Issuu on Google+

Dear Sir Ideally, working in the Engineering field will allow me the opportunity to utilize my experience in conducting and controlling the functions which I gained through working in manufacturing atmosphere and I would like to be part of an organization that offers potential growth, advancement opportunities and stability. For your convenience; I have attached my resume for your review. Realizing the limitations of the written page in presenting my qualifications and I would welcome the opportunity to participate in a personal interview to answer any of your questions and better present my qualifications. Thank you for your time and consideration Sincerely,

Eng. Ahmed Mohamed Mohamed Medany

Page 1 of 7


Ahmed Mohamed Mohamed Medany Address: in Egypt, 35 Kafr Tohormos St. / Faysal st. – Giza In Saudi Arabia,Yanbu Cement Company Colony-yanbu El bahr Tel: +966-2456982

(Home)

Mobile: +0020122994674 E-mail address: medany_84@yahoo.com

OBJECTIVE Seeking a challenging position in the Quality Control and Quality Assurance of Tanks Construction, Pressure Vessels Fabrication, Piping work and Steel work in a company, which is dynamic and progressive, a position where hard workers are recognized developed and rewarded. PERSONAL INFORMATION • • • •

Nationality: Egyptian Date of Birth: 1/7/1985 Marital Status: Single Military Service: Completed

EDUCATION • • • •

Bachelor of Engineering, Faculty of Engineering Cairo University, Department of Metallurgical Engineering. Year of graduation: 2007 Grade: Good Project grade: Distinction

PROJECT OF GRADUATION The Influence of Organic Inhibitors in Hydrochloric Acid Pickling Process on: •

Corrosion Damage.

Hydrogen Damage.

TRAINING EXPERIENCES 1/9/2005 till 30/9/2005

KHALDA PETROLUIM COMPANY Page 2 of 7


Training: •

Corrosion Control.

Cathodic protection.

Inspection by Ultrasonic and Radiographic methods.

15/8/2006 till 30/8/2006 •

ORASCOM COMPANY

Training: • •

Welding Processes. Inspection by Ultrasonic method.

TECHNICAL QUALIFICATION •

IWE (INTERNATIONAL WELDING ENGINEER) FROM IIW (INSTITUTE OF INTERNATIONAL WELDING ).

Qualified in NDT level II in accordance with ASNT: o

Liquid Penetrant Test (PT),

o

Magnetic Particle Inspection (MT),

o

Ultrasonic Test (UT) &

o

Radiographic Testing Method (RT).

o

Visual Examination Method (VT).

SKILS 1. Computer Skills: • Excellent command of MS Office, I have very good internet skill & Good knowledge in using AutoCAD. 2. Language Skills: • Arabic (Mother Tongue) & Good command of spoken and written English. PERSONAL FEATURE • • • •

Presentation skills Working under pressure Problem solving skills Decision-making skills Page 3 of 7


• •

Analytical skills Multi-task ability

PROFESSIONAL EXPERIENCE Employer: ( DSD FERROMETALCO ) Period: Aug-2007 till Feb-2009 My Job Title: Welding Engineer.

Tasks and Duties: •

Very good experience in pipe line, piping work & preparation of all project documents approved with third party.

Working by a lot of International Codes and Standards (ASME IX, V, ASME VIII Dev.1, II, ASME B31.3, AWS D1.1 & AWS A5 series for filler metals.

Inspection & Quality checking of incoming / outgoing material.

Handling Third Party (LLOYD’s REGISTER) Inspections (Material inspection, as per client specifications, marking, color coding checking …etc.)

Handling Non confirmation reports (NCR) of discrepant material.

Handling non-confirmation reports (NCR) of any workshop / field activities according to client specification, applied codes and standards.

Following up with suppliers / manufacturers / clients to resolve the NCR issues.

Coordinating with internal purchasing, and finance departments for quick delivery of material at clients end and to resolve NCR related issues.

Creating awareness to meet quality objectives, ISO 9001, health, safety and environment through different Medias such as banners, slogans etc.

Conducting internal Quality Audit as per quality manual.

Maintenance and update of quality manual as per ISO 9001 guidelines.

I have good practical field experiences in different welding processes.

Preparation of PQRs and WPSs as per project requirement. Page 4 of 7


Welders’ performance qualification, welders ID card, daily welding progress reports and welders’ acceptable percentage reports.

Visual Inspection of welded joints.

Interpretation of Radiographs of welded joints in accordance with applied codes.

Witness for MT & PT workshop & field welded joints.

Good experience in (UT) angular beam and lamination detection.

Preparation of Inspection Testing Plan (ITP) & procedures of project according to client specification.

Coordination of client, third party & subcontractors.

Review documents and final inspection of project.

Inspection and dimension control of structures in pre-fabrication and erection as per drawing, client specification & ITP.

Employer: SHOTMED

Engineering Company

Project: Pipe Line Corridor (PLC) Period: Feb-2009 till 31-5-2009 Client: TCI SANMAR CHEMICALS "Indian Company" Engineering Consultant: TECHNIP INDIA LTD Third Party: LLOYD's REGISTER My Job Title: QA/QC Engineer (Contractor Representative)

Tasks and Duties: •

Preparation of all project documents approved with third party.

Working by International Codes and Standards (ASME IX, V, ASME VIII Dev.1, ASME II, ASME B31.3, AWS D1.1 & AWS A5 series for filler metals).

Preparation of Inspection Testing Plan (ITP) & procedures of project according to Page 5 of 7


client specification. •

Preparation of PQRs and WPSs as per project requirement.

Welders’ performance qualification, welders ID card, daily welding progress reports and welders’ acceptable percentage reports.

Visual Inspection of welded joints.

Handling Third Party (LIOYD’s REGISTER) Inspections (Material inspection, as per client specifications, marking, color coding checking …etc.)

Interpretation of Radiographs of welded joints in accordance with applied codes.

Witness for MT & PT workshop & field welded joints.

Coordination of client, third party & subcontractors.

Inspection and dimension control of structures in pre-fabrication and erection as per drawing, client specification & ITP.

Inspection & Quality checking of incoming / outgoing material.

Handling Non confirmation reports (NCR) of discrepant material.

Handling non-confirmation reports (NCR) of any workshop / field activities according to client specification, applied codes and standards.

Following up with suppliers / manufacturers / clients to resolve the NCR issues.

I have good practical field experiences in different welding processes.

Good experience in (UT) angular beam and lamination detection.

Coordinating with internal purchasing, and finance departments for quick delivery of material at clients end and to resolve NCR related issues.

Creating awareness to meet quality objectives, ISO 9001, health, safety and environment through different Medias such as banners, slogans etc.

Conducting internal Quality Audit as per quality manual.

Maintenance and update of quality manual as per ISO 9001 guidelines.

Review documents and final inspection of project.

Page 6 of 7


Employer: Yanbu Cement Company Period: July-2009 till now My Job Title: Welding Engineer .

Tasks and Duties: •

Supervisor for all welding job in the plant.

Maintenance and update spares for desalination plant.

Workshop activity like machining,fabrication,and maintenance of gear boxes,blowers,compressors,and Pumps.

Page 7 of 7


cariculam vitei