Page 1

TOOLS FOR THE PROFESSIONAL & ENTHUSIAST


NEILSEN

Distributed by Cannon Tools Limited


Summary of Catalogue Contents • Precision Screwdrivers • Electrical Screwdrivers • Pound Thru’ Screwdrivers • Power Bits and Bit Holders • Impact Drivers • Hex, Spline, Star Keys and Bits •Plus Socket Bits and accessories in 1/4”, 3/8, 1/2 “ and 3/4” Drive

• 1/4" Dr Sockets & Accessories • 3/8" Dr Sockets & Accessories • 1/2" Dr Sockets & Accessories • 3/4" Dr Sockets & Accessories • 1" Dr Sockets & Accessories • Special Application Sockets

Section 1 SCREWDRIVERS PLUS

Section 2 SOCKETS & ACCESSORIES

• Adjustable • Combination • Ratchet • Ring • Socket Wrenches • Special Applications

Section 3 SPANNERS

• Combination / Long Nose • Wire Cutters and Crimpers • Electrical • Waterpump • Riveting • Grip Wrenches or Locking Pliers • Special Application Pliers

Section 4 PLIERS

• Battery / Ignition Tools • Automotive Circuit Testing • Exhaust and Emission Tools • Chisels, Files and Punches• Radiator and Fluids • Timing Tools • Brakes and Transmission Tools • Re-Threading, Taps and Dies • Special Application Tools & Equipment • Jacks and Winches • Tin Snips and Bolt Croppers • Air Impact Wrenches • Air Ratchets • Air Tools and Fittings • Circuit Testing • Soldering • Fuses and Connectors • Inspection Lamps and Torches • Cordless Tools • Power Tools • Power Tool Accessories • Generators / Power Converters • Drills • Brushes and Burrs • Cutting, Grinding and Sanding Discs

• Hammers, Chisels and Wrecking Bars • Knives and Scrapers • Measuring and Weighing • Clamps & Vices • Planes • Saws • Spirit Levels and Tape Measures • Scrapers and Trowels • Plumbing - Pipe Bending and Tile Cutting • Compactors and Rammers • Workwear - Gloves, Knee Pads, Safety Gear, Aprons and Tool Belts • Water Hose and Pressure Washers • Picks / Shovels / Spades / Forks • Trowels / Rakes and Hoes • Hedge Cutters and Pruning • Picks and Axes • Sprayers

Section 5 AUTOMOTIVE

Section 6 ELECTRICAL

Section 7 CONSTRUCTION

Section 8 GARDENING

• Assortment Boxes • Tool Bags & Boxes • Padlocks and Bolts • Ladders • Rope, Straps and Snap Hooks • Tarpaulins and Dust Sheets • Sack Trucks

Section 9 HARDWARE

• Leisure • Hobby Craft • Outdoor Events • Household & Travel Gadgets • Animal, Horse & Stable

Section 10 HOME & LEISURE

Please See Back of Catalogue for Full Index www.cannontools.co.uk


Introduction and Information

NEILSEN brand products are distributed by Cannon Tools Limited, which has been supplying superior quality tools for the hardware, automotive and D.I.Y. markets since 1985.

Cannon Tools aim to supply quality, dependable products for a reasonable price, and provide the broadest selection of tools and equipment from a single source. NEILSEN is a growing brand you know and trust. Whether you are a speciality store or mass market retailer, our products and delivery systems will keep good business coming your way.

Cannon Tools is focused on efficient distribution and support for our partners. Our customers are able to order in complete confidence For those who like to come and see us we cater for all customers requirements. Our cash & carry and distribution centres are located in Blackheath, West Midlands, just one mile from junction 2 of the M5 motorway.

Opening Times : Monday - Friday 8am to 6pm | Saturday - Closed | Sunday 9am to 2pm

OPEN From 8am!

Distribution Center Modern 45,000 Sq ft warehouse,showcasing our entire range under one roof. Additional 90,000 sq ft warehouse under construction will give greater efficiency and flexibility, this is due to complete in April 2017. Customer Service All orders received by 12.00 ( mid day ) will be despatched for delivery next day ( UK mainland only, conditions apply ).

NEILSEN

Distributed by Cannon Tools Limited


Introduction and Information Cannon Tools Limited http://shop.cannontools.co.uk All products from Cannon Tools are available to buy online. Please Note : Our Online Shop is Trade Only, and not available for retail purchases.

http://shop.cannontools.co.uk

Cannon Europe BVBA www.madmunk.com Cannon Europe stocks bikes, bike spares, tools and equipment. It specialises in MAD MUNK, KEPSPEED and NEILSEN brand products. It is a separate company and is run from our distribution centre in Belgium. www.madmunk.com

Kipor UK Limited www.kiporuk.co.uk Take a look at our sister company KIPOR UK which mainly provides petrol and diesel Generators, but also other heavy equipment.

www.kiporuk.co.uk

Limited Stock Availability

Through this catalogue you will find this graphic symbol  which indicates that current stock levels may not last as long as this publication end date. We may also discontinue these items in the future if demand for the product is low.

Website www.cannontools.co.uk We are always trying to improve our products which means some items in this catalogue may have changed colour, specification or completely altered, so please look at the website to see the latest products which didn’t make it to print. Be sure to refresh your internet browser occasionally to see the current web pages.

www.cannontools.co.uk


Section 1

Precision Screwdrivers

CT1003

CT2222

CT2223

2pc Telecom Screwdriver Set

6pc Precision Screwdriver Set

6pc Precision Screwdriver Set

Flat 3mm and Ph0

Flat - 2.0, 2.5, 3.0mm Phillips - Ph0, Ph00, Ph000

Flat : 2.0, 3.0mm Phillips : Ph00, Ph000 . Star - T6, T8

CT0370 CT0371

CT2443

16pc Precision Screwdriver Set

6pc Precision Screwdriver Set

11pc Precision Screwdriver Set

Flat : 1.4, 2.0, 2.4, 3.0mm . Philips : 1.0

Flat : 1.0, 1.2, 1.4, 1.8, 2.4, 3.0mm Philips : 00, 0, 1 . Awl and magnet

Flat : 1.0, 1.4, 2.0, 2.4, 3.0, 3.5mm Hex : 1.5, 2. 0, 2.5mm Phillips : Ph00, Ph0, Ph1, Ph2 . Nut Drivers - 3, 4, 5mm

CT1719

CT1693

CT2442

8 in 1 Precision Screwdriver Set Star Bits : T4. T5. T6. T7. T8. T9. T10. T15

11pc Precision Screwdriver Set Flat : 1.0, 1.2, 1.4, 1.8, 2.4, 3.0mm Phillips : Ph00, Ph0, Ph1 . Awl and Tweezers

CT1241

CT2264

15pc Precision Screwdriver Set Flat : 1.5, 2, 2.5, 3mm Phillips : Ph000, Ph00, Ph0, Ph1 Star : T6, T7, T8, T9, T10, T15, T20

CT1242

31pc Precision Screwdriver Set with Interchangeable Micro Tips

NEILSEN

Distributed by Cannon Tools Limited

8pc Precision Screwdriver Set with Interchangeable Micro Tips Dual End 120mm Long Bits

8 in 1 Screwdriver and LED Torch Phillips - 00. 0. 1. 2 Flat - 4. 5. 6mm Requires 3 AAA Batteries


VDE / Precision / Multi-Head Screwdrivers & Ratchet Drivers CT1773

7pc VDE Precision Screwdriver Set Flat : 2.0, 2.4, 3.0, 4.0mm. Pozidriv : Pz00, Pz0, Pz1 Easy Spin Handles. Tested to 1000V

CT1547

Section 1

CT1552

12pc Precision Screwdriver Set Phillips, Star & Slotted Drivers with Picks & Hooks

6pc Mini Stubby Screwdrivers - 32mm 2 x Slotted / 2 x Phillips / 2 x Star Ideal for Confined Spaces

CT2940

CT0602

Multi-Head Screwdriver This amazing screwdriver fits both Phillips and Pozidriv type screws and 6 different head sizes Ph1, Ph2, Ph3 . Pz1, Pz2, Pz3

2 in 1 Stubby Screwdriver with Flat 6mm and Phillips No2

CT1352

4 in 1 Pocket Screwdriver with Reversible Flat and Phillips Bits

CT2941

Multi-Head Screwdriver This amazing screwdriver fits both Phillips and Pozidriv type screws and 6 different head sizes - Ph1, Ph2, Ph3 . Pz1, Pz2, Pz3 Also can be used with 1/4�Dr deep sockets

CT1131

6 in 1 Quick Change Screwdriver T-Type Screwdriver with Spare Bits in cap Ph1, 2 and Pz1, 2

CT2553

CT2554

12 in 1 Flexi-Head Ratchet Screwdriver

12 in 1 Ratchet Screwdriver with Bits

Flat : 3, 4, 5, 6m Phillips : PH0, Ph1, Ph2, Ph3 Pozidriv : Pz0, Pz1, Pz2, Pz3 with Magnetic Extension

Flat : 3, 4, 5, 6m Phillips : PH0, Ph1, Ph2, Ph3 Pozidriv : Pz0, Pz1, Pz2, Pz3 with Magnetic Extension

www.cannontools.co.uk


Section 1

Screwdrivers & Pound Thru’ Screwdrivers

CT0936

CT0942

CT1428

Flat 3 x 75 mm

Ph0 x 75 mm

Pz0 x 75mm

High grade S2 steel

High grade S2 steel

High grade S2 steel

CT0937

CT0943

CT1429

Flat 5 x 75 mm

Ph1 x 75 mm

Pz1 x 75mm

High grade S2 steel

High grade S2 steel

High grade S2 steel

CT0944

CT1431

Flat 6 x 100 mm

Ph2 x 100 mm

Pz2 x 100mm

High grade S2 steel

High grade S2 steel

High grade S2 steel

CT0945

CT1430

CT0938

CT0939

Flat 6 x 38 mm

Ph2 x 38 mm

Pz2 x 38mm

High grade S2 steel

High grade S2 steel

High grade S2 steel

CT0940

CT0946

CT1432

Flat 8 x 150 mm

Ph3 x 150 mm

Pz3 x 150mm

High grade S2 steel

High grade S2 steel

High grade S2 steel

CT0941

CT0947

CT1433

Flat 9.5 x 200 mm

Ph4 x 200 mm

Pz4 x 200mm

High grade S2 steel

High grade S2 steel

High grade S2 steel

CT1896

CT1895

Flat 6.5 x 400mm

NEILSEN

Ph2 x 400mm

Distributed by Cannon Tools Limited

CT1894

Pz2 x 400mm


Screwdrivers & Pound Thru’ Screwdrivers CT0314

CT4032

CT4033

2pc Pound Thru’ Screwdriver Set

2pc Screwdriver Set Philips No2 and Slotted 6mm 6 “ / 150mm long blades with 13mm Hexagonal Drive

5pc Pound Thru’ Screwdriver Set

Hexagonal bolsters for use with a wrench. Phillips : Ph2 x 100mm . Slotted : 6 x 100mm Soft handle for sure grip. Magnetized tips

CT4031

Section 1

Phillips : Ph2, Ph3 x 450mm Pozidriv : Pz2, Pz3 x 450mm Slotted : 8mm x 450mm Hexagonal bolsters for use with a wrench. Soft handle for sure grip. Magnetized tips

CT0315

CT0710

12pc Pound Thru’ Screwdriver Set 9pc Pound Thru’ Screwdriver Set Hexagonal bolsters for use with a wrench. Pozidriv: Pz 1, 2, 3 & Slotted: 5 , 6, 8mm Soft handle for sure grip and Magnetized tips.

Flat : 3.2, 5, 6, 8, 9.5mm Phillips : Ph0, Ph1, Ph2, Ph3, Ph4 Can be used in conjunction with a Spanner or Socket for extra torque. Magnetic Tips.

CT1427

CT1505 12pc Pound Thru’ Screwdriver Set 12pc Pound Thru’ Screwdriver Set 12pc Pound Thru’ Screwdriver Set Flat : 3.2, 5, 6, 8, 9.5mm Pozidriv : Pz2, Pz0, Pz1, Pz2, Pz3, Pz4 Can be used in conjunction with a Spanner or Socket for extra torque. Magnetic Tips.

Flat : 3.2, 5, 6, 8, 9.5mm Pozidriv : Pz2, Pz0, Pz1, Pz2, Pz3, Pz4 Magnetic Tips. Tactile Rubber Grips. Can be used in conjunction with a Spanner or Socket for extra torque.

Flat : 3.2, 5, 6, 8, 9.5mm Phillips : Ph0, Ph1, Ph2, Ph3, Ph4 Magnetic Tips. Tactile Rubber Grips. Can be used in conjunction with a Spanner or Socket for extra torque.

CT1506

CT0601

CT1502

12pc Pound Thru’ Screwdriver Set 2pc Extra Long Screwdriver Set Heavy Duty Flat 8mm and Phillips No2

4pc PoundThru’ Screwdriver Set Flat : 5.5 x 100mm, 10 x 150mm Phillips : Ph2 x100mm, Ph3 x 150mm

Flat : 3.2, 5, 6, 8, 9.5mm Pozidriv : Pz2, Pz0, Pz1, Pz2, Pz3, Pz4 Can be used in conjunction with a Spanner or Socket for extra torque. Magnetic Tips.

www.cannontools.co.uk


Section 1

Mixed Screwdriver Sets

CT0107

CT4034

CT3318

Wall Mount Rack

Screwdriver Magnetizer & De-magnetizer

CT0620

42pc Screwdriver & Bit Set

8pc Screwdriver Set 39pc Screwdriver & Bit Set With Standard Screwdrivers and Precision Screwdrivers. Bit driver with magnetic holder and 16 Bits - 25mm. 5 Nut Drivers - 36mm. Magnetiser / De-magnetizer

with Magnetizer / demagnetiser. Pillips : Ph0, Ph2 . Slotted : 3, 5, 6mm Chrome Vanadium steel shafts with Cushioned handles

CT2552

CT0339

Driver Handle & Bits Flat : 3, 7mm. Hex : 2, 6mm. Phillips : 0, 1, 2, 3. Pozidriv : 0, 1, 2, 3. Star : T10 - T40 Screwdrivers Flat : 6, 8mm. Phillips : 2, 3 Stubby Screwdrivers : Flat 6mm and Ph2 2 Insulated Screwdrivers : 4mm and Ph0

75pc Screwdriver & Bit Set Screwdrivers : Phillips, Slotted. Precision Screwdrivers : Phillips, Slotted, Star. Bit Driver and Screwdriver Bits : Hex, Phillips, Pozidriv, Slotted, Square, Star. With Magnetic Pick-up Tool and Spirit Level

30pc Screwdriver & Bit Set Screwdrivers : Phillips, Slotted. Double offset Screwdrivers : Phillips, Slotted, Square. Screwdriver Bit Handle and Screwdriver Bits : Hex, Phillips, Pozidriv, Slotted, Star.

CT0150

CT2551

22pc Screwdriver Set PH . 0. 1. 2. 3 Star . T10. T15. T20. T25. T30 Scratch Awl . 6 x 100mm Flat . 3. 4. 5. 6. 8mm 4mm Flat with Spring Screw Holder

CT0617 106pc Screwdriver & Bit Set Precision Screwdrivers - Ph, Slotted, Star Screwdrivers - Ph, Slotted, Star, Square Offset Screwdrivers - Ph, Slotted Screwdriver Bit Handle and Screwdriver Bits : Hex, Phillips, Pozidriv, Slotted, Square, Star. Nut drivers - Metric / SAE With Zip Pouch

NEILSEN

Distributed by Cannon Tools Limited

7pc Folding Screwdriver Set Ph0, Ph00, Ph000 Slotted : 2mm Star : T5, T6, T7


VDE & Mixed Screwdriver Sets CT1018

CT1807

Section 1

CT0241

Pozidriv Screwdriver - Pz2 PPz2 x 38mm supplied in a bags of 10

4pc Screwdriver Set Traditional Cabinet Pattern Handles. Hardened Tips and Shafts. Flat : 5 x 75mm and 6 x 100mm Ph1 x 75mm and Ph2 x 100mm

CT3246

8pc Screwdriver Set Flat : 3.2, 5, 6, 8mm x 38-150mm Long. Phillips : No.1, No.2 x 38-100mm with Magnetic Tips.

CT3004

CT0603

6pc Screwdriver Set

6pc Screwdriver Set with Wall Mountable Rack. Flat and Phillips Tips

Flat : 3 x 75mm / 5 x 75mm / 6 x 100mm Phillips : Ph0 x 65mm / Ph1 x 75mm / Ph2 x 100mm

CT0835 6pc Screwdriver Set

CT1774

Flat : 3 x 7mm. 4 x 100mm. 5.5 x 150mm Phillips : Ph0 x 75mm. Ph1 x 100mm. Ph2 x125mm

Offset Screwdrivers 3 Double Ended Offset Screwdrivers Phillips - No 1 / 2 / 3. Slotted - 5 / 6 / 8mm Ideal for awkward places

CT3794

CT0399

7pc VDE Screwdriver Set Tested to 1000V Flat - 3.5, 4.0, 5.5, 6.5mm. Pozidriv - Pz0, Pz1, Pz2

CT4035

Square Key 8 and 10mm Square Key for Oil Sump Plugs and Gearboxes .

CT1494 13pc VDE Screwdriver Set - 1000V

6pc Folding Screwdriver Set Flat : 3, 5, 6mm. Phillips : Ph0, Ph1, Ph2

Locking Handle with Interchangeable Blades Flat - 3.0, 4.0, 5.5, 6.5mm x 100mm Phillips - Ph1 x 80mm. Ph2 x 100mm Pozidriv - Pz1 x 80mm. Pz2 x 100mm Star - T10, T15, T20 x 100mm Voltage Tester

9pc VDE & Standard Screwdriver Set Phillips : Ph1, Ph2 . VDE Phillips : Ph1, Ph2 Slotted : 5, 6mm . VDE Slotted : 3.5, 5.5, 6.5mm

www.cannontools.co.uk


Section 1

Screwdriver Bits & Drivers

CT1135

CT0985

CT1517

3pc Flexible Driver & Bit Set 26pc Bit Set with Ratchet Driver 58pc Ratchet Driver & Bit Set with Flexible Extension Flat 3, 4, 5.5, 6, 6, 7mm Ph0 x 2, Ph1 x 4, Ph2 x 4, Ph3 x 4 Hex : 2.0, 2.5, 3.0, 4.0, 5.0, 5.5, 6.0mm Pz0 x 1. Pz1 x 2, Pz2 x 2, Pz3 x 2 Star : T10, T15, T20, T25, T27, T30, T40 Nut driver : 5, 6, 7, 8, 9, 10, 11mm Nut driver : 3/16, 1/4, 5/16, 11/32, 3/8, 7/16, 1/2”

Flat : 3, 4, 5, 6, 7mm Ph0. Ph1, Ph2, Ph3, Pz1, Pz2, Pz3 Hex : 5, 6, 7, 8, 9, 10mm Star : T10, T15, T20, T25, T27, T30 Nut Drivers 5, 6, 7, 8, 9, 10mm

600mm Long Flexible Shafts 7mm Socket Driver, 1/4”Dr Socket Driver Screwdriver Bit Holder with Flat, Phillips and Star Bits.

CT1605

CT1037

3pc Ratchet Spinner Set 1/4”Dr Socket Adapters

CT1867

Hex 6mm, Flat 6mm, Philips Ph2 - 25mm bits.

CT1551

8pc Impact Driver Set With 1/2”Dr Bit Adaptor, Flat and Phillips Bits

CT1887 10pc Impact Driver Set 8 x 5/16” Bits with 1/2”Drive Adaptor

11pc Bit Set with Rratchet Handle Flat : 5. 6mm. Phillips : Ph1, Ph2, Ph3. Pozidriv : Pz1, Pz2. Star : T10, T15, T20.

CT2754

CT1797

13pc Power Bit Set

11pc Power Bit Set With Flexible Extension Bar 50mm Bits : Flat 4.5. 7mm Ph1, Ph2 and Pz1, Pz2 75mm Bits : Ph1, Ph2 and Pz1, Pz2

NEILSEN

Distributed by Cannon Tools Limited

Wrist Band or Drill Saddle Bit Home 50mm Magnetic Quick Chuck S2 Steel 25mm Bits : Flat - 6mm Ph : 1, 2, 3 . Pz : 1, 2, 3 Star : T10, T15, T20, T25, T30

8pc Bit Organiser with Magnetic Bit Holder Flat :5, 6, 7mm • Phillips : 0, 1, 2, 3


Security Bit Sets / Screwdriver Bit Sets

Section 1

CT1548

CT1208

CT1209

100pc Security Bit Set with Driver

74pc Security Bit & Socket Set

75pc Security Bit Set

Tamper Proof Bits : Clutch, Flat, Hex, Philips, Pozidriv Spanner, Star, Spline, Square, Torq, Tri wing Bits, Hex metric and imperial and Tamper Proof

Dual Drive Ratchet - 1/4”Dr • 1/4”Dr Bit Adaptors Clutch : 1, 2, 3 • Flat : 3, 5.5, 7mm Hex : 2, 2.5, 3, 4, 5, 6mm • 5/16, 3/32, 7/16, 1/8, 9/64, 5/32” Phillips : P0, 1, 2, 3 • Pozidriv : 0, 1, 2, 3 Spanner : 4, 6, 8, 10 • Spline : 5, 6, 8 / S2 Square : 00, 1, 2, 3 • Torq : DS - 1, 2, 3, 4 Tri-Wing : 6, 8, 10 • Star : T6 - T40 Sockets : 4 - 14mm

Magnetic Driver Handle • 1/4”Dr Adaptors 60mm Stainless Steel Bit Holder Clutch : 1, 2, 3 • Flat : 3, 5.5, 7mm Hex : 2, 2.5, 3, 4, 5, 6mm • 5/16, 3/32, 7/16, 1/8, 9/64, 5/32” Phillips : 0, 1, 2, 3 • Pozidriv : 0, 1, 2, 3 Spanner : 4, 6, 8, 10 • Spline : 5, 6, 8 Square : 00, 1, 2, 3 • Torq : 1, 2, 3, 4 Tri-Wing : 6, 8, 10 • Star : T6 - T40 Wing Nut Driver

CT1911

CT0401

CT1036

33pc Security Bit Set 100pc Security Bit Set Tamper Proof Bits : Clutch, Flat, Hex, Philips, Pozidriv Spanner, Star, Spline, Square, Torq, Tri wing Bits, Hex metric and imperial and Tamper Proof

CT1115

33pc Security Bit Set with Offset Driver Torq : 6, 8, 10mm • Spanner Bits : 4, 6, 8, 10mm Tri-Wing Bits : 1, 2, 3, 4 • Hex Bits : 2, 2.5, 3, 4, 5, 6mm Hex Bits : 5/64, 3/32, 7/64, 1/8, 9/64, 5/32” Star Bits : T8, T10, T15, T20, T25, T27, T30, T35, T40

Tamper proof bits Star : T8, T10, T15, T20, T25, T27, T30, T35, T40 Hex : 2, 2.5, 3, 4, 5, 6mm Tri-wing : 1, 2, 3, 4 Spanner : 4, 6, 8,10mm Torque Bit : 6, 8, 10mm Pozidriv : Pz1, Pz2, Pz3 Philips : Ph1, Ph2 Slotted : 6mm

50pc Security Bit Set

Clutch

Flat

Hex

Hex TP

CT0715 32pc Security Bit Set 150mm Long

CT2875

Clutch : 1, 2, 3. Flat : 4, 5, 6mm Hex : 2, 2.5, 3, 4, 5, 6mm Phillips : Ph1, Ph2. Pozidriv : Pz1, Pz2 Spanner : 4, 6, 8, 10mm. Spline : M5, M6, M8 Star : T8, T10, T15, T20, T25, T27, T30, T35, T40 Square : 1, 2. Torq : 6, 8, 10. Tri-Wing : 1, 2, 3, 4

with Magnetic Bit Holder Torq Bits : 6, 8, 10mm • Spanner Bits : 4, 6, 8, 10mm Tri-Wing Bits : 1, 2, 3, 4 • Hex Bits : 2, 2.5, 3, 4, 5, 6mm Hex Bits : 5/64, 3/32, 7/64, 1/8, 9/64, 5/32” Star Bits : T8, T10, T15, T20, T25, T27, T30, T35, T40

32pc Security Bit Set - 75mm Long Hex Bits - 2 . 2.5 . 3 . 4 . 5 . 6mm Phillips Bits - 2 . 3 • Pozidriv Bits - 1 . 2 . 3 Slotted - 6mm • Spanner Bits - 4 . 6 . 8 . 10 Star Bits - T8 . T10 . T15 . T20 . T25 . T27 . T30 . T35 . T40 Torq Bits - 6 . 8 . 10 • Tri-Wing Bits - 1 . 2 . 3 . 4

Philips

Pozidriv

Spanner

Spline

Square

Star

Star TP

Torq

Tri-Wing

www.cannontools.co.uk


Section 1

Screwdriver Bits & Sets

CT1554

CT1599

CT0838

15pc Bit Box 10pc Power Bit Set

15 Pz2 Bits in flip top containers.

10 x Pz2 Power Bits 25mm long

CT3790

15pc Bit Boxes

Supplied in a 12pc Counter Display Unit.

24 x 15pc Flip Top Bit Boxes with Hex, Star, Phillips, Pozidriv, Slotted Bits Supplied in a 360pc Counter Display Unit

CT3555

CT1553 50pc Bit Set - Pz2 25mm long 10pc 25mm Drywall Bit Set

CT0404

No.2 Phillips Bits for Drywalls with collar to prevent damage to plasterboard.

Multi-Head Screwdriver Bits

33pc Power Bit Set with Ph2 and Pz2 Bits only

Amazing screwdriver bits that fit both Phillips and Pozidriv type screws.

65mm long Double Ended Flat: 3, 4, 6, 7mm Philips : Ph1, Ph2, Ph3. Pozidriv : Pz1, Pz2, Pz3

CT1189

CT2942

CT0935

33pc Power Bit Set

33pc Multi-Head Screwdriver Bit Set - 25mm

with Ph2 and Pz2 Bits only

Ph1, Ph2, Ph3 • Pz1, Pz2, Pz3 • Magnetic Bit Holder

CT4036

CT2943

19pc Power Bit Set Ph1, 2, 3 • Pz1, 2, 3 Slotted : 4 & 6mm • Star : T10, T15, T20, T25 25 & 50mm long with 60mm Magnetic Extension Bar

10pc Multi-Head Screwdriver Bit Set 50mm Magnetic Bit Holder Ph1, Ph2, Ph3 • Pz1, Pz2, Pz3

CT2944

CT4037

9pc Power Bit Set 65mm long Double Ended Bits with belt fitting Rubber Bit Home Phillips 1, 2, 3 • Pozidriv 1, 2, 3 • Flat 4, 6, 7mm

CT1550

10pc 50mm Power Bit Set Magnetic Holder. Flat : 4, 6, 8mm Phillips : Ph1, Ph2, Ph3. Pozidriv : Pz1, Pz2, Pz3

CT1017

9pc Extra Long Power Bit Set

5pc Power Bit Set 75mm Long Ph1, Ph2, Pz2 • Slotted : 5, 6mm Chrome Vanadium

NEILSEN

10pc Power Bit Set

Distributed by Cannon Tools Limited

9pc Multi-Head Screwdriver Bit Set 100mm Long - Ph1, Ph2, Ph3 • Pz1, Pz2, Pz3

150mm Long Flat : 3, 5, 7mm Philips : 1, 2, 3 Pozidriv : 1, 2, 3


Screwdriver Bit Sets / Drivers & Adaptors CT1555

17pc Power Bit Set Hex, Phillips & Slotted Bits Magnetic Bit Holder. Ideal for cordless screwdrivers.

CT2755

CT3093

CT3092

Quick Release Bit Holder

2pc Screwdriver Bit Holder Set

for 1/4” Hex Bits

60 and 150mm Long Magnetic

Section 1

CT3094 Quick Release Bit Holder

CT3501

for 1/4” Hex Bits wih Solid Brass body and Rubber grip.

3pc Screwdriver Bit Holder Set 50, 100 and 150mm Long Magnetic

CT3095 175mm Bit Holder with Flexi-shaft for 1/4” Hex Bits

28pc Double Sided Bit Set With Magnetic Bit Holder and Hex, Phillips, Pozidriv, Slotted & Star Bits

CT3244 CT1940

CT1549 Offset Screwdriver Bit Holder Offset 90 degree Power Bit attachment

CT1941

15pc Bit Set Hex : 3, 4, 5, 6 mm Phillips : Ph1, Ph2 Pozidriv : Pz1, Pz2 Slotted : 5.5, 7mm Star : T10, 15, 20, 25, 30

29pc Power Bit Set 25mm assorted Power Bits Flat,Hex,Pozidriv,Phillips and Star.

CT3241

CT3699 Offset Screwdriver Bit Holder

11pc Drill & Drive System With chuck adaptor Bits : Flat 4, 5, 6mm Hex : 3, 4, 5mm Philllips : 1, 2, 3

90 degree Flexi-Shaft Power Bit attachment

CT2924

5pc Bit Holder Set 1/4, 3/8 & 1/2"Dr for 6, 8 and 10mm Hex

CT1758 CT2360

7pc 5/16” Pozidriv Bits 1/2”Dr Adaptor with 3 x Pz2 and 3 x Pz3 Bits

6 in 1 Drill & Drive Set Quick Change Chuck 2.5, 2.8, 3mm Drills Ph1, 2, 3 Bits

90mm Screw Finder Bit holder 1/4” Hex Shank with quick change bit facility. Self retracting guide sleeve accepts up to size 10 screws. For use with any variable speed drill and cordless screwdrivers. Accepts any standard hex shank power bits.

www.cannontools.co.uk


Section 1

Hex Keys & Driver Sets

CT2224

CT0656

6pc Hex Driver Set Sizes : 1.5, 2.0, 2.5, 3.0, 3.5, 4.0mm

CT0986

CT3288

10pc Offset Hex Key Set

8pc Folding Hex Key Set

Sizes : 1.5 - 10mm

Sizes : 2.5, 3, 4, 5, 6, 7, 8, 10mm

CT0615

CT1492

3 way Hex Key Sizes : 4, 5, 6mm

9pc Offset Hex Key Set

CT3283

Extra Long with Ball End Sizes : 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm

Hex Key - 7mm

6pc Folding Hex Key Set Sizes : 2, 2.5, 3, 4, 5, 6mm

CT1493 CT1861

CT3282 6pc Folding Ball Point Hex Key Set

Hex Key - 8mm

Sizes : 2, 2.5, 3, 4, 5, 6mm

CT1495 CT0368 6pc Folding Screwdriver Set

9pc Offset Hex Key Set 10pc Hex Key Set Sizes: 1.5 - 10mm

Extra Long with Ball End with Magnetic Tips. Sizes : 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm

CT0369

CT1001

Keep up-to-date with the latest products on the website

10pc SAE Hex Key Set Sizes: 1/16” - 3/8” CT1226

10pc Hex Key Set Sizes : 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 8, 10mm

NEILSEN

Distributed by Cannon Tools Limited

Hex : 3, 5, 6mm Phillips : Ph1, Ph2 Slottedt : 6mm

9pc Hex Key Set Extra Long with Ball End Sizes : 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm Plastic Handle for easy grip and increased torque.


Hex Keys & Driver Sets CT1040

CT1039

CT1560

Metric & SAE 30pc Hex Key Set

12pc Hex Key Set Extra Large Sizes Metric : 8, 10, 12, 14, 17, 19mm SAE : 3/8, 7/16, 1/2, 9/16, 5/8, 3/4”

6pc Hex Key Set

Section 1

0.7, 0.9, 1.3, 1.5, 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 7, 8, 10mm 0.028, 0.035, 0.050 • 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 “

CT3453

Sizes - 8, 10, 12, 14, 17, 19mm

CT1383 CT3938

5pc Swivel Head Hex Key Set

6pc VDE Hex Key Set

6pc Multi-Jointed Hex Wrench Set

230 - 250mm Long Sizes : 2 x 2.5, 3 x 4, 5 x 6, 8 x 10, 12 x 14mm

1000 Volt Insulated VDE Set Sizes - 2.5, 3, 4, 5, 6, 8mm Extra Long A Must for Working on Hi-Brid Vehicles

Sizes ; 3, 4, 5, 6, 8, 10mm

CT1222 CT3800

CT0610

2pc Hex Key Set

6pc T-Handle Ball End Hex Key Set

8pc High Torque Ball End Hex Key Set

4 and 5mm Hex Keys with Ball End 225mm S2 Steel Long shaft Ideal for Central Heating Pumps

Sizes - 2, 2.5, 3, 5, 6, 8mm

Sizes - 2 x 100mm, 2.5 x 100mm, 3 x 100mm, 4 x 150mm, 5 x 150mm, 6 x 200mm, 8 x 200mm, 10 x 200mm

CT1191

CT1192

CT0275

Hex Key Motorcycle Spindle Tool Sizes : 19, 22 and 24mm

CT2763

10pc T-Handle Hex Key Wrench Set Sizes : 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 8, 10mm with wall mountable stand

10pc T-Handle Hex Key Wrench Set SAE Sizes : 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8” with wall mountable stand

3/8”Dr Hex Key Motorcycle Spindle Tool Sizes : 17, 19, 22, 24mm Use with any 3/8”Dr tool or with a standard socket

www.cannontools.co.uk


Section 1

Hex Bit Sets with Sockets

CT1227

CT4025

CT4039

2pc Hex Bit Set

7pc Hex Bit Set

7 x 36mm & 9 x 92mm Long For Automotive Brake Linings

Sizes : 4, 5, 6, 7, 8, 10mm with 3/8”Dr Adaptor

CT2120

CT0734

11pc Hex Bit Set 7mm Hex Bit 1/2"Dr 125mm Long

9pc Hex Bit Set 3/8”Dr with 2 Screwdriver Bits Hex : 3, 4, 5, 5.5, 6, 8, 10mm • Flat : 6mm and Ph2

30mm & 75mm Long. Sizes : 4, 5, 6, 7, 8, 10, 12mm 35mm 3/8 and 1/2in. Drive Adaptors. Chrome Vanadium

CT0123

CT2775

7pc Hex Bit Set 3/8”Dr Sizes : 3, 4, 5, 6, 7, 8, 10mm 110mm Long Suitable for Automotive use 10pc Hex Bit Set

1/2”Dr SAE : 1/2, 9/16, 5/8” 3/8”Dr : 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8”

CT0394 CT1275

CT3629

30pc Hex Bit Set 1/2”Dr 55, 100, 140, 200mm Long Sizes : 5, 6, 7, 8, 10, 12, 14, 17, 19mm

5pc Hex Bit Set 1/2"Dr Sizes : 7, 8, 10, 12, 14mm Supplied in a foam tray for use in your tool box.

CT1388

CT2563

8pc Hex Bit Set - 1/2”Dr 9pc Hex Bit Set 1/2”Dr Sizes. 4, 5, 6, 8, 10, 12, 14, 17, 19mm

Sizes : 5, 6, 7, 8, 10, 12, 14, 17mm • 140mm Long

6pc Hex Bit Set - 3/4”Dr Sizes : 14, 17, 19, 21, 22, 23mm • Chrome Molybdenum

CT2526

CT3532

CT0914

9pc Hex Bit Set

9pc Hex Bit Set - 1/2”Dr

8pc 1/2”Dr 75mm Long Impact Hex Bit Set

1/2"Dr Sizes : 4, 5, 6, 7, 8, 10, 12, 14, 17mm

Sizes : 6, 7, 8, 10, 12, 14, 17, 19mm

Sizes : 5, 6, 8, 10, 12,14, 17, 19mm

NEILSEN

Distributed by Cannon Tools Limited


Star Keys & Driver Sets CT2376

CT1782

Section 1

CT2838

Magnetic

6pc Star Driver Set Sizes : T10, T15, T20, T25, T27, T30 with Rack

CT0421

11pc Star Driver Set Sizes : T6, T7, T8, T9, T10 x 75mm, T15, T20 x 100mm. T25, T27, T30, T40 x 150mm

CT2899

11pc Star Driver Set Sizes : T6, T7, T8, T9, T10 x 75mm, T15, T20 x 100mm. T25, T27, T30, T40 x 150mm

CT1490

6pc Star Driver Set

4pc Star Driver Set

6pc Folding Star Key Set

Mobile Phone Repair Set Star T5, T6, T7 with Mini Chisel and Soft grip handles.

250mm Long Sizes : T15, T20, T25, T30

Sizes : T10, T15, T20, T25, T27, T30

CT1420

CT1860

CT1421

Magnetic

Extra Long 9pc Offset Star Key Set

9pc Offset Star Key Set

Sizes : T10, T15, T20, T25, T27, T30, T40, T45, T50

Sizes : T10, T15, T20, T25, T27, T30, T40, T45, T50

CT1223

CT1837

6pc T-Handle Star Key Set Sizes : T10, T15, T20, T25, T30, T40 Tamper Proof

9pc High Torque Star Key Set Sizes : T10, T15, T20, T25, T27, T30, T40, T45, T50

CT3452

CT1384

6pc Multi-Jointed Star Wrench Set Sizes : T20, T25, T30, T40, T45, T50.

5pc Star Key Set with Swivel Head Sizes : T15 x T20, T25 x T27, T30 x T40, T45 x T50, T55 x T60 • 230 - 250mm Long Chrome-Vanadium

9pc Offset Star Key Set Sizes : T10, T15, T20, T25, T27, T30, T40, T45, T50 Extra Long with Magnetic Tips

CT2221

16pc T-Handle Hex & Star Driver Set - Ball Point Hex : 2 x 75mm, 2.5 x 75mm, 3 x 100mm, 4 x 100mm, 5 x 150mm, 6 x 150mm, 8 x 200, 10 x 200mm. Star : T10 x 75mm, T15 x 75mm, T20 x 100mm, T25 x 100mm, T30 x 150mm, T40 x 150mm, T45 x 200mm.

CT3939

9pc VDE Star Key Set Extra Long 1000 Volt Insulated VDE Set. Sizes - T10, T15, T20, T25, T27, T30, T40, T45, T50. A Must for Working on Hi-Brid Vehicles.

www.cannontools.co.uk


Section 1

Star Bit Sets with Sockets

CT3706

CT2115

CT1228

7pc Security Star Bit Set Tamper Proof Bits : T9, T10, T15, T20, T25, T27, T30

7pc Star Bit Set - 3/8"Dr Adaptor Sizes : T20, T25, T30, T40, T45, T50. Chrome Vanadium

CT2055 CT0925

5pc Star Bit Set Sizes : T30, T40, T45, T50 with 3/8”Dr Universal Joint Socket

CT3025

9pc Hex & Star Bit Set Hex Bits 3/8”Dr - 1/4”, 3/8” and 7, 8, 10mm Star Bits 3/8”Dr - T40, T45, T50 • 1/2”Dr - T60

11pc Star Bit Set 1/4 & 3/8"Dr Tamper Proof : T10, T15, T20, T25, T27, T30, T40, T45, T50, T55, T60.

3pc Star Bit Set - 3/8"Dr Sizes : T40, T45, T50.

CT3628

CT0733

CT3204

9pc Star Bit Set 3/8"Dr Sizes : T10, T15, T20, T25, T30, T40, T45, T50, T55.

CT0915

5pc Star Bit Set 1/2”Dr Sizes : T45, T50, T55, T60, T70. Supplied in a foam tray for use in your tool box.

3pc T40 Star Bit Set

CT3205

CT2562

3pc T45 Star Bit Set 10pc Star Bit Set - 1/2"Dr Sizes : T20, T25, T27, T30, T40, T45, T50, T55, T60

CT3624

10pc Star Bit Set - 1/2"Dr Sizes : T20, T25, T27, T30, T40, T45, T50, T55, T60

CT3206

CT1435 3pc T50 Star Bit Set

CT3207 13pc Star Bit Set 1/4” . 3/8” . 1/2” Dr 1/4” Drive - T8, T10, T15, T20, T25, T27, T30 3/8” Drive - T40, T45, T47, T50, T55 1/2” Drive - T60

NEILSEN

Distributed by Cannon Tools Limited

15pc Star Bit Set 1/2"Dr Bit Adaptor 30 and 75mm long. T20, T25, T30, T40, T45, T50, T55, T60

3pc T60 Star Bit Set


Long Star Bits with Sockets CT2117

CT2118

Section 1

CT2116

T55 Star Bit

T70 Star Bit

T70 Star Bit

1/2”Dr x 125mm long

1/2”Dr x 100mm long

1/2”Dr x 100mm long Tamper Proof

CT3027

CT2418

4pc Star Bit Set - 3/8"Dr Sizes : T40, T45, T47, T50 x 100mm Deep CT3533

CT1276

6pc Star Bit Set 3/8"Dr Tamper Proof T40 Bits T40 Bits x 48, 98, 148mm long

CT2565 8pc Star Bit Set - 1/2"Dr Sizes : T30, T40, T45, T47, T50, T55, T60, T70 x 140mm.

CT2564

9pc Impact Star Bit Set 1/2”Dr 75mm Long Sizes - T20, T25, T30, T40, T45, T50, T55, T60, T70.

7pc Star Bit Set 1/2”Dr : T45, T50, T55 x 100mm 3/8”Dr : T20, T25, T30, T40 x 95mm

CT0397 CT2561

13pc Star Bit Set 1/2"Dr Bit Adaptor 30 and 75mm long. T30, T40, T45, T50, T55, T60

CT1256

18pc Star Bit Set - 1/4” & 1/2"Dr T8, T10, T15, T20, T25, T27, x 37mm 1/4”Dr T30, T40, T45, T50, T55, T60 x 55 and 100mm 1/2"Dr

32pc Star Bit Set 1/2"Dr x 55, 100, 140, 200mm Long Sizes : T20, T25, T27, T30, T40, T45, T50, T55, T60, T70

16pc Star Bit Set - 1/2"Dr T20,. T25, T27, T30, T40 - Tamper Proof T20, T25, T27, T30, T40, T45, T50, T55, T60, T70, T80

www.cannontools.co.uk


Section 1

Star Bits and Sockets with Mixed Bit Sets

CT3630

CT0464

CT3625

34pc Star Socket & Bit Set - 3/8”Dr

35pc Star Socket & Bit Set

35pc Star Socket & Bit Set

Sockets : E4, E5, E6, E7, E8, E10, E11, E12, E14, E16, E18, E20 Bits : T10, T15, T20, T25, T27, T30, T40, T45, T50, T55, T60 25mm Bits : T10, T15, T20, T25, T27, T30, T40, T45, T50, T55 Tamper Proof. 3/8”Dr Bit Adaptor. Chrome-Vanadium

1/4”Dr, 3/8”Dr . and 1/2”Dr 1/4”Dr : E4, E5, E6, E7, E8 3/8”Dr : E10, E11, E12, E14, E16, E18, E20 Star Bits 25, 30 & 75mm : T10, T15, T20, T25, T30, T40, T45, T50, T55, T60, T70.

1/4” 3/8” and 1/2”Dr Sockets : E4, E5, E6, E7, E8, E10, E12, E14, E16, E18 . Bits : T8, T10, T15, T20, T25, T27, T30, T40, T45, T47, T50, T55, T60. Tamper Proof : T8, T9, T10, T15, T20, T25, T27, T30, T40, T45, T50, T55. Chrome-Vanadium.

CT2841

CT1261

CT3535

17pc Star Bit & E-Socket Set Tamper Proof Star Bits : T10, T15, T20, T25, T30, T40, T45, T50, T55 E-Sockets : E6, E7, E8, E10, E12, E14, E16, 1/4” and 3/8”Dr with 3/8”Dr Bit Adaptor

17pc Star Socket Set Sizes 1/4”Dr : E4, E5, E6, E7. Sizes 3/8”Dr : E8, E10, E11, E12, E14. with 3/8” to 1/4” Drive Adaptor

14pc Star Socket Set 1/4”Dr, 3/8”Dr & 1/2”Dr Sizes : E4, E5, E6, E7, E8 E10, E11, E12, E14, E16, E18, E20, E22, E24

CT2560 CT0693

CT0732

10pc Star Socket Set Sizes : E4, E5, E6, E7, E8, E10, E12, E14, E16, E18

25pc Star Socket & Bit Set Sizes : E4, E5, E6, E7, E8, E10, E11, E12, E14, E16, E18. T7, T8, T9, T10, T15, T20, T25, T27, T30, T40, T45, T50.

CT2779

CT3242

27pc Star Socket & Bit Set Sockets : E10, E12, E14, E16, E18, E20, E22, E24. Bits : T8, T10, T15, T20, T25, T27, T30, T40, T45, T50, T55, T60, T70 with 3/8”Dr Bit Adaptor.

CT2466

17pc Ratchet & Bit Set - 3/8"Dr

12pc Star Bit Set with Driver

Flat Bits : 5.5, 7mm • Hex Bits : 3, 4, 5, 6mm Ph 1, Ph2 • Pz1, Pz2 • Star : T20, T30, T40, T45, T50, T55

1/4” to 3/8”Dr Adaptor Sizes : T10, T15, T20, T25, T27, T30, T40, T45, T50, T55

NEILSEN

Distributed by Cannon Tools Limited

20pc Star Bit & E-Socket Set 3/8”Dr Ratchet / Sockets : E10, E12, E14, E16. Bits : T8, T10, T15, T20, T25, T30, T40 with Ph0, 1, 2, 3.


Ribe, Spline, Star Bits & Wrenches CT0396

Section 1

CT3454

CT3631

5pc Spline Bit Set

5pc Multi-Jointed Spline Wrench Set

1/2"Dr Sizes : M10, M12, M14, M16, M18. Supplied in a foam tray for use in your tool box.

32pc Ribe Bit Set

Sizes : M4, M5, M6, M8, M10

55, 100, 140, 200mm Long. 1/2”Dr Sizes : M5, M6, M7, M8, M9, M10, M12, M13, M14.

CT4038

CT3353

CT0120

11pc Spline Bit Set 15pc Ribe Bit Set 1/2” Drive Adaptor Sizes : M6, M7, M8, M10, M12, M13, M14 10mm Hex shaft x 30mm and 75mm Long Suitable for VAG Cylinder Head Bolts.

30mm & 75mm Long Sizes : M5, M6, M8, M10, M12 with 3/8” and 1/2”Dr Adaptors. Chrome Vanadium

CT0124

6pc Spline Bit Set 1/2”Dr 75 mm long Sizes : M14, M16, M18 x 45 mm

CT3531

CT3530

7pc Spline Bit Set Sizes : M4, M5, M6, M7, M8, M9, M10 110mm Long Suitable for Cylinder Head Removal and Brake Servicing

9pc Ribe Impact Bit Set

CT4070

1/2”Dr • 75mm Long Sizes : M5, M6, M7, M8, M9, M10, M12, M13, M14.

6pc Spline & Star Bit Set 30mm

1/2”Dr Spline Bits : M10 x 65, 110mm & 140mm He & Spline Adaptors : 22mm, 28mm Star Bit : T50 x 65mm

CT0395

CT1389

26pc Spline Bit Set

6pc Star & Spline Bit Set

55, 100, 140, 200mm Long. 1/2”Dr Sizes : M5, M6, M8, M9, M10, M12, M14, M16.

1/2”Dr • 75mm Long Sizes - M4, M5, M6, M8, M9, M10, M12, M14, M16

CT4005

CT2119

2 x M14 Spline Bits

9pc Spline Impact Bit Set

CT4006

M8 x 800mm

M10 Spline Bit

CT4007

M10 x 800mm

1/2”Dr x 140mm for Cylinder Head Bolts

CT4008

M12 x 800mm

CT4009

M14 x 800mm

Extra Long Spline Bits 1/2”Dr x 800mm For use on vehicle drive shafts.

3/4”Dr Spline Bits : M16, M18. Star Bits : T70, T80, T90, T100 Tamper Proof • Chrome Molybdenum

www.cannontools.co.uk


Section 1

Mixed Bit Sets

CT3534

56pc Hex, Star & Spline Bit Set 30mm and 75mm long • Hex : 4, 5, 6, 7, 8, 10, 12, 14. Spline : M5, M6, M8, M10, M12. Star : T10, T15, T20, T25, T27, T30, T40, T45, T50, T55, T60. E-Sockets : 4, 5, 6, 7, 8, 10, 11, 12, 14, 16, 18, E20. 10mm Hex Shank Bits with 3/8” and 1/2”Dr Adaptors

CT1257

CT3750

CT0125

75pc Hex, Ribe, Spline & Star Bit Se t

38pc Hex, Ribe, Star & Spline Bit Set

Hex : 4 to12mm Ribe : M5 to M14 Spline : M5 to M12 Star : T20 to T60 plus Tamper proof 10mm Hex Shank Bits x 30 and 75mm with 3/8 and 1/2”Dr Adaptors

1/4in. and 1/2”Dr Hex Bits : 5 - 24mm Ribe Bits : M7 - M10 Spline Bits : M9 - M16 and M18 Impact Star Bits : T10 - T50 Tamper proof Star Bits : T30 - T70 In Lengths : 37- 295mm Suitable for a wide range of vehicle servicing.

CT1544 CT1859

30pc Mixed Bit Set - 1/2”Dr Flat Bits - 8, 10, 12, 14 x 60mm Hex Bits : 5, 6, 7, 8, 10, 12, 14, 17 x 60mm Hex Bits : 5, 6, 8, 10, 12 & 6. 8. 10. 12 Ball End x 80mm Phillips Bits : Ph2, Ph3, Ph4 x 60mm Spline Bits : M5, M6, M8, M10, M12, M14 x 80mm

CT0357

22pc Hex & Star Bit Set - 1/2"Dr Hex : 5, 6, 7, 8, 10, 12, 14, 17mm Spline : M5, M6, M8, M10, M12 Star : T20, T25, T27, T30, T40, T45, T50, T55, T60 Lengths : 55, 120, 140, 160, 180mm

13pc Hex, Spline & Star Bit Set - 1/2”Dr Alternator tool kit / Disc Brake Calliper Service Set Hex : 8, 10mm • Spline : M8, M10 • Star : T40, T50

CT2286

CT1390

16pc Hex, Star Bit and E-Socket Set - 3/4" & 1"Dr For Cylinder Head Bolts, Wheels and Shock Absorbers. Hex Bits : 17, 19, 22, 24mm x 107mm Long Star Bits : T60, T70, T80, T90, T100 x 107mm Long E-Sockets : E18, E20, E22, E24 x 107mm Long 3/4" & 1"Dr Bit Adaptors. 4mm Hex key.

NEILSEN

Distributed by Cannon Tools Limited

27pc Bit Set 9pc Hex & Spline Bit - 3/4"Dr Hex Bits - 14, 17, 19, 21, 22, 23, 24mm Spline Bits - M16, M18 - Tamper Proof Chrome Molybdenum

Hex - 4, 5, 6, 7, 8, 10, 12mm Phillips - Ph2, Ph3 Ribe - M6, M8, M10, M12 Spline - M5, M6, M8, M10, M12 Star - T20, T25, T30, T40, T45, T50, T55 10mm Hex Drive Ratchet & Extension Bar - 3” / 75mm


Mixed Bit Sets & Unique Bit Sets CT1436

40pc Hex, Star & Spline Bit Set

CT1114

40pc Hex, Star & Spline Bit Set

Hex : 4, 5, 6, 7, 8, 10, 12. Spline : M5, M6, M8, M10, M12. Star : T20, T25, T30, T40, T45, T50, T55. 1/2”Dr 30mm and 75mm long Chrome vanadium.

Hex : 4, 5, 6, 7, 8, 10, 12. Spline : M5, M6, M8, M10, M12. Star : T20, T25, T30, T40, T45, T50, T55. 1/2”Dr 30mm and 75mm long Chrome vanadium.

CT1207

CT1882

Section 1

CT3985

10pc Unique Spline Bit Set for BMW Wheel Locks Mixed 13 to 23 point profiles Use with a 17mm Wheel Nut Socket

CT3987

10pc Unique Ribe Bit Set for BMW Wheel Locks 41pc Hex, Ribe, Star & Spline Bit Set Hex : 6, 7, 8, 10, 12, 13, 14, 17, 19mm Ribe : R5, R6, R7, R8, R9, R10, R13, R14 Spline : M5, M6, M8, M9, M10, M12, M14, M16 Star : T20, T25, T30, T35, T40, T45, T55, T70, T80 3/8” and 1/2” Adaptors, Bits 30mm and 75mm Long

CT3026

54pc Hex, Star & Spline Bit Set 10mm Hex Shank Hex : 4, 5, 6, 7, 8, 10, Spline : M5, M6, M8, M10, M12. Star : T20, T25, T30, T40, T45, T50, T55 3/8” & 1/2”Dr Adaptors, Bits 30mm and 75mm long

Mixed 7 to 16 rib profiles Use with a 17mm Wheel Nut Socket

CT3986

CT3668 10pc Unique Spline Bit Set for VAG Wheel Locks Mixed 10 to 21 point profiles Use with a 17mm Wheel Nut Socket

18pc Hex, Spline & Star Bit Set Hex Bits : 4, 5, 6, 7, 8, 10, 12mm Spline Bits : M5, M6, M8, M10, M12 Star Bits : T20, T30, T40, T45, T50, T55 1/4" & 1/2"Dr Bits 37mm, 55mm and 100mm Long.

44pc Hex, Star & Spline Bit Set - 1/2”Dr

CT3988

Hex : 4, 5, 6, 7, 8, 10, 12mm Spline : M5, M6, M8, M10, M12. Star : T20, 25, 30, 40, 45, 50, 55, 60. TP60, 70 & T80 3/8” & 1/2”Dr Adaptors, Bits 30mm and 75mm long.

CT3541 CT1893 23pc Unique Ribe & Spline Bit Set for VAG Wheel Locks 3pc Brake Servicing Kit 1/2"Dr Pentagon Socket & Bit Set

3pc BMW Rim Lock Set - 1/2”Dr Sizes : 17T x 14.5mm / 10T x 16mm / 21T x 16.5mm

for removing the locking wheel nuts on VAG Vehicles 6 to 17 rib profiles and 10 to 21 point profiles 17mm Alloy Wheel Nut Socket included

www.cannontools.co.uk


Section 2

1/4”Drive Ratchets

CT1776

CT0499

1/4”Dr Palm Ratchet

CT0816

1/4”Dr Stubby Ratchet with Locking Flexi-Head

1/4”Dr Ratchet Heavy Duty

Repair Kit Available - CT0888

CT3196 CT0009

CT0888

Leopard

1/4”Dr Repair Kit

1/4”Dr Curved Ratchet

for Stubby Flexi-Head Ratchet

1/4”Dr Ratchet with Curved Profile

with 72 Teeth Mechanism and Quick Release

Repair Kit Available - CT0882

CT1858

CT0810

CT0882 1/4”Dr Ratchet with Quick Release

1/4”Dr Repair Kit

72 Teeth Mechanism with Small Head Design

1/4”Dr Ratchet

for Curved Profile Ratchet

Locking Flexible Head. Chrome Vanadium Repair Kit Available - CT0885

CT2395

CT1593

CT0885

1/4”Dr Rapid Ratchet 360° Rotating Locking Head.

1/4”Dr Mini Head Ratchet

1/4”Dr Repair Kit

with 72 tooth mechanism and Ergo handle

for Flexi-Head Ratchet

CT3193

CT2837

CT1514

Mustang

1/4”Dr Small Body Ratchet with 72 Teeth Mechanism and Quick Release

CT3199 1/4”Dr Ratchet with Rotating Head CT2410

1/4”Dr Extendable Ratchet Extends from 6” to 8” / 150mm - 200mm

Cobra

1/4”Dr Super Ratchet

1/4”Dr Extra Long Ratchet

36 tooth mechanism 178mm handle and oil resistant grip

with 72 Teeth Mechanism and Quick Release

NEILSEN

Distributed by Cannon Tools Limited


1/4” Drive Accessories CT1600

CT2888

CT2077

3pc Extension Bar Set

4pc Locking Extension Bar Set 9pc Ratchet Driver Set 1/4”Dr with 42 tooth Socket Extension Bars : 90, 150, 250mm. Screwdriver Bit Extension Bars : 90, 150, 250m. Socket and Bit Flexible Extensions : 250mm

Section 2

1/4”Dr - Sizes : 75, 100, 150, 200mm Sprung ball locking mechanism secures sockets

1/4”Dr - Sizes : 75, 150, 225mm

CT1231

CT1230

CT1330 Wobble End

Adjustable Wobble Extension Bar

5pc Extension Bar Set

5pc Extension Bar Set

1/4”Dr - Sizes : 50, 75, 100, 150, 225mm

1/4”Dr - Sizes : 50, 75, 100, 150, 225mm Wobble End

CT1717

CT2303

Go-Thru’

Torque Wrench - 1/4”Dr 20 - 200 in/lb • 23 - 230 cm/kg

1/4”Dr with 6 positions : 190 - 320mm

CT1382 25pc Go-Thru’ Socket Set with 1/4”Dr Adaptor 3” Go-Thru extension bar. Sizes : 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm Go-Thru Sockets : 10, 11, 12, 13, 14, 15, 16, 17, 19mm

CT4040 6pc Nut Driver Set - 1/4 inch Hex Wobble End Sizes : 7, 8, 10, 13mm x 90mm Long with Quick Chuck. CT1903

Magnetic Socket Holder - 1/4”Dr Holds up to ten standard or metric sockets at any angle.

1/4”Dr Torque Wrench 6 - 30Nm with 10 Digital Presets Units : Nm, lb-ft, lb-in, kg-m. Accuracy : +/-2% Audible alert mode. Length : 240mm. Batteries : AAA

www.cannontools.co.uk


Section 2

1/4”Drive Sockets / Socket Sets

CT1568

CT1601

CT3749

11pc SAE Socket Set 11pc Socket Set

1/4”Dr on a Rail Sizes : 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 15/32, 1/2 “

1/4”Dr Sizes : 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm

CT0905

XI-ON SUPER GRAB SOCKETS give totalcontact even on severly worn nuts. Revolutionary inner profile will continue to hold were other sockets would fail.

CT0906

WALL DRIVE

11pc Multi-Fit Socket Set - 1/4”Dr Sizes - 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm Will drive Metric, SAE nuts and Star type fixings

WALL DRIVE

CT2414 Extra 10 & 13mm 12pc Socket Set

12pc Deep Socket Set

1/4”Dr on a Rail Sizes : 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm

1/4”Dr on a Rail Sizes : 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm

CT1602

15pc Xi-on Socket Set - 1/4”Dr on a Rail Sizes : 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 x 2, 11, 12, 13 x 2, 14mm

CT0753

11pc SAE Deep Socket Set 1/4”Dr on a Rack Sizes : 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 15/32, 1/2 “

CT2392

11pc Deep Socket Set 1/4”Dr Sizes : 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm

15pc Xi-on Socket Set - 1/4”Dr

CT2778

CT2844

Sizes : 4, 5, 6, 7, 8, 9, 10 x 3, 11, 12, 13 x 3, 14mm

CT3752

27pc Socket & Bit Set 15pc Socket Set 1/4”Dr Ratchet with 4” Extension Bar Sizes : 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm

NEILSEN

Distributed by Cannon Tools Limited

1/4”Dr Ratchet Sockets : 4, 4.5, 5, 5.5, 6, 7, 8. 9, 10, 11, 12, 13, 14mm Hex Bits : 3, 4, 5, 6mm. Flat Bits : 4, 5.5, 7mm Philips Bits : Ph1, Ph2 Star Bits : T10, T15, T20, T25, T30

84pc Socket & Bit Set 1/4”Dr Ratchet, Screwdriver Bits and Hex Keys. E-Sockets : E4, E5, E6, E7, E8. Sockets : 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm


1/4”Drive Socket Sets CT4145

Section 2

CT1924

CT0746

46pc Socket & Bit Set - 1/4”Dr Ratchet

46pc Socket & Bit Set 1/4”Dr Ratchet with Sockets : 4 - 14mm

34pc Socket & Bit Set - 1/4" Stubby Bit Twister Sockets : 4,5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm Hex 3, 4, 5, 6, 7, 8 . Ph1, 2, 3. Pz 1, 2, 3 Star : T10, T15, T20, T25, T27, T30, T40 1/4" Bit Adaptors - 1/4" & 3/8"Dr.

CT2796

1/4”Dr Ratchet Sockets : 4 - 14mm Hex : 3, 4, 5, 6, 7, 8mm. Flat : 4, 5.5, 7mm Phillips : Ph1, Ph2, Ph3, Pozidriv : Pz1, Pz2, Pz3 Star : T10, T15, T20, T25, T30, T40 Hex Keys - 1.5, 2, 2.5mm. Spinner Handle Sliding T-Bar. 2 Extension Bars 50mm / 100mm Flexible Extension. Universal Joint. Bit Adaptor

Hex : 3, 4, 5, 6, 7, 8mm. Flat : 4, 5.5, 7mm Phillips : Ph1, Ph2, Ph3, Pozidriv : Pz1, Pz2, Pz3 Star : T10, T15, T20, T25, T30, T40 Hex Keys : 1.5, 2, 2.5mm. Spinner Handle Sliding T-Bar. 2 Extension Bars 50mm / 100mm Flexible Extension. Universal Joint. Bit Adaptor

CT0437

CT1387

26pc Socket & Bit Set Ratchet & Sockets : 5, 6, 7, 8, 9, 10, 11, 12, 13mm Hex Bits : 4, 5, 6mm. Flat Bits - 4, 5, 6mm Philips Bits : Ph1, Ph2, Ph3 Star Bits : T10, T15, T20, T25, T30 Extension : 4” / 100mm. Universal Joint

CT1212 48pc Socket & Bit Set 1/4”Dr Ratchet with Sockets : 4 -14mm. Deep 8 - 13mm. Universal Joint and Sliding T-Bar. Extension Bars : 50 and 100mm. Screwdriver Handle with Screwdriver Bits Hex, Phillips, Pozidriv, Slotted and Star.

19pc Multi-Fit Socket Set 1/4”Dr Ratchet Sizes : 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm Spinner Handle. Extension Bars : 50 and 100mm Sliding T-Bar. Universal Joint. For Metric and SAE plus Star type fixings

CT1322

24pc Socket Set 1/4”Dr Ratchet Sizes : 4, 5, 6, 7, 8, 9, 10, 11, 12mm Deep Sockets - 4.5, 5, 5.5, 6, 8, 9, 10, 11, 13mm Extension Bars - 50mm /150mm with Wobble End

CT0911

CT1559

17pc Socket Set - 1/4”Dr Ratchet

16pc Socket Set - 1/4”Dr Ratchet

Sizes : 4, 4.5, 5, 5.5, 6, 6.5, 7, 8, 9, 10, 11, 12, 13mm with 125mm Spinner Handle and 50mm Extension Bar

12 point : 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm Power Bar. Sliding T-Bar, Extension Bars 2” and 6”

40pc Socket Set 1/4”Dr Mini Head Ratchet 16 Standard and Deep Sockets. 3 Extension Bars Flexible Extension. T-Bar 150mm. Universal Joint Spinner Handle. Metric and SAE sizes

www.cannontools.co.uk


Section 2

3/8” Drive Ratchets

CT1777

CT0889

3/8”Dr Repair Kit for CT0817 deleted

3/8”Dr Palm Ratchet

CT0886

3/8”Dr Repair Kit for CT0811 

CT0811

CT3197 CT2617 3/8”Dr Ratchet Adaptor

Leopard

3/8”Dr Locking Flexi-Head Ratchet

3/8”Dr Curved Ratchet

for Sliding T-Bars

with 72 Teeth Mechanism and Quick Release

CT1888

CT0010 CT0960 3/8”Dr T-Style Ratchet

3/8”Dr Ratchet with Curved Profile

CT0883 CT1890

3/8”Dr Repair Kit for CT0010 

3/8”Dr Multi-Angle Ratchet withQuick Release

CT1266 CT1594 3/8”Dr Short Ratchet

3/8”Dr Ratchet 24 tooth with Quick Release

CT2396

with Rotating Head

CT1264 3/8”Dr Ratchet

3/8”Dr Rapid Ratchet

with Rotating Head

360° Rotating Locking Head

3/8”Dr Mini Head Ratchet

CT2616

with 72 tooth mechanism and Ergo handle

3/8”Dr Ratchet

CT1857

with Twister Handle

3/8”Dr Small Head Ratchet

CT2411 CT1694 3/8”Dr Extendable Ratchet 8” - 12” / 210 - 310mm

CT3194

Mustang

3/8”Dr Small Body Ratchet with 72 Teeth Mechanism and Quick Release

NEILSEN

Distributed by Cannon Tools Limited

3/8”Dr Super Drive Ratchet 36 tooth mechanism Flexi-Head. 257mm handle with oil resistant grip.


3/8”Drive Ratchets / Torque Wrenches & Accessories CT3200

CT0737

Cobra 3/8”Dr

3/8”Dr Torque Wrench

Extra Long Ratchet

Torque Range : 5 to 80 ft/lb

Section 2

CT2078

with 72 Teeth Mechanism and Quick Release

3pc Extension Bar Set 3/8”Dr Sizes : 75, 150, 225mm.

CT1154

CT1234

3/8”Dr - 280mm Extra Long Ratchet

CT4041

Extra Long 3/8”Dr Torque Wrench

5pc Extension Bar Set

27 - 135Nm with 10 Digital Presets Units : Nm, lb-ft, lb-in, kg-m. Accuracy : +/-2% Audible alert mode. Length : 460mm. Batteries : AAA

3/8”Dr Sizes : 38, 75, 150, 250, 450mm

CT1235

CT1205 CT1864

Power Bar - 3/8”Dr 15” / 380mm long

Extra Long Wobble End

CT3347 3/8”Dr

Spare Power Bar Head

5pc Extension Bar Set 3/8”Dr Sizes : 38, 75, 150, 250, 450mm

Locking Extension - 3/8”Dr 50mm Ball Type Impact Universal Joint

CT1331

CT1233

CT0923 Adjustable Extension Bar

3pc Impact Extension Bar Set 3/8”Dr Sizes : 75, 150, 250mm

3/8”Dr Wobble End 6 Section Adjustable from 210 - 335mm.

Wobble End

CT1210

6pc Extension Bar Set 3/8”Dr Sizes : 38, 75, 150, 200, 250, 300mm

Extendable Extension Bar 3/8”Dr from 250 to 405mm with Wobble End

CT1904

CT2889

Magnetic Socket Holder For 3/8”Dr Sockets

5pc Locking Extension Bar Set Sizes : 75, 125, 150, 200, 250mm Sprung ball locking mechanism

www.cannontools.co.uk


Section 2

3/8” Drive Sockets

CT3537

CT0907

8pc Universal Joint Socket Set - 3/8”Dr

CT0908

Colour Coded

Colour Coded

10pc

10pc Deep Socket Set

Deep Socket Set - 3/8”Dr on a Rail Sizes : 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

3/8”Dr on a Rail Sizes : 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

Sizes : 10, 1, 12, 13, 14, 15, 17, 19mm

CT1603

CT1604

CT2109

10pc Socket Set -3/8”Dr on a Rail Sizes : 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm with Universal Joint.

CT2108

10pc Deep Socket Set - 3/8”Dr on a Rail Sizes : 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm with Universal Joint.

11pc SAE Socket Set

11pc SAE Deep Socket Set

3/8”Dr on a Rack Sizes : 5/16, 3/8, 7/16, 15/32, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8 “.

3/8”Dr on a Rack Sizes : 5/16, 3/8, 7/16, 15/32, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8 “.

CT1570

CT1571

11pc Socket Set - 3/8”Dr on a Rack Sizes : 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

11pc Deep Socket Set - 3/8”Dr on a Rack Sizes : 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

CT0754

11pc Deep Socket Set - 3/8”Dr on a Rail Sizes : 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

CT2393 XI-ON SUPER GRAB SOCKETS Provides total contact even on severly worn nuts. Revolutionary inner profile will continue to hold were other sockets would fail.

CT1250

CT2416

12pc Deep Socket Set 3/8”Dr in a Metal Box 12 point 9, 10, 11, 12, 13, 15, 16, 17, 18, 19, 21mm

NEILSEN

Distributed by Cannon Tools Limited

12pc Xi-on Socket Set

15pc Deep Xi-on Socket Set

3/8”Dr 3 x 10mm / 3 x 13mm Deep 3 x 10mm / 3 x 13mm

3/8”Dr Sizes : 8, 9, 10, 10, 11, 12, 13, 13, 14, 15, 16, 17, 18, 19, 21mm


3/8”Drive Socket Sets & Special Application Sockets CT0872

CT0874

Section 2

CT3627

12pc Ratchet & Socket Set with 150mm Extension 3/8”Dr Sizes : 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

17pc Deep Socket Set - 3/8”Dr 12 point : 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22mm

17pc Deep Socket Set - 3/8”Dr

CT2843

12 point : 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22mm

CT1116 CT2391

17pc Ratchet & Socket Set - 3/8”Dr 12 point : 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22mm. Extension Bar : 3” / 75mm.

18pc Multi-Fit Socket Set - 3/8”Dr on a Rail

20pc Xi-on Socket Set - 3/8”Dr

Sizes : 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24mm Metric, SAE and Star type fixings

CT3940

CT1783

Sizes : 6, 7, 8, 9, 10, 10, 10, 11, 12, 13, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22mm.

CT4083

8pc BSW Socket Set - 3/8”Dr Sizes : 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8”

14mm 3/8”Dr Thin Wall Spark Plug Socket 12pc Magnetic Socket Set

CT0918

Wall Drive

CT3063

Sizes : 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21 mm

9pc Impact Socket Set

CT4010

3/8”Dr Sizes : 10, 11, 13, 14, 15, 16, 17, 18, 19mm.

