Issuu on Google+

Building Automation Systems Empower BA Systems with Open & Web-enabled Technologies

SCADA/ HMI

WebAccess

WebView 1261/ 660

Browser-based HMI/SCADA Software

Web-enabled Touch HMI

u Redundant SCADA and COM ports u View, control, configure system remotely over internet/

u Super slim and compact design with Al-Mg housing u WinCE 5.0 platform inside u Supports vector-based graphic, auto fit into LCD size u View, control, configure system remotely over internet/

intranet using ordinary web browser u Supports LonWorks LNS and BACNet IP u Global access to alarm & data

intranet using ordinary web browser

WebAccess Energy Management Function (Optional) u Consumption management-analysis u Cost / budget analysis u Equipment maintenance

Controllers

BAS-3520/3512

WebLink-2170

Web-enabled DDC controller

Web-enabled Communication gateway

u Remote programing and maintenance through

u Configure system remotely over internet/intranet using

Ethernet u Fuzzy PID control u Built-in BA domain function such as scheduler, HVAC calculation, sequential control, ... etc. u Local Alarm and Event

ordinary web browser u RS-485 port with auto flow control u Multi-thread communication, fast response

I/O Expansion Modules

BAS-3018/ 3024 8-ch UI /4-ch UI, 4-ch AO, 4-ch DO Expansion Module u Acts as local I/O or Remote I/O u 16 bits universal input, Âą0.1% of FSR u 12 bits analog output, Âą0.1% of FSR

BAS-3050/ 3051 8-ch DI, 8-ch DO/16-ch DI Expansion Module u Acts as local I/O or Remote I/O u Supports 1KHZ counter input and 1KHZ frequency input

(any two channels) u Supports PWM output (any 4 channels)


Human Machine Interfaces Driving the Human Machine Interface Evolution

Touch Panel Computers

TPC-30T/TPC-32T

Industrial Monitors

TPC-66T/TPC-68T

3.5” QVGA TFT LCD XScale PXA270 Touch Panel Computer with CAN-bus (TPC-32T)

5.6" QVGA CSTN/TFT LCD XScale PXA270 Touch Panel Computer with CAN-bus (TPC-68T)

u Intel PXA270 processor on board u 3.5” QVGA TFT LCD u Super slim and compact design with plastic housing u Built-in flash memory and Windows CE OS u Automatic data flow control RS-485

u Intel PXA270 processor on board u 5.6" QVGA color STN/TFT LCD u Super slim and compact design with plastic housing u Built-in flash memory and Windows CE OS u Automatic data flow control RS-485

TPC-660E/TPC-662G

TPC-870H/TPC-1070H

FPM-5151G 15” XGA Industrial Monitor with Resistive Touchscreen, Direct-VGA, and DVI Ports u 15" XGA TFT LCD with resolution up to 1024 x 768 u Direct VGA & DVI-D video input interface u Front access USB connector u Flat-sealed front panel design u Combo RS-232 & USB interface for touchscreen (optional) u Supports industrial 10-30 VDC power input

FPM-5171G

5.7”/6.4" VGA TFT LCD Geode LX800 Touch Panel Computer with CAN-bus (TPC-662G)

8” VGA/ 10.4” SVGA TFT LCD Pentium M (TPC-1070H)/Celeron M Touch Panel Computer

17” SXGA Industrial Monitor with Resistive Touchscreen, Direct-VGA, and DVI Ports

u AMD Geode. LX800 processor on board u 5.7"/6.4" TFT LCD u One CompactFlash slot u Automatic data flow control RS-485 u Supports Microsoft Windows XP/CE and WinXPe

u Intel Pentium M Processor up to 1.4 GHz on board u 10.4" SVGA TFT LCD u Compact design with Die-Casting u Automatic data flow control RS-485 u Dual fast Ethernet supported u Supports Microsoft Windows XP/CE and WinXPe

u 17" SXGA TFT LCD with resolution up to 1280 x 1024 u Direct VGA & DVI-D video input interface u Flat-sealed front panel design u Front access USB connector u Combo RS-232 & USB interface for touchscreen (optional) u Supports industrial 10-30 VDC power input

