mm 6mm 8mm 8mm 8mm 8mm

5mm 25mm 10mm 25mm 25mm 35mm 45mm 25mm 45mm 60mm 80mm

$/100 100 100 100 100 100 100 100 100 100 100 100

2400 2400 2400 1800 1800 1200 1200 900 600 600 600

For Pozi Screwdriver Bits, see Accessories section, page 14.005

1B.008 M  ungo® MB-S Nylon Frame Plug / Hex Head Screw Yellow Passivated ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

Max. Fixture Thickness

1MBRSHY10060 1MBSHY10080 1MBSHY10100 1MBSHY10115 1MBSHY10120 1MBSHY10140 1MBSHY10160 1MBSHY10200 1MBSHY10240 1MBSHY10280 1MBSHY10300

10 x 60mm 10 x 80mm 10 x 100mm 10 x 115mm 10 x 120mm 10 x 140mm 10 x 160mm 10 x 200mm 10 x 240mm 10 x 280mm 10 x 300mm

10mm 10mm 10mm 10mm 10mm 10mm 10mm 10mm 10mm 10mm 10mm

10mm 10mm 30mm 40mm 50mm 70mm 90mm 130mm 170mm 210mm 230mm

$/100 100 100 50 50 50 50 50 50 25 25 25

600 600 450 450 300 300 300 300 n/a n/a n/a

Mungo Nylon Insulation Disc available. See Hardware section, page 11.055

1B.009 M  ungo® MB-S Nylon Frame Plug / Hex Head Screw Galvanised ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

Max. Fixture Thickness

1MBSHG10080 1MBSHG10100 1MBSHG10120 1MBSHG10140 1MBSHG10160

10 x 80mm 10 x 100mm 10 x 120mm 10 x 140mm 10 x 160mm

10mm 10mm 10mm 10mm 10mm

10mm 30mm 50mm 70mm 90mm

$/100 100 50 50 50 50

600 450 300 300 300

1B.010 M  ungo® MB-S Nylon Frame Plug/Countersunk Head Pozi Drive Screw Yellow Passivated Driver: Use No.3 Pozi Screwdriver Bit. ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

Max. Fixture Thickness

1MBRSCZY10060 1MBSCZY10080 1MBSCZY10100 1MBSCZY10120 1MBSCZY10140 1MBSCZY10160 1MBSCZY10200

10 x 60mm 10 x 80mm 10 x 100mm 10 x 120mm 10 x 140mm 10 x 160mm 10 x 200mm

10mm 10mm 10mm 10mm 10mm 10mm 10mm

10mm 10mm 30mm 50mm 70mm 90mm 130mm

$/100 100 100 50 50 50 50 50

600 600 450 300 300 300 300

Adelaide 08 8396 2781

1.019 © 2011 ALLFASTENERS

1: ANCHORS

1B.007 M  ungo® MNA Hammer Screw Pozi Drive Stainless Steel


1: ANCHORS 1B.011 M  ungo® MB-S Nylon Frame Plug/Countersunk Head 6-Lobe Drive Screw Yellow Passivated Driver: Use T1-40 6-Lobe Screwdriver Bit. ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

Max. Fixture Thickness

1MBSCT1Y10080 1MBSCT1Y10100 1MBSCT1Y10120 1MBSCT1Y10135 1MBSCT1Y10140 1MBSCT1Y10160

10 x 80mm 10 x 100mm 10 x 120mm 10 x 135mm 10 x 140mm 10 x 160mm

10mm 10mm 10mm 10mm 10mm 10mm

10mm 30mm 50mm 50mm 70mm 90mm

$/100 100 50 50 50 50 50

600 450 300 300 300 300

1B.012 Mungo® Nylon Frame Plug/Hex Head Screw Grade 316 Stainless Steel ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

Max. Fixture Thickness

1MBSHS10060 1MBSHS10080 1MBSHS10120 1MBSHS10140

10 x 60mm 10 x 80mm 10 x 120mm 10 x 140mm

10mm 10mm 10mm 10mm

10mm 20mm 50mm 70mm

$/100 100 100 50 50

600 600 300 300

1B.013 P  up Frame Plug Hex Galvanised ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

Max. Fixture Thickness

1PUPHG10085 1PUPHG10100 1PUPHG10115 1PUPHG10135 1PUPHG10160

10 x 85mm 10 x 100mm 10 x 115mm 10 x 135mm 10 x 160mm

10mm 10mm 10mm 10mm 10mm

70mm 70mm 70mm 70mm 70mm

$/100 50 50 50 50 50

500 500 500 500 200

1B.014 P  up Frame Plug Countersunk Grade 316 Stainless Steel ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

Max. Fixture Thickness

1PUPCS10085 1PUPCS10100 1PUPCS10115 1PUPCS10135 1PUPCS10160

10 x 85mm 10 x 100mm 10 x 115mm 10 x 135mm 10 x 160mm

10mm 10mm 10mm 10mm 10mm

70mm 70mm 70mm 70mm 70mm

$/100 50 50 50 50 50

500 500 500 500 200

1B.015 P  up Frame Plug Collared Hex Grade 316 Stainless Steel ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

Max. Fixture Thickness

1PUPCHS10085 1PUPCHS10100 1PUPCHS10115 1PUPCHS10135 1PUPCHS10160

10 x 85mm 10 x 100mm 10 x 115mm 10 x 135mm 10 x 160mm

10mm 10mm 10mm 10mm 10mm

70mm 70mm 70mm 70mm 70mm

1.020

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 50 50 50 50 50

500 500 500 500 200


1: ANCHORS

MUNGO® TECHNICAL INFORMATION Mungo® MB-S Nylon Frame Plug/Yellow Passivated Screw

Expansion Zone 1MBs with long expansion zone for low density materials and hollow brick. 1MBRs with normal expansion zone for solid materials.

Knock-In Protection Prevents premature expansion.

Wings and Block Profile Avoids rotation and holds plug firmly in position.

Plug Collar The conical collar prevents the plug from gliding into the hole.

Recommended Loads Code

Hollow Block 6MPa

Hollow Brick 12MPa

1.6 kN 1.6 kN

1.8 kN 1.8 kN

1MBSH 1MBSCZ

Aerated Concrete 2.5MPa

Important: fixings in hollow brick - without hammer drilling. Values only valid when using Mungo

1.1kN 1.1kN

Safety Wood Screws: safety factor = 3.

Mungo® Nylon Plugs Screw Types:

Knock-In Protection Prevents premature expansion while installing.

Wood

Block Profile Holds the plug firm in the hole, stops rotation and guarantees immediate grip as the plug expands.

Mungo® MN NYLON PLUG Method of Installation: Through and pre-assembly fixing. For use in: Concrete, Natural Stone, Brick, Sandstone, Gypsum.

Fixing with MN and Wood/Chipboard Screw (pre-assembly fixing).

Fixing with MN and Metal Thread/Bolt (through fixing).

Chipboard

Metal Thread/Bolt

M-Teeth Ensuring complete radial expansion during screw insertion.

Stabilization Points Prevents the plug from breaking open while inserting into the hole.

Recommended Loads Code 1MN04 1MN05 1MN06 1MN07 1MN08 1MN10 1MN12 1MN14 1MN16 1MN20

Concrete 20MPa

Brick 12MPa

Aerated Concrete 2.5MPa

0.25 kN 0.4 kN 0.6 kN 0.8 kN 1.0 kN 1.6 kN 2.5 kN 3.0 kN 3.5 kN 5.2 kN

0.2 kN 0.35 kN 0.5 kN 0.75 kN 0.9 kN 1.0 kN 1.4 kN 1.5 kN – –

0.02 kN 0.04 kN 0.06 kN 0.07 kN 0.09 kN 0.2 kN 0.4 kN 0.5 kN 0.6 kN 1.0 kN

Reached with maximum diameter wood screw: safety factor = 5.

Adelaide 08 8396 2781

1.021 © 2011 ALLFASTENERS


1: ANCHORS Mungo® MNL NYLON PLUG Method of Installation: Through and pre-assembly fixing. For use in: Concrete, Natural Stone, Brick, Sandstone, Gypsum. Major product benefits: Long shank prevents sidesteps. Appropriate for frame fixing.

Recommended Loads Code Long shank prevents sidesteps.

Concrete 20MPa

Brick 12MPa

Aerated Concrete 2.5MPa

0.6 kN 1.0 kN

0.5 kN 0.9 kN

0.06 kN 0.09 kN

1MNL06 1MNL08

Suitable for frame fixing.

Reached with maximum diameter wood screw: safety factor = 5.

Mungo® MU Multi Nylon Plug Screw Types:

Wood

Break Off Flange/ Knock-In Protection Automatic flange detachment ensures suitability for all through fixing applications.

Nodal Point Helps to achieve a perfect knot formation of the plug.

