Page 1

Sirocco 2x1000w halogen Versatile lighting balloon > The simplest Airstar, the inventor and world leader of lighting balloon technology, offers a complete range of products to meet all your construction lighting needs. Airstar lights are diffused, glare-free and illuminate a 360° area.

The Sirocco 2x1000w halogen lighting balloon is designed to offer an easy and efďŹ cient lighting solution. This is the simplest and most versatile product of the Sirocco range.

OF ALL THE BALLOONS


Sirocco 2x1000w halogen -

Versatile lighting balloon

SELF-INFLATING LIGHTING BALLOON > Quick and easy to set up > Efficient: diffuses a powerful soft light due to halogen lamps > Versatile: can be mounted on a stand or adapted to any equipment > Lightweight: packed into a container, small enough to be carried in a car

The balloon - 110cm (3.6ft) in diameter - Self-inflated by an internal fan - The integrated reflector offers optimal light output - The elliptical shape offers a higher wind resistance: up to 100km/h (62 mph) - A stem at the base of the envelope is used to adapt the balloon to a stand The light The balloon offers an optimal light between 2.5 and 5m (8.2ft / 16.4ft)

Safety and reliability - IP53 balloon - The texture of the envelope is non flammable - The volume of the balloon keeps the envelope cold and allows to handle it without being burnt - A safety system switch turns the power off if the internal pressure is reduced Easy transport and storage - In a plastic cylinder: 110*30*30cm (3.6*1*1ft) - Total weight of the balloon: 8kg (17.6lbs) Electrical features

230v

100v/120v

Type of lamp holder R7s R7s R7s Lamps 2x1000w 2x1000w Type of lamps Halogen Halogen Power cables 3G1.5 3G2.5 Average lamps life 300h 300h Power supply protection 1x10A fuse 1x20A fuse Efficiency 27Lm/w 27Lm/w Required generator 2.4kw 2.4kw

Light under the balloon at a 5-m (16.4ft) height Lighted area with at least 10 lux Maximum lumen Color temperature

282Lx

282Lx

Mounting option - Telescopic pole in chrome steel to mount the balloon on an equipment - Telescopic stand + tripod or flat stem for stand alone on the ground Available accessories

500m² 5400sq.ft 54000Lm 3200°K

500m² 5400sq.ft 54000Lm 3200°K

Quick and easy set up - Plug - The balloon inflates and lights in 45 seconds - Set up time is 5 minutes maximum for one person

-

Bag for envelope storage Ballast sandbag White envelope Inverted envelope Oversized envelope for a logo Pack of lamps Titling head device

100% recycled paper - vegetable-based inks

Lighted area

R7s R7s 230v 100v/120v 1500m² 1500m² 16200sq.ft 16150sq.ft


Sirocco 1000w HTI Versatile lighting balloon > The resistance Airstar, the inventor and world leader of lighting balloon technology, offers a complete range of products to meet all your construction lighting needs. Airstar lights are diffused, glare-free and illuminate a 360° area.

The Sirocco 1000w HTI lighting ballon is designed to be more durable on a worksite. Due to its technical features, it can be used longer than the other balloons from the Sirocco range.

product tested by

TĂœV OF ALL THE BALLOONS


Sirocco 1000w HTI -

Versatile lighting balloon

SELF-INFLATING LIGHTING BALLOON > Quick and easy to set up > Efficient and strong: due to the UV-resistant envelope and long-life HTI lamps with a strong mechanical resistance > Versatile: can be mounted on a stand or adapted to equipment > Lightweight: packed into a container, small enough to be carried in a car Safety and reliability

- 110cm (3.6ft) in diameter - Self-inflated by an internal fan - The integrated reflector offers an optimal light output - The elliptical shape offers a higher wind resistance: up to 100km/h (62mph) - A stem at the base of the envelope is used to adapt the balloon to a stand - An integrated titling head device can direct the balloon The light The balloon offers an optimal light between 2.5 and 5m (8.2ft / 16.4ft)

