Page 1

custom Keypad solutions

ACTIVe COmPONeNTS CuSTOm KeyPAD SOLuTIONS Active Components provides custom solutions in membrane Switches, Plastic moulded Caps and Silicone Rubber Keypads We have access to a wide range of options to help supply high quality custom designed products to suit your latest OEM product design. Silicone Rubber Products: Keypads (including circuit, metal dome and polydome options) and all other custom silicon rubber parts. membrane Switch Products: Overlays, LED switches, double-sided circuits, multi-layered circuits, membrane switches with insert strip and overlays & rubber keypads. Customised printing, emboss moulding, lamination PET & adhesive, laser cutting and die-cutting. Plastic Products: In-mould decoration keys (IMD), plastic keycaps & rubber keypads, TPE & rubber keypad by co-moulding, and plastic keycaps & rubber keypads & membrane switches. Customised moulding, printing, emboss moulding, painting, laser etching, die-cutting and overcoating.

SILICONe RuBBeR

memBRANe SWITCHeS

Silicone Rubber Keypads are an integral part of many electronic products as a low cost and high quality alternative to mechanical switches. When a pressure is applied to the top of the key the web uniformly deforms, the structure moves down and the conductive pill closes the contacts on the PC Board. When the key is released the web pushes it back to its original position. Silicone Keypad

Widely used in the industrial, medical, instrumentation, security and many other markets the membrane switch is the best solution in harsh environments where the switch must be water or leak proof. A graphic overlay is normally placed over the panel where the membrane switch is used. For a membrane switch there are almost an infinite number of solutions, but the basic design is quite simple - the switch consists of 4 or 6 layers (when a graphic is required). 1 2

Web Rubber Base

Key Travel

A

Basic 6 Layers with Graphics

B

C

Contacts

6 7

Conductive Rubber Pill

The standard Conductive Rubber Pills are round with a diameter from 2 mm to 8 mm and a thickness of 0.4mm (other designs can be made under request). The contact resistance of a standard Conductive Rubber Pill is less than 100 立 with a contact force of 1.47N. Special Conductive Rubber pills can have a contact resistance lower than 10 立 with a contact force of 1.47N.

4 5

Basic 4 Layers

Printed Circuit

3

8

1. 2. 3. 4.

Top Layer - Layer with printed graphic Bi-Adhesive layer Layer with conductive traces printed on back. Layer has connector Bi-Adhesive layer with holes corresponding to contact areas. It acts as a spacer to stop contact areas from touching without pressure being applied 5. Layer with conductive traces. Makes contact with third layer when pressure is applied. Layer has connector 6. Bi-Adhesive layer

OTHeR PRODuCTS Plastic Products Plastic and silicone assemblies provide an affordable solution for electronic switches and cases. Our contracted Engineering department use systems such as CAD, CAE, CAM, Pro/E, UG 4.0 to make the 2D and 3D files for plastic products and tooling.

SW-1

For more information please contact us.

Auckland +64 9 443 9500

Wellington +64 4 915 9500

www.activecomponents.com

Christchurch +64 3 355 4545 sales@activecomponents.com

Victoria +61 3 9775 4778

NSW +61 2 9893 9400

Over one million electronic components online.


dual in-line (dip) switches DIPTRONICS TyPe NDI & Dm

NDI, NDIR SeRIeS DIP PACKAGe CONT.

-Machine Insertable

NDI Series (Raised Actuator) Type Length L (mm)

Gold plated SPST contacts are designed to ensure stable operation and are housed in black moulded bodies, flame retardant to UL94V-0. • • • •

Standard pitch 2.54mm Gold plated spst wiping contacts Low profi le Body colour black

Contact rating ................................... 25mA @24VDC (switching rating) 100mA @50VDC (non-switching rating Electrical life ...................................... 2000 Operations min. @ 24VDC, 25mA Contact resistance ............................. 50mΩ max. initial Insulation resistance .......................... 100MΩ min. at 500VDC Dielectric strength ............................. 500 VAC/1 min. Operation force ................................. 1000 gf max. Storage temperature ......................... -40°C to +85°C Circuit ............................................... SPST

manf. Part No.

1 Pole on-off

3.48

NDIR-01-H

2 Pole on-off

6.02

NDIR-02-H

3 Pole on-off

8.56

NDIR-03-H

4 Pole on-off

11.1

NDIR-04-H

5 Pole on-off

13.64

NDIR-05-H

6 Pole on-off

16.18

NDIR-06-H

7 Pole on-off

18.72

NDIR-07-H

8 Pole on-off

21.26

NDIR-08-H

9 Pole on-off

23.8

NDIR-09-H

10 Pole on-off

26.34

NDIR-10-H

12 Pole on-off

31.42

NDIR-12-H

Dm, DmR SeRIeS SmT PACKAGe Dimensions (mm)

SMD

L 1.9 ON

6.20

materials Cover................................................. Base .................................................. Actuator ............................................ Contact plating ................................. Terminal plating.................................

UL94V-0 PPS, Thermoplastic (Black) UL94V-0 PPS, Thermoplastic (Black) UL94V-0 Nylon, Thermoplastic (White) Gold Plating over Nickel Gold Plated

1

2

3

4

5

6

7

8

0.50

TAP E t= 0.08

9.80±0.3

3 2.54

7.62±0.25

NDI, NDIR SeRIeS DIP PACKAGe

0.70

TYP. 0.70MIN

1.0

Dimensions (mm)

0.7 +0.30 -0.20

0

10˚

1.9

L

DMR SERIES 6.20

ON

2

3

4

5

6

7

Dm Series (Raised Actuator)

8

- Series

2.54

TYP.

0.50

3.50MIN

3.60MAX

NDI

TAPE t=0.08

1

7.62±0.50 NDIR - Series

NDI Series (Raised Actuator) Type Length L (mm) 1 Pole on-off

SW-2

DM SERIES

3.48

manf. Part No.

manf. Part No.

