Issuu on Google+

Tammermatic XJ-800 Brushless Drive-thru System for Large Vehicles


OVER 4000 LARGE VEHICLE INSTALLATIONS WORLD WIDE BY TAMMERMATIC VEHICLE LENGTH + 9000 2500

Equipment room installations:

VEHICLE LENGTH + 2000

3000

1 1. 2. 3. 4.

2

4400

4660

3

4100

2600

6 7

4

Guide rails Pivoting Snow removal / Pre-cooling arch Chassis washer Pivoting prewash arch

5. Oscillating and pivoting high-pressure arch 6. Wash program selection and cycle initiation station 7. Traffic-light fixture

5 Equipment room 15-20 m 2 furnished with drainage system

SNOW REMOVAL IN WINTER, PRECOOLING IN SUMMER

CHASSIS WASH PERFORMED SIMULTANEOUSLY WITH PRETREATMENT

Wash width Wash height

2600 mm 4200 mm

Washbay height

All arches are divided vertically into two sections (upper and lower) to serve cleaning of large and small vehicles.

ENTRANCE

* Motor control panel, connection: 3NPE, 400 V, 50 Hz, 56 kW, 3 x 125 A * Pump station I: 2 x 18,5 kW, 75 bar, 2 x 115 l/min, pipelines to HP-arch (2 x NS 25) and chassis washer (2 x NS 25), connections R3/4� reduction connectors with female thread * Pump station II: 18,5 kW, 20 bar, 300 l/min, pipelines to pre-treatment arch, 2 x NS32 * Interim tank to pump station I, volume 2000 litres, connection to tank DN 50, hose I.D. 57-60 mm * Interim tank to pump station II, volume 2000 litres, connection to tank DN 50, hose I.D. 57-60 mm * Compressed air operated detergent pump: piping NS10 to prewash arch * Compressed air connection: 8/6 mm hose, 8 bar, 360 l/min.

+ 500 mm

Other wash widths and heights available upon request

DETERGENT APPLICATION WITH PIVOTING NOZZLES

Capacity and consumption figures: Vehicle length 12 m: 30 vehicles/h, water 640 l, electricity 1,4 kWh, detergent 2,9 l

OSCILLATING AND PIVOTING HIGHPRESSURE APPLICATION

EXIT

vehicle length 25 m: 20 vehicles/h, water 1240 l, electricity 2,6 kWh, detergent 5,6 l


Cleaning Power with Oscillating Solid-stream Nozzles for Hard-to-brush Vehicles

The outstanding efficiency of the high-pressure cleaning is result of oscillating far-reaching = 1. Sweep up solid-stream nozzles with a double coverage sweeping technique. = 2. Sweep down The high-pressure water jets overlap each other whereby every square centimeter is = 3. Sweep up cleaned at least twice. jets clean the sides from sills and wheels to the roof as well as the front and back. In front and the rear the jets are pivoted from vehicle corners to center line. The high-pressure as well as the prewash arches are divided vertically into two sections (upper and lower) to serve cleaning of large and small vehicles.

Tammermatic is an entrepreneur run company with worldwide know-how and experience. The company has been developing, marketing and producing vehicle wash machines over 40 years. The product range includes vehicle wash systems for cars, vans, buses, trucks, coaches, streetcars, HAV's, tankers and railway rolling stock. Tammermatic has delivered vehicle wash systems to seventy countries and has presence in every continent. Challenges from worldwide installations combined with experience from harsh and unique washing conditions of Nordic countries have been major factors in development of our present state-of-the-art product range.

P.O.Box 206, FIN-33101, Tampere, Finland Tel. +358 (0)3-3800 400, Fax +358 (0)3-3800 401 sales@tammermatic.fi www.tammermatic.com


Tammermatic XJ 800