Lighted area

2200m² 23700sq.ft Light under the balloon at a 5-m (16.4ft) height 420Lx Lighted area with at least 10 lux 650m² 7020sq.ft Maximum lumen 80000Lm Color temperature 4000°K Quick and easy set up - Works with a 1000w magnetic ballast - The balloon inflates in 45 seconds - The light switches on automatically once the balloon is inflated - Set up time is 5 minutes maximum for one person

- IP54 balloon - The texture of the envelope is non flammable - The volume of the balloon keeps the envelope cold and allows to handle it without being burnt - A safety system switch turns the power off if the internal pressure is reduced Easy transport and storage In a plastic cylinder: 110*30*30cm (3.6*1*1ft) + 1 carton for the ballast: 30*20*17cm (1*0.6*0.5ft) for the 230v version 48*30*30cm (1.5*1*1ft) for the 100v, 110v and 120v versions - Total weight of the balloon: 8kg (17.6lbs) + magnetic ballast: 230v:12kg (26.4lbs), 100/110/120v: 20kg (44lbs) Electrical features Type of lamp holder Lamps Type of lamps Power supply Power cables Power supply protection Efficiency Fire up time Restrike time Ignition voltage

E40 1x1000w HTI (Metal Halide) 100v, 110v, 120v, 230v 3G1.5 1x10A fuse 80Lm/w 3 to 5 minutes 10 to 15 minutes 4 to 5 kv

Mounting option - Telescopic pole in chrome steel to mount the balloon directly on an equipment - Telescopic stand + tripod or flat stem for stand alone on the ground Available accessories - Bag for envelope storage - Ballast sandbag - White envelope - Inverted envelope - Oversized envelope for a logo - Spare lamp

100% recycled paper - vegetable-based inks

The balloon


Sirocco 1200w HMI Versatile lighting balloon > The most effective Airstar, the inventor and world leader of lighting balloon technology, offers a complete range of products to meet all your construction lighting needs. Airstar lights are diffused, glare-free and illuminate a 360° area.

The Sirocco 1200w HMI lighting balloon is speciďŹ cally designed to provide a high level of light. It allows a daylight effect, due to the color temperature of the lamp.

OF ALL THE BALLOONS


Sirocco 1200w HMI -

Versatile lighting balloon

SELF-INFLATING LIGHTING BALLOON > Quick and easy to set up > Efficient: high light quality due to a color rendering index (CRI) of 100%. It allows less down-time due to its hot restrike system > Versatile: can be mounted on a stand or adapted to equipment > Lightweight: packed into a container, small enough to be carried in a car Safety and reliability The balloon - 110cm (3.6ft) in diameter - Self-inflated by an internal fan - The integrated reflector offers optimal light output - The elliptical shape offers a higher wind resistance: up to 100km/h (62 mph) - A stem at the base of the envelope is used to adapt the balloon to a stand The light The balloon offers an optimal light between 2.5 and 5m (8.2ft / 16.4ft)

- IP53 balloon - The texture of the envelope is non flammable - The volume of the balloon keeps the envelope cold and allows to handle it without being burnt - A safety system switch turns the power off if the internal pressure is reduced Easy transport and storage - In a plastic cylinder: 110*30*30cm (3.6*1*1ft) + 1 plastic case for the ballast: 81*44*31cm (2.6*1.4*1ft) - Total weight of the balloon: 8kg (17.6lbs) + magnetic ballast 230v: 28kg (61.7lbs) + electronic ballast: 7.5kg (16.5lbs) Electrical features

2500m² 30000sq.ft Light under the balloon at a 5-m (16.4ft) height 560Lx Lighted area with at least 10 lux 700m² 7560sq.ft Maximum lumen 110000Lm Color temperature 5600°K Quick and easy set up - Works with a 1200w magnetic or electronic ballast - The balloon inflates in 45 seconds - The lights are controlled from a switch on the ballast - Set up time is 10 minutes for one person

G38 1x1200w HMI 208v, 230v 3G1.5 750h 1x10A fuse 92Lm/w 2 to 3 minutes < 1 minute 25 to 45 kv

Mounting option - Telescopic pole in chrome steel to mount the balloon directly on an equipment - Telescopic stand + tripod or flat stem for stand alone on the ground Available accessories - Bag for envelope storage - Ballast sandbag - White envelope - Inverted envelope - Oversized envelope for a logo - Spare lamp - Titling head device

100% recycled paper - vegetable-based inks

Lighted area

Type of lamp holder Lamps Type of lamps Power supply Power cables Average lamps life Power supply protection Efficiency Fire up time Restrike time Ignition voltage


Mobilux

- 4x1000w Halogen

Mobile and autonomous lighting system > The ready-to-use all-in-one Airstar, the inventor and world leader of lighting balloon technology, offers a complete range of products to meet all your construction lighting needs. Airstar lights are diffused, glare-free and illuminate a 360° area.

