Issuu on Google+

Sealants, Adhesives, Paints, Cleaners & Lubricants SECTION 10

SEALANTS MELBOURNE 03 9330 0555

SYDNEY 1300 255 327

Adelaide 08 8396 2781


10: SEALANTS TABLES OF CONTENTS 10: SEALANTS, ADHESIVES, PAINTS, CLEANERS & LUBRICANTS

PAGE

10A: Sealers

10.003

10B: Adhesives

10.015

10C: Fillers & Grouts

10.025

10D: Curing Agents, Preparation Primers & Cleaning Agents

10.029

10E: Solvents, Product Cleaners & Aerosol Cleaners

10.031

10F: Bernzomatic® Fuels

10.037

10G: Polishing Compounds, Household Cleaners & Disinfectants

10.038

10H: Aerosol Paints

10.041

10I: Lubricants, Oil & Grease, Cutting Fluids & Compounds

10.044

10J: Loctite Range

10.053

10.002

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327


Silicone Sealants have excellent flexibility, moisture resistance and high temperature resistance. There are many Silicone Sealants to choose from - generally they fall into two categories: Acetic Cure and Neutral Cure. Silicones cure (change from a paste to a rubber) by reacting with moisture in the air - when this happens a by-product is released.

Acetic Cure The by-product released when an Acetic Cure Silicone cures is acetic acid, which smells like vinegar. Acetic cure silicones are limited to use on certain materials because of the acid. These silicones should not be used on concrete/masonary products or galvanised or soft metals because the acid causes corrosion. Acetic cure silicones have excellent adhesion to glass - they are not prone to yellowing as the silicone gets old, and they skin a bit faster then Neutral Cure Silicones. Products: Generally - Window and Glass Silicones and some Bathroom Silicones.

Neutral Cure Neutral Cure Silicones are non-corrosive. The by-product released when a Neutral Cure Silicone cures is MEKO, which has an unusual odour. MEKO can become irritating to your skin with prolonged contact. Neutral cure silicones have no acid so they can be used on a wide variety of building materials without any problems. Neutral cure silicones have better adhesion to timber and most metals. They are very good multi-purpose silicones. Products: Generally - Roof and Gutter, Multi-purpose and some Bathroom Silicones.

Other differences between Silicones: Different additives can be used when making silicones to promote adhesion to specific surfaces. For wet/humid areas fungicides can be added to resist mould and mildew.

Please Note: brands shown or listed are not necessarily the brand supplied. As we constantly strive to supply the highest quality products and service, products may vary depending on availability of supply or if we decide to change to a higher quality product. Also note that amount of sealant (size - ml/gm, etc.) in a cartridge/sausage, etc , is an indicative quantity. Mostly, the size of the exterior packaging of the cartridge/sausage, is similar in all brands and types, but may contain different quantities of sealant.

SILICONE SEALANTS 10A.001 Silicone Sealant 705 General Purpose Neutral Cure Roof and Gutter, and Plumbers Sealant. All general purpose applications, including cladding, PVC plastic fittings, common building materials. Special formulation for sealing and weatherproofing sheet metal and aluminium roofing, flashing and guttering. Interior/ exterior, preferred by the trade. ColorbondÂŽ colours available - see below. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SNC300AL 10SNC300GY 10SNC300TR 10SNC600GY

Aluminium Grey Translucent Grey

300ml 300ml 300ml 600ml

$/100 20 20 20 20

Structural High Performance Silicone and Heat Resistant Sealant available to order. Contact our sales team for more information.

Adelaide 08 8396 2781

10.003 Š 2011 ALLFASTENERS

10: SEALANTS

GENERAL INFORMATION ON SILICONE SEALANTS


10: SEALANTS 10A.002 Silicone Sealant Plumbers/Roof & Gutter Neutral Cure Roof and Gutter, and Plumbers Sealant. All general purpose applications, including cladding, PVC plastic fittings, common building materials. Special formulation for sealing and weatherproofing sheet metal and aluminium roofing, flashing and guttering. Colorbond® colours are matched to Bluescope Colorbond® Steel. Interior/exterior, preferred by the trade. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SNC300AL 10SNC300CC 10SNC300CG 10SNC300DO 10SNC300GG 10SNC300MR 10SNC300NS 10SNC300PE 10SNC300PA 10SNC300BE 10SNC300SU 10SNC300WG

Aluminium Classic Cream Cottage Green Deep Ocean Galvanised Grey Manor Red Night Sky Pale Eucalypt Paperbark Stone/Beige Surfmist Woodland Grey

300ml 300ml 300ml 300ml 300ml 300ml 300ml 300ml 300ml 300ml 300ml 300ml

$/100 20 12 12 12 12 12 12 12 12 12 12 12

10A.003 Silicone Sealant 505 Glass, Metal & Masonary Neutral Cure Glazing, weather sealing, metal assembly, aluminium, concrete, masonary, galvanised iron, skylights, PVC plastic fittings. U.V. & Weather resistant. Interior/exterior, preferred by the trade. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SNG300TR 10SNG300GY 10SNG300BK 10SNG300MB 10SNG300WH 10SNG300SS 10SNG300BZ

Translucent Grey Black Matt Black White Sandstone Bronze

300ml 300ml 300ml 300ml 300ml 300ml 300ml

$/100 20 20 20 20 20 20 20

10A.004 S  ilicone Sealant 605 Bathroom, Kitchen & Laundry Mould Resistant Neutral Cure Sealing and weatherproofing wet areas - showers, bathrooms, laundries, kitchens. Use in areas of high humidity and heat - mould and mildew resistant. Not suitable for constant water immersion. Interior/exterior, preferred by the trade. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SNA300TR 10SNA300WH 10SNA300AI 10SNA300TG

Translucent White Almond Ivory Tile Grey

300ml 300ml 300ml 300ml

$/100 20 20 20 20

For manual Caulking Dispensers, see Hand Tools section, page 12.050 For Pneumatic & Cordless Caulking Dispensers, see Power Tools section 13

10.004

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327


10: SEALANTS

10A.006 Silicone Sealant 405 Window & Glass Acetic Cure Superior adhesion to window, glass, ceramic tiles and metals. Use on doors, windows, sealing curtain walls, glass block structures, skylights, aquariums up to 30 litres. Excellent U.V. and weather resistant. Interior/exterior, preferred by the trade. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SAG300TR 10SAG300BK 10SAG300WH

Translucent Black White

300ml 300ml 300ml

$/100 20 20 20

10A.007 Silicone Sealant 805 Bthrm/Kitchen/Laundry Mould Resist Acetic Cure Sealing and waterproofing wet areas - showers, bathrooms, laundries, kitchens. Ideal for ceramics, glass, laminates, aluminium. Mould & mildew resistant. Withstands temperature variations of -50ºC to +200ºC. Not suitable for constant water immersion. Interior/exterior, preferred by the trade. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SAA300TR 10SAA300WH

Translucent White

300ml 300ml

$/100 20 20

10A.008 Silicone Sealant 205 Brick & Concrete Neutral Cure Weatherproof Joint Sealant. Use on walls, patios, floors, masonary/stone blocks, ornaments. Interior/exterior, preferred by the trade. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SNM300GY

Translucent

300ml

$/100 12

10A.009 Silicone Sealant 105 Paint It Acetic Cure Water clean-up, weatherproof paintable Sealant. Use on large number of surfaces. Interior/exterior, preferred by the trade. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SNP300WH

White

300ml

$/100 12

10A.044 HBF 730 RTV Adhesive & Sealant Silicone HBF 730 industrial grade silicone is a multi purpose, one component RTV (Room Temperature Vulcanising) silicon used for industrial sealing and bonding. HBF 730 industrial grade silicone forms a tough rubber like film which outperforms standard grade silicones and is UV, vibration and temperature resistant. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SEHBF730300BK 10SEHBF730300CL

Black Translucent

300ml Ctg 300ml Ctg

$/100 12 12

10A.051 Liquid Glass MS Sealant Liquid Glass is a completely clear MS polymer designed for invisible bonding. Outstanding bond strength on nearly all surfaces, easy to tool and finish, free of solvents, isocyanates and other hazardous chemicals. Permanently paintable and flexible. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SNLG300CL

Crystal Clear

300ml Ctg

$/100 12

Adelaide 08 8396 2781

10.005 © 2011 ALLFASTENERS


10: SEALANTS 10A.052 High Performance Silicone HBF 660 is a high modulus, premium grade, neutral cure silicone sealant for a side range of industrial, glazing, cladding, automotive and assembly applications. HBF 660 has extra high body reducing the risk of slumping when used on sloping surfaces, ad exhibits superior adhesion on a wide range of surfaces. ORDER CODE

DESCRIPTION

COLOUR

PACK SIZE & TYPE

10SEHBF660300BK 10SEHBF660300TR 10SEHBF100300BK 10SEHBF100300GY 10SEHBF100300WH

High Modulus High Modulus Low Modulus Low Modulus Low Modulus

Black Translucsent Black Grey White

300ml Ctg 300ml Ctg 300ml Ctg 300ml Ctg 300ml Ctg

Acrylic & POLYURETHANE SEALANTS 10A.010 Silicone Easy Clear Paintable sealant - excellent adhesion. Suitable for wet surfaces. Crystal clear - when applied, it becomes almost invisible. Mould, mildew and weather resistant. Uses: sealing roofs and guttering, window frames, around shower screens, sinks and basins. Interior/ exterior, preferred by the trade. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SEE300CL 10SAE300CL 10SEUC300CL

Silicone Easy Clear Selleys Silicone All Clear Fuller Ultra Clear Sealant

300ml 300ml 300ml

$/100 6 6 6

10A.011 Polycarbonate Sealant Special sealant for sealing polycarbonate roofing, timber, glass, metal, roof tiles and most plastics. Applies as white - dries clear. Flexible, paintable, weatherproof and water clean-up. Interior/exterior, preferred by the trade. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SEU300WH

White (Dries Clear)

300ml

$/100 20

Pallet rates available on most products. Contact our sales team for more information.

10A.012 Sealant Acrylic EZseal Acrylic high performance building sealant. Use for timber joint sealing, timber window joints. Water clean-up. Preferred by the trade. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SEZ300BE 10SEZ300RT 10SEZ300TR

Beige Redwood Tan Translucent

300ml 300ml 300ml

$/100 20 20 20

10A.013 Rocor Water Resistant (WR) Sealant Flexible, water based acrylic latex joint sealant. For use in sealing junctions and cutouts in water resistant sheets and tiled areas - gaps between baths, basins, shower hobs and tiles, expansion joints in brickwork, sealing around architraves, window and door frames, and as a liquid grout for patching tile grouting. Interior/exterior use, paintable. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SEWR300WH

White

300ml

10.006

MELBOURNE 03 9330 0555 Š 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 20

$/100 12 12 12 12 12


10: SEALANTS

10A.014 Duct Sealant Water Based (WB) Fast setting, solvent based duct joint sealant. Use for flange sealing in high velocity airconditioning ducting, installed indoors. Preferred by the trade. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SEDW300GY

Grey

300ml

$/100 20

10A.015 Duct Sealant Solvent Based (SB) Fast setting, solvent based duct joint sealant. Use for flange sealing in high velocity airconditioning ducting, installed indoors. Preferred by the trade. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SEDS300GY

Grey

300ml

$/100 20

10A.016 Caulk In Colours™ Acrylic Sealant The premium, market leading, coloured acrylic building sealant. Coloured gap filler - for sealing gaps around skirting boards, window and door frames. Ideal for mending unsightly grout in most areas. Dries true to colour. Horizontal and vertical applications. Water clean up. Interior/exterior, preferred by the trade for over 20 years. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SEC300BK 10SEC300BW 10SEC300CE 10SEC300CM 10SEC300CR 10SEC300EA 10SEC300FA 10SEC300LG 10SEC300LI 10SEC300MK 10SEC300RW 10SEC300TC 10SEC300VA 10SEC300WA 10SEC300WH

Black Brilliant White Cedar Cream Charcoal Earth Fawn Light Grey Light Ivory Mocca Red Wood Terracotta Vanilla Warm Brown White

300ml 300ml 300ml 300ml 300ml 300ml 300ml 300ml 300ml 300ml 300ml 300ml 300ml 300ml 300ml

$/100 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

For Air & Battery operated Caulking Dispensers, see Power Tools section 13 For Hand Caulking Dispensers, see Hand Tools section, page 12.050 10A.017 AF Gapfilla Acrylic Gap Sealant Premium Gap Filler for filling/patching gaps and cracks, prior to painting. Use around cornices, architraves, window and door frames. Dries smooth, easier to paint over. Flexible, paintable, water clean-up. Interior/exterior, preferred by the trade. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SEG300WH

White

300ml

$/100 20

Adelaide 08 8396 2781

10.007 © 2011 ALLFASTENERS


10: SEALANTS 10A.018 Fire Rated Acoustic Sealant Single component, water clean up sealant - effective acoustic sealant. Fire rating of up to 4 hours, for gaps up to 50mm. Use on metal, concrete, plasterboard and cable coverings. Formulated primarily to perform as a barrier to the incursion of fire through expansion joints. Intumescent - expands when exposed to fire or heat above 90ºC. Good flexibility - joint movement -/+20%. Interior use, preferred by the trade. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SEF300GY 10SEF600GY 10SEFGY-10L

Grey Grey Grey

300ml Cartridge 600ml Sausage 10ltr Pail

$/100 20 15 1

10A.019 Fireban 1 Fire Rated Polyurethane Sealant Single component, low modulous polyurethane elastomeric gun grade join sealer. Fire rating of up to 4 hours, for gaps up to 50mm. Use for sealing joints in expansion and construction joints in precast, in insitu concrete, block and brick work, penetration and core hole sealing in conjunction with fire collars/pillows or in areas requiring intumescent sealing, and, sealing joints that require acoustic rating performance. Good flexibility - total joint movement 50% minimum. Non-staining, paintable, high durability and excellent weathering resistance. Exterior use, preferred by the trade. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SEF1600LS

Limestone

600ml Sausage

$/100 20

10A.020 Seal N Flex 1 Polyurethane Sealant Low modulus polyurethane sealant - flexible and paintable. Use for caulking joints in precast and insitu concrete, block and brick work, window and door perimeter sealing, external cladding, curtain walls, metal to metal sealing, metal fabrication, airconditioning ducting. Interior/Exterior use, preferred by the trade. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SEPU300GY 10SEPU600GY 10SEPU300WH 10SEPU600WH 10SEPU300BK 10SEPU600BK 10SEPU600BB 10SEPU600BZ 10SEPU600SS 10SEPU600RW 10SEPU600MD 10SEPU600CB 10SEPU600LS 10SEPU600OW 10SEPU600EG

Grey Grey White White Black Black Bahama Beige Bronze Sandstone Redwood Manilla Sand Classic Bone Limestone Off White Epping Grey

300ml Cartridge 600ml Sausage 300ml Cartridge 600ml Sausage 300ml Cartridge 600ml Sausage 600ml Sausage 600ml Sausage 600ml Sausage 600ml Sausage 600ml Sausage 600ml Sausage 600ml Sausage 600ml Sausage 600ml Sausage

$/100 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

Sausage Barrel Guns available. See Hand Tools section, page 12.050 For Foam Strips and Backer Rod, see Hardware section, page 11.010 10A.045 Max Bond™ Rapid Cure Polyurethane Adhesive Max Bond™ Rapid Cure is a rigid/hard set polyurethane for where strong, stress resistant bonding is required. Waterproof to D4 Classifications makes it suitable for exterior applications. Max Bond™ Rapid Cure needs only one hour clamping times in most conditions. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SEMXRC300WH

White

300ml Ctg

10.008

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 12


10: SEALANTS

10A.021 Bostik 5612 Sealant Cool room mastic sealer - non-hardening, non-skinning ORDER CODE

COLOUR

CARTRIDGE SIZE

10SEB12300GY 10SEB12300WH

Grey White

300ml 300ml

$/100 20 20

10A.022 Bostik 5614 Sealant General purpose mastic sealer - non-hardening, non-skinning. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SEB14300BK

Black

300ml

$/100 10

Cleaning Solvents available. See this section, page 10.031

10A.023 Bostik 5615 Sealant General purpose mastic sealer - non-hardening, non-skinning. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SEB15300BK