3pc Spark Plug Socket Set

12mm Turbo Charger Wrench 3/8"Dr. for VAG vehicles

CT3955

CT3289

Injector Line Socket 17mm 3/8”Dr

Multi-fit Universal Socket

CT0919

3/8”Dr 16 and 21mm with Universal Link T-Handle

CT4027

Wall Drive 9pc Deep Impact Socket Set 3/8”Dr Sizes : 10, 11, 13, 14, 15, 16, 17, 18, 19mm.

3/8”Dr Sizes : 7 - 19mm

CT0916 Triangular Nut Profile Socket Set 3/8" & 1/2”Dr Sizes : 6.5, 7.5, 13, 26mm Special sockets for triangular head bolts necessary for TDI diesel pump internal repairs. Chrome Molybdenum

5pc Nut Remover Set with external hex drives Sizes : 14mm, 15mm, 16mm, 17mm, 19mm

www.cannontools.co.uk


Section 2

3/8” Drive Socket Sets

CT0483

CT1801

4pc Glow Plug Socket Set

6pc Glow Plug Socket Set

Sizes : 8mm, 10mm, 12mm. 72mm long with universal joint and 75mm extension bar.

3/8”Dr 155mm Long Sizes : 8, 9, 10, 12, 14, 16mm with Universal Joints.

CT1247

CT2777

CT1892

6pc Glow Plug Socket Set - 3/8”Dr 155mm Long Sizes : 8, 9, 10, 12, 14, 16mm with Universal Joints.

CT3539

25pc Socket Set - 3/8”Dr Sizes : 6, 7, 8, 9. 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24mm. Spark Plug Sockets : 16 and 21mm. Extensions : 3”, 6” with T-Bar Adaptor. Universal Joint.

CT2770

36pc Socket & Bit Set - 3/8”Dr Sockets : 8 - 21mm with Hex, Phillips, Slotted and Star Bits 150mm Extension Bar. 3/8”Dr x 8mm Hex Bit Adaptor

CT1213

11pc Spark & Glow Plug Socket Set - 3/8”Dr Extension Bars 75mm and 250mm. Spark Plug Sockets : 14, 16, 16 thin wall, 21mm. Glow Plug Sockets : 8, 10, 12mm, 22mm Sensor Socket.

CT0748

23pc Multi-Fit Socket Set 16pc VDE Socket & Bit Set - 3/8”Dr Rated at 1000 Volts. Hex Bits : 4, 5, 6, 8mm Sockets - 8, 10, 12, 13, 14, 17, 19, 22mm T-Bar / Extension Bars : 150, 200 and 250mm

3/8”Dr Socketss : 6 - 24mm. With Ratchet, Sliding T-Bar, Universal Joint and Extension Bars : 75 and 150mm Long. For Metric and SAE plus Star type fixings

CT1254

CT1575

33pc - 3/8”Dr Socket Set with Extendable Ratchet

56pc Socket & Bit Set - 3/8”Dr

61pc Socket & Bit Set - 3/8”Dr

Sizes : 8. 9. 10. 11. 12. 13. 14. 15, 16. 17. 18. 19. 20. 21. 22. 24mm. Spark Plug Sockets : 16, 21mm. Power Handle. Universal Joint. Extension Bars - 75, 150mm.

Sockets : 6 - 24mm. Plug Sockets 5/8”, 13/16” Universal Joint and Extension Bars : 3”, 10”. E Sockets : E4 - E20. Star Bits : T10 - T55.

Sockets - Standard : 6 - 24mm. Deep : 8 - 19mm Flat: 5.5, 7, 8mm. Hex : 3 -10mm. Ph: 1, 2, 3. Pz: 1, 2, 3. Star : T15 - T55

NEILSEN

Distributed by Cannon Tools Limited


Mixed Drive Socket Sets / Tool Sets CT0697

Section 2

CT3748

219pc 1/4“, 3/8", 1/2”Dr Socket Set 94pc Socket & Bit Set 1/4" & 1/2"Dr Sockets : 4mm -32mm Deep Sockets : 6mm - 19mm Spark Plug Sockets : 16 / 21mm 1/4 and 1/2”Dr Ratchets Extension and Sliding T-Bars Flexi-Shaft Extension Universal Joint and Bit Adaptors Screwdriver Bits with Driver Handle

With 1/4”, 3/8”, 1/2”Dr Ratchets Sockets : 4 to 14mm, 10 to 19mm, 10 to 32mm Deep Sockets : 4 to 22mm E-sockets : E4 to E24 Extension bars, Universal Joint and Sliding T-Bar Spanners : 8 to 19mm Screwdriver Spinner handle Bit Holder and Bits Hex Keys

CT1718 CT0978

55pc 1/4 & 1/2”Dr Tool Set

171pc Socket & Bit Set

Sockets : 8 - 27mm Ratchet / Spinner / Bit Holder and Bits Universal Joint and Extension Bar Hex keys / Spanners / Screwdrivers Combination and Water Pump Pliers Ball Pein Hammer

1/4" 3/8” & 1/2"Dr Screwdriver Bits Flat, Hex, Phillips, Pozidriv, Star. 1/4”Dr : 4 - 14mm, 6 - 10mm Deep, E4 - E8 Star 3/8”Dr : 10 - 19mm, 10 - 15mm Deep, E10 - E18 Star 1/2”Dr : 10 - 32mm, 16 - 22mm Deep, E20 . E24 Star

CT3632

121pc Socket & Bit Set 1/4”, 3/8”, 1/2”Dr Ratchets with Sockets : 4 to 13, 9 to 19mm, 20 to 32mm E-Sockets : E8 to E20. Spanners : 8 to 19mm Extension bars, Universal joints and Drive Adaptors Bits, Bit Adaptor and Hex Keys : 1.5 to 10mm Screwdrivers and Oil filter wrench

CT0979

101pc 1/4 & 1/2”Dr Tool Set 1/4” and 1/2”Dr Ratchets and Sockets : 4 - 32mm Deep Sockets : 9 - 13mm. Universal Joints, Extension Bars. Screwdrivers, Bits and Bit Adaptor. Spanners : 8 -19mm. Combination Pliers. Water Pump Pliers. Side Cutters. Crimping Pliers. Ball Pein Hammer. 26pcTerminal Set. Test Pen.

www.cannontools.co.uk


Section 2

1/2” Drive Ratchets

CT1778

CT1155

CT1856

1/2”Dr Extra Long Ratchet 375mm

1/2”Dr Palm Ratchet

1/2”Dr Ratchet with Quick Release Small Head Design with 72 Teeth Mechanism.

CT1595 CT1889

CT0812 1/2”Dr Rapid Ratchet 360° Rotating Locking Head

1/2”Dr Ratchet

1/2”Dr Locking Flexi-Head Ratchet

Quick Release

CT0809

Repair Kit available opposite CT0887

CT1695 CT3201

1/2”Dr Ratchet with Curved Profile 72 Teeth Smooth Action Mechanism Repair Kit available opposite CT0884

1/2”Dr Extendable Ratchet 11” - 17” / 295 - 435mm

CT2397 CT1263

Cobra

1/2”Dr Extra Long Ratchet with 72 Teeth Mechanism and Quick Release

1/2”Dr Mini Head Ratchet

1/2”Dr Ratchet

with 72 tooth mechanism and Ergo handle

CT2412

with rotating Head

CT1336

CT1265

Reversible Ratchet 1/2”Dr 1/2”Dr Super Ratchet 36 tooth mechanism 600mm handle and oil resistant grip

1/2”Dr Ratchet with rotating Head / Short Series.

CT3198

CT3195

CT1238 1/2”Dr Ratchet Jumbo Mustang

Leopard

1/2”Dr Small Boby Ratchet

1/2”Dr Curved Ratchet

with 72 Teeth Mechanism and Quick Release

CT3529

NEILSEN

with 72 Teeth Mechanism and Quick Release

CT3346

1/2”Dr ‘Go-Thru’ Ratchet

1/2”Dr Ratchet

with Rubber Handle

with Flexi-Head

Distributed by Cannon Tools Limited

3 in 1 Ratchet Kit Multi-Variations for Extra Leverage.


1/2”Drive Accessories & Torque Wrenches CT2618

CT0738

CT3547

1/2”Dr Ratchet Adaptor

3pc Torque Adaptor Set Torque Wrench - 1/2”Dr

CT2100

Torque Range 10 to 150 Ft lb

Range : 40 - 200Nm with Electronic Digital display 1/2”Dr with 2 Adaptors 1/2”- 3/8” & 1/2”- 1/4”Dr

CT1332

CT2619

Torque Angle Gauge - 1/2”Dr

Section 2

Adjustable Extension Bar CT0743

1/2”Dr 7 Positions from 250 - 405mm

5pc Preset Torque Wrench Set with Factory Preset Torque Values at 90, 103, 120, 138, 150Nm.

Power Bar - 1/2”Dr 15” / 380mm long with Rubber Handle.

CT2876

CT4042 4pc Locking Extension Bar Set

1/2”Dr Power Bar 24” / 600mm long.

1/2”Dr Sizes : 75, 125, 250, 375mm. Sprung ball locking mechanism secures sockets.

CT3660 1/2”Dr Torque Wrench 1/2”Dr Power Bar 24” / 600mm long.

CT2079

68 - 340Nm with 10 Digital Presets Units : Nm, lb-ft, lb-in, kg-m. Accuracy : +/-2% Audible alert mode. Length : 650mm. Batteries : AAA

CT0764 3pc Extension Bar Set

CT4043

1/2”Dr Sizes : 75, 125, 250mm

CT1237

CT0744 Spare Head for Power Bar CT0764 CT0484

1/2”Dr Torque Wrench 40 - 200Nm with 5 Digital Presets Nm: 90, 110, 135, 160, 190. lb/ft : 65, 80, 100, 120, 140. Audible alert mode. Length : 480mm. Batteries : AAA

Wobble End 5pc Extension Bar Set 1/2”Dr Sizes : 50, 75, 125, 250, 375mm

CT0887 1/2”Dr Hex Wrench

CT1236

Hexagonal Sizes - 3/8 , 1/2, 3/4, 1” Suitable for use with CT3529 opposite.

CT0890

1/2”Dr Repair Kit for Flexi-Head Ratchet

CT0884

1/2”Dr Repair Kit

1/2”Dr Repair Kit

for Stubby Flexi-Head Ratchet

for Curved Profile Ratchet

5pc Extension Bar Set 1/2”Dr Sizes : 50, 75, 125, 250, 375mm

www.cannontools.co.uk


Section 2

1/2” Drive Socket Sets

CT4030

CT1572

CT0755

85mm Magnetic Socket Adaptor

8pc Deep Socket Set - 1/2”Dr on a Rail

1/2”Dr with spring loaded magnet Allows contact through the base of the socket.

Sizes : 13, 14, 16, 17, 19, 21, 22, 24mm

8pc Socket Set

CT4015

1/2”Dr Sizes : 13, 14, 16, 17, 19, 21, 22, 24mm

2pc Spark Plug Socket Set

CT0910

XI-ON SUPER GRAB SOCKETS give total contact even on severly worn nuts. Revolutionary inner profile will continue to hold were other sockets would fail.

CT2417

16mm and 21mm - 1/2"Dr Magnetic . Chrome Vanadium

CT0909 Wall Drive Colour Coded 10pc Deep Socket Set

12pc Xi-on Socket Set Standard & deep

1/2”Dr Sizes : 13, 14, 15, 16, 17, 18, 19, 21, 22, 24mm

10pc Socket Set

CT0873

1/2”Dr 3 x 10mm and 3 x 13mm

1/2”Dr Sizes : 13, 14, 15, 16, 17, 18, 19, 21, 22, 24mm

CT2250

CT0871

17pc Socket Set 1/2”Dr 12 point on a Rail Sizes : 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30mm

15pc Deep Socket Set 1/2”Dr 12 point 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24mm

CT1117 CT1249

1/2”Dr on a Rail Sizes : 10 x 2, 11, 12, 13 x 2, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32mm

CT2394

For Metric and SAE plus Star type fixings

21pc Socket Set - 1/2”Dr Sizes : 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32mm

NEILSEN

20pc Xi-on Socket Set

Distributed by Cannon Tools Limited

18pc Multi-Fit Socket Set 1/2”Dr Sizes : 10, 11, 12, 13, 14, 15,16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30mm

20pc Xi-on Deep Socket Set 1/2”Dr Sizes : 10 x 2, 11, 12, 13 x 2, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32mm


Section 2

1/2”Drive Socket Sets & Special Application Sockets CT2251

CT2776

CT1215

20pc Socket Set - 1/2”Dr Ratchet

25pc Multi-Fit Socket Set

Sizes : 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 22, 24, 27, 30, 32mm. Universal Joint. 15” Power Bar / 380mm Extension Bars - 5” and 10” / 125 and 250mm

1/2”Dr Sizes : 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 27, 30, 32mm Ratchet with Quick Release. Universal Joint Extension Bars 125 and 250mm. Sliding T-Bar. For Metric and SAE plus Star type fixings

Xi-on Socket Demonstration Set Xi-on Super Grab Sockets give total contact even on severely worn nuts. Revolutionary inner profile will continue to hold were other sockets would fail.

CT2842

CT1339

Extendable Ratchet

CT2771

19pc Socket Set - 1/2”Dr with Ratchet and 5” Extension Bar Sizes : 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 27, 30, 32mm

26pc Socket Set 1/2”Dr Sizes : 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 27, 30, 32mm Extendable Ratchet - 295 to 435mm L Type Handle. Sliding T-Bar - 250mm. Universal Joint 5” / 125mm Extension Bar. Plug Sockets 16 and 21mm.

CT1340

20pc VDE Socket & Bit Set - 1/2”Dr Insulated VDE set rated at 1000 Volts Hex Bits : 4, 5, 6, 8, 10mm. Sockets : 10, 11, 12, 13, 14, 17, 19, 22, 24, 27, 32mm 200mm T-Bar. 150 and 250mm Extension Bars

CT1905 Professional Socket sets with Telescopic Ratchet for more leverage

41pc Socket Set 1/2”Dr SAE and Metric Sizes : 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 27, 30, 32mm SAE Sizes : 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 11/8, 13/16, 11/4” Extendable Ratchet. L-Type Handle. Universal Joint. 125mm Extension Bar. Sliding T-Bar. 2 Plug Sockets.

CT3954

CT3956

14mm

CT3957

Magnetic Socket Holder Holds 10 sockets at any angle Sized to hold standard or metric sockets

17mm

CT3958

19mm

6pc Injector Line Socket Set

Injector Line Sockets

1/2”Dr Sizes : 12, 14, 16, 17, 18, 19mm For dismantling injectors on most diesel engines.

120mm long Open 12 point sockets for screwed in Injection Lines found on Diesel Injection Systems

www.cannontools.co.uk


Section 2

1/2” Drive Impact Socket Sets

Deep Impact Sockets CT3163 CT3164 CT3165 CT3166 CT3167 CT3168 CT3169 CT3170 CT3171 CT3172 CT3173 CT3174 CT3175 CT3176 CT3177 CT3178

10 11 12 13 14 15 16 17 18 19 21 22 24 27 30 32

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

CT1915

CT0813

Torque Wheel Wrench

10pc Impact Socket Set - 1/2”Dr

1/2”Dr Sockets - 17. 19. 21mm 1 to 16 Transmission Ratio with 300Nm Max. Torque

CT0814

Sizes : 10, 11, 13, 14, 17, 18, 19, 21, 22, 24mm

CT0694

CT4021

10pc Deep Impact Socket Set - 1/2”Dr

8pc Deep Impact Socket Set - 1/2”Dr Size: 17, 18.5, 20, 21.5, 23, 24.5, 26, 27.5mm for Wheel Lug Nuts with deep internal threads to grip the locking wheel nut or stripped lock on most vehicles.

13pc Deep Impact Socket Set - 1/2”Dr Sizes : 10, 11, 13, 14, 17, 18, 19, 21, 22, 24, 27, 30, 32mm

Sizes : 10, 11, 13, 14, 17, 18, 19, 21, 22, 24mm

CT1093

CT1277

CT1341

5pc Deep Impact Socket Set - 1/2”Dr Sizes : 30, 32, 34, 35, 36mm for Wheel Hub Nuts.

15pc Deep Impact Socket Set - 1/2”Dr Sizes : 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30mm

CT0920

CT3669

3pc Deep Impact Socket Set - 1/2”Dr

5pc Deep Impact Socket Set - 1/2”Dr

Sizes : 17,19, 21mm. Thin Wall and Protective Sleeve for Alloy Wheels.

With Thin Wall and Protective Sleeve for Alloy Wheels. Sizes : 17, 19, 21mm, 7/8” and 13/16”.

NEILSEN

Distributed by Cannon Tools Limited

21pc Deep Impact Socket Set 1/2”Dr Sizes : 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30mm 32, 33, 34, 36, 38mm. Chrome Molybdenum

CT1769

3pc Torque Limited Impact Sockets - 1/2”Dr Sizes : 17, 19, 21mm. Pre-Set to 100Nm / 74ft-lb


1/2”Drive Impact Socket Sets & Special Application Sockets CT3256

CT3160

Section 2

CT3935

22mm 1/2”Dr 150mm Long Oxygen Sensor Socket

Mercedes Wheel Lug Nut Socket

for Lambda Oxygen Sensors.

1/2”Dr x 88mm Applicable to various vehicles which have unique convex lug bolts.

CT1770

CT0540 Wheel Nut Socket 9pc Deep Impact Socket Set 1/2”Dr Sizes : 29, 30, 31, 32, 33, 34, 35, 36, 38mm

21 / 23mm 1/2”Dr For wheel nuts

7pc Oxygen Sensor Socket Set 1/2”Dr Sizes : 22mm or 7/8 inch. 27mm and 29mm. 22mm Wrenches Deep and Shallow

CT2544

CT3912

2pc Wheel Nut Socket Set

CT4011

3” / 75mm 1/2”Dr Heavy Duty Impact Extension Bar

CT1863 50mm 1/2”Dr Locking Extension

CT1098

6pc Deep Impact Socket & Bit Set

1/2”Dr Sizes : 13/16” and 1” Removes locking lug nuts when key is lost or worn.

with Universal Joint

1/2”Dr Sockets - 30, 32, 36mm Hex Bits : 14, 17, 19mm for Drive Shafts

4pc Impact

CT0924

CT1567

Extension Bar Set - 1/2”Dr Sizes : 2”, 3”, 5”, 10” / 50, 75, 125, 250mm

2pc Impact Universal Joint Set

CT0695 2pc Impact Extension Bar Set

CT4228

1/2”Dr Sizes : 125 and 250mm

CT2114

38pc Impact Socket Set

3pc Impact Flip Socket & Extension Set Sizes : 17 x 19mm, 21 x 23mm.

3/8” & 1/2”Dr Standard and Deep Metric and SAE 6 Point Surface Drive 3/8”Dr : 8 - 17mm and 3/8” - 3/4” 1/2”Dr Deep : 10 - 24mm and 1/2” - 1-1/4” 1/2” - 3/8” Adaptor. 2 x 75mm Extension Bars.

119pc Impact Socket & Bit Set 3/8” & 1/2”Dr Sockets : 8 - 22mm Impact Bits : Hex, Phillips, Slotted, Torx Socket Adapters, Extension bars, Universal joints Impact Driver and Bit Adapter

www.cannontools.co.uk


Section 2

3/4” Drive Impact Sockets, Socket Sets & Accessories CT2622

Deep Impact Sockets CT2423 CT2424 CT2425 CT2426 CT2427 CT2428 CT2429 CT2430

CT3291 Ratchet

24mm 27mm 29mm 30mm 32mm 33mm 36mm 38mm

3/4”Dr 20” / 500mm Long

3/4”Dr Torque Wrench Range : 140 - 980Nm with Push Thru’ Head

CT1563

CT1579 Extendable Ratchet 3/4”Dr 60 - 100cm

CT0921

8pc Deep Impact Socket Set - 3/4”Dr Sizes : 24, 27, 29, 30, 32, 35, 36, 38mm

CT1606

22pc Socket Set 3/4”Dr Ratchet, Sliding T-Bar 450mm and Extension Bars - 100mm, 150mm, 200mm. Sizes : 19, 21, 22, 23, 24, 26, 27, 29, 30, 32, 33, 35, 36, 38, 41, 46, 50mm

CT4044

CT1376

Torque Adaptor 3/4”Dr 160 - 800Nm. Units : Nm, lb/ft, kg/m. Accuracy : +/- 2%. Alert mode : LED, audible. Auto shut off : 60 secs. Batteries : AA. Length : 100mm.

CT2371

8pc Impact Socket Set - 3/4”Dr Sizes : 24, 27, 29, 30, 32, 35, 36, 38mm

20pc Socket Set 3/4”Dr with 475mm Ratchet, Sliding T-Bar 460mm. Extension Bars : 125mm and 200mm and Sockets : 19, 21, 22, 23, 24, 26, 27, 28, 30, 32, 34, 36, 38, 41, 46, 50mm

CT2267

CT0149 Torque Wheel Wrench

6pc Impact Socket Set - 3/4”Dr

3/4”Dr Sockets : 30, 32, 33mm 1 to 64 Transmission Ratio with 2400Nm Max. Torque

E-Sockets : E18, E20, E22, E24 12 point Sockets 17 and 19mm

CT0895

CT4013 65mm Socket

20pc Socket Set

3/4”Dr / 12point For Ford Hub Nuts. Chrome Vanadium

3/4”Dr Ratchet, Sliding T-Bar 450mm. Extension Bars - 100mm, 200mm. Sockets : 19, 21, 22, 23, 24, 26, 27, 30, 32, 34, 36, 38, 41, 46, 48, 50mm.

NEILSEN

Distributed by Cannon Tools Limited

3/4”Dr Replacement Power Bar Head for CT0875


3/4” & 1 “ Drive Impact Sockets, Socket Sets & Accessories CT1170

Section 2

Deep Impact Sockets CT2324 CT2325 CT2326 CT2327 CT2328 CT2329 CT2330 CT2331

24mm 27mm 29mm 30mm 32mm 33mm 36mm 38mm

CT0913 15pc Socket Set - 1”Dr Sizes : 36 - 80mm with Ratchet and Extension Bars. CT1781

8pc Deep Impact Socket Set - 1”Dr Sizes : 24, 27, 29, 30, 32, 33, 36, 38mm

CT1916

21pc Socket Set - 1”Dr Sizes : 36, 38, 41, 46, 50, 54, 55, 58, 60, 63, 65, 67, 70, 71, 75, 77, 80mm Ratchet, 200 and 400mm Extension Bars with Sliding T-Bar Adaptor. 1”Dr

Torque Wheel Wrench 1 to 68 Transmission Ratio with 4800Nm Max. Torque with 38mm Socket

CT0875 Power Bar - 3/4”Dr

CT2623

39” / 1 Metre long.

Torque Wrench - 1”Dr Range : 140 - 980Nm with Push Thru’ Head

CT1204 Power Bar 1”Dr 39” / 1 Metre long.

www.cannontools.co.uk


Section 2

Mixed Drive Accessories

CT1566

CT1232

CT3633

3pc Drive Adaptor Set 3/8”F x 1/4”M . 1/2”F x 3/8”M . 1/2”F x 3/4”M

CT2607

Wobble End 5pc Mixed Drive Extension Bar Set Sizes : 50, 75, 100, 150, 225mm with Wobble End

4pc Drive Adaptor Set

3pc Magnetic Socket Adaptor Set 1/4”, 3/8”, 1/2”Dr Strong magnetic tip allows for contact through the base of the socket to hold nuts and bolts in place during use. 1/4”Dr x 37mm, 3/8”Dr x 43mm, / 1/2”Dr x 60mm.

CT1565

1/4”F x 3/8”M . 3/8”F x 1/2”M 3/8”F x 1/4”M . 1/2”F x 3/8”M

CT1768

CT3626

3pc Impact Adaptor Set 3/8”F x 1/4”M . 1/2”F x 3/8”M . 3/4”F x 1/2”M

CT3751 6pc Drive Adaptor Set 1/4”F x 3/8”M . 3/8”F x 1/4”M 3/8”F x 1/2”M . 1/2”F x 3/8”M 1/2”F x 3/4”M . 3/4”F x 1/2”M

CT3243

3pc Torque Limited Impact Dive Adaptor Set

6pc Impact Adaptor Set

3/8”, 1/2”, 3/4”Dr Set to 100Nm / 74ft-lb. Chrome Molybdenum

1/4”F to 3/8”M . 3/8”F to 1/4”M . 3/8”F to 1/2”M 1/2”F to 3/8”M . 1/2”F to 3/4”M . 3/4”F to 1/2”M High quality Chrome Vanadium

CT1564

CT1218 7pc Universal Joint & Drive Adaptor Set 1/4”F x 3/8”M . 3/8”F x 1/2”M 3/8”F x 1/4”M . 1/2”F x 3/8”M

CT0922

3pc Universal Joint Set 1/4”, 3/8”, 1/2”Dr

NEILSEN

8pc Impact Adaptor Set

8pc Impact Adaptor Set

1/4”F x 3/8”M . 3/8”F x 1/4”M . 3/8”F x 1/2”M 1/2”F x 3/8”M . 1/2”F x 3/4”M . 3/4”F x 1/2”M 3/4”F x 1 M . 1”F x 3/4”M

1/4”F x 3/8”M . 3/8”F x 1/4”M . 3/8”F x 1/2”M 1/2”F x 3/8”M . 1/2”F x 3/4”M . 3/4”F x 1/2”M 3/4”F x 1 M . 1”F x 3/4”M

Distributed by Cannon Tools Limited


Mixed Drive Ratchets, Socket Sets & Accessories CT0735

CT1214

Section 2

CT3386

3pc Palm Ratchet Set 1/4”, 3/8” and 1/2”Dr with Rubber Body

Socket Rail Tray with 1/4”, 3/8”, 1/2”Dr Rails

40pc Multi-Fit Socket Set - 1/4" & 3/8"Dr

CT0806

1/4”Dr : 4 - 14mm . 3/8”Dr : 8 - 24mm

CT3797

CT1654 Dual Drive Ratchet - 1/4” and 3/8”Dr Forward and Reverse with 72 Teeth Mechanism

Socket Rails with 1/4”, 3/8”, 1/2”Dr Rails

CT0736

CT1504

40pc Socket Set 1/4” & 3/8”Dr SAE : 5/32" - 17/32" Metric : 4.5 - 13mm + 21mm

Triple Drive Ratchet 1/4”, 3/8” and 1/2”Dr

CT1655

1 Ratchet 3 Drives CT2528

Socket Rail Tray with 1/4”, 3/8”, 1/2”Dr Rails

CT1574

52pc Socket Set SAE 1/4”Dr : 5/32” - 1/2” . Metric - 4 - 13mm SAE 3/8”Dr : 9/16, 11/16, 3/4” Metric Sizes - 14, 16, 17mm +16 & 21mm 1/2”Dr : 10 - 22mm

CT1118

Multi-Drive Ratchet 1/4”, 3/8” and 1/2”Dr 4 in 1 with 1/4” Hex Bit Holder

CT3949

Go-Thru’

Go-Thru’

Socket Rail Tray with 1/4”, 3/8”, 1/2”Dr Rails

CT2621 3 Socket Stands with 1/4”, 3/8”, 1/2”Dr Pegs

17pc Multi-Fit Socket Set with Go-Thru' Ratchet 3/8” & 1/2” Drive Adaptors 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24mm

5pc ‘Go-Thru’ Torque Wrench Set Torque Range : 10 to 21Nm Sockets : 17, 19, 21mm. Deep Socket - 19mm

www.cannontools.co.uk


Section 2

Tool Kits

CT2730 186pc Mega DIY Tool Set Utility Knife, Spirit Level Pick-up tool, Crimping Pliers, Side Cutters, Locking Pliers, Slip Joint Pliers, Long Nose Pliers, Water Pump Pliers. Screwdrivers / Flat - 3 x 75mm, 4 x 100mm, 5 x 75mm. 6 x 38mm, 6 x 100mm, 6 x 125mm, 8 x 150mm. Philips - Ph00 x 75, Ph0 x 100, Ph1 x 75, 2 x 100 Screwdriver Bits : Y-Bit, Flat : 2, 3, 4, 5, 6, 7. Philips : 0. 1. 2. 3. 4. Pozidriv : 0, 1, 2, 3 Hex - 3. 4. 5. 6mm. Star - T10, T15, T20, T25, T30, T35 Spinner Handle and Ratchet Screwdriver Electrical Tester 100V - 250V Electrical Tape, Glue Gun 1/4 inch Drive Sliding T- Bar Adjustable Wrench and Spanners : 6 - 19mm Ratchets : 1/4” and 1/2” Drive 1/4”Dr Sockets : 4 - 13mm 1/2”Dr Sockets : 10 - 30mm Extension Bars, Flexible Extension Bar 1/2 “Dr Spark Plug Sockets 16 and 21mm 2 Universal Joints 3 Way Adaptor Hex Keys : 1.5 - 10mm 12oz Claw Hammer 5M Tape Measuring 2 Nylon Clamps 60 Fasteners

CT2823 206pc Professional Tool Set 18V Cordless Drill, 18V Flashlight, 18V Battery Pack and Charger. 1/4”Dr Sockets : 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm 1/2”Dr Sockets : 10, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24mm 25mm Bit Box with Flat : 3, 4, 5, 5.5, 6, 7. Phillips : 0, 1, 2, 3. Pozidriv : 0, 1, 2, 3. Square : 0, 1, 2, 3. Star : T10, T15, T20, T25, T27, T30. Hex : 2, 3, 4, 5, 5.5, 6mm. Bit holder. Gear Wrench Ratchet Spanners : 8, 9, 10, 11, 12, 13, 14, 15, 17mm. Screwdrivers : Flat : 6 x 38mm, 5 x 100mm, 6 x 100mm, Phillips - 2 x 38mm. 1 x 75mm. 2 x 100mm Hex Keys : 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm. Water Pump Pliers - 200mm. Side Cutters - 150mm. Long Nose Pliers - 200mm. Combination Pliers - 175mm. Utility Knife - 18mm. Knife Blades - 18mm Adjustable Wrench - 250mm. Electric Tester 100 - 250V. Hammer - 300g. 1/4”Dr Ratchet. 1/2”Dr Ratchet. Hacksaw - 300mm. 1/2”Dr Extension Bars - 125. 250mm. 1/4”Dr Extension Bars - 50. 150mm. 3 Way Adaptor. 1/4”Dr Sliding T-bar. 1/2”Dr spark plug sockets 16 mm. 21mm. 1/2” and 1/4”Dr Universal Joints 1/4”Dr Coupler. 5M Tape Measure. 1/4”Dr Spinner Handle. Cables Ties. Scissors. Masonry Drills . Woodworking Drills. HSS Twist Drills. Wood Flat Bits . Nut Drivers.

NEILSEN

Distributed by Cannon Tools Limited


Tool Kits

Section 2

CT3323

7 Drawer Tool Cabinet with Tools ! An ideal companion in your workshop with 5 drawers extensively equipped with tools. 2 large drawers for big tools and machinery. 1/4 . 3/8 . 1/2 Drive Ratchets, Short Extension Bars, Sliding Bars and Universal joints. 1/4” Drive Sockets 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10,11, 12, 13, 14 mm 3/8” Drive Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16,17, 18, 19, 21, 22, 24 mm 1/2” Drive Sockets 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32mm Combination Spanners 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 27, 29, 30 32 mm Deep offset double ring Spanners 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22 mm Side cutters, Combination, Long nose and Grip Pliers. Screwdriver set and Precision screwdriver set Nailer / Stapler including nail assortment. 2 Adjustable wrenches. File Set with Rasp.

CT3279 86pc Tool Kit Combination Pliers, Long Nose Pliers, Side Cutters and Utility knife. Combination Spanners : 8 ,10 , 11 , 12 , 13 , 14 , 17mm Screwdriver Set - Ph2 x 100mm / Ph1 x 75mm Flat 6 x 100 / 5 x 75mm Hex Keys : 1.5 , 2 , 2.5 , 3 , 4 , 5 , 6 , 8 , 10mm Ratchet Screwdriver with Bits : Flat : 3 , 4 , 5 , 6 , 7 Phillips : 1 , 2 , 3 Pozidriv : 0 ,1 , 2 , 3 Star T10 , 15 , 20 , 25 , 27 , 30 Hex 1.5 , 2 , 2.5 , 3 , 4 , 5 , 5.5 , 6mm 3M Tape Measure . 8oz Claw Hammer 1/4” and 3/8”Dr adaptors and Extension Bars 1/4”Dr Sockets : 4 , 4.5 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12mm 3/8”Dr Sockets : 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 , 17 , 19mm With Aluminium Case.

www.cannontools.co.uk


Section 3

Combination Spanners / Special Spanners CT1370

CT1323

6pc Combination Spanner Set 10pc Stubby Combination Spanner Set

Spanners Satin Finish CT0170 CT0171 CT0172 CT0173 CT0174 CT0175 CT0176 CT0177 CT0178 CT0179 CT0180 CT0181 CT0182 CT0183 CT0184 CT0185 CT0186 CT0187 CT0188 CT0189 CT0190 CT0191 CT0192 CT0565 CT0193 CT0194

6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

Mirror Polished Extra Long Sizes : 2 x 10mm 12mm . 2 x 13mm . 14mm

Sizes : 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

CT1319 CT1099 Satin Finish

10pc Stubby Combination Spanner Set

12pc Combination Spanner Set Sizes : 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

Sizes : 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

CT0326

CT0197

14pc Combination Spanner Set

Spanners Super Size CT2780 CT2781 CT2782 CT2783 CT2784 CT2785 CT2786 CT2787

50mm 55mm 60mm 65mm 70mm 75mm 80mm 85mm

Sizes : 6 - 24mm. Satin Finish with Storage Rack

11pc Combination Spanner Set Drop Forged Sizes : 6, 7, 8, 9, 10, 11, 13, 14, 15, 17, 19mm

CT0324 CT4046

CT3945

8pc Combination Spanner Set

5pc VDE Insulated Wrench Set Sizes - 7, 8, 10, 12, 14mm with Open Jaw for use on Hi-Brid Vehicles

Grabs nuts quicker than traditional open jaws.

CT3946

5pc VDE Insulated Ring Wrench Set Sizes - 7, 8, 10, 12, 14 mm For use on Hi-Brid Vehicles

NEILSEN

Sizes : 20, 21, 24, 25, 26, 27, 30, 32mm

Distributed by Cannon Tools Limited

CT1746

6pc Extra Large

14pc Speed Combination Spanner Set

Spanner Set - High carbon Steel

Sizes : 10, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30mm

Sizes : 33, 36, 38, 41, 46, 50mm Chrome plated polished rings and jaws


Combination Spanners CT1211

CT0198

12pc Multi-Fit Combination Spanner Set

14pc Combination Spanner Set - Drop Forged Sizes : 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 17, 19, 21, 24mm

Sizes : 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm Ring End fits Metric, SAE Nuts, and Star type fittings.

CT0087

CT0126

Section 3

Dipped Rubber Sleeves

25pc Combination Spanner Set Sizes : 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 30, 32mm

CT0834 CT0876

25pc Combination Spanner Set Drop Forged Sizes : 6 - 22mm plus SAE 1/4 inch - 7/8 inch 12pc Combination Spanner Set Sizes : 3 x 10, 11, 12, 2 x 13, 14, 15, 17, 18, 19mm Elliptical fully polished. Chrome Vanadium.

CT0088

CT1350

48pc Combination & Ring Spanner Set Combination : 6 to 25mm and SAE : 1/4 to 1 inch. DOE : 6 x 7 to 20 x 22mm and Ring : 6 x 7 to 20 x 22mm.

25pc Combination Spanner Set

CT3803

Sizes : 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 30, 32mm

12pc Combination Spanner Set Sizes : 6, 7, 8, 9, 10, 11, 12, 13, 14, 17, 19, 22mm

CT0795

CT0562

25pc Combination Spanner Set 12pc Combination Spanner Set

Sizes : 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 30, 32mm

Sizes : 6, 8, 10, 12, 13, 14, 17, 19, 22, 24, 27, 32mm

CT0441 CT1324

50pc Spanner Set 16pc Combination Spanner Set

25pc Combination Spanner Set

Sizes : 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22mm

Sizes : 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 30, 32mm

20 Combination Spanners : 6 - 32mm 5 Open Ended Spanners : 6 x 7mm - 14 x 15mm 5 Ring Spanners : 6 x 7 - 14 x 15mm 10 Stubby Spanners : 10 - 19mm 5 C Type Spanners : 10 x 11 - 18 x 19mm 5 S Type Spanners : 10 x 11 - 18 x 19mm

www.cannontools.co.uk


Section 3

Ring Spanners / Ratchet Spanners

CT1745

CT1457

CT1351

Black Nikel Plated

12pc Offset Ring Spanner Set 12pc Offset Ring Spanner Set Sizes : 6, 7, 8, 9, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 26, 27, 28, 29, 30, 32mm.

CT2558

Sizes : 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 27, 28, 30, 32mm.

12pc Offset Ring Spanner Set Sizes : 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 26, 27, 28, 29, 30, 32mm.

CT1119

CT3119

8 in 1 Spanner 8 sizes in Rotating Heads Sizes : 8, 10, 12, 12, 13, 14, 15, 17, 19mm.

5pc Extra Long Ring Spanner Set

Aviation Wrench Set

Sizes : 8, 10, 12, 13, 14, 15, 16, 17, 18, 19mm.

CT1625

5pc Ring Spanner Set Sizes : 8, 10, 11, 13, 14, 15, 16, 17, 18, 19mm.

CT2252

CT2253 3pc Offset Ratchet Ring Spanner Set Sizes : 10 x 11mm, 12 x 13mm, 14 x 17mm Forward and reverse ratchet mechanism

4 in 1 Ratchet Wrench Sizes : 8 x 10mm and 12 x 13mm.

4 in 1 Ratchet Wrench Sizes : 16 x 18mm and 17 x 19mm.

CT1045 CT3497 10mm Ratchet Combination Spanner

CT1624 5pc Ratchet Ring Spanner Set

12pc Counter Display

5pc Offset Ratchet Ring Spanner Set

Sizes : 6 x 8. 10 x 12. 11 x 13. 14 x 17. 19 x 21mm Forward and reverse ratchet mechanism.

Sizes : 6 x 8, 10 x 12, 11 x 13, 14 x 17, 19 x 21mm Forward and reverse ratchet mechanism.

CT1046

CT1618

CT3498 13mm Ratchet Combination Spanner 12pc Counter Display

5pc SAE Ratchet Ring Spanner Set

Offset Ratchet Ring Spanner

Sizes : 1/4”, 3/8”, 1/2”, 5/8”, 3/4” Forward and reverse ratchet mechanism.

10 & 13mm. Forward and reverse ratchet mechanism.

NEILSEN

Distributed by Cannon Tools Limited


Ratchet Spanners CT2381

CT1171 5° Swivel

Spanners

Ratchet Flexi-Head CT2008 CT2009 CT2010

5pc Stubby Combination Ratchet Spanner Set Sizes : 10, 12, 13, 17, 19mm

CT2773

10pc Stubby Combination Ratchet Spanner Set Sizes : 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

CT0215

CT2774 5° Swivel

5pc Reversible Ratchet Spanner Set

CT2011 CT2012 CT2013 CT2014 CT2015 CT2016 CT2017 CT2018 CT2019

8mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm

CT3229

8pc Stubby Flexi-Head Combination Ratchet Spanner Set Sizes : 8, 10, 11, 12, 13, 14, 15, 18mm 72 tooth with a Minimum 5° movement

Section 3

12pc Reversible Combination Ratchet Spanner Set Sizes : 10, 12, 13, 15, 17, 18, 19mm 1/4”Dr x 10mm Bit Adaptor Quick Release Socket Adaptors 1/4”Dr x 10mm, 3/8”Dr x 13mm, 1/2”Dr x 19mm

10pc Flexi-Head Combination Ratchet Spanner Set Sizes : 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

CT1747 CT1546

5° Swivel

Sizes : 8, 10, 12, 13, 14, 15, 16, 17, 18, 19mm 72 tooth with a Minimum 5° movement

CT3224

5° Swivel 19pc Ratchet Spanner Set Only 5° movement With ‘Go-Thru’ Interchangeable Inserts Hex : 8, 9, 10, 11, 12 13, 15, 16, 17mm Star : E8, E10, E11, E12, E14, E16, E18, E20, E22

8pc Flexi-Head Combination Ratchet Spanner Set Sizes : 10, 13, 14, 15, 16, 17, 18, 19mm 72 tooth with a Minimum 5° movement

CT4045 CT3037

13pc 72 Tooth Black Nickel Plated Combination Ratchet Spanner Set Sizes : 8, 10, 12, 13, 14, 17, 19, 21, 22, 24, 27, 30, 32mm

10pc Flexi-Head Extra Long Ring Ratchet Spanner Set

10pc Combination Ratchet Spanner Set

Dual Sizes : 8 to 19mm with Drive Adaptors 1/4”, 3/8 “, 1/2”Dr

Sizes : 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm SAE: 3/8, 7/16, 15/32, 1/2, 9/16, 19/32, 5/8, 11/16, 45/64, 3/4

www.cannontools.co.uk


Section 3

Special Application Spanners

CT3786

CT2382

CT1660

32mm Flare Nut Spanner

32mm Flare Nut Spanner

5pc S-shape Spanner Set

CT2112

Sizes : 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

CT1659

6pc Brake Spanner Set 7/16”OE x 11/32”Sq 1/4”Sq x 516”OE 1/4” x 10mm Sq 1/4” x 7mm Hex 8 x 10mm Hex 9 x 11mm Hex

CT1373 2pc Flare Nut Spanner Set for Thermo couplers

CT1097

15pc Spanner Head Wrench Set - 3/8”Dr Sizes : 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24mm

CT0747

8pc Crowfoot Wrench Set

CT1219

6pc SAE Flare Nut Spanner Set Sizes : 1/4, 5/16, 3/8, 7/16, 1/2. 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 1 inch

CT1424

3/8”Dr Sizes : 10, 11, 13, 14, 15, 17, 19, 22mm

CT1221

10pc Crowfoot Wrench Set - 3/8”Dr Sizes : 10, 11, 13, 14, 15, 16, 17, 18, 19, 22mm

CT2863

8pc Crowfoot Wrench Set 100 & 126mm Extension Bars 1/2” & 3/4”Dr Sizes : 33, 36, 38, 41, 46, 50mm

NEILSEN

Distributed by Cannon Tools Limited

7pc Spanner Head Set with Torque Wrench

6pc Flare Nut Spanner Set

Sizes : 17, 22, 24, 26, 27, 29mm with Interchangeable Heads

Sizes : 6, 8, 10, 12, 13, 14, 15, 17, 19, 21, 22, 24mm

CT3700

CT0199

4pc E-Star Spanner Set Sizes : E6, E8, E10, E12, E14, E18, E20, E24

4pc E-Star Spanner Set Sizes : E6, E8, E10, E12, E14, E18, E20, E24


Section 3

Ratchet Spanners Socket Wrenches T-Handle

CT1130

CT1810

CT2181

8mm

7pc Nut Driver Set SAE Sizes : 3/16”, 1/4”,

CT2182

9mm

5/16”, 11/32”, 3/8”, 7/16”, 1/2”

CT2183

10mm

CT2184

11mm

CT2185

12mm

CT2186

13mm

CT2187

14mm

CT2188

15mm

CT2189

16mm

CT2190

17mm

CT2191

18mm

CT2192

19mm

CT1657

Podger Wrench 17 and 21mm Dual Head Ratchet Wrench

CT2930 CT1386 Podger Wrench 19 and 21mm Dual Head Ratchet Wrench

CT3801

7pc Nut Driver Set Metric Sizes : 6, 7, 8, 9, 10, 11, 12mm

Podger Wrench 19 and 24mm Dual Head Ratchet Wrench

CT2007 CT3860

21mm Spark Plug Spanner 150mm long with tommy bar

21mm Scaffolding Wrench 6pc Swivel Head Socket Wrench Set Sizes : 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

Harden drop forged steel Swivel Head

CT1172 CT0400

Box Spanner 27 x 32mm

21mm Scaffolding Wrench

CT1658

12 Point Swivel Head Harden drop forged steel

CT3358 CT0114 Flexi-Head Socket Wrench

6pc Box Wrench Set 6pc Swivel Head Socket Wrench Set

Sizes : 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17mm

10 - 17mm / 13 - 19mm

CT3733

Sizes : 10, 12, 13, 15, 17, 19mm with Open End

CT2004 6pc BA Box Spanner Set

CT0853

with 3 Tommy Bars. Sizes : 0 x 1, 2 x 3, 4 x 5, 6 x 7, 8 x 9, 10

CT1169

86mm Box Spanner Immersion heater spanner - 3 3/8" A/F.

CT2002

2pc Box Spanner Set 12pc Swivel Head Socket Wrench Set Sizes : 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

Sizes : 9 x 11mm and 12 x 13mm with Bar

86mm Cranked Handle Spanner Immersion heater spanner - 3 3/8" A/F.

www.cannontools.co.uk


Section 3

Adjustable Spanners & Special Application Spanners

CT0053

CT3115

6” / 150mm Adjustable Wrench

4” / 100mm Adjustable Wrench CT3406

CT0302

6” / 150mm Adjustable Wrench

with Measurements on Jaw. Soft Rubber Grip Handle

CT3116 CT0303 8” / 200mm Adjustable Wrench

Stubby Adjustable Wrench

8” / 200mm Adjustable Wrench

with Measurements on Jaw. Soft Rubber Grip Handle

CT3858 CT3117

Wide Mouth Adjustable Wrench

10” / 250mm Adjustable Wrench

10” / 250mm Adjustable Wrench

2 in 1 Adjustable Wrench or Pipe Wrench 8” / 200mm Extra wide 38mm Jaw Capacity.

CT1072

CT0304

with Measurements on Jaw. Soft Rubber Grip Handle

CT0305

CT3118

12” / 300mm Adjustable Wrench 120” / 300mm Adjustable Wrench

4pc Adjustable WrenchSet

with Measurements on Jaw. Soft Rubber Grip Handle

6", 8", 10", 12" • 150, 200, 250, 300mm

CT3693

CT3666

CT0306

15” / 380mm Adjustable Wrench

PUSH ROLL HEAD

CT0307

Spoke Wrench 6 in 1 - 4” / 100mm Jaws are numbered and stepped for ease of use. Spoke Nipple Sizes : 4.2, 4.8, 5.3, 5.6, 6.0, 6.3mm

18” / 460mm Adjustable Wrench

CT3296

4pc Clamp Spanner Set Bike Wrench Sizes : 7 - 17mm

NEILSEN

Distributed by Cannon Tools Limited

4 Wrenches 12 Sizes Metric : 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20mm SAE : 11/32, 3/8, 7/16, 15/32, 1/2, 9/16, 19/32, 5/8, 11/16, 23/32, 3/4, 25/32 inch

CT0495

24” / 600mm Adjustable Wrench


Pipe Wrenches, Basin Spanners & Monkey Pliers CT1326

CT2106

Section 3

CT2557

Basin Wrench 10" / 250mm

Quick Pipe Wrench - 12" / 300mm with 1 hand operation Speed Adjustment CT0308 3pc Pipe Wrench Set

CT1740

10", 15", 18" / 250mm, 380mm, 460mm

Basin Wrench 11" / 280mm

Pipe Wrenches Dipped Handles CT1094 CT1095 CT1096 CT0299 CT0300 CT0301

CT0309

10” 12” 14” 18” 24” 36”

6pc Ratchet Pipe Wrench Set 10, 11, 13, 17, 19, 22mm

Basin Wrench 16" / 400mm

Monkey Pliers Thumbwheel Pipe Wrenches

Look out for Up-dated and New Products on our website www.cannontools.co.uk

Monkey Pliers CT3349 CT3350 CT3351

7” / 180mm 9” / 230mm 12” / 300mm

Pipe Wrenches CT0200 CT0201 CT0202 CT0064 CT0203 CT0204 CT0205

8” 10” 12” 14” 18” 24” 36”

CT2895

Plumbers Step Wrench Hex Sizes : 3/8”, 1/2”, 3/4”, 1” with 1/2”Dr Hex Adaptor for Radiators

CT0484

CT3529 ‘Go-Thru’ Ratchet

Don’t forget to refresh your browser or clear your internet history to see the latest products and changes.

Plumbers Step Wrench Hex Sizes : 3/8”, 1/2”, 3/4”, 1” Suitable for use with CT2895 or CT3529 Handy accessory for Plumbers.

1/2”Dr ‘Go-Thru’ Ratchet with Rubber Handle

www.cannontools.co.uk


Section 4

Pliers - Combination / Long Nose / Side Cutters

CT1104

5pc 4.5” Pliers Side Cutters, End Cutters Bent Nose, Flat Nose and Long Nose Pliers

CT1167

CT0142

CT0961

3pc 8” Pliers

3pc 8” Pliers

8” / 200mm Combination, Long Nose, Side Cutters

8” / 200mm Combination, Long Nose and Side Cutters

CT1166

CT1165

4.5” Mini Combination Pliers

4.5” Mini Long Nose Pliers

4.5” Mini Side Cutters

CT1327

CT1328

CT1271

6” / 150mm Combination Pliers

7” / 180mm Combination Pliers

8” / 200mm Long Nose Pliers

Heavy Duty Handles

Heavy Duty Handles

Heavy Duty Handles

CT0355

CT0354

CT0356

8” / 200mm Long Nose Pliers

8” / 200mm Side Cutters

8” / 200mm Long Nose Pliers

Heavy Duty with Ni-Fe finish

Heavy Duty Ni-Fe finish

Heavy Duty Ni-Fe finish

CT0523

8” / 200mm Bent Nose Pliers

CT1991

CT0217

CT0220

6” / 150mm Combination Pliers

8” / 200mm Combination Pliers

8” / 200mm Side Cutters

NEILSEN

Distributed by Cannon Tools Limited


Pliers - Side Cutters / Cable Cutters CT0489

CT0491

4.5” Mini Combination Pliers

CT0492

4.5” Mini End Cutters

CT0493

4.5” Mini Needle Nose Pliers

CT2463

CT2462

Mini Snips or Wire Cutters

Mini Wire Cutters

Section 4

CT0494

4.5” Mini Long Nose Pliers

4.5” Mini Flat Nose Pliers

CT3649 Optical Fibre Cutters - 165mm For cutting and stripping 125 micron clad optical fibre.

CT3648

CT1611

CT1812

5” / 130mm Wire Cutters and Strippers

Cable Cutter Set - 150mm and 200mm Electricians Scissors will cut thin sheet steel.

CT2271 7” / 180mm Wire Cable Cutters

3pc Side Cutter Set

2pc

For 30-10AWG cable with Spring Return and Lock

6” 8” 10” / 150. 200. 250mm

CT3963

CT3966

6” / 170mm VDE Side Cutters Rated at 1000V

6” / 170mm VDE Cable Cutters Rated at 1000V

Heavy Duty

Heavy Duty

CT2272 8” / 200mm Wire Cable Cutters

CT3964

CT3967

7” / 190mm VDE Side Cutters Rated at 1000V

6” / 170mm VDE Cable Cutters Rated at 1000V

Heavy Duty

Heavy Duty

CT1617 9” / 230mm Wire Cable Cutters

CT3947

CT4124

CT2273 9” / 230mm Wire Cable Cutters

12” / 300mm Double Joint Side Cutters for hard to reach places such as behind interior trim, instrument panels and engine compartment. Very small even when fully opened.

8pc VDE Tool Set 1000V Cable Knife. Spanners : 10, 12, 14mm 6” / 150mm Side Cutters & Long Nose Pliers Screwdrivers - 5.5 x 125mm and Ph2 x 100mm

www.cannontools.co.uk


Section 4

Pliers - Crimping Pliers / Pincers / Wire Strippers / Specialist pliers

CT0524

CT2731

8” / 200mm Wire Strippers

CT2021 Ratchet Crimping Pliers For insulated terminals Red - 0.5 - 1.00mm Blue Channel - 1.5 - 2.5mm. Yellow Channel - 4.0 - 6.0mm

8” / 200mm Tower Pincer

CT3904 CT1005

CT0341 Ratchet Crimping Pliers For insulated terminals Red - 0.5 - 1.00mm Blue Channel - 1.5 - 2.5mm. Yellow Channel - 4.0 - 6.0mm

8” / 200mm Automatic Wire Strippers. Heavy Duty with Wire Cutting and Crimping Capability.

9” / 230mm Tower Pincer with Dipped Rubber Handles

CT4123

CT1422

Carpenters’ Pincers Dipped Handles

200mm Automatic Wire Strippers and Crimpers

CT3215 CT3216 CT3217 CT3218

6pc Ratchet Crimping Pliers with Interchangeable Jaws

10 to 24 AWG / 0.2 - 6.0mm

6” / 125mm 7” / 180mm 8” / 200mm 10” / 250mm

Insulated and non-insulated terminals and connectors.

CT2829 CT4192 End Cutters

7" / 175mm Automatic Wire Stripper

Dipped Handles

Strips up to 25mm from 0.2mm to 6mm. Includes cable cutter

CT3208 CT3209 CT3210

Hydraulic CrimpingTool Set

CT0992

6” / 150mm 7” / 180mm 8” / 200mm

Dies: 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400m Max. Pressure: 16T. Max. stroke: 24mm

CT0990

Tower Pincers Dipped Handles

273pc Crimping Set

CT3211 CT3212 CT3213 CT3214

71pc Crimping Set

Electricians Screwdrivers : 3mm Flat & Ph0 Assortment of cable ties connectors and sleeves.

8” / 200mm Crimping Pliers With assortment of connectors and cable ties.

CT3158

8” / 200mm 9” / 230mm 10” / 250mm 11” / 280mm

CT0576 CT3159

Cable Housing Removal Pliers

NEILSEN

Distributed by Cannon Tools Limited

Relay Removal Pliers

Relay Removal Pliers


Circlip / Snap Ring Pliers CT2413

CT1343

2pc Circlip / Snap Ring Pliers Set 7”/ 175mm Reversible

Section 4

CT2338

5pc Circlip Pliers Set Sizes : 3 Straight Pliers 2 x 90 degree Offset Pliers

CT3981

CT1107 2pc Circlip Pliers Set Extra Large - 16” / 405mm

CT2304 Internal & External Circlip Pliers with Straight and 90° Spare Tips stored in the Handles Go from Internal to External at the flip of a switch Tip Sizes : 90° - 0.047” / 1.2mm Straight - 0.070” / 1.8mm

10pc Circlip Pliers Set

CT3308

CT2337

Straight Tips : 0.038. 0.047. 0.070. 0.090 Bent Tips : 0.038. 0.047. 0.070. 0.090 5” Hook Tool. 5” Pick Tool

2pc Circlip Pliers Set With Spring ratchet locking mechanism. Includes 2 sets of alternative Tips 3.5mm x 90 degree. Capacity - 6.5” to 11.75”

4 in 1 Snap Ring Pliers For Internal and External Rings Straight, 45 and 90 degrees Jaws

CT0981

CT1059 4pc Circlip Pliers Set 13” / 325mm with Straight and 90 degree Tips

CT1459

4pc Circlip Pliers Set Internal straight tip •Internal 90 degree tip External straight tip • External 90 degree tip

4pc Circlip / Snap Ring Pliers 180mm Internal Straight Tip 170mm Internal 90 Degree Tip 180mm External Straight Tip 170mm External 90 Degree Tip

2pc Circlip Pliers Set Extra Long Circlip / Snap Ring Pliers - 10” / 250mm Spring ratchet locking mechanism 16 Replacement tips

www.cannontools.co.uk


Section 4

Hose Ring Pliers / Special Application pliers

CT1452

CT1456

CT1451

3pc Hose Ring Pliers Set Pliers - 3pc - 11” / 285mm

16” / 400mm / 8, 10, 20mm Diameter

Straight / 20 degree Angle / 45 degree Angle

Long Nose Pliers 16”/ 400mm long handle Straight

CT2151 CT0962

CT1453

Pistol Grip Pliers - 3pc Pliers - 4pc 11” / 285mm Straight, 10° Angle, 45° Angle / 90° Angle

Long Nose Pliers 16”/ 400mm long handle 20° Angle

Long Reach 11”, Hose and Cable Pliers Long Nose - Straight. Bent Nose - 90 degree Double leaf spring - Ideal for removing and installing rubber hoses on fuel lines etc

CT2290 CT3007

CT1454

3pc X-type Long Reach Pliers 12” Flat Nose. 13” Long Nose. 13” Bent Nose.

Long Nose Pliers 16”/ 400mm long handle 45° Angle

5pc Long Reach Pliers CT2291

CT1455

11” Straight, 45 degree, 90 degree Offset and 1/2” Hose Pliers

CT4139

Long Nose Pliers

3pc X-type Long Reach Pliers

16”/ 400mm long handle 90° Angle

Sizes : 8, 13, 19mm diameter tips

NEILSEN

Distributed by Cannon Tools Limited

9” Double Ear Clip Pincer


Hose Clamp Pliers / Special Application pliers CT1060

Section 4

CT2588

CT2589

7pc Hose Clamp Pliers Set

9pc Hose Clamp Pliers Set

Swivel Jaw Spring Wire & Band Clip Pliers Flat Band Clamp Pliers Angled Flat Band Clamp Pliers Hose Remover Pliers Clic-R Collar Pliers

Swivel Jaw Spring Wire & Band Clip Pliers Flat Band Clamp Pliers Angled Flat Band Clamp Pliers Hose Remover Pliers. Clic-R Collar Pliers Screwdriver and Hose Pick Tool

CT2584

CT3603

2pc 8� / 200mm Hose Clamp Pliers Set CT2585

Angled Hose Clamp Pliers CT2586

630mm Long Reach Hose Clamp Pliers Flat Band Hose Clamp Pliers CT1385

Swivel Jaw Hose Clamp Pliers CT2587

Designed for difficult access of tag type fixings.

CT1123

Hose Clip Pliers Clic and Clic-R Type For releasing and refitting reusable hose clips.

Hose Remover Pliers Flexible Hose Clamp Pliers

CT3738

For replacing fuel oil and water hose. 630mm wire flex ideal for confined spaces.

CT3933 CT3916

Ratchet Hose Clamp Pliers Jaw Range 22 - 55mm make installing and removing flat-type hose clamps in hidden and hard to reach areas easier. Fits most ring-type or flat-band hose clamps. With ratchet locking mechanism. Special Jaws design to access hose clamps in any position.

Multi-Direction Hose Clamp Pliers 16mm wide head with Ribbed Surface to firmly hold clamps. For Audi / VW fuel line, tank ventilation line clamps, and radiator hose clamps.

Flexible Hose Clamp Pliers Suitable for VAG vehicles with 2.0TDi engines

www.cannontools.co.uk


Section 4

Locking Pliers / Water Pump Pliers

CT3982

CT3965

CT2439

10” / 250mm VDE D4 Water Pump Pliers

10” / 250mm Water Pump Pliers

Rated at 1000V With Locking Slip-Joint and 50mm Capacity Heavy Duty Jaws. Combination Jaws for Hexagonal Round and Square objects

10” / 250mm Self-Adjusting Pliers With Locking Slip-Joint and 60mm Capacity Heavy Duty Jaws. Combination Jaws for Hexagonal, Round and Square objects. Spring loaded for one-hand operation. Perfect for automotive and plumbing jobs. Laminated steel construction. Comfort grip handles

with Slim Jaw

Water Pump Pliers Dipped Handles

CT1614

CT1160 CT1161 CT1162 CT1163 CT1164

10” 12” 14” 16” 20”

CT4169

4pc Water Pump Pliers Set Sizes : 6”, 8”, 10”, 12” • 150, 200, 250, 300mm

CT0418 Welding Pliers 60mm Wide Jaws 280mm Long Carbon Steel

16pc Vice Grip Set CT1203 CT3032

CT3031 Long Nose Locking Pliers 15” / 360mm Long Reach

10pc Multi-Grip Universal Locking Tool - 9.5” Pliers 20” / 500mm Long Reach Long Nose Locking Pliers

NEILSEN

Distributed by Cannon Tools Limited

with 5 Attachments for use as a Quick Clamp Adjustable Grips, Hose Pinch-Off Pliers, and Oil Filter Pliers 53 - 118mm


Grips & Locking Pliers CT1019

CT1460

Section 4

CT1437

5” / 125mm Curved Jaw Grip Wrench

3pc Mini Grip Wrench Set 3pc Locking Pliers Set

CT1021

4” - 5” Curved Jaw, Long Nose and C-Clamp

CT1438

Sheet Metal Clamp - 245mm Welding Clamp - 225mm. Locking C-Clamp - 275mm

9”/ 225mm Long Nose Grip Wrench

CT1461 4pc Grip Wrench Set Curved Jaw 5”, 7”, 10 “ and Long Nose 6.5”

CT1020 4” / 100mm Locking Clamps

CT1022

CT1462 10”/ 250mm Curved Jaw Grip Wrench

3pc Grip Wrench Set

CT0335 6” / 150mm Locking Clamps

5” / 125mm Curved Jaw Grip Wrench

7 inch / 180mm Curved Jaw 6.5 inch/ 165mm Long Nosed Jaw 10 inch / 250mm Curved Jaw

CT0980

CT1463

CT1612

11” / 280mm Locking Clamps 10”/ 250mm Grip Wrench

4pc Grip Wrench Set Curved Jaw 5”, 7”, 10”and Long Nose 6.5”

CT1464 CT1342

CT0336

10”/ 250mm Curved Jaw Grip Wrench

4pc Mini Grip Wrench Set 18” / 460mm Locking Clamps

Curved Jaw 4.5” Long Nose 5” 2 C-Clamps 5”

www.cannontools.co.uk


Section 4

Special Application Pliers

CT3899

CT3900

CT0359

Valve Stem Seal Ring Pliers - 250mm

Valve Stem Seal Ring Pliers - 270mm

For the removal of deep seated valve stem seals. Suitable for most vehicle makes and models

For the removal of deep seated valve stem seals. Suitable for most vehicle makes and models

Spark Plug Terminal Pliers CT3596

CT2319

CT3595

50 - 100mm Piston Ring Pliers

80 -120mm Piston Ring Pliers

110-160mm Piston Ring Pliers

CT3565 CT3909

CT3023

CV Joint Boot Clamp Pliers

CV Joint Boot Clamp Pliers Ear Type

7pc 73 - 111mm Piston Ring Compressor Set

The Handles have 3/8”Dr holes in the handles for use with a torque Wrench

Ideal for installing clamps on fuel filters, CV joint boots and other cooling system hoses

CT1512

CT1586 CT3959

Swivel Jaw Oil Filter Pliers 57 - 120mm Capacity Jaws that swivel 90° in each direction giving 180° movement and 5 variable positions.

Oil Filter Pliers

Oil Filter Pliers

55 - 125mm Capacity Triple Ply Construction

55 - 125mm Capacity Filter Pliers with Slip Joint

CT0762

CT2231

CT2339

12” / 300mm Heavy Duty Fencing Pliers

NEILSEN

Distributed by Cannon Tools Limited

10.5” / 270mm Fencing Pliers

10.5” / 270mm Fencing Pliers

Nail and Staple Extraction, Driving Wire Cutting, Pulling and Wire Squeezing

Nail and Staple Extraction, Driving Wire Cutting, Pulling and Wire Squeezing


Special Application Pliers CT3910

CT0085

Section 4

CT3509

Tube Cutter with 42mm / 1-5/8” Cutting Diameter Ratchet mechanism. For cutting most kinds of plastic. Light aluminium body for easy working.

Fuel Line Pliers For removal and replacement of the connections on the in-line fuel filter on Audi / VW, Fiat, GM, Mercedes vehicles.

Trim Clip Pliers 100mm - Small size for limited access. Glass reinforced nylon with spring handles.

CT2772

CT2096

CT3569

Tube and Trim Cutter

Fuel Feed Pipe Pliers For the removal and replacement of the connections on the in-line fuel filter on Alfa, Audi, Fiat, Lancia, Volvo, Volkswagen.

CT2099

With Multi-Angle Anvil and replaceable Utility Knife Blade. Anvil Markings for 45 to 120 degree Angles. Ideal for cutting Window Gaskets, Picture Mouldings, Plastic Trim, Tubing and Conduit.

Trim Clip Removal Pliers

Exhaust Clamp Pliers

Tile Cutting Pliers or Nippers - 8” / 200mm

CT2072

PVC Dipped Spring Loaded Handles

CT2128

for the removal of Rubber Grommets

For removal of Door and Window clip fixings Prevents damage to door panel. Dipped Handles

CT3861

CT1355

Exhaust Hanger Pliers

220mm Door Handle Clip Pliers

For the quick removal of Staples, Clips, Door panels, Facia and Trim Supports without damage. Easy access for confined areas. Rubber grip handles

CT3983

9½” / 240mm Heavy Duty Leather Punch Sizes : 2, 2.5, 3, 3.5, 4, 4.5mm

CT1793 CT0419 Hog Ring Pliers with Hog Rings for repairing car seats.

Exhaust and Tailpipe Cutter Cuts Pipe from 19mm to 83mm Diameter

9” / 230mm Hole Punch / Leather Punch

Look out for Up-dated and New Products on our website

www.cannontools.co.uk


Section 5

Battery Testers & Jump Leads

CT3392

CT4278

CT4279

14V Multi-Function Jump Starter with LED Light

6 - 12V 2 / 10 / 55 Amp

Battery Charger / Engine Starter Works like 3 battery chargers in one. 2 amp trickle charge for batteries not in use. 10 amp for recharging batteries in 3 to 5 hours. 55 amp for additional cranking power in emergency situations.

Smart Cable Function for Charging Mobile Phones etc. Capacity : 15000mAh Output : USB 5V Output : 12V Output : 19V / 3.5V Size : 189 x 80 x 37mm

12 / 24V Multi-Function Jump Starter For charging Mobile Phones etc. with LED Light 30000mAh. Input : 14V / 2A. Output : 5V, 12V/10A

CT3387

CT0408

CT3657 12 Volt Battery Testing LED light display. Weight 95g

CT2098 6, 12, 24V Battery Charger Single-phase portable battery charger. Protected against overload and polarity reversal. Equipped with ammeter. Fast and slow charging facility with overcharging protection.

Jump Leads 3M 800 amp CE Approved Booster Cable ideal for Commercial and Private Vehicle use with Heavy Duty Spring Clamps. Supplied with Zip Storage Case.

CT0409

125 amp Battery Tester

CT3393

For Conventional and Maintenance Free Batteries on Cars, Motorcycles, Vans, Light Trucks. Battery Load Tester and Charging Tester. Automatic Timed Shut-Off. Tests 12V Batteries up to 1000cca. Polarity Check Function with Bright LED.

Jump Leads 6M 800 amp CE Approved Booster Cable ideal for Commercial and Private Vehicle use with Heavy Duty Spring Clamps. Supplied with Zip Storage Case.

CT0375 CT2134

Jump Leads 2.5M 120 amp Light Duty Booster Cables .

CT0378 12 Volt Digital Battery Tester

Battery Charger and Jump Starter For charging 12V - 24V batteries - 5 / 10 / 20 / 40amp. With 200 amp 12V emergency start capability. Voltmeter and Ammeter gauges. 3 hour charge with hold function for continuous charging. Automatic shut-off with built in timer. 72” Copper coated aluminium wire cables. 6” wheels for easy manoeuvrability. Fan cooled unit for longer life.

NEILSEN

Distributed by Cannon Tools Limited

125A digital battery load tester for 12V DC lead acid batteries. Quick and easy to use digital display and battery condition LEDs give a very clear indication of the test results. Includes inbuilt starter crank test procedure and CCA setting 200 - 1000 to enable the unit to be set to the battery ’s cold cranking amp rating. Heavy duty insulated clamps. Test for excessive starter current draw. Test for trucks and cars. Test for charger. Test for battery voltage. Fast 10 second load test

Jump Leads 2.5M 600 amp Booster Cable ideal for General Motoring. Leads have Insulated Steel clips with Large Integral Springs. 100% Low Resistance Multi Stranded Copper Cable Means a Minimal Voltage Drop.


Battery Equipment & Circuit Testers CT3066

CT3266

Section 5

CT3065

3V Continuity Tester Battery Hydrometer

Battery Tester

For Hot or Cold testing of Lead Acid Batteries. Range 110SP Discharged to 1300SP Fully Charged.

for 6, 12, 24V DC circuits. Knurled metal body with test light. Probe tip is covered with protective screw cap. Tester illuminates when voltage is present. Supplied with cable and alligator earth clip.

CT1771 Battery Terminal Cleaner

1M Insulated Cable and Clip. Requires 1 AA Battery - Not included

CT0786

CT3267

3 - 28V Cordless Circuit Tester

Fits all terminal posts

With Audible Buzzer, ideal for ECM Sensors, Transducers, Airbags Etc. No Ground Wire or Clip Required. Alkaline batteries supplied

Battery Tester 2 - 24V Batteries. This vehicle battery tester is for detecting faults in low tension circuits.

CT2828

CT3064

CT3226 6 - 12V Circuit Tester

Battery Terminal Clamps Saddle Type suitable for positive and negative battery posts

Battery Tester Voltage Range : 2.0 - 13.5V LED lights up to the Voltage reading. Frequency range: 0 to 60 Hz.

CT3719

With 900mm insulated cable and earth clip. Insulated contact point prevents accidental shorting. Check for presence of voltage quickly and easily.

CT3937 CT0653 12 - 42V Circuit Tester

Battery Terminal Cut Switch Universal Car Battery Isolator Cut-Off Switch for Standard Round Post Batteries.

Blue LED for 12 Volt. Red LED for 42 Volt. Safe for low current circuits. Tester only draws 3 milliamps. For General and Hybrid Vehicles.

3 / 15V Circuit Tester 3V - 15V Computer Safe Circuit Tester

CT1785 CT4122

CT2083

Battery Terminal Puller Fits most terminal posts. Also suitable for some alternator bearings.