Type

Length L (mm)

1 Pole on-off

3.48

DM-01-H

2 Pole on-off

6.02

DM-02-H

3 Pole on-off

8.56

DM-03-H

4 Pole on-off

11.1

DM-04-H

5 Pole on-off

13.64

DM-05-H

6 Pole on-off

16.18

DM-06-H

7 Pole on-off

18.72

DM-07-H

8 Pole on-off

21.26

DM-08-H

9 Pole on-off

23.8

DM-09-H

10 Pole on-off

26.34

DM-10-H

12 Pole on-off

31.42

DM-12-H

NDI-01-H

2 Pole on-off

6.02

NDI-02-H

DmR Series (Recessed Actuator)

3 Pole on-off

8.56

NDI-03-H

Type

Length L (mm)

4 Pole on-off

11.1

NDI-04-H

1 Pole on-off

3.48

DMR-01-H

5 Pole on-off

13.64

NDI-05-H

2 Pole on-off

6.02

DMR-02-H

6 Pole on-off

16.18

NDI-06-H

3 Pole on-off

8.56

DMR-03-H

7 Pole on-off

18.72

NDI-07-H

4 Pole on-off

11.1

DMR-04-H

8 Pole on-off

21.26

NDI-08-H

5 Pole on-off

13.64

DMR-05-H

9 Pole on-off

23.8

NDI-09-H

6 Pole on-off

16.18

DMR-06-H

10 Pole on-off

26.34

NDI-10-H

7 Pole on-off

18.72

DMR-07-H

12 Pole on-off

31.42

NDI-12-H

8 Pole on-off

21.26

DMR-08-H

Auckland +64 9 443 9500

Wellington +64 4 915 9500

www.activecomponents.com

manf. Part No.

9 Pole on-off

23.8

DMR-09-H

10 Pole on-off

26.34

DMR-10-H

12 Pole on-off

31.42

DMR-12-H

Christchurch +64 3 355 4545 sales@activecomponents.com

Victoria +61 3 9775 4778

NSW +61 2 9893 9400

Over one million electronic components online.


dual in-line (dip) switches DIPTRONICS Type DHN

SMD

-Half-Pitch SMT

A range of low profile, half pitch (1.27mm) surface mount DIL switches. Gold plated SPST contacts are designed to ensure stable operation and are housed in black moulded bodies.

• • • •

DHN Series (6.7mm width)

DHNF Series (8.1mm width) L

L

L

L

Dimensions (mm)

1

2

2

3

3

4

5

4

5

6

6

7

7

8

8

6.70 6.70

1.27 PITCH 0.1± 1.27 PITCH 0.1± 0.1 0.1

4

5

5

6

6

7

7

8

0.4 Manf. Part No.

DHN Series (6.7mm Width) Type Length L (mm)

5.3 5.3 4.5±0.05 4.5±0.05

8

TAPE 1.5± 1.5± TAPE 0.05 0.03 0.05 0.03 1.2

ON

25mA @24VDC (switching rating) 4 5 1 2 3rating) 100mA @50VDC (non-switching 1000 Operations Cycles 100mΩ max. initial 100MΩ min. at 500VDC 300 VAC/1 min. 500gf Storage temperature.......................... -40°C to +85°C

1.27 PITCH 0.1± 0.1

3

4

L

Contact rating.................................... 4.5 Electrical 0˚ life....................................... 0.6 ∼ 10˚ Contact resistance.............................. 1.5± resistance........................... TAPEInsulation 0.6 0.05 Dielectric 0.03 strength.............................. 6.70 Operation force..................................

6

7

0.4 0.4

8 0.6

0˚ ∼ 10˚ 0˚ ∼ 10˚ 0.6±0.1 0.6±0.1 8.1 8.1

1.27 PITCH 0.1± 1.27 PITCH0.10.1± 0.1 5.3 4.5±0.05

0˚ ∼ 10˚ 0.6±0.1

TAPE 1.5± 0.05 0.03

8.1

1.27 PITCH 0.1± DHNF Series (8.1mm Width) 0.1 Type Length L (mm)

Manf. Part No.

2 Pole on-off

6.02

DHN-02F-H

2 Pole on-off

6.02

DHNF-02F-H

4 Pole on-off

11.1

DHN-04F-H

4 Pole on-off

11.1

DHNF-04F-H

6 Pole on-off

16.18

DHN-06F-H

6 Pole on-off

16.18

DHNF-06F-H

8 Pole on-off

21.26

DHN-08F-H

8 Pole on-off

21.26

DHNF-08F-H

10 Pole on-off

26.34

DHN-10F-H

10 Pole on-off

26.34

DHNF-10F-H

DIPTRONICS Type DS, DA & DP -Dual In-line

DS, DSR Series Top Slide Actuator DHNF Series (8.1mm width) Gold plated SPST wiping contacts are housed in red moulded bodies, flame retardant to UL94V-0, with epoxy sealed bases to prevent flux contamination. • Through hole terminals • Gold plated spst wiping contacts • Flame retardant bodies

• Sealed bases • Body colour red

3.50

ON

1 2 3 4

5 6

9.90

8

7 8 1.60

L

7.20MAX.

1.4

7.62±0.50 0.60

Auckland +64 9 443 9500

2.54

TYP.

3.2MIN .

7

2

3

0.6 0.6

1.20

6

1

2

0.6 0.6

L

5

1

0˚ ∼ 10˚ 0˚ ∼ 10˚

TAPE 1.5± 1.5± TAPE0.03 0.05 0.05 0.03

0.4 0.4

1.2 1.2

ON ON 4.5 4.5

0.6 0.6

1.2

Dimensions (mm)

1.2 1.2

ON ON

1

Half pitch 1.27mm Gold plated spst wiping contacts Very low profile Body colour black

Wellington +64 4 915 9500

www.activecomponents.com

DS

0.15±0.05 DSR

Christchurch +64 3 355 4545 sales@activecomponents.com

Contact rating.................................... Electrical life....................................... Contact resistance.............................. Insulation resistance........................... Dielectric strength.............................. Operation force.................................. Storage temperature.......................... Circuit................................................

25mA @24VDC (switching rating) 100mA @50VDC (non-switching rating 2000 Operations min. @24VDC,25mA 50mΩ max. initial 100MΩ min. at 500VDC 500 VAC/1 min. 400 gf max. (DP Series) 1000 gf max. (DS & DA Series) -40°C to +85°C SPST

Materials Cover................................................. Base................................................... Actuator............................................. Contact plating.................................. Top seal.............................................. Potting material..................................

UL94V-0 PBT, Thermoplastic (Red.Black.Blue) UL94V-0 PBT, Thermoplastic (Black) UL94V-0 PBT, Thermoplastic (White) Gold Plating Over Nickel Polyester Film Epoxy

Victoria +61 3 9775 4778

NSW +61 2 9893 9400

Over one million electronic components online.

SW-3


dual in-line (dip) switches DIPTRONICS TyPe DS, DA & DP CONT.