Recommended Loads

Code Concrete 20MPa

Hollow Brick 12MPa

1MU06(1) 1MU06(2) 1MU08(1) 1MU08(2) 1MU10(1) 1MU10(2) 1MU12(1) 1MU14(1)

0.45 kN 0.3 kN 1.0 kN 0.6 kN 1.4 kN 0.6 kN 1.9 kN 2.4 kN

(1)

0.6 kN 0.4 kN 1.3 kN 0.8 kN 2.0 kN 0.8 kN 3.3 kN 4.3 kN

Chipboard

Initial Tension Prevents rotation in the hole.

Aerated Concrete 2.5MPa

Plaster board 12.5mm

Metal Thread/Bolt

Threaded Cone’s End/ Brad Point Superior quality material ensuring excellent pull-out values. Brad point for easy, fast insertion.

Chipboard 13mm

0.3 kN 0.15 kN 0.15 kN 0.4 kN 0.5 kN 0.3 kN 0.18 kN 0.45 kN 0.5 kN 0.4 kN 0.2 kN 0.6 kN 1.2 kN 1.3 kN

Wood screw maximum diameter. (2)Chipboard screw maximum diameter: safety factor = 5.

For use in: Plaster, Aerated Concrete, Hollow Brick (without percussion drilling), Sandstone, Concrete, Chipboard, Plasterboard

Application into gypsum.

1.022

Application into aerated concrete.

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

Ideal fixing with chipboard screw into plasterboard.

SYDNEY 1300 255 327

Expansion in hollow brick.


1: ANCHORS

Mungo® ML Nylon Anchor Screw Types:

Wood

4-times Greater Rotation Resistance on 1ML06 and 1ML08.

Chipboard

Conical Head Prevents movement in the hole while fixing.

Metal Thread/Bolt

5-times Greater Rotation Resistance on 1ML10 and 1ML14.

Use in conjunction with spacer screws like MDS.

Method of Installation: Through fixing. For use in: Hollow Brick, Blockwork, Aerated Concrete (without hammer drilling).

Recommended Loads Code

Hollow Brick 12MPa

Hollow Block 6MPa

Aerated Concrete 2.5MPa

1ML06 1ML08 1ML10 1ML14

0.7 kN 1.3 kN 2.2 kN 3.2 kN

0.6 kN 1.5 kN 2.0 kN 3.0 kN

0.5 kN 0.8 kN 1.1 kN 1.8 kN

Special long expansion zone.

Assembling of wood frames. Assembling of window shutters.

Fixings in Hollow Brick - without hammer drilling: safety factor = 5.

Mungo® MNA Hammer Screw Method of Installation: Through fixing.

For use in: Concrete, Natural Stone, Sandstone, Gypsum, Hollow Brick.

Plug with countersunk collar for flush fixings. Deforming Crumple Zone Allows quick adjustment on uneven surfaces.

Expanding Zone The long expanding zone guarantees optimum stability.

Reinforced Screwhead Facilitates high knock-in loads with the added benefit of plug neck grip.

Plug with cylindrical collar for thin materials.

Recommended Loads Code Concrete 20MPa

Solid Block 12MPa

Sandstone 12MPa

1MNA05 1MNA06 1MNA08 1MNA10

0.3 kN 0.5 kN 0.6 kN 0.8 kN

0.25 kN 0.5 kN 0.6 kN 0.8 kN

0.4 kN 0.6 kN 0.7 kN 0.9 kN

Fastening of metal profiles.

Safety factor = 3.

Adelaide 08 8396 2781

1.023 © 2011 ALLFASTENERS


1: ANCHORS The Tapper™ anchoring system is a family of screw anchors, specially designed drill bits and installation tools, designed to meet the needs of most light to medium duty applications in concrete, block and brick. The Tapper™ concrete screw anchor is produced in either hex washer head or Phillips countersunk head styles.

1C.001 T  apper™ Hex Head ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

EMBEDMENT DEPTH

1/2700 1/2702 1/2704 1/2706 1/2708 1/2710 1/2712 1/2720 1/2722 1/2724 1/2726 1/2728 1/2730 1/2732

3/16 x 1-1/4” (5 x 32mm) 3/16 x 1-3/4” (5 x 45mm) 3/16 x 2-1/4” (5 x 58mm) 3/16 x 2-3/4” (5 x 70mm) 3/16 x 3-1/4” (5 x 83mm) 3/16 x 3-3/4” (5 x 95mm) 3/16 x 4” (5 x 100mm) 1/4 x 1-1/4” (6.5 x 32mm) 1/4 x 1-3/4” (6.5 x 45mm) 1/4 x 2-1/4” (6.5 x 58mm) 1/4 x 2-3/4” (6.5 x 70mm) 1/4 x 3-1/4” (6.5 x 83mm) 1/4 x 3-3/4” (6.5 x 95mm) 1/4 x 4” (6.5 x 100mm)

5/32” 5/32” 5/32” 5/32” 5/32” 5/32” 5/32” 3/16” 3/16” 3/16” 3/16” 3/16” 3/16” 3/16”

25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm

$/100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

500 500 500 500 500 500 500 500 500 500 500 500 500 500

Tapper Drill Bits available. See Drilling section, page 8.102 For Tapper Installation Tools, see Hand Tools section, page 12.004 1C.002 Tapper™ Countersunk Head ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

EMBEDMENT DEPTH

1/2740 1/2742 1/2744 1/2746 1/2748 1/2750 1/2752 1/2760 1/2762 1/2764 1/2766 1/2768 1/2770 1/2772 1/2774 1/2776

3/16 x 1-1/4” (5 x 32mm) 3/16 x 1-3/4” (5 x 45mm) 3/16 x 2-1/4” (5 x 58mm) 3/16 x 2-3/4” (5 x 70mm) 3/16 x 3-1/4” (5 x 83mm) 3/16 x 3-3/4” (5 x 95mm) 3/16 x 4” (5 x 100mm) 1/4 x 1-1/4” (6.5 x 32mm) 1/4 x 1-3/4” (6.5 x 45mm) 1/4 x 2-1/4” (6.5 x 58mm) 1/4 x 2-3/4” (6.5 x 70mm) 1/4 x 3-1/4” (6.5 x 83mm) 1/4 x 3-3/4” (6.5 x 95mm) 1/4 x 4” (6.5 x 100mm) 1/4 x 5” (6.5 x 125mm) 1/4 x 6” (6.5 x 150mm)

5/32” 5/32” 5/32” 5/32” 5/32” 5/32” 5/32” 3/16” 3/16” 3/16” 3/16” 3/16” 3/16” 3/16” 3/16” 3/16”

25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm

$/100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500

1C.022 Concrete Screw Countersunk Head T-30 Torx Drive Zinc Yellow ORDER CODE

SIZE: DIAMETER X LENGTH

1CCT1Y07.5040 1CCT1Y07.5050 1CCT1Y07.5060 1CCT1Y07.5070 1CCT1Y07.5080 1CCT1Y07.5090 1CCT1Y07.5100 1CCT1Y07.5120 1CCT1Y07.5150 1CCT1Y07.5180

7.5 x 40mm 7.5 x 50mm 7.5 x 60mm 7.5 x 70mm 7.5 x 80mm 7.5 x 90mm 7.5 x 100mm 7.5 x 120mm 7.5 x 150mm 7.5 x 180mm

1.024

$/100 100 100 100 100 100 100 100 100 100 100

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

SYDNEY 1300 255 327


ORDER CODE

SIZE: DIAMETER X LENGTH

1CCT1C407.5050 1CCT1C407.5080

7.5 x 50mm 7.5 x 80mm

1: ANCHORS

1C.020 Concrete Screw Countersunk Head T-30 Torx Drive Class 4 $/100 100 100

1C.003 Metal Frame Anchor ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

Max. Fixture Thickness

1MMS10070 1MMS10090 1MMS10110 1MMS10130 1MMS10150 1MMS10180 1MMS10200

10 x 70mm 10 x 90mm 10 x 110mm 10 x 130mm 10 x 150mm 10 x 180mm 10 x 200mm

10mm 10mm 10mm 10mm 10mm 10mm 10mm

20mm 40mm 60mm 80mm 100mm 130mm 150mm

$/100 100 100 100 100 50 50 50

n/a n/a n/a n/a n/a n/a n/a

1C.005 Grey Nylon Plug ORDER CODE

SIZE: DIAMETER x LENGTH

DRILL DIAMETER

Screw Diameter

1FPGY05025 1FPGY06030 1FPGY07038 1FPGY08040 1FPGY10050 1FPGY12060

5 x 25mm 6 x 30mm 7 x 38mm 8 x 40mm 10 x 50mm 12 x 60mm

5mm 6mm 7mm 8mm 10mm 12mm

3-3.5mm 3.5-4mm 4.5-5.5mm 5-6mm 6-7.5mm 7.5-8mm

$/100 300 200 100 100 50 25

3000 2000 1000 1000 500 250

1C.006 PVC Star Plug Frame Packed / 25 Per Frame ORDER CODE

Length & Colour

DRILL DIAMETER

Screw Diameter

1PFWH25 1PFWH35 1PFRE25 1PFRE30 1PFRE35 1PFRE50 1PFGR25 1PFGR30 1PFGR35 1PFGR50 1PFBL25 1PFBL35 1PFBL50 1PFOR35 1PFOR50 1PFOR60