CT1772

6 - 12V Circuit Tester For Testing DC Circuits on Cars Heavy Duty Cable with Earth Crocodile Clip with Insulated Contact Point to Prevent Accidental Shorting

3 - 48 Volt DC Digital LCD Circuit Tester Computer Safe with backlit LCD display Cable length : 11ft uncoiled Current Draw : 3 - 20V / 17mA, 20-48V /10mA For positive and negative electrical charge.

CT1100

CT3263 Battery Carrier Automatically Adjusts to Battery Size Non-Scratch Rubber Grip Jaw Pads Maximum Battery Width - 8� / 200mm

6, 12, 24V Circuit Tester Heavy Duty 5ft Lead with Insulated Ground Clip

AC / DC Voltage Tester Range : 12V DC - 230V AC Digital LCD Display with Back Light

www.cannontools.co.uk


Section 5

Automotive Diagnostic Equipment

CT3225

CT3778

CT3779

12V Circuit Tester With Flexible Probe and Sender Unit. For Wire Tracing, Checking for Short Circuits. Locating Open Circuits. Battery Voltage Indicator.

CT2917 Automotive Data Scanner - Brakes Oil Service Diagnostic Kit for service operations you should perform each year. Works on the latest 2014 models. Compatible with global OBDII / EOBD Cars, SUVs, Minivans and Light-duty Trucks. Resets Oil Inspection and Service Lights. Full details on website.

The Electronic Park Brake Service Tool is designed to allow the service and maintenance of brake systems on multiple brands of vehicles where electronic brake systems are fitted. Compatible with global OBDII / EOBD Cars, SUVs, Minivans and Light-duty Trucks. De-activates and re-activates brake control systems. Full details on website.

CT3780

CT3781

Automotive Data Scanner - Oil 6 - 24V Auto Circuit Tracer & Detector Designed to identify and trace wires or cables without damaging the insulation - you just simply attach the sender unit to the circuit and follow the wires using the flexible detector. Requires 2 x 9V batteries ( Not Supplied )

CT2527

Automotive Data Scanner - Diesel

Multi-Function Audible Auto Tester Voltage Testing. Polarity Testing. Continuity Testing. Ignition Pulse Frequency. Peak Detection

The VAG OBD scanner is the most powerful tool for VW / AUDI vehicles on the road today. Delivers OE-level diagnosis on all available control modules. Compatible with Audi, Seat, Skoda, VW OBDII / EOBD Cars, SUVs , Minivans and Lightduty Trucks. Works on engine, airbag, ABS, A/T, instrument cluster and so much more. Full details on website.

Digital Common Rail High Pressure Tester. State of art technology for measuring the pressure on common rail diesel systems. Dynamic test - measures actual pressure in common rail circuit with engine running. Maximum pressure test - checks high-pressure pump and compares with manufacturing values. Full details on website.

CT3227

CT3782

CT3783

Automotive Data Scanner - ABS

Automotive Master Data Scanner

Automotive Data Diagnostic Kit for ABS and Airbag Reseting providing extensive coverage of vehicles but also provides accurate and professional diagnosis of ABS and airbag faults. Works on the latest 2014 models. Compatible with both OBDI and OBDII Cars / SUVs / Minivans and Light-duty Trucks. Full details on website.

Automotive Diagnostic Kit for all System Oil Light Reset EPB Service. Works on the latest model up to 2014. Advanced EPB functionalities on 13 manufacturers. Compatible with both OBDI and OBDII Cars, SUVs, Minivans and Light-duty Trucks. Reads and clears codes on all systems. Full details on website

Automotive Data Scanner - VAG 12 - 24V Audible Auto Tester

Automotive Multi-Tester Probe Test Circuits, Continuity, Polarity and Voltage. Check Lamps and Electric Motors. Checks interior and exterior lights. Checks Relays and power windows. Find short circuits and bad earths fast. Finds open or disconnected parts. Test the positive and negative voltage. Tests continuity in switches, relays, diodes, fuses and wiring harnesses. Polarity test for cables and sockets.

NEILSEN

Distributed by Cannon Tools Limited


Automotive Diagnostic Equipment CT2835

CT1187

Section 5

CT3219

0hms AC/DC Amps AC/DC Volts DC Milli-volts Diode Check

Analogue Multi-Meter

Digital Multi-Meter

For the measurement of DC voltage, AC voltage, DC current, Resistance, Battery and Decibels. Operates at an ambient temperature from 0°C to 50°C with a relative humidity of less than 85%

Digital Clamp Meter

For the measurement of DC voltage, AC voltage, DC current, Resistance, Battery and Decibels. Operates at an ambient temperature from 0°C to 50°C with a relative humidity of less than 85%

Voltage - 2 / 20 / 200 / 1000V DC. LCD Screen with Data Hold Function. Low Battery Indicator and Overload Protection. Audible Continuity. 9V Battery Included.

CT1955

Electronic Stethoscope Kit

CT1960

CT3235

Digital Inspection Camera

Digital Inspection Camera

Cushioned headphones. Super sensitive microphone pick-up. Flexible non conductive shaft. 4 Pick-up sensors with 4.8 metre long cord. Detect and identify noisy components enabling road test diagnosis. Batteries included.

Borescope with 3.5” TFT LCD Monitor and 2M Cable / Probe Diameter - 5.5mm NTSC and PAL Recording Format ASF 320 x 240 Pixels Res. 30 FPS Frame Rate. CMOS MPEG4 Format, Image Format - JPEG 640 x 480 pixels. Mini USB 1.1 AV out or Records on SD card up to 2Gb AV Jack / DC Jack / USB slot / Light Switch Power - 5V DC 3.7V Li-Polymer Battery

CT2916

CT0998

Automotive Stethoscope Designed to detect unusual mechanical noises generated from the bearings, shafts and tappets etc.

Mechanic's Stethoscope Metal Probe extends to 350mm. Heavy duty flexible vinyl tubing.

Borescope with 2.4” Colour LCD Display 640 x 480 JPEG resolution. 16mm CMOS image probe. 38” watertight flexi shaft with Oil and Scratch resistant glass lens. LED lights.

CT3388

Engine Timing Light Voltage - 12V / 10W with Digital Display Test rotation speed and advance angle. Max Test Angle - 90°. Precision - 0.1°C.

www.cannontools.co.uk


Section 5

Automotive Fuses, Testers & Terminal Tools CT2400

Mini Fuse Sets 10 per set CT2401 CT2402 CT2403 CT2404 CT2405 CT2406 CT2407 CT2408

2 5 7.5 10 15 20 25 30

amp amp amp amp amp amp amp amp

CT2398

Fuse Puller and Tester

12pc In-line Fuse Holders

2 x LR41 Batteries

CT3419 CT0991 100pc Cable Connectors

CT0458

Assortment Box

Fuse Buddy Tester Measure current at the fuse box of standard blade fuses. Ideal for fault finding on automotive electrical circuits. The Fuse buddy Tester connects directly into the fuse socket. Measuring 0 - 20 Amps / 19.99V DC or AC. CE certificated and RoHS compliant.

50pc Auto Fuses

36pc Butt Connector Kit

Assortment Box

CT2073

Waterproof Heat Shrink Sleeves

CT2415

80pc ‘Mini’ Auto Fuses with 2, 5, 7.5, 10, 15, 20, 25, 30 amp Fuses.

CT1640

12pc Terminal Tool Kit For the Removal of Wires from Terminal Blocks without Damage. Various Cable Extractor Tools for most vehicles. Tools Fold in to Handle to Protect Points and Tips.

CT4079

120pc ‘Mini’ Auto Fuses with 5, 10, 15, 20, 25, 30 amp Fuses.

5pc Wire Installation Kit For moving and extracting cables and electrical components. Also prying open control panels, inspection covers and plastic case assemblies.

CT4102 CT2399

24pc Auto Fuses

CT2268

20A, 30A, 40A, 50A, 60A, 70A, 80A, 100A Size: 30 x 35 mm Contact distance : 8 mm

CT2923 127pc Heat Shrink Sleeves Sizes : 2.0 x 40mm 2.5 x 40mm 3.5 x 40mm 5.0 x 40mm 7.0 x 80mm 10.0 x 80mm 13.0 x 85mm.

CT2409 180pc Colour Coded Heat Shrink Sleeves Sizes : 2, 3.5, 5, 7, 8, 9mm Water Resistant Insulation for over exposed wiring and Electrical Connections. Ideal for Automotive use.

CT2122

50pc Fast Splice Connectors 25 Red 18 - 22 AWG / 25 Blue 14 - 18 AWG Quickly splices wires without stripping first.

NEILSEN

Distributed by Cannon Tools Limited

5 Rolls of PVC Electrical Tape


Alternator & Spark Plug Tools CT1190

CT2110

CT4004 2pc Spark Plug Thread Chaser

13 Blade Feeler Gauge

Section 5

Sizes. 10 x 12mm and 14 x 18mm

Range. 0.05 - 1.0mm

CT2233

4pc Spark Plug Socket Set 3/8”Dr sizes: 14, 16, 18, 21mm with Universal Joint.

CT3421 CT3063

Spark Indicator Tests without punturing wire. Flashing bulb indicates spark.

Spark Plug Re-Thread Set - 10mm

CT2232

CT4121

3pc Spark Plug Socket Set

Cleans and Rethreads Spark Plug Ports. Includes Tap and 4 Inserts : 3/8, 7/16, 1/2, 3/4”

3/8”Dr 16 and 21mm with Universal Link T-Handle

CT2007

21mm Spark Plug Spanner

Spark Plug Re-Thread Set - 14mm

In-line Spark Indicator

150mm long with tommy bar

Cleans and Rethreads Spark Plug Ports. Includes Tap and 4 Inserts : 3/8, 7/16, 1/2, 3/4”

High Tension Lead and Spark Plug Ignition Tester. Probe Length : 55mm Lead Length : 100mm

CT3377 CT3450

CT0359 22pc Alternator Service Set Spark Plug Terminal Pliers

Spark Plug Thread Restorer

For the safe removal and Installation of HT leads without damage to cables

Restores the internal thread on spark plug appertures

CT3417 CT0283

3/8”Dr & 1/2”Dr Bit Adaptor BOSCH alternator tool kit for Audi / BMW / Mercedes / Fiat / Ford / Renault / Seat and VW. Permits easy removal of freewheel alternator pulley either on or off the vehicle. Allows alternator shaft to be held while the pulley retainer is removed. Complete range of combination Star, Spline and Hex Bits to fit most alternators.

CT3953

4pc VW Spark Plug Puller Set For installing and removing ignition coils with power stage on 1.4 / 1.6 litre. 4 / 5 Cylinder Passat. 5 / 6 Cylinder Bora and Golf. 6 Cylinder Sharan. 6 Cylinder Touareg and Phaeton. 8 / 12 Cylinder engines.

25pc Spark Plug Thread Repair Kit Incorporates taper and plug taps together with integrated reamer. Stepped tap ensures correct alignment of cutter in existing spark plug hole. Extension tools allow easy access to the bottom of the plug recess. Includes plug coil inserts.

Alternator Stretch Belt Tool Kit For Mounting and Dismounting Stretch Belts without Damaging Pulleys and Belts. Belt Installers : 32, 45, 50mm Diameter. Self Locking Nut and M8 Fixing Nut and Screws

www.cannontools.co.uk


Section 5

Glow Plugs & Oxygen Sensor Sockets

CT3664

CT2111

Lambda Oxygen Sensor Socket

2pc Oxygen Sensor Thread Chase

22 x 100mm 1/2”Dr

Sizes : M12 x 1.25 and M18 x 1.5.

CT3160

CT4016

Lambda Oxygen Sensor Socket

3pc Glow Plug Socket Set

22 x 150mm 1/2”Dr

Sizes : 8, 9, 10mm Allows access to Glow Plugs where cable restricts access. Chrome Vanadium. Applicable to Fiat / GM vehicles

CT0436

CT0483 2pc Oxygen Sensor Socket Set 22mm and 7/8”. 3/8” & 1/2” Drive

CT3685

3pc Diesel Oxygen Sensor Socket Set 28mm Injector Socket 1/2”Dr 12 point 7/8” Injector Socket 1/2”Dr 12 point 7/8” Long-reach Vacuum Switch Socket 1/2”Dr 6 point

CT3761

4pc Glow Plug Socket Set

22mm x 80mm Deep 3/8"Dr 22mm x 31 mm Offset 3/8"Dr 22mm x 50mm Offset 1/2"Dr Octagon Drive, 22mm. Thread Chasers : M12 x L25mm / M18 x 1.5mm

Universal Glow Plug Extractor Kit T-bar slide hammer. Internal expansion collet puller. Sizes : 2.7mm, 3.6mm, 5.0mm, 6.0mm.

CT4003

33pc Glow Plug Thread Repair Kit Taps : M8, M10, M10, M12, M12, M14 With Taps, Insert Drivers, Tap Guide Pins and Thread Inserts Insert Guide Rod and Knurled Head For damaged cylinder head glow plug threads.

3/8”Dr Sizes : 8, 10, 12mm. 72mm long Universal Joint 75mm extension bar. For all popular glow plugs.

CT3381

CT1801

Glow Plug Removal Set

6pc Glow Plug Socket Set

For Removing Damaged or Difficult 8 and 10mm Glow Plugs from the Cylinder Head.

CT3188

with Universal Joints. 3/8”Dr 155mm Long Sizes : 8, 9, 10, 12, 14, 16mm

CT1892

5pc Oxygen Sensor & Thread Chaser Set

CT4087

6pc Glow Plug Socket Set with Universal Joints. 3/8”Dr 155mm Long Sizes : 8, 9, 10, 12, 14, 16mm

CT3539

Glow Plug Puller and Reamer Set For pulling out pre-heated plugs after they have been unscrewed but are still located firmly in their holes. Reamer for 8mm plugs - M10 / 1.5. Reamer for 10-12mm plugs - M12 / 1.75

CT4063 Glow Plug Electrode Removal Set

CT3786 Oxygen Sensor Wrench 7/8 in. / 22mm with Swivel Head

11pc Spark Plug & Glow Plug Socket Set Extension Bars 75mm and 250mm. Spark Plug Sockets : 14, 16, 16 thin wall, 21mm. Glow Plug Sockets : 8, 10, 12mm, 22mm Sensor Socket.

NEILSEN

Distributed by Cannon Tools Limited

For M8 and M10 glow plug threads M8 x 1.0, M10 x 1.0, M10 x 1.25 M3 x 0.5 and M4 x 0.7 Tap 100 mm Drills : 2.5 x 120 mm, 3.3 x 140 mm 180 mm pulling bolt


Fuel Injector Cleaning, Threading & Testing CT0837

CT4029

CT0590 17mm Diesel Injector Wrench Ideal for injectors that have difficult access Twin hexagon profile suitable for most diesel engines. Chrome Molybdenum

M8 Glow Plug Thread Repair Kit M8 x 1.0 Taps for repairing M8 glow plug threads. With 5 x 12mm Deep Coil Inserts.

Section 5

CT3954

Diesel Injector Nozzle Tester . 90mm Ø pressure gauge reading 0-60 MPA with M12 x M12, M12 x M14, M12 x M16, M12 x M18 pipes. For the adjustment and calibration of injector nozzle opening pressure and to carry out leakage, spray pattern and chatter characteristic tests. For nozzle size - R, S, T.

CT0839 6pc 1/2”Dr Injector Line Socket Set Sizes : 12, 14, 16, 17, 18, 19mm x 100mm Deep For dismantling injectors on most diesel engines.

M9 Glow Plug Thread Repair Kit M9 x 1.0 Taps for repairing M9 glow plug threads. With 5 x 12mm Deep Coil Inserts.

CT0843

CT3956

14mm

1/2”Dr

CT3955

17mm

3/8”Dr

CT3957

17mm

1/2”Dr

CT3958

19mm

1/2”Dr

Injector Line Sockets 120mm long Open 12 point sockets for screwed in Injection Lines found on Diesel Injection Systems

M10 Glow Plug Thread Repair Kit M10 x 1.25 Taps for repairing M10 glow plug threads. With 5 x 12mm Deep Coil Inserts.

CT3422

12V Fuel Injector Tester Works on injectors individually to diagnose fuel delivery problems on petrol vehicles with electronic fuel injection. Large LED display with 4 Pulse Modes.

CT1951 CT3145

CT0855

7pc Diesel Injector Seat Cutter Set M10 Glow Plug Thread Repair Kit M10 x 1.0 Taps for repairing M10 glow plug threads. 5 x 12mm Deep Inserts. 5 x 19mm Deep Inserts.

9pc Noid Light Set

For re-facing the diesel injector seat in order for the new or reconditioned injector to be fitted correctly. Various cutters are available for nearly all diesel cars.

Electronic Fuel Injection Test Light Set. Quickly and Easily tests electronic fuel injection systems Bosch PFI GM PFI. Ford TBI. GM TBI. Geo TBI. GM SCPI GM Multec 2 Gm-1987. GM-1982 equipped vehicles

CT4085

CT4060

17pc Diesel Injector Seat Cleaning Set

Diesel Injector Seat Cleaning Set

Reamer Sizes : 14, 15, 17, 19mm For efficient cleaning of injector ports and seating before changing or when reconditioning diesel injectors. Helps to avoid blow-back due to poorly seated injectors. Suitable for most vehicles with Reamers for a wide range of vehicles.

For cleaning injector ports and seating before changing or when reconditioning diesel injectors. Helps to avoid blow-back due to poorly seated injectors. Suitable for most vehicles. With Cleaning Brushes, Injector Seat Cutters and Seal Puller.

CT0863

M12 Glow Plug Thread Repair Kit Thread Repair Kit for Glow Plugs - M12 x 1.25 M12 x 1.25 Taps for repairing M12 glow plug threads. 5 x 12mm Deep Inserts. 5 x 19mm Deep Inserts 5 x 26mm Deep Inserts

www.cannontools.co.uk


Section 5

Fuel Injector Service Tools & Kits

CT4054

CT2101

CT3151

Fuel Injector Puller BMW Fuel Injector Remover For the removal and installation of high pressure injectors with hold down top found in the BMW N20 and N55 engines.

With M8, M12, M14 Adaptors. For Removal of Bosch and Lucas Diesel Injectors.

Designed for the quick and precise extraction of Injection Nozzles from Diesel Engines. Suitable for Audi - VW diesel vehicles - SDI / TDI / PD.

CT2790 CT3447

7pc Fuel Injection Puller Set - VAG TDI

HGV Diesel Fuel Injector Nozzle Socket

CT3507 Fuel Injector Gasket Puller

For t diesel injector nozzles on MAN, Mercedes and Sania Trucks Use with a 22mm Spanners.

For the removal of the copper ring gaskets on fuel injectors . 230mm Long. 40CR

CT3413

CT0358

4pc Diesel Truck Injector Socket Set

Diesel Fuel Injector Puller

70mm 4 Teeth with M14 x 1.5mm receiver thread. 72mm, 120mm 4 Teeth. 120mm 3 Teeth for injectors with electrodes . For MAN, Mercedes, Iveco, Renault and Scania.

For the removal of stubborn diesel injectors on Mercedes CDI engines. Features injector cap removal socket / security hex key for removing the inner part of the injector and a puller to remove the injector without damaging the cam cover. For C-Class

CT3762

CT3189

4pc Diesel Truck Injector Socket Set for working on nozzle holders 1/2” Dr Socket - 72mm long with 4 teeth 2 Sockets with 32mm outer hexagon and 4 teeth 1/2”Dr Socket - 120mm long with 3 teeth

CT3542

Fuel Injector Master Service Kit A Comprehensive Tool Kit with just about everything you need to extract Fuel Injectors.

CT3154

14pc Fuel Injection Puller Set 9pc Fuel Injector Extractor Set For the removal of common rail injectors without dismounting the cylinder head on Mercedes etc. Slide Hammer : 1.75kg Adaptors : M17 x 1.0. M27 x 1.0. W/M12 x 1.75P

1/2”Dr Injector Sockets : 25 / 27 / 29 / 30mm. 7 Injector Adaptors and Slide Hammer. Suitable for the fast and reliable removal of Bosch, Delphi / Deso and Siemans diesel Injectors.

CT0536

CT3528

7pc Fuel Injector Socket Set 1/2” & 3/4”Dr Sizes : 25, 27, 28, 29, 30mm Suitable for most Injectors with Bosch and Siemans nozzles fitted to Citroen / Peugeot vehicles.

NEILSEN

Distributed by Cannon Tools Limited

Diesel Injector Master Kit 3pc Fuel Injector Extractor Set Slide Hammer - 1.85kg / 470mm. Injector Claw. Injector Adaptor. Suitable for Mercedes CDI engines.

Suitable for the removal of Bosch, Delphi, Denso, Siemens and Pumpe Duse diesel injectors. 1.3kg Slide Hammer with 150mm Shaft. 4kg Slide Hammer with 400mm Shaft and Handle. With various Male and Female Adaptors, Pump Duse Injectors Adaptors and Injector Sockets : 25, 27, 29, 30mm


Fuel Injector Sevice Kits CT4026

CT4071

Section 5

CT2236

BMW / Mercedes Diesel Injection Pump Socket 1/2"Dr - 56mm Long

CT3617

BMW Fuel Injector Service Kit

6pc Mercedes Injector Puller Set For removing common rail injectors without having to disassemble cylinder head. For Mercedes-Benz CDI engines 611, 612, 613 etc. Injection puller with impact hammer.

CT3376

Flow Meter and Adaptor Set Flow Meter and Adaptor Set for Common Rail Diesels For measuring the amount of fuel injectors return to the deposit tank. For use on up to 6 Injectors. Adaptors for Bosch, Delphi, Denso and Siemens injectors.

For Bosch and Common Rail injectors. Blower adaptor to clean the injector seats. M16 - M17 forcing screw, support feet and Hex wrench to remove solenoids. With 29mm 1/2�Dr injector socket.

CT3756 CT3566

Fuel Injection Pressure Test Kit Comprehensive kit of adaptors and fittings for modern Schroder test-port fuel injection systems. With high pressure dual scale gauge reading 0-145psi and 0-1000kpa. Pressure release valve with drain hose for sate fuel recovery.

CDI Diesel Fuel Injection Pump Puller

CT4077

This tool is specifically designed for holding the sprocket and chain in place when disassembling the VP44 and high pressure pumps in BMW common rail diesel engines. This kit has a small puller body to fit transverse engines on Vauxhall / Opel and Land Rover Free Lander and Rover 75 models with TD4 and M47 2.0 engines.

7pc Diesel Fuel Pump Timing Set

CT3583

with Dial Indicator Gauge Injection pump locking pins and impellers. Applicable to Audi , Ford, Seat, Skoda and Volkswagen.

Flow Meter for Common Rail Diesel Engines For measuring the amount of fuel injectors return to the deposit tank. For use on up to 6 Injectors. Adaptors for Bosch, Delphi, Denso and Siemens injectors.

CT3682

CT3892

Diesel Fuel Injector Puller

Diesel Fuel Pump Timing Set

For Citroen / Peugeot 2.0 / 2.2HD1 injectors. With Pulling Bridge and 3 Bridge Legs Injector Sockets : 25mm, 29mm Diameter

For adjustment of fuel injection pumps i.e Bosch, VE, Kikki, Lucas, CAV-Roto, Nippondenso.

CT3506

CT3621

24pc Flow Meter Adaptor Set for use on injector nozzles together with common rail diagnosis kit. Adaptors for Bosch, Delphi, Denso and Siemens injectors.

CT3689

Vacuum & Fuel Pump Tester VAG Petrol Injector Service Kit For petrol injectors on VAG vehicles. Applicable to 1.4, 1.6, 1.8, 2.0, 2.7V6, 3.2V6, 3.6 V6 and 4.2V8 FSI engines.

Delphi False Actuator Kit With 80mm Ă˜ gauge. Test Pressure up to 10 psi. Rubber hose and 14mm / 17mm manifold adapter. Checks for leaks in fuel line, vacuum chokes and heating.

The False Actuator Kit works with Delphi Sealed Rail kits to extend the testing abilities. The false actuators trick the common rail pump into producing the maximum pump pressure which confirms the pump is able to work under maximum load. For Bosch, Delphi, Denso, Siemens injectors

www.cannontools.co.uk


Section 5

Compression / Pressure Tester Kits

CT2235

CT3006

CT1865

14pc Diesel Compression Test Kit

Petrol Compression Test Kit

Supplied with Gauge and Adaptors. Gauge reads 0-1000psi and 0-70bar with 368mm Hose and Release Valve

41pc Fuel Injection Test Set This set includes High Pressure Gauge with Dual Readings of 0-145psi and 0-1000kpa. Low Pressure Gauge with 0-15psi or 0-100kpa. Adaptors Feature Quick Couplings for Easy Connection.

Thread Chasers : M10, M12, M14, M18. For engines with deep seated plug ports with difficult access. Built-in pressure relief valve enables repeat tests without dismantling

CT1866

CT3922

Diesel Compression Test Kit

Oil Pressure Test Kit

For Direct and Indirect Engines. Dual Scale Gauge Glow Plug Adaptors : M10 x 1.0, M10 x 1.25, M12 x 1.25, M14x1.25. Dummy Injectors : M20 x 1.5, M24 x 2.0. Stanadyne Dummy. Replacement Seal, Washer Set, 90° Elbow and Clamp Plate.

Helps to diagnose worn oil pumps and engines faulty oil pressure switches and pressure warning indicators. 1M long flexible hose enables access to difficult to reach oil switch ports. With 10 x oil switch port adaptors and 80mm Ø Gauge 0 - 10 bar / 0 - 140psi.

CT3382

CT3524

CT3620

Engine Compression Test Kit A comprehensive kit for testing the compression on both petrol and diesel vehicles. Features 600psi gauge. Straight and right angled quick connect fittings. Spark Plug Sizes : 10, 12, 14, 18mm. Glow Plug Adaptors. Injector Adaptors : M20, M22, M24 and Ford Stanadyne injectors plus clamp-on injectors. For most modern vehicles.

CT0589 3pc Petrol Compression Test Kit 65mm Diameter Gauge Psi, Bar, kg/cm, kPa. 150mm Quick coupler 320mm flexible adaptor with 14 and 18mm screw in adaptors.

Fuel Pressure Test Kit

Oil Pressure Tester Automatic Wave Box Pressure Meter

Test gauge, Multi-Meter, Leads, Clips, boot and hose M8 x1.0, M12 x 1.25, M12 x 1.5 banjo bolts. 1/4 and 5/16 hose clamps. l/4 x 2” hose. 5/16 x 3” hose. Ford schrader, CM TBI, and 90° angle adapters.

This universal kit is designed to diagnose problems with oil pressure in virtually all diesel and petrol engines. Dual scale gauge - 0 - 500psi / 0 - 35bar. Hose - 71in. / 1800mm 1/8 NPT oil proof. Includes 1/4 and 3/8 NPT Adaptors

CT3615

CT3742

CT2571 Petrol Compression Test Kit

M8 x 1.5, M10 x 1.0, M12 x 1.25, M14 x 1.25. Flexible Extension - 400mm. Straight and Angled Push-on Connectors.

NEILSEN

Distributed by Cannon Tools Limited

Enginne Compression Test Kit 7pc Pressure Loss Testing Kit for checking the compression of single cylinders on Diesel and Petrol engines. Includes Gauge with Adaptors for single and multi-valve engines. M10 x 1.00 / M12 x 1.25 mm M14 x 1.25 / M18 x 1.5 mm / M24 x 2 mm. M12 x 1.25 mm Adaptor with 7 mm hole for VW Diesel engines. Maximum pressure : 6.8 bar or 100 psi. Suitable for most Vehicles and Motorcycles.

Vacuum Carburettor Synchronizer Kit This kit lets you synchronise the values of up to 4 carburettors as well as adjust and set them, with lockable valves enabling user to hold vacuum values in use. 80mm diameter gauges with fixed plate and 4 x 750mm rubber hoses. Supplied with set of long and short carburettor adaptors and connectors for easy access.


Fuel Line & Piston Tools CT1329

CT3687

Section 5

CT2195 Piston Ring Compressor

280mm Carburettor Adjuster with Flexi-Shaft 5 Adapters for multiple applications. 2mm, 2.5mm Hex Bits 4.5 mm and 1/4in. Hex sockets and Double D Socket. For GM 1.7 to 2.2L engines 1978 onwards

2 Leg Fuel Tank Sender Spanner Range - 110 - 170mm Diameter Use with a 24mm Spanner or Socket For removing and re-fitting Tank Sender Mounting Rings.

53 - 175mm diameter.

CT2196 Piston Ring Compressor

CT3688

60 - 175mm diameter.

CT1274 3 Leg Fuel Tank Sender Spanner Range 75-160mm Diameter Use with a 24mm Spanner or Socket For removing and re-fitting Tank Sender Mounting Rings.

8pc Fuel Line Disconnect Kit with rubber rings

CT2319 Piston Ring Pliers 50 - 100mm diameter.

CT3898

CT1950 GM Vauxhall / Opel Fuel Filter Tool Diesel Fuel Filter Removal Kit for GM vehicles

3pc Fuel Line Disconnect Kit Design for uncoupling quick release fittings on fuel lines for most makes and models of cars.

CT3595 Piston Ring Pliers 80 - 120mm diameter.

CT3502 CT3596

CT3910

Piston Ring Pliers 110 - 160mm diameter.

Fuel Line Pliers for Audi, Fiat, GM, Mercedes and VW. For removal and replacement of the connections on the in-line fuel filter. Required when replacing the fuel filter or during engine repairs.

CT3565

CT3366

Universal Fuel Tank Lid Remover 1/2�Dr Adjustable Fuel Tank Lid Remover

11pc Piston Ring Service Tool Set

7pc Piston Ring Compressor Set

Piston ring compressors with ratchet key 50 -100mm | 53 - 125mm | 90 - 175mm Piston ring groove cleaning and Cleaning blades Offset Driver : Phillips and slotted

73 - 111mm Ratchet Piston Ring Compressor Pliers Allows the rings to be compreesed in small increments. 6 Swivel Bands allowing use at various angles. Sizes : 73-79, 79-86, 86-92, 92-98, 98-105, 105-111mm.

www.cannontools.co.uk


Section 5

Cylinder & Piston Tools

CT0120

CT4019

CT0123

7pc Hex Bit Set Sizes : 3, 4, 5, 6, 7, 8,10mm 110mm Long with Ball End Suitable for Automotive Servicing.

15pc Ribe Bit Set 1/2” Drive Adaptor Sizes : M6, M7, M8, M10, M12, M13, M14 10mm Hex shaft x 30mm and 75mm Long Suitable for VAG Cylinder Head Bolts.

CT4005 6pc E-Socket Set

CT0124

1/2''Dr x 140mm Long. Sizes : E10, E12, E14, E16, E18, E20. Used on cylinder head bolts.

M10 Spline Bit 140mm Long - 1/2”Dr S2 Steel Bit

CT2267

For Cylinder Head Bolts on Ford, GM, Mercedes Vans, VAG vehicles.

7pc Spline Bit Set Sizes : M4, M5, M6, M7, M8, M9, M10 110mm Long Suitable for Cylinder Head Removal and Brake Servicing

CT4228

CT3027

6pc Impact Socket Set - 3/4”Dr E-Sockets : E18, E20, E22, E24 12 point Sockets 17 and 19mm Ideal for Cylinder Head Bolts and Servicing on most Trucks

4pc Star Bit Set - 3/8"Dr Sizes : T40, T45, T47, T50 x 100mm Deep Suitable for Cylinder Head Bolts, Brake Calliper Bolts Accessory Fixings and CV Joint Bolts.

CT0357 119pc Impact Socket & Bit Set

CT0125

3/8” & 1/2”Dr Sockets : 8 - 22mm Impact Bits : Hex, Phillips, Slotted, Torx Socket Adapters, Extension bars, Universal joints Impact Driver and Bit Adapter

38pc Hex, Ribe, Star & Spline Bit Set 1/4” and 1/2”Dr Hex Bits : 5 - 24mm Ribe Bits : M7 - M10 Spline Bits : M9 - M16 and M18 Impact Star Bits : T10 - T50 Tamper proof Star Bits : T30 - T70 In Lengths : 37- 295mm Suitable for a wide range of vehicle servicing.

NEILSEN

Distributed by Cannon Tools Limited

16pc Hex, Star Bit and E-Socket Set - 3/4" & 1"Dr For Cylinder Head Bolts, Wheels and Shock Absorbers. Hex Bits : 17, 19, 22, 24mm x 107mm Long Star Bits : T60, T70, T80, T90, T100 x 107mm Long E-Sockets : E18, E20, E22, E24 x 107mm Long 3/4" & 1"Dr Bit Adaptors. 4mm Hex key.

Check out the Website for up-to-date Products and specifications


Cylinder & Piston Tools CT3029

CT0586

Section 5

CT3614

Hydraulic Valve Lifter / Remover Essential tool which enables most hydraulic valve tappets to be removed. With Slide Hammer for stubborn tappets.

250mm Overhead Valve Spring Compressor For most OHV / OHC and CHV engines Not suitable for deep seated valves. Reversible Jaw with automatic cam-action locking.

CT2577

CT3899 250mm Valve Stem Seal Ring Pliers

11pc Valve Seal Remover and Installer Kit

For the removal of deep seated valve stem seals. Suitable for most vehicle makes and models

Valve Stem Seal Pliers. Drive Handle - 6 inch / 150mm Deep Seal Sockets - O.D 10.8 - 14.8mm. Adaptors - 5. 5.5. 6. 6.5. 7. 8mm and 3/8 inch.

Universal Cylinder Head Service Kit Complete cylinder service kit enables in-situ removal and replacement of valve springs / guides and seals. Suitable for 8 , 16 and 24 valve engines.

CT3365

CT3900

CT3599

270mm Valve Stem Seal Ring Pliers For the removal of deep seated valve stem seals. Suitable for most vehicle makes and models

Valve Collet installing and Pick-up Tool Set This tool holds the valve keepers in its magnetic jaws so you can easily manoeuvre the keepers into the valve stem grooves for installation. With 3 valve keeper installing tools and flexible magnetic pick up tool

CT3302

Valve Spring Compressor Kit Complete service tool kit for OHV and OHC petrol or diesel engines on Audi, Nissan, Toyota, Chrysler, Honda, Mazda, Mitsubishi, Porsche, Volvo and VW.

CT3030

CT1112 2pc Valve Lapper Set Suction Caps - 5/8”, 13/16”, 1-1/8”, 1-3/8” Use with lapping compound ( not supplied ) Ideal for hand lapping small and large head unslotted

CT2757

3pc Scraper Set 10 x 270mm / 25 x 220 / 310mm

CT3003 32mm Rigid Offset Scraper Cylinder Hone 50 - 180mm 2” to 7” diameter Flexible shaft for self centering

7pc Valve Spring Compressor Kit 5 Adaptors for various spring diameters : 16, 19, 23, 25, 30mm or 5/8” to 13/16” Ideal for Motorcycles and Small Bore Engines

www.cannontools.co.uk


Section 5

Timing & Fan Clutch Tools CT3028

CT1597

CT4074

Universal Cambelt Tension Gauge for Cambelts of various widths. Dual Direction Rotating Scales with Clear Incremental Markings

32mm Fan Clutch Nut Wrench

Pulley Holding Tool For holding pulleys in place and preventing movement. Suitable for Crankshafts and Camshafts.

BMW Water Pump Removal Tool Kit for removing water pumps on models with temperature dependent viscosity drive fans. Removes lock nuts on thermo-Viscous fans.

CT2075

CT3944

Fan Hub Spanner & Holding Tool

Timing Belt Extension Tool - 1/4”Dr

Viscous Fan Spanner with Fan Hub Holding Tool Set

CT1246 Groove Type Belt Strap Wrench for Pulley Removing

Range 8mm - 25mm With 3mm Chrome-Vanadium Pins

CT2104 CT3665 CT1245 5pc 18” / 460mm Long Damper Pulley Wrench Set

6pc Belt Tensioner Retaining Pins

Sizes : 13, 15, 16, 17, 19mm

For Automatic Belt Tension Systems in vehicle engines

CT1516

CT2938

Timing Belt Setting Tool Kit

for Pulley Removing

CT3600

For restricted access 3/8”Dr x 580mm Long with 1/2”Dr extension Useful on spring loaded idler pulleys 3/8”Dr Sockets : 13, 15, 16, 18mm

Belt Tool Kit For the quick and easy removal and installation of Elastic Ribbed Belts. Suitable for most vehicle makes and models.

CT3449

CT1515

Tooth Type Belt Strap Wrench

Belt Installation Tool

Fan Clutch Tool Set 9pc Tension Wrench Set

600mm Reach For Restricted Access to V style Timing Belts .

Sizes : 12, 13, 14, 15, 16, 17, 18, 19mm

Removes thermo viscous fan lock nuts on Mercedes, BMW and many Ford models. Allows the water pump pulley to be held in place while loosening the radiator fan for removal. Clutch Wrenches - 32, 36, 40, 65mm Fan Clutch Holding Wrench - 38mm, 44.5mm

CT3907

CT4018

CT3185

15pc Tension Wrench Set Puller for Ribbed Drive Pulley Length : 200mm. Height : 80mm. Low Profile with Hex Key. Suitable for most vehicles.

NEILSEN

Distributed by Cannon Tools Limited

With Interchangeable Heads for tensioners on auxiliary and timing pulleys. Includes bar with locking system. Star ( Torx ® ) : E10, E12, E14, E16, E18 Sizes : 12, 13, 14, 15, 16, 17, 18, 19mm

10pc Fan Clutch Wrench Set With Fan Pulley Holding Tools Fan Clutch / Nut / Hub Wrenches Range from 37mm to 83mm • 1-7/16” to 3-1/4”


Timing - Camshaft & Crankshaft Tools CT3917

CT3018

Universal Camshaft and Crankshaft Pulley Holder

Timing Gear Puller

Holds camshaft or diesel pump sprockets and gears for removal and tightening of retaining bolts. Pins : 3.5, 4, 4.5, 5, 6, 7 and 10mm. Wrench swivels to adjust from 32 - 127mm 1/2�Dr for use with ratchets or power bars.

Section 5

CT3150

Removes Timing Gears and other gears with tapered holes.

CT3775

CT1953

Crank Seal Installation Kit Universal Crank Seal Remover / Installer Kit covering a wide range of cars with oil seals between 27mm and 58mm diameter. Aluminium Seals to prevent damage.

CT3149 BMW Flywheel Tool Set

Universal Twin Cam Locking Tool Petrol and Diesel Engines. Designed to lock twin camshafts to timing marks during timing belt replacement. Fits on to sprockets and extends to lock into sprocket teeth. Adjustable arms to fit various diameters and teeth pitch. Locking between cam and diesel injection pump sprockets

For Diesel and Petrol chain drive engines. Found on most BMW K, M, N models The tool can also be used to hold the flywheel when removing the timing chain for cylinder head work

CT1922 Camshaft and Crankshaft Seal Kit Includes 2 Seal removers for multiple applications. Angled blades for removing seals in limited access

CT3896

CT3690

5pc Master Cam Clamp Kit This universal kit reduces repair time and covers most Single / Twin and Quad cam engines. Locks camshafts during belt replacement. Prevents engine damage due to incorrect timing. Allows easy operation in small engine bays.

CT3021

46p Harmonic Balance Puller Set Removes Harmonic Balancers, Gear Pulleys, Steering Wheels and Crank Shaft Pulleys. Zinc Plated Yoke and Bolts. 5 inch Pressure Screw. Small Cantering Adaptor Large Cantering Adaptor. Flat Shaft Adaptor

Camshaft and Crankshaft Seal Kit Citroen / Peugeot Petrol Engine Camshaft and Crankshaft Seal Installer Kit. Citroen / Peugeot Petrol 1900-2000.

CT3919 CT3921

Harmonic Balance Puller Set

Universal Harmonic Balance Puller Set

Removes harmonic balances, gear pulleys, steering wheels and crank shaft pulleys. For 2 or 3 hole application. 6� pressure screw with small centring adaptor. Bolts - 5/16 x 18, 3/8 x 16, 3/8 x 24, 8mm x 1.25, 10mm x 1.5

Installation and Removal Tool Kit with Puller Plate and 4 sets of 3 screws. Centre bolt 10mm and 9 adaptors. For use on the crank pulley damper, crankshaft damper, torsion damper or vibration damper for drive belts.

10pc Motorcycle Flywheel Puller Set Comprehensive set of flywheel pullers used to separate flywheel from the crankshaft taper. Suitable for most makes of motorcycle. Right & Left hand threads

www.cannontools.co.uk


Section 5

Timing Tool Kits

CT3520

CT3879

Diesel Timing Tool Set Camshaft / Crankshaft Locking and Setting Kit for chain drive 1.3 diesel engines. Applicable to Alfa Romeo, Fiat, Ford, Lancia, Opel, Suzuki, Vauxhall. Set includes a tension locking pin.

CT3009

Diesel Timing Tool Set A comprehensive kit designed for setting camshaft and crankshaft timing position on 1.8, 2.0 and 2.5 chain drive diesel engines. With Timing Chain Compressor and Locking pins Injection Pump Lever and Sprocket Puller Crankshaft Holding Tool

CT3557

CT3589

BMW Engine Locking Kit For use on N43 Chain Driven Engines. 1 Series E81 . E82 . E87 . E88 ( 06 -12 ). 3 Series E90 . E91 . E92 . E93 ( 06 -12 ) 5 Series E60 . E61 ( 07-10 ) Includes VANOS sensor alignment tool.

CT3190

BMW Diesel Timing Tool Set 16pc Timing Locking Tool Kit

Diesel Timing Setting and Locking Set

Camshaft and Crankshaft Locking Tool Set for Diesel and Petrol Engines. Suitable for carrying out timing belt changes. Audi, Citroen, Fiat, Ford, Izuzu, Peugeot, Rover, Saab, Seat, Skoda, Vauxhall, VW.

Diesel Engine Setting Locking Kit for Chrysler, Jeep and Mecedes Benz. Suitable for timing Chrysler 2.2D and 2.7D CRD diesel engines and a huge range of Mercedes Benz diesel chain drive engines. Kit includes flywheel locking plates with M6 x 90mm bolts and camshaft locking pin set.

CT2911

For chain drive engines. Includes TDC position tool. N47/N47s 1 Series : 118 / 20 / 23D - E81 / E87. 3 Series : 318 / 20D - E90 / E92 . 5 Series : 520D - E60 / E61. X3 : 2.0D - E83.

CT3580

CT3426

19pc Timing Locking Tool Kit For Locking and Setting Timing when replacing timing belts. Suitable for Isuzu, Mazda, Honda, Ford, Opel, Landrover, Citroen, Peugeot, Vauxhall, VW.

BMW Camshaft Alignment Tool Kit For servicing BMW M47 2.0 16 valve engines. Applicable to E38, E46, E39, 318D, 320D, 330D, 520D, 525D, 530D, 730D. With Crankshaft pin / Camshaft setting plate / Clamp for camshaft locking tool and 2 timing pins.

CT3773

BMW Timing Tool Set Engine codes - N42, N46, B18-A, B20-A-B For dismantling and assembling camshafts. BMW series : 1 . 3 . 5 . X3 . Z4. Type - E87, 46, 60, 85, 83, 90, 91.

CT3588

CT3522

BMW Timing Tool Set BMW Camshaft Alignment Tool Kit

Diesel Timing Tool Set Diesel Engine Timing Locking and Setting Set for timing belt replacement on a wide range of Renault, Nissan, Vauxhall and Opel vehicles.

NEILSEN

Distributed by Cannon Tools Limited

To enable the correct timing when servicing engines on both cylinder head camshafts. With gauges for locking camshaft in TDC position when checking or adjusting camshaft timing on BMW N62, N62TU, N73 - E53, E60, E61, E63.

N51, N52, N53, N54 - For Camshaft Timing Belt change and adjustment of valve timing. With Camshaft and Crankshaft Locking Tools and Transmitter Wheel Locking Tool for following models : BMW series : 1 . 3 . 5 . 7 . X3 . X5. Z4. Type - E60, E61, E63, E64, E65, E66, E70, E81, E82, E83, E85, E86, E87, 90, E91, E92, E93.


Timing Tool Kits CT0537

BMW Timing Tool Set For BMW N20 and N26 Engines 4 cylinder turbo engines, with Camshaft Locking Tool and Fixating Base Alignment Pin and Chain Tensioner.

CT3523

CT3147

BMW Timing Tool Set

Section 5

CT3878

Special VANOS exhaust camshaft sprocket wrench. Primary timing chain pre-load tool for tensioning the timing chain on M50 engines. M22 threaded for M42 / M60 engines M26 threaded for M50 / M52 engines

BMW Timing Tool Set

CT3579

CT3770

BMW Timing Tool Set

BMW Timing Tool Set

For setting and locking camshafts. Plus tools for setting up timing chain tension. Applicable to M40, M42, M50, M60, M62, M70 engines.

BMW Timing Tool Set BMW petrol engines with the Valvetronic system. Includes tools to align the Twin VANOS unit. Suitable for BMW N42 / N46 N46T 1.8 and 2.0 Chain Drive engines.

CT3556

BMW Timing Setting Kit

For DOHC engines M40, M44, M50, M52, M54, M56. For dismantling and assembling camshaft for Valve timing and cambelt change. For models - 3, 5, 7, X3, X5, Z3, Z4. E30, 31, 32, 34, 36, 38, 42, 46, 53 , 60, 61, 65, 66, 83, 85.

For M54, M60, M62 For VANOS components and adjusting cam timing. with 2 camshaft alignment jigs, Top dead centre pin, Rigid chain tensioner to tension primary chain. 2 jigs to lock the sensor wheels in place during timing. Special deep thin wall 32mm socket.

CT3427 CT2939

1.6 BMW N40 / N45 / N45T petrol engines and for aligning the VANOS units on the inlet and exhaust camshafts. Alignment Plate. Inlet / Exhaust Setting Plates Timing Chain Tensioner Pre-load tool. Flywheel Locking Pin. Camshaft Setting Plate Securing Screw.

CT4066

BMW Timing Tool Set

BMW Timing Tool Set For the Removal and Installation of camshaft chain and adjusting timing on BMW Diesel Engines M41, M51, M47TU, M47TU T2. M57TU T2 3.01 1998 - 2008.

CT3586

Single VANOS Camshaft Timing Kit With Camshaft Locking Plate, VANOS Turning Wrench and Top Dead Centre Pin.

BMW Mini Timing Tool Set Camshaft Sprocket Holding Tool, Engine Support Bracket and Tension Assembly Tool. For petrol engines on Mini One Cooper and Cooper S models - 2001-06

CT3581

CT3882 BMW Timing Tool Set BMW Timing Tool Set For VANOS timing on N63 and N74 engines. Camshaft Alignment Fixtures - Camshaft Alignment Jigs, Crankshaft TDC Pin and VANOS Timing Tools.

For VANOS units on M52TU, M54 and M56 6-cylinder engines. Alignment Jig Adjusting plate for setting valve timing. Jig for pre-assembling secondary chain sprockets. Lock Pin secures chain tensioner during timing. VANOS Compressed Air Connector .

BMW Mini Timing Tool Set Citroen / Peugeot Chain Tensioner Camshaft and Crankshaft Locking Tool Mini models - One, Cooper, Series RS5 and S6 with motor code N12.

www.cannontools.co.uk


Section 5

Timing Tool Kits

CT4170

CT4086

CT3379

Citroen Peugeot Timing Tool Set Petrol 1.1 - 2.2 16V turbo and twin camshaft

BMW Timing Tool Set For the variable camshaft unit on BMW 6 cylinder engines on N51, N52, N53, N54, N55 engines. With T.D.C pin, Camshaft Alignment Jig, Tensioner Adjuster and Setting Gauge.

CT3677

Fiat Timing Tool Set

Diesel 1.4 - 2.2 HDI 1.4 - 2.5 D / TD / TDI

To determine the specified piston position and prevent the camshafts from timing or hold them in position when changing the timing belt or during other engine repairs. Applicable for Fiat 1.2 16V TwinCam petrol engines : 176 B9.000 182. B2.000 and 188 A5.000 e.g. Fiat Punto, Brava and Bravo

CT3563

CT3395

Chrysler Diesel Timing Tool Set for Chrysler Belt Drive Engines Contains - Camshaft, Crankshaft and Balance Shaft Pins Applicable to : Voyager, Grand Voyager, Jeep Cherokee.

Petrol Engine Setting / Locking Kit Fiat / Opel / Vauxhall. Camshaft and Tensioner Locking Tool for 2.2 Chain Drive Petrol Engines.

CT2908

CT4069 Citroen Peugeot Timing Tool Set

Fiat Timing Tool Set Crankshaft locking tool, camshaft setting plate and belt tension adjuster for the 1.2 engine and additional sprocket locking tool and alignment fixture for the 1.4 VVT engine. Models - Fiat 500 07-08. Fiat Idea 04-08 Fiat Linen 07-08. Fiat Grande Punto 07-08. Fiat Doblo 05-08. Fiat Panda EV02 05-08. Engines : 1.2 8V / 169A4.000 / 199A4.000 / 1.2 8V / 188A4.000 ( EV02 ) 1.416V/350A1.000.

Comprehensive sett for Petrol and Diesel Engines

Fiat Timing Tool Set

CT3891

CT3559

With Camshaft and Crankshaft timing pins. Fiat 2.3 / 3.0 JTD engine codes : F1AE0481/A/C/D/N

CT3186

Citroen Peugeot Timing Tool Set Petrol Engine Timing Kit Essential tools for timing belt replacement on 1.8 and 2.0 petrol EW code engines.

CT3581

Fiat Timing Tool Set Alfa / Fiat / Lancia Fiat Timing Tool Set

Citroen Peugeot Timing Tool Set Citroen Picasso C4 Peugeot 207 1.4VTI Valvetronic.

NEILSEN

Distributed by Cannon Tools Limited

Petrol Engines Fiat Brava . Bravo . Barchetta . Cargo . Coupe . Marea . Palio . Weekend . Punto . Multila . Stilo . Idea . Doblo Twin Cam Engines - 1.2, 1.4, 1.6, 1.8, 16V Diesel Engines - Fiat Brava . Bravo . Marea . Weekend . Palio . Punto . Mulitpla . Doblo . Ulysse . Ducato . Stili JTD Diesel Engines - 1.9D / TD, 1.9JTD, 2.4TD / JTD.

Contains important tools for Flywheel, crankshaft, camshaft, fuel injection pump shaft, belt pulley and tensioning of the timing belt. Complete classification chart included. Alla, Barchetta, Bravo, Brava, Coupe, Delta, Dedra, Punto, Spider GT 1.2 /16V, 1.4/12V, 1.6/16V, 1.6 eco. 1.8 and 2.0/16V, 2.0/20V, 2.4/20V, 3.0/V6.


Timing Tool Kits CT3562

Fiat Timing Tool Set Alfa / Fiat / Lancia Petrol Engine Setting and Locking Master Set featuring inlet / exhaust camshaft locking blocks enabling the camshaft to be held in place in the timed position while replacing the timing belt. Supplied with a TDC position tool and variation socket.

CT3148

CT4058

CT3890

Diesel Timing Tool Set

Ford / Mazda Timing Tool Set

for 1.3 lite engines found on Fiat, Ford, Suzuki, GM models.

CT3918

For adjustment of flywheel, crankshaft, camshaft, fuel injection pump, belt pulley, timing belt tensioning.

CT4064

Ford Camshaft Sprocket Puller Size 90 x 65mm F8M, F8Q, S8U, S9U. Also suitable for removing the Impeller.

CT4065 Fiat / Opel Timing Tool Set This comprehensive set enables the correct timing to be set when changing timing belts

CT3888

Ford Diesel Timing Kit Ford 1.8TDDi / TDCi timing belt replacement on chain drive vehicles. With high pressure pump sprocket removal and timing chain cover alignment tools.

Fiat / PSA Timing Tool Set

CT3678

Ford / Mazdz Timing Tool Set Petrol Engine Setting / Locking Kit Covers the complete range of Ford Duratec engines 1.25 to 2.3 16V both belt and chain drive.

CT3735

CT3429

Fiat - 2.2, 2.3, 3.0 JTD and PSA engines - Puma 22DT, F30DT Citrรถen Jumper, Fiat Ducato, Ford Transit, Iveco Daily, Peugeot Boxer

Section 5

Ford / Mazda Timing Tool Set

Ford Duratorq Diesel Injector Alignment Tool Alignment Bar and Adjustable Clamp to hold the injectors in place and align them with the fuel lines while the injectors are secure. For Ford Duratorq diesel engines. 2.0 / 2.2 / 2.4litre DI / TDCI / TDDI

CT1377

41mm

CT1380

46mm

GM Water Pump Wrenches for belt tensioning

Includes camshaft and flywheel locking tools various timing pins plus a camshaft sprocket removal tool.

CT3374 CT3564

Fiat Timing Tool Set - Alfa Romeo Petrol Engine Setting / Locking Kit for Alfa Romeo Twin Spark / Twin Cam / Belt Drive. Kit includes camshaft setting plates for locking the camshafts in the timed position. The plates are positioned in place of the camshaft bearing caps. The kit also includes timing and balance shaft belt tension adjuster tool. TDC positioning tools are also required to time these engines - not supplied in kit.

Ford Timing Tool Set Mondeo and Transit 2.0 / 2.4 TDI TDCI from 01 to 04 Engines - 2.0 and 2.4 duratorq 16 Valve. For Locking the camshaft, injection pump shaft and crankshaft in position when changing a timing belt.

GM Water Pump Sprocket Retainer Vauxhall / Opel 2.2 Chain Drive Coolant Pump Sprocket Retainer - GM. Used to keep the engine in the timed position during removal / installation of the coolant pump. Allows the pump to be replaced without the timing chain being disturbed.

www.cannontools.co.uk


Section 5

Timing Tool Kits

CT3378

CT3889

CT4059

GM Timing Tool Set

GM Timing Tool Set Timing and Locking Tool Kit for Vauxhall / Opel Diesel 1.9CDTI. For use on Camshafts and Crankshafts when Servicing and adjusting Timing belts.

CT3519

GM Timing Tool Set Opel / SAAB / Vauxhal Petrol Engine Setting and Locking Kit for locking engine and checking timing marks on V6 Belt Drive EcoTec multi-valve engines. Maintains crankshaft gear and camshaft sprockets at TDC position for cam-belt work. Features a belt guide roller adjuster.

CT3428 GM Timing Tool Set

for Opel / Vauxhall and Chevrolet 2.0 litre common rail Diesel engines. Crankshaft and Camshaft positioning and locking tools for setting the engine timing when changing the timing belt

CT3521

JLS Timing Tool Set Jaguar / Land Rover Diesel Engine Timing Locking and Setting Kit for 2.7 diesel belt drive engines. Contains camshaft alignment / timing pins and flywheel locking tools. Applicable to Jaguar S-Type TDVi 04 - 09 . Land Rover Discovery / Range Rover Sport TDV6 04 - 09

for 2.0 D and 2.2 D EcoTec chain drive diesel engines in Vauxhall, Opel and Saab vehicles. Kit includes camshaft, injection pump timing adjustment fixture. Applicable to Vauxhall / Opel Astra-G 98 - 06 . Frontera-B 98 - 04 . Omega-B 98 - 03 . Signum 03 - 05 . Sintra 98 - 99 . Vectra-B 97 - 02 . Vectra-C 02 - 05 . Zaf ira-A 99 - 05. Saab 9-3 98 - 04 . 9-5 02 - 06

CT1954

CT3766

GM Timing Tool Set GM Timing Tool Set Opel / Vauxhall vehicles with 16V 1.6 and 1.8 engines. Applicable to Astra-G, Corsa-D, Insignia, Mervia, Signum Vectra-C, Zafira-B 2003-2011 Also fits Chevrolet Cruze, Orlando 1.4, 1.6, 1.8 and Fiat Croma, Alfa Romeo 159 with 939A4.000 engines

Opel / Vauxhall Diesel Timing Tool Set for locking the camshaft and crankshaft. Also for removal and the installation of Injection and Water Pumps when changing Timing Belts. Applicable to 1.3 CDTi 16V . 1.9 CDTi . 2.0 DTi . 2.2 DTi Diesel Egines

CT3618

CT3525

JLS Timing Tool Set New EDC Manual Transmission Timing Pin. 200 TDI. 300 TDI. 2.5 Diesel. Engines. Crankshaft Damper Puller. Injection Pump Gear Locking Tool. Injection Pump Timing Pin 200 / 300 TDI. Flywheel Timing Tool 200 / 300 TDI. DPS Pump Timing Tool 2.5. Flywheel Timing Tool 2.5. EDC Timing Pin-30Q manual gearbox. Combined Crankshaft Damper Puller and Fuel Pump Gear Locking Tool.

CT4076

GM Renault Timing Tool Set

GM Timing Tool Set Timing Tool Kit for 3 Cylinder Engines. 3 Cylinder Timing Kit for engine codes - X10XE / X12XE. For timing chain and valve train with Camshaft and Crankshaft tools. Suitable for Agila / Corsa 1.0 12V and 1.2 16V

NEILSEN

Distributed by Cannon Tools Limited

Engine Timing Tool Set - GM / Nissan / Renault For adjusting engine timing on the following models Nissan - Qashqai, X-trail Renault - Laguna, Mengane, Scenic, Traffic Vauxhall / Opel - Vivaro

Mercedes Engine Timing Tool Designed to align the camshaft timing angle for correct position on M276, M157, M278 models.


Section 5

Timing Tools & Kits CT4062

CT4024

CT0600

Cam Belt Tension Tool T50 1/2"Dr

Mercedes Timing Chain Riveting Tool

This tool allows access to the tensioner adjuster on K4M and some K4J 1.4/1.6 petrol engines. Renault Megane and Scenic II models - OEM MOT 1368

For renewing and riveting timing chains.

CT3153 CT3772

VAG Camshaft Adjuster Sockets For the camshaft adjustment of 4/3-way central valve. Fitted to : Audi A3 | A4 | A5 | Q5 1.8 and VW 2.0 litre engines with chain drive

CT3659

VAG Crankshaft Turning Adaptor Mercedes M271 Timing Tool Set Camshaft Alignment Tool Set for engine timing and belt changing. Also other camshaft related servicing.

Renault Timing Tool Set Attrezzo Messa in Fase Tool for Camshaft Regulation Renault Espace 2.2. Dci-master 2.2/2.5 dci

CT3161

CT3152 CT3774 VAG Crank Locking Pin CT3591

Mercedes / AMG Timing Tool Set Basic position of camshaft for a 40 degree crank angle after top dead centre. Suitable for most Mercedes-Benz AMG vehicles.

CT3518

Renault Timing Tool Set Clio. Espace. Kangoo. Laguna. Megane. Rapid. Safrane. Scenic. Trafic. Twingo.

CT3430

VAG Pulley Timing Wrench For moving the automatic tension pulley when changing the gear belt. Audi 100 / 1991 . A4 . A6 2.5TDi 5 cylinder. VW Polo Diesel . Lupo 1999 - LT and T4 2.5TDi

CT3886

Renault Timing Tool Set For 1.4, 1.6, 1.8, 2.0 16V Belt Drive engines. Updated kit suitable for timing belt replacement on Renault and some Nissan and Vauxhall / Opel vehicles. Applicable to Renault Clio II 99 - 04 / Clio Ill / Sport 06 12 . Espace / Grand Espace 98 - 02 . Espace / Grand Espace IV 02 - 10 . Laguna 98 - 01 . Laguna II 01 - 07 . Laguna III 07 - 12 . Megane 99 - 03 . Megane II 02 - 10 . Megane Ill / Sport 08 - 12 . Megane / Scenic 99 - 00 . Scenic / RX4 99 03 . Scenic / Grand Scenic II 03 - 09 .Trafic II 01 - 11 Nissan Kurbistar X76 03 - 09. Primastar X83 02 - 11 Vauxhall / Opel Vivaro 01 - 11

Renault Timing Tool Set Clio / Laguna / Megane K4J / K4M and F4P / FAR engines. The camshaft pulley setting tool holds two pulleys in place whilst changing the cam belt. Bolted to the centre of the cams using the existing bolts. Crankshaft locking pin. 5mmTDC timing pin. Camshaft setting tool. Camshaft pulley alignment tool.

VAG Camshaft Locking Tool Applicable to VW, AUDI 1.4 / 1.6L engines in Audi A2 and VW Lupo, Polo, Golf IV, Bora

www.cannontools.co.uk


Section 5

Timing Tools & Kits

CT3885

CT3363

VAG Camshaft Holding and Alignment Set

VAG Belt Tension Adjuster Multi-position timing belt tensioner wrench for VAG Volkswagen, Audi, Skoda, Seat vehicles. 5 variable positions for extra easy use. Suitable for both petrol and diesel engines.

CT3883

CT3364

VAG Camshaft Drive Belt Pulley

CT3425

CT3887

VW Engine Timing Tools for VW 1.2L engines 8155-1 Also replacement parts for CT3146 Timing Set.

CT0031 VAG Engine Timing Tools

VAG Timing Tool Set Camshaft Alignment Set specially designed to set the Camshaft in the correct position for servicing. Audi - A4 / A6 / A8 / A11 97-04. VW Passat 98-04.

CT3146

Camshaft and Crankshaft Locking Tools. Audi / VW V6 2.5TDi and Audi V8 3.3TDi Engines. Suitable for Diesel and Petrol Engines.

CT3594

VAG Crankshaft Seal Flange Remover and Installer

VAG Diesel Timing Tool Set Diesel Enging Timing Setting and Locking Kit for Engines with Hydraulic Belt Tensioners VW - 1.2D, 1.4D, 1.9D, 2.0TDi Pumpe Duse.

for 1.4 and 1.6 - 16 Valve VAG engines fitted to Audi / Skoda / Fiat and VW vehicles Specific tool vital to ensure the correct alignment of the main seal house crankshaft sensor. The Seal housing carries the crankshaft sensor mounting.

CT4084

VAG Timing Tool Set For Petrol and Diesel Engines. Petrol : Audi, SEAT, Skoda, VW. 1.3 6V, 1.2 12V, 1.4, 1.6, 1.8, 1.8T, 2.0 16V. Diesel : Audi, SEAT, Skoda, VW. 1.2,1.4, 1.9, 2.0 TDIPO, 1.7, 1.9D, TD, SDI, TDI, 2.5 6V TDI

CT3884

VAG Diesel Crankshaft Seal Flange Remover and Installer

VAG Engine Timing Tools Diesel Enging Timing Crankshaft Locking Kit Suitable for most vehicles in the VW Group

NEILSEN

Distributed by Cannon Tools Limited

Designed to renew the crankshaft oil seal on Audi / VW vehicles. Applicable to 16V / 20V - 1.9 / 2.0 Diesel Engines since 2006. For 4 Valve Diesel engines with integrated sender wheel. Audi A3 4-cyl. VW Golf / Touran


Timing Tool Kits CT3362

CT3590

Section 5

CT3587

VAG Timing Tool Set VAG Timing Tool Set For 2.0 FSI petrol engines since 2003. With Camshaft Tool, Chain Tension Retainer / Locking Pins and Tension Bolt. Applicable - Audi A3 2.0 FSI and FSI SOHC VW Golf 2.0 FSI and 2.0 FSI SOHC . Touran 2.0 FSI SOHC

For checking and adjusting the engine timing on Audi V6 . V8 and VI0 engines with chain driven cams. Camshaft Locking Tool and Pin. Chain tensioning locking pin.

CT3585

CT3558

VAG Diesel Timing Tool Set VAG Timing Tool Set Camshaft Locking Tool. Setting Gauge Holder For VAG 1.4 TFSi and 1.6 FSi engines : AXU, BAG, BKG, BLF, BIN, BLP. To check and adjust camshaft timing required when replacing timing chains.

CT0521

CT3765 VAG Diesel Timing Tool Set

VAG Timing Tool Set Applicable V6 2.0, 2.8, 3.0T FSI Engines For alignment and adjustment of camshafts and the replacement of timing chains etc... Applicable to Audi Q5 2.0, A6L 2.8, 3.0T

For VAG 2.5 / 4.9D Tdi Touareg and Phaeton. Camshaft locking tool for both 5 and 10 cylinder engines. Clamping device for removal and replacement of the camshaft wheels. Socket for rotating the crankshaft and Locking Wrench for 5 cylinder engines with Tensioner wrench. Suitable for use on Volkswagen Touareg and Transporter 2.5 TDi models with engine codes BAC, BLK, BPD, AXD, AXE, BLJ, BNZ, BPC 2003 onwards. Also 4.9TDi models with engine code AYH 2003 onwards. These vehicle engines are gear driven but the injection timing is controlled via the camshaft followers.

For Timing Belt replacement on 2.7 / 3.0 V6 TDi PD Common Rail Diesel Engines. Crankshaft Locking Tool. Camshaft Locking Tool. Camshaft Wheel Puller. Suitable for Audi A4 . A5 . A6 . AS . 05 . 07 VW Touareg . Phaeton with engine codes - AJB . BKN . BKS . BfflK . B/WZ . BNG . BPP . BSG . BUG . BUN . CAWA . CAMB . CANA . CANB . CANC . CAND . CAPA . CARA . CARS . CASA . CASE . CASC . CAM . CC/HA . CCWA . CCWB . CDYA . CDVB . CDVC . CEXA . CGKA . CGKB

With tools for checking and adjusting engine timing after timing belt replacement with Crankshaft locking tool Camshaft locking tool and Camshaft wheel puller. Balance shaft fixing tool. Applicable to : Audi A1, A3 (8P) A4 (B8) A5, A6 (C6, C7), TT (8J), Q3, Q5.

CT3584

VAG Timing Tool Set

VAG Diesel Timing Tool Set

Diesel Engine Setting and Locking Kit for Belt Drive 2.4 / 2.5D SDI / TDI / TDICR engines. Crankshaft Pulley Holding Tool. Camshaft Setting Plate. Injection Pump Locking Pin. Crankshaft Locking Pin. Tensioner Adjuster. VW Crofter / IT and Transporter.

CT3764

CT4075

VAG Petrol Timing Tool Set

VAG FSI Timing Tool Set

camshaft and crankshaft timing position. 1.8 and 2.0 R4 16V four cylinder engines. 2006-2013 VAG series TSI and TFSI.

Special set of tools for alignment / camshaft locking and adjusting. Applicable to VAG A4 / A6 / A8 3.2 FSI engine. Audi A6 Quattro 2.4 Petrol engine - BDW.

www.cannontools.co.uk


Section 5

Timing Tool Kits

CT2102

CT3767

VAG Timing Tool Set For 1.2 Litre 3 Cylinder Engines from 2002 Onwards. For Volkswagen : Eos, Fox, Lupo, Polo Seat Ibiza / Cordoba. Skoda Fabia Engine Codes : AWY, BMD, AZQ, BME.

CT0527

CT3260

Porsche V8 Timing Tool Set Camshaft Alignment Kit for Cayenne and Panamera V8 engines with Direct Fuel Injection. Also setting camshaft timing on the Cayenne with M97/01 V8 engines. With Pneumatic chain tensioner.

CT3768

Volvo Camshaft Alignment Tool For alignment of cam and crankshafts. Enables correct installation of camshafts with the cam cover. 4, 5, 6 Cylinder Volvo Models - 700, 800, 850, 900, 960, C70, S40, S60, S70, S80, S90, V70-2000, V70XC, XC0, V90, XC90.

CT3880

VAG TFSI Engine Timing Tool Set For Volkswagen 1.2 TFSI engines Camshaft Setting Tool and Crankshaft Locking Pin With timing cover alignment pins used when loosening and tightening the crank.

Porsche 911 Timing Tool Set

CT3568

Cayenne Camshaft Alignment Tool Kit Comprehensive tool kit for engine timing when performing valve-train service on the following Porsche models : Porsche 911 up to 2001 and Boxster up to 2002 With - TDC Alignment Pin. Camshaft Lock and Camshaft Supports. Camshaft Holding Tools. Connecting Rod Centring Mandrel. Piston Pin Driver and Extensions.

VAG Timing Tool Set VAG Timing Belt Tensioner Adjuster Set. Set contains three specialised wrenches and pins required to access the timing belt tensioners fitted to a wide range of VAG petrol and diesel engines.

CT2576

Volvo Timing Tool Set for Volvo and Land Rover Vehicles. Camshaft and Crankshaft locking tools for checking and adjusting the engine timing on Volvo S80 | XC90 | XC60 | XC70 3.0T and 3.2 with T6 engine as of 2007 also Land Rover Freelander 3.2 / 16 - 2006 on.

CT3676

CT3394

26pc VAG Tool Set

VAG Water Pump Removal Kit For Volkswagen Transporter and Touareg water pump. This kit is essential for the removal of the water pump and the alignment of the engine at top dead centre. For VW T5 Touareg 2.5L 5-cylinder TDI engines. Engine Codes AXD, AXE, BAC, BLJ, BLK, BNZ, BPC, BPD.

NEILSEN

Distributed by Cannon Tools Limited

Special Service Tool Set for Santana Jiedi Hex Bits - 4 x 25mm. 5 x 150mm. 6 x 185mm Hex Bit - 17mm 1/2”Dr Ribe Bits - M14 x 150mm Spline Bits - M2. M2.5. M5. M6. M8. M10. M12. Tamper Proof Spline Bit - M16 1/2”Dr. Star Bits - T30, T40, T45, T50, T55. Plug Sockets - 16 and 21mm. 3/8” and 1/2”Dr Adaptors. 3/8”Dr Sliding T-Bar. Damper Pulley Holding Wrench - 13mm.

13pc Diesel and Petrol Engine Timing Tool Set For setting and locking to regain top dead centre and use setting tools to re-check correct alignment. Applicable to Audi, Citroen, Peugeot, Volkswagen and Volvo petrol and diesel engine vehicles.


Section 5

Clutch & Gear Box Service Tools CT3578

CT2761

CT0500

VAG DSG Clutch Installation Kit

17pc Clutch Alignment Tool For fast accurate alignment of flywheel pilot hole and clutch drive plate when re-assembling. Suitable for use on most cars and light commercial vehicles. ApplicationsAudi, Citroen, Fiat, Ford, Honda, Mazda, Mitsubishi, Nissan, Ope, Peugeot, Renault, Rover, Saab, Vauxhall, VW, Volvo.