Black

300ml

$/100 10

AF = s! All Fastener

10A.024 Bostik 1128 Heat Transfer Sealant Oil based conductive sealant. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SEB1128300

n/a

300ml

$/100 10

For waterless hand & product Cleaning Towels, see this section, page 10.040

ADHESIVE SEALANTS 10A.025 Matrix FC Fast Cure Polyurethane Adhesive/Sealant Single component, high performance, polyurethane adhesive and sealant. Fast curing, non-sag - provides a flexible and durable seal. High bond strength, good chemical resistance, water resistant, paintable, sandable, excellent acoustic properties, resistant to fungal attack. Suitable for a wide range of industrial, automotive and marine applications - structural adhesive in bus, truck and vehicle assembly, marine craft, airconditioning, refrigeration, heavy shipping requiring sealing, etc. Interior/exterior use, preferred by the trade. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SEM300BK 10SEM300GY 10SEM300WH 10SEM600BK 10SEM600GY 10SEM600WH

Black Grey White Black Grey White

300ml Cartridge 300ml Cartridge 300ml Cartridge 600ml Sausage 600ml Sausage 600ml Sausage

$/100 20 20 20 20 20 20

Adelaide 08 8396 2781

10.009 Š 2011 ALLFASTENERS


10: SEALANTS 10A.026 Fuller Toolbox Adhesive/Sealant Revolutionary new Adhesive/Sealant: caulks, bonds and seals all in one step. Can be used for most interior/exterior applications: concrete, brick, block, metals, timber, tiles and mirrors, plumbing and roofing. High-tack adhesive - grabs fast first time, has high strength bond. Rapid skinning and curing, primerless adhesion to a wide range of surfaces. Odour-free, solvent-free, mildew resistant when cured, heat resistant to 100ºC, U.V. resistant, salt & chlorinated water resistant. High flexibility - can be used in areas of high foot traffic. Can be painted over with latex or oil based paints - cleans up easily with damp cloth. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SETB300GY 10SETB300WH 10SETB300BK

Grey White Black

300ml 300ml 300ml

$/100 12 12 12

10A.027 Fulaprene 303 Building Adhesive/Sealant Dries to form a tough water and air tight seal. Bonds and seals aluminium, treated and untreated metals, most rigid plastics and fibreglass. Salt and chlorinated water resistant. Use with PVC angle flashing in wet areas. Paintable. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SE3300GY

Grey

300ml

$/100 20

10A.028 Max Seal™ Adhesive/Sealant High performance sealant combining high flexibility with strong adhesion. Use to seal around doors, windows and skylights. Especially suited for use with EPDM solar heating collector tubes. Skins rapidly to reduce the chance of foreign matter settling in sealant. Dries clear. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SET3300CL

Clear

300ml

$/100 20

10A.029 Simson ISR 70-03 SMP Adhesive/Sealant Universal ‘Silyl Modified Polymer’ (SMP) construction adhesive/sealant. Use for bonding and sealing in structural elastic joints in truck, bus, caravan and train construction, sunroof systems, bus roofs, sealing of welded seams. Grey colour is made to order only, minimum order of 720. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SESIO3290BK 10SESIO3290GY 10SESIO3290WH 10SESIO3600BK 10SESIO3600GY 10SESIO3600WH

Black Grey White Black Grey White

290ml Cartridge 290ml Cartridge 290ml Cartridge 600ml Sausage 600ml Sausage 600ml Sausage

$/100 12 12 12 12 12 12

Full on-siteice testing serlve availab 10.010

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327


10: SEALANTS

10A.030 Simson ISR 70-05 SMP Adhesive/Sealant High green and tensile strength ‘Silyl Modified Polymer’ (SMP) construction adhesive/ sealant. Use for bonding/sealing in structural elastic joints in truck, bus, caravan and train construction, bonding of roofs, corner profiles of aluminium or polyester on trailers, polyester parts on metal frames and floor systems. Grey and black (sausages only) are made to order only - minimum order of 720. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SESIO5290BK 10SESIO5290GY 10SESIO5290WH 10SESIO5400GY 10SESIO5600BK 10SESIO5600WH

Black Grey White Grey Black White

290ml Cartridge 290ml Cartridge 290ml Cartridge 400ml Sausage 600ml Sausage 600ml Sausage

$/100 12 12 12 12 12 12

10A.031 Simson ISR 70-08 SMP Adhesive/Sealant High strength ‘Silyl Modified Polymer’ (SMP) construction adhesive/sealant. Use for direct glazing adhesion applications for rapid and efficient bonding of windscreens and windows. Use in all areas of the transport market - car, bus/coach, truck, train and boat, especially where vehicles have to be released/moved shortly after installation. Meets U.S. safety standards FMVSS212. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SESIO8290BK 10SESIO8600BK

Black Black

290ml Cartridge 600ml Sausage

$/100 12 20

10A.032 Simson MSR CA SMP Adhesive/Sealant High performance ‘Silyl Modified Polymer’ (SMP) construction adhesive/sealant. Excellent U.V. and salt water resistance. Black colour made to order only - minimum order 720. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SESMCA290BK 10SESMCA290WH 10SESMCA600WH

Black White White

290ml Cartridge 290ml Cartridge 600ml Sausage

$/100 12 12 12

10A.033 Simson MSR BC SMP Adhesive/Sealant High performance ‘Silyl Modified Polymer’ (SMP) construction adhesive/sealant. Bedding compound for bonding subdeck to polyester, steel or wooden sundeck, and bonding teak strokes to subdeck. Excellent salt water resistance. Made to order only - minimum order of 720. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SESMBC290WH 10SESMBC600WH

White White

290ml Cartridge 600ml Sausage

$/100 12 12

Competitivents trade discoeu! availabl

Adelaide 08 8396 2781

10.011 © 2011 ALLFASTENERS


10: SEALANTS 10A.034 Simson MSR DC SMP Adhesive/Sealant High performance ‘Silyl Modified Polymer’ (SMP) construction adhesive/sealant. Deck caulking for watertight sealing of seams in teak decks. Excellent U.V. resistance and permanently flexible. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SESMDC290BK 10SESMDC600BK

Black Black

290ml Cartridge 600ml Sausage

$/100 12 12

10A.035 Simson MSR DC SMP Adhesive/Sealant High performance ‘Silyl Modified Polymer’ (SMP) construction adhesive/sealant. Fast track structural adhesive for direct glazing of screens and windows in marine environment. Also for bonding push boarders, deck fittings, deck hatches and portholes. Excellent U.V. and salt water resistance. Made to order only - minimum order 720. ORDER CODE

COLOUR

CARTRIDGE SIZE

10SESMFT290BK

Black

4ltr Tin

$/100 12

ADHESIVE SEALANTS 10A.036 Small Joint Sealant Flexible sealant, clear colour - for narrow joints. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SESMFT290BK

Black

4ltr Tin

$/100 12

10A.037 Moisture Seal Two component high performance, water based epoxy - waterproof vapour barrier membrane to prevent water seepage and permeation for floors, walls, water tanks, reservoirs and water retaining structures. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SEMSP-20L 10SEMSP-8L

Pail 2 x 10ltr Pail 2 x 4ltr

20ltr Kit 8ltr Kit

$/100 1 1

10A.038 Bostik 1316 Vapour Seal Solvent based bitumen coating. Quick drying sealer/water proofer - styrene safe. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SEB1316-20L

n/a

20ltr Tin

$/100 1

Techn specifica ical MSDS a tion and on most p vailable roducts! 10.012

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327

r Trade countaey open Mond , to Friday pm 0 7:00am - 4:3


10: SEALANTS

10A.039 Bostik 1312 Sound Deadener Solvent based bitumen coating. Sound deadener for sheet metal - dries hard. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SEB1312-20L

n/a

20ltr Tin

$/100 1

10A.040 Bostik 5603 Heat Transfer Sealant Oil based sealer - pumpable grade. Conductive refrigeration sealant. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SEB5603-20L

n/a

20ltr Tin

$/100 1

10A.042 Fuller WPM300™ Water Proofing Membrane High performance, water based, synthetic rubber waterproofing membrane. Formulated to withstand constant wet conditions - suitable for water immersion. Low odour, non-hazardous, permanently flexible, micro fibre reinforced. Brush or roller application. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SEWPM300-20L 10SEWPM300-4L

Grey Grey

20ltr Tin 4ltr Tin

$/100 1 1

More comprehensive range of waterproofing products available. Contact our sales team for more information.

10A.043 Fuller Water Resistant Taping Cement For sealing of joints in tiled areas and where water resistant sheets are used. No harmful or irritating odours when working in confined areas. Suitable for use where an acoustic sealant is required. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SEWRTC-16 10SEWRTC-6.4

Light Green Light Green

16kg Tub 6.4kg Tub

$/100 1 1

Please note: pallet rates available on most products. Also Material Safety Data Sheets (MSDS) are available on all products. Contact our sales team for more information.

Solvents and Cleaners available. See this section, page 10.031 Waterless Cleaning Towels available. See this section, page 10.040

Adelaide 08 8396 2781

10.013 © 2011 ALLFASTENERS


10: SEALANTS FOSTER SEALANTS Foster Sealants available to order. Contact our sales team for more information.

Adhesives 252WB: Single-component water-based insulation adhesive with strong initial grab, suitable for polystyrene and polyurethane insulation. Suitable for service temperatures up to 90ºC, and forms a strong bond to metals (other surface must be porous). 252WB is light brown in colour with a thick cream consistency, and can be painted after drying with water-based paints or coatings. 252WB is available in 20lt pails, is odourless and safe to use, and can be cleaned up with water.

Coatings 30-36 Sealfas: Water based material forming a tough, abrasion-resistant indoor protective coating for thermal insulation. May also be used as a lagging adhesive for lagging glass cloth or canvas. 30-36 is touch dry in 2 hours, and is fully cured after 15 hours (at 20ºC) to form a neat, white, washable finish over polystyrene and polyurethane foam insulations. For relative humidities above 75% or for insulated piping containing chilled water or other cold materials, additional vapour barrier protection is required. 30-80 Vapor-Safe: Water based material forming a white, U.V. resistant, fire-resistive flexible vapour barrier finish after 24 hours on most types of thermal insulation, including polystyrene foam. Lower viscosity version of 30-90 Vapor-Safe, suitable for spray and brush application, with a slight ‘paint-type’ odour. Use in high humidity environments to prevent water vapour permeation. Touch dry after 4 hours at 20ºC. 30-90 Vapor-Safe: Water based material forming a white, U.V. resistant, fire-resistive flexible vapour barrier finish after 24 hours on most types of thermal insulation, including polystyrene foam. Suitable for heavy duty industrial use on pipes, vessels and ducts, applied by trowel and air-less spray, and possesses a slight ‘paint-type’ odour. Use in high humidity environments to prevent water vapour permeation. Touch dry after 4 hours at 20ºC. 35-00 Sealfas GPM: Water based white general purpose mastic for the protection of thermal insulation. 35-00 is easy to apply by trowel and has a mild ‘paint-type’ odour. After 16 hours, it dries to form a tough, fire-resistive coating suitable for use outdoors, with excellent resistance to oils. Material is touch dry after 3 hours. 60-38 Monolar II Mastic: DuPont Hypalon-based white vapour barrier forms a tough flexible fire-resistive elastomeric finish on most types of thermal insulation. Possessing excellent chemical resistance and colour retention, 60-38 is touch dry in 3 hours, and is fully cured after 48 hours (at 20ºC). Suitable for trowel application in outdoor environments, 60-38 is used where superior vapour barrier performance is required. 90-07 H.I. Mastic: Highly durable protective weather coat for use over outdoor thermal insulation. Economical breathing asphaltic mastic with good weatherability, not subject to shrinking or cracking. Possesses good resistance to acids, alkalies, abrasion and general abuse. 90-07 is touch dry in 8 hours and is fully cured after 24 hours (at 20ºC).

Sealants 30-45 Foamseal: Grey vapour barrier sealant suitable for use with rigid thermal insulation. Tough water and weather resistant joint sealant preventing water penetration through insulation joints. May also be used as a bedding compound, remaining soft and flexible through repeated cycles of high and low temperature, without cracking or shrinking. Protects steel equipment from corrosion. Touch dry after 24 hours and dry through in 7 days. 32-14 High Velocity Duct Sealant: Fast setting, solvent-based material applied as a flexible duct sealant to high velocity air-conditioning duct-work. May also be used as an adhesive for duct fabrics and Clipfas hangers. Touch dry after 2 hours and fully cured after 48 hours at 20ºC. 32-19 High Velocity Duct Sealant: Fire resistive, water-based non-fibrated material applied as a flexible and durable duct sealant to high velocity air-conditioning duct-work. Forms a strong bond to sheetmetal when fully cured after 16 hours at 20ºC, and is touch dry after 1 hour. 95-44 Elastolar Sealant: Fire resistive, flexible butyl elastomar vapour barrier sealant, suitable for sealing joints in insulation, metal and masonary, wherever water-tight or air-tight seals are required. 95-44 is touch dry in 1/2 an hour, and may be top-coated with most solvent based coatings when fully cured after 72 hours. Forms a weather resistant material suitable for outdoor use without top-coating.

Indoor Air Quality 40-20 Anti-microbial Coating: Protective white finish specifically formulated to prevent the growth of mould and bacteria on its surface. Tough elastic finish suitable for application on walls, ceilings, pipes, and the interior and exterior of air-conditioning duct systems. Touch dry after 4 hours and fully cured after 16 hours. Mild ‘paint-type’ odour.

10.014

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327


10: SEALANTS

10B.001 Megagrip Construction Adhesive Solvent based flooring and wallboard high strength mastic adhesive. Excellent for glueing skirting to partitions. ORDER CODE

COLOUR

CARTRIDGE SIZE

10CAMG300YE 10CAMG850YE

Yellow Yellow

300ml 850ml

$/100 20 12

10B.066 Anchorweld 6031 Panel Adhesive Neoprene based sealant/adhesive. High Strength solvent based mastic, specifically for use in the installation of wood panelling (including Wet Areas), cement sheet,hardwood and plywood. ORDER CODE

PACK SIZE & TYPE

10CA6031-300BE 10CA6031-600BE

300ml Ctg 600ml Ssg

$/100 0 0

10B.002 Selleys Liquid Nails Construction Adhesive Solvent based general purpose construction adhesive. For timber to timber and plywood and particle board panels to timber. ORDER CODE

COLOUR

CARTRIDGE SIZE

10CASL300BE 10CASL300CL

Beige Clear

300ml 250g

$/100 20 12

10B.003 Selleys Liquid Nails Fast Grab Construction Adhesive Water based general purpose construction adhesive. For timber to timber and plywood and particle board panels to timber. ORDER CODE

COLOUR

CARTRIDGE SIZE

10CASF300BE

Beige

300ml

$/100 20

10B.004 Fuller Maxbond Construction Adhesive Synthetic rubber based adhesive, ideal for bonding common construction materials. Bridges gaps up to 9mm - effective when used on uneven surfaces. Reduces squeaking associated with nail ride in floors. Solvent based, water resistant - high bond strength. ORDER CODE

COLOUR

CARTRIDGE SIZE

10CAFM300BE

Beige

300ml

$/100 20

Adelaide 08 8396 2781

10.015 Š 2011 ALLFASTENERS


10: ADHESIVES 10B.005 Fuller Maxbond Fast Grip™ Construction Adhesive Water based, water clean-up, cures to high bond strength - use for flooring and panelling. Fast adhesion - very strong initial grab. Concorde sleeve is ideal for larger jobs. No caulking gun required - simply cut tip off and squeeze. ORDER CODE

COLOUR

CARTRIDGE SIZE

10CAFF300BE 10CAFF600BE 10CAFFBE-1.5

Beige Beige Beige

300ml 600ml 1.5kg

$/100 20 20 10

Horseshoe Packers available. See Hardware section, page 11.010 Use Fastdrive™ Anchors for fixing flooring to concrete. See Anchors section, page 1.034 10B.006 Roberts R1017 Timber Flooring Adhesive Solvent free, one part, polyurethane adhesive. For most types of wood - parquet strip, precoated and sheet timber flooring systems. For glueing to concrete, timber or over existing floors. ORDER CODE

COLOUR

PACK SIZE & TYPE

10CAR1017600BN 10CAR1017BN-10L

Brown Brown

600ml Sausage 10ltr Pail

$/100 20 1

A primer should be used on damp or uncured concrete with R1017. See this section, page 10.029 10B.070 Ultraset Timber Flooring Adhesive One part solvent free polyurethane timber flooring adhesive for most types of wood, parquet strip and sheet timber flooring systems to concrete, timber, or over existing floors. ORDER CODE

