Issuu on Google+

2011/2012 pure

led


Introduction

Eulum Design was established in 2002 and then

What makes Eulum Design Special?

What are the standards for LEDs?

Because we design and manufacture the current control

At this time, there are no unified standards for the

incorporated in 2005 with the sole intention to design,

very inefficient as they are designed to operate over a wide

circuitry in our luminaires and light engines, we have

manufacturing of LEDs and debate is ongoing as to the

manufacture & supply the highest quality and the most

range of LED configurations. The datasheets for these

the ability to decrease the drive current in response to

proper ways to test them for brightness, color quality, and

innovative luminaires at the most competitive prices. Today

devices often will show an efficiency specification at the

inevitable industry improvements to the efficiencies of

lifetime. At Eulum Design we test all of our luminaires and

we are one of the leading manufacturers of low energy LED

best possible operating condition, while the efficiency for

the LEDs. This allows us to easily maintain constant

LED light engines to ANSI (American National Standards

Lighting products and components, supplying bespoke

your particular LED configuration could be below 70%.

brightness levels within a product line from year to

Institute) standard LM79. This standard defines the latest

systems all over the world.

Eulum Design optimizes each on-board driver for the LED

year. If a luminaire is damaged or our client expands

industry-approved guidelines to test the true output of the

load it is designed to drive, often reaching efficiencies as

their space and additional luminaires are required, we

luminaire both in total circuit efficacy and lumen output by

high as 97%.

can provide new luminaires that produce the same light

an independent laboratory.

Our unique approach to drive circuitry and the thermal

Off the shelf constant current power supplies can be

Future Proofing

control of the diode, enables Eulum Design to offer the most efficient LED modules that will ensure optimum performance throughout their life cycle. Eulum Design’s innovative dimming control devices will allow our customers total flexibility along with full integration into existing installations previously designed for tungsten or fluorescent luminaries. UK & USA Design and Manufacturing Highest quality components Highly experienced professionals

output as the ones installed previously. Our on-board current control circuitry is designed to operate from a standard 24VDC supply that allows simple and efficient power distribution using thousands of readily available power supplies from hundreds of suppliers across the world. The on-board driver allows our designs to directly monitor the temperature of the LEDs, and make adjustments to the current control to ensure a long lifetime, even under fault conditions such as an undersized heatsink.

All Eulum Design luminaires comply fully to EN60598-1 and are tested to ANSI LM79. Eulum Design is an ISO9001 registered firm. Eulum Design takes it’s ecological responsibilities seriously and as such we: Lead free solder in compliance with RoHS requirements All Aluminium used has a minimum 20% recycled element All packaging is recyclable No harmful solvents are used and where possible the use of solvents is avoided

EU-D46/1-M80

EU-45x42/3-M80

EU-D216/96L

EU-483x20/84 | EU-483x20/42

Ø46mm LED Module

45x42mm LED Module

254x203mm LED Module

483x20mm LED Module

Designed for ease of installation the EU-D46/1-M80 is the ultimate 1,000lm single point source LED engine, with the most advanced features:

Designed for ease of installation the EU-45x42/3-M80 is the ultimate 3,000lm LED engine, with the most advanced features:

Designed for ease of installation the EU-D216/96L is the ultimate retrofit LED engine, with the most advanced features:

Designed for ease of installation the EU-483x20 range of linear LED boards, with thermal transfer tape applied for maximum thermal transfer.

• 24vDC constant voltage input.

• 0-10v Dimming input direct on-board

• 0-10v Dimming input direct on-board

• Thermal protection of the diode via feed back circuit which will reduce the current by 1% for each 1°C increase over 70°C measured on the substrate so as to ensure the life of the LED.

