LYNX Touch Installation and Setup Guide
Programming the Control SCREEN Phone Type None
Communicator Type None
ACTION Select “Phone Type”. The System displays the following options: None Contact Id: 4 Digit Contact Id: 10 Digit SIA Select “Communicator Type”. The System displays the following options: None GSM or IP Note: The system will display the communications path (GSM or IP) selected in Communications Programming. The path can be enabled for either primary Central Station or Secondary Central Station but not both. If it is enabled in one it will not be available for the other Central Station.
Phone Number
Account Number FFFF Dynamic Priority Redundant Reports Dynamic Delay 30 Seconds
Report All Press to Report All
If any option other than “None” is selected in “Phone Type”, the “Phone Number” option will be displayed. Select “Phone Number”. Enter the Secondary Central Station Phone Number on the displayed keypad. (Up to 20 digits) If any option other than “None” is selected in “Phone Type” The “Account Number” option will be displayed. Select “Account Number”. Enter the Secondary Central Station Account Number on the displayed keypad. If any option other than “None” is selected in “Communicator Type” The “Dynamic Priority” option will be displayed. “Select “Dynamic Priority”. The system scrolls between “Redundant Reports”, “Preferred Telco” and Preferred Radio”. If any option other than “Redundant Reports” is selected in “Dynamic Priority” The “Dynamic Delay” option will be displayed. “Select “Dynamic Delay”. The system scrolls between “15 Seconds”, “30 Seconds”, “60 Seconds” and “90 Seconds”. Note: If GSM is selected as the primary reporting channel Dynamic Delay should be set to minimum of 60 seconds. Select “Report All”. The System toggles between “Press to Report All” and “Report All Set”. If “Report All” is selected all reporting options will be “Enabled”. Select the “Save” key to return to the Reporter options screen.
Report Alarms Enabled
Select “Report Alarms”. The System toggles between “Disabled” and “Enabled”.
Report Troubles Enabled
Select “Report Troubles”. The System toggles between “Disabled” and “Enabled”.
Report Open/Close Disabled
Select “Open/Close”. The System toggles between “Disabled” and “Enabled”.
Report Tests Enabled
Select “Report Tests”. The System toggles between “Disabled” and “Enabled”. SIA: The LYNX Touch SIA default is “Enabled” and is not selectable.
Follow Me Phone 1 Phone Type None Phone Number
Report All Press to Report All
Select “Follow Me Phone 1” to program the “Follow Me” Reminder telephone number 1
Select “Phone Type”. The System toggles between “None” and “Follow Me”. Select “Phone Number”. Enter the “Follow Me” Phone Number 1 on the displayed keypad.
Select “Report All”. The System toggles between “Press to Report All” and “Report All Set”. If “Report All” is selected all reporting options will be “Enabled”. Select the “Save” key to return to the Reporter options screen.
Report Alarms Disabled
Select “Report Alarms”. The System toggles between “Disabled” and “Enabled”.
Report Troubles Disabled
Select “Report Troubles”. The System toggles between “Disabled” and “Enabled”.
- 35 -