COLOUR

PACK SIZE & TYPE

10CAUS600BN 10CAUSBN-15L

Brown Brown

600ml Sausage 15ltr Pail

$/100 20 1

ADHESIVE SEALANTS 10B.007 Roberts R6345 General Purpose PVA Adhesive Economical grade PVA adhesive - for woodworking assemblies using MDF, particle board, soft timbers, panel door manufacturing and bonding laminates to MDF. Also used for bonding a wide range of porous materials - paper, board, fabric, cork, leather, carpet, craft applications and art and school supplies. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AR6345-0.5L 10AR6345-5L 10AR6345-20L 10AR6345-200L

White White White White

500ml Bottle 5ltr Bottle 20ltr Tub 200ltr Drum

10.016

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 20 4 1 1


10: ADHESIVES

10B.008 Roberts R6350 High Strength PVA Adhesive High quality, fast setting, tough, woodworking PVA adhesive. For bonding MDF, particle board, plywood, soft to medium-hard timbers, laminates, fabric, paper, cork, carpet etc. High solids, medium viscosity - delivers strong, efficient bonding. Ideal for most joinery applications. Similar to NSC CB3100, Anchorweld AW3100, Syntec AV101, Henkel G5866. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AR6350-0.5L 10AR6350-5L 10AR6350-20L 10AR6350-200L

White White White White

500ml Bottle 5ltr Bottle 20ltr Tub 200ltr Drum

$/100 20 20 20 4

10B.009 Roberts R6355 Crosslinking PVA Adhesive High solids, one part crosslinking PVA. Designed to bond a wide range of timbers, MDF, particle board and ply, etc. Develops excellent water resistance and bond strength within 24 hours. Full cure: 5-7 days. Ideal for bonding tongue and groove, solid timber and laminated flooring substrates - gives a tough, flexible and permanent bonding. Similar to NSC 2403051, Anchorweld AW3000, Syntec AV270, Henkel G5814. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AR6355-0.5L 10AR6355-5L 10AR6355-20L 10AR6355-200L

White White White White

500ml Bottle 5ltr Bottle 20ltr Tub 200ltr Drum

$/100 20 4 1 1

10B.010 Roberts R6380 Premium Grade Sandable PVA Adhesive Fast setting, high strength PVA. Bonds a wide range of timbers, MDF, particle board, ply, etc. Used for composite assemblies, where turning and/or shaping is required - particularly resistant to joint creep. Good acceptance of lacquers and stains - dries to a pale timber colour. Similar to NSC CB3300, Anchorweld AW3300, Syntec AV180. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AR6380-0.5L 10AR6380-5L 10AR6380-20L 10AR6380-200L

Yellow Yellow Yellow Yellow

500ml Bottle 5ltr Bottle 20ltr Tub 200ltr Drum

$/100 20 4 1 1

Technical Data Sheets and Material Safety Data Sheets (MSDS) are available on all products. Contact our sales team for more information.

10B.011 Roberts R6051 Melamine Board Adhesive Acrylic adhesive for bonding synthetic laminated board, such as melamine white board to end grain, timber, MDF and particle board. Used in the construction of cabinet carcasses and drawers. Not to be used to bond melamine face to itself or to other non-porous surfaces. Similar to NSC CB3400, Anchorweld AW3200, Syntec AV56. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AR6051-0.5L 10AR6051-5L 10AR6051-20L

White White White

500ml Bottle 5ltr Bottle 20ltr Tub

$/100 20 4 1

Adelaide 08 8396 2781

10.017 Š 2011 ALLFASTENERS


10: ADHESIVES 10B.012 Roberts R6200 EVA Laminating Adhesive High performance EVA based, laminating adhesive. Designed to bond a variety of vinyls and fabrics to porous substrates such as MDF, particle board, plywood, plasterboard, etc. Develops rapid wet tack and dries to a clear, tough flexible bond. Can also be used as a versatile paper converting adhesive, for coated papers and boards, suitable for packet making. Dry film is suitable for indirect contact with dry foodstuffs. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AR6200-20L 10AR6200-200L

White White

20ltr Tub 200ltr Drum

$/100 1 1

10B.013 Roberts R6270 EVA Laminating Adhesive High performance EVA based, vinyl laminating adhesive - solvent free. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AR6270-20L 10AR6270LV-20L

White White

20ltr Tub 20ltr Tub

$/100 1 1

10B.014 Roberts R6346 Panel Adhesive Supplied in 1000ltr tank. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AR6346-WK 10AR6346/1-WK

Winter Summer

Per kg-1000ltr Tank Per kg-1000ltr Tank

$/100 1 1

10B.064 Anchorweld AV180 MDF Board & Joinery Adhesive Premium grade MDF for bonding a wide range of MDF boards and wood, plywood, wood veneer, laminate, particle board and hardwood. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AAV180-5L 10AAV180-20L

Clear Clear

5ltr Tub 20Ltr Tub

$/100 1 1

10B.065 Anchorweld AV201 Very High Bond Strength Formaldehyde Resin Strength is reached with Part B Hardener. ORDER CODE

DESCRIPTION

PACK SIZE & TYPE

10AAV201A-20L 10AAV201BFN-3 10AAV201BSN-3 10AAV201A-5L 10AAV201BFN-0.6 10AAV201BSN-0.6

Part A Resin Urea Formald Part B Catalyst FN Powder (Winter) Fast Part B Catalyst SN Powder (Summer) Slow Part A Resin Urea Formald. Adh 5ltr Tub Part B Catalyst FN Powder (Winter) Fast Part B Catalyst SN Powder (Summer) Slow

20Ltr Tub 3kg 3kg 5ltr Tub 600gm 600gm

$/100 1 1 1 1 1 1

10B.068 Anchorweld AV56 Melamine Laminating Board Adhesive Fast Drying acrylic adhesive for face to edge bonding. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AAV56CL-0.5L 10AAV56CL-5L 10AAV56CL-20L

Clear Clear Clear

500ml 5Ltr 20Ltr

10.018

MELBOURNE 03 9330 0555 Š 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 20 1 1


ORDER CODE

Pack Size

10BBCA-1L 10BBCA-4L 10BBCA-20L

1 Litre 4 Litre 20 Litre

10: ADHESIVES

10B.072 B  ondcrete Concrete Adhesive/Masonary Additive PVA Base $/100 1 1 1

CONTACT & OTHER LIQUID ADHESIVES

10B.015 Clear Sprayable Contact Adhesive Solvent based sprayable grade contact adhesive. High quality, high temperature spray adhesive. Also available in red - see below. ORDER CODE

COLOUR

PACK SIZE & TYPE

10ACSCCL-20L 10ACSCCL-200L

Clear Clear

20ltr Tin 200ltr Drum

$/100 1 1

Air Spray Guns available. See Power Tools section 13 10B.016 Red Sprayable Contact Adhesive Solvent based sprayable grade contact adhesive. High quality, high temperature spray adhesive. Also available in clear - see above. ORDER CODE

COLOUR

PACK SIZE & TYPE

10ACSCRE-20L 10ACSCRE-200L

Red Red

20ltr Tin 200ltr Drum

$/100 1 1

10B.017 Bostik Contact Bond Adhesive All purpose rubber, metal and wood solvent based brush grade contact adhesive. ORDER CODE

COLOUR

PACK SIZE & TYPE

10ABCB-0.5L 10ABCB-1L 10ABCB-4L

Yellow Yellow Yellow

500ml Tin 1ltr Tin 4ltr Tin

$/100 10 10 4

Bostik Contact Bond Adhesive available in Gel form. See this section, page 10.021 10B.018 Anchorweld 101 Neoprene Contact Adhesive Solvent based neoprene brush grade contact adhesive - industrial version of contact bond. . ORDER CODE

COLOUR

PACK SIZE & TYPE

10AA101-20L 10AA101R-20L

Clear Clear

20ltr Drum 20ltr Drum

$/100 1 1

Adelaide 08 8396 2781

10.019 Š 2011 ALLFASTENERS


10: ADHESIVES 10B.019 Anchorweld 2800FF Contact Adhesive Solvent based neoprene sprayable grade contact adhesive - for foam to foam bonding. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AA2800FFCL-20L 10AA2800FFCL-200L 10AA2800FFRE-20L 10AA2800FFRE-200L

Clear Clear Red Red

20ltr Tin 200ltr Drum 20ltr Tin 200ltr Drum

$/100 1 1 1 1

10B.063 Anchorweld Super Spray Contact Adhesive Anchorweld Super Spray Contact Adhesive is neoprene contact adhesive, Premium spray grade contact adhesive for bonding most laminates. It is flame retardant with excellent heat resistance. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AA2700RE-20L 10AA2701CL-20L

Red Clear

20Ltr Drum 20Ltr Drum

$/100 1 1

10B.020 Bostik 1222 Contact Adhesive Solvent based contact adhesive. Natural rubber cement - used in golf grip attachment. Also used for porous materials - leather, fabrics, cork, etc. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AB1222-4L 10AB1222-20L

n/a n/a

4ltr Tin 20ltr Tin

$/100 1 1

10B.021 Bostik 1492 Contact Adhesive Solvent based neoprene sprayable grade contact adhesive. Premium post forming adhesive used in marine and upholstery applications. Excellent sprayability and temperature resistance. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AB1492CL-20L 10AB1492CL-200L 10AB1492RE-20L 10AB1492RE-200L

Clear Clear Red Red

20ltr Tin 200ltr Drum 20ltr Tin 200ltr Drum

$/100 1 1 1 1

10B.022 Bostik 1669 Contact Adhesive Solvent based polyurethane brush grade contact adhesive. Clear high strength PU. Use for bonding soles on footwear, and as a heat activated product. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AB1669-4L 10AB1669-20L

n/a n/a

4ltr Tin 20ltr Tin

$/100 1 1

10B.023 Bostik 1830 Clear Adhesive Solvent based adhesive - styrene butadiene rubber, sprayable grade. For bonding and laminating lightweight materials - especially expanded polystyrene in insulation and airconditioning applications. Fire rated to AS1530-3-1982 - styrene safe solvent system. Also available in blue (1831) - see below. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AB1830CL-20L 10AB1830CL-200L

Clear Clear

20ltr Tin 200ltr Drum

10.020

MELBOURNE 03 9330 0555 Š 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 1 1

ge, n a r t s e g The lar ive stocks, extens m quality premiu


10: ADHESIVES

10B.024 Bostik 1831 Blue Adhesive Solvent based adhesive - styrene butadiene rubber, sprayable grade. For bonding and laminating lightweight materials - especially expanded polystyrene in insulation and airconditioning applications. Fire rated to AS1530-3-1982 - styrene safe solvent system. Also available in clear (1830) - see above. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AB1831BL-20L 10AB1831BL-200L

Blue Blue

20ltr Tin 200ltr Drum

$/100 1 1

10B.025 Bostik 2402 Adhesive Solvent based adhesive - modified neoprene brush grade. High performance, 2 part system - use with curing agents 9101 or 9195. Used in the mining industry for repair and bonding of rubber substrates. Also used in manufacturing of inflatable boats and life vests, and rubber lining. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AB2402-0.5L 10AB2402-4L 10AB2402-20L

n/a n/a n/a

500ml Tin 4ltr Tin 20ltr Tin

$/100 10 4 1

Cleaning Solvents available. See this section, page 10.031 For Curing Agents, see this section, page 10.029

10B.026 Anchorweld 1768 Adhesive Solvent based nitrile rubber clear adhesive - for bonding flexible PVC, ABS and other similar plastics. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AA1768-4L

n/a

4ltr Tin

$/100 4

PASTE & MISCELLANEOUS ADHESIVES 10B.033 Bostik Contact Bond Gel Adhesive Solvent based gel paste neoprene contact adhesive - has high bond strength which increases with ageing. All purpose rubber, metal and wood contact adhesive. Excellent resistance to heat and water - especially suited to vertical surfaces. ORDER CODE

COLOUR

PACK SIZE & TYPE

10ABCBG-4L

Yellow

4ltr Tin

$/100 4

Bostik Contact Bond also available in liquid form. See this section, page 10.019

Adelaide 08 8396 2781

10.021 Š 2011 ALLFASTENERS


10: ADHESIVES 10B.034 Rocor® Green Stud Adhesive Specially formulated for bonding of plasterboard to metal internal framing or internal wooden studs. Water clean-up for uncured product, knife or scraper clean-up for cured product. ORDER CODE

COLOUR

PACK SIZE & TYPE

10ARSAGR-5.2

Green

5.2kg Tub

$/100 1

10B.035 Fuller Easy Tile™ Ceramic Tile Adhesive Wall and floor ceramic tile adhesive - smooth white formula spreads easily. Water clean-up, no slump, ammonia free formula. Pre-mixed: saves time and waste, ensures correct mix every time. No memory - tile position can be adjusted. Not suitable over waterproofing membrane. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AETCTA-1L 10AETCTA-4L 10AETCTA-10L

White White White

1ltr (1.5kg) Tub 4ltr (6kg) Tub 10ltr (15kg) Tub

$/100 12 1 1

10B.036 Mitre-Pro Adhesive & Activator Two Part adhesive for joining mitres on timber mouldings, etc. Sets rapidly - mitre joins can be held by hand for 8-10 seconds while setting. Bond timber, melamine and particle board - not suitable for glass or aluminium. Kit is supplied as 50gm adhesive and 200ml activator - one for each surface. ORDER CODE 10AMPADH-KIT 10AMPACT-0.2L 10AMPADH-0.05

DESCRIPTION

PACK SIZE & TYPE

Kit - Aerosol Activator+Adhesive Aerosol Adhesive

$/100

200ml/50gm Bottle

12

200ml Can 50gm Bottle

12 12

10B.037 Selleys Araldite Super Strength Adhesive Two part adhesive supplied in a syringe - mixes as it dispenses. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AARALSS-0.024L

n/a

24ml Syringe

$/100 12

10B.038 Selleys Araldite 5 Minute Adhesive Two part adhesive supplied in a syringe - mixes as it dispenses. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AARAL5M-0.024L

n/a

24ml Syringe

$/100 12

10B.039 Selleys Araldite Ultra Clear Adhesive Two part adhesive supplied in a syringe - mixes as it dispenses. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AARALUC-0.024L

n/a

24ml Syringe

10B.067 Permabond F246 Adhesive ORDER CODE

PACK SIZE & TYPE

10APF246320 10APINIT535

320ml Ctg Initiator #5x35ml

10.022

$/100 0 0

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 12


10: ADHESIVES

10B.040 Fuller Spray Bond™ Clear Adhesive Aerosol Multi-purpose aerosol spray contact adhesive - ideal for bonding paper, cardboard, photos, etc., at home and in the office. Arts, crafts, hobbies and studio use. Fast drying - non-staining, dries clear. ORDER CODE

COLOUR

PACK SIZE & TYPE

10AFSBCL-0.35

n/a

350gm Aerosol

$/100 12

10B.062 StarStuk PB 925 Post Form Contact Adhesive PB 925 is a non-flammable high performance, spray contact adhesive. Due to the high solids formulation of PB 925, high strength bonds can be achieved quickly and easily. Its fast tack, and high shear strength, along with excellent bonding characteristics, makes PB 925 an outstanding choice for many permanent laminating applications. ORDER CODE

COLOUR

PACK SIZE & TYPE

10APB925-0.482 10APB925NCL-17.2 10APB925NGR-17.2

Clear Clear Green

482g Aerosol 17.2kg Canister 17.2kg Canister

$/100 1 1 1

12 0 0

10B.041 Purbond Polyurethane Waterproof Adhesive Single pack polyurethane 100% waterproof adhesive - high strength. For bonding timber and most other surfaces - suitable for damp surfaces. Application to one surface only, sands very easily, does not blunt tools, has good gap filling properties, invisible in close fitting glue lines. Recommended for wooden boat building and timber laminating, joinery and fitout. ORDER CODE

COLOUR

PACK SIZE & TYPE

10APWA-0.25L 10APWA-0.5L 10APWA-1L 10APWA-5L 10APWA-20L

n/a n/a n/a n/a n/a

250ml Bottle 500ml Bottle 1ltr Bottle 5ltr Bottle 20ltr Tub

$/100 12 6 6 4 1

PASTE & MISCELLANEOUS ADHESIVES 10B.042 Bostik 6303 Hot Melt 12mm x 380mm Glue Stick Adhesive EVA based for hot melt gun. Packaging grade and general purpose use. Sold only as a pack. ORDER CODE

COLOUR

PACK SIZE & TYPE

Sticks per Pack

10AB6303-1 10AB6303-5 10AB6303-15

Pale Yellow Pale Yellow Pale Yellow

1kg Box 5kg Box 15kg Box

28 135 400

$/100

Hot Melt Glue Guns available. See Power Tools section 13

Adelaide 08 8396 2781

10.023 © 2011 ALLFASTENERS


10: ADHESIVES 10B.043 Bostik 6330 Hot Melt 12mm x 180mm Glue Stick Adhesive EVA based for hot melt gun. Multi-purpose use - clear in colour, flexible. Sold only as a pack. ORDER CODE

COLOUR

PACK SIZE & TYPE

Sticks per Pack

10AB6330-5

Translucent/Clear

5kg Box

300

$/100

10B.044 Fuller Mini Hot Melt 10mm x 102mm Glue Stick Adhesive EVA based glue stick for hot melt gun. General purpose use for the home, office and small jobs. ORDER CODE

COLOUR

PACK SIZE & TYPE

Sticks per Pack

10AFGS10(6)

Clear

Card

6

$/100

10B.045 Bostik 6013 Hot Melt Adhesive Pellet Off White 20kg Bag EVA based hot melt - medium viscosity. General purpose edge veneering. Sold only per bag/20kg. ORDER CODE

COLOUR

CARTRIDGE SIZE

10AB6013-20

Off White

20kg Bag

$/100 1

10B.046 Bostik 6207 Hot Melt Adhesive Pellet EVA hot melt pellets - fast coating rate. Pre-coated edge veneering - hot melt primer/hot melt for difficult substrates. Sold only per bag/20kg. ORDER CODE

COLOUR

CARTRIDGE SIZE

10AB6207-20

Off White

20kg Bag

Can’t find it?e It may still b LL A available - C US!

