Issuu on Google+

5870API Wireless Indoor Asset Protection Sensor Quick Intallation Guide Step 1. Select Location

Gun Case/Safe

Large Screen TV

Paintings

Computers

Jewelry Box

Avoid sources of vibration (i.e. speakers, fans, motors) Choose a stable, clean, flat surface Mount in an inconspicuous area

Valuables

Step 2. Select Operating Mode LOOP 1 is for High Security (Fast Trigger) applications and should ONLY be used if the asset will NOT be subject to external vibration. Loop 2 (Standard Security mode) should be used in most cases. FAULT

LOOP 1 Painting

LOOP 3

30

O

OR

1-3 Seconds

High Security (Fast Trigger) Mode (Loop 1)

Jewelry Box 30

O

Greater than 30

O

LOOP 3

5-8 Seconds

Standard Security Mode (Loop 2)

Step 3. Program Device SENSOR

PULL TO CONNECT BATTERY

1. Pull tab to activate battery

Step 4. Install Device

Tilt Mode (Loop 3) 2. Enter Zone Number, Zone Type and Input Type at keypad

TAB Pull tab

Enroll Serial Number (press tamper switch)

Enter Loop Number at keypad (use Loop 2 unless Fast Trigger or Tilt is required) Peel here (Asset) Mounting Surface

2. Peel tape backing before installing. Place onto asset.

1. Clean mounting surface 3. Rotate into position L/5870APIQIGF/D March 2009 Š 2009 Honeywell International Inc.

NORMAL

MOUNT HORIZONTALLY ONLY (LOOP 3 ONLY)

LOOP 2 Large Screen TV

LOOP 3

30

O

4. Press down firmly for five seconds.

Step 5. Test System


Honeywell 5870API Quick Install Guide