25mm White 35mm White 25mm Red 30mm Red 35mm Red 50mm Red 25mm Green 30mm Green 35mm Green 50mm Green 25mm Blue 35mm Blue 50mm Blue 35mm Orange 50mm Orange 60mm Orange

5mm 5mm 6mm 6mm 6mm 6mm 7mm 7mm 7mm 7mm 8mm 8mm 8mm 10mm 10mm 10mm

4-6g (3-3.5mm) 4-6g (3-3.5mm) 7-8g (4mm) 7-8g (4mm) 7-8g (4mm) 7-8g (4mm) 10-12g (5-5.5mm) 10-12g (5-5.5mm) 10-12g (5-5.5mm) 10-12g (5-5.5mm) 13-15g (6-7mm) 13-15g (6-7mm) 13-15g (6-7mm) 7-7.5mm 7-7.5mm 7-7.5mm

$/100 1000 1000 1000 1000 1000 1000 1000 1000 500 500 1000 500 500 500 400 400

e most h t e v a h e W ery flexible deTlrivy us! system Adelaide 08 8396 2781

1.025 © 2011 ALLFASTENERS


1: ANCHORS 1C.007 PVC Star Plug Hang Pack / 10 Per Pack ORDER CODE

Length & Colour

DRILL DIAMETER

Screw Diameter

1PHGY50 1PHGY60 1PHGY75

50mm Grey 60mm Grey 75mm Grey

12mm 12mm 12mm

20-24g 20-24g 20-24g

$/100 100 100 100

1C.008 Star Plastic Spaghetti Roll ORDER CODE

DIAMETER & Colour

DRILL DIAMETER

ROLL LENGTH

Screw Diameter

1SSRE55/10 1SSRE55/5 1SSGR65/50 1SSRE55/50

5.5mm Red 5.5mm Red 6.5mm Green 5.5mm Red

5.5mm 5.5mm 6.5mm 5.5mm

10mtr 5mtr 50mtr 50mtr

6-8g (3.5-4mm) 6-8g (3.5-4mm) 10-12g (4.5-5mm) 6-8g (3.5-4mm)

$/100 1 1 1 1

10 10 10 10

1C.009 Powers® Plastic Spaghetti Roll ORDER CODE

DIAMETER & Colour

DRILL DIAMETER

ROLL LENGTH

Screw Diameter

1SPGR05/50 1SPRE05.5/50

5.0mm Green 5.5mm Red

5.5mm 6mm

50mtr 50mtr

4-6g (3-3.5mm) 6-8g (3.5-4mm)

$/100 1 1

10 10

1C.010 Ramset™ Plastic Plug Roll ORDER CODE

DIAMETER & Colour

DRILL DIAMETER

ROLL LENGTH

Screw Diameter

1/720115 1/720122 1/720139

6.0mm Red 7.0mm Green 8.0mm Blue

6mm 7mm 8mm

100mtr 100mtr 100mtr

8-9g 10-12g 14-16g

$/100 1 1 1

1 1 1

See the NEW Wall-Dog in this section, page 1.030 1C.011 Ramset™ Plastic Spaghetti Roll ORDER CODE

DIAMETER & Colour

DRILL DIAMETER

ROLL LENGTH

Screw Diameter

1SROR05/50

5.0mm Orange

5mm

50mtr

6-8g (2.5-4mm)

Full range of Masonary Drill Bits available. See Drilling section, page 8.099

1.026

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 1

10


ORDER CODE

SIZE: DIAMETER X LENGTH

DRILL DIAMETER

Max. Fixture Thickness

1NACY05025 1NACY05040 1NACY06.5025 1NACY06.5038 1NACY06.5050 1NACY06.5075

5 x 25mm 5 x 40mm 6.5 x 25mm 6.5 x 38mm 6.5 x 50mm 6.5 x 75mm

5mm 5mm 6.5mm 6.5mm 6.5mm 6.5mm

6.5mm 13mm 6.5mm 19mm 32mm 50mm

1: ANCHORS

1C.012 Nylon Nail-In Anchor Countersunk Head $/100 100 100 100 100 100 50

5000 5000 5000 5000 5000 2500

1C.013 Nylon Nail-In Anchor Round Head ORDER CODE

SIZE: DIAMETER X LENGTH

DRILL DIAMETER

Max. Fixture Thickness

1NARY05025 1NARY05040 1NARY06.5025 1NARY06.5038 1NARY06.5050 1NARY06.5075

5 x 25mm 5 x 40mm 6.5 x 25mm 6.5 x 38mm 6.5 x 50mm 6.5 x 75mm

5mm 5mm 6.5mm 6.5mm 6.5mm 6.5mm

6.5mm 19mm 6.5mm 19mm 32mm 50mm

$/100 100 100 100 100 100 100

5000 5000 5000 5000 5000 2000

For Heavy Duty Nylon Anchors, use Mungo MNA Hammer Screw - see this section, page 1.020 1C.014 Nylon Nail-In Anchor Mushroom Head ORDER CODE

SIZE: DIAMETER X LENGTH

DRILL DIAMETER

Max. Fixture Thickness

1NAMY05019 1NAMY05025 1NAMY05040 1NAMY06.5025 1NAMY06.5038 1NAMY06.5050 1NAMY06.5075 1NAMY06.5100

5 x 19mm 5 x 25mm 5 x 40mm 6.5 x 25mm 6.5 x 38mm 6.5 x 50mm 6.5 x 75mm 6.5 x 100mm

5mm 5mm 5mm 6.5mm 6.5mm 6.5mm 6.5mm 6.5mm

3mm 6.5mm 5mm 6.5mm 19mm 32mm 50mm 75mm

$/100 100 100 100 100 100 100 50 50

10000 5000 5000 5000 5000 5000 2500 1000

1C.015 Nylon Nail-In Anchor Stainless Steel Pin Round Head ORDER CODE

SIZE: DIAMETER X LENGTH

DRILL DIAMETER

Max. Fixture Thickness

1NARS05025 1NARS06.5025 1NARS06.5038

5 x 25mm 6.5 x 25mm 6.5 x 38mm

5mm 6.5mm 6.5mm

6.5mm 6.5mm 19mm

$/100 100 100 100

1000 1000 1000

1C.016 Nylon Nail-In Anchor Stainless Steel Pin Mushroom Head ORDER CODE

SIZE: DIAMETER X LENGTH

DRILL DIAMETER

Max. Fixture Thickness

1NAMS05025 1NAMS06.5025

5 x 25mm 6.5 x 25mm

5mm 6.5mm

6.5mm 6.5mm

$/100 100 100

1000 1000

Adelaide 08 8396 2781

1.027 © 2011 ALLFASTENERS


1: ANCHORS Zamac HAMMER-SCREW® - is a unique, one-step drive anchor featuring a No.2 Phillips type head and a screw thread for use in concrete, block, brick or stone. With a body formed from corrosion resistant Zamac 7 alloy and a carbon steel drive screw, this anchor has been developed by Powers® as an improvement over standard Nail-in anchors. Traditionally, Zamac Nail-in anchors have been used for light duty, non-engineered applications and have not been recommended for use overhead. In order to overcome these problems, the Zamac HAMMER-SCREW® has been designed to provide a removable anchor with 40% higher tension load capacities when installed in concrete.

1C.017 Zamac Hammer Screw® ORDER CODE

SIZE: DIAMETER X LENGTH

DRILL DIAMETER

Max. Fixture Thickness

1ZHSA06.5025 1ZHSA06.5032 1ZHSA06.5038 1ZHSA06.5050 1ZHSA06.5075

6.5 x 25mm 6.5 x 32mm 6.5 x 38mm 6.5 x 50mm 6.5 x 75mm

6.5mm 6.5mm 6.5mm 6.5mm 6.5mm

10mm 13mm 22mm 28mm 35mm

$/100 100 100 100 100 100

500 500 500 500 500

1C.018 Metal Pin Anchor ORDER CODE

SIZE: DIAMETER X LENGTH

DRILL DIAMETER

Max. Fixture Thickness

1MPA05022 1MPA06.5020 1MPA06.5025 1MPA06.5032 1MPA06.5038 1MPA06.5050

5 x 22mm 6.5 x 20mm 6.5 x 25mm 6.5 x 32mm 6.5 x 38mm 6.5 x 50mm

5mm 6.5mm 6.5mm 6.5mm 6.5mm 6.5mm

6.5mm 6.5mm 10mm 13mm 22mm 28mm

$/100 100 100 100 100 100 100

500 500 500 500 500 500

Powers® Wall-Dog - is the first all steel one-piece screw anchor, which features high-profile threads for easy fixing into wallboard, plasterboard, plywood, concrete, hollow or grout filled block, brick, hard plaster. It has deep cutting, corkscrewlike threads providing smooth entry and a powerful hold, and when removed, it leaves a smaller hole than toggles, etc. For fastening into wallboard or wood, no pre-drilling is required. They are ideal for light to medium duty anchoring. Use for shelving to concrete, wall fixtures to plaster, electrical boxes to brick, and many other applications. Free Square Driver supplied in each pack of Square Drive Wall-Dogs.