The Mobilux is a lighting system especially designed for the rental market. The combination of a traditional lighting tower with an Airstar lighting balloon makes this unit extremely mobile.

product tested by

TĂ&#x153;V OF ALL THE BALLOONS


Mobilux -

4x1000w Halogen

AUTONOMOUS MOBILE LIGHTING SYSTEM > All-in-one: cart+balloon+mast > less handling: less maintenance > Quick and easy set up: ready in 2 minutes by only one user > Mobile, autonomous: to move forward or backwards while unit is lit, release brake and push > The light of an Airstar balloon with 4x1000w: power, comfort and safety over 3000m² (32300sq.ft)

... The cart - Handlebars to drive one directional axle - All-ground pneumatic wheels - Footbrake - 4 jacks > mobile, handy and sturdy - Compact cart - Area occupied on the ground: 1.11m² (11.9sq.ft) - With the jacks spread: 3.8m² (40.9sq.ft) - Weight of the cart alone (incl. mast): 85kg (187lbs) > Easy to transport (on a van or on a trailer) Designated space for the generator ... The mast - Telescopic mast with a crank > easy and safe - 4 sections of 1m (3.3ft) in stainless steel > avoid rust and corrosion > resistant and sturdy ... The balloon - Tubular shape: the light output remains homogeneous even when moving away from the balloon - The integrated reflector offers an optimal light output - Self-inflated by an internal fan - The integrated titling head device makes the storage easy - Diameter of the envelope: 100cm (3.3ft) - Height of the envelope: 70cm (2.3ft) - Weight of the balloon (incl. cable): 20kg (44lbs) … Service Airstar is a full-service company To meet your needs, we provide you a serial number, dimensions for transport, an instructions leaflet, a maintenance diary and a repair kit.

The lignt - Multiple-lamps system (Airstar exclusive): 4x1000w halogen in 2 independent circuits - Lights up to 3000m² (32300sq.ft) - 210 lux under the balloon at a 5-m (16.4ft) height - Maximum lumen: 108000Lm - Color temperature: 3200°K

Ready in 2 minutes Raise the mast, turn on the generator, switch the balloon on - Self-inflating - The lights are controlled by two switches - The off switch has a 5-seconds delay Safety and reliability - IP54 balloon - The texture of the envelope is non flammable - The volume of the balloon keeps the envelope cold and allows to handle it without being burnt - A safety system switch turns the power off if the internal pressure is reduced - The Mobilux is designed to resist winds up to 80km/h (49.7mph) Electrical features Type of lamp holder Lamps Power supply Power cables Average lamps life Power supply protection Efficiency Plug

Available accessories - White envelope - Spare lamp

R7s 4x1000w 12x1.5 mm² 115v, 230v 300h 10A (230v)/ 20A (115v) 27Lm/w 2x16A (230v) 2x5A (115v) single phase

100% recycled paper - vegetable-based inks

Everything is designed to satisfy the user...


Sirocco 3x1000w HTI Balloon to light large areas > The multiple lamps Airstar, the inventor and world leader of lighting balloon technology, offers a complete range of products to meet all your construction lighting needs. Airstar lights are diffused, glare-free and illuminate a 360° area.