DP, DPL SeRIeS -Piano Key Actuator

DS-03-H

4 Pole on-off

11.52

DS-04-H

5 Pole on-off

14.06

DS-05-H

6 Pole on-off

16.6

DS-06-H

7 Pole on-off

19.14

DS-07-H

8 Pole on-off

21.68

DS-08-H

9 Pole on-off

24.22

DS-09-H

10 Pole on-off

26.76

DS-10-H

12 Pole on-off

31.84

DS-12-H

L C

12.57

1.30 C

C

1 2 3 4 5 6 7 8 ON

manf. Part No. DSR-02-H

3 Pole on-off

8.98

DSR-03-H

4 Pole on-off

11.52

DSR-04-H

5 Pole on-off

14.06

DSR-05-H

6 Pole on-off

16.6

DSR-06-H

7 Pole on-off

19.14

DSR-07-H

Type

8 Pole on-off

21.68

DSR-08-H

2 Pole on-off

9 Pole on-off

24.22

DSR-09-H

3 Pole on-off

10 Pole on-off

26.76

DSR-10-H

12 Pole on-off

31.84

DSR-12-H

2.54

1.30

0.60

TYP.

3.20 MIN

11.52

DP-04-H

14.06

DP-05-H

6 Pole on-off

16.6

DP-06-H

7 Pole on-off

19.14

DP-07-H

8 Pole on-off

21.68

DP-08-H

9 Pole on-off

24.22

DP-09-H

10 Pole on-off

26.76

DP-10-H

31.84

DP-12-H

4

6.90 MAX

DPL Series (Long Key) Length L (mm) 6.44

DPL-02-H

3 Pole on-off

8.98

DPL-03-H

5 4

6 7on-off 8 Pole

5

0.60

6

7

8

1.60

4

2.54

TYP.

2.90 MIN

3

DA Series (Right Angle Slide Actuator) Type Length L (mm)

SW-4

on-off 2.54

7 Pole on-off

9.90

3.50

6 Pole 0.60

0.15±0.05

6.20±0.60

2.54±0.60

manf. Part No.

11.52 14.06 16.6 6.20±0.60

0.15±0.05

2.54±0.60

DPL-04-H DPL-05-H DPL-06-H

19.14

DPL-07-H

8 Pole on-off

21.68

DPL-08-H

9 Pole on-off

24.22

DPL-09-H

10 Pole on-off

26.76

DPL-10-H

12 Pole on-off

31.84

DPL-12-H

DIPTRONICS TyPe RH, RV & Rm -Rotary, Encoded

2 Pole on-off

6.44

DA-02-H

3 Pole on-off

8.98

DA-03-H

4 Pole on-off

11.52

DA-04-H

5 Pole on-off

14.06

DA-05-H

6 Pole on-off

16.6

DA-06-H

7 Pole on-off

19.14

DA-07-H

8 Pole on-off

21.68

DA-08-H

9 Pole on-off

24.22

DA-09-H

10 Pole on-off

26.76

DA-10-H

12 Pole on-off

31.84

DA-12-H

Auckland +64 9 443 9500

TYP.

2.90 MIN

5 Pole on-off ON

manf. Part No.

2 Pole on-off 3.50

1.0

6.90 MAX

Type

1.60

3

DPL DP-02-H

5 Pole on-off

1.0

2

DP

4 Pole on-off

1.40

1

DPL

DP-03-H

L

ON

30

8.98

12 Pole on-off

1.40

DP

6.44

9.90

1.50

12.57

7.62±0.50

0.15±0.05 DP Series (Short Key) manf. Part No. 2.54 0.60 Length L 1.84 (mm)7.62±0.50 TYP.

1.50

L

1.84

1 2 3 4 5 6 7 8 ON

-Right Angle Slide Actuator

2

C

10.30 MAX

6.44

DA SeRIeS

1

30

0.15±0.05

2 Pole on-off

Dimensions (mm)

L

10.8

DS-02-H

8.98

10.8

6.44

3 Pole on-off

10.30 MAX

2 Pole on-off

DSR Series (Recessed Actuator) Type Length L (mm)

Dimensions (mm)

manf. Part No.

3.20 MIN

DS Series (Raised Actuator) Type Length L (mm)

Wellington +64 4 915 9500

www.activecomponents.com

A range of miniature rotary switches with BCD or hexadecimal encoding. Gold plated contacts are housed in black moulded bodies. Choice of screwdriver or finger adjustment. • Bcd or hexadecimal real codes • Screwdriver or fi nger adjust • Body colour black

Christchurch +64 3 355 4545 sales@activecomponents.com

Victoria +61 3 9775 4778

NSW +61 2 9893 9400

Over one million electronic components online.


rotary, encoded switches DIPTRONICS TyPe RH, RV & Rm CONT. Contact rating ................................... 24VDC, 25mA (Switching Rating) 50VDC, 100mA (Non-switching Rating) Electrical life ...................................... Contact Resistance 200mΩ max. 20,000 cycles Contact resistance ............................. 100mΩ max. (initial) Insulation resistance .......................... 100MΩ min. at 250VDC Operation force ................................. (200gf cm) max Storage temperature ......................... -40°C to +85°C Solderability ...................................... 230±5°C 3±sec. 75% Solder resistance ............................... Automatic Soldering Humidity ........................................... 40±2°C 90~95% RH for 96 Hours Thermal test ...................................... 85±2°C for 96 Hours Cold test............................................ -40°C±2°C for 96 Hours

RV3 (Side Adjust) Type

Positions

manf. Part No.

BCD

10

RV3A-10R-H

Hexadecimal

16

RV3A-16R-H

BCD

10

RV3HA-10R-H

Hexadecimal

16

RV3HA-16R-H

Screw Driver Adjust

Finger Adjust

Dimensions (mm) 9.80

RM3

C

8

2

9 .9 0

2 3 4 .5 0

2 3

9 .9 0 [.3 9 0 ] 2 .9 0 [.11 4 ]

0 .2 0

1.20

3 .3 0 [.1 3 0 ]

3.25 [.128]

0

0 .3 0 [.0 1 2 ]

1

3.50 [.138]

7.62±0.5 [.300±.020]

2.54 [.100]

2 .9 0

34 56

2

34 56

2 3

2 .9 0 [.1 1 4 ] 9 .9 0 [.3 9 0 ]

34 56

7 .6 2 [.3 0 0 ]

1

0.25 [.010]

2.54

P.C.B LAYOUT

2.54

RV3-16

4

2.54 [.100]

P.C.B. LAYOUT

1.00 [.039]

4 5 6 1

F

2

F

E

1

4.50 [.177]