• Thermal protection of the diode via feed back circuit which will reduce the current by 1% for each 1°C increase over 70°C measured on the substrate so as to ensure the life of the LED. • Aluminium dielectric substrate to provide better ‘heat spreading’ with superior thermal resistance to standard aluminium PCB’s. • A die-cut thermal transfer material is available to create optimum thermal transfer from the LED module to the heat sink. • Secondary optics available for 15° and 30° beam angles. • Independently tested to ANSI LM79 • Replacement for 26w TCDE & 20w HIT

• Aluminium dielectric substrate to provide better ‘heat spreading’ with superior thermal resistance to standard aluminium PCB’s. • A die-cut thermal transfer material is available to create optimum thermal transfer from the LED module to the heat sink. • Independently tested to ANSI LM79 •Replacement for 2x26w TCDE & 35w HIT

• 90-230vAC input. •T  riac Dimming or 0-10v Dimming options •R  emote 90min or 3hr Emergency kit available •4  layer FR4 substrate with heat spreaders on top and bottom • I solating base in white PC and transparent PC cover (optional) • Uniformly even lit appearance • Independently tested to ANSI LM79 •R  eplacement for 28w TCDDE & 26w TCDE

• Independently tested to ANSI LM79 • Replacement for T5 fluorescent lamps

3


Koya-S1|P1 LED

Koya-R2 LED

5

Koya-S1|P1 Surface & Pendant mounted LED luminaire

D

H

Lamps

Suitable for wall or ceiling mounting

Luminaire Efficacy lm/w

CRI

Code

Code

Koya-R2 Plaster-In recessed mounted LED luminaire Suitable for trimless installation in plasterboard ceilings 8-16 mm

Pendant length 1500mm

Koya-S1

silver

white

Luminaire body made of white or silver/grey coated extruded aluminium Diffuser from Opal Acryl-Satiné

300

75

14w LED

49

80+

KS1OSIG-1-R01-WW

KS1OWIG-1-R01-WW

Luminaire body made of white coated or anodised extruded aluminium Diffuser from Opal Acryl-Satiné

300

75

14w LED

55

80+

KS1OSIG-1-R01-NW

KS1OWIG-1-R01-NW

90-230vAC Input with Triac dimming

90-230vAC Input with Triac dimming

Koya-P1

silver

white

300

75

14w LED

49

80+

KP1OSIG-1-R01-WW

KP1OWIG-1-R01-WW

300

75

14w LED

55

80+

KP1OSIG-1-R01-NW

KP1OWIG-1-R01-NW

Luminaire Efficacy lm/w

CRI

Code

14w LED

49

80+

KR2OWIG-1-R01-WW

14w LED

55

80+

KR2OWIG-1-R01-NW

D1

D2

Lamps

300

316

300

316

white

60

max 1500

H

30

75

EVG 100

max 20mm

min 10mm

D1 D2

D2

D

D


Koya-O1|P2 LED

Iza-S2|P2 LED

7

Koya-O1|P2 Surface & Pendant mounted LED luminaire Suitable for wall or ceiling mounting

D

H

Lamps

Luminaire Efficacy lm/w

CRI

Code

Iza-S2|P2 Surface & Pendant mounted LED luminaire

L

H

Lamps

Suitable for wall or ceiling mounting

Luminaire Efficacy lm/w

CRI

Code

Pendant length 1500mm Diffuser from Opal Acryl-Satiné with silver/grey coated ‘contrast’ fixing ring

Koya-O1 75

14w LED

49

80+

KO1OSIG-1-R01-WW

Pendant length 1500mm Luminaire body made of white oe silver/grey coated extruded aluminium