Industrial Panel PCs

IPPC-6152A

Industrial Automation Computing Platform

IPPC-6172A

15” XGA TFT LCD Pentium M/Celeron M Industrial Panel PC with 2 x PCI Slots

17” SXGA TFT LCD Pentium M/Celeron M Industrial Panel PC with 2 x PCI Slots

u 15" XGA TFT LCD with touchscreen (optional) u Intel Pentium M up to 2.0GHz / Celeron M up to 1.5GHz u Offers two expansion slots for PCI add-on card u Dual Lan, supports one Gigabit Lan u Flat-Sealed front panel with USB access u Control Box with gull-wing design for easy

u 17" SXGA TFT LCD with touchscreen (optional) u Intel Pentium M up to 2.0GHz / Celeron M up to 1.5GHz u Offers two expansion slots for PCI add-on card u Dual Lan, supports one Gigabit Lan u Flat-Sealed front panel with USB access u Control Box with gull-wing design for easy

installation and maintenance

installation and maintenance

IACP-4000D 5.7” VGA TFT LCD Pentium 4/Celeron D 4U Industrial Workstation with 7 x ISA/ PCI Slots u 4U rackmount chassis supports ATX Industrial

Motherboard u 5.7" QVGA TFT-LCD with membrane keys provides

IPPC-7157A

IPPC-7158B

15” XGA TFT LCD Pentium D/Pentium 4/ Celeron D Industrial Panel PC with 7 x PCI/ PCIe Slots and Membrane Keypad

15” XGA TFT LCD Industrial Panel PC with 14 x ISA/PCI/PICMG Slots, Passive Backplane and Membrane Keypad

u Pentium D up to 3.2 GHz /Pentium 4 up to 3.8

u 15" XGA TFT LCD with touchscreen (optional) provides vivid, sharp images u Offers 14 expansion slots for PCI, PICMG and ISA u Detachable side-open front panel makes maintenance fast & easy u Programmable membrane function keys for varied application access u Heavy-duty design with anti-rust chassis with aluminum front panel which meet NEMA4/IP65 u One Front access USB 2.0 port

GHz / Celeron® D up to 3.06 GHz u 15" XGA TFT LCD with touchscreen (optional) provides vivid, sharp images u Offers 7 expansion slots for PCI and PCIe interface u Detachable side-open front panel makes maintenance fast &easy u Programmable membrane function keys with USB port access in front panel u Heavy-duty design with anti-rust chassis with aluminum front panel which meet NEMA4/IP65

enhanced monitoring & controlling capability for application u Heavy-duty design with anti-rust chassis with aluminum front panel which meet NEMA4/IP65 u Shock-resistant disk drive bay design holds up to three 5.25” and one 3.5” disk drives u Front LEDs indicate system health, such as power status, fan operation, in chassis temperature and HDD activity u Dual front-accessible filtered cooling fans provide optimal, streamlined airflow u Lockable front door prevents unauthorized access


Embedded Automation Computers Open and Robust Computing Power for Automation Applications

High Performance, Fanless Embedded Automation Computers with PC/104 Expansion

UNO-2170 Intel Celeron M UNO with 2 x LAN, 4 x COM, PC/104 u Onboard Celeron M 600MHz / 1GHz CPU u Provide 512KB battery-backup SRAM u 2 x RS-232, 2 x RS-232/422/485 with

automatic flow control u 2 x 10/100 Base-T Ethernet u Two USB and one type I/II PC Card slot u PC/104 expansion

UNO-2182

UNO-2172

Intel Pentium M UNO with 2 x LAN, 6 x COM, 16 x DI/O

u Onboard Pentium M 1.6 GHz or Celeron M 1.5 GHz u Provides 512KB battery-backup SRAM u 2 x RS-232 and 2 x RS-232/422/485 ports with automatic

u Onboard Pentium M 1.4 GHz or Celeron M 1.0 GHz u Provides 512 KB battery-backup SRAM u 2 x RS-232 and 4 x isolated RS-232/422/485 ports with

flow control

u 8-ch Digital Input and 8-ch Digital Output u 2 x 10/100Base-T RJ-45 ports u PC/104 expansion slots

Compact Fanless Embedded Automation Computers

Rackmount Fanless Embedded Automation Computers

UNO-2053E AMD GX2 UNO with 2 x LAN, 2 x COM, Audio

u Onboard Core 2 Duo 1.5 GHz u Provides 512 KB battery-backup SRAM u 2 x RS-232 and 2 x RS-232/422/485 ports with

u Onboard GX2 400MHz CPU u Two standard RS-232 and one DB-15 VGA port u Two 10/100 Base-T RJ-45 ports u Two USB and one type I/II PC Card slot u Audio with Mic in, Line in, Line out u Windows CE, XP Embedded and Linux ready solution

automatic flow control

automatic flow control

u 2 x 10/100/1000Base-T Ethernet u DVI-I supports dual display u PCI-104 expansion