E

9

2

1

0.55

4

C C

9

F

0

1

2

7 8

P.C.B LAYOUT

RM3-10

CD

0.55 [.022]

E

RM3-16 789

2.54 [.100]

RH3-10

RH3-16

1

9.80 [.386]

C

8

1

AB

0

0

4

C

5-ø0.90 [.035]

9

7 8

1

0

7 8

2

4 5 6

B CD

B CD

0

C

8

789

Rv3

4 5 6

A

789

5- ø 0.90 [.035]

1.00 [.039]

A

9.80 [.386]

RH3

[.1 0 0 ]

Dimensions (mm)

2 .5 4 1 5 .4 0

2 .70

1.00

13.80 ± 0.3

0.55 [.022]

2.54 [.100]

3.38 [.133]

6.64 [.256]

2.54±0.3 [.100±0.12]

Rm3 (TopRV3-10 Adjust. SmD) SMD Type

RH3 (Top Adjust) Type

Positions

manf. Part No.

BCD

10

RM3A-10R-H

Hexadecimal

16

RM3A-16R-H

BCD

10

RM3HA-10R-H

Hexadecimal

16

RM3HA-16R-H

Screw Driver Adjust

Positions

manf. Part No.

Screw Driver Adjust BCD

10

RH3A-10R-H

Hexadecimal

16

RH3A-16R-H

Finger Adjust

Finger Adjust BCD

10

RH3HA-10R-H

Hexadecimal

16

RH3HA-16R-H

PIHeR TyPe CI-11 -Incremental, Encoded

[.3 0 0 ]

5-ø0.90 [.035]

9.80 [.386]

C

4

2.54 [.100]

P.C.B. LAYOUT

1.00 [.039]

2 3

9 .9 0 [.3 9 0 ] 2 .9 0 [.11 4 ]

F

34 56

1

A range of compact rotary incremental encoders with 2 bit in quadrature encoding. Suitable for applications which require a single or multi-function rotary control interfaced with a digital electronic circuit. • • • •

2 Bit in quadrature code Compact design Endless rotation Detent option

SW-5

1

1 0 .3 0 [.0 1 2 ]

3 .3 0 [.1 3 0 ]

0

9

E

2

2

7 8

0.25 [.010]

RV3-16

C

4 5 6

CD

0

AB

789

8

2 .5 4

Rv3

[.1 0 0 ]

Dimensions (mm)

0.55 [.022]

2.54 [.100]

3.38 [.133]

6.64 [.256]

2.54±0.3 [.100±0.12]

RV3-10 .

Auckland +64 9 443 9500

Wellington +64 4 915 9500

www.activecomponents.com

Christchurch +64 3 355 4545 sales@activecomponents.com

Victoria +61 3 9775 4778

NSW +61 2 9893 9400

Over one million electronic components online.


rotary, encoded switches PIHER Type CI-11 cont.

DIPTRONICS Type DTSM-6

Operating temperature range............ Contact resistance.............................. Pulses/detents.................................... Switch travel....................................... Switch type........................................ Rating................................................. Dielectric strength.............................. Insulation resistance........................... Sliding noise....................................... Switch dielectric strength................... Switch contact resistance................... Phase difference................................. Rotational torque............................... Push-pull strength of shaft................. Operating life..................................... Shaft play in axial direction................ Switch operating force.......................

A range of surface mount tactile switches offering a choice of button style and/or length and operating force, together with an option of packaging method. High reliability with up to 1,000,000 cycle electrical life expectancy.

-Tactile, 6x6mm, Surface Mount

-30°C to +85°C 100mΩ Initial (MAX) 15/30; 20/20 0.5mm SPST 5VDC 10mA (1mA min.) 300VAC for 1 min (Leak current 1mA) 100MΩ (min.) @ 50VDC 1 mA t1, t3< 2ms, t2<2mS (under 360°/S test condition) 300VAC 1 mA for 1 minute 100mΩ (max.) @initial 0.08T min. 0.3 to 2Ncm (detented); 0.5Ncm max. (no detents) 20N (2.0 4kgf) min. 20K cycles (endless rotation) 0.7x L/30mm p-p MAX 4.5±1.5N (450±153gf)

Dimensions (mm) & Connections 11.7 8 5±0.3

11.7 Y

7.3

• • • •

SMD

2 Bit in quadrature code Compact design Endless rotation Detent option

0.5 max.

3.5 L Single pole, single throw 4 terminal normally open, momentary action 9.0 50mA, 12Vdc 4.5 max. 100mΩ 1.7 Term 3.8 No. 100 ±50gf (black button) L1 160 ±50gf (brown button) 3.5 L (red button) 260 ±50gf Pad Pattern 0.25mm 1.3 100MΩ min. at 500Vdc 0.7 250Vac for 1 minuteTerminal ø3.5 No. 1 -25°C to +70°C 6.2 100 & 160gf=1,000,000 cycles min. 6.4 (electrical) Pad Pattern 260gf=500,000 1.3 cycles min. 1.55 (electrical) 4.5 Tape: 16mm wide, 12mm pitch Reel: 330mm dia 6.4

Style

Length

Operating 1.55 (gf) Force

Round

4.3(L)

100

Round

4.3(L)

160

Round

4.3(L)

Button 6.5

A

Bracket Size

B

C

Bracket Size 5

15 pulse version D

D

D

D

ON 7

(A - C) 2.1

+0.1 -0

OFF CW

1.8 +0.1 -0

7.5

ON 5-ø1 HOLES

(B - C)

5 P.C.B.Hole detail

OFF

Graph Code

D-Detent

9.5

Manf. Part No.

Stick 5±0.3

3.8 L1

Contact arrangement......................... Contact rating.................................... Contact resistance.............................. 0.5 max. Operating force.................................. Travel.................................................. 9.0 Insulation resistance........................... Dielectric strength.............................. Operating temp. range....................... Life expectancy.................................. Packaging...........................................