$/100 1

HOT MELT ADHESIVES-PRESSURE SENSITIVE 10B.058 Bostik 6508 Hot Melt Adhesive Block Pressure sensitive hot melt block - very aggressive tack. Plasticiser resistant, wide range of substrates, for hard to bond plastics. Used for security seal of courier bags. Sold only per tray/9kgs (16 x 600gm blocks). ORDER CODE

COLOUR

PACK SIZE & TYPE

10AB6207-20

Off White

20kg Bag

$/100 1

HOT MELT ADHESIVES-SEALANTS 10B.061 StarStuk PB 924 Pressure Sensitive Contact Adhesive PB 924 is a non-flammable, high performance, pressure sensitive adhesive. Fast tack and high shear strength in conjunction with a long open time makes PB 924 an excellent choice for most permanent adhesive applications. ORDER CODE

COLOUR

PACK SIZE & TYPE

10APB924-0.482 10APB924NCL-17.2 10APB924NGR-17.2

Clear Clear Green

482g Aerosol 17.2kg Canister 17.2kg Canister

10.024

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 1 1 1

12 0 0


10: ADHESIVES

10C.001 Expanding Space Filling Foam Rapidly expanding one-part polyurethane foam - for filling large gaps and holes. Seals and insulates, dense cell structure - expands up to 45 times. Approximate yield per can: 900gm (750ml) = 34ltr (can vary with different brands). ORDER CODE

PACK TYPE

PACK SIZE

$/100

10FEF-0.9

Aerosol Can

900gm (750ml)

12

10C.002 Expanding Fire Retardant Space Filling Foam Rapidly expanding polyurethane foam - for filling large gaps and holes. Seals and insulates, cures in 2 hours, dense cell structure - expands up to 45 times. Fire rated up to 3.5 hours acoustic insulator, paintable, triple expanding. Approximate yield per can: 500gm = 15-20ltr. ORDER CODE

PACK TYPE

PACK SIZE

10FFF-0.5

Aerosol Can

500gm

$/100 12

10C.003 Powers Fire-Power Expanding Flame Resistant PU Foam Paintable single component space filler - expands up to 35 times. Fire resistant up to 6 hours - efficient seal against smoke and gas. High thermal and acoustical insulation - high bond strength. Approximate yield per can: 750ml = 26ltr. ORDER CODE

PACK TYPE

PACK SIZE

10FFF8174-0.75L

Aerosol Can

750ml

$/100 12

10C.004 Powers Triggerfoam Single component polyurethane expanding foam - fills, seals, insulates. Exceptional bonding ability to concrete, brick, block, wood, steel, aluminium. 1 hour cure, dispense with triggerfoam tool, paintable. Approximate yield per can: 750ml = 45ltr. ORDER CODE

PACK TYPE

PACK SIZE

10FTF600-0.75L

Aerosol Can

750ml

$/100 12

For Triggerfoam Tools, see Hand Tools section, page 12.050 For Triggerfoam Cleaner, see this section, page 10.039

10C.005 Building Filler Two part repair filler - fills gaps, cracks and holes. Ideal for filling timber, timber mouldings, window frames, sashes, doors, furniture, steel, fibreglass, fibre cement, masonary and concrete. Fast drying - sets in 30 minutes, non-shrinking, sandable, can be drilled, screwed, nailed, planed and sawed. Easy to mix, will not slump - tools off smoothly. Extra hardener available - 40gm, code: 10FBFH-40. ORDER CODE

DESCRIPTION

PACK SIZE

10FBF-0.5L 10FBF-1L 10FBF-2L 10FBFH-0.040

Filler + Hardener Kit Filler + Hardener Kit Filler + Hardener Kit Filler + Hardener Kit

500ml Tin 1ltr Tin 2ltr Tin 40gm Tube

$/100 12 12 6 1

Adelaide 08 8396 2781

10.025 Š 2011 ALLFASTENERS


10: FILLERS & GROUTS 10C.006 Fuller Fire Tough™ Fireproof Cement High performing pre-mixed patching filler - ready for use. Ideal for pot belly stoves, flues, fireplaces, barbeques. Withstands temperatures up to 1500ºC. Sets hard, long lasting performance, water clean-up. ORDER CODE

COLOUR

PACK SIZE & TYPE

10FFT-0.85

n/a

850gm Tub

$/100 12

10C.007 Fuller Trademate Exterior Powder Filler Cement based powder filler - excellent adhesion. Weather and water resistant - use for sealing, bonding and filling cracks, holes and gaps in concrete, masonary, stone and stucco. ORDER CODE

COLOUR

PACK SIZE & TYPE

10FEPF-1

n/a

1kg Bag

$/100 1kg Bag

10C.008 Fuller Trademate Interior Powder Filler Plaster based powder filler - excellent adhesion. Sandable - can be nailed or screwed when dry without splitting or cracking. Use for filling cracks, holes and gaps in plaster, plasterboard, brick, concrete, etc. ORDER CODE

COLOUR

PACK SIZE & TYPE

10FIPF-1 10FIPF-2

n/a n/a

1kg Bag 2kg Bag

$/100 6 4

10C.009 Porion Exterior Flexible Filler One part exterior flexible filler by Timbermate: repairs, patches and fills. Will not shrink or fall out once applied. Rotted timber, masonary filling, patching timber imperfections on decks, window frames, etc. - unaffected by temperature and rain, will not crack with vibration. ORDER CODE

COLOUR

PACK SIZE & TYPE

10FPOEGY-0.5 10FPOEGY-1 10FPOEGY-5 10FPOEGY-15 10FPOEWH-0.5 10FPOEWH-1 10FPOEWH-5 10FPOEWH-15

Grey Grey Grey Grey White White White White

500gm Tub 1kg Tub 5kg Tub 15kg Tub 500gm Tub 1kg Tub 5kg Tub 15kg Tub

$/100 12 12 1 1 12 12 1 1

10C.010 Earl’s® Powder Putty Multi-purpose interior and exterior filler by Timbermate - high quality finish. Just mix with water - no waste, non shrinking, will not crack, fills to any depth. Perfect for timber, masonary, plasterboard, cement sheet and metal. Can be cut, carved and sanded - has an indefinite shelf life. Water resistant (not waterproof), weather resistant , not flexible. ORDER CODE

COLOUR

PACK SIZE & TYPE

10FEWP-0.5 10FEWP-1 10FEWP-5 10FEWP-20

n/a n/a n/a n/a

500gm Tub 1kg Tub 5kg Tub 20kg Tub

10.026

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 12 6 1 1


10: FILLERS & GROUTS

10C.011 Timbermate Woodfiller 4-in-1 non-acrylic water-based wood putty, edge filler, grain filler and crack filler. No waste, non cracking, non shrinking, non sinking, non flammable, won`t fall out! Unlimited shelf life - if it dries out, just add a few drops of warm water and softener. Sands easily - dust is re-usable, accepts all stains, coats and colours. ORDER CODE

COLOUR

PACK SIZE & TYPE

10FTPBX-0.5 10FTPBX-2 10FTPBX-8 10FTPBX-20 10FTPCE-0.5 10FTPCE-2 10FTPCE-8 10FTPCE-20 10FTPNS-0.5 10FTPNS-2 10FTPNS-8 10FTPNS-20 10FTPHA-0.5 10FTPHA-2 10FTPHA-8 10FTPHA-20 10FTPJR-0.5 10FTPJR-2 10FTPJR-8 10FTPJR-20 10FTPMH-0.5 10FTPMH-2 10FTPMH-8 10FTPMH-20 10FTPMP-0.5 10FTPMP-2 10FTPMP-8 10FTPMP-20 10FTPNA-0.5 10FTPNA-2 10FTPNA-8 10FTPNA-20 10FTPOA-0.5 10FTPOA-2 10FTPOA-8 10FTPOA-20 10FTPPI-0.5 10FTPPI-2 10FTPPI-8 10FTPPI-20 10FTPRM-0.5 10FTPRM-2 10FTPRM-8 10FTPRM-20 10FTPTK-0.5 10FTPTK-2 10FTPTK-8 10FTPTK-20 10FTPWN-0.5 10FTPWN-2 10FTPWN-8 10FTPWN-20 10FTPWH-0.5 10FTPWH-2 10FTPWH-8 10FTPWH-20

Brushbox Brushbox Brushbox Brushbox Cedar Cedar Cedar Cedar Ebony Ebony Ebony Ebony Hardwood Hardwood Hardwood Hardwood Jarrah Jarrah Jarrah Jarrah Mahogany Mahogany Mahogany Mahogany Maple Maple Maple Maple Natural Natural Natural Natural Oak Oak Oak Oak Pine Pine Pine Pine Rimu Rimu Rimu Rimu Teak Teak Teak Teak Walnut Walnut Walnut Walnut White White White White

500gm Tub 2kg Tub 8kg Tub 20kg Tub 500gm Tub 2kg Tub 8kg Tub 20kg Tub 500gm Tub 2kg Tub 8kg Tub 20kg Tub 500gm Tub 2kg Tub 8kg Tub 20kg Tub 500gm Tub 2kg Tub 8kg Tub 20kg Tub 500gm Tub 2kg Tub 8kg Tub 20kg Tub 500gm Tub 2kg Tub 8kg Tub 20kg Tub 500gm Tub 2kg Tub 8kg Tub 20kg Tub 500gm Tub 2kg Tub 8kg Tub 20kg Tub 500gm Tub 2kg Tub 8kg Tub 20kg Tub 500gm Tub 2kg Tub 8kg Tub 20kg Tub 500gm Tub 2kg Tub 8kg Tub 20kg Tub 500gm Tub 2kg Tub 8kg Tub 20kg Tub 500gm Tub 2kg Tub 8kg Tub 20kg Tub

$/100 24 6 1 1 24 6 1 1 24 6 1 1 24 6 1 1 24 6 1 1 24 6 1 1 24 6 1 1 24 6 1 1 24 6 1 1 24 6 1 1 24 6 1 1 24 6 1 1 24 6 1 1 24 6 1 1

We sell tions service, solu s and saving

Adelaide 08 8396 2781

10.027 © 2011 ALLFASTENERS


10: FILLERS & GROUTS 10C.014 Fosroc Construction Grout Class A, non-shrink cementitious grout for general construction use - for gap widths up to 100mm. Use for void filling in non-critical applications - tilt slab panels, precast panels. Supplied as a ready to use dry powder requiring only the addition of water. Coverage per 20kg bag - water addition: 2-2.4ltrs (dry pack) yield: 10ltrs, 2.4-3ltrs (trowellable) yield: 10.4ltrs, 3.2-4ltrs (flowable) yield: 10.9ltrs. ORDER CODE

COLOUR

PACK SIZE & TYPE

10GRCNS-20

n/a

20kg Bag

$/100 1

10C.015 Fosroc Conbextra GP Grout A high strength non shrink cementitious grout for general purpose grouting over a wide range of applications, for gap widths up to 100mm: heavy duty support beneath machine base plates, crane rails and stanchion bases and, anchoring masts, anchor bolts, etc. Supplied as a ready to use dry powder requiring only the addition of water. Coverage per 20kg bag - water addition: 2.2-2.4ltrs (dry pack) yield: 10.2ltrs, 2.6-3ltrs (trowellable) yield: 10.4ltrs, 3.4-4ltrs (flowable) yield: 10.9ltrs. ORDER CODE

COLOUR

PACK SIZE & TYPE

10GRCBXGP-20

n/a

20kg Bag

$/100 1

10C.016 Fosroc Conbextra GP Grout General purpose, heavy duty, self smoothing cementitious floor underlay. Forms a hard very smooth surface for a variety of floor finishes - carpet, ceramic tiles, sheet rubber, sheet vinyl and vinyl tiles - requires only the addition of water. 20kg bag yields 12ltrs (when mixed with 3.8ltrs of water) which covers approximately 1.2m2 at 10mm thick. ORDER CODE

COLOUR

PACK SIZE & TYPE

10GRCTGP-18

n/a

18kg Bag

$/100 1

An extensive range of other Grouts, Concrete Repair Epoxies, Levelling Grouts, etc. is available. Also Technical Data Sheets and Material Safety Data Sheets (MSDS) are available on all products. Contact our sales team for more information.

Fastening e problems? W n tio have the solu W CALL NO

10.028

MELBOURNE 03 9330 0555 Š 2011 ALLFASTENERS

SYDNEY 1300 255 327


10: FILLERS & GROUTS

10D.001 Bostik 9101 Curing Agent Coloured curing agent for neoprene, nitrile and polyurethane adhesives - especially 2402. 20ml bottle for 500ml adhesive, 150ml bottle for 4ltr adhesive. ORDER CODE

COLOUR

PACK SIZE

10CUB9101-0.02L 10CUB9101-0.15L

n/a n/a

20ml Bottle 150ml Bottle

$/100 1 1

10D.002 Bostik 9105 Curing Agent Similar to 9101 but clear/yellow in colour . 300gm can for 4ltr adhesive. ORDER CODE

COLOUR

PACK SIZE

10CUB9105-0.3

Clear/Yellow

300gm Can

$/100 1

PASTE & MISCELLANEOUS ADHESIVES 10D.004 Bostik 9252 Primer Metal primer to improve adhesion with contact adhesives - especially 2402. ORDER CODE

COLOUR

PACK SIZE & TYPE

10PRB9252-0.5L

n/a

500ml Bottle

$/100 10

10D.006 Bostik 9300 Primer Two part chemical primer to replace mechanical scouring (must be mixed together). Rubber primer. Halogenation primer part A - liquid. Halogenation primer part B - powder - for 5 litres. ORDER CODE

DESCRIPTION

PACK SIZE & TYPE

10PRB9300A-5L 10PRB9300B-0.1

Part A Part B

5ltr 100gm

$/100 5 1

ccount? a t i d e r No c Problem! No eries still liv Fast de for cash, card e availabl eque payments or ch

10D.007 Bostik N40 Primer Metal primer to improve adhesion to polyurethane sealants. ORDER CODE

COLOUR

PACK SIZE & TYPE

10PRBN40-1L

n/a

1ltr Bottle

$/100 10

10D.008 Bostik N41 Primer Clear metal primer - has a higher flash point than N40 primer. ORDER CODE

COLOUR

PACK SIZE & TYPE

10PRBN41-1L

Clear

1ltr Bottle

$/100 10

10D.009 Bostik N49 Primer Porous substrate primer for polyurethanes. ORDER CODE

COLOUR

PACK SIZE & TYPE

10PRBN49-1L 10PRBN49-4L

n/a n/a

1ltr Bottle 4ltr Bottle

$/100 10 1

10D.010 Bostik Butyl Tape Primer Black coloured adhesion primer. To improve adhesion when used with Bostik Butyl Tape. ORDER CODE

COLOUR

PACK SIZE & TYPE

10PRB044040-1L

Black

1ltr Bottle

$/100 1

Adelaide 08 8396 2781

10.029 Š 2011 ALLFASTENERS


10: CURING AGENTS/PRIMERS 10D.011 Simson Primer M Wash primer with adhesion promoter for non-porous substrates (metals, etc.) for SMP based products. Use on steel, aluminium, zinc, certain plastics and ceramic coated glass. ORDER CODE

COLOUR

PACK SIZE & TYPE

10PRBSM-0.25L 10PRBSM-1L

n/a n/a

250ml Bottle 1ltr Bottle

$/100 1 1

10D.012 Simson Primer P Wood primer for porous substrates - wood, teak and concrete for SMP based products. ORDER CODE

COLOUR

PACK SIZE & TYPE

10PRBSP-0.5L

n/a

500ml Bottle

$/100 1

10D.013 Simson Primer G Glass primer for glass directly exposed to U.V. light (not required when ceramic coated glass is used). ORDER CODE

COLOUR

PACK SIZE & TYPE

10PRBSG-0.25L

n/a

250ml Bottle

$/100 1

10D.014 Simson Primer K1 Plastic primer for use with several plastics. ORDER CODE

COLOUR

PACK SIZE & TYPE

10PRBSK1-0.5L

n/a

500ml Bottle

$/100 1

10D.015 Simson Autoseal Glass Cleaner Cleaner/activator (adhesion promoter) - necessary in the preparation of glass, aluminium and stainless steel where Simson Primer G or Primer G Extra will be used. ORDER CODE

COLOUR

PACK SIZE & TYPE

10D.015

n/a

250ml Bottle

$/100 1

10D.016 Simson Cleaner E Cleaner for degreasing different surfaces and removing non-cured adhesive from tools. ORDER CODE

COLOUR

PACK SIZE & TYPE

10PRBSE-0.5L

n/a

500ml Bottle

$/100 1

10D.017 Bostik 5077 Cleaner Cleaner and primer for non-porous surfaces. ORDER CODE

COLOUR

PACK SIZE & TYPE

10PRBSE-0.5L 10HOLA701-0.025

n/a n/a

500ml Bottle 25ml Bottle

$/100 1 10

10D.018 0034 FX-10 Exifix Spray Primer Orange Cleaner for degreasing different surfaces and removing non-cured adhesive from tools. ORDER CODE

PACK SIZE

10PR11034

150g

10.030

$/100 1

MELBOURNE 03 9330 0555 Š 2011 ALLFASTENERS

SYDNEY 1300 255 327

ies? Home deliver s? After hour No problem!