Iza-S2

400

300

75

14w LED

49

80+

IS2OEIG-1-R01-WW

90-230vAC Input with Triac dimming

400

75

14w LED

58

80+

KO1OSIG-1-R01-NW

Diffuser from Opal Acryl-Satiné

300

75

14w LED

55

80+

IS2OEIG-1-R01-NW

silver

90-230vAC Input with Triac dimming

Iza-P2 300

75

14w LED

49

80+

IP2OEIG-1-R01-WW

300

75

14w LED

55

80+

IP2OEIG-1-R01-NW

silver

Koya-P2 400

75

14w LED

49

80+

KP2OSIG-1-R01-WW

400

75

14w LED

58

80+

KP2OSIG-1-R01-NW

silver

silver

L2

60

min 70

max 1500

max 1500

75

75

H

L1

L

5,5

D

D

H

L

L1


Iza-R2 LED

Iza-O1 LED

9

Luminaire body made of white or silver/grey coated extruded aluminium Diffuser from Opal Acryl-Satiné 90-230vAC Input with Triac dimming

A

C1

C2

Lamps

Luminaire Efficacy lm/w

CRI

Code

Iza-O1 Surface mounted LED luminaire

Luminaire Efficacy lm/w

CRI

14w LED

49

80+

IO1OSIG-1-R01-WW

14w LED

58

80+

IO1OSIG-1-R01-NW

L

H

Lamps

300

75

300

75

Suitable for wall or ceiling mounting silver

340

365

344

14w LED

49

80+

IR2OEIG-1-R01-WW

340

365

344

14w LED

55

80+

IR2OEIG-1-R01-NW

Diffuser from Opal Acryl-Satiné with silver/grey coated ‘contrast’ strap 90-230vAC Input with Triac dimming

EVG

A C1 30 max 35mm

min 10mm

Code

silver

107

Iza-R2 Plaster-In recessed mounted LED luminaire Suitable for trimless installation in plasterboard ceilings 8-16 mm

C2

L

C1 × C2

H

L


Utsu-S2 LED

Utsu-R2|R3 LED

11

90-230vAC Input with Triac dimming

H

Lamps

Luminaire Efficacy lm/w

CRI

Code

Code

Utsu-R2|R3 Plaster-In recessed mounted LED luminaire

A

H

Lamps

Suitable for trimless installation in plasterboard ceilings 8-16 mm silver

white

300

75

14w LED

49

80+

US2OSIG-1-R01-WW

US2OWIG-1-R01-WW

300

75

14w LED

55

80+

US2OSIG-1-R01-NW

US2OWIG-1-R01-NW

Luminaire Efficacy lm/w

CRI

Code

Luminaire body made of white or silver/grey coated extruded aluminium Diffuser from Opal Acryl-Satiné

Utsu-R2 260

100

14w LED

49

80+

UR2OEIG-1-R01-WW

90-230vAC Input with Triac dimming

260

100

14w LED

55

80+

UR2OEIG-1-R01-NW

white

Custom lengths and systems upon request L1

L2

Lamps

Luminaire Efficacy lm/w

CRI

Utsu-R3

Code

Code

3000K

4000K

970

971

30w LED

50

80+

UR3OEIG-2-L03-WW

UR3OEIG-2-L03-NW

1455

1456 44w LED

50

80+

UR3OEIG-3-L03-WW

UR3OEIG-3-L03-NW

2420

2421

50

80+

UR3OEIG-5-L03-WW

UR3OEIG-5-L03-NW

72w LED

EVG

75

Luminaire body made of white or silver/grey coated extruded aluminium Diffuser from microprismatic screen / Opal Acryl-Satiné

L

max=16mm min=8mm

55

56 × L2

56

30

L

EVG 100

max 20mm

min 10mm

5,5

H

L

A

max=140mm

Utsu-S2 Surface mounted LED luminaire Suitable for wall or ceiling mounting

100 L1 L2


Utsu-S3|P3 LED

Sienna-R1 LED

13

Utsu-S3|P3 Surface & Pendant mounted LED luminaire Suitable for wall or ceiling mounting

L1

Lamps

Luminaire Efficacy lm/w

CRI

Code

Code

Sienna-R1 Recessed-Mounted high output LED downlight

Lamps

Suitable for mounting in ceiling tiles or plasterboard, 10-30mm

Luminaire Efficacy lm/w

CRI

Code

Pendant length 1500mm Luminaire body made of white or silver/grey coated extruded aluminium