1C.019 Powers® Wall-Dog Universal Anchor Pan Head ORDER CODE

LENGTH & DRIVE

DRILL DIAMETER

Embedment Depth

1WDPPC4032 1WDPPZ032 1WDPQC4032 1WDPQC4050 1WDPQZ032 1WDPQZ050

32mm Phillips Drive 32mm Phillips Drive 32mm Square Drive 50mm Square Drive 32mm Square Drive 50mm Square Drive

5mm 5mm 5mm 5mm 5mm 5mm

20mm 20mm 20mm 20mm 20mm 20mm

$/100 100 100 100 100 100 100

2000 2000 1000 1000 1000 1000

1C.021 Powers Picture Puppy ORDER CODE

SIZE

Drill Diameter

Embedment Depth

1C/02318

30mm

5mm

25mm

1.028

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 10

500


ORDER CODE

SIZE: DIAMETER X LENGTH

DRILL DIAMETER

Max. Fixture Thickness

1STRH03050 1STRH03075 1STRH05050 1STRH05075 1STRH05100 1STRH06075

1/8 x 2” 1/8 x 3” 3/16 x 2” 3/16 x 3” 3/16 x 4” 1/4 x 3”

10mm 10mm 13mm 13mm 13mm 20mm

30mm 50mm 24mm 50mm 74mm 50mm

1: ANCHORS

1D.001 Spring Toggle Round Head Yellow Passivated $/100 50 50 50 50 50 100

500 500 500 500 500 1000

1D.002 Spring Toggle Countersunk Head Yellow Passivated ORDER CODE

SIZE: DIAMETER X LENGTH

DRILL DIAMETER

Max. Fixture Thickness

1STCH05075 1STCH05100

3/16 x 3” 3/16 x 4”

13mm 13mm

50mm 74mm

$/100 50 50

500 500

1D.003 Spring Toggle Head Only Yellow Passivated ORDER CODE

THREAD SIZE

DRILL DIAMETER

Max. Fixture Thickness

1STHE03 1STHE05

1/8” 3/16”

10mm 13mm

n/a n/a

$/100 100 100

1000 1000

1D.004 Spring Toggle Cup Hook Head Yellow Passivated ORDER CODE

Diameter x Length/ Description

DRILL DIAMETER

Max. Fixture Thickness

1STCU05075 1STCU05075WH

3/16 x 3” 3/16 x 3” White Hook

14mm 14mm

50mm 50mm

$/100 100 100

1000 1000

1D.005 Spring Toggle Square Hook Head Zinc Silver ORDER CODE

SIZE: DIAMETER X LENGTH

DRILL DIAMETER

Max. Fixture Thickness

1STSQ05075

3/16 x 3”

14mm

50mm

$/100 100

1000

Fasteni?ngWe problemssolution have the NOW! CALL Adelaide 08 8396 2781

1.029 © 2011 ALLFASTENERS


1: ANCHORS 1D.006 Gravity Toggle Round Head Yellow Passivated ORDER CODE

SIZE: DIAMETER X LENGTH

DRILL DIAMETER

Max. Fixture Thickness

1GTRH03050 1GTRH05050 1GTRH05075

1/8 x 2” 3/16 x 2” 3/16 x 3”

10mm 11mm 11mm

30mm 24mm 50mm

$/100 100 100 100

1000 1000 1000

1D.007 Gravity Toggle Head Only Yellow Passivated ORDER CODE

THREAD SIZE

DRILL DIAMETER

1GTHE05

3/16”

14mm

$/100 100

1000

1D.008 Hollow Wall Anchor ORDER CODE

WALL THICKNESS

DRILL DIAMETER

SCREW THREAD SIZE

1HWA4XS 1HWA4S 1HWA4SL 1HWA4L 1HWA4XL 1HWA6S 1HWA8S

4-5mm 10-12mm 3-16mm 16-24mm 32-36mm 10-16mm 10-12mm

8mm 8mm 8mm 8mm 8mm 10mm 11mm

1/8” 1/8” 1/8” 1/8” 1/8” 3/16” 1/4”

$/100 100 100 100 100 50 50 50

500 500 1000 500 250 250 250

1D.009 Hollow Wall Anchor Hammer Drive Type ORDER CODE

WALL THICKNESS

DRILL DIAMETER

SCREW THREAD SIZE

1HWA4SD

10-12mm

8mm

1/8”

$/100 100

500

1D.010 Hollow Wall Anchor Crown Type ORDER CODE

WALL THICKNESS

DRILL DIAMETER

SCREW THREAD SIZE

1/09410

3-10mm

6.5mm

4mm

$/100 100

4000

For Hollow Wall Anchor Setting Tools, see Hand Tools section, page 12.005

The Zip-Toggle® is a hollow gypsum wallboard anchor designed to provide superior performance without the need to pre-drill large diameter holes. It is supplied packed with its own 6g x 2” lubricated screw.

1D.011 Plastermate Zip-Toggle® ORDER CODE

DESCRIPTION

Screw Diameter

1PZTNY

Nylon (with Screws)

3.5mm (6g)

1.030

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

$/100 50

SYDNEY 1300 255 327

250


1: ANCHORS

Buildex Super Wall-Mate® - the Wall-Mate with the greatest holding power, features a wing toggle that anchors itself behind the plasterboard, increasing the pullout strength to a recommended 20kgs. Ideal for holding shelving, mirrors, curtain rods, coat racks and ceiling applications, such as lighting fixtures and hanging plants.

How To Use: 1. Place on the end of a Phillips head screwdriver or cordless drill. Lightly pierce the plasterboard and using firm pressure, screw in until head is tight against the facepaper. 2. Place the item to be fixed into place and insert the screw. 3. Turning the screw will engage the wing toggle. 4. Continue turning the screw until it is tight, this will ensure the toggle is firmly anchored behind the plasterboard.

1D.012 Buildex Super Wall-Mate® ORDER CODE

DESCRIPTION

Screw Diameter

1WBSME

Metal (with Screws) 20kg

6g

$/100 20

240

Buildex Wall-Mate® is a complete range of self-drilling plasterboard anchors which provide a strong and secure fixing point to plasterboard, without the need for pre-drilling or locating of studs. Available in zinc diecast and non-conductive nylon. Nylon 10kg Wall-Mate® is for medium duty applications around the home, up to 10kgs, e.g. bathroom & garage fixtures, mirrors & clocks. Metal 10kg Wall-Mate® is recommended for medium duty applications up to 10kgs, e.g. curtain rods, coat racks, paintings. Mini Metal 5kg Wall-Mate® is for light duty applications up to 5kgs, e.g. wall phones, smoke detectors, ideal for fixing into Masonite, cane-ite, thin plywood and composite office partitions where space is limited. Mini Nylon 5kg Wall-Mate® is for light duty applications up to 5kgs where space is limited, e.g. pictures, clocks, doorbells.

How To Use: 1. Place a Wall-Mate on the end of a Phillips head screwdriver. 2. Put point of Wall-Mate where the anchor is to be installed, and lightly pierce the plasterboard facepaper. Using firm pressure, screw Wall-Mate into the plasterboard until head is tight against the facepaper. 3. Choose a screw or hook suitable for the particular application. Attach the item to be fixed by driving the screw into the Wall-Mate.

1D.013 Buildex Wall-Mate® ORDER CODE

DESCRIPTION

Screw Diameter

1WBDME 1WBDNY 1WBMME 1WBMNY

Metal Drill Point 10kg Nylon Drill Point 10kg Mini Metal Drill Point 5kg Mini Nylon Drill Point 5kg

8g 8g 8g 8g

$/100 100 100 100 100

Mini Wall-Mate® 5kg

800 800 1200 1200 Wall-Mate® 10kg

Adelaide 08 8396 2781

1.031 © 2011 ALLFASTENERS


1: ANCHORS The Zip-it® anchor is a one piece self drilling anchor designed for use in hollow gypsum wallboard for light duty loads. It is available in both engineered nylon and Zamac alloy for use with either a 6 or 8 gauge screws in 10mm to 25mm wallboard.

1D.014 Plastermate Zip-It® ORDER CODE 1PZIME 1PZINY 1PZDME 1PZDNY 1PZJME 1PZJNY

1 2 3 4 5 6

DESCRIPTION

Screw Diameter

Metal Open Point Nylon Open Point Metal Drill Point Nylon Drill Point Metal Junior Drill Point Nylon Junior Drill Point

3.5-4mm (6/8g) 3.5-4mm (6/8g) 3.5-4mm (6/8g) 3.5-4mm (6/8g) 3.5-4mm (6/8g) 3.5-4mm (6/8g)

4

$/100 100 100 100 100 100 100

1000 1000 1000 1000 1000 1000

3

2

6

1

5

1D.015 Butterfly Plastic Toggle ORDER CODE

WALL THICKNESS

DRILL Diameter

SCREW DIAMETER

1BPT12 1BPT19

4-12mm 15-19mm

8mm 8mm

6g 6g

$/100 100 100

1000 1000

1D.016 Slug Plug ORDER CODE

WALL THICKNESS

DRILL Diameter

SCREW DIAMETER

1SP310

3-10mm

8mm

6g

$/100 100

1000

Brilliant! The Strap-Toggle® is a pre-assembled anchor consisting of a carbon steel wing and a locking cap/ratchet leg assembly moulded from engineered plastic. When compared to traditional toggles, this unique anchor can be installed through a smaller hole and does not require a fixture or screw to set it. For a demonstration or more information on how to use this product, call our sales team.