X

X

1.7

1.2

4.2±0.3

0.4

0.5 ±0.4

(SW01) 1

7.5±0.5 2±0.1

4.5 +0 ø6 +0 -0.05 -0.1

7.5±0.5 F LT

SW-6

(SW02)

LB

LS

6.2

Pulses

3.8±0.3

Type

Bushing

F

With Detent, With Switch

Threaded

6.8mm

15

CI11-CT-V1Y22-LFACF

With Detent, Without Switch

Threaded

7.0mm

15

CI11-C0-V1Y22-HF4CF

Round

5.0(L)

100

Round

5.0(L)

160

2

4

DTSM-62K-B DTSM-62N-B

Round

5.0(L)

260

DTSM-62R-B

Round

7.0(L)

100

DTSM-63K-B

Round

7.0(L)

160

Round

7.0(L)

260

DTSM-63R-B

Square

7.3(L1)

100

DTSM-644K-B

Square

7.3(L1)

160

DTSM-644N-B

Square

7.3(L1)

260

DTSM-644R-B

Round

4.3(L)

100

DTSM-61K-T/R

Round

4.3(L)

160

DTSM-61N-T/R

1

3

DTSM-63N-B

Round

4.3(L)

260

DTSM-61R-T/R

Round

5.0(L)

100

DTSM-62K-T/R

Round

5.0(L)

160

DTSM-62N-T/R

Round

5.0(L)

260

DTSM-62R-T/R

Square

7.3(L1)

100

DTSM-644K-T/R

Square

7.3(L1)

160

DTSM-644N-T/R

Square

7.3(L1)

260

DTSM-644R-T/R

N.B. These switches are not suitable for PCB washing (see washable types if necessary).

Manf. Part No.

Wellington +64 4 915 9500

www.activecomponents.com

4

1

3

DTSM-61K-B

DTSM-61N-B Circuit Diagram 260 DTSM-61R-B

Preferred Part Numbers (Many other options available to special order)

Auckland +64 9 443 9500

2

4.5

Tape & Reel Bushing type

Circuit Diagram

Christchurch +64 3 355 4545 sales@activecomponents.com

Victoria +61 3 9775 4778

NSW +61 2 9893 9400

Over one million electronic components online.


3.8 L1 3.5 L 9.0 Terminal No. 1

8

ø3.5 6.2

DIPTRONICS Type DTSM-6 cont. Pad Pattern

Footprint Vertical

4.5

5 L

8

tactile switches

0.7

Vertical

1.7

0.5 max.

1.3

3.8 Dimensions (mm) L1 0.7 0.5 max. 3.5 L 2.4 ø3.5 6.2 9.0

3.5 Terminal No. 1

4.5 1.7

3.8

6.5 L1

3.5 L 0.7

Right Angle

Terminal 1.55 No. 1 9.0 ø3.5 6.2

Right Angle

1.3

4.5

Terminal No. 1

2

6.4 4.5

9.5

3

1

2.5 L

9.5

1.55 0.7

0.3

Button Length (L)

1.55

4.0

6.35

4.5

Circuit Diagram

DIPTRONICS Type DTS-6Circuit & Diagram DTSA-6 2

4

-Tactile, 6x6mm

2

4

A range of pcb mounting tactile switches offering a choice of button style, length and operating force, together with an option of mounting position. High Reliability with up to 500,000 cycle electrical life expectancy. 3 1 Footprint Vertical • 6X6 mm size 3 1 • Positive ‘click’ action and tactile feedback • Established footprint

6.5

100

4.5 DTS-61K

4.3

160

DTS-61N

4.3

260

DTS-61R

5.0

100

DTS-62K

5.0

160

DTS-62N

5.0

260

DTS-62R

7.0

100

DTS-63K

7.0

160

DTS-63N

7.0

260

DTS-63R

9.5

100

DTS-65K

9.5

160

9.5

260

DTS-65R

13.

100

DTS-66K

13

160

DTS-66N

13

260

DTS-66R

3.85

100

DTSA-62K

5.85

100

DTSA-63K

3.85

100

DTSA-65K

4.5

1.8

0.5

Vertical 2

4

1

3

Right Angle

Vertical

3.8

6.5

3.5 L 1.8 0.3

0.7

3.5

4.5

2.4 ø3.5 6.2

Terminal No. 1

6.5 7.9

0.3

7.0

Right Angle

4.5

0.3

4

Circuit Diagram

4.0 0.7

3.5

2.4 ø3.5

1.8 0.4

Vertical

1.8

0.7

0.3

Manf. Part No.

1

3

Right Angle 70

DTS-644U

100

DTS-644K

70

DTSA-644U

100

DTSA-644K

L

7.0 8.5

4.0

6.35

N.B. These switches are not suitable for PCB washing (see washable necessary).

sales@activecomponents.com

Victoria +61 3 9775 4778

4

1

3

0.7

Right Angle

Christchurch +64 3 355 4545

2

2.5

4.5

Vertical

7.0

6.5

2.5

Vertical 2

7.4 6.2

7.2

Square Button -Type DTS-64/DTSA-64

www.activecomponents.com

Circuit Diagram

Footprint

Right Angle

Vertical

Wellington +64 4 915 9500

2.5

DTS-65N

Vertical

Circuit Diagram

Auckland +64 9 443 9500

7.0

Dimensions (mm)

2.5

Operating Force (gf)

Manf. Part No.

4.3

3

Right Angle

Right Angle

Right Angle

Right Angle

Contact arrangement......................... Single pole, single throw 4 terminal normally open, momentary action 4.5 Contact rating.................................... 50mA, 12Vdc Contact resistance.............................. 100mΩ max. Right Angle Operating force.................................. 70 ±50gf (blue button) Footprint 100 ±50gf (black button) 160 ±50gf (brown button) Vertical 4.5 260 ±50gf (red 7.0 button) Travel.................................................. 0.25mm Insulation resistance........................... 100MΩ2.5 min. at 500Vdc 6.5 Dielectric strength.............................. 250Vac for 1 minute Circuit Diagram Operating temp. range....................... -25°C to +70°C Vertical=500,000 cycles min. Life expectancy.................................. 70 to 160gf 4.5 2 4 (electrical) 260gf =50,000 cycles min. Right Angle (electrical) 1

Operating Force (gf)

Vertical

4

1.3 6.4

4.5

Round Button -Type DTS-6/DTSA-6

ø3.5 6.2

Circuit Diagram Pad Pattern

1.8

Vertical

0.7

Pad Pattern

6.5

0.3

9.5

6.4

NSW +61 2 9893 9400

Over one million electronic components online.

Right Angle

SW-7


tactile switches DIPTRONICS Type DTSM-2

DIPTRONICS Type DTS-2 cont.

SMD

-Tactile, 12x12mm, Surface Mount

A range of surface mount tactile switches offering a choice of button style and packaging method. High reliability with up to 500,000 cycle life expectancy. • 12X12mm size • Positive ‘click’ action and tactile feedback Contact arrangement......................... Contact rating.................................... Contact resistance.............................. Operating force.................................. 0.5 Insulation resistance........................... Dielectric strength.............................. Life expectancy..................................