Utsu-S3

3000K

4000K

Luminaire body made of die-cast Aluminium

970

30w LED

50

80+

US3OSIG-2-L03-WW

US3OWIG-2-L03-NW

Optical system with interchangeable glass accessories

40w LED

54

80+

SIRWRG-1-P03-WW

Diffuser from microprismatic screen / Opal Acryl-Satiné

1455

44w LED

50

80+

US3OSIG-3-L03-WW

US3OWIG-3-L03-NW

58

80+

SIRWRG-1-P03-NW

72w LED

50

80+

US3OSIG-5-L03-WW

US3OWIG-5-L03-NW

Thermal control via ‘Coliseum’ Heat Sink and Synjet cooler

40w LED

2420

3000K

4000K

Remote 24vDC power supply required Custom lengths and systems upon request

Utsu-P3 970

30w LED

57

80+

UP3OSIG-2-L03-WW

UP3OWIG-2-L03-NW

1455

44w LED

57

80+

UP3OSIG-3-L03-WW

UP3OWIG-3-L03-NW

2420

72w LED

57

80+

UP3OSIG-5-L03-WW

UP3OWIG-5-L03-NW

L2 min 70

L2 100

max 1500

75

75

55

55 L1

L1

On-board Active thermal feed back to reduce the drive current in the event of overheating 0-10v Dimming Input Remote 24vDC Power Supply

White


Delos-R1|R2 LED

Eva-T1|T2 LED

15

Delos-R1|R2 Recessed-Mounted LED downlight Suitable for mounting in ceiling tiles or plasterboard, 10-30mm

Lamps

Luminaire Efficacy lm/w

CRI

Code

Delos-R1 10w LED

65

80+

DERWRG-1-P01-WW

Thermal control via Pin Heat Sink

10w LED

70

80+

DERWRG-1-P01-NW

On-board Active thermal feed back to reduce the drive current in the event of overheating

Delos-R1

Remote 24vDC Power Supply

Luminaire Efficacy lm/w

CRI

Beam

13w LED

62

83+

20°

20° and 40° optics

13w LED

69

83+

Integral 24vDC power supply required

13w LED

62

13w LED

69

Lamps

Suitable universal 3 circuit track mounting

Plaster-In and Directional variants Luminaire body made of machined Aluminium, thermal alloy 6063

0-10v Dimming Input

Eva-T1|T2 Track mounted LED spotlight

White

White

10w LED

65

80+

DER1WRG-1-P01-WW

10w LED

70

80+

DER1WRG-1-P01-NW

Luminaire body made of white coated extruded / cast aluminium Interchangeable glass cover

Thermal control via Pin Heat Sink On-board Active thermal feed back to reduce the drive current in the event of overheating 0-10v Dimming Input

Code

Code

silver

white

ET1ASIG-1-P01-WW

ET1AWIG-1-P01-WW

20°

ET1ASIG-1-P01-NW

ET1AWIG-1-P01-NW

83+

40°

ET1BSIG-1-P01-WW

ET1BWIG-1-P01-WW

83+

40°

ET1BSIG-1-P01-NW

ET1BWIG-1-P01-NW

silver

white

Eva-T1

Eva-T2 34w LED

59

83+

20°

ET2ASIG-1-P01-WW

ET2AWIG-1-P01-WW

34w LED

65

83+

20°

ET2ASIG-1-P01-NW

ET2AWIG-1-P01-NW

34w LED

59

83+

40°

ET2BSIG-1-P01-WW

ET2BWIG-1-P01-WW

34w LED

65

83+

40°

ET2BSIG-1-P01-NW

ET2BWIG-1-P01-NW


Aono-F1 LED

Aono-S1|P1 LED

17

Luminaire Efficacy lm/w

CRI

15w LED

48

80+

AF1FEIG-1-L03-WWG

700

15w LED

53

80+

AF1FEIG-1-L03-NWG

700

15w LED

48

80+

AF1FEIG-1-L03-WWT

700

15w LED

53

80+

AF1FEIG-1-L03-NWT

L

Lamps

700

Integral 24vDC power supply required Custom lengths and systems upon request

Code

silver

38

Aono-S1|P1 Surface & Pendant mounted LED luminaire Suitable for wall or ceiling mounting