Intel Core 2 Duo UNO with 2 x GbE, 4 x COM, DVI

u 2 x 10/100/1000Base-T Ethernet u DVI-I supports dual display u PCI-104 expansion

UNO-2176

Intel Pentium M UNO with 2 x GbE, 4 x COM, DVI

UNO-4678 Intel Celeron M UNO with 3 x LAN, 8 x COM, PC/104 u Onboard Celeron M 1 GHz processor supports 512 MB Memory u Supports Lm sensor which can retrieve CPU and board

temperature for monitoring purposes u 8 x isolated RS-232/422/485 ports with automatic flow control u 3 x 10/100Base-T RJ-45 ports u Supports two USB and 1 x type I/II CF card u Windows CE 5.0 and Windows XP Embedded ready solution u COM port Tx/Rx and LAN status LED indicators in front panel

Fanless Embedded Automation Computers with PCI Expansion

UNO-3072L

UNO-3074

UNO-3282

Intel Celeron M UNO with 2 x PCI slot

Intel Pentium M UNO with 4 x PCI, 1 x PC Card

Intel Core 2 Duo UNO with 2 x PCI, 2 x GbE

u Onboard Celeron M 1.0 / 1.5 GHz processor u Two RS-232 & two RS-232/422/485 ports with RS-485

u Onboard Pentium M 1.4 / 1.8GHz processor u Provides 512 KB battery-backup SRAM u Two 10/100Base-T RJ-45 ports and four USB ports u Four PCI-bus expansion slots for versatile applications u 4-ch isolated DI, 4-ch isolated DO with timer, counter

u Onboard Core 2 Duo L7400 1.5 GHz processor u Provides 512 KB Battery- backup SRAM u 2 x 10/100/1000 Base-T Ethernet and 5 x USB ports u 2 x PCI-bus expansion slots u Both DVI-D and VGA displays to support

and interrupt handling u Supports dual power inputs

u Front-accessible CompactFlash slot

automatic flow control u Two 10/100Base-T RJ-45 ports and four USB ports u Two PCI-bus expansion slots for versatile applications u 4-ch isolated DI, 4-ch isolated DO with timer,

counter and interrupt handling u Supports dual power inputs

dual display outputs

DIN-rail Fanless Embedded Automation Computers

UNO-1150 AMD GX2 UNO with 2 x LAN, 3 x COM, 2 x USB u Onboard AMD GX2 400 MHz u One RS-232 and two RS-232/422/485 ports with

automatic flow control u Two 10/100Base-T RJ-45 ports u Two USB, audio and CompactFlash u Compact size, small foot print, saves space and front accessible for easy wiring u DIN-rail design for easy installation in field cabinet

UNO-1170

UNO-1170E

Intel Pentium UNO with 2 x LAN, 3 x COM, 4 x USB

Intel Pentium UNO with 2 x LAN, 3 x COM, 4 x USB, PC/104+

u Onboard Celeron M 1.0 GHz or Pentium M 1.4GHz u Provides 512 KB battery-backup SRAM u Two RS-232 and one RS-232/422/485 ports with

u Onboard Celeron M 1.0 GHz or Pentium M 1.4GHz u Provides 512 KB battery-backup SRAM u Two 10/100Base-T RJ-45 ports u 3 x external USB and 1 x internal USB for dongle and

automatic flow control. u Two 10/100Base-T RJ-45 ports u 3 x external USB and 1 x internal USB for dongle

and flash drive

flash drive u PC/104+ expansion u DIN-rail design for easy installation in field cabinet


Industrial Communication Industrial Ethernet Switches with Redundant X-Ring

Managed Ethernet Switches EKI-7659C 8+2G Combo Port Gigabit Managed Redundant Industrial Ethernet Switch u 2 Gigabit Copper/SFP combo ports, plus 8

Fast Ethernet ports u IP30 robust mechanism and fanless design u Dual 12 ~ 48 VDC power inputs and 1 relay

EKI-4654R 24+2 SFP Port Managed Redundant Industrial Ethernet Switch u 2 SFP ports, plus 24 Fast Ethernet ports or