SAC Self Adjusting Clutch Tool Set Special set of tools for working with SAC clutches 120° 3 screw. Allows Pressure Plate to be pre-tensioned before removal and re-fitting of clutch. Avoids clutch plate distortion and accidental damage due to incorrect fitting and subsequent vibration and shortening of clutch life.

Audi / VW 7 Speed DSG Clutch Installer / Remover For the installation and Removal of the Clutch or Gearbox Applicable to Audi / VW 7 speed vehicles similar to conventional single disc clutches the dry double clutch is also located in the gearbox housing

CT3802

CT3598

Clutch Alignment Tool

CT2936 Audi Clutch Alignment Tool Workbench alignment and installation kit. For vehicles equipped with late model front wheel drive without pilot bearing in the flywheel with 3 different size expanding collets. 133mm clutch alignment tool. Small cone - 15mm. Medium cone - 19mm. Large cone - 24mm

to hold the clutch centre plate centred on the flywheel while fitting the clutch cover plate. Applicable to the Ford Duratorq Diesel Engine used in the following vehicles : Ford Mondeo, Transit. Jaguar X-Type. LDV London Taxi TX1, TX2. Citroen Jumper. Peugeot Boxer. Fiat Ducato. Land Rover Defender.

CT2579

CT3254

SAC Self Adjusting Clutch Tool Set

10pc Clutch Alignment Tool Kit

Complete kit for assembling and disassembly of self adjusting clutches ( 3 and 4 Hole Pitch ). Necessary for pre-tensioning self adjusting clutches before removal or installation. Prevents plate distortion which may prevent the clutch from disengaging or cause dragging.

CT4067

Complete with 8 adaptors Sizes : 11, 12, 15, 17, 19, 20, 21, 25mm. Aligns clutch disc when replacing the assembly

CT4068

Automatic Transmission Clutch Spring Compressor Adjustable tool for removing or installing the snap ring on a transmission rear clutch piston. It applies pressure to the clutch drum retaining washer to compress piston return springs. For use on most American cars and light trucks.

Automatic Transmission Clutch Spring Compressor

4 Leg 64mm to 175 mm Ă˜ For replacing the rear transmission clutch piston snap ring. Adjustable legs fit most cars and trucks.

Pulley Puller and Installer Set Removes pressed-on alternator and power steering pulleys on late model GM, Ford and Chrysler engines. Threaded end installs late-model GM alternator and power steering pulleys. Reverse the jaws to pull the alternator internal bearing. Adapters for GM 3.1 engines. Adapters for Quad 4 engines. Adapters for Ford modular engines.

CT2545

5pc Gear Box Socket Set For Gear Boxes on most Mercedes vehicles. 6mm Tooth x 70mm Long - Differential flange. 6mm Tooth x 70mm Long - Front Wheel Bearing. 8mm Tooth x 70mm Long - Gearbox. 8mm Tooth x 80mm Long - Rear Axle Drive.

www.cannontools.co.uk


Section 5

Cooling System Service Tools

CT1508

CT3622

CT3451

42pc Vacuum Hose Plug and Cap Set Colour coded. 7 sizes covering 3mm - 12.5mm

Radiator Fin Straightener

CT1513 Identifying Clips

CT1921

9 colour coded pairs

CT3911

Refractometer For measuring the freezing point of either Propylene or Ethylene Glycol based antifreeze. Also for checking the strength of battery electrolyte.

AC Water Pump Pulley Wrench - VAG Air Conditioning Water Pump Pulley Locking Wrench for Audi / VW vehicles

CT2578

Air Conditioning System Test Kit AC Manifold Gauge Set designed to test automotive air conditioning systems using R134A refrigerant only by comparing the high and low pressure readings using the vehicle A/C system specifications. This Set can be used to test, evacuate and re-fill automotive air conditioning systems. Colour coded gauges valves and hoses LOW : Blue Gauge - 0-120psi . Blue Hose - 1/4” FFL x 50” HIGH : Red Gauge - 0-500psi. Red Hose - 1/4” FFL x 50” Yellow Hose : 1/2” ACME x 50” Large 70mm gauges with impact-resistant lenses. Gauge Accuracy + / -2 percent. Sight glass for viewing condition of refrigerant. Quick-connect fittings. High pressure safety valve.

CT0575

Antifreeze Coolant Tester Tests Ethylene Glycol based Antifreeze. Test while the engine is hot or cold. Calibrated in degrees C and F.

CT4090

CT3793 Air Conditioning Compressor Clutch Service Kit

Digital Thermometer

Removes and Replaces the AC Compressor Clutch found on most makes and models of vehicles. With 2 and 3 hole Puller Plate.

105mm Stainless Steel Probe Switch between Celsius and Fahrenheit -50°C to +300°C / -58°F to +572°F Temperature Steps : 0.1°C / 0.2°F Power : 1.5V Battery - included

CT3540 CT3924 Vacuum Pump 12pc Air Conditioning Set Valve Cap Removers : SWI 2mm / SW15mm Valve Core Tools : Standard 2.2mm / Large 3.2mm Tamper Proof Bits : T10, T15, T20, T25, T27, T30, T40 Bit 1/4”Dr Adaptor

NEILSEN

Distributed by Cannon Tools Limited

for Air Conditioning System Testing can be used in conjunction with Kits CT3622 and CT3373. Voltage - 230V / 50hz Power - 1/4hp, Speed - 1440rpm, Port - 1/4 SAE Oil capacity - 200ml,Ultimate Vacuum - 10pa / 75ml Dimensions - 249 x 121 x 230mm A compact, low noise pump design prevents oil return.

Infrared Thermometer 8:1 Optical resolution Response Time : 500ms °F or °C selectable scales Weight : 5oz /135g 9V Battery included Precise non-contact measurement


Cooling System Service Tools CT3373

CT3380

Section 5

CT0932

Cooling System Purge Kit Cooling System Vacuum Purge and Refill Kit. Dramatically reduces cooling system refill time without mess and without introducing air-locks. No more time consuming cooling system bleeding and no more messy spills to clean up. Simply plug into the workshop air line attach to the cooling system header tank and create a vacuum. Complete the process by attaching the filler hose and opening the valve allowing your pre-mixed coolant to flow into the system. Supplied with 3 adaptors. 90 psi Air Pressure. 12cfm Air Consumption. 900mm Fluid Hose Length. 1/4� BSP Air Inlet

CT3570

Cooling System Purge Kit Radiator Vacuum Purge and Refill Kit Refill entire cooling system quickly. Radiator Adaptor for use with most vehicles. Coolant Hoses.

CT3923

419pc O-Ring Washer Assortment CT1862 Radiator Pressure Tester Kit Universal set for easy testing of leakage in radiators and coolant systems. Colour coded caps make it easy to choose the suitable test cap for the job. Vacuum purge and refill tool connection fits nearly all type of radiators. Pressure testing pump with hose / quick coupler with pressure release and gauge : Test range 0 - 35 psi / 0 - 2.5 bar. Blue and black radiator cap test adapters to test for original radiator cap leakage. 17 test caps for testing cooling systems on most domestic and import vehicles - vacuum type cooling system purge and refill tool kit for quick change of coolant. Universal Adaptor. Temperature Gauge. Suitable for Mercedes Benz / GM / Jeep / Peugeot / Subaru / Chrysler / Acura / Mitsubishi / Nissan / Mazda / Toyota / Infiniti / Geo / Suzuki / Isuzu / Honda / Lexus / Volvo / Saab / Citroen / Renault / Fiat / Alfa / Mini Cooper / VW / BMW / Ford / Opel / Porsche / Audi / etc.

7 & 8mm Hose Clip Nut Driver with 1/4�Dr and Flexible Shaft.

CT3508

CT1585 6pc Hose Pick & Seal Remover Set

Combustion Leakage Tester

Easily remove seals or 0-rings or pick soft hoses on the vehicle. Tools have different lengths and angle to fit a wide range of applications. Angled blade is ideal for removing seals in a confined space.

Block Tester Kit - Detects exhaust gasses in the radiator and so checks for gasket damage also cracked or warped cylinders. Works with Petrol and Diesel vehicles. Use in combination with combustion leak detector fluid. Block Tester fluid not included.

CT1133

14pc Radiator Pressure Tester Kit

CT3738

Universal for Most Vehicles. Pressure Testing Pump with Gauge. Temperature Testing.

CT1137 Block Tester Kit with Block Tester Powder Detects exhaust gasses in radiators and so checks for gasket damage, or cracked and warped cylinders. Works with Petrol engines. Not recommended for Diesel vehicles.

Block Tester Powder & 100ml Bottle For use with CT1133 or CT3923.



Ratchet Hose Clamp Pliers Jaw Range 22 - 55mm make installing and removing flat-type hose clamps in hidden and hard to reach areas easier. Fits most ring-type or flat-band hose clamps. With ratchet locking mechanism. Special Jaws design to access hose clamps in any position.

www.cannontools.co.uk


Section 5

Hose Pipe & Tubing Tools CT0739

Forceps CT0226 CT0227 CT0228 CT0229

3 - 22mm Mini Tube Cutter

4” Straight 6” Straight 4” Curved 6” Curved Fr o

CT0894

o9 Ø

0m

m

CT1587

Hose Clamps

Forceps CT0891 CT0893 CT0892

t m8

10” Straight 15” Straight 10” Curved 15” Curved

CT2507 CT2508 CT2509

5pc set 8-12mm 5pc set 10-16mm 5pc set 12-20mm

CT2510 CT2511 CT2512 CT2513 CT2514 CT2515 CT2516 CT2517

5pc 5pc 5pc 4pc 3pc 3pc 3pc 3pc

set set set set set set set set

16-25mm 18-32mm 25-40mm 30-50mm 40-60mm 50-70mm 60-80mm 70-90mm

Tube Cutter 6 - 29mm or 1/4” - 11/8” Soft Metals PVC and Rubber. Squeeze to fit one hand operation. Easy Rotation. Self-Adjusting. 3 Blade Cutting Action

CT0085

Tube Cutter Ratchet mechanism. Cutting Diameter 42mm / 1-5/8” For cutting most kinds of plastic. Light aluminium body for easy working.

CT3932 CT0763 CT1588

3 Way Hose Clamp Tool Use with a 14mm Wrench or 1/4”Dr Bar. Max Capacity - 65mm, 106mm. This Tool has 3 different jaws to allow multiple use with various hose clips and clamps

34pc Hose Clamp Set 25, 32, 40, 45, 50, 55, 65, 70mm Ø

CT1637

CT1507

3 - 23mm Ratchet Tube Cutter Stainless Steel Copper and Aluminium. Cuts with minimum rotatation, ratchet mechanism allows access to confined areas.

CT2772 Tube and Trim Cutter With Utility Knife Blade.

3pc Hose Clamp Set - 6, 7, 10” Ideal for Brakes Radiators Air Conditioning etc.

26pc Hose Clamp Set Zinc Plated For use securing automotive hoses to pipes with 16, 22, 25, 28, 35 and 40mm Ø

Multi-Angle Anvil for 45° to 120° Angles. Ideal for cutting Window Gaskets, Plastic Trim, Tubing and Conduit.

CT1691

CT3184

CT3732

4pc Hose Clamp Set 4 Fluid Line Clamps

Tube Cutter Hose Clamp Kit - 3M x 8mm Metal Band Hose Clamp Kit with 8 Tension Clamps

NEILSEN

Distributed by Cannon Tools Limited

with Stainless Steel Blade. For Soft Materials like PVC / PPR / PE and PEX Tubing.


Fluid Transfer Equipment CT3104

CT3798

Suitable for Oil and Fluids

Section 5

CT2365 9 litre Pneumatic Fluid Extractor

25mm Fluid Transfer Pump Heavy Duty Drill Pump

CT3105

6mm Drill Shaft. 1/2” diameter Hose. Max. Output - 1500 litres per hour at 3000 rpm Max. Pumping Height - 15M

32mm Fluid Transfer Pump

CT3005

CT2935

Fluid Transfer Pump Quick fit nozzle dispenses 1 fl/oz. Convenient and versatile for difficult access. NOT suitable for brake fluid.

Fluid Transfer Pipe 2M Fluid or Fluel Transfer Pipe. No need for mouth contact. Liquid flow can be controlled. Works in shallow containers.

CT2366 9 litre Manual and Pneumatic Fluid Extractor

CT2567

CT0971 25mm Barrel Pump

Multi-Use Transfer Pump with 50” / 1270mm Hose

CT0973 CT3604

Large Syphon Pump

CT3338 Small Syphon Pump

Barrel Pump General purpose lever action barrel pump fits 5 to 55 gallon drums with 9 fluid oz per stroke. Suitable for Fuel or water based fluids

CT3339 2pc Syphon Pump Set

www.cannontools.co.uk


Section 5

Fluid & Oil Transfer Equipment

CT1262

CT2808

Oil Cans with Nozzles

Jerry Can 20 litres

CT0337 CT0338 CT0340

1/4 pint 1/2 pint 1 pint

Oil Can and Lubrication Gun

CT1120 2 litre Measuring Jug

CT0383 CT3853 Flexible Jerry Can Spout

CT3936

Suits 5L, 10L and 20L jerry cans. Robust leak free seal. Ideal for CT1262.

4pc Funnel Set 75, 90, 120, 135mm Ø

CT1044 5 Gallon Pneumatic Oil / Fluid Extractor Vacuum Transfer Pump

2 litre Oil Can Weight - 200 - 220g Size - 149 x 119 x 310mm Material - Pe

CT3852

CT3984

4pc Funnel Set 65, 85, 105, 125mm Ø

6 litre Oil Can Material - Pe Blue

CT1320 Funnel - 8" Plastic

CT3725 CT0420 2 in 1 Funnel Set 500cc Oil Suction Gun Removes and replaces any non-corrosive liquid. Perfect for Transmissions . Differentials . Gear Boxes . Crankcases. No priming necessary. Knurled thick wall barrel for secure grip. 12in. / 300mm flexible hose.

NEILSEN

Distributed by Cannon Tools Limited


Section 5

Oil Drain Pan Tools CT4020

CT0399

7pc Oil Pan Thread Repair Sets Supplied with Taps, Oil Drain Plugs and washers.

Square Key

14pc Oil Drain Sump Plug Set For use with 17mm sockets or spanners Hex keys : 8, 9, 10, 12, 14, 17mm Spline Key : M16. Square Keys : 8, 9, 10, 11, 12, 13mm Triple Square Tamperproof Key

Oil Pan Thread Repair Kits CT2750 CT2751 CT2752 CT2753

8 and 10mm Square Key for Oil Sump Plugs and Gearboxes .

13mm 15mm 17mm 20mm

CT1767

CT3667 CT2269

2 litre Motorcycle Oil Drain Pan 18pc Oil Drain Sump Plug Set CT2484 10 litre Fluid Draining Tank for Oil or Water

With 3/8”Dr Comfort Grip Power Bar. Hex : 8, 9, 10, 11, 12, 14, 17mm. Square : 5/16” and 3/8”. 7, 8, 10, 11, 12, 13, 14mm. Triangular : 10mm and 10mm Socket.

24pc Oil Pan Thread Repair Set M13, M15, M17, M20. Oil Drain Plugs may need to be replaced because of stripped threads Suitable for Cars, Motorbikes, Trucks and Vans.

CT4081

CT3593 CT3548 Truck and Trailer Wheel Pan

Oil Dipstick Automatic Transmission Oil Dipstick for Audi A6 / 100 models without dipstick : C1 / 1970 - 1976 | C2 / 1976 1982 | C3 / 1982 - 1990 | C4 / 1990 - 1994

CT4080

114pc Oil Pan Thread Repair Set Ideal for repairing sump, gearbox and differential drain plug threads. Used to tap the damaged thread slightly over size then fit a new drain plug and washer supplied. Suitable for the most popular threads used on cars and light commercial vehicles. Tap Sizes : M13 x 1.25, M13 x 1.5, M15 x 1.5, M17 x 1.5, M20 x 1.5, M22 x 1.5mm.

CT1589

CT2907 10 litre Fluid Draining Tank for Oil or Water CT3012 4pc Mercedes Oil Dipstick Gauge Set Galvanised Steel Drain Pan 3.5 Gallon - Galvanised Steel Drain Pan

for vehicles with no oil gauges. Gearbox Oil - Green : 920mm long Gearbox Oil - Red : 1220mm long Engine Oil - Blue : 930mm long Engine Oil - Yellow : 930mm long

534pc Oil Drain Plug Screws and O-Ring Set Plug Screws : M10, M12, M13, M14, M15, M16, M18, M20 O-Rings : 6, 8, 10, 12, 13, 14, 15, 16, 18, 20mm Aluminium Oil Drain Plugs may need to be replaced because of stripped threads. Suitable for Cars, Motorbikes, Trucks and Vans.

www.cannontools.co.uk


Section 5

Oil Filter Tools

CT3549

CT3679

CT2385

27mm Oil Filter Housing Wrench 46mm Haldex Oil Filter Wrench

Chain Oil Filter Wrench

for Haldex Clutch fitted to VAG 4WD Vehicles

Fits Oil Filters up to 120mm Ø

CT1124 CT3602 CT3020 3 Leg Oil Filter Wrench 31/2” - 37/8” 90° Swivel Band

Oil Filter Wrench Swivel to access screw on filters in a confined space.

3/8”Dr with 1/2”Dr Adaptor 2.5 - 4.75” / 63.5mm - 120mm Use with 21mm spanner or socket.

Adjustable Oil Filter Wrench - 1/2”Dr

CT1512

80mm to 105mm - Spring Tensioned Can also be used with 22mm wrench or socket

CT3959

Oil Filter Pliers

CT1143

Slip Joint Pliers with 55 - 125mm Capacity

Oil Filter Cup Type Wrench

CT1586

3/8”Drive or 27mm Hex for Sockets Filter Diameter: 92.5mm / 15 Flutes Applicable to : LR4 / Range Rover / Range Rover Sport

57 - 120mm

Swivel Jaw Oil Filter Pliers 12” / 300mm

with Jaws that swivel 90° in each direction giving 180° movement and 5 variable positions.

Oil Filter Pliers 55 - 125mm Capacity

CT3605

TOYOTA 1983 to 2006.

CT3398 CT3448

3pc Oil Filter Cup Wrench Set

3pc Oil Filter Cup Wrench Set

Oil Filter Wrench Tool with Adaptable Legs For Oil Filters 55 - 95mm Diameter Torque - 150Nm min Anti-Slip Legs in 2 Sizes Easy Fit Tool with Magnetic Base.

Sizes : 64, 73, 74mm Use with a 22mm Socket or Spanner

27/6mm, 76/12mm, 96/18mm for Renault vehicles.

CT3601 CT3606

CT1780

6pc Oil Filter Cup Wrench Set 5pc 3/8”Dr Oil Filter Socket Set Sizes - 24, 27, 32, 36, 38mm

NEILSEN

Distributed by Cannon Tools Limited

3/8”Dr with 12”Dr Adaptor Sizes : 65, 67mm 14F . 74, 76mm 15F . 76mm 14F 76, 80, 93mm with 15, 30, 36 Flutes. 93mm x 15F Nylon Composite material for extra strength and durability

9pc Oil Filter Cup Wrench Set 6 Flutes : 86.6mm 14 Flutes : 64.5mm and 74.2mm 15 Flutes : 88.8mm Adjustable Wrench : 27, 32, 36mm


Grease Guns & Oil Filter Tools CT1224

CT2967

Section 5

CT1656

23pc Oil Filter Wrench Set Shallow and Deep with Ratchet and Ring Spanner.

16pc Oil Filter Wrench Set

30pc Oil Filter Wrench Set

Sizes : 65 - 100mm with 14 and 15 flutes 3/8” Drive with 1/2”F to 3/8”M Adaptor

8 Flute : 74mm 12 Flute : 75, 76mm 14 Flute : 65, 67, 73, 74mm 15 Flute : 73, 74, 75, 79, 79.5, 89, 90, 91, 92, 95, 101mm 18 Flute : 84mm

CT4136

CT4137

CT3286

Mini Grease Gun

2 x 100g Multi-Purpose Lithium Grease Tubes

2 x 3oz Grease Cartridge Set

plus 100g Lithium Grease Tube Ideal for Precise Lubrication like Bike Maintenance. Max. Pressure : 1000psi Delivery 18g per 40 strokes N.L.G.I. : No.2 Grade

Sizes : 66 - 108mm with 6 - 18 flutes 3 Leg Oil Filter Wrench 3/8”Dr 1/2”F to 3/8”M Dr Adaptor

Suitable fot CT2874 below

for CT4136 Mini Grease Gun N.L.G.I. : No2 Grade

CT1088 CT0583

CT2874

15oz Grease Gun 500cc Grease Gun Hand or Air Powered

Die Cast Pump Head with Air Bleed. Can be used with Cartridge or Bulk Grease. Supplied with Rigid and Flexible Tubes.

Delivers 1.7oz of grease per 100 strokes. Supplied with Rigid and Flexible Nozzle.

CT1113 CT0460

14oz Grease Gun

3oz Grease Gun with Pistol Grip 180mm Rigid Nozzle and 265mm Flexible Hose. Ideal for areas difficult to reach. Suitable for universal joint and general purpose greasing applications.

CT2873

Leaver Type Suitable for loading 3 ways; Standard 14oz Cartridge, Pressure filler or Bulk 400cc Supplied with Rigid and Flexible Tubes.

CT1206 18V Cordless Grease Gun 7pc Grease Gun Adaptor Kit For use with all leading brands of manual grease guns. With adaptors to make almost any lubricating job easy.

Ideal for where power and speed are required. 400g cartridges or manual and bulk filling. Features LCD battery condition indicator. Heavy duty aluminium pressure head. 2 x 18 Volt 1.7Ah batteries. 230V Charger - 1 hour fast charge. Pressure : 5000 psi.

15oz Grease Gun with Pistol Grip Rigid Nozzle and Flexible Hose.

www.cannontools.co.uk


Section 5

Brake Service Equipment

CT3414

CT3203

CT2105

Brake Pressure Test Kit

Brake & Clutch Pressure Bleeder Kit One-man pressure brake and clutch bleeding system suitable for the professional workshop. Low pressure tank 0 - 40psi can be pre-charged with compressed air - making the unit fully portable. Large reservoir means reduced risk of running the system dry during bleeding process or complete fluid change. Suitable for use on ABS systems. Supplied with a range of European, Japanese and US vehicle adaptors.

2 - 3000 PSI Gauge Assembly Pressure Adapter. Teves Adapter. 45 degree Swivel Fitting. 90 degree Swivel Fitting. M10-1.0 Bleeder Adapter. Straight Fittings 1/4-28, 3/8-24, 5/16-24, 7/16-20, 7/16-24 Straight Fittings - M10-1.5, M8-1.25, M10-1.0, M7-1.0.

Brake Bleeder and Adaptors Professional Brake Bleeder with PCL Air Fitting

CT3686

CT3258

CT3202

Brake Fluid Bleed Kit

21pc Fluid Bleeding Kit Vacuum, Pressure Pump and Brake Bleeding Kit. Checks vacuum and pressure operated automotive components. Can be used to bleed hydraulic systems or siphon fluids.

Brake and Clutch Master Cylinder Pressure Test Kit

Professional Brake Bleeder with PCL Air Fitting and fluid supply bottle. Quick clean and efficient operation without specialized brake reservoir caps. Draws fluid from brake nozzle enabling brake bleeding or full replacement of fluid system.

CT2367

CT2311

Comes with complete range of Adaptors which install directly into master cylinder access holes. Measures pressure at front or back of master cylinder. Pressure gauge 0 - 300 psi and is accurate to 4% of scale. JIC quick disconnect for easy connection

CT3024 Brake Bleeder Kit With 3 Adaptors and Hoses Plus Magnetic Pad for securing Bottle while in use

Vacuum Pump Pump with Vacuum Gauge, 2 x 2ft Lengths of Tubing, 8 Vacuum Adaptors . Brake Bleed Adaptors. Brake Fluid Reservoir. Works on all vehicle makes and models.

NEILSEN

Distributed by Cannon Tools Limited

2pc Brake Fluid Extractor and Refill Kit 1 and 2 litre Pneumatic


Brake Service Equipment CT2756

CT3785

Brake Cylinder Hone 3/4 to 2-1/2 inch diameter Flexible shaft for ease of use and self centering CT2270 Brake Calliper File 150mm Blade

Section 5

CT1522

10pc Pipe Flaring Kit Dial Test Indicator

Steel Compressor Yoke, Flaring Tool and Flaring Dies : 5, 6, 8, 10, 12, 14, 16mm.

0 - 10mm Dial in 0.01mm increments. Magnetic base with fine adjustment. Magnet has a 60kg pull. On / Off Switch for easy positioning. Ideal for checking ‘run-out’ on disc brakes.

CT2556

CT3893

7pc Brake Pipe Flaring Kit For Single or Double flaring Aluminium and Copper Tubing. : 4.8 - 12.7mm or 3/16, 1/4, 5/16, 3/8, 1/2”

CT0652

15pc Brake Calliper Thread Repair Set Brake Fluid Tester AAA Battery included

CT1374

For rethreading brake calliper bolt holes. Kit includes M12 x 1.5mm tap step drill insert locator Washers with centre roller bearing 10 replacement inserts.

6pc Pipe Flaring Kit

CT3512

CT3370

Steel Compressor Yoke : 3/16, 1/4, 5/16, 3/8, 1/2, 5/8” Flaring Tool, Flexible Tube Benders, Tube Cutter 3 - 28mm.

120mm Tube Bending Tool 16pc Brake Calliper Thread Repair Set

CT3371

235mm Tube Bending Tool

with Titanium coated core drill Tap and 10 threaded inserts for Ford, Seat, Vauxhall, Volkswagen.

CT0572 Brake Flaring Tool For creating conical or tapered flares in Brass or Aluminium tubing. Size range : 5 - 16mm . 3/16 - 5/8 in.

CT4133 CT2732

CT2620

12pc Brake Calliper Thread Repair Set

Brake Pipe Bender Brake Pipe Bender for 3. 4. 6mm diameter Tubing

Used for repairing faulty inner threads on brake calliper guide bolts in wheel bearing housing brake calliper carriers with NO need to remove the wheel bearings or struts. For use on most Ford, GM, and VAG vehicles.

6pc Brake Pipe Flaring Kit With Quick Release Dies. 3/16” or 4.75mm Diameter Tube Flaring Tool Secure Clamping with Quick Release.

www.cannontools.co.uk


Section 5

Brake Service Tools

CT3330

CT3613

Brake Piston Wind-Back Tool 3/8”Dr with Reaction Plate and Reversible Key For use on disc brake callipers fitted to most European and Japanese cars.

CT3680

CT1225

7pc Brake Piston Wind Back Set For Push-back and Wind-back disc brake pistons For brake pad replacement and calliper servicing on collette type brakes

19pc Brake Piston Calliper Wind-Back Kit

CT1956

Enables the Rewinding of Pistons back into the core on most Disc Brake Callipers. Allows Servicing and Replacement of Worn Pads on both Wind Back and Push Back Type Brakes. Right and Left Hand Side Spindles.

Brake Piston Wind-Back Tool Citroen Zantia. Peugeot 306, 404, 405, 406 . 806 Renault Laguna.

Brake Piston Wind-Back Tool

CT3942

80-100psi with right and left hand operation Suitable for both push back and wind back brakes. Compatible with 3/8 inch square drive adaptors. Converter to allow use with two pin adaptors.

CT3234

CT1868 2 in 1Brake Piston Wind-Back Tool Set

19pc Brake Piston Wind Back Set - 19pc

CT2590

Right and Left Reaction in One 3/8”Dr Force Screw with reaction body Reaction Plate, 3/8”Dr Adaptor and 16 Adaptors

16pc Brake Piston Calliper Wind-Back Kit Brake Piston Wind-Back Tool - RH 3/8”Dr with Reaction Plate and Reversible Key. For use on disc brake callipers fitted to most European and Japanese cars

CT2234

Air Powered Wind-back Tool 80-100psi. Compatible with 3/8” square Adaptors. Right and Left hand Operation. Converter for 2 pin Adaptors. 15 Wind-Back Keys. Instructions and full details of vehicle applications inside. For the Removal and Replacement of brake disc pads.

CT2945 CT3943

Brake Piston Wind-Back Tool Right and Left Reaction in One Reaction Plate and 3/8”Dr Adaptor 3/8”Dr Force Screw with reaction body

NEILSEN

Distributed by Cannon Tools Limited

Brake Pad Compressor

35pc Brake Piston Calliper Wind-Back Kit

Fast acting hand held compressor with plunger. Makes brake pad replacement a much easier job.

Left and Right Hand Brake Piston Calliper Wind Back Kit. 24 Adaptors and Calliper Keys. 6 and 7mm Hex Keys. 3 and 5mm Pin Punches. 4 Special Reaction Plates. CV Joint Grease.


Brake Service Tools CT2300

CT2302

CT1893

Brake Pad Speader Suitable for most ATE, Bendix, Delco and Girling Callipers. Use on standard and 4-Piston Disc Brakes. Lightweight design is Fast and Simple to use.

Disc Brake Pad Puller For the quick removal of disc brake pads. Especially useful where brakes have seized. With mini slide hammer to ease pad from calliper.

CT0078

3pc 1/2”Dr Socket and Bit Set Brake Servicing Kit with Pentagon Profile

CT4025

CT3683

Disc Brake Piston Compressor

Section 5

Special wide compressor for 4 piston callipers. Jaw width - 88mm Applicable to BMW and Mecedes Benz

3/8”Dr Hex Bit Set Sizes : H7 x 36 mm | H9 x 92 mm Designed to replace the brake lining. on BMW, Ford, Mazda, Mercedes, VAG.

Motorcycle Brake Piston Tool Set CT2301

For dismantling motorcycle brakes with sliding callipers. Removes frozen pistons with ease. Includes 12 universal adaptors - 19 to 30mm. Will not mark or damage the working part of the piston. Suitable for nearly all makes and models

CT2055

CT2575

9pc Hex & Star Bit Set Star Bit 1/2”Dr - T60 Star Bits 3/8”Dr - T40. T45. T50 Hex Bits 3/8”Dr - 1/4” . 3/8” and 7. 8. 10mm Disc Brake Calliper Service Set. Chrome Vanadium

Disc Brake Pad Spreader For servicing new brake pads on most ATE / Bendix / Delco and Girling callipers.

CT3934

CT0123

Ratchet Disc Brake Pad Spreader allows a full 360° swing so that the spreader may be placed at any position. Allows work on twin and quad piston fixed callipers, as well as single and twin piston floating callipers.

8pc Brake Tool Set Brake Spring Pliers. Brake Adjustment Spoons Spring Compressor, Spring Installer and Removal Tools

7pc Hex Bit Set Sizes : 3, 4, 5, 6, 7, 8,10mm 110mm Long with Ball End Suitable for Automotive Brake Servicing.

CT2112

CT0124

CT3607

Twin Bolt Disc Brake Pad Spreader

6pc Brake Spanner Set

Used to compress pistons back into callipers when installing new brake pads on any single or dual sliding type calliper. Swivelling nose pieces reduce the chance of piston cocking. Fine threaded screws for added pressure

Square : 10mm, 1/4”, 11/32” Open End : 1/4”, 5/16”, 7/16” Hex : 7, 8, 9, 10, 11mm, 1/4”

101

7pc Spline Bit Set Sizes : M4, M5, M6, M7, M8, M9, M10 110mm Long Suitable for Cylinder Head Removal and Brake Servicing.

www.cannontools.co.uk


Section 5

Wheel & Tyre Service Tools

CT3541

3pc BMW Rim Lock Set - 1/2”Dr Sizes : 17T x 14.5mm / 10T x 16mm / 21T x 16.5mm

CT3985

CT3987

10pc BMW Unique Spline Bit Set for Wheel Locks

10pc BMW Unique Ribe Bit Set for Wheel Locks

Master Set of Tamper Proof Bits for removing the locking wheel nuts on BWW Vehicles. Mixed 13 to 23 point profiles Use with a 17mm Wheel Nut Socket

Master Set of Multi-ribe Bits for removing the locking wheel nuts on BMW Vehicles Mixed 7 to 16 rib profiles Use with a 17mm Wheel Nut Socket

CT4131

CT3986

CT4132

22pc BMW Wheel Lock Key Set Special Shape Keys for Anti-Theft Wheel Nuts. Suitable for most BMW vehicles. Supplied with a 1/2”Dr Socket Adaptor or can be used with a 21mm Socket or Spanner.

CT3988

22pc VAG Wheel Lock Key Set Special Shape Keys for Anti-Theft Wheel Nuts. Suitable for most Audi vehicles 2002-2012 Supplied with a 1/2”Dr Alloy Wheel Socket or can be used with a 21mm Socket or Spanner.

10pc VAG Unique Spline Bit Set for Wheel Locks Master Set of Tamper Proof Bits for removing the locking wheel nuts on VAG Vehicles. Mixed 10 to 21 point profiles Use with a 17mm Wheel Nut Socket

CT3912 CT4151 2pc Emergency Wheel Lug Nut Socket Set 22pc Porsche Wheel Lock Key Set

23pc VAG Unique Ribe & Spline Bit Set for Wheel Locks

Multi-Spline Sockets for removing Porsche locking wheel nuts. Also suitable for VW Touareg. Use with a 19mm Alloy Wheel Nut Socket

Master Set of Multi-Ribe and Spline Bits for removing the locking wheel nuts on VAG Vehicles. Mixed 6 to 17 Rib profiles and 10 to 21 Point profiles 17mm Alloy Wheel Nut Socket included

CT4152

CT3935

Mercedes Wheel Lug Nut Socket

CT2541 Tyre Tread Depth Gauge and Key Fob

22pc Audi Wheel Lock Key Set Special Sockets for removing locking wheel nuts on Audi vehicles. use with a 17mm Alloy Wheel Nut Socket.

CT2540

17mm x 88mm 1/2”Dr Designed for Convex 17mm Wheel Bolts. Using a standard socket will damage the wheel bolt.

CT1715

CT1202

2 Rubber Wheel Chocks

Digital Tyre Tread Depth Gauge Large LCD Display. Readings in Metric or Inches. Can also be used for brake shoe and pad wear

NEILSEN

Will remove locking lug nuts if the key is misplaced / lost or worn. Will remove lug nuts when the head is stripped / worn or damaged. 13/16 in. and 1 in. sizes fit lug nuts and bolts on most vehicles. Impact Quality

Distributed by Cannon Tools Limited

with 1.1M Rope and Reflective strips. Size : 12.5 x 8 x 6.5cm Net Weight : 300g

Wheel Clamp Fits 13 / 14 and 15 inch Wheels. Tyre Width 220mm Ideal for Caravans, Motor Homes and Cars 3 Strong Arms 1.5”. Easy to fit and remove.


Wheel & Tyre Service Tools CT4172

CT3228

Section 5

CT4146

Digital Tyre Pressure Gauge

23mm 5pt Pentagon Socket

with Tyre Depth Gauge

For releasing the spare wheels from certain Toyota and Lexus vehicles. 3/8”Dr / 100mm Long

12pc Automotive TPMS Kit

CT0342

CT3961

4 Way Cross Wheel Brace

Tyre Valve Screwdriver for Short and Long Valves.

Tyre Pressure Monitoring System. with Torque Wrench, Sockets and Star Bits. For the removal of the valve sensor unit.

CT2374 250psi Mini Air Compressor

CT3293 Tyre Pressure Gauge

CT0539

with 2 way Head

21” Extending Wheel Wrench Reversible Socket

1/2”Dr for use with CT0539

Single Cylinder Foot Pump

High Pressure with Non-Slip Foot Plate Locking Valve-Connector. Adaptors Included.

CT2574 Digital Tyre Pressure Gauge

CT0540 21 / 23mm Flip Socket

CT1378

CT1379 CT2113

2 Cylinder High Pressure Foot Pump

Wheel Stud Alignment Tools CT1333 16” 4 Way Wheel Wrench

For Mounting Wheels especially Mercedes Models with Long Bolts. Sizes : 12mm x 1.25, 12mm x 1.5, 12mm x 1.75, 14mm x 1.5

with Non-Slip Foot Plate Locking Valve-Connector. Adaptors Included.

CT0247 CT3446 Wheel Stud Thread Restorer

4 Individual Arms with central hub Sizes : 17, 19, 21mm with 1/2”Dr. Can be used alone with 14mm spanner or socket

M12 x 1.25, M12 x 1.5, M14 x 1.5mm. Adaptor Hex size - 24mm.

Single Cylinder Foot Pump 0 - 100psi / 0 - 7kg/cm With 500mm hose, Connectors, and Rubber foot plate for sure grip.

CT2035

4 Way Folding Wheel Brace 350mm Folding Lug Wrench. Sizes - 17, 19, 21, 23mm

CT1127

CT0246

Wheel Budd Internal Thread Restoring Kit

Twin Cylinder Foot Pump

For Use on Vehicles that use Budd Wheel Nuts PSA | BMW | Mercedes | Volvo | VAG Vehicles

0 - 100psi / 0 - 7kg/cm With 500mm hose, Connectors, and Rubber foot plate for sure grip.

www.cannontools.co.uk


Section 5

Cordless Ratchets & Impact Wrenches

CT2045 10.8V

CT1897

CT0768

19.2V

24V

Cordless Mini Ratchet - 10.8V 1/4”Dr Max Torque : 350kg-cm / 25ft-lb No-Load Speed : 220rpm Battery : 10.8V Lithium Ion Charging Time : 1Hr Auto cut-off Weight : 0.8kg

Cordless Impact Wrench 1/2”Dr Variable speed with reverse Maximum torque : 320 Nm No-load speed : 0 - 2200 rpm Impact rate : 0 - 4400 rpm 1 Hr quick charge Weight : 2.5Kg

CT2047 10.8V

Cordless Mini Ratchet - 10.8V 1/4”Dr Max Torque : 350kg-cm / 25ft-lb No-Load Speed : 220rpm Battery : 10.8V Lithium Ion Charging Time : 1Hr Auto cut-off Weight : 0.8kg

Cordless Impact Wrench 1/2”Dr with 3 19.2V Ni-Cd / 2.0Ah Batteries Max Torque : 400 Nm / 295ft-lb No-Load Speed : 2000 rpm Impacts per minute : 2600 1Hr Charging Time

CT1898 CT2048

19.2V Battery for CT1897

10.8V

CT2854 24V Battery for CT0768

Cordless Mini Ratchet - 10.8V 1/2”Dr Max Torque : 630kg-cm / 45ft-lb No-Load Speed : 180rpm Battery : 10.8V Lithium Ion Charging Time : 1Hr Auto cut-off Weight : 1.25kg

CT3995 18V CT2543 24V Battery Charger

600Nm

for CT0768

CT2049 10.8V

Cordless Impact Wrench

10.8V Battery for CT2045 / CT2046 / CT2047 / CT2048

CT2050 10.8V

CT2858

10.8V Battery Charger for CT2045 / CT2046 / CT2047 / CT2048

NEILSEN

Distributed by Cannon Tools Limited

CT0768-1

1/2”Dr 18V 4.0AH Li-Ion Battery. Max torque: 600Nm. No load speed : 1600rpm. Max impact rate : 200bpm. Battery Charger included. 100 minute quick charger.

18V Battery for CT3995

CT2859

18V Battery Charger for CT3995

24V Nose Cone for CT0768

Please see Pages 132-133 for Air Ratchets & Impact Wrenches


Wired & Cordless Impact Wrenches CT0079

CT3970

230V

18V Cordless Impact Wrench

Section 5

1/2”Dr with Brushless Motor Max Torque : 350Nm No load Speed : 0-1000/0-1500/0-2000/min Impact Rate : 0-1400/0-2200/0-2900bpm 2 Batteries : 1.5Ah Lithium lon with Charger 2 speed gear box

Power Impact Wrench 1/2” Drive Max Torque : 450Nm 230 Volt / 1010 Watts Frequency : 50Hz No Load Speed : 2200rpm With 1/2 in. Drive sockets : 17, 19, 21, 22mm

CT3730-1 24V Battery for CT3730

CT3730 24V

CT3730-2 24V Charger for CT3730

CT3141-2 24V Battery for CT3141 1300MAh

Cordless Impact Wrench 1/2” Square Drive Lithium Ion Batteries Power : 24V 1.3Ah Li-Ion Max Torque : 300Nm Speed : 0 - 2200rpm Impact frequency : 0 - 2900rpm With 2 1.3Ah batteries and 24V Charger : 1Hr fast charge

CT3141 24V

CT3141-3 24V Nose Cone for CT3141

CT3639 24V Trigger for CT0768 and CT3141

Cordless Impact Wrench 1/2” Square Drive 24V Variable speed with reverse Maximum torque : 410 Nm No-load speed : 0 - 2200 rpm Impact rate : 0 - 4400 rpm 1 Hr quick charge

CT3141-1

24V Spare Charger for CT3141

www.cannontools.co.uk


Section 5

Tyre Service Tools

CT0663

CT2598

2pc Tyre Lever set

CT0765 Tyre Changer Pneumatic bead-breaker slide with step function. Bead-Breaker Force - 2500kg. Max Wheel Diameter - 960mm. Wheel Width - 75 - 280mm. Operating Pressure - 8 bar approx. Rim Clamping Form Outside - 250 - 460mm. Rim Clamping Form Inside - 300 - 510mm. Motor Power - 0.75kw approx. Power Supply - 230V - 50Hz

12” / 300mm

CT2582 12” / 300mm Tyre Lever

Tyre Changer Tyre Levers CT2197 CT2198 CT2199 CT3560

12” 20” 24” 36”

/ / / /

300mm 500mm 600mm 920mm

4” to 16.5” Diameter Heavy duty tyre changer suitable for a wide variety of tyres and wheels. Including those fitted to motorcycles ATVs go-carts and golf buggies. 2 Centre posts with 4 shaft sizes. Height - 1275mm

Please Check out Section 2 for more Wheel Nut Sockets

CT2597 Portable Tyre Changer with Pry Bar

CT1341

CT4091 4.5kg Deadblow Hammer or Bumping Hammer Heavy duty for trucks and SUVs. 105mm Rubber Head. Low blow-back due to steel balls in the head which provides increased impact for loosening stuck wheel rims when changing tyres. Handle length: 780mm Weight : 4500g

5pc Impact Socket Set - 1/2”Dr Sizes : 30, 32, 34, 35, 36mm for Wheel Hub Nuts.

CT0920

3pc Deep Impact Socket Set - 1/2”Dr Sizes : 17,19, 21mm. Thin Wall and Protective Sleeve for Alloy Wheels.

NEILSEN

Distributed by Cannon Tools Limited

CT0767

Tyre Mending Machine 30V - 50HZ / 0.6KW Working temperature - 130°C Heating unit dimension. 190 x 100mm Mobile support plate can maintain a constant pressure on the inner tube.


Tyre Service Tools CT2880

CT0766

Section 5

CT2881 110V - Electric Wheel Balancer Various balancing modes with self-calibration and diagnostics. Automatic distance and wheel diameter measuring. Plastic safe guard activates start and stop operation. Optional universal wheel flange motorcycle adaptor and centring cone. Max. wheel weight : 65kg Balancing accuracy : ± 1g Balancing speed : 200rpm Rim diameter : 10 - 24” Rim width : 1.5 - 20” Noise level : 70db

230V Electric Tyre Changer Motor power : 0.75kw / 1.1kw Power supply : 110V / 220V / 380V Max. Wheel Diameter : 41” / 1040mm Max. Wheel width : 14” / 355mm Ouside clamping : 12 - 24” Inside clamping : 14 -26” Air supply : 8bar - 10bar Bead breaker force : 2500kg Noise level : <70db Package size : 108 x 90 x 96cm ( main body ) 105 x 45 x 43cm ( right help arm ) Pneumatically operated tilting column with arms and tubeless tyre inflation system. Designed for low-profile EMT and high-performance tyres and wheels . Loosening upper bead for demounting . Pneumatic-powered lower lifting arm holds lower bead into the wheel drop while lower bead is lifted over the mount/demount head. Pneumatic-powered lower lifting arm re-loosens lower bead if it re-seats.

CT3290

Wheel Balancer Max. Wheel Weight - 65kg Motor Power : 0.2kw approx. Power Supply : 230V - 50Hz Balancing Accuracy : plus or minus 1g Balancing Speed : 200rpm approx Rim Diameter : 10 - 24”/ 265 - 610mm Rim Width : 1.5 - 20” / 40 - 510mm Measuring Time : 8 sec approx. Double display. Self calibration. Dynamic program and static program. Aluminium program. Protection cover. Change between Gram and Ounce. Change between Metric and Inches. Optimisation of wheel unbalance reading. Setting for double operator. Special flange is optional.

CT2872

Tubeless Tyre Emergency Repair Seal Kit For Radial and Steel Belted Tubeless Tyres. Use in conjunction with Self Vulcanising Strings and Rubber Cement. ( Not supplied )

CT1592 Wheel Weight Tool

CT1108 Portable Wheel Balancer Bulls eye spirit level to balance wheels quickly. Aluminium head accepts hub. Height : 22.5/8” Diameter : 11.7/8”

Wheel Balance Spare Power Board Power Board to fit CT0766

www.cannontools.co.uk


Section 5

Ball Joint & Tie Rod Service Tools

CT3691

CT1578

CT1577

Univesal Ball Joint Puller

Ball Joint Separator

Ball Joint Separator

For all types of vehicles 20mm Jaw opening adjustable up to 50mm

Opening : 19mm Scissor Type. Reach : 20 - 50mm

Opening : 19mm Scissor Type. Reach : 20 - 40mm

CT3252

CT1510

CT3250

Ball Joint Separator

Tie Rod Puller

Size - 19 - 22mm

for front wheel drive vehicles with rack and pinion steering.

CT3962

CT3015

CT3014

Audi / VW Ball Joint Tool

Tie Rod / Pitman Arm Puller

for holding the lower ball joint when removing and installing on Audi A4, A5, A6, A7, Q5

Opening size - 27mm Pull travel - 54mm

Opening size - 33mm Pull travel - 63mm Fits most cars and vans

CT3249

CT3610

CT3504

Scissor Ball Joint Separator

3pc Ball Joint Separator Set

5pc Ball Joint & Tie Rod Separator Set Automotive front-end service set for the removal of most types of Pitman Arms.

Low profile set suitable for most modern vehicles. Features heavy duty forged steel body and hardened screw with thrust ball. 3 sizes of jaw allow use on most cars and light commercial vehicles.

CT1301

CT3100

Tie Rod / Pitman Arm Puller

Ball Joint Separator Kit Interchangeable Heads A robust and adaptable service kit for most ball joints. Jaw Sizes : 20, 22, 24, 27, 30mm Thrust Screw Length - 100mm. Pivot Rod Length - 125mm

CT2831 Ball Joint Separator Jaw size 15/16”

5pc Fork Type Ball Joint Separator Tie Rod / Pitman Arm Tool Kit Tie Rod Spreader with 11/16 inch Wedge Opening. Ball Joint Separator with 15/16 inch Jaw Opening. Pitman Arm Wedge with 1.1/8 inch Opening. 8” Handle for use with a regular hammer. Handle with 0.401 inch Shank for use with an air impact hammer. Both handles fit all three forks. Piloted handles act as shock absorbers to protect thread handles.

NEILSEN

5pc Ball Joint, Tie Rod Seperator Set Ball Joint Separator 15/16” Pitman Arm 1-1/8” . 1-5/8” . 1-7/16” Tie Rod Separator 11/16”

Distributed by Cannon Tools Limited


Section 5

Tie Rod & Steering Service Tools CT3739

CT3913

CT4012

Steering Rack Wrench Universal Tie Rod Wrench

1/2”Dr 25 - 55mm Heavy Duty Steering Rack Tie Rod Wrench Use to service all inner tie rod ends.

Range from 27mm to 42mmfor removing inner tie rod ends without dissassembling rack and pinion

1/2”Dr Capacity : 33 - 42mm Use to replace the inner tie rod ends without replacing the rack and pinion.

C3592

CT3881

CT3183

Universal Tie Rod Wrench - 1/2”Dr

Axle Joint Tool

7pc Universal Steering Knuckle Set Enables the servicing of struts and ball joints with aluminium or cast iron knuckles and centralized and non-centralized slots. 13mm Hex Drive Knuckle Spreader and 8, 10, 12mm Guide Pins. 5 and 8mm deep Spreader Inserts. Hexagonal Key.

400mm Steering Arm Removal Tool Track Rod End Remover. 28 / 35mm - 27mm Hex or 1/2”Dr Suitabe for most European vehicles

Tie Rod Service Set For tie rod servicing without additional alignment. Reduces the workload when changing tie rods. For replacement of defective tie rod head. Allows precise adjustment of new joint

CT3182 Axle Joint Tool

400mm Steering Arm Removal Tool - 35 / 45mm Track Rod End Remover. 35 / 45mm - 27mm Hex or 1/2”Dr Suitabe for most European vehicles

CT3758 CT3369 CT3383

5pc Tie Rod / Pitman Arm Adjustment Set 1/2”Dr Suitable for cars, vans and trucks. Sizes : 3/4”, 7/8”, 9/8”, 23/16”, 29/16” Allows 360 rotation of adjusting sleeve in tight areas.

CT3616

Bearing Puller Set Removes gears, pulleys, and steering wheels. Drop forged, heat treated steel attachments. 3lb x 390mm slide hammer with T-handle 8 - 32mm / 5/16 - 13/32"- 1-1/4"

CT1496

4pc Track Rod End Remover / Installer Set For the quick and easy removal and replacement of the inner steering ball joint without the need to dismantle the steering rack from the bulkhead. Drive Head Range - 30 - 35mm diameter 35 - 40mm diameter . 40 - 45mm diameter

CT3577

Pump Pulley Kit for Power Steering on Ford / GM and Chrysler vehicles with Saginaw / Thompson / Ford C111 and C2 power steering pumps. Fits 1 1/8 . 1 1/4 . 1 5/16 and 1 3/8 Inch pulley hub diameters including 1988 and newer GM cars equipped with Quad 4 engines - 1991 and newer GM minivans with 3.1 Land 3800 V-6 engines - 1991 to current Ford 4.61 engines with a metric shaft. Also includes No 7931 spacer for work on Chrysler Cirrus / Dodge Stratus and Plymouth Breeze.

2pc Bearing Separator Set 50 and 75mm 4 Sets of Hex Push-Puller Legs and Bar-Type Puller Head 125mm Puller Cross-Bar with 160mm Forcing Screw.

Inner Tie Rod Installer / Remover Tool Set For inner tie rods that are inaccessible to adjust with a normal spanner. Sizes 1-3/16, 1-1/4, 1-5/16, 1-7/16 14mm, 17mm and 33.6mm for most applications.

www.cannontools.co.uk


Section 5

Ball Joint Service Tools

CT3895

CT3573

BMW Ball Joint Tool

Mercedes Ball Joint and Bushings Separator

For BMW 3 Series - E36 models. Exchangeable yokes for multi-purpose use. Can also be used for hydro and plastic bushings.

CT2074

CT0551

For the upper and lower ball joints on Mercedes Benz models W220 / W211 / W230. 185mm compression spindle with 24mm Hex Drive 2 Compression heads : 40 and 54mm 3 Pressure pads : 22 / 33 and 57mm Works on press-fit upper and lower ball joints. C- Frame can be used onl universal joints.

Large C-Frame Ball Joint Separator For cars and light trucks with press-fit type ball joints. Separates tie rod ends and compact car ball joints. Powerful lever action breaks loose stubborn joints. Eliminates broken grease reservoirs.

CT1948

CT3574 BMW Ball Joint Remover / Installer For Removal and Installation of Press-Fit Control Arm Ball Joints on BMW 3 Series Vehicles. Use without Removing the Control Arm from the Vehicle. Includes all Necessary Adaptors. Simple / Easy Hydraulic Ram Action.

14pc Ball Joint Adaptor Kit Mercedes Ball Joint Separator This service kit is designed to remove upper and lower ball joints on Mercedes Benz models W220 / W211 / W230. 160mm compression spindle with 24mm Hex Drive Works on press-fit upper and lower ball joints. C- Frame maybe used to install universal joints.

CT3771

Provides all the adaptors for all vehicles that have press-fit type ball joints. Installation Cups, Removal Cups and Receiving Tubes. For servicing universal joints on most cars vans and light trucks.

CT1949

CT3769 VAG Ball Joint Tool

21pc Ball Joint Service Kit

For removing and installing the upper front ball joint in-situ without the need to disassemble. Features a variety of adaptors used in different combinations for extracting and installing. Applicable to VW T4 2000 CC, T4 2500 CC.

10pc Mercedes Ball Joint Separator Tool Kit

CT1947

for Mercedes Benz ML3650 | S500 | E320 | E500 With forged carbon steel C-frame Press. Front and Rear suspension ball joint press adaptors and 3/4â&#x20AC;?Dr 4 prong Ball joint socket

Ball Joint Service Kit with 4 Wheel Drive Adaptors This tool kit is designed for use on all cars and light trucks that have press-fit type ball joints without the need to remove the control arm from the vehicle. C-Frame and Forcing Screw. Installation Adaptor Removal Adaptor. Installation Cups. Removal Cups Receiving Tubes

NEILSEN

Distributed by Cannon Tools Limited

With 4 Wheel Drive Adaptors. Brake Anchor Pin Removal and Installation. For vehicles with press-fit type ball joints used in-situ without the need to remove the control arm. C-Frame and Forcing Screw. Installation Adaptor Removal Adapto. Installation Cups. Removal Cups.Receiving Tubes. For universal joints on most cars, vans and light trucks.

CT3612

CT0566 10 Ton Hydraulic Ram

Ram Length : 270mm Width : 38mm Tommy bar length : 119mm Thread pitch of ram : M12 x 1.75 For use with CT3612 

2-way Hydraulic Ball Joint Separator Kit Also for Track Rod Ends and Anti-Roll Bar Mountings. Jaw Opening : 30mm | 34mm | 40 mm. 12 tonne Hydraulic Ram. Thrust Screw Lengths : 80 | 100mm. Pivot Rod Length : 125 mm.


Bearing & Gear Pullers CT3255

CT0391

Section 5

CT1509 6 Way Gear Puller Multi-Purpose Hydraulic

3 Jaw Gear Puller 8 inch / 200mm Reversible Legs

2 and 3 Leg Configuration. Up to 10 ton Capacity.

3pc Bearing Puller Set Sizes : 3, 4, 6” / 75, 100, 150mm CT1511

CT3920

CT3016

Heavy Duty Pulley Puller For pressed-on groove pulleys. For Alternators and Power Steering Pumps also Alternator Bearings. Adjustable Jaw Tension

Universal Puller Set 2 Leg / 3 Sizes Variable Width Legs - 100 / 200 / 250mm Long Chrome Molybdenum

CT3375 Gear Puller Set

CT3247

with 2 and 3 Leg variations Legs 3”, 4”, 6”, 8” Long / Legs 75, 100, 150, 200mm.

23pc Hydraulic Puller Kit

CT4143

Universal 3 Arm Puller Set

Ratchet to hold Legs in place in-use.

2 Leg Sliding Bar. 3 Leg Sliding Bar Arms - 100 / 200 / 250mm x 3 Spindles - 160 / 270mm Long.

5 Ton Gear Puller

CT0555

2 and 3 Way with Ratchet Action Legs for One Man Operation Capacity : 5in.- 8in. / 125 - 200mm

Heavy Duty Set for removing Gears, Bearings and Sprockets

CT1498

CT4144 5 Ton Gear Puller Set 9pc Mini Bearing Separator Set Compact set containing Bearing Separator and 2 Leg Puller Suitable for removing small gears wheels and shaft fittings. Separator : 15 - 58mm Puller Jaw : 50mm

As above with Short and Long Legs

2 and 3 Way Legs now with Ratchet Action Leg Sizes : 100 - 125mm / 125 - 200mm

14pc Bearing Splitter & Gear Puller Set Bearing Seperator with 150mm Push Rod

www.cannontools.co.uk


Section 5

Hub & Wheel Bearing Service Tools

CT3257

CT3396

7pc 1/2”Dr Wheel Bearing Socket Set For Wheel Bearing Lock Nuts. Sizes : 2-3/8”, 2-1/2” and 55mm Sockets 2-1/2”, 2-3/4”, 2-9/16” and 2-3/8” rounded lock nuts.

CT3510

CT3619

Hydraulic Wheel Hub Puller - 10 Ton Hydraulic Ram with 10 ton capacity used to press the axle shaft from the hub. For 4 or 5 bolt hubs with the centre line of the bolts mounted in a 96-125mm diameter circle. Applicable to Audi, Citroen, Fiat, Opel, Peugeot, Renault, Seat, Skoda, Volvo, VW. CT0566

Universal Wheel Hub Puller 3 adjustable arms make wheel hub removal easy and damage free. 200mm puller screw with striking wrench. Designed for use on most makes and models of vehicle. Will not distort wheel lugs.

CT3776

10 Ton Hydraulic Ram

Ram Length : 270mm Width : 38mm Tommy bar length : 119mm Thread pitch of ram : M12 x 1.75 For use with CT0556 or CT3396 above.

CT3385 Wheel Bearing Lock Nut Wrench Adjustable jaws with locking feature to suit both hexagon and octagon wheel bearing lock nuts. Includes three sets of pins to suit lock nuts with pin holes. Capacity 6 point lock nuts 49 - 135mm. 8 point lock nuts 49 - 143mm. Pin diameters 6mm / 8mm / 10mm.

Hydraulic Wheel Hub Puller Universal hub puller kit with hydraulic ram giving up to 12 tons of pressure with a large slide hammer assembly. Suitable for most 3, 4, 5 and 6 holed hubs. Ideal for use on GM, VAG, Peugeot, Citroen, Renault, Ford and Volvo.

CT0556

CT3245

Wheel Hub & Ball Joint Puller

16pc Bearing Extractor Set

Hydraulic Wheel Hub Puller Set and Ball Joint Removal Tool Max : 10 Ton rated Ram Length : 270mm x 38mm Tommy bar length : 119mm Weight : 2kg

With Puller and Slide-Hammer Screw Adaptors - M6 x 1.0 / M8 x 1.25 / M10 x 1.5 Collets - 8 - 11mm, 12 - 17mm, 18 - 23mm, 24 - 29mm, 30 - 34mm, 34 - 38mm, 39 - 43mm, 44 - 48mm, 49 - 53mm / 54 - 58mm

CT3368

5pc Bearing Puller Set 3pc Rear Axle Bearing Puller Set

NEILSEN

Distributed by Cannon Tools Limited

Bearing extractor collets with internal capacity from 11 to 32mm. Collets - 11 - 16mm, 15 - 19mm, 18 - 25mm, 26 - 32mm. 377mm / 0.85kg Slide Hammer.


Hub & Wheel Bearing Service Tools CT3571

CT3897

5pc Wheel Bearing Puller Set

Ford Transit Rear Hub Puller

Internal and External 3-Jaw Pullers External puller 15mm - 80mm Small Internal puller 15mm - 30mm Large Internal puller 30mm - 80mm Slide Hammer to aid pulling out the bearing.

Specifically designed for removal of the Rear Hub on FWD Ford Transits. The bearings on these Transits often seize in place requiring this special tool for removal of the hub. Applicable to - Ford Transit 2000 onwards

Section 5

CT1002

CT1054

30 ton Hydraulic Shop Press Floor Standing Heavy Duty H-Frame Ideal for Straightening / Bending and Stamping

CT2594

16pc Professional Slide Hammer / Puller Set Combination Puller with 5lb Malleable Steel Slide Hammer Drop Forged Steel Pullers and Attachments Fully Hardened Shaft and Accessories. Converts in to a 2 or 3 Jaw Internal / External Puller

CT3513

CT2573

Hydraulic Press Support Block Wheel Hub & Drive Shaft Puller 4.3kg slide hammer for wheel hubs, front-wheel drive shafts and brake drums. Suitable for VW, Audi, Alfa Romeo, Ford, Citroen, BMW, Mazda, FIAT, Mercedes-Benz, Seat, Opel, Peugeot, Renault, Skoda, Porsche etc. Bolt Size : M12 x 1.5, M14 x 1.5.

for use with a workshop press. Level 3 point contact guarantees a perfect and safe support. Variable arrangement accommodates most bearings on a wide variety of suspension arms. Length : 2750mm Width : 210mm.

50 ton Hydraulic Shop Press Floor Standing Heavy Duty H-Frame Ideal for Straightening / Bending and Stamping

www.cannontools.co.uk


Section 5

Bearing & Bushings Service Tools

CT2934-1

CT3187

M10 Pulling Spindle Spare for CT2934 or CT3187

26pc Universal Press and Pull Sleeve Kit CT2934-2 M12 Pulling Spindle Spare for CT2934 or CT3187

For the removal and installation of bushings / bearings and seals etc. Fully universal applications on both cars and LCVs. Contents - 22 x Press Sleeves. Inside Diameter from 34-80mm in 2mm steps. Outside Diameter from 44-90mm in 2mm steps. 4 x Pulling Spindles with nuts and thrust bearings, Sizes : M10, M12, M14, M16.

CT2934

CT2107

CT2934-3 M14 Pulling Spindle Spare for CT2934 or CT3187

Bearing Service Tool Kit for Front Wheel Drive Vehicles

Universal Press and Pull Sleeve Kit

CT2934-4 M16 Pulling Spindle Spare for CT2934 or CT3187

CT2071

For the removal and installation of bushings, bearings and seals etc. Fully universal applications on both cars and LCVs. Contents - 22 x Press Sleeves. Inside Diameter from 34-80mm in 2mm steps. Outside Diameter from 44-90mm in 2mm steps. 5 x Pulling Spindles with nuts and thrust bearings. Sizes : M10, M12, M14, M16, M18.

CT3877

CT2934-5 M18 Pulling Spindle Spare for CT2934 or CT3187

NEILSEN

Distributed by Cannon Tools Limited

25pc Front Wheel Bearing Service Kit

Wheel Bearing Removal Tool Set

Front wheel drive vehicles 60mm to 85mm. Reduces chances of damage to hub and bearing. Heavy duty steel drifts. For use with impact tools. Also suitable for industrial bearings.

For the Removal and Installation of Wheel Bearings on Front Wheel Drive Vehicles. Heavy Duty Drive Screw for use with Impact Tools. Reduces Chances of Damage to Hub and Bearings


Bearing & Bushings Service Tools

Section 5

CT3399

CT3400

CT3401

Wheel Bearing Tool Set - Audi / VW Audi - A3 / A4 / A4 Quattro / A6 / A8 / TT VW - Polo / Golf / Passat / Sharan / T4 Minimum effort for saving time. Clamping nut. Pull spindle. Bearing cover. Housing. Adaptor ring. Centring Rings : 34, 35, 37, 39, 40, 70, 75, 80mm Pressure Rings : 65, 66, 67, 70, 72, 74, 75, 76, 78, 79, 80, 81, 82, 83, 85mm Retainer adaptors for clamping nut pressure spindle with O-ring and mechanical spindle. For the safe - quick and professional way to remove and replace wheel bearings.

Wheel Bearing Tool Set - Mercedes A-Class / B-Class / C-Class / E-Class / M-Class / V-Class . 190 series . W124. Minimum effort for saving time. Clamping nut. Pull spindle. Bearing cover. Housing. Adaptor Ring. Centring Rings : 42, 45, 49, 50, 54, 60, 80mm. Pressure Rings : 66, 70, 73, 75, 79, 83, 84, 85, 87, 88, 90, 93mm. Retainer adaptors for clamping nut pressure spindle with O-ring and mechanical spindle. For the safe - quick and professional way to remove and replace wheel bearings.

Citroen / Peugeo / Renault Minimum effort for saving time Clamping nut. Pull spindle. Bearing cover. Housing Adaptor Ring. Centring Rings - 35, 3, 42, 45, 60, 75mm. Pressure Rings - 65, 72, 82, 83mm. Retainer adaptors for clamping nut - pressure spindle with O-ring and mechanical spindle. For the safe - quick and professional way to remove and replace wheel bearings.

CT3572

CT3503

CT2289

Wheel Bearing Tool Set

19pc Wheel Hub and Bearing Service Kit

Wheel Bearing & Seal Installation Kit New lightweight design for the installation of bearings without damaging the bearing or housing. Contains 3 metal bearing drift sleeves and 34 nylon drifts with Deadblow Hammer. Can also be used to install oil seals. Fits most sizes of bearing and seals found on modern vehicles. Drift Sleeve Diameters - 25, 40, 60mm. Drift Sleeve Length - 220mm. Nylon Drift Sizes - 26, 28, 30, 32 x 2, 35 x3, 37, 40, 42 x2, 47 x3, 52 x2, 55, 60, 62 x 3, 68, 72 x2, 75, 80 x 2, 82, 85, 90 x 2, 100, 110mm.

Designed for fitting and removing modern (GEN2) Wheel Hub Bearing Units where the Hub and Bearing are a combined unit. Designed for removal and installation without the need to dismantle the steering assembly. Maybe used in conjunction with a workshop press. Heavy Duty Steel Drifts : 62, 66, 72mm Pulling Spindle with nuts and thrust bearings - M18 62mm - Audi A2, VW Lupo 66mm - Skoda Fabia, VW Fox, Polo. 72mm - Audi A2 2000Seat / Ibiza / Cordoba 2002 Skoda Fabia / Roomster 2000VW Polo 2002- / VW Fox 2005-

17pc Master Front Wheel Drive Bearing Service Kit For the removal and installation of front hub bearings without the need to dismantle the steering assembly. May be used with an Impact Wrench. Heavy Duty Steel Drifts: 55.5, 59, 62, 65, 66, 71.5, 73, 78, 84, 86, 91mm. Hub Screws - M12 x 1.5 and M14 x 1.5mm. Suitable for most front wheel drive cars and vans

www.cannontools.co.uk


Section 5

Bearing, Bushings & Seal Service Tools

CT3777

CT3948

51pc Bearing, Bushing & Seal Master Driver Set

21pc Wheel Bearing & Seal Installation Kit Suitable for mounting bearings and sealing rings. Particularly useful when used with a hydraulic press. Kit includes 17 mounting pads 70 to 150mm diameter in 5mm steps. 273mm handle for use with a hammer.

Suitable for mounting bearings, bushings and sealing rings. 220mm knurled handle grip for use with a hammer. Particularly useful when used with a hydraulic press. Support Disc - 74mm, bore 12.2mm, height 15.2mm. 48 Discs 18 to 65mm Diameter in 1mm increments. Discs 12.2mm high and 12.2mm bore.

CT3872

CT4275

CT3952

Wheel Hub & Bearing Service Kit Wheel Bearing Hub Removal and Repair for Rear Wheel Drive Mercedes, Porsche and BMW. Front Wheel Drive VAG and Asian vehicles. The Best Kit around for rear wheel hub and bearing servicing on German vehicles.

CT3582

66mm VAG Wheel Hub Bearing Unit Tool

62mm VAG Wheel Hub Bearing Unit Tool For removing and installing the compact wheel bearing / combined wheel hub and bearing unit on VAG vehicles

CT3763

72mm VAG Wheel Hub Bearing Unit Tool

For removing and installing the compact wheel bearing, combined wheel hub and bearing unit on VAG vehicles. Applicable to Skoda Fabia VW Fox / Front | Polo. With Pressure plate with 8 holes and 5 bolts. Divided dismantling shells and Dismantling plate. Divided mounting shells and Mounting plate.

Compact Wheel Bearing Set for Audi / VW For removing and installing the compact wheel bearing / combined wheel hub and bearing unit on VW Polo Fox etc. High strength spindle and components suitable for direct use on vehicle while in-situ.

CT3873

CT3874

78mm Wheel Hub Bearing Tool

82mm Wheel Hub Bearing Tool

85mm VAG Front Wheel Bearing Tools For removing and installing the compact wheel bearings on combined wheel hub and bearing units found on VW Polo and Fox models. Can be used on the vehicle while in-situ.

For assembly and disassembly of front wheel hub bearing units on Ford, Mazda and Volvo vehicles

CT4277

62 / 66 / 72 / 85mm VAG Wheel Hub Bearing Tool Master set containing all the parts found in the sets above 62mm CT3872 / 66mm CT4275 / 72mm CT3582 / 85mm CT4277

NEILSEN

Distributed by Cannon Tools Limited

For assembly and disassembly of front wheel hub bearing units on Ford, Land Rover and Volvo vehicles

Check out the Website for full product specifications and up-dates to information on these specialised kits.


Drive Chain & Seal Service Tools CT4276

CT3253

Section 5

CT2758

Universal Bearing Packer Evenly injects fresh grease while forcing out old grease

CT3915

90mm Audi Wheel Hub Bearing Tool Kit For use with workshop hydraulic press Facilitates assembly and disassembly of front wheel hubs Applicable to Audi models: A4 / S4 Quattro Avant 2001 - 2008 A6 / S6 Quattro Avant 2002 - 2005 A8 / S3 Quattro Avant 2004 - 2007 R8 since 2007 Contents : Pressure Plate and Push Pins Disassembly shells Disassembly pressure piece Mounting sleeve

7pc Bearing Race & Seal Driver Set CT1243

Adjustable Seal Puller 2 hook shapes with rotating head for removing various oil and grease seals

CT2247 CT3684

11pc Bearing and Seal Driver Set

Chain Breaker and Riveting Tool For Breaking and Joining most Drive Chains from 35 to 630. Pins 2.2mm. 2.9mm. 3.8mm. Pin Guides 2.2mm Upper / 2.2mm Lower and Riveter Pin. Anvil 3mm and 6mm. Spring Press Plate. Lever Handle Chain Press

For the Installation of Bearings and Seals. Helps avoid damage to bearing and seal faces. Drive Flanges - 39.5, 44, 50, 59, 63, 65, 72, 76, 81mm Aluminium Mandrel Driver and flanges.