Styrene safe solvent blend. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SOB9901-20L

n/a

20ltr Tin

$/100 1

10E.002 Bostik 9906 Solvent Solvent blend - for cleaning PVC and PU materials. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SOB9906-20L 10SOB9906-4L

n/a n/a

20ltr Tin 4ltr Tin

GE: HUGE RANhe Cut down t r u number of yo suppliers

$/100 1 4

10E.003 Bostik 9907 Solvent Solvent blend - for clean-up of nitrile and polyurethane adhesives. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SOB9907-20L 10SOB9907-4L

n/a n/a

20ltr Tin 4ltr Tin

$/100 1 4

10E.004 Bostik 9913 Solvent Solvent blend - for clean-up of contact (neoprene) adhesives. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SOB9913-20L 10SOB9913-4L

n/a n/a

20ltr Tin 4ltr Tin

$/100 1 4

10E.005 Bostik 9934 Solvent Solvent blend - excellent cleaner/degreaser. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SOB9934-20L

n/a

20ltr Tin

$/100 1

10E.006 Acetone Solvent blend - cleaner/reducing agent. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SOACE-4L 10SOACE-25L

n/a n/a

4ltr Bottle 25ltr Tin

$/100 1 1

Adelaide 08 8396 2781

10.031 Š 2011 ALLFASTENERS

10: CURING AGENTS/PRIMERS

10E.001 Bostik 9901 Solvent


10: SOLVENTS 10E.007 Methylated Spirits ORDER CODE

COLOUR

PACK SIZE & TYPE

10SOMS-4L 10SOMS-20L

n/a n/a

4ltr Bottle 20ltr Tub

$/100 1 1

White Spirits available to order. Contact our sales team for more information.

10E.008 Mineral Turpentine ORDER CODE

COLOUR

PACK SIZE & TYPE

10SOMT-4L 10SOMT-20L

n/a n/a

4ltr Bottle 20ltr Tin

ORDER CODE

COLOUR

PACK SIZE & TYPE

10SOKERO-4L

n/a

4ltr Bottle

ORDER CODE

COLOUR

PACK SIZE & TYPE

10SOSH004-4L 10SOSH020-20L

n/a n/a

4ltr Tin 20ltr Tin

$/100 1 1

10E.009 Kerosene $/100 1

10E.010 Shellite $/100 1 1

10E.011 Superglow Multi-Purpose Thinner Solvent based multi-purpose thinner. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SOSG-4L 10SOSG-20L 10SOSG-60L

n/a n/a n/a

4ltr Tin 20ltr Tin 60ltr Drum

$/100 4 1 1

Rags available. See Hand Tools section, page 12.049

10E.012 Motospray Prepwash Wax/Grease Remover Solvent based degreaser. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SOPREP-4L 10SOPREP-20L 10SOPREP-60L

n/a n/a n/a

4ltr Tin 20ltr Tin 60ltr Drum

$/100 4 1 1

Water based Degreaser also available. Contact our sales team for more information.

10.032

MELBOURNE 03 9330 0555 Š 2011 ALLFASTENERS

SYDNEY 1300 255 327


10: SOLVENTS

10E.013 Distilled Water Pure, natural health water - free from sodium, fluoride, iron, chloride and other hard chemicals. ORDER CODE

COLOUR

PACK SIZE & TYPE

10CLDW-5L 10CLDW-25L

n/a n/a

5Litre 25ltr Tub

$/100 1 4

10E.014 Liquid Parts Wash (Non-Flammable) ORDER CODE

COLOUR

PACK SIZE & TYPE

10CLLPWNF-25L 10CLLPWNF-200L

n/a n/a

25ltr Tub 200ltr Drum

$/100 1 1

10E.015 Liquid Parts Wash (Flammable) Solvent, fast drying, flammable. ORDER CODE

COLOUR

PACK SIZE & TYPE

10SOLPW-24L 10SOLPW-200L

n/a n/a

25ltr Tub 200ltr Drum

$/100 1 1

10E.033 ABS Edge Cleaner ORDER CODE

COLOUR

PACK SIZE & TYPE

10CLPBACR 10ABSECL-20L

n/a n/a

0 20ltr Tin

$/100 12 12

10E.035 Contact Cleaner ORDER CODE

COLOUR

PACK SIZE & TYPE

10AFCC101-20L

n/a

20ltr Tin

$/100 1

Adelaide 08 8396 2781

10.033 © 2011 ALLFASTENERS


10: SOLVENTS AEROSOL CLEANERS

10E.018 Powers Triggerfoam Cleaner Solvent cleaner for cleaning uncured polyurethane foam out of triggerfoam applicator tools after use. ORDER CODE

PACK TYPE

PACK SIZE

10CSTFC-0.5L

Aerosol Can

500ml

$/100 6

For Triggerfoam, see this section, page 10.025 For Triggerfoam tools, see Hand Tools section, page 12.050

10E.019 CRC Contact 2000 Precision Electronic Cleaner Chemically inert, non-flammable, has thermal stability and rapid and complete evaporation. Removes light contaminates, atmospheric oils, dust, lint from precision electrical/electronic equipment - leaves no residue. Safe on most plastics. ORDER CODE

PACK TYPE

PACK SIZE

10CSC2012-0.2

Aerosol Can

200gm

$/100 6

10E.020 CRC CO Video Cleaner Plastic safe formula - technically proven, stable, inert high purity cleaning solvent. Non-corrosive, non-staining, fast and complete evaporation rate. Contains no lubricants removes light contaminates, dust, lint and moisture, from video and audio heads. ORDER CODE

PACK TYPE

PACK SIZE

10CSC2013-0.15

Aerosol Can

150gm

$/100 6

10E.021 CRC CO Contact Cleaner Plastic safe formula - technically proven, stable, inert high purity cleaning solvent. Non-corrosive, non-staining, rapid complete evaporation rate. Contains no lubricants - removes light contaminates, dust, lint and moisture, from atmospheric oils, finger prints, from precision electrical/electronic equipment. ORDER CODE

PACK TYPE

PACK SIZE

10CSC2016-0.35

Aerosol Can

350gm

$/100 6

10E.022 CRC NF Contact Cleaner Revolutionary precision cleaning solvent - instantly removes grease, oil, dirt, flux and other contaminates. Chemically stable, non-conductive, non-corrosive - high purity formula. Non-flammable, strong cleaning action, evaporates rapidly - leaves no residue. ORDER CODE

PACK TYPE

PACK SIZE

10CSC2017-0.4

Aerosol Can

400gm

10.034

MELBOURNE 03 9330 0555 Š 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 6


10: SOLVENTS

10E.023 CRC Airbrush Cleaner Safely removes dust and lint from all delicate precision equipment. Dry multi-purpose cleaner - works in the most inaccessible areas - no abrasion risk. Safe to use, non-corrosive, non-flammable, leaves no residue. Ideal for electronics, keyboards, avionics, lenses, photography optics, carburettor jets, tuning equipment, microscopes, telescopes. ORDER CODE

PACK TYPE

PACK SIZE

10CSC2066-0.3

Aerosol Can

300gm

$/100 6

10E.024 CRC VDU 99 Cleaner Cleans computer screens, touch screens, all scanners and CD’s. Anti-static, foaming, water based, streak free cleaner. Removes dust, finger prints, grease, bacteria, nicotine, smoke and dirt film. ORDER CODE

PACK TYPE

PACK SIZE

10CSC2071-0.2

Aerosol Can

200gm

$/100 6

10E.025 CRC Switch Cleaner/Lubricant Specially formulated to provide cleaning and lubrication to sensitive switches and contacts. Chemically dissolves and quickly cleans away oil, grease, dust, and atmospheric contaminates. Leaves a thin film that protects and lubricates precision drive mechanisms and moving switch and contact mechanisms. ORDER CODE

PACK TYPE

PACK SIZE

10CSC2001-0.3

Aerosol Can

300gm

$/100 6

10E.026 CRC Freeze Spray Multi-purpose dry coolant for maintenance and repairs - used to isolate circuits or components while testing for heat-induced failures. Protects sensitive components from high temperatures during soldering and desoldering. Ideal for electronics, automotive/engineering, furnishings - removes chewing gum or sweets from fabrics, curtains, carpets, chairs, etc. Non-flammable. ORDER CODE

PACK TYPE

PACK SIZE

10CSC2039-0.3

Aerosol Can

300gm

$/100 6

10E.027 CRC Lectra Clean Unique scientifically formulated heavy duty electrical cleaner and degreaser. Removes moisture, grease, oil, wax, dirt and other contaminates from motors, parts and other electrical/mechanical equipment. Non-conductive, non-corrosive, non-staining - may be harmful to some plastics. ORDER CODE

PACK TYPE

TIN

10CLC2018-4L 10CSC2018-0.4

Aerosol Can Aerosol Can

4ltr 400gm

$/100 4 6

10E.028 CRC Nail Gun Cleaner Quick-drying, non-conductive cleaner/degreaser for nail guns and pneumatic tools. Non-staining, non-corrosive, leaves no residue - removes oil, dirt, wax. Downtime minimised by cleaning without disassembly. ORDER CODE

PACK TYPE

PACK SIZE

10CSC3051-0.4

Aerosol Can

400gm

$/100 12

Adelaide 08 8396 2781

10.035 Š 2011 ALLFASTENERS


10: SOLVENTS 10E.029 Paslode Impulse & Pneumatic Degreaser Degreaser cleaner for pneumatic and Paslode Impulse tools. ORDER CODE

PACK TYPE

PACK SIZE

10CSB20544L-0.35

Aerosol Can

350gm

$/100 6

10E.030 CRC Natural Degreaser Naturally formulated, biodegradeable cleaner/degreaser - offers natural cleaning power of citrus. Doesn’t require water wash-off or leave sticky residue, non-corrosive - suitable for use on all metals. ORDER CODE

PACK TYPE

PACK SIZE

10CSC3076-0.4 10CLC3077-4L

Aerosol Can Bottle

400gm 4ltr

$/100 6 4

10E.031 CRC Xtra Shine Stainless steel cleaner and polish. Blend on an aqueous power base with a durable metal polish in just one easy step. Eliminates dirt, dust, finger prints and watermarks from stainless steel - leaves behind a non-greasy barrier that resists the return of stains. Especially for industrial applications - non-corrosive, biodegradeable, non-abrasive. Perfect for stainless steel, chrome, aluminium and other shiny metal surfaces. ORDER CODE

PACK TYPE

PACK SIZE

10CSC3090-0.4

Aerosol Can

400gm

$/100 6

10E.032 CRC Gasket Stripper Especially formulated for easy removal of tough bonded gaskets - regardless of age or adhesive resistance. Instantly softens old gasket cement for quick removal without damage. Safe on aluminium, steel and brass. ORDER CODE

PACK TYPE

PACK SIZE

10CSC5021-0.3

Aerosol Can

300gm

$/100 6

Full range of automotive cleaner aerosols available. Contact our sales team for more information.

10E.036 ACR Adhesive Remover ACR Adhesive Remover is a biodegradable, citrus solvent cleaner, degreaser and adhesive remover. It can be used safely on most surfaces and substrates, including painted surfaces, glass, porcelain, concrete, and is compatible with many plastics and vinyl. ORDER CODE

COLOUR

PACK SIZE & TYPE

10CLPBACR

n/a

397gm Aerosol

10.036

MELBOURNE 03 9330 0555 Š 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 12


10: SOLVENTS

10F.001 Bernzomatic® Fatboy Propane Gas Cylinder Disposable propane gas cylinder - fuel burns to 1871ºC (3400ºF). ORDER CODE

PACK TYPE

PACK SIZE

10GABTX9.0.479

Cylinder

479gm

$/100 12

10F.002 Bernzomatic® Mapp® Gas Cylinder Disposable Mapp® gas cylinder - fuel burns to 1960ºC (3650ºF). 33% faster than propane, 50% more heat release in primary flame and lasts up to 20% longer ORDER CODE

PACK TYPE

PACK SIZE

10GABMG9-0.454 10GABMG9.0.479

Cylinder Cylinder

454gm 479gm

$/100 12 12

10F.003 Bernzomatic® Oxygen Cylinder ORDER CODE

PACK TYPE

PACK SIZE

10GABOX9-0.04

Cylinder

40gm

$/100 12

Huge range of Bernzomatic® Mapp® and propane torches, kits and accessories, brazing and soldering torches available. Also range or Bernzomatic® welding, brazing and soldering rods available. Contact our sales team for more information.

10F.004 Nailer Fuel Cells ORDER CODE

DESCRIPTION

10F/55010 10F/MFCR18 10F/MFCY16 10F/MFCY18 10F/B20544R 10F/B20540A

Trak-It Fuel Cell Only Allfix Fuel Cell Framing 40g Red Cap Allfix Fuel Cell Finishing 16g Yellow Cap Allfix Fuel Cell Finishing 40g Yellow Cap Impulse Fuel Cell Trimmaster Yellow Cap Impulse Fuel Cell Framing Red Cap

$/100 1 1 1 1 1 1

Make an l Cal investment - ice! us for serv

Adelaide 08 8396 2781

10.037 © 2011 ALLFASTENERS


10: GAS FUELS POLISHING COMPOUNDS 10G.001 Polishing Compound Bar White: for high gloss finish on aluminum and aluminum alloys. Light Green: for high gloss finish on copper, brass and stainless steel. Light Blue: for high gloss finish on most plastics, silver, gold and die cast metals. Brown: for general purpose use on copper, brass, aluminum and most metals. Dark Grey: for cutting back scratches on copper, brass and stainless steel before high gloss polishing. ORDER CODE

COLOUR

PACK SIZE & TYPE

10CLPC-BN 10CLPC-DG 10CLPC-LB 10CLPC-LN 10CLPC-WH

Brown Dark Grey Light Blue Light Green White

n/a n/a n/a n/a n/a

$/100 1 1 1 1 1

10G.002 Abrsve Belt & Disc Cleaning Stick Abrasive restorers are used for cleaning coated abrasives. Made from natural rubber. ORDER CODE

SIZE

PACK SIZE & TYPE

10CLAR-L 10CLAR-M

32 x 32 x 200mm 50 x 50 x 200mm

n/a n/a

$/100 1 1

HOUSEHOLD CLEANERS & DISINFECTANTS 10G.003 Lemon Power Disinfectant Commercial grade with a fresh lemon fragrance - for use in all areas, hospital strength. ORDER CODE

COLOUR

PACK SIZE & TYPE

10CLLP-5L 10CLLP-25L

n/a n/a

5ltr Bottle 25ltr Tub

$/100 4 1

10G.004 Clear View Window Cleaner Window and glass cleaner - quick drying, non-streaking. ORDER CODE

COLOUR

PACK SIZE & TYPE

10CLCV-5L 10CLCV-25L

n/a n/a

5ltr Bottle 25ltr Tub

$/100 4 1

Polishing Mops available. See Abrasives section, page 9.019 Empty Spray Bottles available. See Hand Tools section, page 12.050

10G.005 All Purpose Cleaner Concentrated general purpose cleaner - for specialised or general household cleaning. Small and big jobs - great for vinyl upholstery, kitchen tiles and more. ORDER CODE

COLOUR

PACK SIZE & TYPE

10CLAP-5L 10CLAP-25L

n/a n/a

25ltr Tub 5ltr Bottle

10.038

MELBOURNE 03 9330 0555 Š 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 4 1


10: POLISHING & CLEANERS

10G.006 Lemon Fragrance Triple Cleaner 3-in-1 cleaner - disinfectant, deodoriser and cleaner in one. ORDER CODE

COLOUR

PACK SIZE & TYPE

10CLTC-25L

n/a

25ltr Tub

$/100 1

Range of mops and buckets available. Contact our sales team for more information.