3.8

Single pole, single throw 4 terminal normally open, momentary action 1.8 0.5 50mA, 12Vdc 3.8 100mΩ max. 15.0 1.8 (brown button) 160±50gf 3.8 L1 100MΩ min. at 500Vdc L 3.5 250Vac for 1 minute 15.0 500,000 cycles Pad1.0 pattern

Pad pattern

1.8

0.5

L

12.0

Circuit Diagram 4

2

12.4

L1

4

2

15.5

0.5

1.8

L

L1

15.5

5.0

3.5

3

12.5 13.8

1.0

1.55

Terminal No. 1

Pad pattern

L

3.5 1

5.0

3.8

3

1

1.55

15.0

1.0

0.3

Circuit Diagram

Footprint

Circuit Diagram

12.0

Terminal No. 1

ø7.1 12.0

ø1.2

1.6 4

2

12.4

5.0

3.8

Dimensions (mm)

3.8

12.43.5

Single pole, single throw 4 terminal normally open, momentary action 50mA, 12Vdc 100mΩ max. 160 ±50gf (Brown Button) 260 ±50gf (Red Button) 0.35mm 100MΩ min. at 500Vdc 250Vac for 1 minute -25°C to +70°C 160gf =500,000 cycles min. (electrical) 260gf =50,000 cycles min. (electrical)

Circuit Diagram

1.6

3.8

3.5

1.6 ø7.1 12.0

Terminal No. 1

Dimensions (mm)

3.8

Contact arrangement......................... Contact rating.................................... Contact resistance.............................. Operating force.................................. Travel.................................................. Insulation resistance........................... Dielectric strength.............................. L1 Operating temp. range....................... Life expectancy.................................. 1.0 Terminal ø7.1 No. 1

15.5

2

4

1

3

12.5 3

1

1.55

5.0

5.0

Button Length (L)

Operating Force (gf)

Manf. Part No.

Round

4.3 (L)

DTSM-21N-B

Square

7.3 (L1)

DTSM-24N-B

Button Length (L)

Stick

Manf. Part No.

4.3 (L)

160

DTS-21N

4.3 (L)

260

DTS-21R

Round Button

Tape & Reel

SW-8

Operating Force (gf)

Square Button

Round

4.3 (L)

DTSM-21N-T/R

7.3 (L1)

160

DTS-24N

Square

7.3 (L1)

DTSM-24N-T/R

7.3 (L1)

260

DTS-24N

DIPTRONICS Type DTS-2

DIPTRONICS Type DTS-3

-Tactile, 12x12mm

-Tactile, 3.5x6mm, Surface Mount

A range of pcb mounting tactile switches offering a choice of button style and operating force. High reliability with up to 500,000 cycle electrical life expectancy.

A range of miniature pcb mounting tactile switches offering a choice of button length.

• • • •

12X12mm size Positive ‘click’ action and tactile feedback High reliability, longer life 3.8 Established footprint

5.0

1.8

0.5

SMD

• Miniature 3.5X6mm size • Positive ‘click’ action and tactile feedback • 2 Terminal mounting

3.8 L1

3.5

L

12.5 13.8

Auckland Footprint ø1.2 +64 9 443 9500

3.5

L

12.0

Terminal 1.8 3.8 No. 1

2

3.5

6.0

6.5 ø1.3

L1

L

Wellington Circuit Diagram +64 4 915 9500 3.5

0.3 12.5 www.activecomponents.com 13.8

Footprint

0.5 max.

1.0

0.3 0.5

1.5

3.0

5.0

3.5 3.8

4

Christchurch +64 3 355 4545 1.0

sales@activecomponents.com 12.0 Terminal No. 1

1.8

Victoria0.25 3.5 +61 3 9775 4778 6.5

NSW +61 2 9893 9400

1.0 3.5 online. Over one million electronic components 7.9

Circuit diagram 1

2


tactile switches DIPTRONICS Type DTS-3 cont. 1.5

3.0

Footprint

0.5 max. L

3.5

1.8

0.25

DIPTRONICS Type DTSM-3 cont.

6.5

DTSM-3

ø1.3

6.0

Button Length (L)

Circuit diagram 3.5

Manf. Part No.

Stick

6.5

2

1

1.0 3.5

7.9

Dimensions (mm)

4.3

DTSM-31N-B

5.0

DTSM-32N-B

Tape & Reek

Contact arrangement......................... Dimensions (mm) Contact rating.................................... Contact resistance.............................. Operating force.................................. Travel.................................................. Insulation resistance........................... Dielectric strength.............................. Operating temp. range....................... Life expectancy..................................

Single pole, single throw 4 terminal normally open, momentary actio 50mA, 12Vdc 100mΩ max. 160 ±50gf (Brown Button) 0.25mm 100MΩ min. at 500Vdc 250Vac for 1 minute -25°C to +70°C 50,000 cycles min. (electrical)

Button Length (L)

Manf. Part No.

4.3

DTS-31N-B

5.0

DTS-32N-B

4.3

square 4.5mm dia. 4mm DTSM-31N-T/R

5.0

DTSM-32N-T/R

N.B. These switches are not suitable for PCB washing

Tactile, Switch11.5mm Caps dia. A range of moulded caps for use with Diptronics 6x6mm & 12x12mm square button tactile switches. Available in round or square style, each with a choice of 6 different colours.

12mm4.5mm square dia. 4mm square 4.5mm dia. 4mm square

11.5mm 4.5mm dia. dia. 4mm square 11.5mm dia.

Dimensions......................................... Dia. 4.5 H. 5.5

N.B. These switches are not suitable for PCB washing

CAPS for 6x6mm Tactile Switches

DIPTRONICS Type DTSM-3 -Tactile, 3.5x6mm, Surface Mount

Colour

Manf. Part No. Round -4.5mm dia.

Manf. Part No. 12mm square Square -4x4mm

Black

KTSC-62K

KTSC-61K

Red

KTSC-62R

KTSC-61R

Yellow

KTSC-62Y

KTSC-61Y

SMD Dimensions (mm)

1.5

Pad Pattern

3.0

7.4

0.5 max. L

3.5

1.5

KTSC-62B

KTSC-61B

KTSC-62G

KTSC-61G

Ivory

KTSC-62I

KTSC-61I

2

1

1.0 L

3.5

3.5

1.6

6.0

Circuit DiagramCAPS for 12x12mm Tactile Switches

7.2

A range of miniature surface mount tactile switches offering a choice of button length, together with an option of packaging method.