CT3960

CT3508

CT2248

Chain Breaker and Riveting Tool Heavy Duty For Breaking / Pressing and Riveting Motorcycle Drive Chains - 520. 525. 530. 532. Tool can be secured using a vice or spanner. 3. 4. 5mm Pinss

3pc Seal Puller Set Suitable for the safe damage free removal of Drive or Transmission Oil and Grease seals or O-rings. Tool head shape provides better access than other seal pullers.

Master Bearing Race and Seal Driver

6pc Hose Pick & Seal Remover Set

Aluminium all in one self contained precision driver with rotating handle and expanding jaws to seat bearing races, or seals with ease. Variable Jaws cover a range of 18.5 - 89mm or 0.72 - 3.50â&#x20AC;?.

Easily remove seals or 0-rings or pick soft hoses on the vehicle. Tools have different lengths and angle to fit a wide range of applications. Angled blade is ideal for removing seals in a confined space.

www.cannontools.co.uk


Section 5

Bearing & Bushings Service Tools

CT2368

CT3418

Bearing and Bushing Isolator Driver Set

BMW / Mercedes Bushing Service Kit For removing and installing steering and suspension Bushing Isolator. Applicable to BMW vehicles : E31- E66 and Mercedes Benz : W220 / W211 / W203

CT3875

CT2284

BMW X5 Rear Sub-Frame Bushings Tool Kit For servicung the rear axle carrier bushings on BMW ESS X5 / 99-07. Used in-situ without removing the rear sub-frame assembly from the vehicle.

CT2909

GM Bushing Service Kit Rear Suspension Bushing Isolator Removal Tool for Opel, Vauxhall. For Upper and Lower suspension bushings

CT3515

Ford Mondeo Bushing Service Kit Rear Sub Frame Bushing Isolator Kit

CT3514

Ford Bushing Service Kit For servicing the rear mounted Bushing Isolators. Can be used in-situ without removing the rear Sub-frame from vehicle. Applicable to Ford Mondeo 2001 onwards.

CT3575

Ford Bushing Service Kit

CT3576

For rear mounted Bushing Isolators. Can be used in-situ without removing the trailing link assembly on Ford Ka and Fiesta

BMW Bushing Service Kit For servicing Screw Pivot Bushing Isolators. Applicable to BMW vehicles : E31, E32, E34, E38, E39, E53, E60, E65, E66

CT3894

Mercedes Bushing Service Kit

CT0587

For removing and installing Screw Pivot Bushing Isolator. Applicable to Mercedes Benz W220 / W211 / W203

Ford Rear Bushing Service Kit

BMW Bushing Service Kit

For servicing Ford Focus Mk1 No need to remove sub-frame from vehicle.

CT0501

For servicing the Rear Axle Bushings. Applicable to : BMW E38 - E70 vehicles

CT2937 CT3516

BMW Bushing Service Kit

VW / Polo Bushing Service Kit

For servicing the front steering arm Bushing Isolators on BMW Mini - One, Cooper and Cooper S 2001 onwards. R50, R53 Chassis W10/W11/W17

For the removal, installation of the front Bushing Isolators on VW vehicles. Can be used in-situ without removing assembly from vehicle. Applicable to VW Polo (9N)

NEILSEN

Distributed by Cannon Tools Limited

VAG Bushing Service Tool For replacing the front suspension bushings on VW Polo 2002 and later.


Bearing, Bushings & Suspension Service Tools CT3517

Section 5

CT3760

CT3876

Rear Sub-Frame Bushing Tool Kit - Renault Laguna II

BMW Rear Differential Tool Kit

Remove and install front mounted bushings on the rear subframe. Can be used in-situ no need to remove the sub-frame from the vehicle.

For removing or installing the rubber mounted ball joint in the rear axle trailing arm without removing the rear carrier assembly. Suitable for use on various BMW models i.e: BMW from E31 to E86 and Mini.

VAG Bushing Service Kit For servicing the rear mounted Bushing Isolators of the front lower wishbone. Used in-situ without removing the aluminium housing. Applicable to Seat, Skoda and VW vehicles. Use with a 24mm Spanner.

CT2910 CT0502

CT3597

VAG Bushing Service Tool Audi / VW Rear Suspension Tool For replacing the rear axle mounted bushings. Use in-situ without the need to remove the axle assembly. Allows the bushings to be fitted without damaging vehicle.

BMW Camber Adjustment Tools

VAG Bushing Service Kit Suitable for the Bushing Isolators on Audi / VW vehicles.

CT3675

CT2566

This tool set is designed to precisely adjust the camber of many late model BMW vehicles by positively locating the top of the strut unit while the locating bolts are loose. This is particularly important when using a BMW KDS type alignment system.

5pc Strut Nut Tool Set

CT4014

Use with a 22mm Spanner or Socket. Sizes - 10.5 x 3.5, 12.5 x 3.5, 14 x 2.5, 14.5 x 3, 14.5 x 5 For Macpherson front and rear struts. For holding the damper shaft during the removal.

2pc Strut Leg Pry Socket Set

CT3755

Unique shape bits 1/2â&#x20AC;?Dr 7 x 5mm, 8.2 x 5.5mm Reduces risk of damage to hub casting. Applicable to Ford, Peugeot, Renault, VAG.

Wishbone Suspension Arm Lever Axle Backlash Tester For localising the source of common faults around the wheel axle. Suitable for testing under load conditions on cars up to 3.5 Tons. Applications Wheel Bearings, Dome Bearings, Silent Bearings, Carrier Joint, Track Rod End, Coupling Rod, Axle Joint, Steering Rack and Stabilisers.

For pushing down the wishbone and other suspension parts during the servicing of the drive shaft or during the replacement of wheel bearings. Total length - 1180mm with Comfortable rubber grip. Sliding adjustment for easy positioning. Adjustable canter lever hook.

CT0538

Suspension Turnbuckle Service Kit for servicing spring or strut shock absorbers in conjunction with spring compressors. Strut Nuts with 22mm hex drive. Specialist bits with 10mm hex drive.

www.cannontools.co.uk


Section 5

Suspension Service Tools

CT3233

CT3692

CT0917

Coil Spring Compressor 370mm Capacity Coil Spring Compressor

Coil Spring Compressor

For use On or Off the vehicle.

For use with 21mm socket or spanner

CT1792

CT2614

For use on MacPherson Struts. Also allows for repairs on bent struts and strut tubes. Fast and easy set-up and extremely safe to use.

CT2614-1

Replacement Winding Mechanism Professional Coil Spring Compressor Includes 3 Pairs of Jaws for compressing most types of Macpherson Front and Rear Springs. 3 Sets of Jaws Sizes : 65 125mm, 88 160mm, 125 215mm

 for Coil Spring Compressor CT2614

Telescopic Coil Spring Compressor 70 / 130mm Ă&#x2DC; and 90 / 150mm Ă&#x2DC; NOT for use with Impact Drivers !

CT3538

CT3505

CT3611

Universal Coil Spring Compressor

Heavy Duty

Coil Spring Compressor Kit With adjustable safeguard brace that prevents accidental release of spring under load and also enables the tool to operate in parallel. Range : 23mmm - 280mm. Capacity per pair : 1200 kg Max.

Telescopic Coil Spring Compressor with 100 - 185mm diameter capacity. Use with a 28mm Spanner or Impact Socket or Wrench

Angled Jaws for wishbone multi-link suspension. Prevents overload and Improves safety. Suitable for most Citroen, Peugeot, Skoda, VW vehicles.

CT1946

CT1945

Air Powered Hydraulic Coil Spring Compressor Station

Hydraulic Coil Spring Compressor

Hydraulic Coil Spring Compressor Work Station

100mm to 250mm Springs Ram Travel : 340mm. Max Working Length : 590mm. Strut shaft clasp adjusts and will secure the strut during operation

102mm to 160mm Springs 1000kg Max. Force Foot Operated Hydraulic Unit. Plastic Coated Yokes reduce the risk of spring slippage or damage.

102mm to 160mm Springs 1000kg Max. Force Air Actuated Hydraulic Unit with Alternative Foot Operation. Plastic Coated Yokes reduce the risk of spring slippage or damage.

CT1321

CT2879 CT1946-1

Spare Pedal Spare Hydraulic Pump for CT1321 and CT1945

NEILSEN

Distributed by Cannon Tools Limited

for CT1946


CV Joint & Exhuast System Service Tools CT2546

CT2613

Section 5

CT3908

Air powered Boot Installation Tool for CV Joints

CV Joint Boot Clamp Tool For the assembly of Stainless Steel Bands. 3/8”Dr Jaws for use with a Torque Wrench. For torque sensitive rubber boot clamps

CT2997

7pc Drive Shaft Puller Set 230mm Long Puller with 120mm Housing. M16, M20, M22, M24, M2, M30 x 1.5. For BMW, Mercedes, Subaru, WW, Porsche.

CT3384

Composite body with simple control valve. Used for stretching flexible rubber CV boots on automatic drive shaft assemblies. When a CV boot or gaiter is split instead of dismantling the front axle and drive shaft assembly simply use this tool for accurate and time saving labour. The diameter of CV joints should be in the range of 20mm 110mm. Installs flexible steering and CV boots without removing axle. Suitable for cars and small vans. Works from a 1/4in. BSP inlet.

2pc CV Joint Boot Clamp Tool Crimps and flattens ear type clamps. For installing CV banding on CV Joint Boots.

CT3023

CT3909

CV Joint Boot Clamp Pliers

CV Joint Boot Clamp Pliers Propshaft Separator Will fit most makes and models of vehicles / except Seat!

CT2070

The Handles have 3/8”Dr holes in the handle shafts for use with a torque Wrench

For installing Ear Type clamps on fuel filters, CV joint boots and other cooling system hoses.

CT1919

CT1759

3pc Pipe Expander Set

Exhaust Spring Clamp Removal Tool

2pc Exhaust Rubber Ring Tool Set

For VW vehicles

Hooked and 90 degree Flat

CT3017

Works With all 1.1/8” - 3.5” Thin Walls. Small Expander: 1 1/8" to 1 3/4" / 29mm-44mm. Medium Expander: 1 1/2" to 2 1/2" / 38mm-64mm. Large Expander: 2 1/8" to 3 1/2" / 54mm-89mm. Easily Straighten out clamp dents in exhaust pipes.

CT1793 CT0756 Exhaust Pipe Cutter Tube Cutter with Ratchet

Exhaust Pipe Cut-Off Tool with 4 Blades Handle turns to tighten the blades. Four knife blades cut cleanly and track perfectly.

Exhaust Pipe Chain Cutter Fits 19mm to 83mm Ø Cuts Thin and Thick Walled Pipe from 3/4” to 3.25” Gets Into Tight Spots for Easy Cutting.

CT0756-1

Spare Cutting Wheel

www.cannontools.co.uk


Section 5

Lifting Gear

Bottle Jacks CT1720 CT1721 CT1722 CT0011 CT0318

2 6 10 20 30

CT1068

Ton Ton Ton Ton Ton

CT1368

20 Ton Portable Jack Minimum Height - 60mm. Lift Height - 170mm. Work Pressure - 59.1 MPA. Includes 3/8” Quick Connector

CT1471

3.5 Ton Trolley Jack 2 Ton Trolley Jack Lifting Range 135mm - 505mm Heavy Duty with Long Low Profile.

Large steel saddle with heavy duty rubber pad. Built-in bypass system to prevent over extension. Built-in safety valve to help prevent accidental overload. Min. height - 4” / Max. height - 21”

CT0970 CT2336

CT0968

1.5 Ton Trolley Jack

20 Ton Hydraulic Bottle Jack

Capacity : 1.5 Ton. Dual Lifting Pistons. Height : 90 - 358mm. Net Weight : 14.3 kg. Lightweight Steel and Aluminium construction.

CT0008

CT3731

4.5 Ton Fork Lift Trolley Jack 2 part Lifting Range 4 ton = 65 - 406mm. 5 ton = 350 - 710mm. Welded Base and Cylinders. Chromed Pump Piston and Ram for added rust resistance

CT2150 2 Ton Trolley Jack Min. Height. 135mm. Max. Height. 335mm. Heavy Duty Steel Construction. Swivel caster wheels for easy moving

3 Ton Floor Jack Height : 140mm - 520mm. Weight : 36.6kg - 38.2kg. Dimensions : 675 x 346 x 180mm

CT0731 CT1470

3 Ton Trolley Jack Low Profile / Aluminium

22 Ton Trolley Jack 2.25 Ton Trolley Jack Built in By-Pass System. Built in Safety Valve. Extra Long Handle with Rubber Grip.

NEILSEN

Distributed by Cannon Tools Limited

For Industrial Use. 3 Handle Settings. Air Operated : I20 - 180psi. Lifting Range : 228 - 448mm. Ideal for the Workshop and Roadside Use. Handle Has Release Valve for Easy Height Adjustment.


Lifting & Support Equipment CT1061

Section 5

CT0730 12” / 300mm Vehicle Positioning Trolley

48” / 1220mm Farm Jack

with 1500lb Lift Capacity. 4” Nylon Swivel Casters. Heavy Duty Bi-direction Hydraulic Mechanism. Heavy Gauge Steel Construction. Lift your car just enough to move it in any direction. Handles tyres up to 12”/ 300mm wide. Push your car sideways to store it in the perfect position. Effortless mobility - rolls in any direction

CT2422

CT2345

Transmission Jack - 1.0 Ton

2.5 Ton / 120psi Air Jack

Min. Height 200mm. Max. Height 760mm

with 3 Inflatable Bags long handle base Lift Height : 435mm

CT0965

CT1067 3 Ton Axle Stand

CT2421 0.5 Ton Transmission Jack

3 Ton Axle Stands Height : 10”- 16” Aluminium

Supplied with chain for safe loading. Precision valve allows delicate adjustment when taking out gearbox and re-aligning during replacement. 4 swivel castors for manoeuvrability. Min. Height : 850mm. Max. Height : 1750mm. Rated Capacity : 500kg. Weight : 60kg. Dimensions : 780 x 660 x 1000mm

CT0966 6 Ton Axle Stands

www.cannontools.co.uk


Section 5

Ramps & Support Equipment

CT4082

CT1073 Loading Ramps

Low Riose Car Ramps

1500lb Capacity 2 Steel Loading Ramps 1830 x 230mm. Ideal for Quad Bikes, Motor Bikes, and Wheel Chairs.

Size : L700 x W200 x H70mm with 80mm end stop. Capacity : 5000kg per pair Manufacturer from Polypropylene Ideal for low access for trolley jacks.

CT2901 Car Ramps - 1 Ton Capacity per Pair : 1000kg. Length : 940mm. Max Height : 260mm. Max Width : 310mm

CT0820 Folding Aluminium Loading Ramp Single for Road Motorcycles and Dirt Bikes or in pairs for ATVs and other vehicles. Load Capacity : 340kg ( single ramp ) Full Length : 216cm Folded Length : 111cm Width : 28cm Net weight : 6.80kg

CT0808 Folding Aluminium Loading Ramp For 2 wheeled bikes and equipment. Extremely portable and compact. Solid Aluminium construction Load Capacity : 270kg Full Length : 199cm Width : 30cm

C1562

CT1561

Light Duty Motorcycle Lift Jack 1500lb / 680kg Capacity. Rubber Padded Protection. Foot Pedal Operated. Lifting Range 140mm to 410mm

NEILSEN

Distributed by Cannon Tools Limited

Heavy Duty Motorcycle Lift Table Lifting Range 180 to 760mm. Hydraulic Operation - 1 Foot to Lift and the other Foot to Release. Safety Valve to Prevent Overload. Guard Plate above release pedal to prevent unintentional lowering. Set Spindle to prevent unintentional slow lowering.


Winching & Lifting Equipment

Section 5

CT3099

CT0967 2 Ton Hydraulic Engine Hoist Fast folding

230V / 500W Electric Hoist Lifting Capacity - 125kg - 250kg. Lifting Height - 6 - 12M. Lifting Speed - 5 - 10M/min. Cable Length - 12.5M. Cable Diameter 3mm. Cable Break Resistance - 800kg

CT0346 Chain Block Lifting Height : 2.5M Safe working load : 1000kg For general workshop and industrial use. Weight approx : 12.8kg.

CT0347 Chain Block CT2064

Lifting Height : 3M Safe working load : 2000kg For general workshop and industrial use. Weight approx : 13kg.

Chain Sling - 1M 4 Leg / 4 ton Chain Sling. CE Approved

CT0416

CT2065

2000lb Folding Engine Stand

Chain Sling - 2M 4 Leg / 4 ton Chain Sling. CE Approved

N.W : 36kg

CT0514

CT0515

2 Ton Hand Winch Hand Puller with 2 Hooks. Max. Cable Length - 2m. Cable Diameter - 4.5mm

4 Ton Hand Winch Hand Puller with 3 Hooks. Max. Cable Length - 3m. Cable Diameter - 6mm

Heavy duty steel construction with wide base and reinforced steel neck which provides ample strength to eliminate flexing when supporting the engine block. Rear swivel casters provide manoeuvrability. Rotating head provides easy access to any part of the engine.

www.cannontools.co.uk


Section 5

Winching Equipment

CT0319

CT0711

CT0712 12V 2000lb Electric Winch

1200lb Hand Winch with 10M 3/16 inch Cable. Capable of Pulling 500 kg. Drop Forged Galvanised Steel Frame. Steel Safety Latch Hook. Smooth Action Ratchet Handle

12V 1000 - 2000lb Electric Winch

CT0772

CT0713

CT0774 5000lb Winch Rollers

CT0775 12V 5000lb Electric Winch

12V 8000lb Electric Winch

CT0716

CT0714

12V 8000lb Electric Winch

12V 9000lb Electric Winch

CT0773

8000lb Winch Rollers

CT0718

CT3276

24V 9000lb Electric Winch

Winches come with Cable Hand Control and Hooks

CT0393

Polyester Tow, Sling Tree Trunk Protector Size - 3M x 75mm x 4mm. Breaking strength of 12000kg

CT0776 5000lb Installation stand

8000lb Installation stand 9000lb Hydraulic Winch

NEILSEN

CT0777 Distributed by Cannon Tools Limited


Towing Equipment Hitch Pins

CT2227 Linch Pins 50pc Assorted sizes

CT3905

Section 5 Linch Pins

CT2022

7/8”

CT0443

6mm

CT2023

3/4”

CT0444

8mm

CT2024

1”

CT0445

10mm

CT2025

11/8”

CT3402

CT3123

48mm Jockey Wheel Clamp

Tow Ball Lock

CT3862

CT0799

Blocks the Tow Ball holes to prevent theft by towing For Trailers, Caravans, Horse Boxes etc

Universal Coupling Lock 110 x 110mm with 70mm Disc Type Padlock. Heavy Duty Construction supplied with 2 keys.

4M Breakaway Cable

CT2001 Tow Ball ATV Tow Ball 2 “/ 50mm x 7/8" x 62mm 3500lb capacity

CT3397 Jockey wheel

PVC Coated Steel Wire 12mm x 4M Capacity : 3.5 Ton

1M Breakaway Cable Activates the brakes on your Caravan or Trailer if it becomes detached from the towing vehicle. Legally required when towing.

CT3011 CT2312 160kgs Jockey Wheel

Magnetic Trailer

Alignment Kit Extends from 15 to 43 inch. Bright coloured balls for easy line-up Simple - Attach 1 to your Trailer and the other to your Tow Ball.

CT4188

CT1558

CT0969

Tow Bar with damper spring 600lb Trailer Dolly

4M Chain with 2 Clevis Hooks

Super Strong Construction. 10” Pneumatic Tyres provide smooth manoeuvrability. 50mm Chrome Hitch Ball

Heavy Duty - 2500lbs working load. Suitable for towing / NOT LIFTING

www.cannontools.co.uk


Section 5

Air Compressors & Fittings

CT3389

CT2894

CT1619

Air Compressor with 5M Air Hose. 30mm Cylinder with water separator. Pressure - 40psi. Voltage - 230 / 50Hz. Air Flow - 20 L/min. 1/4 NPT Connector. 1/8 NPT Air Outlet. 1/800hp, 1700rpm.

CT0496

Air Compressor

Air Compressor

24 Litre Capacity 2.5hp. 230V / 50Hz / 1.8kw / 2.5hp. Noise - 97db Twin Outlet Valve. Wheels and Transport Handle. Thermal Motor Protection Overload. On-Off Pressure Switch. Air Displacement - 266 Litres Per Minute. Max Working Pressure - 8 Bar.

50 Litre Capacity 2.5hp Air Compressor - 230V / 50Hz. 97db Rating. Twin Outlet Valve. Wheels and Transport Handle. Thermal Motor. Protection Overload. On-Off Pressure Switch Air Displacement 262 Litres Per Minute. Max Working Pressure - 8 Bar.

CT1619-3

Belt Driven Air Compressor 50 Litre Capacity Voltage : 230V / 50Hz Power : 1.5kw / 2Hp Speed : 1030rpm Displacement : 171 L/min Max Working Pressure : 115psi / 8 Bar For professional and industrial applications.

CT1619-2

Air Compressor Pressure Control

Air Compressor Cover

Replacement Pressure Adaptor for Air Compressor CT1619

Replacement Plastic Cowl for Air Compressor CT1619

CT1620

CT1621

Air Compressor

Air Compressor

100 Litre Capacity 3hp Air Compressor - 230V / 50Hz. 97db Rating. Twin Outlet Valve. Wheels and Transport Handle. Thermal Motor. Protection Overload. On-Off Pressure Switch. Air Displacement 262 Litres Per Minute. Max Working Pressure - 8 Bar.

200 Litre Capacity 4hp Air Compressor - 230V / 50Hz. 97db Rating. Twin Outlet Valve. Wheels and Transport Handle. Thermal Motor. Protection Overload. On-Off Pressure Switch. Air Displacement 262 Litres Per Minute. Max Working Pressure - 8 Bar.

CT0770

Air Filter Regulator & Lubricator Die-cast control heads and Clear polycarbonate bowls. Large easy-to-read pressure gauge. Filter fitted with automatic drain tap. Supplied with Male to Female adaptors Integral wall bracket. Port Size : 1/2in. BSP

NEILSEN

Distributed by Cannon Tools Limited


Air Lines & Air Powered Tools CT3320

CT0058

CT2307

Nail Gun & Stapler

Flooring Gun

Section 5

Nail Gun & Stapler Lightweight Die Cast Body Adjustable control for Nail Depth. Supplied with Safety Glasses and Oil. with 360 degree adjustable exhaust deflector. One piece drive blade Non-marring Barrel end with Rubber grip. Safe for Touch and Strike Systems.

CT1533

Brad Nails : 18 gauge 20-50mm Staples : 18 gauge 16-40mm / Crown size 5.7mm Operational pressure : 60 - 120psi Air inlet : 1/4” Hose Size : 3/8” Supplied with 100 nails and 100 staples

Air Powered Flooring Gun Uses 12.7mm Crown 1.5” to 2” 15.5 Guage Staples Pressure - 70-100psi / 5.5 - 7 Bar Max Pressure - 120psi / 8.3 Bar Hardened Drive Blade for Longer Life

CT0002

CT1909

Air Hose - 30ft x 3/8”

Air Hose - 30ft x 1/4”

CT0003

CT1910

Air Hose Reel With Rotating Base For 8mm inner diameter air hose Working pressure up to 200 psi All heavy duty steel construction for Industrial / commercial applications. Heavy duty 100 ft air hose included.

CT1056

Air Hose - 50ft x 3/8”

Air Hose - 50ft x 1/4”

Working Pressure 300 psi. Burst Pressure 900 psi 1/4” BSP Brass Fittings

Working Pressure 300 psi. Burst Pressure 900 psi 1/4” BSP Brass Fittings

CT1534

CT1536

Hose Reel

Hose Reel

30ft x 1/2”

30ft x 1”

Hose Reel 30ft x 3/8”

CT0982

CT1535

Hose Reel

Hose Reel

50ft x 3/8”

50ft x 1/2”

Auto-retractable Air Line. Working Pressure -: 300psi. Spring Loaded Auto Rewind

Auto-retractable Air Line. Working Pressure -: 300psi. Spring Loaded Auto Rewind

Auto-retractable Air Line. Working Pressure -: 300psi. Spring Loaded Auto Rewind

www.cannontools.co.uk


Section 5

Air Line Fittings

CT1671

CT1672

CT1673

Female 1/4" bsp 2pc Airline Quick Coupler Set

Female 3/8" bsp 2pc Airline Quick Coupler Set

Female 1/2" bsp 2pc Airline Quick Coupler Set

CT1674

CT1675

CT1676

Male 1/4" bsp 2pc Airline Quick Coupler Set

Male 3/8" bsp 2pc Airline Quick Coupler Set

Male 1/2" bsp 2pc Airline Quick Coupler Set

CT1677

CT1678

CT1679

1/4" bsp / Hose Barb 2pc Airline Quick Coupler Set

3/8" bsp / Hose Barb 2pc Airline Quick Coupler Set

1/2" bsp / Hose Barb 2pc Airline Quick Coupler Set

CT1680

CT1681

CT1682

Female 1/4" bsp 2pc Airline Bayonet Fitting Set

Female 3/8" bsp 2pc Airline Bayonet Fitting Set

Female 1/2" bsp 2pc Airline Bayonet Fitting Set

CT1683

CT1684

CT1685

Male 1/4" bsp 2pc Airline Bayonet Fitting Set

Male 3/8" bsp 2pc Airline Bayonet Fitting Set

Male 1/2" bsp 2pc Airline Bayonet Fitting Set

CT1686

CT1687

CT1688

1/4" bsp / Hose Barb 2pc Airline Bayonet Fitting Set

3/8" bsp / Hose Barb 2pc Airline Bayonet Fitting Set

1/2" bsp / Hose Barb 2pc Airline Bayonet Fitting Set

CT2380

CT2887

5pc Brass Air Quick Coupler Set

NEILSEN

Distributed by Cannon Tools Limited

12pc Air-line Quick Coupling Set Air-line Bayonet Fittings : Male 1/4 in. bsp. Air-line Bayonet Fittings : Female 1/4 in. bsp. Air-line Quick Coupler : Male 1/4 in. bsp. Air-line Quick Coupler : Female 1/4 in. bsp. Air-line Quick Coupler : Male 3/8 in. bsp. Air-line Quick Coupler : Female 3/8 in. bsp


Air Line Equipment CT3269

CT4051

Section 5

CT4246

Air Blow Gun,

Air Screwdriver for 1/4" Hex Bits

Length 110 mm miniature finish adjustable blow with clip-holder tip outer diameter is 5.3 mm

Suitable for heavy prolonged use. Freespeed : 12000rpm Air pressure : 90psi Torque : 40Nm Air inlet size: 1/4”

Air Blow Guns

20pc Air Tool Accessory Kit

CT1760

4” / 100mm

CT1761

13” / 330mm

CT1762

20” / 500mm

Highly efficient pneumatic motor with low air consumption and high torque output.

CT4247

2 x Quick Coupler. 4 x Male Plugs. Double Female Connector. Air Blow Gun. Blow Gun Nozzle. Needle Inflator. Air Gauge. 2 x Female Plugs. Double Male Connector. Tapered Seal Tape. Tapered Nozzle. Blow Gun Adaptor. Dual Head Tyre Chuck. 25ft Coiled Hose

CT0804

CT3268

Air Screwdriver for 1/4" Hex Bits Suitable for heavy prolonged use. Freespeed : 12000rpm Air pressure : 90psi Torque : 40Nm Air inlet size: 1/4” Highly efficient pneumatic motor with low air consumption and high torque output.

6pc Blow Gun Kit

CT4162 CT2832

17pc Air Tool Accessory Kit Air Blow Gun. Tyre Chuck. Pencil Gauge. 4 x 1/4 Male Plugs. 2 x 1/4 Female plugs. 2 x Double Male Connectors. Double Female Connector. 1/4 Quick Coupler. Blow Gun Adaptor. Safety Nozzle. Tapered Inflator. Needle inflator

CT2309

Magnetic Air Tool Holder Holds Air Impact Wrench Wheel Nut Sockets and Torque Wrench 2 Strong Magnets supports up to 15kg

Blow Gun / Air Duster Nozzle length- 3” / 75mm Pressure: 0.8Mpa. Use Pressure: 0.2 - 0.4Mpa. For use cleaning dust and metal granules. Die cast aluminium gun with pistol grip design. 1/4 BSP fitting

CT0929 CT1775

Air Tool Display Stand Heavy Duty Professional Air-line Gauge Gauge with PSI | BAR | KPA scales Range : 0-160psi | 0-11bar | 0-1100 kpa Extruded Aluminium Body with Zinc Head 350mm Steel Sprung Rubber Air Hose Fitted with twin push-on air connetctor

Display Stand for Air Tools

Tyre Inflator with pistol grip Range 0-10 Bar / 140psi. Inlet Size 1/4” BSP. 12” Long Hose. Rubber Protected 50mm Dial Gauge

Check out the Website for full product information www.cannontools.co.uk


Section 5

Air Tools - Impact Wrenches

CT2277

CT1079

Air Impact Wrench - 3/8"Dr

Air Impact Wrench - 3/8"Dr

Clutch Type : Twin Hammer Max Torque : 280 ft-lb Free Speed : 10000 rpm Air Consumption : 26 SCFM Weight : 1.2 Kg Length : 165 mm Air Inlet : 1/4” Hose Size : 3/8”

Max Torque : 120 ft-lb Free Speed : 9000 rpm Air Consumption : 3 CFM Air Inlet : 1/4 Composite Body

CT0672 CT2275

Air Impact Wrench - 1/2"Dr

Air Impact Wrench - 1/2"Dr Composite Body Clutch Type : Twin Hammer Max Torque : 950 ft-lb Free Speed : 7000 rpm Air Consumption : 32 SCFM Weight : 1.98 Kg Length : 198 mm Air Inlet : 1/4” Hose Size : 3/8”

Max Torque : 230 ft-lb Free Speed : 7000 rpm Air Consumption : 5 CFM Max Air Pressure : 90psi Air Inlet : 1/4

CT3950 CT3990

Air Impact Wrench - 1/2"Dr

Air Impact Wrench - 1/2"Dr

MINI Composite Body Max Torque : 500 ft-lb, 678Nm Free Speed : 9500 rpm Air Consumption : 4.7CFM Weight : 1.16 kg Length : 112 mm Air Inlet : 1/4” Hose Size : 3/8” % Powerful with Small Body

Clutch Type : Twin Hammer Max Torque : 950 ft-lb / 1288 Nm Free Speed : 7000 rpm Air Pressure : 90 psi Air Con. : 9.5 SCFM Weight : 2.2 kg Length : 170 mm Air Inlet : 1/4”

CT2276

CT1080

Air Impact Wrench - 3/4"Dr Clutch Type : Twin Hammer Max Torque : 1000 ft-lb Free Speed : 7000 rpm Air Consumption : 32 SCFM Weight : 2.1 Kg Length : 205 mm Air Inlet : 1/4” Hose Size : 3/8”

CT0673

CT3991 Air Impact Wrench - 3/4"Dr Clutch Type : Twin Hammer Max Torque : 1050 ft-lb / 1420 Nm Free Speed : 7000 rpm Noise : 92.88/103.88 dBA Air Pressure : 90 psi Air Con. : 9.5 SCFM Weight : 2.3 kg Length : 174 mm Air Inlet : 1/4”

NEILSEN

Air Impact Wrench - 1/2"Dr Heavy Duty Max Torque : 400 ft-lb Free Speed : 7000 rpm Air Consumption : 8 CFM Air Inlet : 1/4

Distributed by Cannon Tools Limited

Air Impact Wrench - 3/4"Dr Max Torque : 500 ft-lb Free Speed : 4500 rpm Air Consumption : 6 CFM Air Inlet : 1/4


Air Tools - Air Ratchets / Impact Wrenches & Kits CT1082

CT1081

Air Ratchet - 1/4"Dr

Air Butterfly Impact Wrench - 3/8"Dr

Max Torque : 25 ft-lb Free Speed : 150 rpm Air Consumption : 4 CFM Air Inlet : 1/4”

Max Torque : 120 ft-lb Free Speed : 9000 rpm Air Consumption : 3 CFM Air Inlet : 1/4

CT0675

CT0870

Air Ratchet - 3/8"Dr

Air Tool Kit - 14pc

Max Torque : 45 ft-lb Free Speed : 150 rpm Air Consumption : 4 CFM Air Inlet : 1/4”

CT2282

Section 5

Ratchet, Impact Gun & Sockets 1/2”Dr Impact Wrench & Sockets 9, 10, 11, 13, 14, 17, 19mm 3/8”Dr Ratchet 3/8” to 1/2” Adaptor Mini Oiler, Hex Key and Nipple

Air Ratchet - 3/8"Dr Torque : 30 ft-lb Free Speed : 280 rpm Length : 210 mm Air Inlet : 1/4” Hose Size : 3/8”

CT2283 Air Ratchet - 1/2"Dr Torque : 60 ft-lb Free Speed : 180 rpm Length : 275 mm Air Inlet : 1/4” Hose Size : 3/8”

CT0680 1/2"Dr Air Impact Wrench Kit Max Torque : 230 ft-lb Free Speed : 7000 rpm Air Inlet : 1/4 Max Air Pressure : 90psi Sockets : 9, 10, 11, 12, 14, 17, 19,22, 24, 27mm

CT3941 Air Impact Wrench Kit Super Mini - 1/2"Dr Sockets : 14, 15, 16,17, 19, 21, 22, 24mm with 75mm Extension Bar

CT0674 Air Ratchet - 1/2"Dr Max Torque : 45 ft-lb Free Speed : 150 rpm Air Consumption : 4 CFM Air Inlet : 1/4”

CT1091

CT0878

Air Tool Kit - 33pc 1/2"Dr

Air Impact Wrench - 1"Dr Heavy Duty + 38 and 41mm Air Impact Sockets Capacity Bolt Size : 1-3/4in.(45mm) Max. Torque : 1400ft-lb / 1900Nm Free Speed : 3500rpm Air Inlet : 1/2” Air Consumption : 40CFM Air Compressor : 5.0hp

Air Impact Wrench - 1/2”Dr Air Ratchet - 1/2”Dr Air Die Grinder - 1/4” Air Hammer - 150mm 3 Chisels - 5” 5 Grinding Stones 1/4” Quick Coupler Sockets : 9, 10, 11, 13, 14, 17, 19, 22, 24, 27mm

www.cannontools.co.uk


Section 5

Air Tools - Drills, Grinders, Sanders

CT0679

CT1086

Air Drill - 3/8" Chuck

Air Drill - 3/8" keyless Chuck

Drilling caps : 3/8" (10mm) Air consumption : 6CFM Free speed : 1800rpm Air inlet : 1/4” Hose Size : 3/8”

Air consumption : 6CFM Free speed : 1800rpm Air inlet : 1/4” Hose Size : 3/8”

CT0676 CT1087

Air Hammer - 150mm with Chisels

Air Drill - 1/2" keyless Chuck Drilling caps : 1/2" (13mm) Air consumption : 8CFM Free speed : 400rpm Air inlet : 1/4” Hose Size : 3/8”

4500 Blows per minute Air Consumption : 4 scfm Air Pressure : 90 psi Stroke : 1-5/8” Length : 5-½” Air inlet : 1/4” Hose : 3/8”

CT1085 Air Die Grinder - 1/4" / 6mm

CT0698

Air consumption : 3 CFM Free Speed : 2000rpm Air inlet : 1/4” Hose Size : 3/8”

15pc Air Die Grinder Kit

CT1084 Air Die Grinder - 1/4" / 6mm

90 degree Air consumption - 3cfm Free Speed - 2000rpm 2-collet hand wrench Air inlet : 1/4” Hose Size : 3/8” 1/8” and 1/4”shank mounted grinding stones

Free Speed : 2200rpm Air inlet : 1/4” Hose Size : 3/8”

CT1092

15pc Air Die Grinder Kit

CT2279 Air Die Grinder - 1/4" with Composite Body Collet Size : 1/4” / 6mm Free Speed : 22000 rpm Air Consumption : 21 SCFM Weight : 0.69 Kg Length : 190 mm Air Inlet : 1/4” Hose Size : 1/4”

Air consumption - 5cfm Max air pressure - 90 psi No load speed - 2200rpm 2 collet wrenches Air inlet : 1/4” Hose Size : 3/8” 1/8” and 1/4”shank mounted grinding stones

CT3073 CT1083 4" / 100mm Air Angle Grinder

Air Micro Grinder Kit 1.5M Air Hose with protective sleeve. 85 - 115psi / 5.8 - 8.0 bar. Average Air Consumption - 2cfm Includes 10 grinder heads and built-in speed regulator for precise work.

NEILSEN

Distributed by Cannon Tools Limited

Free speed : 1100rpm Air consumption : 6CFM Max air pressure : 90psi Air inlet : 1/4” Hose Size : 3/8”


Air Tools - Body Saws, Sanders, Nailers

Section 5

CT1406

CT2281

CT1076

Air Body Saw

Air Body Saw with Aluminium Body

with 2 Saw Blades 18T and 24T Strokes P/M : 10,000 Air inlet : 1/4” Hose size : 3/8” Front exhaust

Strokes P/M : 9000 Weight : 0.62 Kg Length : 265 mm Air inlet : 1/4” Hose size : 3/8” Rear exhaust

Air Shears - Metal Trimming Strokes P/M : 2200 Air consumption : 4 CFM Air inlet : 1/4” Hose size : 3/8”

CT3106

CT0678 CT2278

Air Shear Blades for CT1076 above

3" / 75mm Air Cut-off Tool

3" / 75mm Air Cut-off Tool

CT1405

Composite Body Free Speed : 20000 rpm Weight : 0.85 Kg Air inlet : 1/4” Hose Size : 3/8”

Free speed : 18000rpm Air inlet : 1/4” Hose Size : 3/8”

Air Nibbler up to 18 gauge rolled steel Cutting capacity : 1/16” Steel Cutting speed : 2800rpm Air pressure : 90psi Air inlet : 1/4” Hose Size : 3/8”

CT1075 Air Sander - 10mm Belt 60, 80, 120 grit

CT2280

Sanding belt : 10 x 330mm Free speed : 1600rpm Air consumption : 6 cfm Air inlet : 1/4” Hose size : 3/8”

Air Sander

CT1912 Orbital Air Sander - 5" / 125mm

Dual Action Composite Body Pad size : 125mm or 150mm Orbit diameter : 3/16” / 5mm Free speed : 10500 rpm Pressure : 6.2 bar Weight : 0.85 Kg Air inlet : 1/4” Hose Size : 3/8”

CT0869 Air Sander

Air consumption : 12 CFM Free speed : 9,000rpm Air inlet : 1/4” Hose Size : 3/8” Rear Exhaust

Dual Action Pad size : 125mm or 150mm Free speed : 10,000rpm Air inlet : 1/4” Hose Size : 3/8”

CT1078

CT0057

CT1077

Air Sander 5" High Speed Designed for light sanding jobs like feather edging, rust removal With 3 fibre backing pads 3”, 4½”, 5-½”

CT0879 Air Sander - Wet or Dry Pad Size : 170 x 93mm Free Speed : 8000 rpm Air inlet : 1/4” Hose Size : 3/8”

Straight Line Air Sander High quality aluminium pad Air consumption : 6CFM Free speed : 2500rpm Air inlet : 1/4” 3/8” Hose

Air Hydraulic Riveter Capacity : 3/16”, 5/32”, 1/8”, 3/32” Traction Power : 720 Kg Stroke Length : 9/16”, 14mm Air Con : 0.03 CFM, 0.86 l/min Working Pressure : 90psi Air inlet : 1/4” Hose Size : 3/8” Weight : 6.3Kg

CT2306 Palm Nailer Nail size : 8D ( 9/32" ) 1000 BMP 1-3 CFM. 60 - 90 psiI

www.cannontools.co.uk


Section 5

Spray Guns & Equipment

CT0859

Air Brush Kit Ideal hobbyist kit. Spray pattern 3 - 50mm. 15 - 50psi 1.03 - 3.5bar. Kit includes -. Air Brush. 1.5M Air line. 57ml Jar with cover. 21ml Jar with cover. Standard propellant regulator valve. Connector 1/4”F x 1/8”M

CT3745

CT3746

Air Brush & Compressor Kit

Air Brush Kit with 2 Cases

230V / 12V Adaptor Air volume : 10.5 litres per minute. Max. Pressure : 25psi (adjustable range 0 - 4 bar).

Dual action airbrush with a double-action trigger air-paint control. This professional quality airbrush is particularly suitable for model painting, vehicle painting, fine art and photo retouching. Suitable for use with CT3389

CT0866 CT2308

CT3321 Spray Gun Gravity type Spray Gun with high atomisation and low nozzle air pressure.

Spray Gun - 680ml Pressure : 50-70 Psi Nozzle Size : 1.4mm Air Inlet : 1/4” BSP Average Air Con : 11.5 Scfm Adjustable Spray Pattern and Volume Control.

Air inlet - 1/4. Nozzle Size - 0.8mm. Cup size - 120cc. Operating pressure - 30 - 50 psi. Air consumption - 2-8 cfm. Compressor required - 2-3 HP

Air Gun Kit

CT4052

Capacity - 1000ml. Nozzles : 1.4mm for Spraying and 2.0mm for Priming. Required Air Pressure - 15 - 45psi. Air Consumption - 9.5 -14.8cfm. Air Inlet 1/4 inch BSP. Includes Air Regulator Valve and Gauge

2 litre Paint Tank Kit Spray Gun with regulator. Max working pressure : 70PSI Including 80" x 1/2" O.D air hose with 1/4" fitting and paint hose with 3/8" fitting built-in pressure regulator

CT1156

CT3744

Mini Air Spray Gun Capacity : 250ml Air consumption - 10cfm. Required pressure - 35-50psi. Nozzle size - 1.4mm. 1/4 inch BSP air inlet

CT0778

CT1157

NEILSEN

Air Spray Gun

5pc Spray Gun / Air Tool Kit

Capacity : 1 Quart. Air consumption : 12.5cfm. Required pressure : 50-70psi. Nozzle size : 1.8mm. 1/4 inch BSP air inlet

Ideal for general use around the workshop. Includes High Pressure Spray Gun. Both Fluid and Air Control Nozzle together with adjustments. Tyre Inflator with Gauge. Fluid Gun with Control Nozzle. Air Dust Gun. 5M Recoil Air Hose 1/4 inch BSP

Distributed by Cannon Tools Limited

Portable Spray Booth Smart construction - folds for convenient storage. Transparent sides provides light to aid detail spraying. Strong extractor to clear spray particles effectively. Size : 48 x 42 x 36 cm with 1.5M Vent Pipe. Air flow - 3m L/min with LOw Noise : 47dB Power - 230V / 50Hz / 25W


Spray Guns, Sand Blasters CT2737

Section 5

CT3527

12pc Spray Gun Kit 2 HVLP Spray Guns. Mini Spray Gun. 2 Regulators. Aluminium Containers : 150, 600, 1000ml. Spanner and Brushes. Nozzles - 1.0 / 1.4 / 1.7mm. Air Consumption - 6 cmf. Pressure - 35 - 43psi. Air Inlet - 1/4" BSP

Air Gun for Underbody Coating. Suitable for Automotive and Industrial applications. Fits most popular types of 1 litre containers. Supplied with flexible nozzle for wax spraying cavities.

CT2094 CT2738

110V

7pc Spray Gun Kit

CT2095

HVLP Spray Gun. Mini Spray Gun. Mini Regulator. 150 and 600ml containers. Spanner and Brush. Nozzles - 1.0 / 1.4mm. Air Consumption - 6 cmf. Pressure - 35 - 43psi. Air Inlet - 1/4" BSP

CT1282

230V

CT1109

Airless Paint Sprayers - 900W Motor Power 1.2Hp. Frequency 60hz. Max Pressure 200 Bar / 2856psi. Delivery 2.1 Litres Per Minute. 15M Pressure Hose. Anti-Wear Hydraulic Oil Iso vg46 CT1906

Magnetic Spray Gun Holder 10 gallon Sand Blaster - 2.5M Hose Air Requirement : 6 - 25 cfm at 60 - 125 psi Tank Diameter : 31cm Safety Pressure Release Valve 3/8â&#x20AC;? Brass Valves for Air Throttling and Sand Metering. Equipped with Nozzle Shut-Off Valve and Pressure Gauge. Includes 4 Assorted Ceramic Nozzles.

CT1803 Portable Sand Blaster with 5ft rubber hose Handles glass beads / sand and aluminium oxide Compressor Requirement - 3Hp 90psiI Includes 30lb seamless polyethylene hopper Heavy duty sandblast gun with hardened steel nozzle

4pc Ceramic Nozzle Set for Sandblasters

www.cannontools.co.uk


Section 5

Bolt, Nut, Screw & Stud Exractor Tools

CT3035

CT3251

CT0868

Nut Splitter Heavy Duty Nut Splitter. Removes rusted and stubborn nuts. Fits 7/16” to 3/4”

2pc Nut Splitter 1/2”- 5/8”. 5/8”- 7/8” Use with 21mm socket or spanner

4pc Nut Splitter Set

CT2237 CT2238

Sizes : 9 - 12mm, 12 - 16mm, 16 - 22mm, 22 - 36mm

CT2125 Hydraulic Nut Splitter

Nut Splitter

6mm to 36mm Capacity with Spare Anvil. Includes 10mm Hex Key to Drive Hydraulic Press.

with 20mm Jaw C-Frame. Cracks nuts without damaging bolt threads. Chisel Rotates to line up parallel to bolt.

CT2762

CT3653 5pc Stud / Screw Extractor Set Sizes from 3mm to 26mm

5pc Tapered Stud Extractor Drill sizes : 1/8, 3/16, 15/64, 5/16, 3/8. Removes broken studs, screws, bolts and pipe fittings.

CT2126

3pc Stud and Screw Extractor Set

CT2274

Titanium coated High Speed Steel. For the removal of worn screws Pozidriv or Phillips. Set inlcudes 2 extractors for screw sizes No1 and No3. Drill saw acts as a drill / reamer / saw and rotary file.

25pc Drill and Guide Screw Extractor Set

CT2359

Sizes. 3/16” to 9/16” or 5mm to 16mm. Fluted Extractors for a Solid Grip on Broken Studs and Screws

8pc Stud / Screw Extractor Set

5pc Screw Extractor Set

Sizes : 4, 4.5, 6.4, 7.6, 11, 15, 19, 24mm. For removing Bolts Studs and Screws from 3 to 26mmØ.

Sizes. 3 - 19mm

CT0912

CT2246

CT4212

55pc Master Set Drill & Guide Screw Extractor Set

5pc Pipe Nipple Extractor Set Designed to free pipe nipples and studs from fittings without cracking or marring. Made of durable heat treated steel and sand blasted for resistance to rust and corrosion. Sizes : 1/8, 1/4, 3/8, 1/2, 3/4” Metric : 3.2, 6.4, 9.5, 12.7, 19mm

NEILSEN

Distributed by Cannon Tools Limited

9pc Multi-Spline Screw Extractor Set 3/8” and 1/2” Drive . 3/8”Dr Sizes : 2, 3, 4, 5, 6mm. 1/2”Dr Sizes : 8, 10, 12, 14mm

Left Hand HSS Drills : 5/64 to 1/2in. Screw Extractors spirals : 1 to 6 Multi-Spline Screw Extractors : 1/8 to 1/2in. Extractor Pins : 1 to 5 Drill Guides : 01G to 10G Extractor nuts : 1 to 5


Bolt, Nut, Screw & Stud Exractor Tools CT1101

CT1580

6pc Multi-Spline Screw Extractor Set 3/8”Dr

4pc Stud Extractor Set

Designed to loosening damaged screws and nuts. Innovative spiral profile digs itself into the head of a damaged bolt or screw for secure removal. Chrome-Molybdenum steel for long life. Sizes : 2, 3, 4, 6, 8, 10mm Note - Shown as Twist Socket Set on box.

Section 5

CT3372

3/8” & 1/2”Dr - Sizes : 6, 8, 10, 12mm. Hex End allows use with 19mm and 22mm Spanner.

CT2241 8pc Stud Remover & Installer Set

CT1089

Removes Studs without damage to the stud thread. Sizes - M6 x 1.0mm . M8 x 1.25mm . M10 x 1.25 / 1.5mm.

5pc Go Through Stud Extractor Set Sizes : 6, 8, 10, 12mm with 14/17mm Ratchet Spanner.

10pc Multi-Spline Screw Extractor Set

CT3623

CT1058

For removing broken studs / pipes and screws. Also Alemite grease nipples and fittings. Sizes : 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32”

11pc 3/8”Dr Bolt Extractor Set

CT4213

Great for loosening damaged nuts and bolts. Spiral Profile grabs nut to loosen it securely. Nut Sizes : 9 , 10, 11, 12, 13, 14, 15, 16, 17, 19mm. External Hex Sizes : 16 - 27mm. Depth : 27mm.

9pc Stud Remover and Installer Set Removes Studs without damage to the stud thread. Sizes - M6 x 1.0mm, M8 x 1.25mm, M10 x 1.25 / 1.5mm.

CT1891

CT0916 25pc Multi-Spline Screw Extractor Set

5pc Nut & Bolt Remover Set

For the removal of damaged screws and bolts. Suitable for all screw head drive types. Sizes: 3mm to 23mm or 1/8” to 7/8”

Great for loosening damaged nuts and bolts on engines / machinery and appliances. Spiral Profile grabs nut to loosen it securely. 3/8in. Drive with external hex drives Sizes : 14mm, 15mm, 16mm, 17mm, 19mm

CT3013 Stud Extractor 1/4” to 3/4” / 6 - 19mm. Ideal for removing broken or damaged bolts and studs.

CT1581

3/8”Dr

CT1582

1/2”Dr

Impact Stud Extractors For 6 - 13mm Bolts / Studs with Chrome Molybdenum Jaws.

11pc 3/8”Dr Anti-Slip Socket Set Sizes - 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19mm Ideal for broken or damaged nuts Nut socket shape allows for extra grab.

CT1381

CT1598

10pc Twist Socket Set - 3/8”Dr

5pc Twist Socket Set

Sizes - 10, 11, 12, 13, 14, 15, 16, 17, 19mm. With 8mm Straight Bar. For use with Impact Guns.

1/2”Dr Sizes : 17mm, 19mm or 3/4”, 21mm, 22mm. For removing worn or damaged nuts.

www.cannontools.co.uk


Section 5

Re-Threading Tools - Taps & Dies

CT1468

CT2316

CT1426

6pc Die & Wrench Set Dies : M6, M7, M8, M10, M12.

40pc Tap and Die Set

CT1425 32pc HSS Tap and Die Set Sizes : M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25 M10 x 1.5, M12 x 1.75. Tap Wrench : M3-12. Die Wrench : 25mm 0/D. Screwdriver and Screw Pitch Gauge.

17 Dies : 3 - 12mm. 17 Taps : 3 - 12mm. 2 Tap Wrenches - Adjustable / T-Handle. Die Wrench. Screwdriver. Pitch Gauge.

CT1465 20pc Tap and Die Set Sizes : M3 x 0.4, 4 x 0.7, 5 x 0.8, 6 x 1.0, 7 x 1.0, 8 x 1.25, 12 x 1.75mm. With Die Holder and Tap Wrench. Suitable for Re-threading Mild Steel or Aluminium.

CT1466 44pc Tap and Die Set Tap Wrenches 3 - 12.5mm and 6 - 25mm. Die Stock 50mm. Screwdriver 3mm. Sizes. : 6 x 0.75, 6 x 1.0 8, 8 x 1.0, 8 x 1.25, 10 x 1.25, 10 x 1.5, 12 x 1.5, 12 x 1.75, 14 x 1.5, 14 x 2.0, 16 x 1.5, 16 x 2.0, 18 x 1.5, 18 x 2.5, 20 x 1.5, 20 x 2.5, 22 x 1.5, 22 x 2.5, 24 x 1.5, 24 x 3.0.

CT1662

CT2139

6pc Tap Set Quick Coupler Taps : M6, M7, M8, M10, M12 CT1467 Tap Wrench 105mm Ratchet Tap Wrench M5 - M10

CT1661

115pc Tap and Die Set 10pc Tap Set witt Tap Wrench Taps : M2.5, M3, M4, M5, M6, M7, M8, M10, M12

NEILSEN

Distributed by Cannon Tools Limited

Tap Wrench 85mm Ratchet Tap Wrench M3 - M8

Drills : 2.5, 3.3, 4.2, 5, 6.8 Tap and Dies : 4 - 40 to 12 - 24 1/4 - 20 to 3/4 - 16 and 2 x 0.4 to 18 x 2.5 T Type Wrench. 5 Screw Extractors. Centre punch


Section 5

Re-Threading Tools & Inserts CT2266

CT2739

CT3511

88pc Thread Repair kit

131pc Thread Repair kit Wire Thread Inserts. Sizes : M5, M6, M8, M10, M12. 5 Taps. 1 Hex Key 5 Installation Tools. 5 Break Pin Tools. 5 Twist Drills.

M6 x 1.0 x 8.0mm M8 x 1.25 x 10.8mm M10 x 1.25 x 13.5mm With Twist Drill, Break Pin Tool and Tap for each size.

15pc Thread Repair Kit for M14 x 1.5 x 1.25

Thread Repair Kits

Thread Inserts

CT2740

25pc M5

CT3058

M5 x 0.8mm

CT2741

25pc M6

CT3059

M6 x 1.0mm

CT2742

25pc M8

CT3060

M8 x 1.25mm

CT2743

15pc M10

CT3061

M10 x 1.5mm

CT2744

15pc M10

CT3062

M12 x 1.75mm

CT2745

15pc M10

CT2746

15pc M12

CT2747

15pc M12

CT2748

15pc M12

CT2749

15pc M14

CT2233

Spark Plug Re-Thread Set - 10mm

CT3450

CT1014

Cleans and Rethreads Spark Plug Ports. Includes Tap and 4 Inserts : 3/8, 7/16, 1/2, 3/4”

CT2232

220mm Double Ended File With reversible vinyl grip. Files both right and left hand threads. Metric : 0.75, 1, 1.25, 1-5, 1.75, 2, 2.5, 3mm Pitch

Spark Plug Thread Restorer Restores the internal thread on spark plug appertures

Spark Plug Re-Thread Set - 14mm

CT1952 CT3417

Cleans and Rethreads Spark Plug Ports. Includes Tap and 4 Inserts : 3/8, 7/16, 1/2, 3/4”

CT3446 Wheel Stud Thread Restorer This set restores damaged wheel nut threads.

42pc Re-thread kit Re-Thread Die Sizes : 1/4” - 5/8” UNC / UNF 6 x 1.00 - 12 x 1.75mm Re-Thread Tap Sizes : 1/4” - 9/16 UNC / UNF 6 x 1.00 - 12 x 1.75mm Thread Files : 9 - 32 and 11 - 24.

25pc Spark Plug Thread Repair Kit Incorporates taper and plug taps together with integrated reamer. Stepped tap ensures correct alignment of cutter in existing spark plug hole. Extension tools allow easy access to the bottom of the plug recess. Includes plug coil inserts.

www.cannontools.co.uk


Section 5

Bolt Cutters & Tin Snips CT3292

Bolt Cutters CT0294

14” / 355mm

CT0295

18” / 460mm

CT0296

24” / 600mm

CT0297

30” / 760mm

CT0298

36” / 915mm

Aviation Snips Nibbler for Power Drills. Cutting Capacity 1.5mm mild steel and 1.2mm Stainless Steel. Fits all types of power drills with 0 - 16mm Chuck.

CT3343 CT0206

Aviation Snips

8” / 200mm Aviation Snips

250mm Straight Cut Aviation Snips

CT2147

Tin Snips

CT1102 CT0207

Mini Bolt Cutter 8” / 200mm Mini Bolt Cutter

10” / 250mm Aviation Snips

3pc Aviation Tin Snip Set

CT2144

Straight, Left and Right. Serrated Cutting Jaws with Soft Grip Handles

Tin Snips

CT0208

CT1933 Heavy Duty Wire Rope Cutter Cuts Steel Cable and Wire Rope. 24” / 600mm Steel Handles for Extra Leverage.

10” / 250mm Aviation Snips Heavy Duty Tin Snips

CT2145

12” / 300mm Aviation Snips Tin Snips

CT1934

Heavy Duty Wire Rope Cutter Cuts Steel Cable and Wire Rope. 36” / 900mm Steel Handles for Extra Leverage.

NEILSEN

Distributed by Cannon Tools Limited

12” / 300mm Aviation Snips Heavy Duty Tin Snips

Keep up-to-date with products on all devices


Hacksaws & Hacksaw Blades CT1809

CT0517

Section 5

CT3724

Junior Hacksaw 6” / 150mm Junior Hacksaw. Supplied with 1 blade.

CT0211

12”/ 300mm Heavy Duty Hacksaw

12”/ 300mm Hacksaw with 3 Blades

Rubber Grip Handle. 45 or 90 degree Cutting Angle.

CT0667

CT2827

Junior Hacksaw 6” / 150mm Junior Hacksaw. Supplied with 4 blades.

CT3709

12”/ 300mm High Tension Hacksaw 45 and 90 degree Cutting. Aluminium handle.

CT3230

Utility Mini Hacksaw Ideal for difficult access. Use with either 250mm or 300mm hacksaw blades.

Junior Hacksaw

CT3231

6” / 150mm Junior Hacksaw. Supplied with 1 blade.

CT0410

4 Hacksaw Blades

8 Hacksaw Blades

12” / 300mm. 8% Cobalt Bi-metal 18T / 24T.

12” / 300mm. 18T / 24T Resilience Quality Carbon Steel.

Junior Hacksaw 6” / 150mm Junior Hacksaw with Aluminium mitre box.

CT0036

CT3650 CT0038

Wire Hand Saw 12 Hacksaw Blades 12” / 300mm Hacksaw Blades.

Ideal for cutting Metal and Plastic piping. Allows access to confined spaces. 2 Wire Blades included.

12 Junior Hacksaw Blades 6” / 150mm - 24 tpi Suitable for most Junior Hacksaws.

www.cannontools.co.uk


Section 5

Files & File Sets

CT3342

CT1607

CT2441

5pc Diamond File Set Alloy Steel 150 grit. 175mm Long with Soft Grip Handles.

CT1134

6pc Needle File Set 140mm with Pro Grip Handles.

CT1423

Half Round Round Flat Square Equalling Triangle.

6pc Diamond Needle File Set Alloy Steel 150 grit. 175mm Long with Soft Grip Handles.

CT3049 10pc 140mm Needle File Set with Pro Grip Handles.

CT1358

Chainsaw File 4.0mm

10pc 140mm Diamond File Set with Insulated Handles.

CT3439

Riffler File Set 10pc Needle File Set

5pc File Set

Files 3mm x 180mm Excellent for hobby and craft metal working. featuring a ‘S’ curve shape and are double ended.

8” / 200mm Steel Files Square, Flat, Half Round, Round, Triangular

CT3050 Chainsaw File 4.8mm

CT1439 8” Files

5pc File Set 8” / 200mm Steel Files Square, Flat, Half Round, Round, Triangular

CT1360

Square

CT1361

Flat

CT1362

Round

CT1363

Triangular

CT1418

Half Round

12” Files CT1364

Square

CT1365

Flat

CT1366

Half Round

CT1367

Triangular

CT1417

Round

CT1608

9pc File Set 140mm / 200mm Flat Parallel, Flat Taper, Round, Half Round, Triangle, Square. Heat treated high carbon steel

NEILSEN

Distributed by Cannon Tools Limited

NOTE: We are constantly up-dating our product range, so file handles may differ from the pictures shown here

NOTE: We are constantly up-dating our product range, so file handles may differ from the pictures shown here


Chisels & Punches CT0476

CT1820

CT0867

6pc Punch & Chisel Set

18pc Punch Set Centre Punch. 8 Brass Pin Punches. 8 Pin Punches. 1/16” - 5/16“

6pc Pin Punch Set 7” Long. Sizes : 3, 4, 5, 6, 7, 8mm

CT2136

Section 5

Chisels : 10, 12mm. Pin Punches : 3, 6mm. Tapered Punches : 2, 8mm

CT1821

CT1042 12pc Punch & Chisel Set

4pc Extra Long. Taper Punch Set 4, 5, 6, 8mm x 300 - 450mm

CT1918

4pc Extra Long. Taper Punch Set 12”, 14”, 16”, 18” Long Sizes : 5/32”, 3/16”, 1/4”, 3/8”. Drop Forged . Heat-Treated. Precision Ground Tips.

Chisels : 10, 12, 16mm. Tapered Punches : 2, 6, 8mm. Pin Punches : 1.5, 3, 4, 5, 6, 8mm.

CT0089

CT1041

8pc Punch & Chisel Set 4pc Extra Long Chisel Set 18 x 250, 300, 350, 400mm

CT2135

Centre punch : 3/16”. Pin punches : 3/8”, 1/2”. Taper punches : 3/16”, 3/8”. Chisels : 7/8”, 1”, 1-1/4”.

12pc Punch & Chisel Set with Jumbo Sizes

CT1043

CT0972

14pc Punch & Chisel Set 12pc Punch & Chisel Set Chisels : 10, 12, 16mm. Pin Punches : 1.5, 3, 4, 5, 6, 8mm. Tapered Punches : 2, 6, 8mm.

CT0703

16pc Punch & Chisel Set Chisels : 9.5, 12.5, 16mm. Centre Punches : 3, 5mm. Pin Punches : 2, 3, 4, 5, 6mm. Tapered Punches : 2, 3, 4, 5, 6mm. Chisel Pinch Gauge

14pc Punch & Chisel Set Pin Punches - 2, 3, 5, 6mm Taper Punches - 2 x 3, 4, 10mm Cold Chisels - 13, 16, 19, 22, 25mm and Centre Punch

Pin Punches - 2, 3, 5, 6mm Taper Punches - 2 x 3, 4, 10mm Cold Chisels - 13, 16, 19, 22, 25mm and Centre Punch

CT2929

CT1920

18pc Pin Punch Set with Automatic Centre Punch 4”/ 6”/ 8”: 1.5, 2.5, 3, 4, 5, 6, 8, 9.5mm.

28pc Punch & Chisel Set Chisels Chisel / Punch Gauge. Centre Punches, Pin & Taper Punches.

www.cannontools.co.uk


Section 5

Chisels & Pry Bars

CT2243

2pc Engineers Scriber Set

CT0486

CT1497

Alpha Numeric Punch Set

Alpha Numeric Punch Set

Letter and Number Punches Letters A-Z and Numerals 0-9

Letter and Number Punches Letters A-Z and Numerals 0-9

CT1129

CT1744

CT1251

6pc Punch & Chisel Set 15pc Punch & Chisel Set

6pc Punch & Chisel Set Centre Punch. Pin Punch - 3mm. Tapered Punch. Cold Chisels : 10, 13, 16mm

Centre Punch, Taper Punches Cape Chisels, Flat Chisels

CT3455

CT2759

178mm Long. Centre Punch. Pin Punch - 3mm. Tapered Punch - 4mm. Cold Chisels - 16, 19mm. Taper Chisel - 6mm

CT3002

Ratchet Pry Bar

3pc Pry Bar Set

4pc Heavy Duty Pry Bar Set

24” / 600mm Ratchet Action Pry Bar with 8 positions

Sizes : 200, 300, 430mm. Rubber Handles.

Sizes : 200, 300, 450, 600mm. Pound Thru with Comfort Ergonomic Grip

CT1487

CT1798

CT0239

4pc Roll Head Pry Bar Set Sizes : 150 x 8mm, 300 x 10mm, 400 x 14mm, 500 x 16mm Tapered Head and Slipper Foot

CT2315

5pc Pry Bar Set

5pc Pry Bar Set

with Roll Head Bar Sizes : 8”, 12”, 18”, 24”

Roll Head Bar 110 x 11mm, 185 x 16mm, 310 x 20mm, 460 x 20mm

CT1216

Pry Bar - 36” Bent

Pry Bar - 36” Bent

Handle Size 38mm Dia x 220mm. Shaft - 16 x 16mm. Heat Treated and Chrome Plated

Jumbo Size Bent End Pry Bar. 36 inch / 915mm with Go-Thru Handle

CT2314

NEILSEN

CT1217

Pry Bar - 36” Straight

Pry Bar - 36” Straight

Handle Size 38mm Dia x 220mm. Shaft - 16 x 16mm. Heat Treated and Chrome Plated

Jumbo Size Straight End Pry Bar. 36 inch / 915mm with Go-Thru Handle

Distributed by Cannon Tools Limited


Bodyshop Tools & Pry Bars CT1794

Section 5

CT2239

1kg Slide Hammer 25mm Pry Bar with Bent Chisel End 700mm long

CT1796 Pry Bar 56” / 1400mm

1kg Slide Hammer 50mm Pry Bar with Straight Chisel End 700mm long

1” x 56” Jumbo Pry Bar. Pound-Thru Handle Bent Nose / 25mm Gauge

CT3931 CT3526

CT2133

Fender Roller Wheel Arch Reformer and Flaring Tool.

9pc Dent Puller Set 5lb Dent Puller for automotive use

13pc Dent Puller Set

CT2346

with 10lb Slide Hammer. With steel hooks pullers and attachments

Portable Hydraulic Repair Tool Kit

CT0729

Universal fitting. Rotates from the wheel hub centre. Repair wheel arch collision damage. Increases the clearance between wheel and fender.

CT3759

8pc Dent Removal Tool Set

16mm - 140mm. Min Height - 42mm - 363mm

CT1259

Hydraulic Body Repair Kit 10 ton Hydraulic Automotive Body Repair Kit.

10pc Body Repair Kit

CT2138

Ideal for removing small dents and minor accident damage. Half-round bars - 21 and 22 cm Round bar - 42 cm. Half-round pointed bar - 60 cm. Angled ball-headed bars - 46 and 100 cm. Pointed bar - 56 cm. Special-type hooked bar - 107 cm

CT2097

with Interchangeable Heads.

CT2310

9pc Panel Beating Kit

7pc Panel Beating Kit Auto Body Repair Set. Drop Forged Steel Dollies. Contents Include : Body, Pick and Bumping Hammers. Universal Heel, Curved and Mushroom Dollies.

7pc Panel Beating Kit Auto Body Repair Set. Bumping, Reverse Curve, Pick and Finish Hammer. Utility,. Double End, Shrinking and Curve Dollies.

Auto Body Repair Set. Hammers : Bumping, Straight Pein Finishing, Heavy Duty Shrinking, Pick and Finishing. Dollies : Utility, Curved, Heel, with mirror finish. Toe Dolly with mirror finish. Moulding Spoon.

www.cannontools.co.uk


Section 5

Cockpit & Steering Tools

CT3019

CT3022

CT4055

Steering Wheel Lock Plate Tool Ideal for detaching steering column lock plates on the majority of cars with air bags. 1-9/16â&#x20AC;? x 18mm and 14 x 1.5mm adaptor.

Steering Wheel & Installation Set Application suitable for a wide range of vehicles

CT2240

CT2592 Steering Wheel Puller

12pc Trim and Audio Removal Set Safely remove and install car audio, interior, exterior trim, dash and door panels. With Clip Levers, Piercing Tools, Pull-out Hooks and Radio Removal Hooks. Designed to fit any vehicle.

CT2570

3pc Inflatable Hand Pump Set

2 Leg Puller 90 /140mm long. Yoke and Thrust Bolt. 2 Thrust Caps. Spread : 38 - 85mm. For use on Ford and GM, Vauxhall and Opel vehicles

For positioning Panels and Bonnets prior to fitment. 2mm Bag Thickness and Semi-Rigid Construction allows bags to be slid between the window frame

For most popular vehicles in-car audio equipment

CT2103 CT2591

20pc Radio Removal Tool Set

For Professional Use Only

CT3567

Lock-out Tool Set

Steering Wheel Puller Steering Wheel Remover and Lock Plate Compressor. For vehicles with or without Tilting Steering. Compresses steering wheel lock plate to remove and install snap ring.

Universal Lock-out Tool Set. Thin Bar. Wide Bar. Wire Form S-Hook. Slide Lock Tool. Wonder Tool. Plastic Coat Hanger. Fuel Cap Tool. Wedges. NOTE This set is sold on the provision that it is used Lawfully.

52pc Radio / ICE Removal Tool Set Allows damage free removing of vehicle ICE Suitable for the following makes Clarion, Kenwood, Panasonic, Pioneer and Sony.

CT3914 CT3367

CT4073 2 / 3 Leg Steering Wheel Puller Kit

Door Hinge Adjuster For adjusting the alignment of doors with bolted or welded hinges. Provides excellent grip and leverage.

CT1716 Airbag Removal Tool Set For removing automotive steering wheels. Suitable for Cars, Vans, Trucks NOTE: Not usable on vehicles equipped with airbags.

NEILSEN

Distributed by Cannon Tools Limited

Steering Wheel Lock Heat Treated Steel Construction. Automatic Locking System. Fitted with Brass Cylinder and 2 Keys.

1/4 in. Drive x 87mm Bits Star : T25, T30, T25, T30 Tamper Proof and 5mm Hex. For the removal of the drivers airbag from the steering wheel. VW vehicles 1999-04 such as -. Beetle, Bora, Golf, Jetta, Passat. Skoda Fabia and Octavia. New model BMWs. Seat and some Mercedes vehicles.


Picks, Hooks & Trim Tools CT0609

CT3309

4pc Pick & Hook Set

4pc Pick & Hook Set

5pc Pick & Hook Set

Extra Long

200 - 420mm Long

Section 5

CT3310

For separating wires and removing small fuses and O rings etc.

CT1942

CT2760 CT1547

9pc Heavy Duty Pick & Hook Set

6pc Pick & Hook Set Straight / 90° Pick, Double Angle Pick, Complex Pick.

with Gasket Scraper. Ideal for Gasket Scraping and Hose Removal

12pc Pick, Hook & Precision Screwdriver Set with Phillips, Star and Slotted Drivers

CT3681

CT2580 CT2287

27pc Trim Panel & Scraper Set.