The Sirocco 3x1000w HTI lighting balloon is specifically designed to be used on large worksites. Due to its technical features and the multiple-lamps system, it can be used longer, with more illumination than other balloons of the Sirocco range.

product tested by

TÜV OF ALL THE BALLOONS


Sirocco 3x1000w HTI -

Balloon to light large areas

BALLON ÉCLAIRANT AUTOGONFLANT > Efficient and durable: with a UV-resistant envelope and long-lasting HTI lamps > Easy to use: the operating height of this balloon makes it easy to set on standard masts

The balloon

Safety and reliability

- 110cm (3.6ft) in diameter 140cm (46ft) in height - Self-inflated by an internal fan - The integrated reflector offers optimal light output - Due to its tubular shape, the light output remains homogeneous even when moving away from the balloon - A stem at the base of the envelope is used to adapt the balloon to a stand

- IP54 balloon - The texture of the envelope is non flammable - The volume of the balloon keeps the envelope cold and allows to handle it without being burnt - A safety system switch turns the power off if the internal pressure is reduced

The light The balloon offers an optimal light at 8m (26ft)

Easy transport and storage - In a plastic cylinder: 115*55*50cm (3.7*1.8*1.6ft) + 3 small cartons for the ballasts: 30x20x17cm (1*0.6*0.5ft) for the 230v version 48x30x30cm (1.6*1*1ft) for the 100v & 120v versions - Total weight of the balloon: 30kg (66lbs) + magnetic ballasts: 230v: 36kg (79lbs) 100/ 120v: 60kg (132lbs) Electrical features

Lighted area

6500m² 70000sq.ft Light under the balloon at a 5-m (16.4ft) height 390Lx Lighted area with at least 10 lux 3200m² 34500sq.ft Maximum lumen 300000Lm Color temperature 4000°K Quick and easy set up - The balloon is connected to a control box connected to 3 1000w magnetic ballasts - The balloon inflates in 3 minutes once plugged - The lamps can be switched on independently - The balloon is ready to use in about 8 minutes. The total set up depends on the mast you choose

E40 3x1000w that can be switched on separately Type of lamps HTI Power cables 12 G1.5 ower supply 100v,120v, 230v Average lamps life 6000 h Power supply protection 1x10A fuse (230v) 1x20A fuse/ track (100v, 120v) Efficiency 100Lm/w Fire up time 3 to 5 min Restrike time 10 to 15 min Ignition voltage 4 to 5kv Required generator 9kva single phase Mounting option - Standard mast of 8m (26ft) - Motorized Cart800 Available accessories - Bag for envelope storage - Ballast sandbag - White envelope - Spare lamp

100% recycled paper - vegetable-based inks

Type of lamp holder Lamps


Sirocco 4000w HMI Balloon to light large areas > The most powerful Airstar, the inventor and world leader of lighting balloon technology, offers a complete range of products to meet all your construction lighting needs. Airstar lights are diffused, glare-free and illuminate a 360째 area.

The Sirocco 4000w HMI is the most powerful and offers the highest quality of light in the Sirocco range. Its HMI lamps offer the highest illumination output with the best color temperature.

OF ALL THE BALLOONS


Sirocco 4000w HMI -

Balloon to light large areas

SELF-INFLATING LIGHTING BALLOON > Efficient: it offers an incomparable quality of light due to a color rendering index (CRI) of 100%. Its quick hot restrike system allows minimal downtime > Easy to set up: lights the same area as a traditional lighting tower using less equipment and manpower for setup

The balloon

Safety and reliability

- 220cm (7.2ft) in diameter - Self-inflated by an internal fan - The integrated reflector offers optimal light output - The elliptical shape offers a higher wind resistance: up to 100km/h (62 mph) - A stem at the base of the envelope is used to adapt the balloon to a stand or a tower

- IP53 balloon - The texture of the envelope is non flammable - The volume of the balloon keeps the envelope cold and allows to handle it without being burnt - A safety system switch turns the power off if the internal pressure is reduced

The Light The balloon offers an optimal light between 10 and 15m (33ft / 49ft)

Easy transport and storage - In a flight case: 120*50*65cm (3.9*1.6*2ft) + one pallet for the ballast: 72x47x68cm (2.4*1.5*2.2ft) - Total weight of the balloon: 55kg (121lbs) + ballast: 73kg (160.9lbs) Electrical features

10000m² 107640sq.ft Light under the balloon at a 15-m (49ft) height 172Lx Lighted area with at least 10 lux 3200m² 34500sq.ft Maximum lumen 380000Lm Color temperature 6000°K