10G.007 SNOBS Biocidal Sanitiser Safe non-toxic organic biocidal sanitiser - 99.9% effective against all food born pathogens. ORDER CODE

COLOUR

PACK SIZE & TYPE

10CLSN-5L 10CLSN-25L

n/a n/a

5ltr Bottle 25ltr Tub

$/100 4 1

10G.008 Lemon Power Dishwashing Liquid 50% concentrated premium quality detergent - surface active agents provide strength to cut through the toughest grease and grime with a minimum of effort. ORDER CODE

COLOUR

PACK SIZE & TYPE

10CLPDWL-5L 10CLPDWL-25L

n/a n/a

5ltr Bottle 25ltr Tub

$/100 4 1

10G.009 Anti Bacterial Spray & Wipe Concentrate Spray and wipe combination - modern grease cutting technology and surface active anti-bacterial agents. Concentrate for mixing to your requirements. ORDER CODE

COLOUR

PACK SIZE & TYPE

10CLABSWC-5L 10CLABSWC-20L

n/a n/a

5ltr Bottle 20ltr Tub

$/100 1 1

10G.010 Anti Bacterial Spray & Wipe Anti-static spray and wipe, hard surface cleaner and sanitiser - ready to use product. ORDER CODE

COLOUR

PACK SIZE & TYPE

10CLABSW-5L 10CLABSW-20L

n/a n/a

5ltr Bottle 20ltr Tub

$/100 1 1

Much larger range of cleaning liquids for special applications available. Full range of truck and car washes available. Also range of engine reconditioning chemicals and cleaners available. Contact our sales team for more information.

Adelaide 08 8396 2781

10.039 Š 2011 ALLFASTENERS


10: POLISHING & CLEANERS HAND CLEANERS 10G.011 Bostik Handi Clean Towels Waterless cleaning towel - removes polyurethane from your hands or tools, no water required! Convenient, tear off, excellent for factory or on site. Water based, citrus impregnated, non-woven viscose material. ORDER CODE

TOWEL SIZE

PACK QUANTITY & TYPE

10CLBHCT-90

203mm x 305mm

90 Towels (Tub)

$/100 6

10G.012 Bostik PU Liquid Hand Cleaner Non-toxic liquid hand cleaner. Contains natural moisturising oils - perfect for cleaning polyurethane sealants, oils, tar, paint, carbon, adhesives and other hard to remove grime from hands/forearms. ORDER CODE

COLOUR

PACK SIZE & TYPE

10CLBPUHC-4L

n/a

4ltr Bottle

$/100 4

10G.013 Liquid Hand Soap General purpose liquid hand cleaner. ORDER CODE

COLOUR

PACK SIZE & TYPE

10CLLHS-5L 10CLLHS-20L

n/a n/a

5ltr Bottle 20ltr Tub

$/100 4 1

10G.014 Quick Smart The Original Lemon Gel Hand Cleaner Heavy duty solvent based cleaner with lanolin and citrus oils. Removes oil, grease, ink, paint, etc. ORDER CODE

COLOUR

PACK SIZE & TYPE

10CLQS-3.5 10CLQS-19

n/a n/a

3.5kg Tin 19kg Tin

$/100 4 1

10G.015 Supa Grit Heavy Duty Pink Pumice Hand Cleaner Fine pumice grains - has a deep scrubbing action to help in the removal of heavy duty grease/grime. ORDER CODE

COLOUR

PACK SIZE & TYPE

10CLSG-4 10CLSG-21

n/a n/a

4kg Tin 21kg Tin

$/100 4 1

p Your one-sto ! p fastener sho 10.040

MELBOURNE 03 9330 0555 Š 2011 ALLFASTENERS

SYDNEY 1300 255 327


10: POLISHING & CLEANERS

10G.016 Orange Power Hand Cleaner Stiff gel hand cleaner - contains lanolin, antiseptic, citrus oils and poly beads. Natural citrus scent, contains no harsh solvents. Removes the toughest grime, oil, paint, ink, silicones, metal stains, etc. ORDER CODE

COLOUR

PACK SIZE & TYPE

10CLOPB-3.5 10CLOPB-19 10CLOPBP-5L 10CLOPBP-20L

n/a n/a n/a n/a

3.5kg Tin 19kg Tin 5ltr Pump Pack 20ltr Pump Pack

$/100 4 1 4 1

10E.017 Orange Citrus Gel Hand Cleaner Pleasant citrus scent, contains skin conditioner, biodegradable surfactants, acrylic polymer and PCMX - removes the toughest of grime. ORDER CODE

COLOUR

PACK SIZE & TYPE

10CLORP-0.5L

n/a

500ml Pump Pack

$/100 12

10H.001 Squirts Paint Aerosol ORDER CODE

COLOUR

PACK SIZE & TYPE

10PASQSE-0.31 10PASQGB-0.31 10PASQFB-0.31 10PASQGW-0.31 10PASQSW-0.31 10PASQFW-0.31 10PASQBG-0.31 10PASQCL-0.31 10PASQBS-0.31 10PASQGO-0.31 10PASQCM-0.31 10PASQYG-0.31 10PASQPK-0.31 10PASQMI-0.31 10PASQPU-0.31 10PASQRU-0.31 10PASQCD-0.31 10PASQDY-0.31 10PASQOR-0.31 10PASQMC-0.31

Satin Black Gloss Black Flat Black Gloss White Satin White Flat White Brunswick Green Clear Silver Gold Cream Gold Yellow Pink Missisippi Brown Purple Royal Blue Cherry Red Dusk Grey Orange Metallic Charcoal

310gm Aerosol Can 310gm Aerosol Can 310gm Aerosol Can 310gm Aerosol Can 310gm Aerosol Can 310gm Aerosol Can 310gm Aerosol Can 310gm Aerosol Can 310gm Aerosol Can 310gm Aerosol Can 310gm Aerosol Can 310gm Aerosol Can 310gm Aerosol Can 310gm Aerosol Can 310gm Aerosol Can 310gm Aerosol Can 310gm Aerosol Can 310gm Aerosol Can 310gm Aerosol Can 310gm Aerosol Can

$/100 12 12 12 12 12 12 6 6 6 12 6 6 6 6 6 6 6 12 6 6

Many other colours of Squirts paint aerosols available. Contact our sales team for more information.

Adelaide 08 8396 2781

10.041 Š 2011 ALLFASTENERS


10: POLISHING & CLEANERS 10H.002 Dymark Spray & Mark Paint Aerosol Hand held marking paint for inverted use: fast and convenient - fitted with a one piece ‘trigger cap’. Double action valve - enables both wide and narrow marks. ORDER CODE

COLOUR

PACK SIZE & TYPE

10PASMBK-0.35 10PASMRE-0.35 10PASMBL-0.35 10PASMGR-0.35 10PASMYE-0.35 10PASMOR-0.35 10PASMWH-0.35 10PASMFLRE-0.35 10PASMFLBL-0.35 10PASMFLGR-0.35 10PASMFLOR-0.35 10PASMFLPK-0.35 10PASMFLYE-0.35

Black Red Blue Green Yellow Orange White Fluoro Red Fluoro Blue Fluoro Green Fluoro Orange Fluoro Pink Fluoro Yellow

350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can

$/100 12 12 12 12 12 12 12 12 12 12 12 12 12

as Innovative ide re a and solutions ay just a call aw

10H.003 Fascia & Gutter Colorbond® Paint Aerosol Aerosol paints to match Colorbond® colours for touch-up of steel or painted screws. ORDER CODE

COLOUR

PACK SIZE & TYPE

10PAFGBR-0.35 10PAFGBU-0.35 10PAFGCC-0.35 10PAFGCG-0.35 10PAFGDO-0.35 10PAFGDU-0.35 10PAFGEH-0.35 10PAFGHE-0.35 10PAFGIB-0.35 10PAFGIS-0.35 10PAFGJA-0.35 10PAFGLF-0.35 10PAFGMR-0.35 10PAFGMO-0.35 10PAFGNS-0.35 10PAFGPE-0.35 10PAFGPA-0.35 10PAFGPL-0.35 10PAFGPR-0.35 10PAFGBE-0.35 10PAFGSA-0.35 10PAFGSH-0.35 10PAFGSU-0.35 10PAFGTO-0.35 10PAFGWE-0.35 10PAFGWI-0.35 10PAFGWS-0.35 10PAFGWG-0.35

Blue Ridge Bushland Classic Cream Cottage Green Deep Ocean Dune Evening Haze Headland Ironbark/Estate Ironstone Jasper Loft Manor Red Monument Night Sky Pale Eucalypt Paperbark Plantation Primrose/Domain Riversand Sandbark Shale Grey Surfmist Torres Blue Wheat/Harvest Wilderness Windspray Woodland Grey

350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can 350gm Aerosol Can

10.042

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12

For a comparison chart of old Colorbond® names, see Screws section, page 3.057


ORDER CODE

COLOUR

PACK SIZE & TYPE

10PAKMPGY-0.3 10PAKMPRE-0.3

Grey Red

300gm Aerosol Can 300gm Aerosol Can

10: AEROSOL PAINTS

10H.004 Wattyl Killrust Metal Primer Paint Aerosol $/100 12 12

10H.005 Wattyl Killrust Metal Primer Paint Aerosol ORDER CODE

COLOUR

PACK SIZE & TYPE

10PAKEPGY-0.3

Grey

300gm Aerosol Can

$/100 12

10H.006 Tremco Cold Galvanising Paint Aerosol 93% zinc purity coating for long term protection against rust and corrosion. Reacts with metal to replace damaged surfaces - produces a protective barrier against corrosion. Uses the same principles as hot dip galvanising - touch dry in 30 minutes. Excellent adhesion to galvanised metal - suitable for building and structural applications to steel and iron. ORDER CODE

PACK TYPE

PACK SIZE

$/100

10PATCGGY-0.4

Grey

400gm Aerosol Can

6

10H.007 Galmet Duragal Silver Zinc Cold Galvanising Paint Aerosol 93% zinc purity coating for long term protection against rust and corrosion. Specially silver tinted to best match the look of galvanised - no silver paint required! Reacts with metal to replace damaged surfaces - produces a protective barrier against corrosion. Uses same principles as hot dip galvanising - fast drying. Excellent adhesion to galvanised metal - suitable for building and structural applications to steel and iron. ORDER CODE

PACK TYPE

PACK SIZE

$/100

10PASZGBS-0.35 10PASCGGY-0.4

Silver Grey

350gm Aerosol Can 400gm Aerosol Can

24 24

Other CRC corrosion inhibitor sprays available. Contact our sales team for more information.

Enquire about Dymark’s other ranges of paints, including line marking paints and machines, product colour sprays and lacquers, and spray writer. Contact our sales team for more information.

site Early AMervice delivery sble availa Sydney

Tr open aMde counte Frida onday r y, to 4:30p7:00am m

ourne, (most Melbe metro areas) & Adelaid Adelaide 08 8396 2781

10.043 Š 2011 ALLFASTENERS


10: LUBRICANTS LUBRICANTS, OILS AND GREASE 10I.001 Penetrene Oil Lubricant The red oil that creeps....! Lubricates as it penetrates, protectant, lubricant and rust penetrator, for the workshop, heavy industry, farm, boat, car and office. ORDER CODE

PACK TYPE

PACK SIZE

10LPEN-0.4 10LPEN-0.5L 10LPEN-1L 10LPEN-5L 10LPEN-20L 10LPEN-200L

Aerosol Can Bottle Trigger Spray Tin Tub Drum

400gm 500ml 1ltr 5ltr 20ltr 200ltr

$/100 12 9 4 1 1 12

10I.002 WD-40 Lubricant Building and industrial lubricant - stops squeaks, drives out moisture, cleans and protects, loosens rusted parts, frees sticky mechanisms. ORDER CODE

PACK TYPE

PACK SIZE

10LWD40-0.300 10LWD40-4L

Aerosol Can Bottle

300gm 4ltr

$/100 4 9

10I.003 Selleys RP7 Lubricant Aerosol Building and industrial lubricant - stops squeaks, drives out moisture, cleans and protects, loosens rusted parts, frees sticky mechanisms. ORDER CODE

PACK TYPE

PACK SIZE

10LRP7-0.3

Aerosol Can

300gm

$/100 6

Rags available. See Hand Tools section, page 12.049

10I.004 CRC 5.56 Lubricant Multi-purpose penetrant, lubricant, water dispersant, rust preventative. Loosens rusted parts - 100’s of uses in 100’s of places! ORDER CODE

PACK TYPE

PACK SIZE

10LC5005-0.4 10LC5004-4L

Aerosol Can Bottle

400gm 4ltr

10.044

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 6 4


10: LUBRICANTS

10I.005 CRC 2.26 Lubricant Lubricant - improves electrical properties. Especially prepared to prevent and repair electrical failures due to moisture, corrosion, dirt or friction. Displaces and seals out moisture, cleans, lubricates and penetrates. ORDER CODE

PACK TYPE

PACK SIZE

10LC2005-0.55 10LC2006-4L

Aerosol Can Bottle

550gm 4ltr

$/100 4 6

10I.006 CRC 3.36 Lubricant Prevents rust and corrosion by displacing and sealing out moisture, forms a continuous protection barrier against water and oxygen. Forms a thin invisible film - never becomes dry or brittle, penetrates the finest pores/cracks. Protects against finger printing and corrosion from the acids and oils of human handling. ORDER CODE

PACK TYPE

PACK SIZE

10LC3005-0.3 10LC3006-4L

Aerosol Can Bottle

300gm 4ltr

$/100 4 6

10I.007 CRC Marine 66 Lubricant Multi-purpose compound - penetrates, loosens scale, frees frozen parts and keeps them free, assists cleaning, has a beneficial lubricating effect. Displaces moisture, forms a continuous non-hardening film. Use on all marine inboard and outboard motors. ORDER CODE

PACK TYPE

PACK SIZE

10LC6006-0.3 10LC6008-4L

Aerosol Can Bottle

300gm 4ltr

$/100 6 6

10I.008 CRC Electrical Quality Silicone Lubricant Aerosol High quality multi-purpose formula - lubricates, waterproofs and protects with a thin clear film. ORDER CODE

PACK TYPE

PACK SIZE

10LC2094-0.3

Aerosol Can

300gm

$/100 6

10I.009 CRC Extreme Duty Silicone Lubricant Aerosol Premium quality silicone lubricant - excellent temperature viscosity and lubrication characteristics. ORDER CODE

PACK TYPE

PACK SIZE

10LC3030-0.3

Aerosol Can

300gm

$/100 6

Adelaide 08 8396 2781

10.045 Š 2011 ALLFASTENERS


10: LUBRICANTS 10I.010 CRC Wire Rope & Cable Lubricant Aerosol Lubricates and protects wire rope to help prevent strand failure and extend working life. Resists water wash off and high temperature sling off. ORDER CODE

PACK TYPE

PACK SIZE

10LC3035-0.285

Aerosol Can

285gm

$/100 6

10I.011 CRC Dry Glide Lubricant Aerosol A multi-purpose long term dry film lubricating treatment that reduces friction. Penetrates and bonds to metal, wood, rubber, plastic, glass and most other surfaces. Non-staining micro-thin film prevents sticking - will not freeze, melt or wash off. Seals out moisture, inhibits corrosion, resists oil, dirt and dust build-up. ORDER CODE