5pc Trim & Moulding Tool Set

11pc Trim & Moulding Tool Set

Non-marking Plastic for removing Automotive Trim.

Non-Scratch Impact Resistant Nylon. For removing Automotive Windshields, Trim, Door Panels and Dashboard Fascias

Non-Scratch Impact Resistant Nylon. For Trim, Door Panels and Dashboard Fascias

CT0276

CT0580 CT2798

2pc Tweezers Set with Straight and Bent Nose

4pc Plastic Scraper Set

Body Moulding Tool Set For easy removal of Mouldings, Door coverings, Plugs and plastic clips. Avoids damage to lacquered surfaces

CT3789

Sizes : 19, 22, 25, 38mm x 270mm. Ideal for removal of glued weights on aluminium rims. Suitable for removing trim from bodywork

CT3010

CT3034

4pc Body Filler Applicator Set Body Filler Scoop for Automotive body repair use

Sizes -: 2, 3, 4, 6” Flexible Steel Blades with Rubber Grips

Dent Repair Kit Complete kit to repair minor dents in bodywork. Save time and money in simple easy steps. The kit Includes Hot melt glue gun, Glue sticks, Glue scraper, Pulling bridge , Dent pulling tabs with wing nut. With Knockdown and Release agent.

www.cannontools.co.uk


Section 5

Hole Punches & Trim Tools

CT2834

CT3509

CT2128

Door Upholstery Clip Remover Chrome plated for durability. Square vinyl handle for surge grip. Quickly removes plastic fasteners from door panels on most foreign and domestic vehicles and Trucks.

CT2370

Hole Punch

Mini Trim Clip Removal Pliers

9.5” / 240mm Heavy Duty Leather Punch. Sizes : 2, 2.5, 3, 3.5, 4, 4.5mm.

100mm - Small size for limited access. Glass reinforced nylon with spring handles.

CT0419 CT3861

Hole Punch 9” / 230mm Leather Punch

Trim Clip Removal Pliers

6pc Extra Long Trim & Door Panel Tool Set

for the quick removal of Staples, Clips, Door panels, Facia and Trim Supports without damage. Easy access for confined areas.

CT1538

CT0854 CT4078

6pc Hole Punch Set Sizes : 1/8, 5/32, 3/16, 7/32, 1/4, 5/16”

CT1539

6pc Trim and Pry Tool Set 6 Trim and Pry Tools Remove trim and mouldings without damage. For interior and exterior trim. Black wedges for hard prying. Red wedges for soft prying. 5 x 7/8 x 1/2 | 7 x 1 x 5/8 | 7 x 2 x 5/8 inch. For body shop use and electronics installers.

CT1576

CT0060 12pc Hole Punch Set Sizes : 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4”

40pc Plastic Rivets

CT1540

40 Plastic Rivets. 4 Assorted Sizes

4pc Trim & Moulding Tool Set 4pc Trim Tool and Door Service Kit. Door Handle Clip Tool. U-Slot. V-Slot. Mini V-Slot Tools

NEILSEN

Plastic Riveter Set with 40 plastic Rivetsm

Distributed by Cannon Tools Limited

Please Check out Section 9 for Trim Clip Assortment Boxes

14pc Hole Punch Set For cutting Rubber, Plastic, Felt, Foam and Leather. Sizes : 5, 6, 8, 10, 11, 13, 16, 19, 22, 25, 28, 32, 35mm.


Windscreen Tools CT2472

CT1556

Section 5

CT1125

Suction Cup Dent Puller Suction Cup

Perfect for pulling out metal dents and lifting Glass, Sheet Metal or any smooth surface material. Durable High Impact Nylon Body with Quick Release Handle.

65mm diameter Mini Suction Cup.

CT0568

4 Cup Suction Lifter 115mm diameter cups. Perfect for lifting Glass or any smooth surface material.

CT0793 CT3248

3pc Windshield Removal Tool Set

Wind Shield Removal Tool

For the removal of bonded and rubber seal screens. With Cutting Wire and Wire Gripping Handles

with Steel Cable Pull Handle. Cuts the butyl adhesive caulking compound around windows with tempered steel blade.

CT4057 CT2583 Windshield Removal Handles

Wiper Arm Removal Tool For removing taper mounted wiper arms. Compact design for hard to reach places. Chrome plated corrosion protection.

CT4072

2 Wire Gripping Handles for removing windshields. Suitable for use with CT4056.

Universal Wiper Arm Removal Tool

Windshield Tool

CT4056

Window Moulding Remover

Adjustable arms and high torque knob for forcing screw. Prevents damage to the wiper arm.

CT1899

50M Windscreen Cutting Wire

CT0591

For the rmoval of the butyl adhesive caulking compound. Stainless Steel / Square Profile Suitable for CT0568 | CT3552 | CT4057

Wiper Arm Puller For the efficient removal of Windscreen Wipers. Compact construction for hard to reach wiper stems.

CT3552

CT3951 8pc Wiper-Arm Puller Set

7pc Windshield Removal Tool Set. A complete tool kit for the removal of bonded and rubber seal screens. Cutting Wire. Wire Gripping Handles. Windshield Removal Tool. Wire Feeder Tool. Trim Pad Remover. Windshield Moulding Release Tool

6 Grippers. Slide Hammer Pressure Spindle. Universal puller set to remove bolted windscreen wiper arms especially for those which have become rusted or corroded onto the drive-shaft. This set will easily remove stubborn and deep-seated Wiper Arms. Integrated Screen-Wash nozzles on the rear windows can be easily removed by using the Slide hammer. Wiper Arms with central holes may be removed by using the Pressure Spindle. Wiper Arms with no central hole require the Pressure. Bolt to be used with the Pressure Adaptor supplied.

Heavy Duty Wiper Arm Puller 2 Arm puller with special krallex legs and integrated leg clamp for narrow spaces. Different hooks with extra thin tips and adjusting nut make this puller suitable for most vehicles.

www.cannontools.co.uk


Section 5

Mirrors & Pick-up Tools

CT0231

CT0195

CT3608

Magnetic Pick-up with Flexible Shaft

5lb Telescopic Pick-up Tool - 679mm. Flexible Shaft Claw Grap - 610mm

Retractable Claw and Bright LED Lift Capacity : 2.5lb Length : 600mm / 24 in.

Diamond Picker Ideal for Jewellery making and watch makers. Push end to reveal spring loaded prongs..

CT1530

3pc Inspection & Pick-up Set 50mm Ø Telescopic Mirror, extends to 546mm.

CT1531

CT1532

30mm Inspection Mirror

50 x 80mm Inspection Mirror

50mm Inspection Mirror

Telescopic shaft with pocket clip. Extends from 180 to 600mm.

Fully flexible head to give good visibility in concealed areas.

Telescopic shaft with pocket clip. Extends from 280 to 430mm.

CT3423

CT3424

CT3259

75mm Diameter Inspection Mirror

50 x 80mm Inspection Mirror

Telescopic Shaft with 2 LEDs. Extends from 290 to 876mm.

Telescopic Shaft with 2 LEDs. Extends from 285 to 870mm.

2pc Mirror & Pick-up Tool Set with super bright LED. Telescopic 2” / 50mm Inspection Mirror. Extends from 9 to 28 inch with cushion grip handle.

CT1528 CT1527

CT2811 Magnetic Pick-up Tool 5lb Magnetic Pick-up Tool. Telescopic shaft extends from 125 to 640mm.

Magnetic Pick-up Tool 2lb Magnetic Pick-up Tool. Telescopic shaft extends from 125 to 640mm.

Magnetic Pick-up Tool CT1529

Magnetic Pick-up Tool with 6 LEDs Extend to 790mm with 5lbs lift capacity

Lif ting Capacity

10lb CT4200

CT3036 Magnetic Pick-up Tool 10lb Super Strength Magnet. Telescopic shaft extends from 165mm to 650mm.

Magnetic Pick-up Tool Set with Flexible Shaft, LED Light and 2 Magnetic Mirrors. Lifting Capacity : 1500g Length : 600mm

CT2810 Lif ting Capacity

16lb

Magnetic Pick-up Tool 16lb lift capacity extends to 760mm.

NEILSEN

Distributed by Cannon Tools Limited

Magnetic Pick-up Tool Extends to 600mm. Ball joint allows 90° swivel.


Parts Trays & Washers CT1932

CT1901

3" / 75mm Stainless Steel Magnetic Tray

4” / 100mm Stainless Steel Magnetic Tray

Section 5

CT1313 4" / 100mm Magnetic Tray

CT4161

CT1314

CT1315 Bowl Type ABS Magnetic Parts Tray

6” / 150mm Stainless Steel Magnetic Tray

6" / 150mm Magnetic Tray

Deeper than usual parts trays to improve usage. 145mm Ø

CT4198

CT1316

ABS Magnetic Parts Tray

CT1317

9.5" SQ. Stainless Steel Magnetic Tray

150mm Ø PVC coating prevent scratching

CT4197 ABS Magnetic Parts Tray 230 x 130mm 9” x 6" Stainless Steel Magnetic Tray

PVC coating prevent scratching

CT1302 CT4199

CT1318

2pc ABS Magnetic Parts Tray Set

Magnetic Rails 3pc set

100mm / 150mm PVC coating prevent scratching

6pc Magnetic Set

CT2599

Stainless Steel Parts Trays Magnetic Rail & Magnetic Pick-up tool

3.5 Gallon Parts Washer

CT1345 CT1908

230V / 50Hz. Heavy duty shelf. H 47cm. W 36cm. D 26cm. Circulates 1/2G p/m

Magnetic Sweeper 16" / 400mm with wheels Telescopic handle 31”- 43” Pull up handle for debris release

4pc Magnetic Tray Set Sizes : 11 x 15, 11 x 21, 11 x 27, 11 x 31cm

CT0781

CT2600 20 Gallon Parts Washer 230V / 50Hz.

CT1907 Magnetic Sweeper 24" / 600mm with 7” wheels Lift Capacity : 30lb Adjustable height 3/4” to 1 1/2”

Storage Rack with Moveable Plastic Bins

Solvent filter system. Waterproof On/Off switch. H 78cm. W 55cm. D 31cm. Circulating 50 gallons per hour. Heavy duty shelf and parts basket.

www.cannontools.co.uk


Section 5

Workshop Equipment

CT4120

CT4150

CT3352 Non-Slip Grip Mat 45 x 125cm Washable and mould resistant.

Mechanics Trolley / Seat

Mechanics Kneeboard For fatigue free working with padded knee trough. Max. Capacity : 120kg. 5 wheels for high stability

Mobile Work Seat with Drawer

CT1474

CT1305

CT3989

3 Drawer Tool Box with Lock Mechanics Trolley / Seat

CT1475

Oil Resistant Vinyl Covered

EVA 3 in1 Folding Mechanics Work Mat

CT0317

For Lying Down, Kneeling or Sitting.

EVA Mult-Purpose Foam Floor Mat

CT2249

4 Drawer Tool Box with Lock

Shock Absorbent with Anti-fatigue Benefit. Water Resistant Size : 235 x 115cm x 7mmThick

CT1472

Work Mat 100cm X 45cm EVA Foam Red & Black

CT0316

CT1267 EVA Mult-Purpose Foam Floor Mats Water resistant and easy to clean. Each mat measures 600 x 600mm. Covers floor area up to 1.44M Square. With jigsaw puzzle edges for linking mats.

Plastic Creeper 40" / 1020mm CT0805

CT0604

Tool Chest & Roller Cabinet 8 Draws with Top Compartment. With Castor Wheels and 2 Keys.

CT0473 CT1886

36in. / 915mm Foldable Z Creeper Seat 150kg Load / Size : 92 x 44 x 12cm 120kg Load / Seat Size : 45 x 44 x 38cm

NEILSEN

Red

Distributed by Cannon Tools Limited

Black

Magnetic Wing Cover


Workshop Equipment CT1069

Section 5

CT1996

13 Drawer 2 Part Stack Steel Tool Box Top Compartment : 650 x 300mm with 6 Sliding Drawers and Tote Tray. Bottom Chest : 7 Sliding Drawers 565 x 255mm 35 and 65mm Deep.

CT2143

48” Mobile Workbench Solid 38mm hardwood worktop. Fingerprint resistant stainless steel. Secure locking cabinet and drawers. Heavy duty 6 x 2 inch casters - 2 fixed and 2 swivel with brakes. With protective drawer liners and 8 plastic storage bins included.

CT1973

3.0KW Electric Space Heater Voltage - 230V - 50Hz Output - 510M cubed per hour Power Input - 3000W 3 Settings - 40W / 1500W / 3000W

CT2140 PRORANE SPACE HEATER Voltage - 230V - 50Hz Output power: 15kw Fuel Consumption - 1.12 Lph Power Input - 30W Gas Type - LPG Pressure - 0.7 Bar

60” Mobile Workbench Solid 38mm hardwood worktop Fingerprint resistant stainless steel Secure locking cabinet and drawers. Heavy duty 6 x 2 inch casters - 2 fixed and 2 swivel with brakes. With protective drawer liners and 4 plastic storage bins included.

CT2142 CT4125

Space Heater - 30KW Diesel Electric Start Voltage - 230V - 50Hz Output - 600M cubed per hour Fuel Consumption - 2.92 Lph Tank Capacity - 32 litres Power Input - 200W Gas Type - LPG Pressure - 0.36 Bar / 5.0psi 10 hours continuous use

CT2141

Space Heater - 50KW Propane Electric Start Voltage - 230V - 50Hz Output - 1500M cubed per hour Fuel Consumption - 3.64 Lph Power Input - 105W Gas Type - LPG Pressure - 1.5 Bar

84” Mobile Workbench Steel Roller Cabinet with 38mm rubber wood worktop. Aluminium drawer handles 6 inch TPR wheels. L-213.4 | W-50.8 | H-147.3cm. Net weight : 145kg

www.cannontools.co.uk


Section 5

Welding Equipment

CT0635

CT0636

CT0637

Welding Holder

Welding Holder

Welding Holder 3” / 75mm 25lb Magnetic

CT2317

4” / 100mm 50lb Magnetic

5” / 125mm 75lb Magnetic

CT1902

CT1930

4pc Magnetic Welding Aids

Magnetic Welding Aid

with 45°, 90° and 135° angles.

with On/Off release switch - 45 / 90 degree angles

Welding and Cutting Kit For Welding up to 6mm thick steel and cutting 12.5mm thick steel. Torch Handle. 4.5M 6mm Twin Hose with Connectors. Acetylene Regulator. Oxygen Regulator. Welding Tips - 0 / 2 / 4 Tip Cleaner. Rosebud Tip. Spark Lighter. Coupling Nut. Spanner. Goggles

CT2229

CT2230

Electric Arc Welding Machine

Electric Arc Welding Machine

Current Range: 60-200 Amp Input Capacity: 11.2kw Electrodes: 2-4mm Weight: 17.5kg

Current Range : 65-250 Amp Input Capacity : 14kw Electrodes : 2.5 - 5mm Weight : 25.5kg

CT1057

CT0418 CT0529

Welding Pliers 11in. / 280mm 60mm Wide Jaws Carbon Steel

Welding Mask 25ft Twin Welding Hose Reel 1/4” For Industrial and Commercial Applications Solid Steel Axle and Hose Stop Guard Smooth Operating Roller Bearing

NEILSEN

Distributed by Cannon Tools Limited

Wide Viewing Area with Auto-Darkening in 1/10,000 second and Automatic power On/Off Requires 2-AAA Batteries ( NOT included )

More Welding Masks on Page 230


Riveting Tools CT2288

CT3646

Section 5

CT1229 Professional Nut Riveter

Panel Flanging and 5mm Punch Tool

3, 4, 5, 6mm

Rotating Head. Prepare Flange. Punch Holes. Spot Weld Through Holes. For Smooth and Level Joints.

Rivet Gun

CT4160

11" / 280mm Heavy Duty Rivet Gun. with Waist Bottle for spent rivets. Nozzle Sizes : 2.4, 3.2, 4.0, 4.8mm. With Comfort Grip.

CT1419

Hand Riveter Rivet Sizes : 2.4, 3.2, 4.0, 4.8mm Ergonomic Comfort Grip with PVC Handle

17” / 430mm Riveter with 2 handed operation for extra leverage

CT0367

Hand Riveter with 40 assorted rivets : 2.4, 3.2, 4.0, 4.8mm.

CT1128 Hand Riveter Heavy Duty Aluminium Body Riveter Extra Long Handles, Comfort Grip with Nose Spanner. Nozzles : 1/8”, 3/16”, 3/32”, and 1/4”.25. Rivets of each size : 1/8”,. 3/16”, 3/32”, 1/4”

CT4099

CT3994

400pc Rivet Assortment

18V

Aluminium with Steel Pin. Length : 37mm Sizes : 2.4, 3.2, 4.0, 4.8 x 6.4mm

CT2858

18V

18V Battery Spare Li-Ion Battery for CT3994 Cordless Riveter

CT1521 Swivel Head Rivet Gun With 4 Interchangeable Tips 2.4, 3.2, 4.0, 4.8mm and 75 Rivets

CT0545

Cordless Riveter 18V 4.0AH Li-Ion Battery For 3/32'' to 3/16'' Rivets Stroke: 19mm Max working force: 9000Nm Max mandrel dia. : 5.0mm Weight: 3.51lbs in use. 100Min Quick Charger

Lazy Tongue Riveter Accordion Heavy Duty Riveter. Single Pull Action designed for fast repetitive applications. Carbon Steel Lattice and Head. Shaped Enamelled Aluminium Die Cast Grips. 5 Nozzle Sizes : 3.2, 4.0, 4.8, 6.0, 6.4mm

www.cannontools.co.uk


Section 6

Testing Equipment CT3808

CT3807

CT2082

2pc AC Voltage Tester Set AC Voltage Tester

AC Voltage Tester

110 / 230 Volts Mains Tester. Size - 140 x 3mm

110 / 230 Volts Mains Tester. Size - 190 x 3.5mm

CT3265

CT3264

CT3262

AC Test Pen / Circuit Tester AC

AC Test Pen / Circuit Tester

AC Circuit Tester Range : 100 - 500V

AC Circuit Tester Range : 100 - 500V

CT3263

Test Range 100 - 250V Sizes 190 x 3.5mm and 140 x 3mm With Plastic Handles and Pocket Clip

CT1590

AC / DC Voltage Tester Range - 12V DC - 230V AC with Digital LCD Display

CT1591 110 / 230V AC Voltage Tester

AC / DC Voltage Tester

110 / 230V AC Voltage Tester

6” / 155mm. Frequency 50 - 500Hz. Power consumption up to 0.5 mA Over-voltage class Category III. Glow Lamp. 5° to 40°C max. 80% at maximum of relative

Range : 12V DC - 230V AC Digital LCD Display with Back Light

7” / 190mm. Frequency 50 - 500Hz. Power consumption up to 0.5 mA Over-voltage class Category III. Glow Lamp. 5° to 40°C max. 80% at maximum of relative

CT3546

230V Electrical Socket Tester Test 240V Domestic Electrical Outlet Sockets. Detects mains wiring status using easy to read Neon lights with Complete Safety.

Please Check out Section 5 for more Testing Equipment Pages 64-68

CT2129

CT3220 CT3403 REVISED MODEL

3 in 1 Battery, Bulb and Fuse Tester Can be used to test dry cell 1.5V batteries AAA / AA / C / D and 9V batteries. Domestic and automotive fuses plus various bulbs. Readings show up on a clear colour coded scale. Powered by a 9V battery included.

NEILSEN

Distributed by Cannon Tools Limited

3pc Electrical Tester Kit Digital multimeter and Socket Tester. Non-contact Voltage Detector with Batteries

3 in 1 Multi-Detector Makes drilling safer by locating cables, pipes and studs within walls. Twin warning system provided by both audio signal and flashing LEDs. 9V battery included.


Soldering Tools CT1842

CT2387

Section 6

CT2388

30W Soldering Iron

60W Soldering Iron

30W / 230V Soldering Iron

60W / 230V Soldering Iron

CT1240

CT1849 Gas Powered Turbo Torch

150W Soldering Gun 230V / 150W Soldering Gun. Work Light and 2 extra solder attachments.

Gas Powered Turbo Torch Turbo Flame - 1300°C / 2450°F

CT2830

Butane Gas Soldering Torch

Ceramic Burner with Flame Adjustable from 1 - 25mm Butane Gas gives approx. 1hr use. Ideal for Soldering, Plastic Pipe Bending, etc.

CT1239

CT0407

Slip on heads ideal for Hobby use Melts gold / silver / copper and small rods For electrical solder work with butane lighter fluid

CT1925 Soldering Stand Helping Hand with 90mm Magnifying Glass

CT3736 Soldering Stand Helping Hand with 60mm Magnifying Glass

Butane Gas Soldering Iron Gas Powered Soldering Iron and Hot Air Blower. Suitable for Auto Repairs, Electronics and Heat Shrinking.

Solder Reel - 100g 60 / 40 Tin / Lead

CT3072

CT0989 15g Solder Tube

Insulation Tape 10 Rolls in a pack

Connector Blocks 10pc / *5pc CT0430

3 amp

CT0431

5 amp

CT0432

10 amp

CT0433

*15 amp

CT2918 CT2919 CT3671 CT3672 CT3673 CT3674

Black Mixed Red White Yellow Green

Engraver For engraving Metal, Plastic, Glass and wood. 2 x AA batteries Included

CT1670

230V Engraver 230V / 13W / 50Hz Includes 1 Engraving Bit and 2 Stencils

www.cannontools.co.uk


Section 6

Lights, Lamps & Torches

CT2603

CT0628

CT0196

LED Clip-on Light for Book Reading . LED Torch LED Torch with Key Ring Super Bright LED Mini Torch 2” / 50mm with 4 AG13 Batteries included.

CT0627 Mini LED Torch

CT3846

CT2602

with Clip and 3 AAA Batteries

LED Rear Tail Light with Laser 5 Red LEDs with 7 flashing modes.

LED Flash Lights for use on bikes

CT2448 LED Torch

Flexible Work Light. With 3 Super bright LED's. 125mm Flexi-stem with magnetic base. Rubber on/off switch. Batteries included : 4 x LR44

2 laser lights help to warn following vehicles. 2 x AAA batteries included. 9 - 36 Hrs working time.

CT2451

with Pull Cord Charger

LED Torch with Pull Cord Charger

CT0681

CT3304 CT3436

LED Pocket Torch LED Lamp

with 6 Ultra bright LEDs Shock resistant housing with pocket clip. Low energy LEDs for prolonged battery life. Supplied with 3 x AAA batteries.

25 LED Lamp & Torch Slim Design with Dual Function. Use as a Torch or Inspection Lamp. Super bright LEDs. Requires 4 x AAA batteries.

CT3303 15 LED Light with Sensor

16 Red LEDs with 9 light Modes Magnetic. Waterproof Material : TPR Size : 110 x 35mm Battery : CR123

CT3240

CT2604

LED Tap Light

Portable Light

39 LED Triangular Worklight

LED Magnetic Lamp with 24 LEDs Includes 3 AAA Batteries.

Brightness - 11000 / 3000mcd Complete with hook and magnetic back Requires 3 x AAA batteries - not included.

CT2896

NEILSEN

Distributed by Cannon Tools Limited

Connects to household faucets, taps to give visual indication for water temperature. Will glow Blue for cold water up to 35°C and Red for hot above 35°C 2 Thread adaptors. 3 LR44 Batteries included.


Lights, Lamps & Torches CT0631

CT0632

CT0629 13” Torch Krypton Bulb

2pc Torch Set 3 D-cell / 2 AA with Krypton Bulb

Torch Krypton Super Bright Bulb Spot to Flood Beam. Sealed On/Off button. Aluminium, Water and Shock Resistant Case. Shatter proof polycarbonate lens. 2 AA Batteries included with Belt Pouch

Section 6

Spot to Flood Beam. Sealed On/Off button. Aluminium, Water and Shock Resistant Case. Shatter proof polycarbonate lens.

Spot to Flood Beam. Sealed On/Off button. Aluminium Shock Resistant Case. Shatter proof polycarbonate lens. Requires 3 D-cell Batteries ( Not included )

CT3437

CT0623 9” LED Torch

CT0630

7 Super Bright LEDs 20 hours continuous use. Aluminium Shock Resistant Case. 3 C-cell Batteries - Not included

19” Torch with Krypton Bulb Spot to Flood Beam. Sealed On/Off button. Aluminium Shock Resistant Case. Shatter proof polycarbonate lens. Requires 6 D-cell Batteries ( Not included )

CT0624 13” 6 LED Torch and Krypton Bulb Spot to Flood Beam. Sealed On/Off button. Aluminium Shock Resistant Case. Shatter proof polycarbonate lens. Requires 3 D-cell Batteries ( Not included )

Waterproof LED Work light with 7 LEDs 12V Light Plug with 3M lead. Swivel Magnetic Base.

CT2373 9 LEDTorch Aluminium Body with 3 AAA batteries

CT1822 CT2450

CT1312

3 LED Torch & Mobile Charger

30 LED Lamp 2 in 1 Rechargeable LED Work Light 60 LEDs. AC/DC Adaptor. 12V Auto lighter plug.

3 in 1 Work Lamp and Torch Requires 3 x AA batteries ( Batteries not included )

Solar and Pull Chord Powered Adaptors for popular phones 8 Hrs charge will give 3 - 4 hours of use.

CT3847 CT4193

CT2559

LED Head Torch

3W CREE LED Headlamp

4 Light Settings 12 Ultra Bright LEDs Adjustable Head Strap 3 AAA Batteries included

Super Bright CREE LED - 3 watt Zoom Focus Spot to Flood Beam 3 x AAA Bateries - included With flashing light mode

LED Head Torch with Rear Warning Light Also Detachable with Hook 110 Lumen 3W CREE LEDs 2 - 3 Hours work time Requires Batteries / Not Supplied 3 x AAA front and CR2032 rear.

www.cannontools.co.uk


Section 6

Lights, Lamps & Torches

CT1311

CT1310

CT1309

Rechargeable LED Work Light with 28 LEDs. 230V AC/DC Adaptor 12V Auto lighter plug. Re-charge time 1.5Hrs for 5 - 6 Hrs use

Rechargeable LED Work Light with 60 LEDs.

LED Work Light with 60 LEDs

230V AC/DC Adaptor. 12V Auto lighter plug. Re-charge time 1.5Hrs for 5 - 6 Hrs use

12V / 230V adaptor / 50Hz / 6W / 500MA Swivel Hanging Hook

CT1805

CT2965

CT2964

21+3 LED Work Light 12V LED Work Lamp with 30 LEDs 12V Vehicle Plug. 230V Charger Power : 1.5W. Size : 6 x 24cm

CT1499

CT1500

Rechargeable Work Light with 5 to 6 Hrs Usage. Anti-Impact Rubber Housing. 230V Adaptor and Charger. 360 Degree Swivel Hanging Hook.

Distributed by Cannon Tools Limited

28+5 LED Work Light Super Bright energy saving LEDs. Max. 15000MCD. 100000 hrs LED life. Unique rotating design with ABS body. Requires 3 x AAA Batteries not included.

CT1742

Cordless 30 +6 LEDs Inspection Lamp

Cordless 30 LED Inspection Lamp

NEILSEN

Super Bright energy saving long life LEDs Max. 15000MCD. LED life more than 100000 hrs. Rotating design from Red to White light. ABS body. Requires 3 x AA Batteries ( not included )

Lithium battery charger Output - 8.4V 1.5A DC Charger 12V cigarette plug charger 100-230V Adaptor 360 Degree Swivel Hanging Hook

30 LED Work Lamp Telescopic Rechargeable Work Light 30 x 5mm super white LEDs Luminance - about 12000MCD Lifetime of LED up to 100000 hours. Battery - 3.7V 1600MA with harging time - 4 hours


Lights, Lamps & Torches CT1643

CT3440

Section 6

Flexi-Cobra style 24 LED work light 800mm Long with 11000Mcd LEDs. Requires 6 AAA Batteries ( Not Supplied ) Bendable to just about any position.

230V Work Lamp Tube Lamp with Bonnet Fitting Extra thick shatterproof housing Heavy duty swivel hook Aluminium telescopic bar expands to 1.9M Complete with 3 pin plug

CT0783

CT0784

12V - 24W Incandescent Inspection Lamp

12V 36 LED Inspection Lamp

5M Cable with Heavy Duty Clamp. Rubber Coated Non-Scratch Ends. Waterproof Lens Cover.On-Off Switch.

CT3435

CT1844

LED Spotlight

5M Cable with Heavy Duty Clamp and Rubber Coated Non-Scratch Ends. Waterproof Lens Cover. On-Off Switch.

CT1392

with hand powered charging. 10 LEDs Spotlight. 6V 2.3AH batteries. AC/DC Adaptor and Vehicle Plug.

CT4191

Warning Light Revolving Yellow Magnetic Warning Light

Waterproof 48 LED Lamp

60 SMD Warning Light

Up to 3 hours continuous use. IP66 grade lamp can be washedwith water. Continuous light when powered by adaptor.

CT4138

CT3008

48 LED Warning Light 0.5W SMD LED Flash Control : 3 Ways Permanent Installation with bolts, or use temporarily with magnetic base. Complies with RoHS Directive - 2011/65/EU

LED Torch & Automotive Emergency Tool Bright LED Torch. Red Flashing LED Beacon. Seat Belt Cutter. Glass Breaker with Magnetic Base. Requires 2 x AA Batteries not included

Amber Beacon Warning Light with Mounting Bracket Size : 245 x 127mm Power : 12V DC / 12W EMC approved / ECE R10 Meets IP56 standards 4â&#x20AC;? Mounting Bracket with Rubber Boot

CT3434

24 LED Safety Light with various flash sequence. Water / Oil and Shock Resistant. 12V Lighter socket plug and 3.5M lead. Requires 4 AA Batteries ( Not included ).

www.cannontools.co.uk


Section 6

Lighting & Power Accesorires

CT4196

CT1689

CT3074

230V LED & BLUETOOTH Audio Work Lamp

Electrical Plug 230 Volt / 16 Amp

230V / 50Hz 1200LM Total Flux IP44 Protection

110V Outlet Adaptor

CT3076 Electrical Plug

3 Way Splitter

230 Volt / 32 Amp

CT1754

CT1543

230V Outlet Adaptor

CT3075

3 Way Splitter

Electrical Socket 230 Volt / 16 Amp

230V LED Work Lamp With Telescopic Stand 230V / 40W 50-60Hz SMD LEDs with 40M depth and 120 degree spread. Stand Max. Height : 1800mm

CT0434

CT3077 CT1403

Electrical Socket 230 Volt / 32 Amp

110V 25M Twin Socket Cable Reel

230V Work Lamp

CT2898 Hook-Up Adaptor Lead

Twin 500W Halogen Floodlights with Telescopic Stand

230V UK Plug Cable Reels 230V - 4 Socket CT1401

25M

CT1402

50M

CT2897

Trailing Socket Lead CT1743

2340V with UK Socket

230V LED Work Light

CT4159

127 Super Bright LEDs with 16CD Luminance. Telescopic Tri-pod Stand up to 1780mm high. 2200Ma Battery. 3hr Charging Time. 100000 Hrs Lifetime.

230V Twin Socket Adaptor with 5V USB charging points Extension Leads 230V - Single Socket

USB Point

NEILSEN

Distributed by Cannon Tools Limited

CT2460

5M

CT2461

10M


Petrol Generators & Spares CT1900

Section 6

CT1706

Petrol Generator

Petrol Generator

with Copper Coil

with Aluminium Coil

Rated Voltage : 110 - 240V Rated Output : 2.8 KVA Dc Output : 12V 8.3A Engine : 200cc 6.5hp Single Phase Fuel Capacity :15 litres Oil Alert System Recoil Starting System Same specification as CT1900

CT2861

Fuel Tap

CT2862

CT2860

Carburettor

Avr

for Generators CT1706 and CT1900

for Generators CT1706 and CT1900

for Generators CT1706 and CT1900

CT1846

CT1706-1 Spare Carbon Brushes Generator CT1706 and CT1900

CT2069

Petrol Generator

Replacment Pull Cord for Petrol Generators

Check out the Website for full product information www.cannontools.co.uk

Donâ&#x20AC;&#x2122;t forget to refresh your browser or clear your internet history to see the latest products and changes.

Rated Voltage : 110V - 240V Rated Output : 5.0 KVA Max Output : 6.5 KVA Dc Output : 12V / 8.3A Engine : 389cc / 8.3 / 9.0 hp Rated speed : 3000 / 3600rpm Fuel Capacity : 25 litres Electric Start Oil Alert System

CT3784

Petrol Generator - 7hp Mains voltage : 115V - 230V 12V/8.3A DC output Frequency : 50Hz Rated output : 2600W Max. output : 2800W Displacement : 208cmÂł Operating hours : 10.3hours Fuel tank capacity : 15L Outdoor noise : 96dB(A) Recoil Starting System Weight 43kg With Wheels

www.cannontools.co.uk


Section 6

Diesel Generators & Spares

CT3998

CT3999

Diesel Generator

Diesel Generator

5Kw Silent Type with ATS Rated Power : 4.6Kw Voltage : 230V / 115V / 50HZ DC Output : 12V / 8.3A Rated current : 21A Rated speed : 3000 rpm Power factor (cosf) : 1

5Kw Silent Type with ATS Rated Power : 4.6KW Voltage : 230V / 380V/ 50Hz DC Output : 12V / 8.3A Rated current : 7.9A Rated speed : 3000 rpm Power factor (cosf) : 0.8

Single cylinder 4 stroke engine 418cc - 86mm Bore / 72mm stroke Fuel capacity : 30 litres Continuous use : 15Hrs Electric start 5Kw Silent Type with ATS

Single cylinder 4 stroke engine 418cc - 86mm Bore / 72mm stroke Fuel capacity : 30 litres Continuous Use : 15Hrs Electric Start 5Kw Silent Type with ATS

CT0012

CT0405

Diesel Generator

Diesel Generator

Rated Power : 4.6 KW Max. output : 6.3 / 7.34 KW Rated voltage : 230V / 50Hz DC output : 12V / 8.3A Rated current : 8.7 Rated speed : 3000 / 3600 rpm Power factor :(cosφ)0.8 406cc, Single cylinder, 4-stroke Bore x stroke : 86 x 70 Fuel Capacity : 15 litres Continuous Use : 15Hrs Weight : 169.5kg Size : 965L x 565W x 725H Recoil Start / Optional Electric Start

Continuous output : 5.7 / 6.6 KW Rated Power : 4.6 KW Max. ouput : 5.5 KW Rated voltage : 230V / 50Hz DC output : 12V / 8.3A Rated current : 19.6 20.8/41.7A Rated speed : 3000 rpm Power factor :(cosφ)1 406cc, Single cylinder, 4-stroke Bore x stroke : 86 x 70 Fuel Capacity : 15 litres Weight : 168.5kg Size : 965L x 565W x 725H Recoil Start / Optional Electric Start

CT0405-1

Air Filter

CT0405-2

Fuel Pump

CT0405-11

CT0405-7

Spare Oil Alert Sensors Bag of 25 for Generator CT0405

CT0405-3

Spare Starter Motor for Generator CT0405 CT0405-8

Spare AVR Single Phase

Injector

CT0405-9

for Generator CT0405

CT0405-4

Oil Filter

CT0405-5

Spare Battery ( & CT0012 )

Spare Voltage Regulator for Generator CT0405

CT0405-6 CT0405-10 Spare Oil Controllers

Spare Carbon Brushes

Bag of 20 for Generator CT0405

Bag of 20 for Generator CT0405

NEILSEN

Distributed by Cannon Tools Limited

Some items may not have been available for photography when compiling this catalogue so log onto the cannon.co.uk website to get more up-to-date information. Don’t forget to refresh you internet browser occasionally !


Diesel Generators & Power Inverters See Section 5 for Welding Gear Page 156

or check out the Website for full product information www.cannontools.co.uk

Section 6

CT1788 Diesel Generator & Welder Continuous output : 5.7 / 6.6 KW Rated Power : 2.5 (4.6) KW Max. output : 6.3 / 7.34 KW Rated voltage : 230V / 50Hz Rated current : 11A Rated speed : 3000 / 3600rpm Power factor :(cosφ)1 406cc, Single cylinder, 4-stroke Bore x stroke : 86 x 70 Fuel Capacity : 15 litres Welding Voltage : 25-30V / ( 55-65V idle ) Rated Current for Welding : 160 - 180A Welding Load Lasting Rate : 50% Weight : 165kg Size : 950L x 550W x 770H Recoil Start / Optional Electric Start

CT1848

CT2020

Diesel Generator

Diesel Generator

Continuous output : 3.4 / 4.4 KW Rated Power : 3 KW Max. output : 4.0 / 4.9 KW Rated voltage : 230V / 50Hz DC output : 12V / 8.3A Rated current : 8.3A Rated speed : 3000 rpm Power factor :(cosφ)1 Engine : 296cc 4-stroke Bore x stroke : 78 x 62 Fuel Capacity : 15 litres Weight : 96kg Size : 745L x 520W x 600H Recoil Start with Optional Electric Start

Continuous output : 2.5 / 2.98 KW Rated Power : 2 KW Max. output : 2.8 / 3.36 KW Rated voltage : 230V / 50Hz DC output : 12V / 8.3A Rated current : 8.3A Rated speed : 3000 rpm Power factor :(cosφ)1 211cc, Single cylinder, 4-stroke Bore x stroke : 78 x 62 Fuel Capacity : 15 litres Weight : 75kg Size : 705L x 520W x 580H Recoil Start with Optional Electric Start

CT1398

CT1399

2000W Power Inverter 2 in 1

3500W Power Inverter

Run any electrical appliance up to 2000W from your car truck RV Boat etc. Full input and out put protection. Automatic thermal shut down. Overload protection. Extra surge capacity. Low battery alarm / shut off. Auto restart function. Built-in cooling fan. Converts Dc 12V to AC 230V. Frequency - 50Hz plus 5 percent. Output waveform - modified sine wave

Converts DC 12V to AC 230V Frequency - 50Hz plus 5 percent. Full input and output protection. Automatic thermal shut down. Overload protection. Extra surge capacity. Low battery alarm / shut off. Auto restart function. Built-in cooling fan. Output waveform - modified sine wave. Run any electrical appliance up to 3500W from your car truck RV Boat etc.

CT1983

Power Inverter 800W / 1200W 12V DC to 230V AC Power Inverter Output Voltage Approx. 230Vrms at 60Hz Output Current : 7.3 amps Continuous Output : 800 Watts Peak Output : 1200 Watts Input Voltage : 10.6 to 13.5V DC Battery Clip Cables with Short Circuit and Overload Protection

www.cannontools.co.uk


Section 6

Demolition Hammers

CT0903

CT0903-1

CT0903-2

CT0903-3

Electric Hammer Chisel 230V 230V - 50Hz

Hammer Chisel Handle

Hammer Chisel Carbon Brush

CT0904-1

CT0904

CT0904-2

Hammer Chisel Carbon Brush Holder CT0904-3

Electric Hammer Chisel 110V 110V - 60Hz

Hammer time : 1400rpm approx With Point and Flat Chisels, Hex key, Oil spanner and Oil Pot.

Hammer Chisel Handle

CT2806

CT4001

Hammer Chisel Carbon Brush

Hammer Chisel Carbon Brush Holder

230V Demolition Hammer Voltage/Frequency : 230V / 50HZ Rated Input : 2100W Impact Rates :1600/Bpm Impact joules : 85J Full Accessories : Flat & Point Chisel Oil Pot, Hex Wrench and Wrench

230V Demolition Hammer 230V - 50Hz - 1500W Overall Beat Time : 1000-1900 bpm Joules : 25J. Weight 10kg Variable Speed and Lock-on Switch. High Performance and Reliability. Auto Stop carbon brushes for extended motor life. Supplied with 2 Chisels : Point and Flat.

CT4002 110V Demolition Hammer Voltage/Frequency : 110V / 60HZ Rated Input : 2100W Impact Rates :1600/Bpm Impact joules : 85J Full Accessories : Flat & Point Chisel Oil Pot, Hex Wrench and Wrench

CT2805 230V Demolition Hammer 28mm Hex Shank 230V - 50Hz - 2200W Overall Beat Time : 950bpm Joules : 75J Weight 32kg

CT2043 PETROL Demolition Hammer 52cc / 2.4hp Engine Fuel Tank Capacity : 1.7L Max torque and speed : 2.5Nm at 5000rpm Fuel Consumption Rate : 0.8 L/h Max power and speed : 1700W / 6500rpm Impact Frequency : 700-1500 bpm Impact Energy : 20 - 55J With Flat and Tine Chisels

NEILSEN

Distributed by Cannon Tools Limited


Hammer Chisels & Mixer Bars CT3694

Section 6

CT2814

CT2891

CT3695

3pc SDS Chisel Set

3pc SDS Chisel Set

32mm SDS Chisel

17mm Diameter To fit CT0700 and CT0701 SDS Hammer Drills

17mm Diameter To fit CT0700 and CT0701 SDS Hammer Drills

CT2807

CT0240

25mm SDS Chisel 250mm Long

250mm Long

CT3696 40mm SDS Chisel 250mm Long

3pc Hammer Chisel Set

4pc SDS Chisel Set with Point, 20 and 40mm Flat and Guage.

To fit CT0903 and CT0904 Electric Hammers

CT3697 50mm SDS Chisel

CT0949

CT0950

110V

230V

250mm Long

CT3698 75mm SDS Chisel 250mm Long

CT1174

Mortar Mixer

Mortar Mixer

110V / 60Hz / 1200W Speed : 100 - 700rpm With Mixing Paddle

230V / 50Hz / 1200W Speed : 100 - 700rpm With Mixing Paddle

CT1173

CT1434 Mixer Bar for 0949 and 0950

Paint Mixer

Paint Mixer

400 x 85mm Ø with Hex Steel Shaft. Fits 3/8” or Larger Drill Chuck. Maximum 900rpm.

600 x 100mm Ø with Hex Steel Shaft. Fits 3/8” or Larger Drill Chuck. Maximum 900rpm.

www.cannontools.co.uk


Section 6

Power Tools & Accessories

CT0700

CT1622

230V SDS Rotary Hammer Drill Kit Frequency : 50Hz Rated : 1200W Drill Capacity : 32mm No Load Speed : 850rpm Impact Rates : 0-4200/Bpm Impact joules : 5.5J

This Kit includes : 3 SDS Drills 2 SDS Chisels Standard Chuck SDS Adaptor

3pc Socket Adaptor Set for Power Tools 1/4” . 3/8” . 1/2”Dr

CT0701

CT3236

110V SDS Rotary Hammer Drill Kit Frequency : 60Hz Rated : 1200W Drill Capacity : 32mm No Load Speed : 850rpm Impact Rates : 0-4200/Bpm Impact joules : 5.5J

This Kit includes : 3 SDS Drills 2 SDS Chisels Standard Chuck SDS Adaptor

3pc SDS Plus Adaptor Set 1/4” . 3/8” . 1/2”Dr

For use with SDS Plus Fitting Drills

CT0721

CT0722

SDS Rotary Hammer Drill 110V

SDS Rotary Hammer Drill 230V

38mm / 230V / 1050W Frequency : 60Hz Max drilling diameter: 38mm No-load speed: 400 rpm (approx.) Hammer time: 4000 rpm (approx.) Accessories include : SDS Drill and Chisel

38mm / 230V / 1050W Frequency : 50Hz Max drilling diameter: 38mm No-load speed: 400 rpm (approx.) Hammer time: 4000 rpm (approx.) Accessories include : SDS Drill and Chisel

CT1764

CT1763

110V Demolition Hammer

230V Demolition Hammer

30 x 410mm Pointed & Flat chisels

30 x 410mm Pointed & Flat chisels

Voltage/Frequency : 110V / 60Hz Rated Power : 2100W Max impact Rates : 1600bpm Impact joules : 85J Net Weight : 22.5kg 5M VDE Cord

Voltage/Frequency : 230V / 50Hz Rated Power : 2100W Max impact Rates : 1600bpm Impact joules : 85J Net Weight : 22.5kg 5M VDE Cord

NEILSEN

Distributed by Cannon Tools Limited


Power Tools & Accessories CT0402

CT0403

CT1808

Keyless Drill Chuck

Keyless Drill Chuck

Keyless Drill Chuck

3/8" x 24 UNF

1/2" x 20 UNF

13mm with SDS Adaptor

CT0083

CT3737

Section 6

CT0084

Chuck & SDS Adaptor

SDS Adaptor

1.5 - 13mm x 20 UNF

CT0999

CT3791 6.5mm / 1/4” Keyless Chuck with 1/4 Hex Shank

CT3823

Chuck and Hex Bit Adaptor 2 - 13mm Keyless Chuck with Quick Change Hex Adaptor

CT3824

Drill Attachment 1.5mm - 10mm capacity For hand or power drills. Right or left hand use

Drill Vices

Pillar Drill / Bench Drill - 13mm Motor : 230V / 50Hz Power : 350W

CT0331

3” / 75mm

CT0332

4” / 100mm

Pillar Drill / Bench Drill - 16mm Motor : 230V / 50Hz Power : 500W

CT0016 Hand Drill

5 speed Motor No-load Speed : 1450rpm Chuck : B16 / 1.5-13mm Spindle Taper : B16 Max. Drilling Depth : 50mm Table Size : 160 x 160mm Table Tilting Range : 0 -45 degrees Base Size : 290 x 190mm Column Diameter : 46mm Distance Spindle / Column : 104mm Distance Spindle / Table : 200mm Distance Spindle / Base : 290mm Overall Height : 580mm Gross / Net Weight : 15 / 16kg

16 speed Motor No-load Speed : 1450rpm Chuck : B16 / 3 - 16mm Spindle Taper : MT2 Max. Drilling Depth : 80mm Table Size : 290mm Table Tilting Range : 0 - 45 Degrees Base Size : 250 x 420mm Column Diameter : 70mm Distance Spindle/Column : 170mm Distance Spindle / Table : 450mm Distance Spindle / Base : 640mm Overall Height : 980mm Gross / Net Weight : 43 / 45kgs

CT3155

Mini Hand Drill with Adjustable Chuck Plastic hand drill used for wire twisting and drilling

www.cannontools.co.uk


Section 6

Cordless Power Tools

CT3140

CT3821

3.6V

3.6V

Cordless Screwdriver

Auto-Load Cordless Screwdriver

3.5Nm Torque with 22 settings . 1.3Ah Lithium Battery and Work Light. Quick release bit holder. Forward and Reverse action.

3.6V Li-ion Battery, 1300mAh 3 hour use. with Bit & Drill Set. LED Work Light.

CT1979

CT1982

9.6V With 2 Batteries

12V With 2 Batteries

CT1787

18V NiCd

Cordless Drill 10mm Keyless chuck. No-load speed 0 - 580min 20 torque settings. Noise Level - 75 - 86 dB/A Charger - 230V / 50Hz / 14W. Charge Time 3 - 5 Hr. Charger Output - 18V / 400mA Weight - 1kg with 2 screwdriver bits in handle.

CT0435

Cordless Drill

Cordless Drill

10mm Keyless chuck for tool-free bit changes. 22 stage adjustable clutch for precise torque settings. Variable speed for increased power and control. Fan-cooled motor for long lasting motor life.

10mm Keyless chuck. 22 stage adjustable clutch for precise torque settings. Variable speed for increased power and control. Fan-cooled motor for long lasting motor life

CT0585

CT2297

24V With 2 Batteries

Heavy Duty

Cordless Drill

18V 18V

2 Speed Control Impact Rate : 0-5600/0 - 17600min. Keyless Chuck : 2 - 13mm. Torque Settings : 16 plus 1. With 2 Batteries and Charger. Drills and Screwdriver Bits.

CT0435-2

Cordless Drill Kit 2 Drills with UK Plug Cordless Drill : 0.8 - 19mm Impact Drill : 2 - 13mm Forward / Reverse and Hammer Action Torque and Speed Adjustment 1 Hour quick recharge with Drill Accessories

24V Battery for CT0435

Cordless Drill Kit 2 Drills with Euro Plug

CT1727 24V Battery Charger

Large Battery for CT0585 and CT2297

Cordless Drill: 0.8 - 19mm Cordless Impact Drill: 2-13mm with Hammer Action. Torque and Speed Adjustment 1 Hour quick recharge with Drill Accessories

CT1726

CT3277

18V Battery Charger

Small Battery for CT0585 and CT2297

CT3281

18V

18V

for CT0585

NEILSEN

Distributed by Cannon Tools Limited

for CT0435

CT0582 24V Battery for CT0081


Cordless & Wired Power Tools CT3142

Section 6

CT0090

18V 101pc Cordless Drill & Driver Kit Keyless Chuck - 10mm No-load Speed - 0-400/0-1100rpm Torque Settings - 19 plus 1 Variable Speed and Reverse No-load Speed - 0-2200rpm Maximum Torque - 120Nm Quick Chuck - 1/4â&#x20AC;? / 6mm Li-ion Batteries - 18V / 1300mAH 1 Hour Quick Charge

CT3142-1 18V Battery

Electric Drill Rated Voltage : 230 Volt Rated Frequency : 50Hz Rated Input Power : 280W No-Load Speed : 0 - 750 rpm Jaw Capacity : 10mm

CT3142-2 18V Battery Charger for CT3142

CT2728 Impact Drill 230V

for CT3142

CT3971

CT3822

18V

18V

Cordless Drill 2 Speed Gear Box 13mm Metal Keyless Chuck 21+1 Torque Settings with 50Nm Max Torque with 2 Lithium-Ion Batteries and Charger

Frequency : 50Hz Input Power: 600W Chuck Size : 13mm No-Load Speed : 3000 rpm With Adjustable Handle and Chuck Key

CT2729 Impact Drill 230V

Forward / Reverse Button Variable Speed Trigger LED work light

Cordless Drill 10mm keyless chuck 1.5AH Li-ion battery Maximum Torque - 35Nm Torque Setting - 21 + l No-load Speed - 0 - 400/0 - 1500/min Soft grip handle with LED working light Supplied with 2 battery packs. 1 hour fast charger 70pc Accessory Kit Box Included with assorted Drills and Screwdriver Bits

CT0584

CT3754

18V Heavy Duty Cordless Drill

24V With 2 Batteries

With LED light Keyless chuck : 13mm 18V 1.5Ah Li-ion battery Speed : 0-440 / 0-1650/min Impact rate : 0-9600 / 0-32000bpm 21 Torque settings + Reverse Maximum Torque - 38Nm Includes 1 hour fast charger

Cordless Dril

Frequency : 50Hz Input Power: 800W Chuck Size : 13mm No-Load Speed : 3000 rpm With Adjustable Handle and Chuck Key

Chuck capacity - 2-13mm 24V.1.3 Ah Li-ion battery Two Speed - 0-400 / 0-1400/min Torque Setting - 23 + 1 Maximum Torque - 35Nm With 2 x 1.3AH batteries and 1Hr fast charger LED Light / Soft grip handle with spindle lock function

www.cannontools.co.uk


Section 6

Drill Bits

CT2360

CT3699

CT3726

Drill & Drive System

Drill & Driver Set with Quick Change Chuck Drills : 2.5, 2.8, 3mm / Bits : Ph1. 2. 3

Chuck adaptor that allows the drill bit to remain in the drill while using the bit adaptor. With Flat : 4, 5, 6mm / Hex : 3, 4, 5mm / Ph1, 2, 3 Bits.

CT2361

19pc HSS Drill Set Sizes : 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10mm

CT1813

5pc HSS Drill Set

19pc Drill Set

1/4” hex shank 1.5, 2.5, 3.2, 4.0, 4.8mm Titanium Coated

118° split point Titanium Coated 1.0 to 10mm in 0.5mm increments.

CT2341 HSS Drill Sets 13pc HSS Drill Set

CT2972

1.5mm Drill Set - 10pc

1/4” hex shank Sizes : 1.5 - 6.5mm Titanium Coated

CT2973

2.0mm Drill Set - 10pc

CT2974

2.5mm Drill Set - 10pc

CT2975

3.0mm Drill Set - 10pc

CT3299

CT2976

3.2mm Drill Set - 10pc

CT2977

3.5mm Drill Set - 10pc

CT2978

4.0mm Drill Set - 10pc

CT2979

4.5mm Drill Set - 10pc

CT2980

4.8mm Drill Set - 10pc

CT2981

5.0mm Drill Set - 10pc

CT2982

5.5mm Drill Set - 10pc

CT2983

6.0mm Drill Set - 10pc

CT2984

6.5mm Drill Set - 10pc

CT2985

7.0mm

Drill Set - 5pc

CT2986

7.5mm

Drill Set - 5pc

CT2987

8.0mm

Drill Set - 5pc

CT2988

8.5mm

Drill Set - 5pc

CT2989

9.0mm

Drill Set - 5pc

CT2990

9.5mm

Drill Set - 5pc

CT2991

10.0mm

Drill Set - 5pc

CT2992

10.5mm

Drill Set - 5pc

CT2993

11.0mm

Drill Set - 5pc

CT2994

12.0mm

Drill Set - 5pc

CT2995

13.0mm

Drill Set - 5pc

13pc HSS Drill Set Sizes : 1.5 - 6.5mm

CT0513 13pc HSS Drill Set 2.0 to 8.0mm in 0.5mm increments

NEILSEN

Distributed by Cannon Tools Limited

Counter Display CT0995 25pc HSS Drill Set 135° split point 1mm to 13mm in 0.5mm increments.


Mixed Drill Bit Sets & Step Drills CT0094

CT0106

Section 6

CT0414 3pc HSS Step Drill Set Titanium Coated 4 - 12mm 4 - 20mm 4 - 32mm

8pc HSS Drill Set with Reduced Shank Sizes : 13, 14, 15, 16, 18, 20, 22, 25mm Shank Diameter : 1/2in. approx. 12.7mm Standard 118 degree point for use in Metal and Plastic and Wood.

99pc HSS Drill Set

CT0095

CT2334

Sizes : 1.5 to 10mm. 118 degree point. High speed steel with 2 cutting edges For drilling metal / wood and plastic.

CT1926 3pc HSS Step Drill Set Titanium Coated 4 - 12mm 4 - 20mm 4 - 32mm

CT3855 19pc Drill Set HSS Titanium Coated Drills and TCT Masonry Drills HSS - 1 to 7mm 0.5mm increments TCT - 4, 5, 6, 7, 8, 9mm in a Robust Case.

108pc HSS Drill Set Sizes : 1 - 10mm in 0.5mm increments Masonry Drills : 4 - 8mm Wood Drills : 5 - 10mm

CT0440 CT1281

3pc HSS Step Drill Set Titanium Coated - 1/4in. Hex shank. 3/16 - 1/2”, 1/4- 3/4”, 1/8 - 1/2”

CT4214

24pc Drill & Bit Set HSS : 2, 3, 4, 5, 6, 7, 8mm Masonry : 4, 5, 6, 7, 8mm Wood : 4, 5, 6, 7, 8mm Flat 4. 5. 6mm. Ph 1, 2. Pz 1, 2 with Magnetic Extension.

CT2335

170pc Hss Drill Set Sizes : 1.0 to 10mm in 0.5mm increments.

CT1279 115pc HSS Drill Set 135° Split Point 1/16” - 1/2” 0.228” - 0.400” 0.234“ - 0.413”

32pc Drill & Bit Set

3pc HSS Spot Weld Cutter Set Sizes : 6.5, 8.0, 10.0mm Ø with 5% Cobalt content and Titanium Coated.

CT2285 9pc HSS Spot Weld Cutter Set Interchangeable Cutters 5/16” and 3/8” 1/4” Shafts

Titanium HSS : 1/8. 5/32. 3/16. 7/32. 1/4. 5/16. 3/8” Titanium Flat Wood Drills - 3/8. 1/2. 5/8. 3/4. 7/8. 1” Wood Drills - 5/32. 3/16. 1/4. 5/16. 3/8” Masonry Drills - 5/32. 3/16. 1/4. 5/16. 3/8” Holesaws and Arbor Magnetic Bit Holder with Flat,Phillips, Pozidiv Bits.

www.cannontools.co.uk


Section 6

Wood Drills & Countersinks

CT0650

CT0289

CT3652

8pc Wood Drill Set

9pc Wood Drill Set

Sizes : 3, 4, 5, 6, 7, 8, 9, 10mm

Sizes : 5, 6, 8, 10mm with Drill Saw : 6 x 85mm Wood Rasp : 56mm, Countersink : 12mm and 3 Rotary Burrs

7pc Drill Set with Integral Countersink Sizes : 5, 6, 7, 8, 9, 10, 12mm

CT3729

CT0828

CT0644

3pc Countersink Bit Set

3pc Countersink Set - 1/2”, 5/8”, 3/4”

CT2475

CT2458

4pc Countersink Set

5pc Countersink Set Sizes : 8, 10, 12, 16, 19mm. Titanium Nitride coated for longer life.

CT3651

Sizes : 12, 16, 19mm with 1/4” Shank

CT0422

Bradawl & Gimlet Set 3pc Wood Drill Set

7pc Wood Drill Set

Sizes : 8, 10, 12mm x 300mm

Sizes : 4, 5, 6, 7, 8, 10, 12 x 300mm

An essential part of all good woodworking tool kits. For starting off holes before drillling to avoid slipping.

CT0344 CT0288

CT1799

1/4” Hex Shaft

1/4” Hex Shaft

6pc Flat Wood Drill Set

7pc Flat Wood Drill Set

Sizes : 10, 12, 16, 18, 20, 25mm

Sizes : 10, 13, 16, 22, 25, 32, 40mm Length - 150mm

CT0411

CT1800

Titanium Coated

1/4” Hex Shaft

10pc Flat Wood Drill Set - 150m Long Sizes : 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/4” 1/4” Hex shaft with 300mm Extension Bar.

CT3857

With Quick Change Adaptor

13pc Flat Wood Drill Set Sizes : 6, 8, 10, 12, 13, 14, 16, 18, 19, 20, 22, 24, 25mm

NEILSEN

Distributed by Cannon Tools Limited

14pc Flat Wood Drill Set Sizes : 6, 8, 10, 12, 13, 14, 16, 17, 18, 19, 20, 22, 25mm

3pc Hinge Drill Set Drill sizes : 7/64 - 9/64 HSS drills with 1/4” Shank Used for drilling pilot holes for hinges. For drilling through metal / plastic and wood.


Auger Drills & Hole Cutting CT3300

CT3301

Section 6

CT3108 SDS Wood Drill Adaptors 3” / 80mm Long Extension For 6mm Hex Shank Wood Drill Bits CT3109

4pc Auger Bit Set

5pc Auger Drill Set

Sizes : 8, 12, 16, 24mm x 600mm long

Sizes : 6, 8, 10, 12, 14mm x 230mm long

CT0292

SDS Wood Drill Adaptors 12” / 300mm Long Extension For 6mm Hex Shank Wood Drill Bits

CT0645 SDS CT3110

5pc Auger Dill Set

5pc SDS Auger Dill Set

Sizes : 10, 13, 19, 22, 25mm

Sizes : 10, 13, 19, 22, 25mm

2pc Hole Cutter 22 - 76mm Hex Shank Expansive Bit

CT0647

CT0646

CT1055

4pc Square Auger Dill Bit Set

6pc Square Auger Dill Bit Set

Sizes : 6, 10, 13, 16mm

Sizes : 6, 8, 10, 12, 14, 16mm

CT0648

CT0649

Hole Cutter Kit 6pc Left Cutting Square Countersink Bit Set Sizes : 6, 8, 10, 12, 14, 16mm

6pc Right Cutting Square Countersink Bit Set Sizes : 6, 8, 10, 12, 14, 16mm

for Ceiling Lighting Adjustable assembly with plastic cowl cuts 40 - 200mm Diameter 2 HSS Cutting Blades. 8mm Auger Drill. 5 Masonry Drills 5 Wood Drills. 3M Tape Measure. Carpenters Pencil

www.cannontools.co.uk


Section 6

Routers, Router Bits & Hole Cutting

CT0800

230V Router 1/2” Input Power : 1500W / 50Hz Free Speed : 6000 - 2600/min Noise : 93.5 / 106.5db(A) Weight : 5.5kgs

CT0957

CT0504

CT0503

12pc 1/4” Shank Router Bit Set

35pc 1/4” Shank Router Bit Set

Concise set of Classic router Bits.

Comprehensive set of Classic router Bits.

CT0505

CT0550

12pc 1/2” Shank Router Bit Set

35pc 1/2” Shank Router Bit Set

Concise set of TCT Tipped Classic router Bits.

Comprehensive set of TCT Tipped Classic router Bits.

CT0291

CT0290

5pc Forstner Bit Set

16pc Forstner Bit Set

230V 100mm Biscuit Jointer

In a Plastic case as below

Voltage : 230V / 50Hz Input power : 900W No-load speed : 11000/min Protection class II Weight : 3.5 kg

Sizes : 10 - 35mm

Sizes : 1/4”- 17/8” / 6 - 54mm

CT0958 CT0488

8pc Wood Plug Cutting Set Sizes : 1/4", 3/8", 1/2", 5/8"

CT0642

11pc Wood Plug Cutting Set Metric :19, 22, 25, 29, 32, 41, 48, 54, 60, 73, 85mm

110V 100mm Biscuit Jointer

CT0641

Voltage : 110V / 60Hz same spec. as above.

CT0643

CT0640

6pc Wood Plug Cutting Set With 6mm Hex Shafts 3/8 | 1/2 | 5/8 | 3/4 | 7/8 | 1”. 10 | 12.5 | 15.5 | 18 | 22 | 25 mm

NEILSEN

Distributed by Cannon Tools Limited

5pc Deep Wood Plug Cutting Set

6pc Forstner Bit & Deep Plug Cutting Set

Sizes : 15, 20, 25, 30, 35mm

Sizes : 15, 25, 35mm


Hole Saws & Hole Saw Sets CT0899

Section 6 Hole Saws Bi-Metal CT2152 CT2153 CT2154 CT2155 CT2156 CT2157 CT2158 CT2159 CT2160 CT2161 CT2162 CT2163 CT2164 CT2165 CT2166 CT2167 CT2168 CT2169 CT2170 CT2171 CT2172 CT2173 CT2174 CT2175 CT2176

4pc Hole Saw Set Sizes : 32, 38, 44, 53mm with 6mm Shank Pilot Drill

CT2179

14 - 32mm

CT2180

33 - 127mm

Hole Saw Arbors with Hex Shank

CT0348

8pc Hole Saw Set

14 16 19 20 22 25 29 32 35 38 40 41 44 51 54 57 64 67 70 73 76 86 102 127 152

mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

CT0349

CT0350

11pc Hole Saw Set

16pc Hole Saw Set

Sizes : 19 - 64mm

Sizes : 19 - 127mm

CT2177

CT2178

9pc Plumbers Bi-Metal Hole Saw Kit

9pc Electricians Bi-Metal Hole Saw Kit

Sizes : 19, 22, 29, 38, 44, 57mm Includes 2 Arbors and a mandrel adaptor. For cast iron, stainless steel alloyed and.non alloyed aluminium bronze, copper, PVC, acrylic and wood. Variable pitch m3 HSS steel teeth.

Sizes : 18, 20, 25, 32, 40 and 51mm Includes 2 Arbors and a mandrel adaptor. For cast iron, stainless steel alloyed and.non alloyed aluminium bronze, copper, PVC, acrylic and wood. Variable pitch m3 HSS steel teeth.

Sizes : 64 -127mm

CT0900

9pc Hole Saw Set Sizes : 50, 60, 65, 72, 75, 86mm Ideal for Ceiling Down Lights

www.cannontools.co.uk


Section 6

Glass, Masonry & SDS Drill Bits

CT2379

CT2459

CT0293

5pc Masonry Drill Set Sizes : 4, 5, 6, 8, 10mm

4pc Glass Drill Set Carbide Tips Sizes : 3, 5, 6, 8mm for mirrors

8pc Masonry Drill Set Sizes : 3, 4, 5, 6, 7, 8, 9, 10mm

CT2998

CT2999 CT3232

5pc SDS Plus Drill Bit Set Sizes : 5, 6, 8, 10, 12mm

8pc SDS Drill Bit Set

CT0996

Sizes : 5, 6, 8, 10, 12mm x 110, 160 and 210mm Long

3pc SDS Drill Bit Set Sizes : 12, 16, 25mm x 450mm Long

CT0287 CT2313 4pc Masonry Drill Set Sizes : 6, 8, 10, 12 x 300mm

12pc SDS Drill & Chisel Set

Masonry Drills CT3972

8mm x 400mm Long

CT3973

10mm x 400mm Long

CT3974

12mm x 400mm Long

CT3975

14mm x 400mm Long

CT3976

16mm x 400mm Long

CT3977

18mm x 400mm Long

CT3978

20mm x 400mm Long

CT3979

22mm x 400mm Long

CT3980

24mm x 400mm Long

NEILSEN

Distributed by Cannon Tools Limited

Sizes : 5, 6 x 110mm. 6, 8, 10 x 160mm. 12, 14 x 200mm. 16 x 300mm. 18 x 450mm. 250mm SDS Chisels : Flat, Groove, Point

3pc SDS Drill Set Sizes : 12, 16, 25 x 400mm

CT0877

CT3111

3pc SDS Extra Long Drill Set

3pc SDS Extra Long Drill Set

Sizes : 12, 16, 24 x 800mm

Sizes : 12, 16, 24 x 800mm


Core Drills & Diamond Drills CT2549

CT2550

Section 6

CT2548

6pc Diamond Drill Set

9pc Diamond Drill Set Sizes : 28, 35, 38, 44, 54mm 2 Pilot Drills, adaptor and hex key.

Sizes : 6, 8, 10, 20, 28, 35mm Suitable for drilling : Ceramic Tiles, Glass, Marble, Slate and Porcelain.

CT0688

CT0832

11pc Diamond Drill & Blade Set Blade Sizes : 115mm Sizes :22, 28, 35, 44, 67, 73mm with 2 Arbors Drill

Core Drills

11pc Core Drill Set Sizes : 38, 52, 65, 117, 127mm x 150mm Deep Extension : 88, 240mm Hex Adaptor : 115, 240mm SDS Plus Pilot Drill : 200mm Drift Key : 50mm

CT2523

6pc Core Drill Set Sizes - 28 x 300mm 52 x 150mm 107 x 150mm Extension - Hex & SDS Plus - 200mm Pilot Drill - 200mm

CT0682

3 Segment 38 mm

CT0683

4 Segment 52 mm

CT0684

4 Segment 65 mm

CT0685

5 Segment 107 mm

CT0686

5 Segment 117 mm

CT0687

5 Segment 127 mm

CT0856

6 Segment 152 mm

CT0857

6 Segment 200 mm

All Core Drills come with Pilot Drill and Adaptors

CT2524

Core Drill

Core Drill

50mm with SDS shank

110mm with SDS shank

CT3634

CT2525

Core Drill Extension 250mm with SDS shank

Pilot Drill & Adaptor Set for Core Drills Tapered Pilot Drill. Guide Removal Tool. SDS Arbor Adaptor. Hex Shank Arbor Adaptor

www.cannontools.co.uk


Section 6

Cordless Tools & Accessories

CT2052

CT1646

CT2046

18V

18V

10.8V

Cordless Mini Sander Pad Size - 3 inch / 75mm. No-Load Speed - 3000rpm. 10.8V Lithium Ion Battery. 1Hr Auto cut-off Charge. Weight - 0.88kg.

18V Cordless Angle Grinder

CT2265 18V Cordless Angle Grinder

Disc Size : 4.5â&#x20AC;? / 115mm No-Load Speed : 7000rpm 18V Lithium Ion Battery with 1Hr Charge Time Weight - 2.2kg

Disc Size : 115mm No-Load Speed : 6500rpm 18V Lithium Ion Battery and 230V Charger.

CT2051

CT2858

10.8V

18V 18V Battery for CT1646, CT3994, CT3995

CT2859

Cordless Oscillating Multi-Tool Kit This set includes many attachments to carry out precision work i.e Cutting, Sanding, Sawing and Scraping 10.8V Li-ion Battery with 10.8V Charger

18V Cordless Power Shears Cutting Depth - 1.6mm Steel Curve Cutting - 1.2mm No-Load Speed - 4500 rpm 18V Lithium Ion Battery Charging Time - 1Hr Auto cut-off Weight - 2.2kg

18V Battery Charger for CT1646, CT3994, CT3995

CT1647

CT2626 Multi-Tool Accessory Kit for CT2265 above

18V CT2625

CT2053

10.8V Battery Charger for CT2265

18V Battery

( Battery Not Included )

for CT2051 / CT2052

18V Cordless Planer - 82mm

CT2054

18V Battery Charger

Rated - 1500W Max Planning Depth - 1mm Max Speed - 13000 rpm Noise Level - 75 / 80.5 dBA Weight - 2.7Kg Charge Time 1 - 1.5Hr Battery Charger Output - 18V / 2400mA

for CT2051 / CT2052

With 2Batteries

NEILSEN

Distributed by Cannon Tools Limited

CT2627 10.8V Battery for CT2265 above


Multi-Tool & Cordles Tool Set CT0696

CT3658

230V

18V 10pc Ultimate Cordless Kit 3 Battery Packs - 18 Volt Lithium 2 X 3ah & 1x1.5ah Plus Charger With Starter Accessory Pack Portable Workshop in a Box

Oscillating Multi-Tool

Section 6

Kit Includes : Angle Grinder Bit Driver Circular Saw Drill Impact Gun Jigsaw Reciprocating Saw Sander SDS Hammer Drill Torch

Voltage : 230V / 300W / 50Hz No Load Speed : 1500 - 2100rpm Oscillation Angle : 3.2 degrees With Accessories

CT4047 3pc Multi-Tool Accessory Kit 10mm, 20mm, 35mm Saw Blades HCS For Wood | Plastic | Light Metal Suitable for CT0696 and most Oscillating Multi-Tools.