1.0

• Miniature 3.5X6mm size • Positive ‘click’ action and tactile feedback • 2 Terminal mounting Contact arrangement......................... Contact rating.................................... Contact resistance.............................. Operating force.................................. Travel.................................................. Insulation resistance........................... Dielectric strength.............................. Operating temp. range....................... Life expectancy.................................. Packaging...........................................

Single pole, single throw 4 terminal normally open, momentary action 50mA, 12Vdc 100mΩ max. 160 ±50gf (Brown Button) 0.25mm 100MΩ min. at 500Vdc 250Vac for 1 minute -25°C to +70°C 50,000 cycles min. (electrical) Tape: 16mm wide, 8mm pitch Reel: 330mm dia

Wellington +64 4 915 9500

www.activecomponents.com

Pad Pattern 7.4 Dimensions......................................... Dia. 11.5 (13 at base) W. 12, D. 12 3.4 H. 5.7 inc. 1.5 for base H 4.0

0.5 Circuit Diagram max.

7.2

Auckland +64 9 443 9500

Blue Green

3.4 1.6 3.0

6.0

W. 4, D. 4

H 5.5 12mm square 12mm square 11.5mm dia.

Christchurch +64 3 355 4545 sales@activecomponents.com

3.5

2

1

Colour

Manf. Part No. Round -11.5mm dia.

Manf. Part No. Square -12x12mm

Black

KTSC-22K

KTSC-21K

Red

KTSC-22R

KTSC-21R

Yellow

KTSC-22Y

KTSC-21Y

Blue

KTSC-22B

KTSC-21B

Green

KTSC-22G

KTSC-21G

Ivory

KTSC-22I

KTSC-21I

SW-9

Victoria +61 3 9775 4778

NSW +61 2 9893 9400

Over one million electronic components online.


tactile switches DIPTRONICS Type DTSJW, DTSMW & DTSHW-6

DIPTRONICS Type DTSJW, DTSMW & DTSHW-6 cont.

-Tactile, 6x6mm, Washable

DTSHW

(L=2.3)

6.2 ø3.0 6.3

(L=2.3)

0.7 Terminal No. 1

ø3.0 6.3

0.7

Terminal ø3.0 No. 1 6.3

DTSJW (J Lead)

DTSMW (Gull Wing) 1.4

1.4

0.7

2.3

8.6

6.8

Circuit Diagram

DTSHW

(all types)

ø1.0

11.0

2.1

4

6.5 1

4.0

3

4.0

4.0

180

DTSHW-69N-B-H

3.8

260

DTSHW-69R-B-H

• • • • •

6X6 mm size Low profile Spno momentary contacts High reliability, longer life Supplied in sticks or taped & reeled

Dimensions (mm) ELTSGL-6 ELTSGL-6 1 1

A range of surface mount and through hole washable tactile switches with a round button. Choice of button length and operating force. Lead form and packaging option on surface mount parts. Designed to meet the increasing demand for sealed tactile switches to withstand pcb washing.

ELTSGL-6 ELTSGL-6

ELTSL-6 ELTSL-6 1 1

2 2 5 5 4 4

3 3

4 4

ELTSL-6 ELTSL-6

9.50 9.50 4.00 4.00

2.602.60 ELTSGL-61 7.20

0.5

6.20 3.30

4 .0 0

Single pole, single throw 4 terminal normally open, momentary action 50mA, 12Vdc 100mΩ max. 100MΩ min. at 500Vdc 250Vac for 1 minute 100,000 cycles min. (electrical) for DTS*W -66N, 68S 500,000 cycles min. (electrical) for DTS*W -69N, 69R

2 2

3 3

9.50 9.50 4.00 4.00

• 6X6 mm size • Sealed construction suitable for pcb washing • Positive ‘click’ action and tactile feedback Contact arrangement......................... Contact rating.................................... Contact resistance.............................. Insulation resistance........................... Dielectric strength.............................. Life expectancy..................................

SMD

A range of 6x6mm size low profile surface mount tactile switches offering a choice of button style and packaging method.

Footprint

2

4.0

3.8

-Tactile, 6x6mm, Surface Mount

*Button flush with body on 68S types Pad Pattern

DTSHW-66N-B-H

SALECOM Type ELTSGL & ELTSL

6.2

6.2

DTSHW-68S-B-H

160

3.5

4.0 2.0

4.0 2.0

160

3.1

5.405.40

4.0 2.0 (L=2.3)

2.3 (Flush)

2.602.60

6.5 7.9

9.0

Manf. Part No.

5.8 0

4.5 6.8

2.3 to L* 2.85

Operating Force (gf)

0 .7 0

2.3 to L* 2.85

2.3 to L* 2.85

Button Length (L)

5.405.40

DTSMW (Gull Wing)

Through Hole Type

DTSHW

6 .4 0 .3

DTSJW (J Lead)

Terminal No. 1

B3S (Gull Lead)

B3SN (J Lead)

Dimensions (mm)

Surface Mount Type

160

DTSJW-68S-B-H

DTSJW-68S-T/R-H

160

DTSJW-66N-B-H

DTSJW-66N-T/R-H

180

DTSJW-69N-B-H

DTSJW-69N-T/R-H

3.8

260

DTSJW-69R-B-H

DTSJW-69R-T/R-H

5 .8 0

3.1 3.8

6 .4 0 .3

SW-10

6.20

3.60 0.3

3.30

DTSJW (J Lead) 2.3 (Flush)

7.20 0.5

2 .5 0

Manf. Part No.

2 .0 0

Manf. Part No.

4 .0 0

Button Length (L)

1 .2 0 .3

ELTSL-61

Operating Force (gf)

DTSMW (Gull Wing) 2.3 (Flush)

160

DTSMW-68S-B-H

DTSMW-68S-T/R-H

3.1

160

DTSMW-66N-B-H

DTSMW-66N-T/R-H

3.8

180

DTSMW-69N-B-H

DTSMW-69N-T/R-H

3.8

260

DTSMW-69R-B-H

DTSMW-69R-T/R-H

Auckland +64 9 443 9500

Wellington +64 4 915 9500

www.activecomponents.com

Christchurch +64 3 355 4545 sales@activecomponents.com

Victoria +61 3 9775 4778

NSW +61 2 9893 9400

Over one million electronic components online.


tactile switches SALeCOm TyPe eLTSGL & eLTSL CONT.