Luminaire Efficacy lm/w

CRI

44w LED

50

80+

AS1OERG-3-L03-WW

1470

44w LED

57

80+

AS1OERG-3-L03-NW

1500

550

44w LED

50

80+

AP1OERG-3-L03-WW

1500

550

44w LED

57

80+

AP1OERG-3-L03-NW

L1

L2

lamps

1760

1470

Diffuser from Opal Acryl-Satiné

1760

Remote 24vDC power supply required

Pendant length 1500mm Luminaire body made of white or silver/grey coated extruded aluminium

Code

silver

Custom lengths and systems upon request

39

460

L

308

50 155

L2

320

50 38

L

L2

38

70

1-Längig I 1-Length: DL

39

Luminaire body made of white or silver/grey coated extruded aluminium Diffuser from Opal Acryl-Satiné

L1 2-Längig I 2-Length: DL

.

Aono-F1 Desk mounted LED luminaire Base or clamp mounting

min 20mm max 60mm

DL

38

1200/1500 L1

38

L1


Salzburg-R1|R2 LED

Mito-S1|R1 LED

19

Salzburg-R1|R2 600x600mm Recessed high output LED luminaire Suitable for mounting in ceiling tiles or plasterboard 10-30mm

L

H

Lamps

Luminaire Efficacy lm/w

CRI

Code

Luminaire body made of Powder coated Steel, RAL9016 Involute reflectors from high efficiency ‘White Optics’ Material

Salzburg-R1 595

595

30w LED

47

80+

SAOWIG-3-L03-WW

Opal PMMA diffuser Optic (R1)

595

595

30w LED

50

80+

SAOWIG-3-L03-NW

High output Louvre optic system with interchangeable glass accessory (R2) Thermal control via extruded Aluminium Heat Sink, thermal alloy 6063 0-10v Dimming option Integral 24vDC Power Supply

white

Salzburg-R2

white

595

595

39w LED

59

83+

SALWIG-3-L43-WW

595

595

39w LED

65

83+

SALWIG-3-L43-NW

595

595

62w LED

69

83+

SALWIIG-3-L33-WW

595

595

62w LED

75

83+

SALWIG-3-L33-WW

Mito-S1|R1 Surface & Recessed mounted LED luminaire Suitable for wall or ceiling mounting

Lamps

Luminaire Efficacy lm/w

CRI

Code

Suitable for metal or plasterboard ceilings (max 18mm) Luminaire body made of white coated or anodised aluminium

Mito-S1 21w LED

68

80+

MIRERG-1-R22-WW

Diffuser from 4mm Opal Acryl-Satiné

21w LED

75

80+

MIRERG-1-R22-NW

Remote 24vDC power supply required

Mito-R1 21w LED

68

80+

MISERG-1-R22-WW

21w LED

75

80+

MISERG-1-R22-NW

On-board Active thermal feed back to reduce the drive current in the event of overheating 0-10v Dimming Input

white

white


www.eulum.com info@eulum.com

Eulum Design LTD

Eulum Design LLC

Eulum Design s.r.o.

All products in the catalogue

10 Takeley Business Centre

1456 Ferry Road

Veleslavinova 8

are sold subject to Eulum

Dunmow Road

Suite 502

746 01 Opava

Design Terms and Conditions.

Takeley

Doylestown

CZ

Due to our policy of continual

Essex

PA 18901

product improvement we

CM22 6SJ

US

reserve the right to amend the specification of these products

UK +44 (0) 1279 870027

+1 215 290 8830

+420 608 869 237

at any time.


Eulum Design PureLED (2)