CT4048 4pc Multi-Tool Accessory Kit 2 x 35mm Saw Blades 52mm Scraper. 87mm Saw Blade - Semicircle HCS for Wood | Plastic | Light Metal. Suitable for CT0696 and most Oscillating Multi-Tools.

CT4049 5pc Multi-Tool Accessory Kit 50mm Scrapers - Straight & Bent. 33mm, 65mm, 78mm Grout Removal Blades. For Wood | Plastic | Glass | Stone | Tile Grout Suitable for CT0696 and most Oscillating Multi-Tools.

CT4050 14pc Multi-Tool Accessory Kit 35mm Saw Blade. 65mm Grout Removal Blade 80mm Saw Blade - Semicircle 80mm Sanding Pad Attachment 10 Mixed Sanding Pads. For Wood | Plastic | Glass | Stone | Tile Grout Suitable for CT0696 and most Oscillating Multi-Tools.

www.cannontools.co.uk


Section 6

Angle Grinders, Polishers & Accessories

CT1869

CT0827

CT1648

110V

230V

230V

Supplied in a Card box

115mmØ

115mmØ

115mmØ

Angle Grinder

Angle Grinder

Angle Grinder

Rated Frequency : 60Hz Rated Input power : 500W No-load speed : 11000min

Rated Frequency : 50Hz Rated Input power : 850W No-load speed : 12000min

CT1650

CT1649

110V

230V

230mmØ Angle Grinder Frequency : 60 Hz Rated Input power : 20000W No-load Speed : 6300 rpm

230mmØ Angle Grinder Frequency : 50 Hz Rated Input power : 20000W No-load Speed : 6300 rpm

Supplied in a Card box

Supplied in a Card box

CT0779

CT1034

230V

230V

Supplied in a Card box

Rated Frequency : 50Hz Rated Input power : 850W No-load speed : 12000min

Angle Grinder & Polisher Kit 230V / 50Hz Rated Power : 900W Speed : 4500 - 10000rpm 5" Cutting, Diamond Cutting and Grinding Discs 7" Sanding Disc and Polishing Bonnet

CT3091

1100W / 50Hz with speed control No Load Speed - 3000rpm Polishing Disc Diameter - 180mm / 7.2 inch

CT1028

Pin Spanner Suitable for Angle Grinders

NEILSEN

Polisher

Distributed by Cannon Tools Limited

CT1029

Spare Disc

Spare Bonnet

for Electric Polisher CT1034 180mm Replacement Velcro Head Pad

for Electric Polisher CT1034 180mm Relacement Wool Bonnet / Sleeve


Disc Cutters & Wall Chasers CT1415

CT1416

CT0849

110V

230V

230V

Cut Off Machine

Cut Off Machine

Blade : 14” / 355mm. Bore - 30mm No Load Speed - 3700rpm. 2000W 100mm Ø Max Cutting Capacity Pipe

Blade : 14” / 355mm. Bore - 30mm No Load Speed - 3700rpm. 2000W 100mm Ø Max Cutting Capacity Pipe

CT1184

CT0964

110V 125mm Wall Chaser

230V 125mm Wall Chaser

Disc : 125mm Rated : 1500W Max Cutting Depth : 5 - 30mm Max Channel Width : 8 - 30mm Max Speed : 8500 rpm Noise Level : 98.5 - 109.5dB(A) Weight : 4.7Kg

CT3097

Disc : 125mm Rated : 1500W Max Cutting Depth : 5 - 30mm Max Channel Width : 8 - 30mm Max Speed : 8500 rpm Noise Level : 98.5 - 109.5dB(A) Weight : 4.7Kg

CT2369

230V

Diamond Disc Continous Rim 2.2 x 180mm Ø Replacement Disc for popular Electric Tile Cutters like CT3097 opposite.

Section 6

230V Professional Wall Chaser Power - 1100W Speed - 2000 RPM Cutting Depth and Width - 25 - 35mm Suitable for different kinds of wall. Durable Cutting Wheel Up to 40 x blade sharpening. Long working life on different material - Concrete air brick - 6000M Solid brick - 3500M Cement-sand brick 3500M Cement-covered brick wall - 3000M Efficient Cutting 10 times quicker than normal wall chasing tools.

CT0223

CT0222

Tile Cutter 600W / 230V / 50Hz 180mm Ø Blade / 22.2 Bore / 2.2mm Thick Max Speed - 2990rpm Tilt Range - 0 - 45 degrees Table Size - 385 x 395mm Max Cutting Depth - 34mm / 21mm at an angle

Diamond Disc

Diamond Disc

4.5" / 115mm Ø Continous Rim Dry Cutting Thin Tiles

9" / 230mm Ø Continous Rim Dry Cutting Thin Tiles

www.cannontools.co.uk


Section 6

Diamond Discs

EN13236 General Purpose. For most construction materials - Stock Paving Bricks / some Granites / most Roofing Tiles and Hard Sandstones

Diamond Discs All Purpose CT1185

9” / 230mm

CT0830

12” / 300mm

CT1186

Diamond Discs All Purpose

14” / 355mm

Laser Welded

CT2928

Diamond Discs All Purpose

CT0128

9” / 230mm

CT0690

9” / 230mm

CT0221

12” / 300mm

CT0691

12” / 300mm

CT0930

14” / 355mm

CT0692

14” / 355mm

CT2926

CT2927

14” / 350mm Dry Cutting Depth - 120mm Speed - 4300 rpm / 80m/s Bore size - 25.4 mm

CT0954

12” / 300mm Dry Cutting Depth - 100mm Speed - 5100 rpm / 80m/s Bore size - 20 mm

12" / 300m Diamond Disc 'R' grade

CT2925

9” / 230mm Dry Cutting Depth - 80mm Bore size - 22.2mm Speed - 6600 rpm

CT0831

4.5” / 115mm Dry Cutting Depth - 30mm Speed - 13200 rpm / 80m/s Bore size - 22.2mm

CT0689 Diamond Disc 4½" / 115mm

Serrated Edge for Masonry, Brick and Concrete 5100 rpm Bore Size : 20mm Cutting Depth : 100mm Outstanding Cutting Performance High Quality Diamond Concentration Consistent Cutting Depth and Long Cutting Life

3pc Diamond Disc Set 4½" / 115mm Diameter. Bore Size : 22.2mm. Speed : 13000rpm. Cutting Depth : 30mm Continous Rim, Turbo-Cut Edge, Serrated Edge

CT0127

CT0833

Diamond Disc

Diamond Disc Mortar Raker

4½" / 115mm

For Dry Cutting Ideal for Cured Concrete Tiles, Stone, Hard Brick and Masonry

NEILSEN

Distributed by Cannon Tools Limited

CT3089

CT3090

12mm Tungsten Carbide Mortar Rake

4½” / 115mm

115mm Tungsten Carbide Grinding Disc

Thickness 6.4mm Cutting Depth 30mm For Removing Mortar Without Damaging Bricks

For concrete / stone and brick Suitable for all 155mm Angle Grinders Max Speed - 13300rpm. Ideal for removing rust


Cutting & Grinding Discs CT1188

Discs sold in box quantities are priced individually

CT0388

10pc Cutting & Grinding Disc Set

Discs sold in box quantities are priced individually

CT2377

4.5” / 115mm Ø with 22mm Bore 13300rpm. Max. 80 m/s. A30R BF

CT1122

2pc Metal Cutting Disc Set 4.5” / 115mm x 1mm - Stainless Steel

Thin 1mm x 115mm Ø 4.5” 22mm Bore. 13300rpm. Max. 80 m/s. A40 S BF

Discs sold in box quantities are priced individually

Discs sold in box quantities are priced individually

Discs sold in box quantities are priced individually

Discs sold in box quantities are priced individually

5pc Cutting Disc Set Metal Cut-Off Discs with 3/8” centre hole Max. Speed 25000rpm

13300rpm. Max. 80 m/s. A60TBF

CT1914

Discs sold in box quantities are priced individually

20pc Metal Cutting Disc Set

4.5” / 115mm / 3.2 Thick / 22mm Bore Max 13300rpm. 80 m/s For cutting only - not for side grinding

20pc Metal Cutting Disc Set

CT0926

CT3661

5pc Metal Cutting Disc Set

Size - 4.5” / 115mm with 22mm Bore 5 Metal Cutting Discs. 2 Metal Grinding Discs 2 Masonry Gutting Discs. 1 Masonry Grinding Disc Max Speed : 13300rpm. A24R BF

CT2931

Discs sold in box quantities are priced individually

Section 6

CT0974

Discs sold in box quantities are priced individually

5pc Metal Cutting Disc Set

5pc Metal Cutting Disc Set

5pc Metal Cutting Disc Set

9” / 230mm x 3.2mm. 22.2 Bore. Max 6400rpm/ 80 m/s

12” / 300mm x 3.5 x 20mm. 5100rpm. Max 80 m/s

14”/ 355mm. Bore 25.4mm. Speed 4400rpm. Max 80 m/s

CT0386

Discs sold in box quantities are priced individually

CT0389

Discs sold in box quantities are priced individually

20pc Metal Grinding Disc Set

10pc Stone or Masonry Cutting Disc Set

4.5” / 115mm x 6mm 22.2mm Bore. Max 13300rpm. 80 m/s

4½" / 115mm x 3.2mm 22.2mm Bore. Max 13300rpm. 80 m/s

CT0387

Discs sold in box quantities are priced individually

10pc Stone / Masonry Grinding Disc 4½" / 115mm x 6mm 22.2mm Bore. Max 13300rpm. 80 m/s

www.cannontools.co.uk


Section 6

Cutting, Grinding & Sharpening

CT3096

CT2914

CT2912

Drill Bit Sharpener 230V / 70W / 50Hz.

Bench Grinder 230V / 150W / 50Hz No load speed : 2950rpm Grinder wheel :150mm Ø

CT3996

Gives blunt drills a razor sharp cutting edge quickly. Suitable for carbon steel and HSS bits from 3 to 10mm. Drill guide for correct sharpening angle. No Load Speed : 3000rpm.

CT2915 Chain Saw Blade Sharpener 230V / 130W / 50Hz No-load Speed : 3000rpm 100mm Diameter Grinding Disc. Chain vice adjusts to any pitch and shape. Suitable for wall or bench mounting. Heavy duty steel base with safety guard.

Spare Grinding Wheel for Drill Bit Sharpener CT2914

Bench Grinding Discs A 36 and A 80 2 Grinding Wheels - 150mm Diameter Replacement Grinding Discs for CT3096

CT1670

CT2913

CT2818

Spare Grinding Disc 100 x 3.2mm for CT2912

Engraver 230V / 13W / 50Hz Variable Speed Control Includes Engraving Bit and 2 Stencils

Mini Drill Rotary Tool 230V / 130W / 50Hz / 1000-3200rpm Jaw Size - 3.2mm with Variable Speed Dial

CT3131

CT2605

CT2882

6pc Diamond Cutting Disc Set 16mm and 19mm Ø Diamond Discswith 3mm Shanks. Suitable for cutting Glass / Metal and Stone.

20pc Drill Set

Chain Saw Sharpening Kit

Micro HSS Sizes : 0.3 - 1.6mm

Sizes : 4.0, 4.5, 4.8, 5.5mm Diameter.

CT3133

CT3132

24pc HSS Carving & Milling Set

CT3702

3mm Shanks

6pc HSS Saw Disc Set Rotary Saw Blade Set Sizes : 22, 25, 32, 35, 44mm Ø with 6mm Bore. Supplied with Mandrel for Rotary Multi-Tools

NEILSEN

Distributed by Cannon Tools Limited

30pc Diamond Point Set Suitable for Cordless Tools


Grinding, Sanding & Shaping CT0702

CT3125

Section 6

CT3713

5pc Mounted Stone Set

24pc Surface Preparation Set 3 Arbors, Backing Pads 6mm Shanks. 1”, 2”, 3” Ø Abrasive Pads : 40, 60, 80, 100, 180 Grit.

3mm Shank. Aluminium Oxide. Max 12000 rpm Ideal for Cleaning, Grinding, Polishing and Carving.

CT2789

CT0997

5pc Mounted Stone Set 400pc Rotary Tool Accessory Kit

1/4” Shank Aluminium Oxide Material Ideal for Cleaning, Grinding, Polishing and Carving.

20pc Rotary Sanding Set

For Drilling, Polishing, Cleaning, De-Rusting, Engraving, Cutting, Carving, Hollowing, Sanding & Shaping. For Wood, Plastic, Fibreglass, Metal & Stone Use with most Mini Rotary Tools.

Sizes : 13, 19, 25, 32mm Ø Drums with 16 Assorted 80 and 120 Grit sleeves

CT2788

CT3129

10pc Mounted Stone Set

CT3126

1/8” and 1/4” Shank Aluminium Oxide Material Ideal for Cleaning, Grinding, Polishing and Carving.

CT3128

Polishing / Abrasive Wheels 3mm Shank with Power Tool attachment

206pc Polishing & Grinding Set

CT3134

Aluminium Oxide Mounted Wheels, Sanding Drums, Discs and Cut-off Discs.

50pc Mounted Grinding Stones

CT3124 12pc Sanding Band Set

10pc Cleaning & Polishing Kit 4 Aluminium Oxide Mounted Wheels 2 Flap Wheels - 30 x 25 / 50 / 20mm Buffing Pad / Polishing Compound Strapping Wheel Wire Brush 3” / 75mm 1/4 Hex Quick Chuck

25mm x Various Diameters

10 Assorted Shapes and Sizes. With 6mm Shanks.

CT2454

CT3127

6pc Polishing Kit 4 x 50mm Ø Abrasive Wheels with 6mm shank power attachment.

36pc Grinding Wheels 5 Assorted sizes. 1/4” Shank Coarse and Fine grits. 1 to 2.5 inch Diameter

www.cannontools.co.uk


Section 6

Rotary Burrs & Wire Brushes

CT3717

CT2555

4pc Carbide Rotary Burr Set - 1/4” / 6mm Shank

CT2372

Suitable for most Cordless and Power Drills 5 popular shapes Ball, Cylinder, Large and Small Cones.

4pc Carbide Rotary Burr Set

CT4216

CT4217

4pc Carbide Rotary Burr Set 1/4” / 6mm Shank

Extra Long Shafts

7pc Carbide Rotary Burr Set

7pc Carbide Rotary Burr Set 1/4” / 6mm Shank Suitable for most Cordless and Power Drills . With Ball, Cylinder Flat, Cylinder Radius, Tree Heads.

158-176mm Long with 1/4” / 6mm Shank for Cordless and Power Drills With Ball, Cylinder Flat, Cylinder Radius, Tree Heads.

CT3415

CT1369

www.cannon.co.uk CT3654

2pc Taper Reamer Set

HSS Taper Reamer De-Burring Tool

Deburring Tool with 2 spare blades. with interchangeable swivel cutting bits. Spare cutter stored in handle. Suitable for de-burring pipes and sheet materials.

For Reaming, De-Burring, Enlarging and Aligning holes in cast and sheet metal. Capacity : 1/8” to 1/2” and 5/32” to 7/8”

CT2803

CT2804

Wire Brush / Pipe Cleaner with Steel Bristles 1/2” Internal / External and 3/4” Internal / External. For steel, copper, aluminium and plastic pipes. CT0621

10 - 34mm, used for deburring all types of tube and pipe or any hole within the size range. Quick and effective deburring of electrical conduit tube.

CT1541

Wire Brush

Wire Brush

with Scraper and Steel Wire Bristles

with Scraper

CT3345

CT2470

Wire Brush

Wire Brush

Wire Brush

General purpose with Brass Wire Bristles

Steel Wire Bristles

General Purpose

NEILSEN

Distributed by Cannon Tools Limited


Section 6

Nylon & Wire Brushes CT3863

CT2572

CT1542

6pc 175mm Wire Brush Set With Brass, Nylon and Steel Bristles

20pc Brush Set Brass / Nylon / Steel Brushes

38pc Brush Set

1/4” Hex Shaft Quick Realease Driver and 150mm Extension Sizes - 6.35, 9.5, 12.7, 15.9, 19 and 25.4mm

CT3707

CT1397

with Quick Release Handle and Extension

CT1396

3pc 175mm Wire Brush Set With Brass, Nylon and Steel Bristles

Rotary Wire Brushes Cup Type with Twisted Knot

Rotary Wire Brush 4” / 100mm Flat Type Removes rust, paint, scale and dirt. Max Speed - 4500rpm

Rotary Wire Brush

CT1806

CT0622

CT2476 CT2477 CT2478 CT2479 CT2480 CT2481

4" / 100mm Twist Knot Flat Type

Box of 24

2½" / 65mm 3” / 75mm 3½" / 85mm 4” / 100mm 5” / 125mm 6” / 150mm

Rotary Wire Brushes

6pc Rotary Wire Brushe Set

12 Flat Brushes - 2" and 4" Diameter 12 Cup Brushes - 2" and 3" Diameter with Tempered Crimped Steel

1/4" Shank 1", 2", 3", 4" Ø Flat Type with 3" Cup Brush and 1" End Brush. Max : 4500 rpm.

CT1393

CT1394

CT1395

Rotary Wire Brush

Rotary Wire Brush

1" / 25mm Cup Type with Crimped Steel Bristles

2" / 50mm Cup Type with Crimped Steel Bristles

3" / 75mm Cup Type with Crimped Steel Bristles

Rotary Wire Brush

www.cannontools.co.uk


Section 6

Mitre Saws & Table Saw Kit

CT0607

CT1503

230V Mitre Saw - 190mm

230V Mitre Saw - 12” / 300mm Max Cutting Capacity at :55 - 90mm No-load Speed : 4800 r/min Rated input Power -: 1800W Rated voltage : 230V Frequency : 50Hz Measurement : 95 x 65 x 50cm

7.5” Mitre Saw Blade Rated Voltage : 230V / 50Hz Rated Input Power : 1400W No-Load Speed : 5000rpm Bore : 30mm Blade diameter : 190mm / 7.5in. Max Cutting : 35-50mm x 150-210mm

CT0092

CT4285

230V Mitre Saw 10” / 250mm

230V

with laser Guidance Rated Input : 1800W No load speed : 5000rpm Voltage : 230V / 50Hz Blade diameter : 254mm Max Cutting Capacity : H72 x W300mm at 0 x 90 Degrees. H40 x W300mm at 0 x 45 Degrees. 2M PVC Power Cord and UK Plug. CT0093 Dust Collection Bag. Clamp and Extension Bar. 110V Supplied Blade : Mitre Saw 254mm x 25.4mm x 3.0mm / 40 Tooth

10” / 250mm

Voltage : 110V / 60Hz

CT1501

Circular Saw 185mm Ø Blade 230V / 1200W / 50HZ No-Load Speed : 5000rpm Max cutting capacity : 65mm at 90 Degrees Max cutting capacity : 44mm at 45 Degrees With Saw blade : 185mm x 20mm x 24T Parallel Guide and Blade Spanner.

CT0902 Roller Stand 27”- 46” Adjustable Height

230V Table Saw 10” / 250mm Blade / 10in / 250mm Max Cutting Capacity 60 - 75mm No-load Speed - 4600 r/min Rated input Power - 1200W / 1500W Rated voltage - 230V Frequency - 50-60Hz N.W./G.W. - 31kg / 35kg Measurement – 68 × 57 × 34cm

NEILSEN

Distributed by Cannon Tools Limited


Circular Saw & Jig Saw Blades CT4284

CT2518

CT3635

230V

3pc TCT Saw Blades

TCT Saw Blade

160mm Ø Teeth : 16, 24, 30 Speed : 8460rpm Bore : 30mm

160mm Ø Teeth : 16 Speed : 8460rpm Bore : 30mm

x3 CT3636

CT2519 Jigsaw with Laser Guidance 230 / 800W / 50Hz Speed : 800 - 3000 rpm Cutting Capacity : Wood :100mm / Steel : 10mm Features : Tool free blade change 4 stage Pendulum stroke adjustment Copper motor With laser, LED, Soft Grip Handle & Steel base plate Accessories : Blade for wood and Parallel Guide.

CT3122

TCT Saw Blade

3pc TCT Saw Blades 185mm Ø Teeth : 20, 24, 40 Speed : 7300rpm Bore : 30mm

160mm Ø Teeth : 24 Speed : 8460rpm Bore : 30mm

x3

CT3536

CT3637

3pc TCT Saw Blades

TCT Saw Blade

210mm Ø Teeth : 24, 40, 48. 30mm Speed : 7000 rpm Bore : 30mm

Section 6

160mm Ø Teeth : 30 Speed : 8460rpm Bore : 30mm

x3

CT2520 5pc Jigsaw Blade Set Fast Cut for Wood. Suitable for the following : AEG, Bosch, DeWalt, Hitachi, Festool, Elu, Makita, Metabo, Atlas-Copco

CT3120

3pc TCT Saw Blades 235mm Ø Teeth : 24, 40, 48 Speed : 5820rpm Bore : 30mm

x3

CT2521

www.cannon.co.uk CT1699

2pc TCT Saw Blades 5pc Jigsaw Blade Set Wood & PVC. Suitable for the following : AEG, Bosch, DeWalt, Hitachi, Festool, Elu, Makita, Metabo, Atlas-Copco

CT3121

5pc Jigsaw Blade Set Metal, Wood & PVC. Suitable for the following : AEG, Bosch, DeWalt, Hitachi, Festool, Elu, Makita, Metabo, Atlas-Copco

254mm Ø Teeth : 40, 60 Speed : 8400rpm Bore : 30mm

Folding Saw Horse

x2

CT2522

2pc TCT Saw Blades 300mm Ø Teeth : 40, 60 Speed : 4500rpm Bore : 30mm

x2

Reinforced Plastic Construction Folds Flat For Easy Storage

www.cannontools.co.uk


Section 6

Reciprocating Saw & Accessories

CT0782

CT3500

230V Reciprocating Saw with 3 blade starter pack Power & Voltage : 230V / 1050W / 50Hz. Stroke : 26mm at 800-2700/pm. Cutting capacity : Steel - 15mm Plastic - 32mm / Wood - 115mm. Tool-less blade change system. Adjustable pivot shoe. 360° Rotating Handle. Dual LED light.

CT0659

3pc Reciprocating Saw Blade Set Carbon Steel for Wood Manganese Steel for Plastic HSS for Steel

CT0671

CT0619

Reciprocating Saw Universal Adapter Expands the use of a Reciprocating Saw File / Scrape / Brush / Scrub / Scour and De-burr Fits all reciprocating saw brands. Will fit Neilsen Reciprocating Saw - CT0782

CT0613

Reciprocating Saw Replacement Tang Kit For Universal Adapter - CT0659 For simple and easy Tang replacement Kit includes : Tang Collar and Mounting Screw

With Universal Adapter for attachments : Sanding Pad 50mm Detail Scraper 100mm Scraper Will fit Neilsen Reciprocating Saw - CT0782

For general purpose scraping Used with Universal Adapter - CT0659

CT0677

CT0614

110mm Offset Stainless Steel Brush

4pc Reciprocating Saw Accessory Set

2” / 50mm Detail Scraper

with 20mm long bristles. Used with Universal Adapter - CT0659

4” / 100mm Detail Scraper For general purpose scraping Used with Universal Adapter - CT0659

CT0660 CT0616

CT0612 Offset Cleaning / Scouring Pad

110mm Straight Stainless Steel Brush

Poly Propylene with Scotch Brite Used with Universal Adapter - CT0659.

with 20mm long bristles. Used with Universal Adapter - CT0659

CT0669

CT0618

6pc Reciprocating Saw Accessory Set With Universal Adapter for attachments : Metal Half Round File, Scrub Brush , 100mm Scraper, Stainless Offset Brush, Cleaning / Scour Pad Will fit Neilsen Reciprocating Saw - CT0782

NEILSEN

Distributed by Cannon Tools Limited

Offset Nylon Scrub Brush Used with Universal Adapter - CT0659.

Detail Sanding Pad Attachment For mouse style hook and loop sanding pads. Used with Universal Adapter - CT0659.


Hand & Power Sanding CT3641

CT3191

CT3390

230V

230V

Section 6

Sanding Block 150 x 90mm Soft Rubber with Hook and Loop Back Palm Sander 230V / 50Hz / 240W / 1300 rpm With 1 sanding pad, 1/4 sheet 100 x 110mm

CT3642 CT3192

230V

Sander 230V / 50Hz / 1220W No Load Speed : 1500 - 2300rpm Grinding Pad Diameter : 215mm Sandpaper Diameter : 225mm Extracts dust into the bag supplied.

Sanding Block 135 x 68mm Soft Rubber with Hook and Loop Back CT3643

CT3809 Delta Sander 230V / 50Hz / 200W / 1300rpm With 1 sanding pads 140 x 140 x 80mm

230V

CT1035

4pc Sanding Block Set 60 / 80 / 120 Grit Sanding block Handle with 3 Sanding Sponges.

Orbital Sander

Sander Pads -

with Dust collection box 125mm Ă&#x2DC; Sheet Orbital Sander Voltage : 230V / 450W powerful motor Frequency : 50Hz No load speed : 6000 - 12000rpm

15pc Delta Quick Fit 60, 80, 120, 180, 240 grit

CT3306 CT0955 230V

CT3997 230V

Rubber Sanding Block - 120 x 65mm CT3079 Belt Sander

Sanding Belts for all 75 x 457mm Sanders Aluminium Oxide Sanding Belts Fully Resin Bonded

Rated Voltage : 230V Rated Frequency : 50Hz Rated Power : 850W Speed : 120-280m/min Sanding Belt : 75 x 457mm With Clamps for bench use and spare sanding belt to start.

Power Sander Pad size : 90 x 187mm Frequency : 50Hz Rated Power : 220W No load speed : 6000-12000r/min Adjustable Speed Control Supplied with 1 sand paper starter

www.cannontools.co.uk


Section 6

Sanding

CT1035

CT3082

CT3080

Sander Pads 15pc Delta Quick Fit 60, 80, 120, 180, 240 grit

CT3084

CT3083

10pc 115mm Ø Sanding Discs Aluminium Oxide.

10pc 125mm Ø Sanding Discs

22.2mm Cross slot fitting for use with rubber backing discs. Fully Resin Bonded.

Aluminium Oxide. For use with sander polishers. Hook and Loop Backing for quick fitting

CT3391

10pc 125mm Ø Sanding Discs Aluminium Oxide.

150, 180, 240, 400 Grit

CT3662

CT3078

Sanding Sheets

Flexible for all 10 x 330mm Sanders Aluminium Oxide Sanding Belts Fully Resin Bonded

NEILSEN

Sanding Belts

Distributed by Cannon Tools Limited

10pc 125mm Ø Sanding Discs Aluminium Oxide. For use with orbital sanders. Hook and Loop Backing for quick fitting. Holes pre-punched for dust extraction.

CT3663

8pc 225mm Ø Sanding Discs

22.2mm Cross slot fitting for use with rubber backing discs. Fully Resin Bonded.

10pc 135 x 68mm Hook and Loop fits CT3642

Pre-punched for use with orbital sanders. Hook and Loop Backing for quick fitting.

Suitable for all 140mm Detail Sanders. Hook and Loop backing for quick fitting.

CT3081

CT3085

10pc 115mm Ø Sanding Discs Aluminium Oxide.

10pc 140mm Ø Sanding Sheets Aluminium Oxide.

Sanding Sheets 10pc 150 x 90mm Hook and Loop fits CT3641

CT3079

Sanding Belts Flexible for all 75 x 457mm Sanders Aluminium Oxide Sanding Belts Fully Resin Bonded


Sanding & Polishing CT3087

CT3086

CT3130

10 Sanding Sheets

10 Sanding Sheets

93 x 190mm Heavy 'E' weight Aluminium Oxide Pre-cut to fit all 1/3 sheet sanders

93 x 230mm Aluminium Oxide. Heavy 'E' weight and pre-cut to fit all 1/3 sheet clip sanders. Hook and Loop Backing

CT3703

Section 6

16pc Flap Wheels

CT3704

Display Box with 6mm Shanks. 60 x 40mm Ø Aluminium Oxide suitable for removing scratches, rust, corrosion and deburring.

CT0638 12pc Sanding Sheets 230 x 280mm Assorted Course, Medium, Fine and Extra Fine. Suitable for metal, wood, painted surfaces and plastic.

CT2833

12pc Sanding Sheets 30 x 280mm Assorted Grit Wet and Dry Emery Paper. Course, Medium, Fine, Extra Fine. Suitable for metal, wood, painted surfaces and plastic.

3pc Sanding Disc Set

CT2902

60 Grit Aluminium Oxide. Speed - 12300rpm Removes Rust and Paint from Metal, Wood and Plastic.

CT3088

7pc Cleaning & Polishing Kit

6pc 115mm Ø Flap Disc Set

Polishing Compound, 100mm Buffing Pads and Arbor. To remove scratches and polish hard metals.

Cleaning and Polishing Pad - 6” / 150mm Ø For use on Bench Grinders and Power Drills. 1/2” Face Edge with 5/8” Hole

2 x 40 Grit 2 x 60 Grit 2 x 80 Grit

CT3489

CT3490

CT3491

115mm Ø Flap Disc

115mm Ø Flap Disc

115mm Ø Flap Disc

Bore 22mm 40 Grit Aluminium Oxide Speed 12300rpm Max 80m/s Suitable for Metal, Wood and Plastic Removes Rust and Paint

Bore 22mm 60 Grit Aluminium Oxide Speed 12300rpm Max 80m/s Suitable for Metal, Wood and Plastic Removes Rust and Paint

Bore 22mm 80 Grit Aluminium Oxide Speed 12300rpm Max 80m/s Suitable for Metal, Wood and Plastic Removes Rust and Paint

www.cannontools.co.uk


Section 7

Ball Pein & Claw Hammers

CT0597

CT2766

CT0474

8oz Ball Pein Hammer

4oz Cross Pein Hammer

8oz Claw Hammer

with Stubby Rubber Handle

with Hickory Handle

Steel Shaft with rubber grip

CT2765 CT1814

CT0531 8oz Claw Hammer

4oz Ball Pein Hammer

with Stubby Rubber Handle

16oz Claw Hammer

with Hickory Handle

CT0532

all forged with soft grip handle

CT1815 CT0599 16oz Ball Pein Hammer 16oz Ball Pein Hammer with Hickory Handle

all forged with soft grip handle

24oz Claw Hammer

CT1286

with TPR Handle

CT1816 CT0475 16oz Ball Pein Hammer 24oz Ball Pein Hammer

Handle bonded to body Unbreakable Fibreglass Core High Grade Steel Head

with Hickory Handle

CT1817

16oz Claw Hammer Steel Shaft with rubber grip

CT1287 CT0598 24oz Ball Pein Hammer

32oz Ball Pein Hammer

Handle bonded to body Unbreakable Fibreglass Core High Grade Steel Head

with Hickory Handle

16oz Claw Hammer with Aluminium Handle

CT1818

CT1288 CT0438

40oz Ball Pein Hammer with Hickory Handle

NEILSEN

Distributed by Cannon Tools Limited

32oz Ball Pein Hammer Handle bonded to body Unbreakable Fibreglass Core High Grade Steel Head

16oz Claw Hammer with High grade Wooden Handle


Claw Hammers, Mallets & Special Application Hammers CT1819

CT3553

CT2905

16oz Rubber Mallet

16oz Claw Hammer

Section 7

25mm Ă&#x2DC; Double Face Hammer

with Black and White non marring face

Fibreglass and Rubber Handle

with Hickory Handle

CT3554 CT1289

CT2906 32oz Rubber Mallet with Black and White non marring face

16oz Claw Hammer Steel Head with Fibreglass Core Handle.

45mm Ă&#x2DC; Double Face Hammer

CT0285

Fibreglass and Rubber Handle

CT0145

CT3048 24oz Rubber Mallet with fibreglass handle

16oz Claw Hammer with Fibreglass Shaft

4 in 1 Multi-Head Hammer

CT0286

4 in 1 Quick change head hammer with varying degrees of hardness. Fibreglass handle with rubber grip

CT1306

32oz Rubber Mallet

16oz Claw Hammer or Nailing Hammer with Fibreglass Shaft and Rubber Grip

CT3645

with fibreglass handle

CT2384

Flooring Intsallation Kit

CT1307

for Laminate and WoodFlooring Hammer, Pull Bar, Tapping Block, 20 Spacers

24oz Shot Filled Deadblow Hammer

16oz Claw Hammer or Nailing Hammer with Fibreglass Shaft and Rubber Grip

CT2219

1lb Copper Hammer

CT4091

with Fibreglass Shaft

CT1308

CT2220 24oz Claw Hammer or Nailing Hammer with Fibreglass Shaft and Rubber Grip

4.5kg Dead Blow or Bumping Hammer

2lb Copper Hammer

with 105mm Head and 780mm Handle

with Fibreglass Shaft

www.cannontools.co.uk


Section 7

Mallets & Masonry Hammers CT0242

CT2795

CT0508

300g Chipping Hammer

1.0 kg Club Hammer

High Grade Steel Head Handle bonded to Fibreglass Core

4.5â&#x20AC;? Mallet Wood Hammer

with white wooden handle

CT0511 CT0533

CT0243

2.0 kg Club Hammer with white wooden handle

500g Chipping Hammer

14oz Wall Boarding Hammer

High Grade Steel Head Handle bonded to Fibreglass Core

with soft grip handle

CT0596

CT0244

CT0426

2.0 kg Club Hammer with Hickory Handle

800g Machinist Hammer

600g Masonry Hammer

High Grade Steel Head Handle bonded to Fibreglass Core

with Fibreglass Handle

CT0282

CT0245

CT0534

2.0 kg Club Hammer High Grade Steel Head Handle bonded to Fibreglass Core

1500g Machinist Hammer

600g Masonry Hammer Metal shaft with soft grip handle

CT3864

CT1292

High Grade Steel Head Handle bonded to Fibreglass Core

2lb Sledgehammer

CT0281

High Grade Steel Head Handle bonded to Fibreglass Core

1.0 kg Club Hammer

22oz Scutching Hammer

CT1293

High Grade Steel Head Handle bonded to Fibreglass Core

with changeable Scutching Combs. Stonemasons Scutch Hammer for cutting rock, trimming stones, shaping and chasing out channels.

CT1291 CT3865

3pc Scutching Comb Set 1â&#x20AC;? / 25mm for Sctuching Chisels or Scutching Hammer CT3864

NEILSEN

Distributed by Cannon Tools Limited

1.8 kg Club Hammer

4lb Sledgehammer

High Grade Steel Head Handle bonded to Fibreglass Core

High Quality Unbreakable Fibreglass Core with High Grade Steel Head and Elastomer Coated Handle.


Roofing Tools & Sledgehammers CT0351

CT1294

4lb Sledgehammer 14” Long - 50% Fibreglass Handle

CT0897

Section 7

CT1295

6lb Sledgehammer

10lb Sledgehammer

High Quality Unbreakable Fibreglass Core with High Grade Steel Head and Elastomer Coated Handle.

High Quality Unbreakable Fibreglass Core with High Grade Steel Head and Elastomer Coated Handle.

CT1296

CT0284

14lb Sledgehammer High Quality Unbreakable Fibreglass Core with High Grade Steel Head and Elastomer Coated Handle.

12lb Sledgehammer with 30” Fibreglass Handle

CT0844

28”

CT1409

34”

CT0593

14lb Sledgehammer with 36” Fibreglass Handle

CT4092

Sledgehammer Handles

6.5kg Fence Maul

10lb Sledgehammer

36” Fibreglass Shaft for Fence Posts with Precision Cast Head

with 36in. Hickory Handle

CT1176

CT1177

CT1325

Slate Ripper For removing slates from existing slate roofs. Also removing ceramic tiles Cedar Shakes and Asbestos Shingles. Length : 700mm with handle

Slater's Axe / Roofing Axe Right Hand Slater's Axe for Roofers

10” / 250mm Replacement Hammer Handle

www.cannontools.co.uk


Section 7

Cold Chisels

CT0212

CT0213

CT0214

Bolster Chisel

Bolster Chisel

Bolster Chisel

Induction Hardened 2¼” / 60mm

Induction Hardened 3” / 75mm

Induction Hardened 4” / 100mm

CT0034

CT0035

CT1481

CT1482

Bolster Chisel

Bolster Chisel

Bolster Chisel

Bolster Chisel

60mm x 250mm

85mm x 250mm

60mm x 250mm

100mm x 250mm

CT1486

Please Check out Section 6 for SDS Chisels Page 169

Cold Chisel 250mm Point

CT0467

CT0506

CT1485 Bolster Chisel 20mm x 460mm

CT0507

Cold Chisel

Cold Chisel

Cold Chisel

16mm x 250mm

16mm x 300mm

16mm x 460mm

CT0468

CT0469

CT0470

Cold Chisel

Cold Chisel

Cold Chisel

25mm x 250mm

25mm x 300mm

25mm x 460mm

CT2131

CT2130

7 CT2148

CT2149

Cold Chisel

Cold Chisel

Masonry Chisel

Plugging Chisel

300mm Point Heavy Duty

25 x 300mm Heavy Duty

76mm Wide Heavy Duty

16mm Blade Heavy Duty

NEILSEN

Distributed by Cannon Tools Limited


Nail Pullers, Pry Bars & Wrecking Bars CT4203

Gorilla Bars

Section 7

Wrecking Bars

Wrecking Bars CT1476

12” / 300mm

CT0025

18” / 460mm

Nail Starter

CT1477

18” / 460mm

CT0026

24” / 600mm

140mm Long with Magnetic Head

CT1478

24” / 600mm

CT0027

30” / 760mm

CT1479

36” / 900mm

CT0028

36” / 900mm

CT1480

48” / 1200mm

CT0639 Tack Lifter

CT0065 Nail Puller 12” / 300mm

CT0209

Pry Bar - Heavy Duty 5' / 60"

3pc Nail Punch Set Sizes : 1/2”, 3/32”, 1/8”

CT0029

Crow Bar - Heavy Duty 5' / 60" CT2218

See Pages 146 / 147 for more Pry Bars

CT3728

3pc Nail Punch Set Sizes : 1/32”, 1/16”, 3/32” Sets Nails and Brads for a smooth finish

CT0392 Pry Bar

CT3727

15" / 380mm

3pc Centre Punch Set Sizes : 1/32”, 1/16”, 3/32” Sets Nails and Brads for a smooth finish

www.cannontools.co.uk


Section 7

Brick Cutters & Carriers

Manual Pavers, Block-Brick Cutters / Splitters Will Cut Most Paving Materials Available Brick - Concrete - Clay - Stone - Granite

CT3753

CT2057 500mm Heavy Duty TCT Masonry Saw

Brick Cutter - 3300TS Cutting Length up to 330mm Cutting Thickness 10-120mm

25 Teeth and 17 Tungsten Carbide Tips. Use to cut Brick, Aerated Blocks and Slate

CT2062

Brick Tongs - D-Type

CT2058

Will carry 5 - 8 Bricks with ease Adjustable 12”- 20” 300mm to 500mm

Brick Cutter - 4300TS Cutting Length up to 430mm Cutting Thickness 10-200mm

CT1010

Brick Tongs - D-Type Will carry 6 - 10 Bricks with ease Adjustable 16”- 29” 400mm to 725mm

CT2059

CT2061

Brick Cutter - 5300TS

Brick Holder - Y-Type

Cutting Length up to 530mm Cutting Thickness 20-120mm

Expert Quality, Fully Adjustable. When the Clamp is Lifted the jaws automatically close clamping the bricks solidly in place. Max Length 1300mm

NEILSEN

Distributed by Cannon Tools Limited


Cement Mixers & Concrete Equipment CT0310

CT0836

Cement Mixer 230V / 50Hz

Cement Mixer 230V / 50Hz / 550W

Drum Capacity : 140 litres Drum Opening : 15” / 375mm Motor Input : 0.75hp Motor Output : 0.5hp Speed : 1520rpm Max Temp : 40 Degrees

Section 7

Cement / Concrete Mixers Drum Capacity : 180 litres No Load Speed : 30rpm

CT0313 Cement Mixer 110V / 60Hz Same Spec. as above.

CT1700

CT1196

6mm

Threaded Bars

CT1197

8mm

5pc Sets + 25 nuts

CT1198

10mm

CT1199

12mm

Concrete Vibrator 5.5hp Petrol Engine Poker available - CT1701

CT2801

CT1701 Concrete Vibrator Poker 6M / 22’ Hose for CT1700

CT3832 Flexible Pump with Dynapac Adaptor 6M x 32mm Hose Max Lift : 16M Weight 21.5kg Can be used with CT1700

Petrol Disc Cutter 12” / 300mm Disc Cutter with 5.5hp Petrol engine. Cutting Depth 80mm. 1” / 25.4mm Blade mount. Dimensions : 930 x 570 x 940mm.

www.cannontools.co.uk


Section 7

Floats & Trowels

CT0406

CT1811

CT3741

Mortar Joint Raker

Brick Jointer

Brick Jointer 4 interchangeable Steel Barrels Sizes : 1/2”, 5/8”, 3/4” and 7/8 “ Cast aluminium handle. Supplied with storage pouch for spare barrels.

CT1663

CT0082

CT1664

Pointing Trowel

Pointing Trowel

Pointing Trowel

with rubber handle 4" / 100mm

with wood handle 4" / 100mm

with rubber handle 5" / 125mm

CT0133

CT1666

CT0132 Pointing Trowel

Bricklaying Trowel

Bricklaying Trowel

10" / 250mm

11" / 280mm

CT3499

CT1725

Bucket Trowel 6” / 150mm Heat Treated Steel Blade. Cushion Grip Handle.

Bucket Trowel 7” / 175mm

CT1665

CT0131

Gauging Trowel 7” / 175mm Heat Treated Steel Blade. Cushion Grip Handle.

Gauging Trowel 7” / 175mm Heat Treated Steel Blade. Wood Handle.

CT3054

CT3053

with wood handle 6" / 150mm

CT3297 Bronze Edging Trowel

Heat Treated Steel Blade. Cushion Grip Handle.

CT3298

Bronze Groover Trowel CT0552 2pc Corner Trowel Set Blade Length 125mm

NEILSEN

Distributed by Cannon Tools Limited

Grout Float

Grout Float

150 x 50mm

305 x 100mm White


Floats, Trowels & Hawks CT0272

CT1668

CT1938

Serrated Plastering Trowel

Serrated Plastering Trowel

Serrated Plastering Trowel

125 x 280mm

125 x 280mm

125 x 280mm

CT1667

CT2137

CT1936

Section 7

Plastering Trowel

Plastering Trowel

Plastering Trowel

125 x 280mm

75 x 190mm

250mm Long

CT3287

CT1935

Plastering Floats

Plastering Trowel

Flooring Trowel

114 x 450mm

16â&#x20AC;? / 400mm

CT1669

CT1443

140 x 280mm

CT1446

135 x 320mm

CT1444

180 x 320mm

CT1447

180 x 350mm

CT1445

200 x 360mm

CT1937 Finger Trowel 10mm

Aluminium Plastering Hawk 330mm Square

CT1448

CT0553 Margin Trowels 3pc set

Plastering Hawk 330mm Square

CT0485

CT1449 Plastering Darby 120 x 1200mm

Plastering Hawk 335 x 335mm Plastic. Detachable Handle with Non-slip Surface.

CT1450

Plastering Float with Sponge 230 Long x 14mm Deep

www.cannontools.co.uk


Section 7

Plastering Tools & Equipment

Taping Knives CT0790

150mm

CT2455

200mm

CT0792

250mm

CT0794

300mm

CT0796

350mm

CT0933

18” - 30”

CT0934

24” - 40”

Adjustable Stilts

CT2791

Fish Tape 50ft x 1/8” Used to guide electrical wire through conduits and walls. With 4 viewing ports showing remaining tape.

for finishing plasterboard joints

CT2465 10pc 330mm Cable Access Kit

CT2349

CT2464

Plaster Board & Door Lifter

10pc 1000mm Cable Access Kit CT2456 Plaster Mixer 600 x 125mm Ø

CT2601 Drywall Lift

CT2431 10L Rubber bucket CT1090 Air Powered Plaster Gun for Ceilings

CT2433

40L Rubber Mixing Trough

NEILSEN

Distributed by Cannon Tools Limited


Drainage / Water Pumps CT1731

CT1732

Water Pump 1000GPH

Water Pump 2000GPH

Section 7

CT1733 Water Pump 3000GPH

Bilge Pumps with Positive seal cord. Designed to pump water with floating waste. Removable base for easy access for cleaning

CT2350

CT1033 Submersible Water Pump Clean Water

CT0260

Submersible Water Pump Dirty Water

230V / 400W / 50Hz 10m Cable Max. Delivery Height 8m Max. Submersion Depth 5m Max. Delivery Capacity 120 Lpm Max, Grain Size 25mm Accepts Pipe Diameters: 1in. 1.1/4in. and 1.1/2in.

Bailing Bowl Galvanised Steel

CT0848

Petrol Water Pump 2" / 50mm Bore

CT2437

Engine Power : 2.8ps Engine Speed : 3600rpm Total Head : 24m / 85ft Sopup Head : 6m / 28ft Flow : 600 L/pm or 158 G/pm

Petrol Water Pump 3" / 75mm Bore

CT2892

CT2893

Diesel Water Pump - 2”

Diesel Water Pump - 3”

Electric Start Output Power - 5hp Port Diameter - 2” / 50mm Discharge capacity - 25 m3/h Total head lift - 26 metres Max suction head - 8 metres Rotation speed - 3600rpm Priming time - 70 s/5m Fuel Consumption - < 285 g/kw.h Dry weight - 35 kg Engine model - LD170F/E Rated Power - 2.8 kw Displacement - 211 cm3 Overall dimension - 540L x 440W x 530H (mm)

Electric Start Output Power - 7hp Port diameter - 3” / 75mm Discharge capacity - 35 m3/h Total head lift - 26 metres Max suction head - 8 metres Rotation speed - 3600rpm Priming time - 100 s/5m Fuel Consumption - < 283 g/kw.h Dry weight - 45 kg Engine model - LD178F/E Rated Power - 4 kw Displacement - 296 cm3 Overall dimension - 595L x 480W x 580H (mm)

www.cannontools.co.uk


Section 7

Power Washers & Accessories

CT1855

CT3420

Petrol Pressure Washer

Petrol Pressure Washer

4.6hp OHV 4-Stroke Engine Max. Inlet Temperature : 45°C Max. Inlet Pressure : 90psi 15.4mpa / 2200psi / 154Bar Flow : 7.0 Lpm / 1.8Gpm Speed : 3450rpm

Rated output : 4.5hp Max output : 5.5hp Rated pressure : 140bar Max pressure : 180bar - 190bar Flow : 7.0 - 7.5 Litres Per Minute Revolution : 3600 rpm Displacement : 163 cc Consumption : ≤ 395G / kW.h

CT3806

CT2257

CT2817

Spare Pump

Pump Cover

for Pressure Washer CT1855

for Pressure Washer CT1855

CT3336

CT2865

CT3337

CT2857

Rotary Turbo Nozzle

Hose Connector

Pump Relief Valve

to fit Pressure Washer CT1855

for Pressure Washer CT1855

for CT1855

Spare Pump for Pressure Washer CT3420 Petrol 4.5hp

Pressure Washer Hose for CT1855

CT2256

CT2884

CT2547

Accessory Kit

Accessory Kit

Accessory Kit

for Pressure Washer CT1855

for Pressure Washer CT2800

for Pressure Washer CT1730 / CT1757

CT2856

CT2885

CT2255

Spare Pump

Spare Pump

for Pressure Washer CT2800 Petrol 2.4hp

for Pressure Washer CT1757 Petrol 4hp

Rotary Turbo Nozzle to fit Pressure Washers CT1757 / CT2800

NEILSEN

Distributed by Cannon Tools Limited


Power Washers & Accerories CT1709

Petrol Pressure Washer 13hp OHV 4 Stroke Engine Displacement : 389cc Rated Pressure : 25MPa / 3600psi Max Pressure : 30MPa / 4350psi Rated Flow : 13Lpm Max Temperature : 60 degrees C No-Load Speed : 3600rpm 4 Different Nozzles 8M High Pressure Hose Noise : 103dB

CT2883

Section 7

CT4127 12 litre Galvanised Steel Bucket with wooden handle

CT2432 Rubber bucket 14 litres

CT2866

Rotary Turbo Nozzle

Accessory Kit for Pressure Washer CT1709

to fit Pressure Washer CT1709

CT1971

CT3144

CT0760

Diesel Pressure Washer Pump Type : Axial Pump Rated Pressure : 20mpa / 2900psi Flow : 10Lpm / 2.65gpm Max Pressure : 25mpa / 3600psi Displacement : 305cc Max Output : 6.0hp Engine Speed : 3600rpm Fuel Volume : 3.5L Oil Volume : 1.1L Low Oil Shut Down

Hose For Diesel Washer CT1971

CT0759

Rubber Bucket / Water Trough - 60 litres CT3344 Patio Wire Brush with Raking Spike

Pump for Pressure Washer C1971

CT0758 Spare Lance for Diesel Washer CT1971

CT3280

CT3001

Block Paving Wire Brush Replacement Head for CT2966

CT2966 Tyre for CT1971

Patio Wire Brush

www.cannontools.co.uk


Section 7

Compactors & Spares

CT1703

CT2146

Petrol Plate Compactor

Petrol Plate Compactor

2.4hp Petrol Engine Plate Size : 480 x 320mm Speed : 20-25 Metres Per Minute Impact Force : 1030kg Impaction Depth : 150mm Climb Capacity : 0-20° Noise : 94 dB(A) G.W : 40kg N.W : 36kg

5.5hp Petrol Engine Size : 510 x 350mm with Rubber Mat Speed : 20-25 Metres Per Minute Impact Force : 1030kg Rotary Speed : 5600rpm Impaction Depth : 150mm Climb Capacity : 0 - 20 degrees Noise Level : 98 dB(A) G.W : 65kg N.W : 60kg

CT1707 Petrol Plate Compactor 5.5hp Petrol Engine Plate Size : 510 x 350mm Speed : 20-25 Metres Per Minute Impact Force : 1030kg Impaction Depth : 150mm Climb Capacity : 0-20° Noise Level : 98db(A) G.W : 65kg N.W : 60kg

CT1791B CT1789

Spare 5.5hp Petrol Engine

Spare Vibration Head Parts for NEW MODEL Compactors CT1707 / CT2146

CT0577

CT0567

Petrol Plate Compactor

Diesel Plate Compactor

5.5Hp Honda GX160 Engine Plate Size : 500 x 360mm Power : 3.2Kw / 4.2Hp Operation Mass : 61Kg / 134lb Frequency : 5600vpm Centrifugal Force : 10.5KN Compaction Depth : 20cm / 8” Travel Speed : 40cm/s Efficiency : 450m²/hr Size : 1080 x 400 x 800mm

6hp Diesel Engine Air Cooled, 4 Stroke Engine Plate Size : 730 x 370mm Speed : 25 cm/s Centrifugal Force : 30.5kn Impaction Depth : 500mm Weight : 168kg

NEILSEN

Distributed by Cannon Tools Limited


Compactors & Dumper Truck CT2886

CT2868

Petrol Plate Compactor

Petrol Plate Compactor

5.5hp Petrol with Water Tank Plate Size : 62 x 45cm Rotary Speed : 5800 rpm Impact Force : 1300 kg Compaction Depth : 20 cm Travel Speed : 20-25 m/min Climb Ability : 0-20 degrees G.W. : 75 kg N.W. : 70 kg Noise Level : 98db/A

6.5hp Petrol with Water Tank Plate Size : 53 x 50cm Operation Mass : 84kg Frequency : 5500vpn Centrifugal Force : 13.0kn Compaction Depth : 30cm Travel Speed : 40cm/s Efficiency : 660m/hr

Section 7

CT1791 Vibration Head for Older Model Compactors  CT1707 / CT2146

C2816 Dumper Truck with Shovel 6.5hp / 4.8kw Petrol Engine Max. Load - 500kg Cubic Bucket Capacity - 0.14M Cubic Shovel Capacity - 0.004M Max Lift Height - 825mm Max Speed - 17km/h

www.cannontools.co.uk


Section 7

Tape Measures

CT2792

CT2793

CT2794

3M / 10ft Tape Measure

5M / 16ft Tape Measure

7.55M / 25ft Tape Measure

16mm Blade with Dual Scale ABS case with Belt Clip and Tape Lock

16mm Blade with Dual Scale ABS case with Belt Clip and Tape Lock

16mm Blade with Dual Scale ABS case with Belt Clip and Tape Lock

CT0135

CT0137

CT0136

5M / 16ft Tape Measure

7.5M / 25ft Tape Measure

10M / 33ft Tape Measure

19mm Blade with Dual Scale ABS case with Belt Clip and Tape Lock

25mm Blade with Dual Scale ABS case with Belt Clip and Tape Lock

25mm Blade with Dual Scale ABS case with Belt Clip and Tape Lock

CT1030

CT1031

CT1032

3M / 10ft Tape Measure

5M / 16ft Tape Measure

7.55M / 25ft Tape Measure

12.5mm Blade with Dual Scale Chrome Body with Belt Clip and Tape Lock

19mm Blade with Dual Scale Chrome Body with Belt Clip and Tape Lock

25mm Blade with Dual Scale Chrome Body with Belt Clip and Tape Lock

CT1823

CT1824

CT1825

3M / 10ft Tape Measure

5M / 16ft Tape Measure

7.5M / 25ft Tape Measure

16mm Blade with Dual Scale Metal and Rubber case with Belt Clip and Tape Lock

19mm Blade with Dual Scale Metal and Rubber case with Belt Clip and Tape Lock

259mm Blade with Dual Scale Metal and Rubber case with Belt Clip and Tape Lock

CT1749

CT1583

CT1584

5M / 16ft Tape Measure

5M / 16ft Tape Measure

8M / 27ft Tape Measure

and ABS case with belt clip Auto lock and Quick release

19mm Blade with Dual Scale Rubber Grip with Belt Clip and Tape Lock

19mm Blade with Dual Scale Rubber Grip with Belt Clip and Tape Lock

CT0657

CT0345

CT0658

5M / 16ft Tape Measure

8M / 27ft Tape Measure

25mm Extra Wide Blade. Metric and Imperial increments. Sliding Thumb Lock. Quick Auto Return. Belt Clip on back.

25mm Extra Wide Blade. Metric and Imperial increments. Sliding Thumb Lock. Quick Auto Return. Belt Clip on back.

NEILSEN

Distributed by Cannon Tools Limited

10M / 33ft Tape Measure 32mm Blade with Dual Scale Inches and Metric with Smooth power tape with Tri-stop for easy use.


Measuring CT0654

CT0655

CT3925

5M / 16ft Tape Measure

8M /27ft Tape Measure

25mm Extra Wide Blade with Thumb lock and Belt Clip

25mm Extra Wide Blade with Thumb lock and Belt Clip

CT0803

CT0802

Section 7

Bi-Directional Laser Measure with Range up to 32M Ultrasonic Meter determines the distance to an object with the ability to calculate the volume of a room. 9V Battery included.

CT3222

5M / 16ft Tape Measure

8M / 27ft Tape Measure

25mm Blade with Dual Scale Inches and Metric Hi-Impact Body with Laser and Spirit Levels

25mm Blade with Dual Scale Inches and Metric Hi-Impact Body with Laser and Spirit Levels

10M Tape Measure

Tape Measures

Dual Scale Fiberglass Tape Fit for construction and home use. With Re-wind handle for retracting the tape.

Tape Measures CT0138

10ft / 3M x 16mm

CT1748

10ft / 3M x 16mm

CT0139

16ft / 5M x 16mm

CT1750

25ft / 7.5M x 25mm

CT0140

25ft / 7.5M x 25mm

CT1751

33ft / 10M x 32mm

CT0141

33ft / 10M x 25mm

CT3223

20M Tape Measure CT3112

30M / 100ft

CT3113

50M / 165ft

Tape Measures

CT0927

13mm wide with Fibreglass Body

Measuring Wheel Durable Lightweight, Compact with 300mm Wheel. Counter adds when the wheel is moving Forward and subtracts in Reverse. Folds down into handy back pack.

CT2612

CT1753

CT2611

30M / 100f Measuring Tape Steel Tape with Auto-Return

30M / 100f Measuring Tape Powered Auto-Return Requires 4 AA Batteries / included.

100M Tape Measure 100M / 330FT x 13mm Dual Scale Graduations High impact ABS case. Extremely durable Fibreglass enforced blade. Dynamic handle for rapid rewind.

www.cannontools.co.uk


Section 7

Leveling & Marking

CT4053

CT0273

CT2867 4 Carpentersâ&#x20AC;&#x2122; Pencils with Sharpener

Carpenters' Pencils Retractable with Plastic Body Works on most surfaces. 12 Long lasting Leads. With sharpener.

12 -7â&#x20AC;? Carpenters' Pencils CT0477

CT0333

Marking Gauge

Heavy Duty Mortise Marking Gauge

CT3716

CT0554

CT0994

2pc Masonry Line Pin Set

3pc Chalk Line Set

2pc Line Level Set

CT1000

5" / 125mm Contour Gauge

18M of Line

CT3792 CT3237 CT3715 80M Brick Line

2 Line Blocks with 18M Line

Plumb Bob and Line 5oz steel bob with approx 15ft of line Ideal for checking vertical structures for plumbers, joiners, builders, plasterers, decorators etc

L - Shaped plastic blocks for easy Line adjustment and storage.

CT3052 100M Brick Line

CT3051 70M Brick Line

CT3720 70M Brick Line

NEILSEN

CT3721

CT3722

CT3723

70M Brick Line

70M Brick Line

70M Brick Line

Distributed by Cannon Tools Limited


Spirit Levels CT2056

Section 7

CT2375

3pc Spirit Level Set Heavy Duty Sizes : 24”, 48”, 72" 600mm, 1200mm, 1800mm

Spirit Level 10" / 250mm Magnetic for scaffolders

Spirit Levels DIY

CT3441

CT0110

12” / 300mm

CT0111

24” / 600mm

CT0113

48” / 1200mm

CT0115

72” / 1800mm

CT4206

Spirit Levels PRO

24” / 600mm Spirit Level

Post Level 3 way spirit level for fence post uprights.

CT0993

Cast Aluminium with Hammer assist pads Ideal for tiling

12” / 300mm

CT0122

18” / 450mm

CT0117

24” / 600mm

CT0118

36” / 900mm

CT4207

24” / 600mm

CT0119

48” / 1200mm

CT4208

36” / 915mm

CT0121

72” / 1800mm

3pc Spirit Level Set 9” Torpedo Pocket Type and Stick-on

CT0116

Spirit Levels Cast Aluminium with Hammer assist pads Ideal for Scaffolding

CT1986

CT1992

Rule with Spirit Levels

Rule with Spirit Levels

500mm

900mm

www.cannontools.co.uk


Section 7

Measuring & Weighing

Pocket Balance CT1023

Pocket Balance - 12 kg

CT1024

Pocket Balance - 25 kg

CT1025

Pocket Balance - 50 kg

CT1026

Pocket Balance - 100 kg

CT1027

Pocket Balance - 150 kg

CT1993

CT2435

Micrometer 0 - 25mm

6" / 150mm Steel Rule

CT2436

CT2482

12" / 300mm Steel Rule

Caliper / Vernier Gauge with Plastic Body

CT0852 CT2351 35kg Luggage Scale

CT2483

with Tape Measure

Vernier Gauge

Rule & Square

with Metal Body

20" / 500mm Multi-Angle Finder

CT3043

CT3340

CT2305

230V Scales with Height Measurement

Digital Vernier Gauge

Digital display Dual screen in Kg or lbs. Ideal for Internet Traders measuring parcels, Gyms, Doctors Surgery and Hospitals Etc. Min Weight: 2kg Max Weight: 200kg Display Resolution : 100g Platter Size: 372 x 272 cm Height Measure : 70 - 210cm Zero - Lock And Tare Button

6” / 150mm Try Square with Spirit Level

with Composite Body

CT0542

12”/ 300mm Try Square

CT2378 Digital Vernier Gauge

Heavy Duty Aluminium Square

with Steel Body

CT0543

14” / 360mm Try Square Heavy Duty Aluminium Square

NEILSEN

Distributed by Cannon Tools Limited


Angle Finding & Measuring

Section 7

CT0353 Rough Square 16" x 24" / 400 x 600mm

CT0352 Rough Square

Try Squares

200 x 300mm

CT2733

6” / 150mm

CT0478

9” / 225mm

CT0104

12” / 300mm

CT3040 600mm Folding Frame Square CT0634

CT0633

Square

Square

6" / 150mm Aluminium

12" / 300mm Aluminium

CT0522

CT0858

CT3041 1200mm Folding Frame Square

6” / 150mm Combination Square

12” / 300mm Combination Square

Stainless Steel Rule

Stainless Steel Rule

CT3042 8” / 200mm Sliding Bevel with Spirit Level

CT1007 Combination Square 12" / 300mm with angle finder

Composite Handle

Sliding Bevels CT0670

CT1998

7” / 175mm

CT0102

9” / 225mm

CT0103

10” / 250mm

Combination Square 12" / 300mm with angle finder

Wooden Handles

www.cannontools.co.uk


Section 7

Woodworking Tools CT0797

CT0334

Mini Brass Hobby Plane

CT0798

Mini Brass Bull Nose Hobby Plane

CT0525

Mini Brass Hobby Plane Scraper

CT0013

CT0014

Jack Plane - No.4

Jack Plane - No.5

12" / 300mm Hand Saw CT3670

CT0015

20” Hand Saw - Rubber Handle

CT0225

Triple Ground Hard Point Saw with 9 Teeth per Inch

CT0526 Spoke Shave

Spoke Shave

50mm Flat Blade

50mm Round Blade

CT2438

Hand Saw 20" / 510mm

CT2003 Wood Mitre Box

CT2260 Hand Saw 22" / 560mm

3pc Wood Rasp Set Flat, Round, Half Round made of T10 steel

CT3221

CT4165 CT3753 Keyhole Saw

Spare Blade Wood Rasp

12" / 300mm

CT0528

250 x 40mm Spare Blade Aluminium Alloy Construction

Heavy Duty TCT Masonry Saw 500mm with 25 Teeth and 17 Tungsten Carbide Tips. Use to cut Brick, Aerated Blocks and Slate

CT0016 Jab Saw 6" / 150mm Dry Wall Saw

CT3650

CT3056 Coping Saw with 5 Blades

Hand Drill 1/4” Double Pinion, Wood Handle Hand Drill

NEILSEN

Distributed by Cannon Tools Limited

Wire Hand Saw Ideal for cutting Metal and Plastic piping. Allows access to confined spaces. Spare Blade included


Wood Chisels & Sharpening Stones CT1690

CT0052

Wood Chisels

3pc Wood Chisel Set

4pc Wood Chisel Set

12, 19, 25mm wide blade.

6, 12, 19, 25mm wide blade.

CT0129

CT1103

CT0004

6mm

CT0005

12mm

CT0006

19mm

CT0007

25mm

CT0030

32mm

CT0032

38mm

CT0033

50mm

5pc Wood Chisel Set

4pc Wood Chisel Set

6, 12, 19, 25, 32mm

12, 19, 25, 32mm

CT0037

Section 7

CT3057

CT0054

6pc Carving Chisel Set

7pc Wood Chisel Set

6pc Wood Chisel Set

Gouge Skew Straight. V-Tool.

6, 10, 12, 19, 25, 32, 38mm

6, 12, 19, 25, 32, 38mm

CT0056 CT3354

CT3357 Boat Shape

Sharpening Stone

8pc HSS 10” Wood Chisel Set

3pc Sharpening Stone Set

Lathe Chisels Parting Scraper Gouge Skew

with Pouch

CT3355

Cigar Shape

Sharpening Stone

CT0901

CT0055

3pc Diamond Stone Set

CT3356

12pc Wood Chisel Carving Set

2"x 6" Coarse, Medium and Fine.

Sharpening Stone 8” / 200mm in plastic a box

CT0823

Extra Fine

CT0824

Fine

CT0825

Coarse

Double Skew, Gouge, Straight, Right Skew, Beading, Spoon Bit, V-Groove, Round Rose

CT0826 CT0130

Sharpening Stone

6” / 150mm Diamond Sharpening Stones

8" / 200mm Aluminium Oxide

Requires Water - No Lubrication needed.

4 Grit / Grade Diamond Sharpening Block Fine | Medium | Coarse | Extra Coarse Size : 150 x 50mm. Can be used wet or dry.

www.cannontools.co.uk


Section 7

Anvils, Clamps & Vices

CT0216

CT2006

CT0232

Mini Anvil

50mm Desktop Baby Vice

Pin Vice 2pc 4" / 100mm

CT0105

CT0480 Pin Vice 4pc 4" / 100mm

Bench Vices 5kg Anvil for worktop mounting

ANVILS CT2734

Anvil - 10kg

CT2735

Anvil - 20kg

CT2736

Anvil - 50kg

CT0098

3” / 75mm

CT0099

4” / 100mm

CT0100

6” / 150mm

CT0101

8” / 200mm

CT3714

4pc Metal Spring Clamp Set Zinc Plated with 32mm Jaws, Rubber Tips and Grips.

CT0664 6” / 150mm Spring Clip

CT4202 Multi-Groove Bench Vice Jaw Pads for 4, 6, 8” Vices Drill Vices CT1699

CT0331

3” / 75mm

CT0332

4” / 100mm

CT2225

2” / 50mm Nylon Ratchet Clamp CT2226

CT1244

Plastic Folding Saw Horse

NEILSEN

Distributed by Cannon Tools Limited

Carpentry Bench Vice 6 inch / 155mm wide

4” / 100mm Nylon Ratchet Clamp


Clamps CT0379

CT1407

Section 7

CT1968

3pc Mini G-Clamp Set 6pc Nylon Spring Clamp Set - 65mm

1”, 2”, 3" 25, 50, 75mm

6” / 150mm Ratchet Bar Clamp

CT0381 G-Clamps

CT1408

CT0017

2” / 50mm

2pc Micro Spring Clamp Set

CT0018

3” / 75mm

CT0019

4” / 100mm

6" / 155mm

CT0020

6” / 150mm

2pc Ratchet Bar Clamps

CT0380

4” / 100mm Nylon Jaws Strong and Lightweight

4pc Nylon Spring Clamp Set 90mm

CT0021

8” / 200mm

CT0022

10” / 250mm

Ratchet Clamps CT1410

12” / 300mm

CT1411

18” / 460mm

CT1412

24” / 610mm

CT1413

30” / 760mm

CT1414

36” / 915mm

CT0412

G-Clamps CT0361

2” / 50mm

CT0362

3” / 75mm

CT0363

4” / 100mm

CT0327

6” / 150mm

CT0328

8” / 200mm

CT0329

10” / 250mm

100mm Quick Clamp with Nylon and Rubber Jaws Pressed Steel Fram

CT0413 F-Clamps

150mm Quick Clamp with Nylon and Rubber Jaws Pressed Steel Fram

CT1518

50 x 150mm

CT1519

50 x 300mm

CT3335

80 x 300mm

CT1520

80 x 600mm

CT3331

300 x 120mm

CT3332

500 x 120mm

CT3333

800 x 120mm

CT3334

1000 x 120mm

www.cannontools.co.uk


Section 7

Hobby & Utility Knives

CT2474

CT0424

CT0560

9mm Folding Utility Trim Knife

Utility Knife

Craft Knife

Non-Retractable with 2 Spare Blades

CT0516

Folding Lock-Back Knife With Quick Change Mechanism 5 Extra Blades and Storage Pouch

with 9mm snap-off blades

CT3261

CT0983

9mm Utility Knife with quick return

Folding Utility Trim Knife

Utility Knife - Anti-slip Rubber Grip Pre-loaded with 8 Auto-load 9mm Snap-off Blades

CT1193

Utility Knife with 5 Blades

CT3044

Penknife style with spare blades

CT1741

18mm Folding Utility Trim Knife

CT0148

Utility Knife

Utility Knife Anti-slip Rubber Grip Pre-loaded with 8 Auto-load 18mm Snap-off Blades

Lock-back knife with blade storage handle

CT3740

Retractable with Blade

CT3859 CT0147

Folding Utility Trim Knife Utility Knife Retractable with Blade and Plastic Holder

Quick change Blade With 5 standard utility knife blades

2pc Snap-Off Blade Knife Set with retractable 9mm and 18mm Blades

CT0557 CT0446

CT3647 Automotive Emergency Knife

Folding Knife With Window Breaker and Seat Belt Cutter 153mm long

10pc 9mm Snap-off Blades 13pc Hobby Knife Set

CT1349

Includes 3 Aluminium Handles 10 Assorted Blades with different uses.

CT0447

70mm

CT1348

95mm

CT1347

115mm

CT3045 10pc 18mm Snap-off Blades

51pc Hobby Knife Set 37 Assorted Blades. Sharpening Stone 5 Needle Points, and Glue.

CT2127 Hobby Knife with 5 spare blades

NEILSEN

Distributed by Cannon Tools Limited

Stainless Steel Locking Knifes Serrated Blade with Pocket clip. Display of 20 in 3 Colours


Blades & Scrapers CT0951

25mm

Scrapers

CT0546

50mm

Rubber Handles

CT0547

75mm

CT0548

100mm

CT0549

125mm

CT0952

125mm

CT2383

Section 7

CT3488 Knife Blade Scraper

5-in-1 Deluxe Scraper

with standard utility knife blade

CT2569 CT0366

Knife Blade Scraper with Stubby Handle

3pc Scraper Set

CT3107

1", 2", 3" . 25, 50, 75mm

CT2968

25mm

CT2969

50mm

CT2970

75mm

CT2971

100mm

Scrapers Wooden Handles

10 Scraper Blades

CT3484

Suitable for CT2569 and CT0608

CT0608 12pc Steel Wool Pack

Utility Knife Blade Scraper 12" / 300mm Long with Spare Blades in Handle

Multi-grade

CT3609

CT2348 Floor Scraper 12" / 300mm Blade Fibreglass Handle

CT3968 Floor Scraper Heavy Duty with Hardwood Handle 1645mm overall length 170mm wide blade. For heavy duty jobs like scraping cement / plaster and ice.