2 SFP ports, 8 Fast Ethernet ports plus 12 Single mode or Multi mode SC fiber optic connectors u 1U 19” rackmount, IP30 Robust mechanism and fanless design u Fully integrated, dual-redundant power input design: 2 x 100 ~ 240VAC/100 ~ 240VDC u Redundancy: Gigabit X-Ring (ultra highspeed recovery time<10 ms), RSTP/ STP (802.1w/1D) u IEC61850-3 and IEEE1613 compliance (ongoing) u Wide operating temperature: -40 ~ 85ºC

output u Redundancy: Gigabit X-Ring (ultra high-

speed recovery time<10ms), RSTP/STP (802.1w/1D) u Traffic QoS control, security, protection and seamless network management

EKI-7758F 8-port Gigabit Managed Redundant Industrial Ethernet Switch u All Gigabit Ethernet ports for 4 Copper and 4 SFP u IP30 robust mechanism and fanless design u Dual 12 ~ 48 VDC power input and 1 relay

output u Redundancy: Gigabit X-Ring (ultra high-speed

recovery time<10ms), RSTP/STP (802.1w/1D) u Traffic QoS control, security, protection and

seamless network management

Unmanaged Ethernet Switches EKI-2525

EKI-2728

5-port Unmanaged Industrial Ethernet Switch

8-port Gigabit Unmanaged Industrial Ethernet Switch

u 5 Fast Ethernet ports with Auto MDI/MDI-X u Slim size, IP30 metal mechanism and

u 8 Gigabit Ethernet ports with Auto MDI/MDI-X u Supports jumbo frame transmission up to

fanless design u Dual 12 ~ 48 VDC power input and 1 relay

output u DIN-rail/wallmount

9kbytes u Slim size, IP30 metal mechanism and

fanless design u Dual 12 ~ 48 VDC power input and 1 relay

output u DIN-rail/wallmount

Serial Device Servers EKI-1521/EKI-1522

EDG-4508(R)+/EDG-4516(R)+ 8/16-port RS-232/422/485 Multiport Serial Device Servers u 8/16-port RS-232/422/485 Serial communications u Supports 10/100Base-T Ethernet network u Supports Baud rates up to 230.4 kbps u Provides Virtual COM port, TCP Server/Client and

UDP operation modes u 4 x DI/O for alarm/event control u Provides rich configuration ways: Serial console Windows utility, and Web

EKI-1351/EKI-1352

1/2-port RS-232/422/485 Serial Device Servers

1/2-port RS-232/422/485 to 802.11b/g WLAN Serial Device Servers

u Supports 2 x 10/100Base-T Ethernet network to

u Supports 802.11g and 802.11b u Supports Wireless LAN Ad-Hoc and

establish dual redundant Ethernet connection u Provides COM port redirection (Virtual COM port), TCP Server/Client and UDP modes, Peer to Peer mode u Supports baud rates up to 921 kbps, total throughput up to 1.2M bps u Allows a max of 5 hosts to access one serial port u Allows to access a max of 16 hosts with TCP client for each serial port

Infrastructure modes u Supports baud rates up to 921 kbps,

total throughput up to 1.2M bps u Provides COM port redirection (Virtual COM port),

TCP Server/Client and UDP modes, peer to peer mode. u Allows to access a maximum of 4 host with TCP client mode u Allows a max of 5 hosts to access one serial port

Media Converters EKI-2541MI

EKI-2741LXI

10/100TX to Multi-mode Fiber Optic Industrial Media Converter with Wide Temp.

10/100/1000TX to Fiber Optic Gigabit Industrial Media Converter with Wide Temp.

u 1 x 10/100 Mbps Ethernet port with RJ45 connector u 1 x 100 Mbps multi-mode SC type fiber optic port u Link Fault Pass-through (LFP) Technology u Dual 12 ~ 48 VDC power input and 1 relay output u Slim size, DIN-rail/wallmount with IP30 metal

u 1 x 1000 Mbps Ethernet port with RJ45 connector u 1 x 1000 Mbps fiber port with SC connector for

mechanism u Wide operating tempurature: -40 ~ 75ºC

1000Base-LX device u Link Fault Pass-through (LFP) technology u Dual 12 ~ 48 VDC power input and 1 relay output u Slim size, DIN-rail/wallmount with IP30 metal

mechanism u Wide operating tempurature: -40 ~ 75ºC


Programmable Automation Controllers The New Generation of Programmable Automation Controllers