G38 1x4000w HMI 5G2.5 +3 x2 100v, 120v, 230v 500h 16-25A breaker 95Lm/w 2 to 3 min 3 to 6 min 45 to 55 Kv

11.25kva

Mounting option - Mast, lighting tower, crane, trailer > to set the balloon at a 12m (39.4ft) height minimum

Quick and easy set up

Available accessories

- The balloon is connected to a 4000w magnetic ballast - The balloon inflates in 5 minutes (1 plug + 1 circuit-breaker on the ballast) - The light is controlled by a switch on the ballast - The balloon is ready to use in about 10 minutes. The total set up depends on the mast you choose

- Bag for envelope storage - Ballast sandbag - White envelope - Spare lamp

100% recycled paper - vegetable-based inks

Lighted area

Type of lamp holder Lamps Type of lamps Power cables Power supply Average lamps life Power supply protection Efficiency Fire up time Restrike time Ignition voltage Required generator


Sirocco Open 1000w or 3x1000w type

new

> Make your lighting towers more efficient Airstar, the inventor and world leader of lighting balloon technology, offers a complete range of products to meet all your construction lighting needs. Airstar lights are diffused, glare-free and illuminate a 360° area.

The Sirocco Open is a lighting balloon specifically designed to replace the traditional floodlights on a lighting tower. The balloon operates with any type of ballasts whatever the voltage is.

OF ALL THE BALLOONS


Sirocco Open -

1000w ou 3 x 1000w type

The Sirocco Open is sold without ballast: the idea is to connect it to the integrated ballast of your lighting tower The Sirocco Open is made of a Sirocco envelope, a grid to protect the lamps and an electronic box > One cable links the box to the generator > Another cable links the box to the ballasts

The balloon - Self-inflated by an internal fan - Elliptical shape (Ø 110cm/ 3.6ft) for the 1000w version - Tubular shape (Ø 110cm/ 3.6ft - H 140cm/ 4.6ft) for the 3x1000w version - The integrated reflector offers optimal light output - A stem at the base of the envelope is used to adapt the balloon to a stand The light The envelopes are made of complex fabrics for durability. Due to this, the diffused light is efficient, powerful and glare-free over 360° areas.

Safety and reliability - IP54 balloon - The texture of the envelope is non flammable - The volume of the balloon keeps the envelope cold and allows to handle it without being burnt - A safety system switch turns the power off if the internal pressure is reduced - Wind resistance: 100km/h (62.5mph) for the 1000w version; 50km/h (31mph) for the 3x1000w version Easy transport and storage 1000w version: - In a flight case: 110*30*30cm (3.6*1*1ft) - Total weight of the balloon: 8kg (17.6lbs) 3x1000w version: - In a carton: 115*55*50cm (3.8*1.8*1.6ft) - Total weight of the balloon: 30kg (66lbs) Electrical features (examples) Type of lamp holder Possible lamps

Example of illumination with a 1000w HTI Venture lamp when the balloon is at a 5m (16.4ft) height

E40

max max 1000w HTI 3x1000w HTI Power cables 3G1.5 12G1.5 Power supply 100v, 120v, 230v Power supply protection 1x10A fuse (230v) 1x20A fuse (100v), 1x15A fuse (120v) Efficiency 80Lm/w 100Lm/w Fire up time 3 to 5 min Restrike time 10 to 15 min Ignition voltage 4 to 5kv

Example of illumination with 3 1000w HTI Radium lamps when the balloon is at a 8m (26ft) height

Quick and easy set up - The 1000w-type balloon inflates in 45 seconds and the 3x1000w-type balloon inflates in 3 minutes - The light is controlled by a switch on the control box

Available accessories - White envelopes (1000w and 3x1000w) - Inverted envelope - Oversized envelope for a logo (1000w) - Titling head device

100% recycled paper - vegetable-based inks

Example of ballasts and lamps with which the balloon can suit: In Japan: lamps MT1000 B/BH Ø max. 80mm IWASAKI ballast M10BCAP1A60 IWASAKI (100v) In the USA: lamps S1000W/ HOR/ T25 VENTURE ASNI M47 ballast V94E6550 outdoor cwi VENTURE (120v/ 240v)


TBT 3x65w halogen 12v Low voltage lighting balloon The autonomous light Airstar, the inventor and world leader of lighting balloon technology, offers a complete range of products to meet all your construction lighting needs. Airstar lights are diffused, glare-free and illuminate a 360° area.