Scraper Set CT0559

Razor Blade Scrapers with Safe Guard, Long Reach and Standard Scrapers.

10pc Blade Dispenser

CT3712

CT1194 50pc Blade Dispenser

4â&#x20AC;? / 100mm Heavy Duty Scraper with 300mm Long Handle. Suitable for removing wall coverings or silicon and paint from glass or tiles.

www.cannontools.co.uk


Section 7

Tile Cutting, Tube Cutting & Bending

CT0739

CT1006

CT1356 Tile Cutter

Mini Tube Cutter

Light Duty

3 - 22mm Diameter Pipe and Tube Cutter

Ideal for Cutting Ceramic or Glazed Tiles up to a Maximum width of 12â&#x20AC;? / 300mm.

Pipe Bender CT1927

15mm

CT1928

22mm

CT1929

28mm

Accurately bends 6mm, 8mm and 10mm pipe or tubing up to 180 degrees

Electric Tile Cutter & Discs on Page 185 CT0238

Tube Cutters

CT1357

Clip on and rotate. Self adjusting. Self locking Extra cutting blade included.

CT4134

8mm

CT4135

10mm

CT4147

15mm

CT4148

22mm

CT4149

28mm

Tile Cutter Heavy Duty

Pipe Bender For 15 and 22mm Pipe with heavy gauge steel former, 2 anodised aluminium guides, and cushion grip handles.

Tungsten Carbide Steel Cutting Blades. Cuts 30 - 80mm Diameter Holes. Cuts Straight or at 0 to 45 Degree. Maz. width 18â&#x20AC;?/ 460mm. Max. Cutting Depth - 14mm.

Tube Cutters Clip on and rotate. Self adjusting. Self locking

CT3055

CT2615

Glass Cutter - 125mm

CT1588

Ratchet Tube Cutter

CT1698

Capacity : 3 - 23mm Cuts without having to rotate completely around tubing. Stainless Steel, Copper and Aluminium.

Pipe Bender Heavy duty for 15 and 22mm Pipe, with 2 anodised aluminium guides.

CT3732

CT0705

CT3033

Tube Cutter with Stainless Steel Blade. For Soft Materials like PVC , PPR, PE and PEX Tubing.

CT0085

Silicon Wiper Blade

22mm Aluminium Pipe Bending Guide

3pc Plastic Spreader Set 100, 130, 160m. Easy Clean.

CT1712 CT3856

Tube Cutter Cutting Diameter 42mm / 1-5/8in. Ratchet mechanism for cutting most kinds of plastic

NEILSEN

Distributed by Cannon Tools Limited

2pc Aluminium 15mm & 22mm Pipe Bending Guide Set

Double Sided Foam Adhesive Tape


Caulking & Plumbing Tools CT1303

CT3239

Section 7

CT3103

Vacuum Suction Cup

Drain Cleaner with flexi-wire and brush end.

11” Caulking Gun Steel Skeleton Frame and Handle with Plunger Release Lever. Suitable for most 380 - 425ml Cartridges.

CT0385

CT3102

CT3718

Drain Cleaner with flexi-wire and 'Cork Screw' end

Rubber Plunger 6”Ø with plastic handle Caulking Gun Heavy Duty Steel Frame and Plunger with cast aluminium handle. 11”| 275mm Suitable for most sealant cartridges.

CT0963

CT2453 12pc Drain Rod Set

Drain Buster

100mm rubber plunger. 50mm double worm screw. 10 x 920mm Polypropylene drain rods for General Purpose Domestic Drain Cleaning. With Crimped and Pinned End Connections which should only be rotated in a clockwise direction.

CT2440

Plumbers Utility Key Used for meter cupboards, stop cocks, taps and radiators

CT0787

CT1931

2pc 170mm Manhole Cover Key Set

CT1004

Heavy Duty carbon steel

CT0788

Radiator Key for Domestic Radiators

Vacuum Suction Pump

CT0988

Manhole Cover Key Length : 18” / 480mm Heavy Duty carbon steel

Large Displacement Capacity Ideal for Unblocking Sinks, Toilets and Baths.

CT3307 Tap Re-set Tool

CT1961

11/16” - 3/4” - 1” for all 1/2” and 3/4” taps

Stop Tap Key Clutch type

CT2877 2pc Thread Sealing Tape Set

Suction Gun Power Drain Cleaner with 4 Adaptors

www.cannontools.co.uk


Section 7

Painting & Decorating

CT3319

CT2903

Magnetic Paint Brush Holder

100mm Wall Brush

CT3494

12pc Foam Brush Set CT3486

10pc Paint Brush Set - 12, 25, 50, 75, 100mm

CT2904

25, 50, 75, 100mm Wide

150mm Wall Brush

CT3295

CT3485 Wall Brush

CT3487

40 x 140mm 65mm Bristles

Paint Roller Kit 100mm easy push-on Foam and Fabric Rollers.

CT3495 3pc Paint Brush Set Sizes : 25, 38, 50mm

CT3796 Paint Roller Handle 250mm to fit CT3492 set

CT0360

Paint Roller Kit 100mm 3 x Fabric, 3 x Foam Rollers with Tray

CT3496 5pc Paint Brush Set

CT3492

with plastic handles

3pc Paint Roller Set

CT0668

10pc Paint Roller Set 100mm Fabric and Foam

10" / 250mm for CT3796

5pc Paint Brush Set Sizes : 12, 25, 38, 50, 62mm Pure Bristles with Wooden Handles

CT1132

CT3493

Wallpaper Scissors 10" / 250mm Professional

3pc 9" / 230mm Paint Roller Set

CT3845 CT3644

9” / 225mm Large Coverage Paint Roller Paint Reservoir Capacity - 0.54 Litres. 3/8” Stainless Steel Roller Frame.

NEILSEN

Distributed by Cannon Tools Limited

CT3906

9” / 225mm Perforated Roller Cover 4 Decorating Cloths 250g Mixed Fibres Note - size and colour may vary

3/8in. Nap for Smooth to semi-smooth surfaces Works with the Rapid Roller CT3845 and any other 9”paint roller system. Easy clean.


Workwear - Gloves & Knee Pads CT3844

9” / L

CT3843

9” / L

Section 7

CT0043

Leather Knee Pads PVC Work Gloves

Knitted Gloves

With anti-penetration and cut resistant abilities. Supplied in bags of 12

CT3833

9” / L

CT3834

10” / XL

CT3710

with PVC Dots for. Supplied in bags of 12

Knee Pad Inserts CT3840

9” / L

for work trousers. Light / Soft and Flexible for optimum working comfort.

CT1038

Latex Coated Work Gloves

Crinkle Latex Coated Work Gloves

with Fleece Lining. Supplied in Bags of 12

Supplied in Bags of 12

CT3835

9” / L

CT3841

9” / L

CT3836

10” / XL

CT3842

10” / XL

Knee Pads with Plastic Cups

CT2121

PU Work Gloves Supplied in Bags of 12

CT3837

8” / M

CT3838

9” / L

CT3839

10” / XL

Latex Coated Work Gloves Lightweight PU. Supplied in Bags of 12

Crinkle Latex Coated Work Gloves

Knee Pads

Supplied in Bags of 12

Lightweight and Tough

Snow Shoes Rubber Over Shoes

CT2960

Small

CT2961

Medium

CT2962

Large

Cleats bite into snow and ice providing tractiony. Flexible rubber stretch to fit most shoe sizes.

CT1071

Gel Centre Knee Pads Extra wide neoprene straps Large plastic cups for greater protective coverage

www.cannontools.co.uk


Section 7

Workwear - Goggles, Ear Defenders, Welding Masks & Tool Belts

CT3348

CT2471

CT1557

Safety Glasses

Safety Glasses 4 of each colour sold individually

Safety Glasses

with LED Lights and Spare Batteries

CT3787

CT3788

CT0896

Safety Goggles

Safety Goggles

Vented Design to stop misting with Polycarbonate Lens and adjustable strap

Sealed Design Polycarbonate Lens. with Flexible Frame and adjustable strap.

5 Disposable Masks with Exhalation Valves Light and comfortable. High level of protection - FFP3 NR

CT3705

CT3711

CT0312

Foam Ear Plugs

Ear Defenders Lightweight Sturdy Construction with CE certfication

Folding Ear Defenders EN352-1. 2002 25/28 decibels.

Signal Noise Ratio 33 Decibels protects from excessive noise, will adapt to fill the ear canal.

CT0529

CT0530

CT0564

CT2093

CT0073

CT1713

Welding Masks / Helmets with Wide Viewing Area with Auto-Darkening CT0071

CT0072

Drill Holder

Tape Holder

CT0040

CT0041

Smal Leather Tool Belt

NEILSEN

Swivel Hammer Loop

Distributed by Cannon Tools Limited

Mobile Holder

CT0042

Medium Leather Tool Belt

Large Leather Tool Belt


Workwear - Tool Belts, Tool Bags & Boxes CT0233

CT0237

Section 7

CT0210

Tool Belt

Tool Belt

Tool Belt

11 Pocket Professional

11 Pocket Heavy Duty

9 Pocket Pink Leather

CT0822

CT1062

CT0819

Tool Belt

Tool Belt

Tool Belt

Double Pocket Oil Tanned

Double Pocket Oil Tanned

16 Poccket Heavy Duty

CT0077

CT0821

CT0076

Nail Bag with Zip

Scaffolding Rig

CT1714

Money Bag

Leather Apron

Black Grain Oil Tanned

CT0234

CT1972

CT0049 12 Pocket Tool Roll

Tool Box with Radio

12 pocket Tool and Chisel Roll Made of Suede leather.

CT1375 CT0044 760mm / 30" Rope Handle Tool Bag

CT0074

30”

CT0075

36”

18” / 460mm Tool Bag

Jute Bags

Extra wide opening

CT0047

18”

CT0046

24”

CT0045

30”

Tool Bags with Zip

CT1110

16” Tool Bag Shoulder Strap. Extra Wide Opening. Reinforced PVC Base.

CT3431

23” Tool Box Size - 590 x 280 x 275mm.Heavy Duty Stainless Steel with grooved channel for support when cutting on-site.

www.cannontools.co.uk


Section 8 CT0061

15M

CT0062

30M

CT0063

50M

Garden Hose, Spray Guns & Accessories CT0376

Brass Tap Adaptor & Hose Connector Set Suitable for 3/4” BSP threaded exterior taps. Brass Female quick fix and water stop adaptors.

CT0377 Brass Tap Adaptor for Garden Hose Suitable for 3/4” BSP threaded exterior taps.

CT0461

Garden Hose 1/2” Diameter. Kink Resistant and Easy to Clean. 3 Ply Polyester Fibre Reinforced Garden Hose.

CT0262 Threaded Tap Connectors 3/4 - 1/2 inch Bag of 20

CT0265 Water Outlet Fitting with Jubilee Clip Bag of 20.

3/4” Male Adaptor Hose Connector Bag of 20.

CT0270 CT0749 Multi-Tap Connector Bag of 20

CT0752

Hose Connector Mender / Joiner 1/2” Repair two hose pipes or join two hose pipes together. Bag of 20

CT0751 3 way Hose Adaptor

Hose Connector 2 Way Tap Adaptor

CT0750

1/2” Bag of 20.

3 way Hose Adaptor

CT0462

2 threaded outlets with shut-off valves Bag of 20

Hose Connector Coupling Coupler

2 male outlets with shut-off valves Bag of 20

CT0264 Hose Connector

Bag of 20.

CT0463

CT0466

3 Way Hose Connector Coupling Coupler Bag of 20.

5 Function Spray Gun

1/2” Fast connector for spray guns etc. Bag of 20

CT0263 Auto Shut-off Connector

CT1779

1/2” Fast connector for spray guns etc. Bag of 20

Spray Nozzles Adjustable Spray Quick Fix Fitting Bag of 20

CT0266 6 Function Spray Gun

Hose Reel Trolley 300mm wide fits up to 45M hose.

CT2332

CT2333

6 Function Spray Gun

NEILSEN

CT3457

7 Function Hose Spray Gun Distributed by Cannon Tools Limited


Water Sprayers & Wash Brushes CT1011

Section 8

CT1012 2 Litre Pump Sprayer Hand Pressure Sprayer with Adjustable Nozzle

500ml Hand Sprayer Chemical Resistant Spray Bottle Ideal for Water and other Liquids Adjustable Spray with Trigger Action

CT1013 CT1696

5 Litre Sprayer Pump Sprayer Easy to Operate Quick-Release Trigger Lock Fully Adjustable Nozzle With a Pressure Relief Valve Adjustable Shoulder Belt

Telescopic Wash Brush Extends from 1.6 to 1.78M

CT0236

CT1697

8 Litre Hand Pump Sprayer

Telescopic Wash Brush

1.2M flexible hose. 2.5 BAR Maximum capacity : 10L Working capacity : 8L Adjustable spray pattern mist to stream.

Extends from 1.12M to 2.5M

CT2840

CT2352 Telescopic Wash Brush and Squeegee Extends from 1.3 to 3M

CT2340 CT2920

5 Litre Sprayer 6 Volt

3.5M Telescopic

Window Cleaner

5 litre Battery Powered Sprayer with a 6 Volt Rechargeable battery providing 2 hrs working time. Total spray volume after full charge : 35L to 40L

16 Litre Hand Pump Sprayer

1.2M Hose. 1.5 - 4.5 BAR Carry without discomfort for long periods of use.

www.cannontools.co.uk


Section 8

Garden Tools

CT0250

CT0248

CT0249

Hand Cultivator

Hand Fork

Hand Hoe

CT0259

CT1183

CT0151

3pc Garden Tool kit

3pc Garden Tool kit

with Aluminium Blades

with Wooden Handles

CT3472

CT3926

Hand Fork

CT3927 Grafting & Budding Knife - 7”

Pruning Knife 3" / 57mm Folding Stainless Steel

Grafting Knife Stainless Steel Blade and Wood Handle. For small branch cutting, shrub or tree grafting.

CT2318 CT3470

CT0108

Gardening Shears Folding Pocket Snip

12" / 300mm with Wood Handles

CT2080

Pruning Shears

Pruning Saw

CT3469

Wooden Handle 12” / 300mm Folding blade

8" / 200mm Dipped Handles

CT2081

CT3361 Pruning Shears 8" / 200mm Metal Handles

Pruning Shears 8" / 200mm with Stainless Steel Blades

CT3471

CT3285

Deluxe Ratchet Garden Secateurs

NEILSEN

Distributed by Cannon Tools Limited

Pruning Shears 8" / 200mm Wood Handles

Weed Slasher 800mm long


Garden Tools CT3468

CT3467

CT3465

Telescopic Trowel 27"- 37"

Telescopic Weeder 24" - 35"

Telescopic Knife 26" - 36"

CT3466

CT3463

CT1179

TelescopicFork 25" - 35"

Telescopic Garden Shears

21” with steel handles

CT3460

CT3459

By-pass Tree Lopper

Telescopic By-pass Tree Lopper

CT3462

CT3461

CT0472

Telescopic Ratchet Tree Lopper

Telescopic Ratchet Tree Lopper

with Wooden Handle

Section 8

Hedge Shears

CT3464 Side Cutting Border Shears

Bill Hook

CT3359 18” Machete with Canvas Pouch

CT3067 Extending Tree Lopper with Pruning Saw

CT3360 20” Machete with Canvas Pouch

CT0364 Long Bill Hook Length : 1550mm Heavy Duty Slasher with Hardwood Handle and Steel Head.

www.cannontools.co.uk


Section 8

Axes - Tree Felling & Wood Cutting

CT3848

CT0535

600g Hand Axe

Kindling Axe 180mm forged steel blade for splitting small logs or thin timber or planks.

CT0280

CT0279

1.25lb Hand Axe

with Steel Shaft and soft grip handle.

CT1299

14” Wooden handle.

CT1297

1.5lb Hand Axe

1.5lb Hand Axe

14” Fibreglass Handle with Rubber Grip.

with Fibreglass shaft and Rubber Handle.

3lb Axe Hammer Log Splitter with Fibreglass Handle.

CT1300

CT1298

CT3047 165mm Log Bomb

CT3046 Axe Hammer - 6 lb

Felling Axe - 4 lb

Log Splitter with Fibreglass shaft and Rubber Handle.

with Fibreglass shaft and rubber handle.

CT0278

NEILSEN

6lb Log Splitting Wedge

CT1359

Felling Axe - 4lb

36” Axe Handle

32” Wooden handle.

Replacement Axe Handle for felling axe.

Distributed by Cannon Tools Limited

www.cannon.co.uk


Tree Cutting & Shredding CT3273

CT3270

Long Knife

8 ton Vertical Log Splitter

for CT3270 Log Splitter

6.5Hp, OHV Engine Cutting capacity : 32-400mm Ă&#x2DC;. Max.length: 106cm, 80cm, 61cm.

Section 8

CT3271 Cross Knife for CT3270 Log Splitter

CT3272 Obtuse Knife for CT3270 Log Splitter

CT1939

500g Mattock Mini Mattock with Fibreglass shaft and Rubber Handle

CT0428

CT0427

5lb Pick / Mattock Head

7 lb Pick Axe Head

CT2258 CT0429 5lb Mattock Head Replacement Pick Handle with Fibreglass Shaft 10 X Stronger than conventional Wooden Handles Can be used with either Pick or Mattock Heads

CT1985 Replacement Pick Handle Wood Shaft

CT2434 Chipper & Shredder 6.5hp, 4 stroke petrol engine Cutting Diameter : 2" / 50mm 2-Way Feed Wheels : 10" / 250mm Weight : 72Kg Makes quick work of chipping and shredding branches, large, drop-in steel hopper or chipper chute

www.cannontools.co.uk


Section 8

Chain Saws & Accessories

CT2292

CT2298

Chain Saw

Chain Saw

17”/ 440mm 2hp 2 Stroke engine Displacement : 45cc Power : 1.5kw Approx Fuel Mixture Ratio: 25:1 Ignition System: C.D.1 Guide Bar : 440mm Chain Pitch : 0.325” Auto Chain Oil Feed

CT2292B

12” / 300mm 2 Stroke engine Displacement : 25.4cc Power : 800W Approx Fuel Mixture Ratio: 25:1 Guide Bar : 300mm Idling speed : 3000±300rpm Fuel tank capacity : 230ml Oil tank capacity : 160ml Automatic oiler keeps chain lubricated throughout use

Immediate Stop / Chain Brake System

MT-9999

CT3795

Chain Saw - 20in. Maximum engine power : 2.2KW Engine rated speed : 8500 min?1 Max engine speed : 11000rpm = 21m/s Fuel : Unleaded Petrol / 2 stroke oil Fuel tank capacity : 550cm3 Oil tank capacity : 260cm3 Engine displacement : 53cm3 Max. cutting length : 470mm

Chain Saw Petrol Chain Saw with 12” and 20” Bars Maximum engine power : 2.2KW Engine rated speed : 8500 min?1 Max engine speed : 11000rpm = 21m/s Fuel : Unleaded Petrol / 2 stroke oil Fuel tank capacity : 550cm3 Oil tank capacity : 260cm3 Engine displacement : 53cm3 Max. cutting length : 470mm

Immediate Stop / Chain Brake System

CT2912

CT2946

12” / 300mm

CT2947

18” / 460mm

CT2948

20” / 510mm

CT3799

Chain for Chain Saws

Chain Saw Bag

Chain Saw Blade Sharpener 230V / 130W / 50Hz No-load Speed : 3000rpm 100mm Diameter Grinding Disc. Chain vice adjusts to any pitch and shape. Suitable for wall or bench mounting. Heavy duty steel base with safety guard.

Strong / Robust Chain Saw Holdall suitable for all Cahin Saws up to 17”

CT3049

4.0mm

CT3050

4.8mm

CT3131

Chainsaw Files CT2913 Spare Grinding Disc 100 x 3.2mm for CT2912 above.

Chain Saw Sharpening Kit Sizes : 4.0, 4.5, 4.8, 5.5mm Diameter.

NEILSEN

Distributed by Cannon Tools Limited


Chain Saw Replacement Parts CT3795-1

CT2292B-8

CT2292B-15

12” Chain

Carburettor

Fuel Tank Caps

300mm Chain for CT3795

for Chain Saws CT2292B MT9999 | CT3795

for Chain Saws CT2292B MT9999 | CT3795 Bag of 10

CT2292B-9

CT2292B-16

CT3795-2 12” Chain Saw Bar

Ignition Coil

Oil Filters

300mm Chain Bar for CT3795

for Chain Saws CT2292B MT9999 | CT3795

for Chain Saws CT2292B | CT3795 Bag of 50

CT2292B-1

CT2292B-10

CT2292B-17

20” Chain

Replacement Spark Plugs

Replacement Fuel Filters

for Chain Saws CT2292B | CT3795 Bag of 20

for Chain Saws CT2292B | CT3795 Bag of 20

CT2292B-2

CT2292B-11

CT2292B-18

Chain Sprocket

Replacement Clutch

Replacement Chain Adjusters

for Chain Saws CT2292B | CT3795

for Chain Saws CT2292B | CT3795 Bag of 50

CT2292B-12

CT2292B-19

Oil Pump Worm Gear

Replacement Oil Seals

for Chain Saws CT2292B MT9999 | CT3795

for Chain Saws CT2292B MT9999 | CT3795

CT2292B-3

Pull Start

CT2292B-4

Braker

for Chain Saws CT2292B | CT3795 Bag of 20

CT2292B-5 Oil Pump

Section 8

for Chain Saws CT2292B | CT3795 Bag of 25

for Chain Saws CT2292B MT9999 | CT3795

CT2292B-6 20” Chain Saw Bar

CT2292B-13

CT2292B-20

On/Off Switches

Gaskets / Washers

for Chain Saws CT2292B MT9999 | CT3795 Bag of 20

for Chain Saws CT2292B | CT3795 Bag of 25

CT2292B-14

CT2292B-21

Oil Tank Caps

Replacement Bumper Spike

for Chain Saws CT2292B

for Chain Saws CT2292B | CT3795 Bag of 10

CT2292B-7

for Chain Saws CT2292B | CT3795 Bag of 25

Braker

www.cannontools.co.uk


Section 8

Garden Tools

CT2836 Garden Trimming Tool Set 4 in 1 Multi Function Garden Tool Petrol Engine : 32.6cc Output power: 1000w Noise Level : 118 dB Shaft diameter: 26mm Attachments : Rotary Blade diameter : 255mm Strimmer / Nylon Cutter diameter : 415mm Chain Saw / Pole Pruner length : 300mm Hedge Trimmer / Pole Pruner length : 450mm

CT2355

CT2356

CT2357

CT2358

Strimmer Line 1.25mm x 15M

Strimmer Line 1.65mm x 15M

Strimmer Line 2.0mm x 15M

Strimmer Line 2.4mm x 15M

CT1981

CT3458

Hedge Trimmer 110V / 550W

3pc Garden Twistee Set

Cutting blade length: 530mm Max cutting diameter: 14mm Frequency : 60Hz

3 x 30M

CT3849 5M Garden Tie Ideal for securing Plants, Shrubs and Saplings.

CT0717

CT1651

CT3640 Easy Reach Pick-up Tool 76mm Long Litter Picker

Garden Wire Twist and Tie 2 x 40M Rolls of 0.55mm Metal Wire For Tying back plants and shrubs. Also small fence repairs

CT3850

16 White Plastic Plant T Label Tags Leaf Blower & Vacuum 230V / 2200W / 6000-18000rpm Mulches 10 to 1270 Kmh Shoulder Strap. Lever Change Action

NEILSEN

Distributed by Cannon Tools Limited

6cm x 4cm Label area x 14cm tall The â&#x20AC;&#x2DC;Tâ&#x20AC;&#x2122; Shaped plastic plant tags are ideal for displaying information about particular plants. They can be easier to read than the stick-in plant labels.


Cordless Garden Tools CT3811

CT3819

Section 8

CT3820

36V Cordless Chain Saw 3Power : 36V / 3.0Ah Operational time : 15 min approx. Charging time : 150 min. Blade length : 30cm / 12in. Capacity oil tank : 170ml Battery and Charger NOT included

36V Battery Pack for Cordless Garden Tools

36V Battery Charger for Individual Garden Tools CT3810, CT3811, CT3812, CT3813, CT3814, CT3815, CT3818

CT3818

CT3810

36V Cordless Brush Cutter

36V Cordless Lawn Mower

Power : 36V / 3.0Ah Operational time : 30min. approx Charging time : 150min. Brush cutting width : 25.4cm Grass Trimming width : 30cm Length : 180cm Battery and Charger NOT included

Power : 36V / 3.0Ah No load speed : 3500rpm Operational time : 25min / 250 sqm. Cutting Width : 37cm Height adjustment : 6/25-75mm Capacity of catcher : 50L Battery and Charger NOT included

1 Battery & Charger with Multiple Variations CT3812

CT3813

36V Cordless Pole Saw

36V Cordless Strimmer

36V Cordless Tool Handle

Power : 36V / 3.0AhCutting length : 18cm No load speed : 3380/min Oil tank volume : 60ml Operational time : 45min. Approx Total length : 294cm Battery and Charger NOT included

Power : 36V / 3.0Ah Cutting width : 28 - 33cm Strimmer Line : 1.4mm No load speed : 8000/min Operation time : 50min. approx Total length : 163cm Battery and Charger NOT included

3 in 1 Battery Handle Unit To fit CT3812, CT3813, CT3814 Battery and Charger NOT included

CT3816

CT3814

36V Cordless 3 in 1 Tool Exyension Tube To fit CT3812, CT3813, CT3814

CT3815

36V Cordless Hedge Trimmer Power : 36V / 3.0Ah Cutting length : 40cm Max cut diameter : 14mm Cutting speed : 2600/min Operation time : 50min. approx Total length : 194cm Battery and Charger NOT included

www.cannontools.co.uk


Section 8

Lawn Mowers & Rollers

CT1653

CT0850

Lawn Mower 230V / 1400W / 50hz Cutting Height : 18 - 66mm No Load Speed : 2800rpm Cutting Width : 380mm 50 Litre Grass Box

Lawn Mower Petrol Lawn Mower Power : 5Hp 4-stroke OHV Engine Displacement : 173cc Idle Speed : 2900rpm Cutting Width : 508mm Grass catcher : 65 litres

CT0471

CT3810

Lawn Mower

36V Cordless Lawn Mower

Petrol Ride-on Lawn Mower Max Torque : 11.5Nm at 3060rpm Max. Power : 4.8kw / 6.5hp at 3600rpm Idle Speed : 1850rpm Petrol consumption : 0.9 Lph Fuel tank capacity : 1.1L Battery : 12V / 7AH Blade width : 25in. / 630mm Cutting width : 24in. / 610mm

See previous page for details.

CT2959 Lawn Roller CT2958

16" Diameter Drum

Lawn Mower for ATV’s 46” Heavy Duty Lawn Mower 16HP Vertical Shaft Engine Electric Start 3600rpm Oil Capacity : 13 litres 8-10 km/h cutting speed 35 km/h Maximum Towing Speed Cutting Height - 1in-10in / 25 - 250mm With 12V DC Battery Cutting Width - 46in / 1168mm Tow Ball - 50mm G.W - 210kg N.W - 183kg

NEILSEN

Distributed by Cannon Tools Limited


Fencing - Post Hole Diggers CT2293

CT2294

100mm Ø

Ground Auger Drill

CT2295

150mm Ø

with 49cc Petrol engine and Drill - 75 x 750mm

CT2296

200mm Ø

Section 8

Ground Auger Drills 750mm Long

CT2870

CT2347

Active Gear

Post Hole Digger / Auger 160mm Diamter x 1M Painted Silver with Wooden Handle

for Ground Auger CT2293

CT2871 Pull Cord for Ground Auger CT2293

CT4092

CT1148 Post Hole Digger 1510mm with Fibreglass Handles and Rubber Grips

CT3969 Post Hole Digger 6.5kg Fence Maul 36” Fibreglass Shaft for Fence Posts with Precision Cast Head

Hardwood handles and steel blades. 1530mm Overall Length.

CT1841 CT2839 Fencing Spade 54" All Steel

CT3474 Post Hole Digger - 17lb 36mm Wide Blade 1720mm Long

Electric Spray Gun - 600ml / 900mln 230V / 50Hz / 100W. Operation - 280ml / 5min Spray Nozzles - 0.6. 0.8. 1.0mm

www.cannontools.co.uk


Section 8

Garden Hoes, Rakes & Snow Pushers

CT0158

CT0161

CT1070

Dutch Hoe

Dutch Hoe

Hoe Handle

with steel handle

1200mm Long Beech Wood

CT0157

CT0155

CT1153

Garden Rake

Leaf Rake

Bow Rake - 1430mm Long with 16 teeth, Fibreglass handle and Rubber Grip

CT1987

CT1988

CT0465 Pop-Up Garden Bag

12 Tooth Rake Head

Leaf Rake Head CT2996

CT2825

Snow Pusher

Plastic Snow Shovel

Overall Length : 140cm Pusher size : 66cm x 32cm Steel tube, foam grip with Metal blade.

NEILSEN

Distributed by Cannon Tools Limited

CT3038 Snow Shovel


Dustpans, Shovels & Spare Heads CT2819

CT2822

Section 8

CT2878

4” / 100mm Coal Shovel

Metal Dust Pan CT3473

CT2820

3lb Hoe Head CT2537 Draining Tool Head

5” / 125mm Coal Shovel

12" / 300mm Metal Dust Pan CT2538 CT1469

Round Mouth Shovel Head

CT2821 9” / 230mm Coal Shovel

16" / 400mm Metal Dust Pan

CT2535 Cable Laying Spade Head

CT0080

Garden Claw

Check out the Website for full product information www.cannontools.co.uk

CT3561 Edging Knife Head

CT2536 Trenching Fork Head

Don’t forget to refresh your browser or clear your internet history to see the latest products and changes. www.cannontools.co.uk


Section 8

Spades

CT0168

CT0166

CT0162

Border Spade Stainless Steel

Digging Spade Stainless Steel

Digging Spade

CT2529

CT2530

CT2531

Digging Spade Irish Type

Digging Spade

Border Spade

CT0164

CT1150

CT0156

Border Spade

Drainage Spade Fibreglass Handle

Edging Knife

CT1997 Spare Wood T-Handle CT0267

CT0091

Steel Shovel

Shovel No.2

CT0144 Spare Shovel Handle

NEILSEN

Distributed by Cannon Tools Limited


Forks & Shovels CT0167

CT0169

CT0165

Digging Fork Stainless Steel

Border Fork Stainless Steel

Border Fork

CT0163

CT2532

CT2539

Digging Fork

Border Fork 32â&#x20AC;?

Digging Fork 32â&#x20AC;?

CT1152

CT1151

CT1149

Garden Fork

Scoop Shovel Aluminium with fibreglass handle

Square Shovel

with fibreglass handle

Section 8

1480mm long fibreglass handle

www.cannontools.co.uk


Section 8

Rotovator, Rotary Sieve & Accessories

CT2067

CT0611

Petrol Rotovator 6.5hp 4 Stroke OHV Engine Displacement : 208cc Recoil Start System Tilling Depth : 175-350mm Rotation Speed : 3300rpm Belt Drive with Gear Shift -1-0-1 Tilt Cylinder : Forced Air Cooling Max Power : 4.5 Kw

230V Foldable Rotary Sieve with detachable handles and large wheels for easy transport. For sifting Gravel, Soil and Sand. Supplied with Drogue and Collection bag Motor : 230V / 50HZ Rated Power : 360W Drum Diameter : 375mm Drum Length : 785mm

CT2850

CT2849 Forward Belt to fit Rotovator CT2067 - Part No 18

CT2845 Reverse Belt

Rotovator Reverse Cable

to fit Rotovator CT2067

to fit CT2067

CT2853

CT2851

Rotovator Gearbox

Rotovator Left Tine

to fit CT2067

to fit CT2067

CT2852

CT2848 Rotovator Right Tine

Rotovator Tine Shaft

to fit CT2067

to fit CT2067

Wheels to fit CT2067

NEILSEN

Distributed by Cannon Tools Limited

CT2846

Left

CT2847

Right


Multi-Functon Garden Machine / System CT3324

CT3325

Multi-Functional Rotovator

Tiller / Rotovator to fit CT3324 Tilling Width : 620 mm Number of Tines : 24 Tines Diameter : 330 mm Ø Tilling Depth : 200 mm Tilling Speed : 320 rpm Net / Gross Weight : 28.1 / 30.5kg Produc Dimension : 63 x 61 x 32 cm Carton Dimension : 58 x 55 x 37.50 cm

Air-Cooled OHV 4 stroke 6.5hp Engine Engine Speed : 3600rpm. Fuel Capacity : 3.6 litres 2 forward + 2 reverse Gears PTO Speed : 920 / 675rpm Tyre Diameter : 420mm Distance Between Wheels : 400mm Net / Gross Weight : 63 / 66kg Dimensions : 153 x 140 x 60.4cm

Section 8

CT3326 Grass Cutter Attachment to fit CT3324 Cutting Width : 970 mm Cutting Height : 20 - 60 mm Net / Gross Weight : 30 / 32.7 kg Product Dimension : 97 x 52 x 58 cm

CT3327 Mower Attachment to fit CT3324 Disc Diameter : 404 mm Disc Speed : 3200 rpm Adjust Height : 0 - 50 mm Net/Gross Weight : 29.7 / 31.4 kg Product Dimension : 66.8 x 92 x 32 cm Carton Dimension : 94.5 x 69 x 33 cm

CT3328 Snow Pusher Attachment to fit CT3324 Multi-Functional Machine Shovel Speed : 1.5 - 3.7 Km/h Shovel Width : 850 mm Adjust Height : 0 - 50 mm Net / Gross Weight : 22.5 / 25.8 kg Product Dimension : 63.2 x 90 x 43.8 cm Carton Dimension : 91.5 x 45.5 x 19.2 cm

CT3329 Sweeper Attachment to fit CT3324 Multi-Functional Machine Rotary Cylindrical Diameter : 320 mm Ø Rotary Cylindrical Width : 900 mm Rotary Cylindrical Speed : 400 rpm Adjustable Height : 0 - 50 mm Steering Angle : ±25° Net / Gross Weight : 38.1 x 42.4 kg Product Dimension : 74.2 x 94.6 x 39.5 cm Carton Dimension : 97 x 52 x 38 cm

www.cannontools.co.uk


Section 8

Fertiliser & Seed Spreaders

CT2200

CT2201

38”

12’cu ft

Push Sweeper

CT2202

42”

12.9’cu ft

26" Wide 10" brush 10" rubber wheels.

CT2203

48”

14.6’cu ft

CT2215

Spreader

Lawn Sweepers

8' to 10' Spread with 12" wheel

10" Brush 10" Rubber wheels

CT2207

Capacity : 80lb Weight : 8kg Coverage : 14,200 Sq/ft Vinyl cover included. Heavy duty nylon gear.

CT2209

Spreader Folding handle.

Drop Spreader

10' to 12' Sread with 8.5" wheel Capacity : 60lb Weight : 5kg

CT2216

22” Spread with 12" wheel Capacity : 60lb Weight : 5kg 25 litre non-corrosive poly hopper.

Spreader 10' to 12' Spread with 12" wheel

Capacity : 125lb Weight : 12kg Coverage : 25,000 Sq/ft Vinyl cover included. Heavy duty aluminium gear.

CT2205 CT2204

Spreader 10' to12' Spread with 12" wheel Capacity : 80lb Weight : 10kg Folding handle. Rate setting control. Heavy duty Nylon gear. Filter screen.

Spreader 10' to12' Spread with 12" wheel Capacity : 50lb Weight : 11kg with hopper screen to break-up clumps of fertilzer. 3 Position Adjustable Handle.

CT2211 Spreader 10' to 12' Spread with 14.5" wheel Capacity : 175lb Weight : 21kg Coverage : 40,000 Sq/ft Rust-proof hopper and spreader plate

CT2208 CT2206 CT2213 Spreader Spreader 10' to12' Spread with 12" wheel Capacity : 100lb Weight : 12kg Folding handle. Rate setting control. Heavy duty Nylon gear. Filter screen.

NEILSEN

Distributed by Cannon Tools Limited

10' to 12' Spread with 14" wheel Capacity : 130lb Weight : 16.6kg Rate setting control. Aluminium gear.

Spreader 10’ to 12’ Spread with 14.5" wheel Capacity : 250lb Weight : 24kg Raised flow control handle accessable from ATV. Vinyl cover included.


Carts, Trailers & Spreaders

Section 8

CT2954

CT2210

CT2214

80lb ATV Spreader

Drop Spreader & Seeder - 100lb

Drop Spreader & Seeder - 175lb

32” Spread with 10" wheel

40” Spread with 10" wheel

CT2212

CT2217 Dump Cart 61" L x 36.5" W x 14" H with 12" wheels Capacity : 2000lb Weight : 85kg

175lb Drop Spreader 42” Spread with 14.5" wheel CT2921

CT2955 ATV Trailer - 700lb

Spreader - 350lb ATV Tow-behind Coverage : 7500 SQ.FT Pneumatic tyre : 14in. / 600-6 Steel square hopper Spreads Seed, Fertilizer, Sand. Adjustable tow bar with 2in. ball hitch. Heavy-duty cast iron oil batch gearbox. C.G.W.- 97KGS GN.W.- 71KGS

Ideal for Hay Bails

CT2957 Dump Cart - 50lb 650lb Dump Cart with Foot Pedal release mechanism for Easy Dumping. Heavy Duty Rustproof Poly Hopper with Comfortable T-Handle. Converts from a push cart to a tow cart by simply unfolding the hitch. 16” Pneumatic tyre G.W - 34.1kg N.W - 30.5k

CT2956 ATV Trailer Cart - 750lb General Purpose

www.cannontools.co.uk


Section 9

Assortment Boxes

CT1635

CT0449

CT4101

Self Drill Screws 120pc

Nails & Tacks 750pc

Screw & U-Type Cushion 170pc Sizes : 3, 4, 5, 6mm

CT4100

CT1634

CT0454

Sheet Metal Screws 175pc

Lock Nuts 100pc

Nuts & Bolts 110pc

CT1627

CT0740

CT1642

Nuts & Bolts 240pc

Self-tapping Screws, Nuts and Bolts 146pc

Wing Nuts 70pc

CT4098

CT1641

CT1633

Fastening Bolts 60pc

Anchor Bolts 40pc

Hair Pins 150pc

CT4099

CT1626

CT0459

Aluminium Rivets 400pc

Roll Pins 120pc

Cotter Pins 100pc

CT1631

CT1628

CT1630

Cotter Pins 500pc

Springs 150pc

E-Clips 300pc

Phillips / Slotted Head 3.0, 3.5, 4.0, 5.0 Zinc coated steel

6, 8, 10, 12mm Diameters 2.5, 3.5, 4.0mm holes 25 - 70mm Long

Aluminium with Steel Pin. Approx. Length : 37mm Sizes : 2.4, 3.2, 4.0, 4.8mm

NEILSEN

Distributed by Cannon Tools Limited


Assortment Boxes CT0450

CT1638

CT0741

Rubber 'O' Rings 60pc

Rubber 'O' Rings 225pc

Rubber 'O' Rings 144pc

CT0932

CT4096

CT0448

Rubber 'O' Rings 419pc

Rubber 'O' Rings 225pc Green

Washers 250pc

Section 9

Made for air conditioners etc. External Diameter : 3.0 - 22.0mm Internal Diameter : 1.0 - 4.0mm

CT4097

CT0742

CT1826

Rubber Washers Fibre Gaskets 141pc Common sizes

Washers 144pc

Plastic Washers 50pc

CT3162

CT4093

CT2922

Copper Seal Rings for Injectors 150pc

Copper Seal Rings for Oil Drain Plugs 150pc

Copper Washers 110pc

Tap / Faucet Washers in Rubber and Klingerith Fibre

10 - 24mm External Diameter 5.0 - 17.5mm Internal Diameter Depth : 1.0 - 2.0mm

1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 5/8”.

CT1629

CT1944

CT1637

Washers 720pc

Hose Clips 16pc

Hose Clamps 26pc

CT1632

CT0451

CT0456

Hooks & Eyes 80pc

Picture Hooks 50pc

Cup Hooks 45pc

www.cannontools.co.uk


Section 9

Assortment Boxes & Cable Ties

CT4102

CT1640

CT2415

Automotive Mini Fuses 120pc

Automotive Mini Fuses 80pc

CT0458

CT1639

CT0991

Automotive Fuses 50pc

Spade Terminals 76pc

CT2268

CT2923

CT2409

Butt Connectors 36pc

Heat Shrink Sleeves 127pc

Heat Shrink Sleeves 180pc

Heat Shrink Waterproof

Sizes : 2.0 x 40mm, 2.5 x 40mm, 3.5 x 40mm, 5.0 x 40mm, 7.0 x 80mm, 10.0 x 80mm, 13.0 x 85mm.

CT1636

CT4094

CT4103

Electrical Clips 24pc

Feather Keys - 60pc

Woodruff Keys 80pc

Automotive Fuses 24pc 20A, 30A, 40A, 50A, 60A, 70A, 80A, 100A Dimensions : 30 x 35 mm Contact distance : 8 mm

Parallel Key Assortment For form-fitting connection of hubs on shafts. Sizes : 3 - 12mm Deep 20 - 40mm Long.

Cable Ties CT3481

4.8 x 200mm / Black - 30pc

CT3475

4.8 x 200mm / Silver - 30pc

CT3478

4.8 x 200mm / White - 30pc

CT3482

4.8 x 300mm / Black - 16pc

CT3476

4.8 x 300mm / Silver - 16pc

CT3479

4.8 x 300mm / White - 16pc

CT3483

4.8 x 360mm / Black - 16pc

CT3477

4.8 x 360mm / Silver - 16pc

CT3480

4.8 x 360mm / White - 16pc

CT0864

7.5 x 375mm / Black - 100pc

CT0865

7.5 x 375mm / White - 100pc

NEILSEN

Distributed by Cannon Tools Limited

CT1623 Cable Ties 500pc Tub

Cable Connectors 100pc

5.0 x 13 mm, 6.5 x 16 mm 5.0 x 13 mm, 6.5 x 16 mm 7.5 x 19 mm, 7.5 x 19 mm 9.0 x 22 mm, 9.0 x 22 mm

Insulation Tape 10 Rolls in a pack CT2918 CT2919 CT3671 CT3672 CT3673 CT3674

Black Mixed Red White Yellow Green


Assortment Boxes & Tape

Section 9

CT4108

CT4113

CT4118

Honda Trim Clip Assortment 418pc

VW Trim Clip Assortment 255pc

Fiat Trim Clip Assortment 308pc

CT4109

CT4114

CT4119

Nissan Trim Clip Assortment 408pc

Audi Trim Clip Assortment 160pc

CT4110

CT4115

CT4095

Ford Trim Clip Assortment 415pc

Renault Trim Clip Assortment 300pc

Grease Nipples 70pc 9 popular sizes -

CT4111

CT4116

CT2227

BMW Trim Clip Assortment 290pc

GM Trim Clip Assortment 300pc

Linch Pins 50pc

CT4112

CT4117

Mercedes Trim Clip Assortment 270pc

Peugeot Trim Clip Assortment 345pc

AutomotiveTrim Clip Assortment Boxes

Volvo Trim Clip Assortment 350pc

1/8”, 1/4”, M6, M8, M10 Straight / 45 and 90 degree Chrome plated

With a selection of Trim Clips, Grommets, Screws, Rivets and Retainers for all the most popular makes and models of vehicles. See Website for full details of contents.

CT2122

CT2123

CT2124

Hazard Warning Tape Red / White

Hazard Warning Tape Yellow / Black

2” / 50mm Wide x 50m long x 0.07mm

2” / 50mm Wide x 50m long x 0.07mm

5 Rolls of PVC Electrical Tape

www.cannontools.co.uk


Section 9

Padlocks

CT0001

CT0372

50mm

CT2444

35mm

73mm Padlock & Hasp

CT0373

70mm

CT2445

40mm

with 3 Keys

CT0374

90mm

Combination Padlocks

Disc Padlocks

CT3871 Combination Padlock 4 Digit Code

CT2797 Lock Cylinder

CT1139

for CT0001

2 Laminate Padlocks 50mm

CT3868

50mm

CT3867

70mm

Brass Padlocks Electroplated

CT3866

90mm

CT2084

20mm

Sliding Bolt Padlocks

CT2085

25mm

CT2086

32mm

CT2087

38mm

CT2088

50mm

CT2089

63mm

CT2090

75mm

CT2091

38mm*

CT2092

50mm*

*

20mm

CT0252

25mm

CT0253

30mm

CT0254

40mm

CT0255

50mm

CT0256

60mm

CT0257

40mm*

CT0258

50mm*

40mm

CT2363

50mm

CT2364

60mm

Top security Padlocks

Anti hacksaw sliding bolt with Steel body. Supplied with 3 keys

CT3870 65mm Padlock with Alarm

CT2259 40mm Heavy Duty Padlock

Padlocks Chrome Plated

CT0251

CT2362

Water Resistant Padlock with 2 Keys.

CT0274

Can be used with alarm active or inactive. Alarm activated when moved or knocked. Supplied with 3 keys and replacement batteries.

CT3114 65mm Padlock Brass Mechanism. Removeable shackle. Ideal for locking bars with 3 Keys

CT3068

Rhombic Padlocks with plastic cover. Anti-saw steel shackle Anti-pick precision pin tumbler with domino key mechanism. Supplied with 3 keys.

NEILSEN

*

Heavy Duty Padlocks - 4pc set 40mm with 2 Keys per Padlock. All 8 keys supplied will fit each padlock. Heavy duty steel shackle with Brass cylinder. Water Resistant with weather proof coating. Ideal for securing sheds / garages and lock-ups etc.

Distributed by Cannon Tools Limited

4pc 20mm Hi-Vis Brass Padlock Set Chrome plated shackle with 2 spare keys


Padlocks, Chain & Rope

Section 9

CT1065

40mm

CT1523

90 x 32mm

CT2497

2 x 5mm

‘D’ Shackles

CT1066

50mm

CT1524

90 x 38mm

CT2498

2 x 6mm

2pc sets 1pc 8 / 10 / 12mm

Padlock & Chain

CT1525

115 x 38mm

CT2499

8mm

with 8mm x 1M PVC coated Chain

CT1526

170 x 50mm

CT2500

10mm

CT2501

10mm

Hasp & Staples Heavy Duty

CT1063

65mm

1M

CT1064

65mm

1.8M

Padlock & Chain with 10mm Chain fabric coating

CT2446 Cable Lock 6mm x 1m

CT1838

100mm

CT2492

2 x 5mm

Bow Shackles

CT1839

150mm

CT2493

2 x 6mm

CT1840

200mm

2pc sets 1pc 8 / 10 / 12mm

CT2494

8mm

CT2495

10mm

CT2496

10mm

Pad Bolts

CT2502

CT1136

Galvanised Ring Bolt

Rope - 1/4" x 50' Neopropolene

CT1391 CT3315

3 Snap Hooks - 5/16” Aluminum

Rope - 1/4" x 100' Multi-purpose

CT2447 Cable Lock 8mm x 1m

CT1827

4mm

CT1828

6mm

CT1829

8mm

CT3316 Rope - 3/8" x 100' Multi-purpose

Snap Hooks 2pc Sets

CT2473 Cable Lock 12mm x 1.2m

CT2485

2 x 4mm

Quick Links

CT2486

2 x 5mm

2pc sets 1pc 10 / 12mm

CT2487

2 x 6mm

CT3317

CT2488

2 x 7mm

CT2489

2 x 8mm

Rope - 1/2" x 100' Multi-purpose

CT2490

10mm

CT2491

12mm

www.cannontools.co.uk


Section 9

Bungees & Ratchet Ties

CT0384

CT0510

CT1009

Ratchet Tie Down Strap

Ratchet Tie Down Strap

1" x 15'

2" x 25'

Ratchet Tie Down Strap 5 Ton 10M Cargo Lash

CT2890 Ratchet Tie Down Strap 2 inch x 5ft for Tyres

CT3804

CT1008

Truck Strap

Tie Down Strap Set

NOT for Lifting

250kgs Cargo Lash

50mm x 9.5M -5000kg breaking strain / EN12195-2

CT0520

CT0518

Bungee Cord 52" x 12mm Heavy Duty

CT0519

Bungee Cord

Bungee Cord

24" x 10mm Heavy Duty

40" x 10mm Heavy Duty

CT3137 2 Bungee Cords 36” / 900 x 12mm

CT3136

CT3135 2 Bungee Cords 24” / 600 x 12mm

CT3138

2 Bungee Cords 30” / 750 x 12mm

2 Bungee Cords 48” / 1200 x 12mm

CT3851

CT3139

CT3179 2 Bungee Cords 72” / 1800 x 12mm With Metal Hooks and Rubber Stops. Ideal for use on most vehicles.

10pc 5 x 100mm Bungee Cord Pack CT3181

10” / 250mm with Steel Hooks for light duty applications.

CT4201

CT3180

Belt Clip Tool Holder System

10pc 5 x 150mm Bungee Cord Pack

NEILSEN

10 Mini Bungee Cords

Distributed by Cannon Tools Limited

10pc 5 x 200mm Bungee Cord Pack

Plastic Belt Clip with Bungee Ball Retainer. With 3 Ball Bungee Cords strong enough to hold hand and power tools.


Section 9

Dust Shets, Tarpaulins & Sack Trucks CT2468

CT0987

CT2469

CT2467

Eyelet pliers with 100 eyelets

20 Eyelets - 20mm

Tarpaulin Eylet Repair Set Tarpaulins

CT2005 Dust Sheets

CT1049

4’ x 6’

CT1050

6’ x 9’

CT1051

8’ x 12’

CT0791

CT1052

12’ x 18’

Stair Runner 3.6M x 0.9M

CT1053

18’ x 24’

CT1610

20’ x 40’

10' x 8' Cotton Twill

CT0051 Sack Truck Cap : 600lb 250 x 90mm Pneumatic Tyres

200 Eyelets - 12mm

CT1126

CT1835

Folding Aluminium Trolley

Castor Wheel

Castor Wheel

50 x 17mm Swivel / 25Kg

50 x 17mm Swivel with brake / 25Kg

CT1830

CT1831

80kg Lightweight aluminium frame with Sponge grip.

CT1836

Castor Wheel

Castor Wheel

100mm Swivel

120mm Swivel

CT1834

CT1833

4 Castor Wheels

4 Castor Wheels

32mm Swivel / 15Kg

40mm 2 Fixed / 2 Swivel / 20Kg

CT3747

CT3456

Spare Wheel

Spare Wheel Sack Truck

CT4187

3 in 1 Multi-purpose Sack Truck also Supported Truck and Mobile Platform Max load capacity : 250 / 300kg Fitted with 10 inch pneumatic tyres Extendable loading platform Overall Size: 1275L x 614W x 360mmD

CT1802

CT1832

Spare Wheel Sack Truck

Castor Wheel

14” / 360mm PU Foam Not for use on the highway

160mm Max Weight 150kg

www.cannontools.co.uk


Section 9

Ladders & Platforms

CT3869

CT3928

CT3929

Ladder Roof Rack Clamp Easy way to secure ladders with a universal fitment for roof racks. Supplied with two heavy duty padlocks.

CT1047 12.5ft Telescopic Aluminium Ladder

Ladder Stand-Off Roof Hook Kit

Aluminium tand-off improves stability and fits to any ladder. The V Type design can be used on flat surfaces corners or over down pipes. Fitted with rubber feet to prevent slipping

Turns any ladder into a roof ladder. Secures ladder to the apex of the roof. Aluminium frame and plastic wheels. Pack contains Roof Hook only. Simple to fit on a ladder.

CT1106 Step Ladder with tray

CT1959 1.4M Compact Step Ladder

NEILSEN

Distributed by Cannon Tools Limited


Section 9

Ladders & Platforms CT3294

CT1957

Multi-functional ladder 11 Steps - 310mm Wide. Size : 1505 x 577 x 156mm Closed. Size : 1946 x 577 x 886mm Open. Plywood Platform Section. Max Load : 150kg

2.7M Telescopic Ladder Ideal for getting round obstacles. 310mm between rungs. Compact for storage.

CT1958

Multi-Function Ladder

CT1105

Ladder - 3.38M Step Ladder - 1.66M Scaffolding - 905mm

Aluminium Folding Work Platform Load Capacity : 250lb

www.cannontools.co.uk


Section 10 Hobby Craft CT2818

CT0702

CT2457

Mini Drill / Rotary Tool 230V / 130W / 50Hz Speed : 1000-3200rpm Jaw Size : 3.2mm Variable Speed Dial

Magnifying Glass Reading Magnifying Glass

CT2354 150pc Rotary Tool Accessory Kit

CT1670

Engraver 230V / 13W / 50Hz Variable Speed Control Includes Engraving Bit and 2 Stencils

Cuts Grinds Sands Drills Sharpens and Polishes. Works on Metal, Wood, Ceramic, Glass, Plastic. 2.25mm, 3/32 inch and 3mm, 1/8 inch Shanks.

2pc Magnifying Glass Set 60mm Diameter

CT0557 CT2802 Compass Cutter

CT3072

3â&#x20AC;? / 75mm Radius. For small craft projects.

13pc Hobby Knife Set

Engraver 2 x AA Batteries.

Includes 3 Aluminium Handles 10 Assorted Blades with different uses.

More Kives on Page 224 CT3305

CT3155

Glue Gun 230V / 10W

Cutting Mats CT3901

A4 30 x 22cm

CT3902

A3 45 x 30cm

CT3903

A2 60 x 45cm

CT3992

A1 90 x 60cm

with 2 Glue Sticks

Mini Hand Drill with Adjustable Chuck Plastic hand drill used for wire twisting and drilling

CT3070 CT0845

15 Glue Sticks

95mm Archimedes Drill A small brass finish spiral type hand drill. Operates simply by pushing down on mechanism fitted with a return spring. Ideal for small drill bits 0-1mm

CT1132

7.5mm x 100mm High Quality Transparent Glue Sticks

10â&#x20AC;? Scissors

CT3069

250mm Professional Wallpaper Scissors

CT0232 CT3701

2pc Pin Vice Set 90mm long Accurate collets. Ideal tool for holding small jobs

Glue Gun - 230V / 40W with 2 Glue Sticks CT0480

CT3071 10 Glue Sticks

4pc Pin Vice Set Accurate collets. Ideal tool for holding small jobs

NEILSEN

Distributed by Cannon Tools Limited

11.2 x 100mm High Quality Transparent Glue Sticks

Tailoring Scissors 10 Inch / 250mm Tailoring Scissors Stainless Steel Blades with Aluminium Alloy Handles


Hobby Craft & Stapling Section 10 CT1609

CT0859

CT3311 15pc Brush Set Flat and Round Heads

3-in-1 Staple Gun Sturdy Steel Gun with Impact Pressure Adjustment Lock. Suitable for 4 -14mm Staples, 10 - 12mm U-Staples, 10 - 14mm Nails. Supplied with - 200 x 12mm U Staples. 200 x 12mm 10mm Nails. 200 x 12mm 8mm Staples

Air Brush Kit Ideal hobbyist kit Spray pattern 3 - 50mm. 15 - 50psi 1.03 - 3.5bar Air Brush. 1.5M Air line. 21ml and 57ml Jar. Standard propellant regulator valve. Connector 1/4 inch F x 1/8 inch M

CT2824

CT0325 Staple Gun 6 - 14mm

CT3312 9pc Brush Set Flat Heads

5pc Oil Painting Palette Knife Set For use with oil based and acrylic paints. Flexible knives with wooden handle

CT3156 supplied with 800 Staples 400 x 6mm 400 x 8mm for DIY household, gardening and workshop use.

CT0544

CT0320

Assorted Brush Head Sizes

6pc Dental Tool Set Stainless Steal

12pc Art Brush Set Staples - 1250pc 8mm Square 12mm U-staples 10mm Nails

CT3157 CT0321 Staples - 1250pc 8mm Deep 10.6mm Wide

CT3314 12pc Brush Set Round Heads

CT0322

Ideal for Sculpture Work with Clay, Ceramics, Wax and other soft materials.

Staples - 1250pc 10mm Deep 10.6mm Wide

6pc Wax Carving Set Stainless Steel

CT3313

CT1738

12pc Brush Set Flat Heads CT0323 Staples - 1250pc 12mm Deep 10.6mm Wide

12pc Wax Carving Set Stainless Steel

www.cannontools.co.uk


Section 10 House, Home & Office CT3825

CT3826

CT3828

230V Convector Heater 3 power settings : 750 / 1250 / 2000W Adjustable thermostat control. Safety thermal cut-out, Over heating protection. Small size freestanding or wall mountable.

230V Halogen Heater 1200W Oscillating Halogen Heater with Special processed Halogen tubes. 3 power settings : 400W / 800W / 1200W. Refined streamline design with Automatic tip-over and over heating protection.

CT3827

230V Fan Heater Compact Upright Fan Heater - 1000W / 2000W Carry handle. Adjustable Thermostat. Select Cool, Warm, Hot modes. Over heating protection.

CT3829

CT2143 230V Fan Heater 230V Convector Heater 3 power settings : 750 / 1250 / 2000W With Turbo and Timer controls Safety thermal cut-out, Over heating protection. Small size freestanding or wall mountable.

Compact Fan Heater - 1000W / 2000W Carry handle. Adjustable Thermostat. Select Cool, Warm, Hot modes. Over heating protection.

CT3442

CT0789 230V / 3.0Kw Electric Heater Output - 510M cubed per hour 3 Settings - 40W / 1500W / 3000W

CT0709

230V Spray Gun Electric Paint Sprayer Steam Wallpaper Stripper 230V / 2200W. 5 litres Capacity Approx. 90 Minutes of use Hose Length 3.65M

Rated Power - 800W Capacity - 1000ml Max Viscosity Capacity - 60din/sec Flexi-Hose - 1.5M Nozzle - 1.0mm Diameter

CT4141 CT3098

Vacuum Cleaner Vacuum Cleaner - Wet and Dry 230V / 1250W / 50Hz Capacity : 20 litres . Vacuity : 14kpa Net weight - 6.4kg. Measurement : 355 x 355 x 510mm

NEILSEN

Distributed by Cannon Tools Limited

230V / 800W / 50Hz Capacity : 18L Ideal for cleaning vehicle interiors and cold ash from wood burners / fireplaces and BBQs.

Hot Air Gun with 4 Nozzles 230V / 2000W / 50Hz Temperature 300°C / 600°C Air Flow - 300L/m to 600L/m Useful for for a variety of decorating applications


House, Home & Office Section 10 CT2503

CT2342

CT2606

12 Shelf Brackets

Mouse Mat

3” x 4”- White

with Gel Wrist Support Ask about Mouse Mats with your company logo or brand.

Letter Box

CT0415 CT0841 CT2504 12 Shelf Brackets 5” x 6”- White

360° Rotary Platform Manual rotating stand. Ideal for computer monitors. Approx 250mm Diameter.

Boot Scraper Steel Matt CT3101

CT0382 CT2505 12 Shelf Brackets 7” x 9”- White

Boot or Shoe Brush 8pc Storage Hook Set

Complete with mounting brackets. Stiff bristles for effective removal of mud and dirt.

CT0390

CT1845 230V Insect killer Outdoor Use Only Frequency 60Hz 36W UV Lamp 1.2M Lead

CT2506 12 Shelf Brackets 10” x 12”- White

Brush Bracket Clamp / Bracket for brush handles. Galvanised Steel.

CT1854 CT4104

Brush Bracket - Black Spare Bracket for brush stay. Black painted 400mm long.

CT3854 CT2764

5pc Tool Hook Set Ideal for hanging garden tools ie Forks, Shovels, Spades and Brooms Zinc Plated. Includes fixing screws

Air Revitaliser The Clever Mouse Trap Rocking and Locking action traps mouse humanely. Easy to use - No Mess / No Fuss. Safe for children and pets

Voltage : 230V / 50Hz / 13W Coverage : 200Sq.M With 4 Blue LEDs 1.2M Lead with BS Plug Used in conjunction with Water Soluble Aroma and Spa Solutions ( Not supplied ). Helps to kill harmful environmental bacteria and remove Odours and Smoke from rooms.

www.cannontools.co.uk


Section 10 Outdoor Events & Travel Gear CT1692

CT2344

CT2343

Recoil Key Ring Cord

36 Clothes Pegs

36 Jumbo Clothes Pegs

CT1734

CT3432

650mm

CT1843

S" Hook - 5mm

Car Wash Mitten Size : 220 x 170mm Chenille â&#x20AC;&#x2DC;noodleâ&#x20AC;&#x2122; for car wash. Towelling micro fibre for polishing.

CT1735 S" Hook - 6mm

CT3433 12V Travel Kettle or Coffee Pot Capacity : 0.5 litre Supplied with 2 Mugs and 12V Automotive Plug

CT1736

Car Wash Sponge

Tent Peg - 5mm

Size : 220 x 90mm With elastic hand strap.

CT3341 CT3238 CT1737 Travel Mug

Micro Fibre Towels

Tent Peg - 6mm

Ultra fine fibres to hold and lift dirt and grease from many surfaces.

CT3438

CT3443

Stainless Steel Vacuum Mug for Hot or Cold liquids

CT3275

Portable Gas Stove Butane Gas Cartridge with Automatic Ignition. Normal heat input 2.5kw / 155g/h x 2. Product size 662 x 280 x 128mm. Safety Features - Double sealed valve. Overpressure protection. Incorrect cartridge placement prevention

Picnic Chair Folding Robust Chair for Outdoor use.

CT1284

CT3274

Picnic Table 4ft Sturdy Folding Utility Table Max. Capacity - 200lbs L 1220mm x W 610mm x H 760mm High Impact Polypropylene

NEILSEN

BBQ Plate to fit Portable Stove CT3438.

Distributed by Cannon Tools Limited

Picnic Table Folding Robust Table for Outdoor use. Size : 1840 x 760 approx. when assembled. Folds flat for easy storage and transporting.


Outdoor Events Section 10 CT4105

CT3743 Gazebo / Marquee Awning

White Event Awning - 10 x 10ft Waterproof Polyethylene White Powder Coated Steel Frame PP joint fittings Size : L10ft x W10ft x H8ft

Petrol Fan for Bouncy Castles Inflatables and Novelty Displays Power : 5.5 Hp peed : 3600rpm Max. Flow : 2700 cubic metres per hour Max. Pressure : 2500pa Outlet Diameter : 210mm

CT4106 Marquee White Event Marquee - 20 x 10ft Waterproof Polyethylene White Powder Coated Steel Frame PP joint fittings Size : L20ft x W10ft x H8ft

CT3743-1 Spare Blower Cover for CT3743

CT3743-2 Spare Blower Fan for CT3743 CT4107

Marquee

White Event Marquee - 30 x 10ft Waterproof Polyethylene White Powder Coated Steel Frame PP joint fittings Size : L30ft x W10ft x H8ft

CT4000

Bouncy Castle Inflator / Blower 230V Fan Blower - 1.5Hp Bouncy Castle Inflator Voltage : 220-230V / 50Hz Power : 1100W / 1.5Hp Current / Max : 6.9A Speed : 2800rpm Volume / Max : 1784 m?/h Pressure / Max : 1750Pa Insulation class : IP55

www.cannontools.co.uk


Section 10 Leisure - Horse & Stable CT3543

CT0059

CT2767

Animal Clippers Pet Clippers

Sheep Shears

230V / 50Hz / 30W With Imterchangeable Heads. Heavy Duty Blade. Stable and Qiiet Operation. Easy Change Quick Release.

230V / 50Hz / 300W / 2500rpm 6m power cord with thermal overload reset button. Contents. Cutter, Screwdriver, Oil and Brush.

230V / 50Hz / 300W / 3000rpm Contents - Blade, Blade Guard, Clipper Grease, Blade Oil, and Cleaning Brush. Hi-speed cuts through thick, thin, coarse, wet, damp and dry hair. Perfect for tapering, texturing and all round styling.

CT3993

CT2769

CT2768

Spare Blades

Spare Blades

for Animal Clippers CT2767

2 Sizes : 9 and 10 for Pet Clippers CT3543

for Sheep Shears CT0059

Spare Blades

CT3284 CT3039 Spare Blades for Animal Clippers CT2767

Rubber Stable Matting Size - 183cm x 123cm x 1cm Weight - 29-32kg Excellent quality non-porous moulded rubber. Providing an excellent insulation from the cold. High grip studded top pattern and Drainage grooves to the underside Good support for animal legs and hoofs.

CT3708

CT2353

2pc Horse Hoof Nipper & File Set

Horse Hoof File

CT3656

12V Cordless Horse Clippers 2 x 10.8V Li-ion batteries with Charger. Cooling system for quiet continuous working. Perfect for all round styling and barbering. With Screwdriver / Clean Brush and Blade Oil.

14" / 350mm Blade

CT3734

Sold in sets of 3 CT0699 CT3143

Animal Feed Bucket 30 litre Rubber Bucket with Hook for stable doors

NEILSEN

Distributed by Cannon Tools Limited

54cm Diameter Capacity : 66 litres Height : 40cm Weight : 2.35kg

Animal Feed Trough 50 Litre Animal Trough Livestock feed or water trough. Tough and impact resistant with integral moulded hooks.


Leisure - Bikes & Spares Section 10

CT3404 Digital Breath Alcohol Tester A simple method to analysis Blood Alcohol with advanced semiconductor oxide alcohol sensor. Range : 0.00-0.19% BAC / 0-1.9g/l. Accuracy : 0.01% BAC / 0.1g/l Requires 2 x AAA alkaline batteries

Mad Munk and Kepspeed are the brands we supply through our European

CT3405

distribution centre in Belgium, stocking bikes, bike spares and upgrades,

50 Mouthpieces

plus Neilsen tools and equipment, to see the complete range -

for Breath Tester CT3404 above.

please log onto the website @ www.cannoneurope.com or www.madmunk.com CT2812

CT2815 Battery and Charger

Black Bicycle with Electric Motor

10Ah Li-ion Battery Charge 4 - 6 hrs For Electric Bicycle

CT2813

Red Bicycle with Electric Motor

A1 Alloy Frame. 26â&#x20AC;?. Wheels / 1.95â&#x20AC;? Tyres. Shimano Disc Brakes. Gears - Derailleur 6 Speed. Front and Rear Lights. Gel Saddle. 120kg Load Capacity. 250W High Speed Brushless Hub Motor. Pedal Assist System. 36V 10Ah Li-ion Battery. Charge 4 - 6 hrs. Max Speed - 25Km. Range - 55-60Km. Weight - 28/31kgs. Size - 1550 x 280 x 700mm

www.cannontools.co.uk


NEILSEN

Distributed by Cannon Tools Limited


• Precision Screwdrivers • Electrical Screwdrivers • Pound Thru’ Screwdrivers • Power Bits and Bit Holders • Impact Drivers • Hex, Spline, Star Keys and Bits •Plus Socket Bits and accessories in 1/4”, 3/8, 1/2 “ and 3/4” Drive

• 1/4" Dr Sockets & Accessories • 3/8" Dr Sockets & Accessories • 1/2" Dr Sockets & Accessories • 3/4" Dr Sockets & Accessories • 1" Dr Sockets & Accessories • Special Application Sockets

Section 1

SCREWDRIVERS PLUS

Section 2

SOCKETS & ACCESSORIES • Adjustable • Combination • Ratchet • Ring • Socket Wrenches • Special Applications

Section 3 SPANNERS

• Combination / Long Nose • Wire Cutters and Crimpers • Electrical • Waterpump • Riveting • Grip Wrenches or Locking Pliers • Special Application Pliers

Section 4 PLIERS

• Battery / Ignition Tools • Automotive Circuit Testing • Exhaust and Emission Tools • Chisels, Files and Punches• Radiator and Fluids • Timing Tools • Brakes and Transmission Tools • Re-Threading, Taps and Dies • Special Application Tools & Equipment • Jacks and Winches • Tin Snips and Bolt Croppers • Air Impact Wrenches • Air Ratchets • Air Tools and Fittings • Circuit Testing • Soldering • Fuses and Connectors • Inspection Lamps and Torches • Cordless Tools • Power Tools • Power Tool Accessories • Generators / Power Converters • Drills • Brushes and Burrs • Cutting, Grinding and Sanding Discs

• Hammers, Chisels and Wrecking Bars • Knives and Scrapers • Measuring and Weighing • Clamps & Vices • Planes • Saws • Spirit Levels and Tape Measures • Scrapers and Trowels • Plumbing - Pipe Bending and Tile Cutting • Compactors and Rammers • Workwear - Gloves, Knee Pads, Safety Gear, Aprons and Tool Belts • Water Hose and Pressure Washers • Picks / Shovels / Spades / Forks • Trowels / Rakes and Hoes • Hedge Cutters and Pruning • Picks and Axes • Sprayers

Section 5 AUTOMOTIVE

Section 6 ELECTRICAL

Section 7 CONSTRUCTION

Section 8 GARDENING

• Assortment Boxes • Tool Bags & Boxes • Padlocks and Bolts • Ladders • Rope, Straps and Snap Hooks • Tarpaulins and Dust Sheets • Sack Trucks

Section 9 HARDWARE

• Leisure • Hobby Craft • Outdoor Events • Household & Travel Gadgets • Animal, Horse & Stable

Section 10 HOME & LEISURE

New Products available on the website www.cannontools.co.uk


Distributed by Cannon Tools Limited

STOCKIST

CANNON TOOLS LIMITED T +44 (0) 121 561 6760 | F +44 (0) 121 561 6761 E : sales@cannontools.co.uk | W : www.cannontools.co.uk 20 Station Road, Rowley Regis, West Midlands, B65 0JU, United Kingdom

Neilsen catalogue  

Hand Tools and Equipment

Advertisement