Controllers

I/O Modules ADAM-5240

ADAM-5550KW/5550CE 8-slot Programmable Automation Controllers u Designed for control tasks that meet robust and

computing performance requirements for PLC and Industrial PC’s u Can be operated with or without display/ keyboard/mouse u Remote monitoring through Web Server and Email Alarm u Remote maintenance via FTP Server u Supports Modbus/RTU Master and Modbus/TCP (Server/Client) Protocol u Supports HMI/SCADA u Supports Mobil SQL database u Supports SD Storage I/O modules u Supports AMONet Master modules u Supports Motion Control modules u Deterministic I/O at 1 ms (Local Rack) u Rich support to ADAM-5000 I/O Modules u ADAM-5550CE only supports .NET API Library

ADAM-5081

4-axis Stepping/Pulse-type Servo Motor Control Module

4-ch High Speed Counter/Frequency Module

u 1000 Vdc Photo coupler isolation and RC

u Supports Counter (up/down, bi-direction, up, A/B

filtering u 2/3-axis Linear Interpolation/2-axis Circular Interpolation u Range support ±2, 147, 483. 646 for each axis u Speed can be 1PPS ~ 4MPPS u Encoder Cycle with X1, X2 ,X4 (A/B phase only) u Pulse support Pulse/Direction(1-pulse, 1- direction type) Up/Down(2-pulse type) u External Signal supports nEXOP + and nEXOP

ADAM-5053S/5057S

Phase), Frequency u Auxiliary Function: Initial preset, hi-low alarm

setting, alarm digital output mapping, overflag u Input Frequency can support 5 Hz ~ 1 MHz

(Frequency mode) ; 1 MHz (Counter mode) u Supports 4 channels u Programmable Digital Filter 1 ~ 65000 μsec (Noise Filter)

ADAM-5091

32-ch Digital Input/Output Modules

4-port RS-232 Module

u High density of DI/O module u Life expectancy supports 1.7 x 105 at

u Supports 4 port RS-232 u Speed supports 50 ~ 115.2 kbps u UARTs has 1 x 16C954 (128-byte FIFO) u Data Signals include TxD, RxD, RTS, TS, DTR,

related load u Supports ADAM-5550 series u Relay Type for SPST (Form A) u Optical Isolation support 2500 VDC

DSR, DCD, RI, GND u Support standard COM Port with Interrupt

Remote I/O GCL and Peer-to-Peer Give Remote I/O Intelligence

Robust RS-485 I/O Modules ADAM-4117/4118 Robust Analog Input Module / Robust Thermocouple Input Module u Wide operating temperature -40 ~ 85ºC u 8 differential and independent

configuration channels u Supports Modbus/RTU protocol u High common mode voltage 200 VDC u 3000 VDC isolation protection u 1 kV surge, 3 kV EFT and 8 kV ESD protection

Programmable Communication Controllers ADAM-4150/4168 Robust DI/O Module / Robust Relay Output Module u Wide operating temperature -40 ~ 85ºC u 7 DI channels and 8 DO channels for

ADAM-4150 u 8 Form A relay output channels for ADAM-4168 u Supports Modbus/RTU protocol u 3000 VDC isolation protection u 1 kV surge, 3 kV EFT and 8 kV ESD protection

Intelligent Ethernet I/O Modules ADAM-6018 8-ch Isolated Thermocouple Input Module u Modbus/TCP, TPC/IP, UDP and

HTTP protocol u 8 Thermocouple Input and 8 DO channels u Embedded web server u Supports data stream and event trigger u Supports GCL and Peer-to-Peer

ADAM-4501/4502 Ethernet-enabled Communication Controller with 8-ch DI/O / 2-ch AI/O and 4-ch DI/O u 16-bit CPU with 1.5 MB flash memory,

640 kB SRAM u 1 x 10/100Base-T LAN and 4 x serial ports u HTTP server, FTP and e-mail function u Modbus/RTU and Modbus/TCP function libraries u Modularized I/O for future customization u Optional 4-digit 7-segment LED display

Intelligent Wireless I/O Modules ADAM-6060

ADAM-6050W

6-ch DI and 6-ch Relay Output Module

18-ch Wireless Isolated DI/O Module

u Modbus/TCP, TPC/IP, UDP and HTTP protocol u 6 DI channels (support counter and

u Supports IEEE 802.11b wireless LAN u Modbus/TCP, TPC/IP, UDP and HTTP protocol u 12 DI and 6 DO channels u Embedded web server u Supports data stream and event trigger u Supports Peer-to-Peer

frequency input) u 6 relay output channels (supports pulse output) u Embedded web server u Supports data stream and event trigger u Supports GCL and Peer-to-Peer