1D.017 Strap-Toggle® ORDER CODE

Thread Size (UNC/BSW)

DRILL Diameter

Max. Wall Thickness

1/4052 1/4054 1/4056

3/16” 1/4” 3/8”

13mm 13mm 19mm

64mm 64mm 64mm

$/100 50 50 25

300 300 150

1D.018 Legs® Wallboard Anchor ORDER CODE

Description

SCREW Diameter

Wall Thickness

1LEGS

Wallboard Anchor

3.5-4mm

10mm

1.032

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 100

1000


ORDER CODE

Description/suits Wall Thickness

Drill Diameter

Screw Diameter

1PTMINI 1PT10 1PT12 1PT16

Mini 3mm Short 10-13mm Medium 13-16mm Long 16-20mm

8mm 8mm 8mm 8mm

3.5-5.5mm 3.5-5.5mm 3.5-5.5mm 3.5-5.5mm

1: ANCHORS

1D.019 Polly-Toggle $/100 100 100 100 100

1000 1000 1000 1000

1D.020 Scorpion Wall Plug ORDER CODE

Description

1SCORPWP

Wall Plug Contractor Pack 500 Screws/ Plugs+Drill Bit Tradesman Pack 200 Screws/ Plugs+Drill Bit

1SCORPWP-CP500 1SCORPWP-TP200

Drill Diameter

Screw Diameter

8mm

4mm (7g) 4mm (7g) x 50mm 4mm (7g) x 50mm

8.5mm 8.5mm

$/100 100

2000

500

n/a

200

n/a

1D.021 Anka Nylon Wall Plug ORDER CODE

Description

Screw Diameter

1A4/7 1A4/8 1A4 1A5

Red for Self Drilling Screws Green for Self Drilling Screws Orange for Wood Screws Orange for Wood Screws

3.5-4mm (6/8g) 4mm (7g) 4mm (8g) 4.8mm (10g)

$/100 100 100 100 100

1000 1000 1000 1000

The Rubber-Nut is a multi-purpose anchor for use in a variety of base materials ranging from plasterboard, hollow doors, and hollow building blocks. They can also be used in solid base materials. Where no “screw” is listed, none is supplied. If a length is listed, it is supplied with a Pan Head Metal Thread.

1D.022 Rubber-Nut ORDER CODE

Diameter x Length/Description

DRILL Diameter

Max. Wall Thickness

1RNS03024 1RN04011.5 1RNS04011.5 1RN04024 1RNS04024 1RN05014 1RNS05014 1RN05025 1RNS05025 1RN05040 1RNS05040 1RN06015 1RN06025 1RN06035 1RN08030 1RN08050 1RN10055 1RN12075

M3 x 24mm with 30mm Screw M4 x 11.5mm M4 x 11.5mm with 20mm Screw M4 x 24mm M4 x 24mm with 30mm Screw M5 x 14mm M5 x14mm with 20mm Screw M5 x 25mm M5 x 25mm with 30mm Screw M5 x 40mm M5 x 40mm with 50mm Screw M6 x 15mm M6 x 25mm M6 x 35mm M8 x 30mm M8 x 50mm M10 x 55mm M12 x 75mm

8mm 8mm 8mm 8mm 8mm 10mm 10mm 10mm 10mm 10mm 10mm 13mm 13mm 13mm 18mm 18mm 20mm 24mm

14mm 4mm 4mm 14mm 14mm 5mm 5mm 16mm 16mm 30mm 30mm 3mm 26mm 23mm 10mm 39mm 36mm 50mm

$/100 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 25 20

n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

1D.023 Powers Wall Claw Picture Hook Zinc Alloy ORDER CODE

SIZE

Max Load Capacity

1D/02319

32mm

10g

$/100 10

500

Adelaide 08 8396 2781

1.033 © 2011 ALLFASTENERS


1: ANCHORS ® THE HAMMER-IN ANCHOR SOLUTION FOR CONCRETE FASTDRIVE® has 100% contact with concrete. This creates compressive strength which provides superior holding power. MORE CONTACT = MORE HOLDING POWER

Why use FASTDRIVE® ? • FAST & SIMPLE INSTALLATION - Drill once and hammer in. • EASY INSTALLATION - No sideways movement when driving in. - No torquing required. • SUPERIOR PULLOUT & SAFETY FACTORS - Secure 100% contact = more holding power. • ECONOMICAL - Saves time and money. • USE IN PLACE OF OTHER FIXINGS - Sleeve Anchors, Metal Pin Anchors, Power Actuated fasteners, Plastic Plugs & Screws.

Applications: Most timber and steel to concrete applications, including: • Flooring • Stud Walls • Pipes and Clamps • Straps and Clips • Handrails

Technical Data:

30MPA Concrete

Embedment Depth (mm) 20 25 32

Ultimate Tension (kN) 5.4 7.4 10.6

Ultimate Shear (kN) 8.2 13.8 14.9

Installation Instructions:

5mm

1. Drill a 5mm diameter hole to the minimum recommended depth (see chart) and clean hole.

5mm

2. Insert FASTDRIVE® through material to be fastened and drive with a mash hammer until head is flush.

WARNING: Always wear safety goggles when installing.

1E.001 FASTDRIVE® Concrete Anchor ORDER CODE

SIZE: DIAMETER X LENGTH

DRILL Diameter

Min. Embedment

Max. Fixture Thickness

Clearance Hole/Head Diameter

1FD05030 1FD05040 1FD05050 1FD05065 1FD05075 1FD05085 1FD05100

5 x 30mm 5 x 40mm 5 x 50mm 5 x 65mm 5 x 75mm 5 x 85mm 5 x 100mm

5mm 5mm 5mm 5mm 5mm 5mm 5mm

25mm 25mm 30mm 30mm 30mm 30mm 30mm

5mm 15mm 20mm 35mm 45mm 55mm 70mm

6.5mm/11mm 6.5mm/11mm 6.5mm/11mm 6.5mm/11mm 6.5mm/11mm 6.5mm/11mm 6.5mm/11mm

1.034

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 100 100 100 100 100 100 100

3200 2500 2000 2000 1500 1500 1500


1: ANCHORS

SPIKE® Anchor - Using a special manufacturing process, this anchor is formed with an “S” shaped configuration at the working end of the anchor to create an expansion mechanism. The pre-expanded mechanism is activated as the anchor is driven into the drilled hole and creates a spring type compression force against the walls of the hole.

1E.002 SPIKE® Mushroom Head Carbon Steel Zinc Clear ORDER CODE

SIZE: DIAMETER X LENGTH

DRILL Diameter

Max. Fixture Thickness

1MH53MM 1MH510MM 1MH56MM 1MH519MM 1MH653MM 1MH656MM 1MH6519MM 1MH6532MM 1MH6544MM 1MH6568MM 1MH382 1MH38212 1MH383 1MH384

5 x 25mm 5 x 32mm 5 x 38mm 5 x 50mm 6.5 x 25mm 6.5 x 38mm 6.5 x 50mm 6.5 x 63mm 6.5 x 75mm 6.5 x 102mm 3/8” x 2” 3/8” x 2-1/2” 3/8” x 3” 3/8” x 4”

5mm 5mm 5mm 5mm 6.5mm 6.5mm 6.5mm 6.5mm 6.5mm 6.5mm 10mm 10mm 10mm 10mm

3mm 10mm 6mm 19mm 3mm 6mm 19mm 32mm 44mm 68mm 6mm 19mm 32mm 57mm

$/100 100 100 100 100 100 100 100 100 100 100 25 25 25 25

1000 1000 1000 1000 1000 1000 1000 1000 1000 500 250 250 250 250

1E.003 SPIKE® Mushroom Head Grade 316 Stainless Steel ORDER CODE

SIZE: DIAMETER X LENGTH

DRILL Diameter

Max. Fixture Thickness

1MH53MMSS 1MH510MMSS 1MH56MMSS 1MH519MMSS 1MH656MMSS 1MH6519MMSS 1MH6532MMSS 1MH6544MMSS 1MH382SS 1MH383SS 1MH384SS 1MH385SS

5 x 25mm 5 x 32mm 5 x 38mm 5 x 50mm 6.5 x 38mm 6.5 x 50mm 6.5 x 63mm 6.5 x 75mm 3/8” x 2” 3/8” x 3” 3/8” x 4” 3/8” x 5”