PACK TYPE

PACK SIZE

10LC3040-0.15

Aerosol Can

150gm

$/100 6

10I.012 CRC 808 Silicone Spray Lubricant Aerosol Concentrated formula - provides a thin durable, odourless film, that revives, lubricates, waterproofs and protects. Will not mark or stain - ideal for use on all metal, plastic, rubber, fabric, wood and painted surfaces. Reduces friction and galling - even on metal surfaces. Ideal for in-plant conveyors, guides and rails, mould release, rolling and sliding mechanisms. ORDER CODE

PACK TYPE

PACK SIZE

10LC3055-0.33

Aerosol Can

330gm

$/100 6

10I.013 Helmar H4000 Silicone Spray Lubricant Aerosol Multi-purpose, food grade, non-staining silicone spray - lubricates, protects, shines. Ideal for lubricating vertical drape and curtain tracks, draw slides, hinges, zippers, saw blades. Shines, protects leather, rubber, and sailing, boating and ski equipment, plus 100’s more uses. ORDER CODE

PACK TYPE

PACK SIZE

10LH4000-0.3

Aerosol Can

300gm

$/100 6

10I.014 CRC Lanoshield Aerosol Lanolin based, non-toxic corrosion inhibitor, release agent and lubricant. Forms a thin film of lanolin - completely seals off surfaces from the elements. Non-evaporative, will not wash off, repels water. ORDER CODE

PACK TYPE

PACK SIZE

10LC3150-0.35 10LC3154-4L

Aerosol Can Bottle

350gm 4ltr

$/100 6 4

Can’t find it?e It may still b LL A available - C US! 10.046

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327


10: LUBRICANTS

10I.015 CRC TAC2 Chain Lubricant Aerosol Safe to use on all chain and wear surfaces - resists cold, hot and salt water wash off. Reduces wear and friction, and is stable and long lasting. Ideal for all chain drives, bottling plant, chain rails, sprockets, open gears, snatch blocks, hoists, conveyors, fork lifts, tractors, farm equipment, cement trucks. ORDER CODE

PACK TYPE

PACK SIZE

10LC5035-0.3

Aerosol Can

300gm

$/100 6

10I.016 CRC White Lithium Grease Lubricant Aerosol High purity, high quality, grade 2 white lithium based grease lubricant. Provides long lasting lubrication with excellent water and heat resistance, corrosion protection and film strength - white in colour for easy visual checking. Reduces friction and wear in metal-to-metal and metal-to-plastic applications. Ideal lubricant and protectant for automotive workshop/factory and home uses. ORDER CODE

PACK TYPE

PACK SIZE

10LC5037-0.3

Aerosol Can

300gm

$/100 6

10I.017 CRC Power Lube Aerosol A unique lubricant that incorporates a sophisticated additive package with Teflon®. Provides long lasting protection against friction and wear. Works longer and better than other lubricants under the extremes of pressure and the environment. ORDER CODE

PACK TYPE

PACK SIZE

10LC3045-0.35

Aerosol Can

350gm

$/100 6

10I.018 CRC Penetr8 Lubricant Aerosol High speed penetrant - rapidly dissolves rust and corrosion in fasteners, pins and bound mechanisms. Helps in the disassembly of mechanical equipment, fittings and fixtures. ORDER CODE

PACK TYPE

PACK SIZE

10LC5501-0.4

Aerosol Can

400gm

$/100 6

10I.019 CRC Belt Grip Aerosol Non-drying, water resistant, chemically stable - improves traction, extends the life of drive belts, allows runs under reduced belt tension, creates a non-slip surface that doesn’t attract dust and dirt. ORDER CODE

PACK TYPE

PACK SIZE

10LC3081-0.4

Aerosol Can

400gm

$/100 6

t? it accoun! d e r c o N Problem No eries still liv Fast de for cash, card e availabl eque payments or ch Adelaide 08 8396 2781

10.047 © 2011 ALLFASTENERS


10: LUBRICANTS 10I.020 CRC Aerostart Aerosol Unique and special formulation - starts engines instantly. Powerful anti-corrosive and anti-knock qualities. Ideal for all diesel and petrol engines in trucks, tractors, heavy equipment, marine engines, chainsaws, lawn mowers and compressors. ORDER CODE

PACK TYPE

PACK SIZE

10LC5052-0.4

Aerosol Can

400gm

$/100 6

Range of food grade lubricants available. Contact our sales team for more information.

10I.021 Air Tool Lubricant Oil ORDER CODE

PACK TYPE

PACK SIZE

10LATO-0.025L 10LATO-0.5L 10LATO-1L 10LATO-5L 10LATO-20L

Bottle Bottle Bottle Bottle Tub

250ml 500ml 1ltr 5ltr 20ltr

$/100 12 12 6 6 6

10I.022 Air Compressor Lubricant Oil ORDER CODE

PACK TYPE

PACK SIZE

10LACO-1L 10LACO-5L 10LACO-20L

Bottle Bottle Tub

1ltr 5ltr 20ltr

$/100 12 4 1

Huge range of oils available: chain bar oil, gear lube, hydraulic oil, jack oil, mould oil, sprocket/gear/chain oil, stamping oil, shredder oil, four stroke/two stroke oil and much more! Contact our sales team for more information.

10I.023 CRC Aerostart Aerosol For use with Paslode Impulse tools. ORDER CODE

PACK TYPE

PACK SIZE

10LB20544F-4oz

Bottle

4oz

$/100 6

In-house tool servicing and repairs available. Contact our sales team for more information.

10I.024 P.A. Tool Lubricating & Releasing Oil For lubricating P.A. explosive tools. ORDER CODE

PACK TYPE

PACK SIZE

10LPA9316-0.1L

Spray Bottle

100ml

10.048

MELBOURNE 03 9330 0555 Š 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 6


10: LUBRICANTS

10I.025 Inox Super Lubricant Aerosol Displaces moisture, penetrates the severest of corrosion, lubricates, gives lasting protection - does not dry out or wash off with water. Designed for heavy industrial use and extreme climatic conditions. Will not harm metal points, surfaces, plastics, paints, enamels or finishes, fibreglass, formica or neoprene seals. ORDER CODE

PACK TYPE

PACK SIZE

10LCI1031-0.3 10LCI1031-20L

Aerosol Can Drum

300gm 20Ltr

$/100 12 1

10I.026 Bostik Never-Seez® Anti-Seize & Lubricating Compound Copper based anti-seize and lubricating compound for general industrial use. Protects against extreme heat to 1000ºC - assures absolute parts protection against corrosion, seizure, galling and rust. Brush top lid on tin or available in a squeezy tube. ORDER CODE

PACK TYPE

PACK SIZE

10LNSB-4-0.1 10LNSBT-16-0.5

Tube Tin

100gm 500gm

$/100 12 6

10I.027 Bostik Never-Seez® Pure Nickel Anti-Seize & Lubricating Compound Pure nickel special anti-seize and lubricating compound for general industrial use. Protects against extreme heat to 1300ºC - assures absolute parts protection against corrosion, seizure, galling and rust. Brush top lid on tin, contains no copper. ORDER CODE

PACK TYPE

PACK SIZE

10LNSBT-16N-0.5

Tin

500gm

$/100 6

10I.028 Singer Oil All purpose high quality oil for household and industrial use. ORDER CODE

PACK TYPE

PACK SIZE

10LSNN043-0.1L

Bottle

100ml

$/100 100ml

10I.029 Pressol Graphite Lubricant Powder Finely ground natural graphite - free of grease and odourless: stops creaking and squeaking for a long time. Lubricates car and cylinder locks, hinges, latches, etc. - prevents locks from freezing up. ORDER CODE

PACK TYPE

PACK SIZE

10LH10589-0.05

Bottle

50gm

$/100 10

10I.030 Pressol Multipurpose Grease For friction and anti-friction bearing lubrication at high-power drive - waterproof, acid free. ORDER CODE

PACK TYPE

PACK SIZE

10LH12511-0.4

Tube

400gm

$/100 20

Grease Guns to suit Grease Cartridge available. See Hand Tools section, page 12.051

Adelaide 08 8396 2781

10.049 © 2011 ALLFASTENERS


10: LUBRICANTS 10I.031 Black Ultra EP2 Grease High temperature bearing and multi-purpose lithium complex grease with MoS2. Suitable for bearings in disc brakes, CV joints, and general purpose servicing with heavy load capabilities. ORDER CODE

PACK TYPE

PACK SIZE

10LWEP2G-0.45 10LWEP2G-20

Tube Tub

450gm 20kg

$/100 24 1

10I.032 Antispatter Antispatter spray for welding - silicone free, can be surface painted after use. Apply spray on Mig torch consumables and welding surfaces. ORDER CODE

PACK TYPE

PACK SIZE

10LWAS-0.4 10LWAS-20L 10LWAS-0.454 10LWASG-0.4

Aerosol Can Drum Aerosol Can

400gm 20ltr 454gm 400gm

$/100 12 1 12 12

Welding Rods and Wire available. See Hardware section, page 11.094

Complete range of welding equipment available. Contact our sales team for more information.

LUBCUTTING FLUIDS AND COMPOUNDS 10I.033 Trefolex Cutting Compound The magic cutting compound - green coloured paste, active cutting, contains a colloid. Melts slowly as frictional heat is generated - will not corrode steel or affect aluminium. Maintains efficient lubrication while pipe screwing, hack sawing, tapping, reaming, etc. Suitable for use with all hand tools - prolongs the life of the tool. ORDER CODE

PACK TYPE

PACK SIZE

10CTT3060-0.5L 10CTT3061-2L

Tub Tin

500ml 2ltr

$/100 6 6

10I.034 Trefolex Cutting Compound Extreme duty thick cutting fluid - sticks to the cutting tool throughout the operation. Ideal for tapping and drilling stainless, carbon steel, inconel, monel, hastelloy, titanium, aluminium and other alloys and exotics. ORDER CODE

PACK TYPE

PACK SIZE

10CTT3065-0.5L

Bottle

500ml

$/100 6

Range of aluminium cutting machinery and systems available. For further information contact our sales team.

10.050

MELBOURNE 03 9330 0555 Š 2011 ALLFASTENERS

SYDNEY 1300 255 327


10: LUBRICANTS

10I.035 Trefolex AL Cutting Fluid Solvent based cutting fluid - provides superior lubricity and cooling in cutting aluminium and its alloys. Evaporates quickly, leaves little residue, provides excellent finishes. ORDER CODE

PACK TYPE

PACK SIZE

10CTT3067-0.5L

Bottle

500ml

$/100 6

10I.036 Trefolex C.D.T. Cutting Oil Ideal for the critical machining of non-ferrous metals for all operations in machinability group 1, and less critical operations in machinability group 2. Nickel alloys, nitro alloy steel, cast iron, alloy steel, stainless steel, monel metals - leaves an anti-corrosive residue. ORDER CODE

PACK TYPE

PACK SIZE

10CTT3063-0.3 10CTT3064-4L

Aerosol Can Aerosol Can

300gm 4ltr

$/100 6 4

For Aluminium Cutters, see Drilling & Cutting section, page 8.022

10I.037 Solcut GP (A) Cutting Fluid Soluble oil/milk. ORDER CODE

PACK TYPE

PACK SIZE

10CTSOLA-20L 10CTSOLA-5L

Tub Bottle

20ltr 5ltr

$/100 1 4

10I.038 Coolant/Cutting Fluid Designed to assure the cleanest cut possible when working with non-ferrous metals. Unique scientific formula - provides optimum cooling and lubricating properties. Specifically formulated for spray mist systems - can be used in concentrate form to lubricate punching dies. ORDER CODE

PACK TYPE

PACK SIZE

10CTLSOL-1L 10CTLSOL-5L 10CTLSOL-20L

Bottle Bottle Tub

1ltr 5ltr 20ltr

$/100 6 4 1

10I.039 Coolant/Cutting Fluid Unique synthetic blend - lengthens tool life when cutting, milling, reaming, tapping and drilling, metal, wood, and plastics. Reduces heat and friction, water soluble (water clean-up). ORDER CODE

PACK TYPE

PACK SIZE

10CT68040-0.17L 10CT68047-3.8L

Bottle Bottle

6oz (0.17ltr) 1 Gal. (3.8ltr)

$/100 12 1

Adelaide 08 8396 2781

10.051 Š 2011 ALLFASTENERS


10: LUBRICANTS 10I.040 Aluminium Cutting Lubricant Traditional yellow, tallow based aluminium lubricant - used for lubricating circular saws, band saws, etc., when cutting aluminium and other non-ferrous metals and also to prevent clogging of sanding belts/discs. ORDER CODE

PACK TYPE

PACK SIZE

10CTAL700-0.7

Card Tube

700gm

$/100 10

10I.041 Aluminium Cutting Wax Lubricant White wax aluminium lubricant (stearene) - for lubricating circular saws, band saws, etc., when cutting aluminium and other non-ferrous metals and also to prevent clogging of sanding belts/discs. ORDER CODE

PACK TYPE

PACK SIZE

10CTAWAX-0.55

Foil Tray

550gm

$/100 10

10I.042 Relton Rapid Tap All-Metal Cutting Fluid The safest all-purpose heavy duty cutting fluid for all metals: aluminium, brass, bronze, cast iron, copper, magnesium, molybdenum, stainless, stellite, titanium, etc. Improves surface finish, machining accuracy and tool life: for drilling, milling, threading, broaching, boring, turning, tapping, engraving, reaming, sawing. ORDER CODE

PACK TYPE

PACK SIZE

10CTCFRT-0.118L 10CTCFRT-0.473L 10CTCFRT-3.8L

Can Can Can

118ml (4oz) 473ml (1Pint) 3.8ltr (1Gallon)

$/100 24 12 4

10I.043 Rapid Tap All-Metal Cutting Paste The safest all-purpose heavy duty cutting paste for all metals: aluminium, brass, bronze, cast iron, copper, magnesium, molybdenum, stainless, stellite, titanium, etc. Improves surface finish, machining accuracy and tool life: for drilling, milling, threading, broaching, boring, turning, tapping, engraving, reaming, sawing. ORDER CODE

PACK TYPE

PACK SIZE

10CTCPRT-0.236L

Jar

236ml (8oz)

$/100 12

10I.044 Relton A-9 Aluminium Cutting Fluid Use for easier and faster tapping, drilling, reaming, etc. - for all types of aluminium and other non-ferrous metals. Effective for any machining - drilling, reaming, cut-off, stamping, polishing, etc. ORDER CODE

PACK TYPE

PACK SIZE

10CTCFA9-0.118L 10CTCFA9-0.473L 10CTCFA9-3.8L

Can Can Can

118ml (4oz) 473ml (1Pint) 3.8ltr (1Gallon)

$/100 24 12 4

Aluminium Saw Blades available for portable and stationary machines. See Drilling & Cutting section, page 8.112 Full range of Taps and Dies available. See Drilling & Cutting section, page 8.028

10.052

MELBOURNE 03 9330 0555 Š 2011 ALLFASTENERS

SYDNEY 1300 255 327


10: LOCTITE

Thread Locking Use of Thread Locker to lock threaded fasteners, resists vibration, is a one part product - clean and easy to apply, can be used on all sizes of fasteners, and, seal threads - allowing through-hole tapping.