The Sirocco TBT 3x65w halogen 12v is a low voltage lighting balloon specifically designed to work in small and confined places. The TBT 12v works off batteries. It is compact and mobile, especially when carried as a backpack, allowing the user to see, to be seen and to work hands free.

OF ALL THE BALLOONS


TBT 3x65w halogen 12v -

Low voltage lighting balloon

SELF-INFLATING LIGHTING BALLOON > Mobile and compact: ideal to light small areas > All-purpose 12v: can be connected to a vehicle’s battery

The balloon

Safety and reliability

- 50cm (1.6ft) in diameter - Self-inflated by an internal fan - The integrated reflector offers optimal light output - The elliptical shape offers a better wind resistance: up to 30km/h (18.6mph) - A stem at the base of the envelope is used to adapt the balloon to the stand sold with it

- IP53 balloon - The texture of the envelope is non flammable - The volume of the balloon keeps the envelope cold and allows to handle it without being burnt - A safety system switch turns the power off if the internal pressure is reduced - Low voltage = safety - Noise level: 44dB Easy transport and storage

The light The balloon offers an optimal light at 2m (6.5ft)

- In a plastic case: 52*32*23cm (1.7*1*0.75ft) - Total weight of the balloon: 2.65kg (5.8lbs) Electrical features

Quick and easy set up - Automatically inflates in 45 seconds once plugged - Lights once inflated from a switch at the base of the balloon - Set up time is 5 minutes maximum for one person

Mounting option - Pole made of 5 clipsable sections of 50cm (1.6ft) in stainless steel for stand alone on the ground = can also be adapted on a backpack especially designed for this balloon Available accessories - Black backpack with one big pocket, 2 zippers and spaces to insert the pole - Pack of 1x12v-17Ah battery with connectors - Clips to connect directly to the battery of a vehicle - White envelope - Inverted envelope - Spare lamp

100% recycled paper - vegetable-based inks

Lighted area 200m2 (2150sq.ft) Light under the balloon at a 2-m (6.5ft) height 140Lx Lighted area with at least 10 lux 60m2 (646sq.ft) Maximum lumen 5250Lm

Made of one supply circuit for 3 65w commutable lamps Type of lamp holder G6.35 Type of lamps Halogen IRC Power cables 2x4² Power supply 12v Average lamps life 4000h Power supply protection 1x25A fuse battery Efficiency 27Lm/w


TBT 2x250w halogen 24v Low voltage lighting balloon The on-board lighting Airstar, the inventor and world leader of lighting balloon technology, offers a complete range of products to meet all your construction lighting needs. Airstar lights are diffused, glare-free and illuminate a 360° area.

The Sirocco TBT 2x250w halogen 24v is a low voltage lighting balloon especially designed to work off equipmentsâ&#x20AC;&#x2122; own power supply. The TBT 24v works on autonomous batteries, or on the battery or generator of a heavy vehicle. It is a very compact and mobile light.

OF ALL THE BALLOONS


TBT 2x250w halogen 24v -

Low voltage lighting balloon

SELF-INFLATING LIGHTING BALLOON > Efficient: less powerful than the standard Sirocco, however it avoids setting a generator on a machine that is equipped with a 24v power supply > Useful: works on AC current as well as DC current

The balloon

Safety and reliability

- 55cm (1.8ft) in diameter - Self-inflated by an internal fan - The integrated reflector offers optimal light output - The elliptical shape offers a better wind resistance: up to 30km/h (18.6mph) - A stem at the base of the envelope is used to adapt the balloon to the stand sold with it - 1 connector plugs to the battery

- IP53 balloon - The texture of the envelope is non flammable - The volume of the balloon keeps the envelope cold and allows to handle it without being burnt - A safety system switch turns the power off if the internal pressure is reduced - Noise level: 44dB