5mm 5mm 5mm 5mm 6.5mm 6.5mm 6.5mm 6.5mm 10mm 10mm 10mm 10mm

3mm 10mm 6mm 19mm 6mm 19mm 32mm 44mm 6mm 32mm 57mm 82mm

$/100 100 100 100 100 100 100 100 100 25 25 25 25

1000 1000 1000 1000 1000 1000 1000 1000 250 250 250 250

Make an- call t investmesnervice! us for

1E.004 Pipe SPIKE® Carbon Steel Zinc Clear The Pipe SPIKE® is designed for the suspension of threaded rod for HVAC and other services where suspended rod is required. ORDER CODE

INTERNAL THREAD

DRILL Diameter

1PS56MM 1PS658MM 1PS6510MM

M6 M8 M10

5mm 6.5 or 7mm* 6.5 or 7mm*

$/100 100 100 100

1000 1000 1000

Vertigo™ Rod & Tie Wire Suspension System. For details, see Hardware section, page 11.054

Adelaide 08 8396 2781

1.035 © 2011 ALLFASTENERS


1: ANCHORS 1E.005 SPIKE® Countersunk Head Carbon Steel Zinc Clear ORDER CODE

SIZE: DIAMETER X LENGTH

DRILL Diameter

Max. Fixture Thickness

1CS565MM 1CS575MM 1CS5100MM 1CS6538MM 1CS6550MM 1CS6565MM 1CS6575MM 1CS65100MM

5 x 65mm 5 x 75mm 5 x 100mm 6.5 x 38mm 6.5 x 50mm 6.5 x 65mm 6.5 x 75mm 6.5 x 100mm

5mm 5mm 5mm 6.5mm 6.5mm 6.5mm 6.5mm 6.5mm

33mm 43mm 68mm 6mm 18mm 33mm 43mm 68mm

$/100 100 100 100 100 100 100 100 100

1000 1000 1000 1000 1000 1000 1000 500

1E.006 SPIKE® Tie Wire Head Carbon Steel Zinc Clear The Tie Wire Head SPIKE® is ideal for hanging of wire for suspended ceilings and running catenary wire for electrical services. ORDER CODE

SIZE: DIAMETER X LENGTH

DRILL Diameter

EYE Diameter

1TW3700 1TW3759 1LTWS05085 1LTWS65060

5mm 6.5mm 5 x 85mm 6.5 x 60mm

5mm 6.5mm 5mm 6.5mm

5.5mm 7mm 5.5mm 7 x 7mm*

$/100 100 100 100 100

500 500 500 500

1E.007 Forming SPIKE® Carbon Steel Zinc Clear Forming SPIKE® is ideal for formwork applications - just drill and hammer in. It is designed with a collar that allows for correct setting and easy removal. The anchor is manufactured from high strength heat-treated material providing multiple usages.

ORDER CODE

SIZE: DIAMETER X LENGTH

DRILL Diameter

Max. Fixture Thickness

1FWS538MM 1FWS550MM 1FWS570MM 1FWS6570MM 1FWS65100MM

5 x 38mm 5 x 50mm 5 x 70mm 6.5 x 70mm 6.5 x 100mm

5mm 5mm 5mm 6.5mm 6.5mm

6mm 18mm 38mm 38mm 68mm

$/100 100 100 100 100 500

1000 1000 1000 1000 n/a

For Spike Setting Tools, see Hand Tools section, page 12.005

stop Your oneer- shop fasten

Vertigo™ Rod & Tie Wire Suspension System. For details, see Hardware section, page 11.054

1.036

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327


1: ANCHORS

The Chem-Stud® anchor system consists of self contained two-part glass capsules and matching chisel pointed anchor rods which are installed using a rotary hammer drill and rod adaptors. The Chem-Stud® adhesive is an ester based resin material packaged in single use glass capsules. These are designed for use in the installation of M8 through M24 threaded rod in solid concrete and masonary materials. It can also be used for reinforcing bars.

1F.001 Chem-Stud® Chemical Capsule Anchor ORDER CODE

Capsule/Stud Size

DRILL Diameter

Embedment Depth

Max. Fixture Thickness

1KEM8 1KEM10 1KEM12 1KEM16 1KEM20 1KEM24

8mm/M8 Stud 10mm/M10 Stud 12mm/M12 Stud 16mm/M16 Stud 20mm/M20 Stud 24mm/M24 Stud

10mm 12mm 14mm 18mm 24mm 28mm

80mm 90mm 110mm 125mm 170mm 210mm

17mm 28mm 36mm 42mm 72mm 66mm

$/100 10 10 10 10 5 5

500 500 200 200 50 50

The Hammer-Capsule® system consists of a self contained, single use, two-part glass capsule into which threaded anchor rod or reinforcing bars can be directly driven without the need for a chisel point or spinning action. It is designed for use in the installation of threaded rod or reinforcing bar in solid concrete and masonary materials.

1F.002 Hammer-Capsule® Chemical Capsule Anchor ORDER CODE

Capsule Size

DRILL Diameter

Embedment Depth

Max. Fixture Thickness

1HKEM10 1HKEM12 1HKEM16 1HKEM20 1HKEM24

10mm 12mm 16mm 20mm 24mm

12mm 14mm 18mm 24mm 28mm

95mm 120mm 135mm 150mm 220mm

28mm 36mm 42mm 72mm 66mm

$/100 10 10 10 5 5

500 200 100 50 50

1F.003 C  apsule Stud Chisel Point Int. Hex Drive Carbon Steel Yellow Passivated + Hex Nut & Flat Washer ORDER CODE

SIZE: THREAD X LENGTH

DRILL Diameter

Embedment Depth

Max. Fixture Thickness

1SCMY08110 1SCMY10130 1SCMY12160 1SCMY16190 1SCMY20260 1SCMY24300

M8 x 110mm M10 x 130mm M12 x 160mm M16 x 190mm M20 x 260mm M24 x 300mm

10mm 12mm 14mm 18mm 24mm 28mm

80mm 90mm 110mm 125mm 170mm 210mm

17mm 28mm 36mm 42mm 72mm 66mm

$/100 10 10 10 10 5 5

200 200 100 50 25 20

1F.004 C  apsule Stud Chisel Point Grade 316 Stainless Steel + Hex Nut & Flat Washer ORDER CODE

SIZE: THREAD X LENGTH

DRILL Diameter

Embedment Depth

Max. Fixture Thickness

1SCMS08110 1SCMS10130 1SCMS12160 1SCMS16190 1SCMS20260 1SCMS24300

M8 x 110mm M10 x 130mm M12 x 160mm M16 x 190mm M20 x 260mm M24 x 300mm

10mm 12mm 14mm 18mm 24mm 28mm

80mm 90mm 110mm 125mm 170mm 210mm

17mm 28mm 36mm 42mm 72mm 66mm

$/100 10 10 10 10 5 5

n/a n/a n/a n/a n/a n/a

Adelaide 08 8396 2781

1.037 © 2011 ALLFASTENERS


1: ANCHORS 1F.005 C  apsule Stud Chisel Point Grade 316 Stainless Steel + Hex Nut & Flat Washer ORDER CODE

SIZE: THREAD X LENGTH

DRILL Diameter

Embedment Depth

Max. Fixture Thickness

1SCMG08110 1SCMG10130 1SCMG12160 1SCMG16190 1SCMG20260 1SCMG24300

M8 x 110mm M10 x 130mm M12 x 160mm M16 x 190mm M20 x 260mm M24 x 300mm

10mm 12mm 14mm 18mm 24mm 28mm

80mm 90mm 110mm 125mm 170mm 210mm

17mm 28mm 36mm 42mm 72mm 66mm

$/100 10 10 10 10 5 5

200 200 100 50 25 20

1F.006 C  apsule Stud Chisel Point Grade 316 Stainless Steel + Hex Nut & Flat Washer ORDER CODE

SIZE: THREAD X LENGTH

DRILL Diameter

Embedment Depth

Max. Fixture Thickness

1SFMY08110 1SFMY10130 1SFMY12160 1SFMY16190 1SFMY20260 1SFMY24300

M8 x 110mm M10 x 130mm M12 x 160mm M16 x 190mm M20 x 260mm M24 x 300mm

10mm 12mm 14mm 18mm 24mm 28mm

80mm 90mm 110mm 125mm 170mm 210mm

17mm 28mm 36mm 42mm 72mm 66mm

$/100 10 10 10 10 5 5

200 200 100 50 25 20

1F.007 Injection System Stud Flat Cut Carbon Steel Galvanised + Hex Nut & Flat Washer ORDER CODE

SIZE: THREAD X LENGTH

DRILL Diameter

Embedment Depth

Max. Fixture Thickness

1SFMG08110 1SFMG10130 1SFMG12160 1SFMG16190 1SFMG20260 1SFMG24300

M8 x 110mm M10 x 130mm M12 x 160mm M16 x 190mm M20 x 260mm M24 x 300mm

10mm 12mm 14mm 18mm 24mm 28mm

80mm 90mm 110mm 125mm 170mm 210mm

17mm 28mm 36mm 42mm 72mm 66mm

$/100 10 10 10 10 5 5

200 200 100 50 25 20

1F.008 H  ollow Brick Sieve Stud Flat Cut Carbon Steel Yellow Passivated + Hex Nut & Flat Washer ORDER CODE

SIZE: THREAD X LENGTH

DRILL Diameter

PSM Sieve Code

1SSMY10110 1SSMY12110 1SSMY16125

M10 x 110mm M12 x 110mm M16 x 125mm

15mm 15mm 20mm

1PSM101285 1PSM101285 1PSM1685

$/100 10 10 10

200 100 50

1F.009 H  ollow Brick Sieve Stud Flat Cut Carbon Steel Galvanised + Hex Nut & Flat Washer ORDER CODE

SIZE: THREAD X LENGTH

DRILL Diameter

PSM Sieve Code

1SSMG10110 1SSMG12110 1SSMG16125

M10 x 110mm M12 x 110mm M16 x 125mm

15mm 15mm 20mm

1PSM101285 1PSM101285 1PSM1685

1.038

MELBOURNE 03 9330 0555 Š 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 10 10 10

200 100 50

We sell service, solutions & savings


1: ANCHORS

A range of sieves designed to support adhesive during the curing process, preventing costly waste due to loss of adhesive in base material cavities. For applications in hollow base materials such as brick, block and hollow core concrete. The range of plastic and mesh sieves provide easy anchoring in any type of hollow base material. Mesh sieves only may be cut and crimped to suit base material configuration.