10J.001 Loctite 290 Threadlocker Wicking grade medium strength for locking already assembled fasteners up to M12 threads. Recommended primer: 7649. ORDER CODE

PACK TYPE

PACK SIZE

10LOC290-0.01L 10LOC290-0.05L 10LOC290-0.25L

Bottle Bottle Bottle

10ml 50ml 250ml

$/100 10 10 1

10J.002 Loctite 222 Threadlocker Low strength for locking unassembled fasteners up to M36 thread and for low strength metals such as aluminium or brass which could break during disassembly. Recommended primer: 7471. ORDER CODE

PACK TYPE

PACK SIZE

10LOC222-0.01L 10LOC222-0.05L 10LOC222-0.25L

Bottle Bottle Bottle

10ml 50ml 250ml

$/100 10 10 1

10J.003 Holdtite T43 Threadlocker Effective on all types of metal threaded fasteners, where disassembly for servicing is required. Prevents loosening on vibrating parts such as pumps, motor mounting bolts, gear boxes or presses. Medium strength for locking up to M36 threads. Recommended primer: 7471. ORDER CODE

PACK TYPE

PACK SIZE

10LOC243-0.01L 10LOC243-0.05L 10LOC243-0.25L

Bottle Bottle Bottle

10ml 50ml 250ml

$/100 10 10 1

10J.004 Loctite 262 Threadlocker For use on all metal fasteners (including stainless and zinc coated steels), where regular removal for maintenance is not required. Recommended for permanently locking studs on engine blocks and pump housings. High strength for locking up to M36 threads. Recommended primer: 7649. ORDER CODE

PACK TYPE

PACK SIZE

10LOC262-0.01L 10LOC262-0.05L 10LOC262-0.25L

Bottle Bottle Bottle

10ml 50ml 250ml

$/100 10 10 10

Adelaide 08 8396 2781

10.053 Š 2011 ALLFASTENERS


10: LOCTITE 10J.005 Loctite 277 Threadlocker Outstanding chemical resistance, suitable for sealing most refrigerants. Very high strength for locking up to M36 threads - may require heat to dismantle. Recommended primer: 7649. ORDER CODE

PACK TYPE

PACK SIZE

10LOC277-0.05L 10LOC277-0.25L

Bottle Bottle

50ml 250ml

$/100 10 1

10J.006 CRC 3.36 Lubricant High temperature threadlocker: good chemical resistance, suitable for sealing most refrigerants at high temperatures - applications above 150ºC. High strength for locking up to M36 threads. Recommended primer: 7471. ORDER CODE

PACK TYPE

PACK SIZE

10LOC272-0.05L

Bottle

50ml

$/100 10

Thread Sealing Use Thread Sealer to replace use of hemp, tapes and paste. Loctite sealants: ensure complete contact between threads; provides a 100% seal; will not creep, shrink or block systems and filters by shredding; and, disassembly can be achieved easily with normal tools.

10J.007 Loctite 55 Thread Sealant Can be safely applied on metal and plastic threaded fittings and when pressure exceeds 300kPa. Cord type: 80gm = 150mtr - maximum thread size: 6”. Low disassembly strength. ORDER CODE

PACK TYPE

PACK SIZE

10LOC55-0.08

Bottle

80gm

$/100 12

10J.008 Loctite 5331 Thread Sealant Recommended for use on threaded plastic or plastic/metal fittings carrying hot or cold water, e.g. industrial and agricultural plastic water pipe systems or drainage systems. Curing gel type - maximum thread size: 3”. Low disassembly strength. Cannot be used if pressure exceeds 300kPa. ORDER CODE

PACK TYPE

PACK SIZE

10LOC5331-0.1L

Tube

100ml

$/100 10

10J.009 Loctite 542 Thread Sealant Recommended for use on hydraulic/pneumatic coarse threaded metal fittings. Curing liquid type - maximum thread size: 3/4”. Medium disassembly strength. Recommended primer: 7471. ORDER CODE

PACK TYPE

PACK SIZE

10LOC542-0.01L 10LOC542-0.05L

Bottle Bottle

10ml 50ml

10.054

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 10 10


10: LOCTITE

10J.010 Loctite 569 Thread Sealant Recommended for use on hydraulic/pneumatic fine threaded metal fittings. Curing liquid type - maximum thread size: 3/4”. Low/medium disassembly strength. Recommended primer: 7471. ORDER CODE

PACK TYPE

PACK SIZE

10LOC569-0.05L 10LOC569-0.25L

Bottle Bottle

50ml 250ml

$/100 10 10

10J.011 Loctite 577 Thread Sealant General purpose recommended for use on coarse threaded metal fittings in low temperature applications, requiring fast cure, e.g. outdoor plant maintenance. Curing gel type - maximum thread size: 3”. Medium/high disassembly strength. Recommended primer: 7649. ORDER CODE

PACK TYPE

PACK SIZE

10LOC577-0.05L 10LOC577-0.25L

Tube Tube

50ml 250ml

$/100 10 1

10J.012 Loctite 567 Thread Sealant Slow cure recommended for use on coarse threaded metal fittings where prolonged time frame is required for adjusting valves and fittings. Curing gel type - maximum thread size: 3”. Low/medium disassembly strength. Recommended primer: 7649. ORDER CODE

PACK TYPE

PACK SIZE

10LOC567-0.05L 10LOC567-0.25L

Tube Tube

50ml 250ml

$/100 10 1

Gasketing - Sealing of Flanges Use gasket and flange sealant with no shimming effect - controlled tolerances, no need for re-torquing. Fills all voids - reduces the need for a fine surface finish of flanges. Parts can be disassembled easily, even after extended surface. Resists high pressure when fully cured.

10J.013 Loctite 515 Flange Sealant Recommended for coating and re-using existing gaskets to improve sealing, and where gaskets are used as a shim. Use on rigid flange type, has excellent oil resistance, anaerobic cure method, two hour seal (low pressure), excellent water/glycol resistance. Recommended primer: 7649. ORDER CODE

PACK TYPE

PACK SIZE

10LOC515-0.05L 10LOC515-0.30L

Tube Cartridge

50ml 300ml

$/100 10 10

10J.014 Loctite 518 Gasket Eliminator Recommended for use on rigid iron, steel and aluminum flanges, e.g. aluminium gearboxes and engine castings, etc. - seals gaps up to 0.5mm. Use on rigid flange type, has excellent oil resistance, anaerobic cure method, 30 minute seal (low pressure), good water/glycol resistance. Recommended primer: 7649. ORDER CODE

PACK TYPE

PACK SIZE

10LOC518-0.025L 10LOC518-0.05L 10LOC518-0.30L

Tube Tube Cartridge

25ml 50ml 300ml

$/100 10 10 1

Adelaide 08 8396 2781

10.055 © 2011 ALLFASTENERS


10: LOCTITE 10J.015 Loctite 510 Flange Sealant Recommended for use on rigid metal parts, e.g. cast iron components and pump housings, etc. - has high temperature and chemical resistance - seals gaps up to 0.5mm. Use on rigid flange type, has excellent oil resistance, anaerobic cure method, two hour seal (low pressure), excellent water/glycol resistance. Recommended primer: 7471. ORDER CODE

PACK TYPE

PACK SIZE

10LOC510-0.05L 10LOC510-0.25L

Tube Tube

50ml 250ml

$/100 10 1

10J.016 Loctite 5910 Black Maxx® Silicone Flange Sealant Replacement for cork and paper cut gaskets on flanges and stamped sheet metal covers. Fast cure, use for sealing gaps greater than 0.5mm. Recommended for use where high vibration or flexing occurs - can be used with plastic parts. Use on flexible flange type, has excellent oil resistance, moisture cure method, 20 minute seal (low pressure), good water/glycol resistance, 45 minute tack free time. ORDER CODE

PACK TYPE

PACK SIZE

10LOC5910-0.095

Tube

95gm

$/100 12

10J.017 Loctite 587 Blue Maxx® Silicone Flange Sealant Recommended for sealing all types of flanges, including stamped sheet metal where high flexibility and high oil or water glycol resistance is required - use for sealing gaps greater than 0.5mm. Use on flexible flange type, has excellent oil resistance, moisture cure method, 45 minute seal (low pressure), good water/glycol resistance, 45 minute tack free time. ORDER CODE

PACK TYPE

PACK SIZE

10LOC587-0.085 10LOC587-0.37

Tube Cartridge

85gm 370gm

$/100 12 12

10J.018 Loctite 5920 Copper Maxx® Silicone Flange Sealant Single component RTV non-sag silicone paste for low volatility applications - adheres to metal, glass, natural and synthetic fibres, wood, ceramics and many plastic substrates. Use for sealing gaps of greater than 0.5mm, and in applications of high temperatures - up to 316ºC. Use on flexible flange type, has good oil resistance, moisture cure method, 30 minute seal (low pressure), good water/glycol resistance, 30 minute tack free time. ORDER CODE

PACK TYPE

PACK SIZE

10LOC5920-0.085

Tube

85gm

Your fasten one-stop er sho p!

10.056

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

$/100 12

e Australia-wsid, deliverie anywhere, anytime...

SYDNEY 1300 255 327


10: LOCTITE

Gasketing - Sealing of Flanges Use gasket and flange sealant with no shimming effect - controlled tolerances, no need for re-torquing. Fills all voids - reduces the need for a fine surface finish of flanges. Parts can be disassembled easily, even after extended surface. Resists high pressure when fully cured.

10J.019 Loctite 660 Retaining Compound Use for repairing badly worn coaxial parts without remachining - enables re-use of worn bearing seats, keys, splines, tapers, or for retaining shims. High strength, 30 minutes approx. handling strength, gap filling up to 0.5mm. Recommended primer: 7471. ORDER CODE

PACK TYPE

PACK SIZE

10LOC660-0.006L 10LOC660-0.05L

Tube Tube

6ml 50ml

$/100 10 10

10J.020 Loctite 641 Retaining Compound Recommended for parts that will need subsequent dismantling, e.g. retention of bearings onto shafts and into housings. Medium strength, 30 minutes approx. handling strength, gap filling up to 0.2mm. Recommended primer: 7649. ORDER CODE

PACK TYPE

PACK SIZE

10LOC641-0.01L 10LOC641-0.05L 10LOC641-0.25L

Bottle Bottle Bottle

10ml 50ml 250ml

$/100 10 10 1

10J.021 Loctite 620 Retaining Compound Recommended for high temperature (up to 230ÂşC) retaining of parts with a clearance or interference fit, e.g. retaining bushes, bearings, seals, fans and liners. High strength, 1 hour approx. handling strength, gap filling up to 0.25mm. Recommended primer: 7649. ORDER CODE

PACK TYPE

PACK SIZE

10LOC620-0.05L 10LOC620-0.25L

Bottle Bottle

50ml 250ml

$/100 10 1

10J.022 Loctite 680 Retaining Compound Gives best resistance to dynamic, axial and radial loads - recommended for retaining shafts, gears, pulleys and similar cylindrical parts. High strength, 30 minutes approx. handling strength, gap filling up to 0.2mm. Recommended primer: 7471. ORDER CODE

PACK TYPE

PACK SIZE

10LOC680-0.05L 10LOC680-0.25L

Bottle Bottle

50ml 250ml

$/100 10 1

Make an investment CALL US ICE! FOR SERV Adelaide 08 8396 2781

10.057 Š 2011 ALLFASTENERS


10: LOCTITE 10J.023 Loctite 609 Retaining Compound Recommended as a general purpose, low viscosity retaining compound - use to bond rotors to shafts, secure bushings and sleeves, augment press fits. Medium/high strength, 30 minutes approx. handling strength, gap filling up to 0.2mm. Recommended primer: 7471. ORDER CODE

PACK TYPE

PACK SIZE

10LOC609-0.01L 10LOC609-0.05L 10LOC609-0.25L

Bottle Bottle Bottle

10ml 50ml 250ml

$/100 10 10 1

Instant Bonding Use Loctite Instant Adhesives - fixtures in seconds, clear bond line - goods cosmetic appearance. Versatile - dissimilar materials can be bonded, high strength - often giving a bond stronger than the materials being bonded, and, small parts bonding.

10J.024 Loctite 401 Instant Adhesive General purpose for bonding most substrates such as plastics, rubber, metals, card and wood. Also recommended for rapid bonding of ‘difficult to bond’ Santoprene® rubbers or polyolefin plastics and elastomers, when used in conjunction with Loctite 770 polyolefin primer. Up to 80ºC operating temperature, approx. 5-20 seconds fixture time, viscosity mPa.s: 110. ORDER CODE

PACK TYPE

PACK SIZE

10LOC401-0.01L 10LOC401-0.025L 10LOC401-0.5L

Bottle Bottle Bottle

100ml 25ml 500ml

$/100 1 12 1

10J.025 Loctite 406 Instant Adhesive Rapid bonding of Santoprene® rubbers (including EPDM), and polyolefin plastics and elastomers, when used in conjunction with Loctite 770 polyolefin primer. Up to 80ºC operating temperature, approx. 5-20 seconds fixture time, viscosity mPa.s: 20. ORDER CODE

PACK TYPE

PACK SIZE

10LOC406-0.01L 10LOC406-0.025L 10LOC406-0.5L

Bottle Bottle Bottle

100ml 25ml 500ml

$/100 1 12 1

10J.026 Loctite 454 Instant Adhesive General purpose gel for bonding metals, composite materials, wood, cork, foam, leather, card, paper, plaster and unglazed ceramics - recommended for use on vertical or overhead surfaces. Non-drip/non-run, fills gaps to 0.5mm with the use of primer 7452. Up to 80ºC operating temperature, approx. 5-20 seconds fixture time. ORDER CODE

PACK TYPE

PACK SIZE

10LOC454-0.02 10LOC454-0.2

Tube Tube

20gm 200gm

10.058

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327

$/100 10 1


10: LOCTITE

10J.027 Loctite 480 Instant Adhesive Black, rubber toughened grade for bonding metal to metal and metal to rubber - especially suitable with applications where high peel strength is required and/or shock loads are present. Up to 100ºC operating temperature, approx. 20-120 seconds fixture time, viscosity mPa.s: 300. ORDER CODE

PACK TYPE

PACK SIZE

10LOC480-0.025L 10LOC480-0.5

Bottle Bottle

25ml 500gm

$/100 12 1

10J.028 Loctite 416 Instant Adhesive Specially formulated for rough irregular surfaces, applications requiring higher viscosity and slower fixturing speeds. Up to 80ºC operating temperature, approx. 20-50 seconds fixture time, viscosity mPa.s: 1500. ORDER CODE

PACK TYPE

PACK SIZE

10LOC416-0.025L

Bottle

25ml

$/100 1

For a range of Anti-Seize Lubricants, see this section, page 10.049

We have thee most flexibl em t delivery sys! - try us

Surface Preparation - Activators & Primers

Accelerate cure of Loctite products, even at low temperatures. Provide adhesion to non-wetting surfaces.

10J.029 Loctite 7649 Activator Use to increase the cure speed of Loctite anaerobic products, especially at low temperatures, in applications with passive metals or inert surfaces, or where large gaps are involved. Use in conjunction with Loctite: 262, 277, 290, 620, 641, 515, 518, 542, 567, 577. ORDER CODE

PACK TYPE

PACK SIZE

10LOC416-0.025L

Bottle

25ml

$/100 1

10J.030 Loctite 7471 Activator Use to increase the cure speed of Loctite anaerobic products, especially at low temperatures, in applications with passive metals or inert surfaces, or where large gaps are involved. Use in conjunction with Loctite: 222, 243, 272, 609, 660, 680, 510, 569. ORDER CODE

PACK TYPE

PACK SIZE

10LOC7471-0.125 10LOC7471-2L

Aerosol Can Tin

125gm 2ltr

$/100 12 1

Activator 7075 available for use with structural adhesives. For further information contact our sales team.

Adelaide 08 8396 2781

10.059 © 2011 ALLFASTENERS


10: LOCTITE 10J.031 Loctite 7452 Accelerator Speeds cure of Loctite cyanoacrylate (instant) adhesives - use before or after adhesive application. Use when securing wires to coils or PCB’s, tamperproofing adjustments, mounting edge guides, stiffeners, etc. ORDER CODE

PACK TYPE

PACK SIZE

10LOC7452-0.02 10LOC7452-1L

Aerosol Can Tin

20gm 1ltr

$/100 10 1

10J.032 Loctite 7025 Activator Use where increased cure speed of Loctite cyanoacrylate (instant) adhesives is required, especially on irregular surfaces like wood or stone, where large localised bond gaps may exist. ORDER CODE

PACK TYPE

PACK SIZE

10LOC7025-0.1L

Spray Bottle

100ml

$/100 10

10J.033 Loctite 7025 Activator Polyolefin primer - improves adhesion to difficult-to-bond materials, such as polypropylene, polyethylene, PTFE and thermoplastic rubber. Use in conjunction with Loctite instant adhesives, including: 401, 406, 416, 454, 480. ORDER CODE

PACK TYPE

PACK SIZE

10LOC770-0.1L 10LOC770-1L

Spray Bottle Tin

100ml 1ltr

$/100 10 1

Structural Bonding Bonds a wide variety of materials such as wood, metals, hard plastics and glass. Provides a tough and resilient joint - high shear and peel strength. For the range of structural bonding adhesives available, Contact our sales team for more information.

Lubrication - Anti-Seize & Dry Film Prevents seizing and galling during assembly and operation. Inhibits corrosion and oxidation in chemically and thermally aggressive environments. Prevent wear and cold welding during assembly and operation. For more information on the Loctite range of Anti-Seize Lubricants, Contact our sales team.

A All Fa F = steners ! 10.060

MELBOURNE 03 9330 0555 © 2011 ALLFASTENERS

SYDNEY 1300 255 327

Can’t find it?e It may still b LL A available - C US!


Sealents, Adhesives, Paints, Cleaners & Lubricants