Page 1

STAGE WASH PR-3060 This product manual contains important information about the safe installation and use of this projector. Please read and follow these instructions carefully and keep this manual in a safe place for future reference.

PR LIGHTING LTD. Yingbin Road, Dashi Panyu, Guangzhou, 511430 China http://www.pr-lighting.com


INDEX SAFE USAGE OF THE PROJECTOR

3

INSTALLING THE PROJECTOR

4

FITTING/REPLACING THE LAMP

5

KEEPING THE PROJECTOR CLEAN

6

TECHNIC DATA

6

Please note that as part of our ongoing commitment to continuous product development, specifications are subject to change without notice. Whilst every care is taken in the preparation of this manual we reserve the right to change specifications in the course of product improvement. The publishers cannot be held responsible for the accuracy of the information herein, or any consequence arising from them. Every apparatus has been tested completely and packed properly by the manufacturer. Please make sure the packing and / or the apparatus is in good condition before your installation and use. Should there be any damage caused by transportation, consult your dealer and do not use the apparatus. But any damage caused by improper use will not be assumed by the manufacturer and / or dealer.

ACCESSORIES THESE ITEMS ARE PACKED TOGETHER WITH THE PROJECTOR Brackets (1PCS) Nuts (2PCS) Angle-adjusting knobs/washers (2PCS respectively) Square screws (2PCS) Safety cord (1PCS) Power plug (1PCS) This manual (1PCS)

INTRUDUCTION Thank you for purchasing our product Stage Wash, PR-3060. This product manual contains important information about the safe installation and use of this projector. Please read and follow these instructions carefully and keep this manual in a safe place for future reference. The Stage Wash is an innovative projector with an elegant housing made of high quality aluminium alloy with an epoxy paint finish. The Stage Wash complies to CE norms and standards. The Stage Wash employs LYW2000W lamp whose life is 20% longer than that of universal 2000W lamp with a rise of 30% in brightness. The projector adopts the excellent multi-surfaces cold light reflector placed of a high quality reflective layer, which can lower the temperature in projector effectively. The Stage Wash can sit horizontally and be hanged with an adjustable projection, and various color filters can be mounted with splendid and beautiful beams which can pierce the air distantly, so it is suitable for many indoor applications, especially for TV station, disc, singing and dancing stage, and nightclub, etc.

2/8

stage wash manual.doc


SAFE USAGE OF THE PROJECTOR When unpacking and before disposing of the package check there is no transportation damage before using the projector. Should there be any damage caused by transportation, consult your dealer and do not use the apparatus. Keep the package well for your possible future transportation. The projector is for indoor use only, IP 20. Use only in dry locations. Keep this device away from rain and moisture, excessive heat, humidity and dust. Do not allow to contact with water or any other fluids, or metallic objects. The projector is not designed or intended to be mounted directly on to inflammable surfaces. The projector is only intended for installation, operation and maintenance by qualified personnel. The projector must be installed in a location with adequate ventilation, at least 50cm from adjacent surfaces. Be sure that all the cooling fans run normally and no ventilation slots are blocked. Do not project the beam onto inflammable surfaces, minimum distance is 5m.

5m

Avoid direct exposure to the light from the lamp. The light is harmful to the eye. Do not attempt to dismantle and / or modify the projector in any way. Electrical connection must only be carried out by qualified personnel. Before installation, ensure that the voltage and frequency of power supply match the power requirements of the projector. Only use the lamp with the specified type and rating. It is essential that each projector is correctly earthed and that electrical installation conforms to all relevant standards. Do not connect this device to any dimmer pack. Make sure that the power-cord is never crimped or damaged by sharp edges. Never let the power-cord come into contact with other cables. Only handle the power-cord by the plug. Never pull out the plug by tugging the power-cord. Keep the lamp clean. Do not touch the lamp glass with bare hand. Never run the projector without a lamp. There are no user serviceable parts inside the projector, do not open the housing and never operate the projector with the covers removed.

Always disconnect from the mains, when the device is not in use or before cleaning it or before attempting to do any maintenance work. If you have any questions, don’ t hesitate to consult your dealer or manufacturer.

3/8

stage wash manual.doc


INSTALLING THE PROJECTOR

Stage Wash is for sitting or hanging up installation. When you are going to hang it up, use M10 screws to fix the bracket on structure please. And loosen the angle-adjusting knob a little to adjust the projective direction. Always ensure that the structure which you are going to mount the projector is secure and is strong enough to support a weight of 10.7kg each Stage Wash.

Note: For safety reason please employ the safety cord attached in the package and pass it through the safety ring for auxiliary installation.

4/8

stage wash manual.doc


FITTING/REPLACING THE LAMP

Turn the lamp access door 90°in the clockwise direction and open the lamp access door. Loosen 2 lampholder screws a bit and turn the lampholder a little, then pull it out. Fit/replace the lamp.

Note: Turn the focusing knob to adjust the focus and the beam angle. Note: Always turn off the device, when it is going to be fitted/replaced. And cool the worn-out lamp before replacing. Keep the lamp clean and don’t attach the bulb by bare hand.

5/8

stage wash manual.doc


KEEPING THE PROJECTOR CLEAN To ensure the reliability of the projector it should be kept clean. The lens and multi-surfaces reflector should be regularly cleaned to maintain an optimum light output.

Do NOT use any type of glass solvent or detergent on multi-surfaces reflector. Do NOT use tissue and hard paper/cloth to clean the multi-surfaces reflector. Please dismantle the lens first for convenience when you are about to clean the reflector. And engage the glabrous cloth dipped with weak soap lye to clean it gently. Then use the clean and wet glabrous cloth to mop the soap lye off. Cleaning frequency depends on the environment in which the fixture operates: damp, smoke or particularly dirty surroundings can cause greater accumulation of dirt on the unit’ s optics. A typical glass cleaning products should be used in cleaning. It is recommended to clean the external optics at least once every 20 days and clean the internal optics at least once every 30 / 60 days.

Do NOT use any organic solvent, e.g. alcohol, to clean the housing of the apparatus.

TECHNICAL DATA VOLTAGE:

230V AC 50Hz

POWER CONSUMPTION:2000W LAMP:

LYW 2000W HALOGEN LAMP COLOR TEMPERATURE:3150゜K LAMPHOLDER:G22

BEAM ANGLE:20°~ 28° (Adjustable by hand) WEIGHT:

10.7Kg

DIMENSIONS:

6/8

stage wash manual.doc


LIGHT OUTPUT

      7/8

stage wash manual.doc


PR LIGHTING LTD. Yingbin Road, Dashi, Panyu, Guangzhou, China Post-Code: 511430 TEL: 020-8478-1888 FAX: 020-8478-6023

P/N: 321010163 Last Revision: 16: 01: 2004

8/8

stage wash manual.doc

pr-3060  
Read more
Read more
Similar to
Popular now
Just for you