1F.010 P  lastic Sieve Sleeve (AC100PRO / KF2 / AC100e) ORDER CODE

Suits Stud Size/Sleeve Length

DRILL Diameter

Embedment Depth

1PSM850 1PSM101285 1PSM1012130 1PSM1685

8mm Stud/50mm 10 or 12mm Stud/85mm 10 or 12mm Stud/130mm 16mm Stud/85mm

12mm 15mm 15mm 20mm

50mm 85mm 130mm 85mm

$/100 10 10 10 10

100 100 100 100

1F.011 M  esh Sieve Sleeve ORDER CODE

SIZE: Diameter x Length

DRILL Diameter

STUD DIAMETER

1MS08085 1MS121000 1MS10095 1MS10200 1MS161000 1MS12095 1MS12200 1MS16200 1MS201000

11 x 85mm 11 x 1000mm 15 x 95mm 15 x 200mm 15 x 1000mm 17 x 95mm 17 x 200mm 21 x 200mm 21 x 1000mm

12mm 12mm 16mm 16mm 16mm 18mm 18mm 22mm 22mm

8mm 8mm 10mm 10mm 10/12mm 12mm 12mm 16mm 16mm

$/100 10 1 10 10 1 10 10 10 1

100 50 100 100 50 100 100 100 25

Length: 85-200mm

all the s y l n o t o N - the tool fixings cessories to and ac them too! fix

Length: 1mtr

1F.012 T  hreaded Rod Retaining Cap ORDER CODE

SIZE

DRILL Diameter

STUD DIAMETER

1RC08 1RC10 1RC12 1RC16 1RC20

8mm 10mm 12mm 16mm 20mm

10mm 12mm 14mm 18mm 24mm

8mm 10mm 12mm 16mm 20mm

$/100 10 10 10 10 10

100 100 100 100 100

For our range of Hole Cleaning Tools, see Hand Tools section, page 12.049-050 Complete range of Masonary Drill Bits available - See Drilling section, page 8.099 For extra Mixer Nozzles & Extensions, See Hand Tools section, page 12.051 Threaded Rod available for creating longer length studs. See Threaded section, page 6.147

Adelaide 08 8396 2781

1.039 Š 2011 ALLFASTENERS


1: ANCHORS 1F.013 P  ower-Fast速PRO Epoxy Injection System ORDER CODE

DESCRIPTION

$/100

1PFPPRO/385

385ml Cartridge + 2 Nozzles

1

10

1PFPPRO/585

585ml Cartridge + 2 Nozzles

1

10

AC100PRO速 - A new generation adhesive, providing high performance, rapid curing and easy extrusion. It is resistant to a wide range of chemicals and can be used in damp environments. Ideal for threaded rod and re-bar applications and is designed for both hollow and solid base materials.

1F.014 A  C100速PRO Injection System ORDER CODE

DESCRIPTION

$/100

1AC100PRO/385

385ml Cartridge + 2 Nozzles

1

10

1F.015 K  F2 Polyester Injection System ORDER CODE

DESCRIPTION

$/100

1KF2/420

420ml Cartridge + 2 Nozzles

1

10

1KF2/PRO-KIT

Kit - 3x380ml Cartridge, 1xTool, Blow Pump, 6xNozzles, 4xMetal Brushes, 5xPSM Sieves

1

10

1F.016 A  C100e Injection System Styrene Free ORDER CODE

DESCRIPTION

$/100

1AC100E/300

300ml Cartridge

1

10

1AC100E/PRO-KIT

Kit - 4x300ml Cartridge, 1xTool, Blow Pump, 10xNozzles, 4xMetal Brushes, 5xPSM Sieves

1

10

1F.019 V  12 Vinyl Ester Styrene-Free Injection System ORDER CODE

DESCRIPTION

1V12/420

420Ctg + 2 Nozzles

$/100 1

12

Complete range of Caulking & Chemical Dispensers - see Hand Tools section, page 12.050

1.040

MELBOURNE 03 9330 0555 息 2011 ALLFASTENERS

SYDNEY 1300 255 327


1: ANCHORS

Trak-It®

The revolutionary fastener for fixing metal track, lathing, cable ties, Stick-e® Accessories and more to steel, concrete, block, and brick. It’s safe and easy to use, and there’s no licensing required. For more information about Trak-It®, contact our sales team. We can arrange site visits for a demonstration and for technical assistance with your application.

1G.001 T  rak-It® ORDER CODE

DESCRIPTION

$/100

1/55020 1/55022 1/55024 1/55026 1/55026TS 1/55028 1/55080 1/55120 1/55135 1/55250 1/55257 1/55265

13mm Pin + Fuel Cell 19mm Pin + Fuel Cell 25mm Pin + Fuel Cell 32mm Pin + Fuel Cell 32mm Twist Shank Breakfree Pin + Fuel Cell 38mm Pin + Fuel Cell 19mm Breakfree Pin + Fuel Cell 20mm C4 Pin+Fuel Cell 35mm C4 Pin+Fuel Cell 50mm C4 Pin+Fuel Cell 57mm C4 Pin+Fuel Cell 65mm C4 Pin+Fuel Cell

1000 1000 1000 1000 1000 1000 1000 500 500 500 500 500

5000 5000 5000 5000 5000 5000 5000 2500 2500 2500 2500 2500

For Stick-E Trak-It® Accessories, see Hardware section, page 11.056 For Trak-It® Tools, see Power Tools section, page 13.001 For Gas Framing & Fixing Nails, see Collated Nails section, page 4.047 1G.002 .300 Drive Pin Low Velocity ORDER CODE

PIN LENGTH

HEAD Diameter

Max. Fixture Thickness to Steel

Max. Fixture Thickness to Concrete

1D8LK014 1D8LK016 1D8LK019 1D8LV019 1D8LV022 1D8LV025 1D8LV030 1D8LV032 1D8LV035 1D8LV038 1D8LV040 1D8LV042 1D8LV045 1D8LV050 1D8LV057 1D8LV060 1D8LV065 1D8LV070 1D8LV075 1D8LV090 1D8LV100

14mm Knurled 16mm Knurled 19mm Knurled 19mm 22mm 25mm 30mm 32mm 35mm 38mm 40mm 42mm 45mm 50mm 57mm 60mm 65mm 70mm 75mm 90mm 100mm

8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm

1mm 2mm 3mm 8mm 10mm 12mm 20mm 20mm 25mm 25mm 32mm 32mm 32mm 35mm 45mm 48mm 50mm 55mm 65mm n/a n/a

n/a n/a n/a 2mm 2mm 2mm 7mm 7mm 12mm 12mm 22mm 22mm 22mm 25mm 35mm 40mm 45mm 48mm 50mm 65mm 76mm

$/100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

1000 5000 5000 5000 5000 5000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000

Adelaide 08 8396 2781

1.041 © 2011 ALLFASTENERS


1: ANCHORS 1G.017 .300 Drive Pin Ballistic Point ORDER CODE

PIN LENGTH

Head Diameter

Max. Fixture Thickness to Steel

Max. Fixture Thickness to Concrete

1D8BP050 1D8BP060 1D8BP075

50mm 60mm 75mm

8mm 8mm 8mm

8mm 8mm 8mm

2mm 2mm 2mm

$/100 100 100 100

5000 5000 5000

1G.003 .300 Drive Pin Low Velocity with Top Hat ORDER CODE

PIN LENGTH

HEAD Diameter

SHANK DIAMETER

1D8TK016 1D8TH019 1D8TH025

16mm Knurled 19mm 25mm

8mm 8mm 8mm

3.7mm 3.7mm 3.7mm

$/100 100 100 100

5000 5000 5000

.300 Drive Pin To suit: Powers Tools: PA3500, P35S, P7200, P2200, PA351. Hilti Tools: DX36M, DX350, DX600N, DXA40, DXA41, DX460. Ramset™ Tools: TS60P, TS750P, TS750, D200, D90, D60, JP50, JP88, 575A, E45, FORM MASTER™, JOB MASTER™, FRAME MASTER™, FIX MASTER™, TY MASTER™. Reid Tools: EXP360, EXP75. Drive pins with a .300 diameter head are designed for permanently fastening a fixture to concrete, some types of concrete block, and structural steel. For most applications, time consuming layout or hole spotting is eliminated both in the fixture and the base material resulting in faster installation and reduced costs. The pins are formed with a 0.300”(7.6mm) diameter head on one end, a 0.145”(3.7mm) diameter shank in various lengths, and a specially designed point to allow proper penetration into the base material. Knurled shank designs are available to increase performance in steel base materials. To provide optimum performance, a radius is formed below the head to prevent breakage during installation. A plastic flute is mounted over the point to retain the drive pin in the muzzle bushing or fastener guide of the tool and to provide guidance during the driving operation.