The light The balloon offers an optimal light at 3m (9.8ft)

Easy transport and storage - In a plastic case: 81*45*33cm (2.6*1.5*1.1ft) - Total weight of the balloon: 12kg (26.4lbs) Electrical features Type of lamp holder Type of lamps Power cables Power supply Average lamps life Power supply protection Efficiency Mounting option - 3-section pole in stainless steel > to set the balloon directly on a heavy vehicle - Pole made of 5 clipsable sections of 50cm (1.6ft) in stainless steel for stand alone on the ground = can also be adapted on a backpack especially designed for this balloon

Quick and easy set up - Automatically inflates in 45 seconds once plugged - The balloon lights automatically once inflated - Set up time is 5 minutes maximum for one person

Available accessories - 24v battery for autonomous use - 1 24v/ 2-clips euro plug to connect on a heavy plant - White envelope - Inverted envelope - Spare lamp

100% recycled paper - vegetable-based inks

Lighted area 450m2 (4850sq.ft) Light under the balloon at a 2-m (6.5ft) height 261Lx Lighted area with at least 10 lux 160m2 (1720sq.ft) Maximum lumen 18000Lm Theoretical color temperature 3200°K

G6.35 Halogen 4x2.5 24v 300h 1x25A breaker 36Lm/w


Stands Airstar, the inventor and world leader of lighting balloon technology, offers a complete range of products to meet all your construction lighting needs. Airstar lights are diffused, glare-free and illuminate a 360° area.

Airstar mounting systems from 2 to 8m (6.6 to 26.4ft) can be put on the ground or fixed directly onto any piece of equipment.

P500T

Item

P500TH

P500TA

P300C

Description

Telescopic pole

Telescopic stand with flat foot

Telescopic stand with a tripod

3 tubes column

Made of

4 sections with a thrust for more safety

One telescopic column + one heavy flat foot with a Ø45mm (1.8“) tube

One telescopic stand with and integrated tripod

3 sections of 1m (3.3ft)

Materials and finishing

In chrome steel: for rust and corrosion resistance

Foot in coated steel: protection against oxidation

In chrome steel: for rust and corrosion resistance

Foot in coated steel: protection against oxidation

Ø 61cm/2ft

Ø 196cm/6.43ft

Area on the ground Min./ max. height

199cm/ 550cm 6.5ft/ 18ft

199cm/ 550cm 6.5ft/ 18ft

199cm/ 530cm 6.5ft/ 17.4ft

100cm/ 300cm 3.3ft/ 9.8ft

Height once folded

154cm/ 5ft

157cm/ 5.2ft

182cm/ 6ft

100cm/ 3.3ft

Weight of the material

8kg/ 17.6lbs

23kg/ 50.7lbs

16kg/ 35.2lbs

3kg/ 6.6lbs

Weight supported by the material

40kg/ 88.2lbs

40kg/ 88.2lbs

40kg/ 88.2lbs

25kg/ 55.1lbs

The advantages

Clip in aluminium

The foot has a cross head on the top to make the stand safer

Airstar branded Clamp collar at the base of the stand to have an additional safety system The foot can be adjusted depending on the ground Ring to fix the rigging of the balloons

The sections are integrated with each others and some spring catch guarantee the stability of the stand

Use

To set up the balloon on moving equipment

Compact stand on Easy-to-use stand the ground. No ballast is needed. Ideal to put the stand against a safety fence