Data Acquisition & Control Outside the Box Data Acquisition Solutions

PCI-bus Data Acquisition & Control Cards

PCI-1715U

PCI-1718HDU/HGU

PCI-1671UP

500 kS/s, 12-bit, 32-ch Isolated Analog Input Universal PCI Card

100 kS/s, 12-bit, 16-ch Universal PCI Multifunction Card

High-Performance IEEE-488.2 Interface Universal PCI Card

u 2500 VDC isolation protection u 32 single-ended or 16 differential analog inputs, or a

u ISA-Compatible with PCL-818HD/818HG u 16 single-ended or 8 differential analog inputs u Automatic channel/gain scanning u Onboard FIFO memory (1024 samples) u One 12-bit analog output channel u 16 digital inputs and 16 digital outputs

u Complete Talker/Listener/Controller u Data transfer rates over 1.5 Megabytes/sec u 1024-word FIFO buffer u High-Speed State Machine Bus Manager u 7 Interrupt lines, shared interrupt capability u Transparent interrupt enabling/disabling

combination u Up to 500 kS/s sampling rate for A/D conversion u Programmable gain for each input channel u Onboard 1024 samples FIFO buffer u S/W, internal or external pacer sampling modes supported

AMONet Machine Control Box

AMAX-2750SY Series 32-ch Isolated Digital Input/ Output Slave Modules u DIN-rail mounting (L x W x H): 125 x 47.6 x 156 mm u Max. 20 Mbps transfer rate u Easy installation with RJ45 phone jack and LED diagnostic u LED indicator for each IO channel (Switch by SW4) u Selection of I/O-channel configuration

AMAX-2240 Series 4-axis AMONet Motion Slave Modules u Max. 20 Mbps transfer rate u Max. 6.5 Mhz, 4-Axes pulse output u 28 bits counter for incremental encoder u 2~4 axes Linear interpolation u 2 axes circular interpolation u Easy installation for servo or stepping motor driver

(32 DI, 32 DO or 16/16 DI/O) u 2500 Vrms Isolation voltage

GX2-400 Machine Control Box w/ AMONet Interface u Onboard AMD Geode™ GX2 processor, up to 256 MB

onboard DDR u 128 Kbyte battery backup RAM u Supports AMONet™ series for remote motion control and

data acquisition u Two RS-232 and One RS-422/485 ports with automatic

flow control

USB-based Data Acquisition & Control Modules

USB-4622

AMAX-2050KW

USB-4761

5-port USB 2.0 Hub

8-ch Relay and 8-ch Isolated DI USB Module

u 5 downstream USB 2.0 ports u Compatible with USB 2.0/1.1/1.0 u 480Mbps high-speed data transfer u LED indicator u Lockable USB cable u 10 ~ 30 VDC power input

u LED indicators to show activated relays u High-voltage isolation on input channels (2,500 VDC) u High ESD protection (2,000 VDC) u Wide input range (5 ~ 30 VDC) u Interrupt handling capability u Lockable USB cable for rigid connection

(power adapter not included*)

u One 10/100Base-T RJ-45 port and two USB ports u KW ready solution

MIC-3000 CompactPCI Series

MIC-3321 3U CompactPCI Pentium M 2.0G High-performance Controller u Mobile Intel 915GM express chipset u Supports up to 1GB DDR2 533/400 SDRAM soldered

on board

USB-4711A 150 kS/s, 12-bit, 16-ch Multifunction USB Module u 16 analog input channels u 12-bit resolution AI u Sampling rate up to 150 kS/s u 8 DI/8 DO, 2 AO and one 32-bit event counter u Wiring terminal on modules u Lockable USB cable for rigid connection

USB-4751 48-ch DI/O USB Modules u Emulates mode 0 of 8255 PPI u Buffered circuits for higher driving capacity than

8255 u Interrupt handling u Timer/Counter interrupt capability u 50-pin Opto-22 compatible box header u Lockable USB cable for rigid connection

u Extended operating temp: -25 ~ 70ºC

(Optional: MIC-3321C only) u Dual Giga LAN on PCI-Express u High-performance Intel Graphics Media Accelerator 900 VGA display u Rear I/O signal Supported for easy wiring


Building Automation Systems Empower BA Systems