1G.004 .300 Drive Pin Low Velocity Washered To provide resistance to pullover, these pins are available with a pre-assembled 14 gauge (1.9mm) metal washers. Resistance to pullover is increased by the additional bearing surface provided by the washer. ORDER CODE

PIN LENGTH

HEAD Diameter

SHANK DIAMETER

WASHER DIAMETER

1D8LW025 1D8LW032 1D8LW038

25mm 32mm 38mm

8mm 8mm 8mm

3.7mm 3.7mm 3.7mm

22mm (7/8”) 22mm (7/8”) 22mm (7/8”)

$/100 100 100 100

1000 1000 1000

1G.005 .300 Drive Pin Low Velocity Washered with Top Hat ORDER CODE

PIN LENGTH

HEAD Diameter

SHANK DIAMETER

WASHER DIAMETER

1D8TW020 1D8TW025 1D8TW030

20mm 25mm 30mm

8mm 8mm 8mm

3.7mm 3.7mm 3.7mm

22mm (7/8”) 22mm (7/8”) 22mm (7/8”)

1.042

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 100 100 100

1000 1000 1000


ORDER CODE

PIN LENGTH

HEAD Diameter

SHANK DIAMETER

WASHER SIZE

1D8IW038 1D8IW065

38mm 65mm

8mm 8mm

3.7mm 3.7mm

36 x 0.9mm 36 x 0.9mm

1: ANCHORS

1G.006 .300 Drive Pin Low Velocity with Insulation Washer $/100 100 50

1000 500

1G.019 52mm Drive Pin with Insulation Washer ORDER CODE

PIN LENGTH

HEAD Diameter

Shank Diameter

WASHER SIZE

1D8IWF040 1D8IWF050 1D8IWF075

52mm 52mm 52mm

8mm 8mm 8mm

40mm 50mm 75mm

60mm 60mm 60mm

$/100 200 200 200

n/a n/a n/a

1G.007 .300 Drive Pin Low Velocity with Angle Clip ORDER CODE

PIN LENGTH

HEAD Diameter

SHANK DIAMETER

CLIP LEG LENGTH

1D8AC025 1D8AC032

25mm 32mm

8mm 8mm

3.7mm 3.7mm

20mm 20mm

$/100 100 100

1000 1000

1G.018 Ceiling Clip ORDER CODE

DESCRIPTION

1/50400

No Pin 7mm - 8mm Holes

$/100 100

the mosyt e v a h e W le deliver flexib - Try us! systen

1000

1G.008 .300 Drive Pin Low Velocity with Cable Tie ORDER CODE

PIN LENGTH

HEAD Diameter

SHANK DIAMETER

CABLE TIE LENGTH

1D8CT24032

32mm

8mm

3.7mm

240mm

$/100 100

500

1G.009 .300 Drive Pin Low Velocity with Conduit Clip ORDER CODE

PIN LENGTH

HEAD Diameter

SHANK DIAMETER

CLIP INTERNAL DIAMETER

1D8CC12025 1D8CC19025 1D8CC25025

25mm 25mm 25mm

8mm 8mm 8mm

3.7mm 3.7mm 3.7mm

1/2” 3/4” 1”

$/100 100 100 25

1000 1000 250

Adelaide 08 8396 2781

1.043 © 2011 ALLFASTENERS


1: ANCHORS 1G.020 PA Rod Hanger ORDER CODE

PIN LENGTH

HEAD Diameter

Shank Diameter

1D8IWF040

27mm

8mm

3.7mm

$/100 50

600

1G.010 1  /4” Drive Pin High Velocity To Suit: Ramset™ Tools: J10, J20, J20S. Powers Tools: PAT660. Reid Tools: EXP660, OMARK330.

ORDER CODE

PIN LENGTH

HEAD Diameter

SHANK DIAMETER

1D6HV025 1D6HV030 1D6HV040 1D6HV050 1D6HV065 1D6HV075 1D6HV090 1D6HV100

25mm 30mm 40mm 50mm 65mm 75mm 90mm 100mm

1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

3.7mm 3.7mm 3.7mm 3.7mm 3.7mm 3.7mm 3.7mm 3.7mm

$/100 100 100 100 100 100 100 100 100

1000 1000 1000 1000 1000 1000 1000 1000

ite Full ons-esrvice testingilable ava

1G.011 NK Series Drive Pin To Suit: Hilti Tools: DX450. Reid Tools: EXP450.

ORDER CODE

PIN LENGTH

HEAD Diameter

SHANK DIAMETER

1D5NK019 1D5NK022 1D5NK027 1D5NK032 1D5NK037 1D5NK042 1D5NK047 1D5NK052 1D5NK062 1D5NK072 1D5NK082 1D5NK092

19mm 22mm 27mm 32mm 37mm 42mm 47mm 52mm 62mm 72mm 82mm 92mm

5.6mm 5.6mm 5.6mm 5.6mm 5.6mm 5.6mm 5.6mm 5.6mm 5.6mm 5.6mm 5.6mm 5.6mm

3.7mm 3.7mm 3.7mm 3.7mm 3.7mm 3.7mm 3.7mm 3.7mm 3.7mm 3.7mm 3.7mm 3.7mm

$/100 100 100 100 100 100 100 100 100 100 100 100 100

1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000

For Explosive PA Tools, see Power Tools section, page 13.001 1G.012 .300 Drive Pin Low Velocity Collated To Suit: Hilti Tools: DXA40, DXA41, DX36M, DX351, DX460. Powers Tools: PA351.

ORDER CODE

PIN LENGTH

HEAD Diameter

SHANK DIAMETER

1D8LC016 1D8LC019 1D8LC022 1D8LC027 1D8LC032 1D8LC037 1D8LC042 1D8LC052 1D8LC062 1D8LC072

16mm 19mm 22mm 27mm 32mm 37mm 42mm 52mm 62mm 72mm

8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm

3.8mm 3.8mm 3.8mm 3.8mm 3.8mm 3.8mm 3.8mm 3.8mm 3.8mm 3.8mm

1.044

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

$/100 100 100 100 100 100 100 100 100 100 100

SYDNEY 1300 255 327

1000 1000 1000 1000 1000 1000 1000 1000 1000 1000


1: ANCHORS

1G.013 0.25 Caliber Disk Load To Suit: Ramset™ Tools: D60, D90, D200. ORDER CODE

COLOUR

1/DL0.25YE 1/DL0.25RE 1/DL0.25GR

Yellow Red Green

$/100 100 100 100

1000 1000 1000

1G.014 0.27 Caliber Safety Load Strip/10 To Suit:

Powers Tools: PA3500, R3500, PA351. Hilti Tools: DX36M, DX350, DXA40, DXA41, DX450, DX460, DX351. Ramset™ Tools: TS60P, TS750P, TS750, S75A, FORM MASTER™, FRAME MASTER™, FIX MASTER™, TY MASTER™. Reid Tools: EXP360, EXP75, EXP460, BET0200.

ORDER CODE

COLOUR

1/SL0.27BK 1/SL0.27GR 1/SL0.27PR 1/SL0.27RE 1/SL0.27YE

Black (for Hilti DX450 only) Green Purple Red Yellow

$/100 100 100 100 100 100

1000 1000 1000 1000 1000

1G.015 0.22 Caliber “A” Low Velocity Load To Suit: Ramset™ Tools: JP50, JP88, E45, J10. Powers Tools: P7200, P2200. Hilti Tools: DXE37, DXE72. ORDER CODE

COLOUR

1/AL0.22GR 1/AL0.22YE

Green Yellow

$/100 100 100

5000 5000

1G.016 0.22 Caliber Standard Velocity Load To Suit: Ramset™ Tools: J20, J20S. Powers Tools: PAT660. Reid Tools: EXP660.

ORDER CODE

COLOUR

1/LL0.22GR 1/LL0.22YE 1/LL0.22RE 1/LL0.22PU

Green Yellow Red Purple

$/100 100 100 100 100

5000 5000 10000 10000

Adelaide 08 8396 2781

1.045 © 2011 ALLFASTENERS



test