To use the TBT 24v on a moving equipment


Stands

P300CL

Cart800

Description

3 tubes heavy stand

3 tubes light stand

Motorized trolley

Made of

1 3-tubes column + 1 heavy flat foot with a 30mm (1.2“) diameter tube

1 3-tubes column, 1 union piece and 3 sections for the foot

1 5-sections telescopic mast with a crank, integrated to a motorized trolley

Materials and finishing

The foot is in coated steel: protection against oxidation

Coated steel: protection against oxidation

Stainless steel

Area on the ground Ø 61cm/ 2ft

Ø105cm/ 3.4ft

Without jacks: 155cm²/ 16.68sq.ft - With jacks: 425cm²/ 45.75sq.ft

Min. / max. height

100cm/ 3.3ft - 300cm/ 9.9ft

100cm/ 3.3ft - 300cm/ 9.9ft

190cm/ 6.2ft - 825cm/ 27ft

Height once folded

100cm/ 3.3ft

100cm/ 3.3ft

190cm/ 6.2ft

Weight of the material

21kg/ 46.3lbs

6kg/ 13.2lbs

110kg/ 242.5lbs

Weight supported by the material

25kg/ 55.1lbs

25kg/ 55.1lbs

60kg/ 132.3lbs

The advantages

The heavy foot reinforces the stability of the pole

Light and very compact

- Handlebars to drive one directional axle - All-ground pneumatic wheels - Footbrake - 2 jacks

Use

Ideal to use the TBT 24v on the ground

To use the TBT 24v indoor Mobile, handy and stable For an outdoor use, you have = to use the big balloons to rig the stand such as Sirocco 4000w HMI or Sirocco 3x1000w HTI

100% recycled paper - vegetable-based inks

P300CH

Item


Accessories MAGNETIC BALLASTS This type of ballast is commonly used for industrial applications where a regulated light output is not that important. This ballast limits the current in the lamp; a capacitor reduces consumption while working. However, the quality of the light depends on the quality of the main power supply.

100v and 120v

4000w magnetic ballast

1200w magnetic ballast

1000w magnetic ballast Voltage

230v

Dimensions

30x20x17cm 4 8 x 3 0 x 3 0 c m 8 1 x 4 5 x 3 3 c m 8 1 x 4 5 x 3 3 c m 72x47x68cm 2.66*1.48*1.1ft 2.66*1.48*1.1ft 2.3*1.5*2.2ft 0.98*0.66*0.56ft 1.57*1*1ft

Weight

12kg/ 26.5lbs

20kg/ 44lbs

Description Once connected to the ballast and to the main supply, the balloon inflates and lights automatically without any switch.

230v

28kg/ 61.7lbs

100v and 120v

42kg/ 92.6lbs

An ON/OFF switch allows you to turn on the unit. The ballast is hot restrike which is ideal to save time at the jobsite.

230v

73kg/ 160.9lbs 2 wheels under pressure, a bar to carry it and a bar to transport it on a pallet make it easy to move. This ballast works with a circuit breaker and control buttons.

WHITE ENVELOPE Depending on the worksite (tunnels, under bridges, etc.), it can be used to illuminate below as well as above the balloon. In this case, there is not reflector inside the balloon.

INVERTED ENVELOPE The bottom of the balloon is the part with the reflector. The light is reflected to the top.

OVERSIZED ENVELOPE The envelope has no more elliptical but more cylinder shape, which allows to put logos on it*. This area can be used to put the logo of the company or warning signs at the beginning and at the end of the worksite. * We make and apply the logos upon request.


Accessories BACKPACK FOR SIROCCO TBT 12V Black backpack to carry the batteries and the balloon. There is a special space to put two 12v batteries. A special space is also designed to insert the poles.

TITLING HEAD DEVICE Sold separately for the Sirocco 1200w HMI and 2000w Halogen (included with the Sirocco 1000w HTI). This allows you to have directional lighting.

LAMPS To always have lamps in stock. Sold in packs of 6 or 24 units: E40 2000w Ha for Sirocco 2000w Ha Sold single: R7s 1000w Ha lamp for Sirocco 2x1000w Ha or Mobilux 1000w HTI lamp for Sirocco 1000w HTI 1200w HMI lamp for Sirocco 1200w HMI 1000w HTI lamp for Sirocco 3x1000w HTI

100w Ha 12v lamp for Sirocco TBT 2x100w Ha 12v 65w 12v Ha lamp for Sirocco TBT 3x65w Ha 12v 250w 24v Ha lamp for Sirocco TBT 2x250w Ha 24v

BALLAST SANDBAG It is used for ballasting the balloon and ensuring a greater stability to it.

100% recycled paper - vegetable-based inks

4000w HMI lamp for Sirocco 4000w HMI

Sirocco Catalogue  

Full range of Sirocco balloons for industry market.

Read more
Read more
Similar to
Popular now
Just for you