SALeCOm TyPe eLTSK

Contact arrangement ........................ Single pole, single throw 4 or 5 terminal normally open, momentary action Contact rating ................................... 50mA, 12Vdc Contact resistance ............................. 100mΩ max. Insulation resistance .......................... 100MΩ min. at 500Vdc Dielectric strength ............................. 250Va c for 1 minute Life expectancy ................................. 500,000 cycles for 260gf 1,000,000 cycles for 100gf, 160gf

eLTSGL (Ground Terminal Option) Operating Force (gf)

Button Length (L)

Package Type

manf. Part No.

100

2

Stick

ELTSGL-60K-B-H

100

2.5

Tape/Reel

ELTSGL-61K-T/R-H

160

2

Stick

ELTSGL-60N-B-H

160

2.5

Tape/Reel

ELTSGL-61N-T/R-H

260

2

Stick

ELTSGL-60R-B-H

260

2.5

Tape/Reel

ELTSGL-61R-T/R-H

A range of 5x5mm size extra low profi le surface mount tactile switches offering a choice of button style. • • • •

5X5 mm size Extra low profi le Spno momentary contacts Supplied taped & reeled

Contact arrangement ........................ Single pole, single throw 4 terminal normally open, momentary action Contact rating ................................... 50mA, 12Vdc Contact resistance ............................. 100mΩ max. Insulation resistance .......................... 100MΩ min. at 500Vdc Dielectric strength ............................. 250Vac for 1 minute Life expectancy ................................. 30,000 to 50,000 cycles

eLTSK Operating Force (gf)

Button Length (L)

160

0.8

ELTSK-51N-T/R-H

160

1.5

ELTSK-52N-T/R-H

260

0.8

ELTSK-51R-T/R-H

260

1.5

ELTSK-52R-T/R-H

eLTSL Operating Force (gf)

Button Length (L)

SMD

-Tactile, 5x5mm, Surface Mount

Package Type

manf. Part No.

100

2

Stick

ELTSL-60K-B-H

100

2.5

Tape/Reel

ELTSL-61K-T/R-H

160

2

Stick

ELTSL-60N-B-H

160

2.5

Tape/Reel

ELTSL-61N-T/R-H

260

2

Stick

ELTSL-60R-B-H

260

2.5

Tape/Reel

ELTSL-61R-T/R-H

1

Dimensions (mm)

manf. Part No.

2.0

2

0.5

Circuit Diagram

3.7 0.1 5.2

3

4

5.2

1

2

3

4 Pad Pattern

0.8

1.2

1.5±0.2

8.0 4.4

6.4

4.8 2.6

mec

meC TACTILe SWITCHeS mec specialises in the production of PCB mounted push button switches. The products are designed to be used in a wide variety of applications. Through the use of a modular approach to switch assembly, the user is provided with a unique flexibility in their choice of options.

multimec® switches are known for their crisp audible tactile feel although a “quiet” model is available for sensitive applications such as audio and conference equipment. The multi coloured keycaps, bezels and LEDs snap together to produce almost unlimited switch configurations. Customised keycaps and bezels can be manufactured for special applications.

SW-11

Auckland +64 9 443 9500

Wellington +64 4 915 9500

www.activecomponents.com

Christchurch +64 3 355 4545 sales@activecomponents.com

Victoria +61 3 9775 4778

NSW +61 2 9893 9400

Over one million electronic components online.


toggle switches SALeCOm TyPe TS40-T

SALeCOm TyPe TS40-T CONT.

-Toggle, Sub Miniature

DPDT

A range of highly reliable, cost effective solder lug or PCB mount subminia-ture toggle switches available in vertical or horizontal mounting styles.

6.10 ø

10-48UNS

8.13

2.54 ø

1 E 123142

E 123142

9.40

TS-5 - SEBQ

5.59

3

5

2

4

1

1.52

8.64

Switching Position

model No.

materials Case ........................................ Diallyl Phthalate (DAP) Toggle handle.......................... Copper Alloy, Chrome Plated Bushing ................................... Copper Alloy, Nickel Plated Housing ................................... Stainless Steel Contact and terminal .............. Copper Alloy, Silver Plated Switch support ........................ Copper Alloy, Tin-Plated

2.54

2.79

9.14

Contact rating ......................... 3A@120VAC or 28VDC (Q Contact) Electrical life ............................ 30,000 make-and-break cycles at full load Contact resistance ................... 20mΩ max. initial @2-4VDC, 100mA Insulation resistance ................ 1000MΩ min. Dielectric strength ................... 1500 V RMS @ sea level Operating temperature ........... -30°C to +85°C

6

6 5 4

2

4.39

4.06

0.51

3

• SPDT & DPDT Confi guration • Low contact resistance

4.06

manf. Part No. PCB Type Solder Type

TS-5

ON

none

ON

TS5SECQE-H

TS5SEBQE-H

TS-5A

ON

OFF

ON

TS5ASECQE-H

TS5ASEBQE-H

TS-5B

ON

none

(ON)

TS5BSECQE-H

TS5BSEBQE-H

TS-5H

(ON)

OFF

(ON)

TS5HSECQE-H

TS5HSEBQE-H

TS5ISECQE-H

TS5ISEBQE-H

TS5CSECQE-H

TS5CSEBQE-H

TS-5I

ON

OFF

(ON)

Term Comm.

2-3, 5-6

open

2-1, 5-4

ON

ON

3 Way Switches (SP3T) TS-5C

ON

Term Comm.

SPDT FLAT

25

FLAT

2-3, 5-6 2-3, 5-4 2-1, 5-4

DPDT RIGHT ANGLe 6.10 ø

10-48UNS

25 3 4.39

8.13

Dimensions (mm) 0.51

2.54 ø 3

2

9.40

TS-4 - SEBQ

5.59

8.64

1

4.06

1 4 0.76

3

TS-4

ON

none

ON

TS4SECQE-H

TS4SEBQE-H

TS-4A

ON

TS-4B

ON

OFF

ON

TS4ASECQE-H

TS4ASEBQE-H

none

(ON)

TS4BSECQE-H

TS-4H

(ON)

TS4BSEBQE-H

OFF

(ON)

TS4HSECQE-H

TS4HSEBQE-H

TS-4I

ON

OFF

(ON)

TS4ISECQE-H

TS4ISEBQE-H

Term Comm.

2-3

open

2-1

SPDT RIGHT ANGLe

2 (COMM) 5.59

5.33

1

8.13

3 0.51

2.54 5.08

model No. TS-7

0.51

3.30

0.76

PCB Type ON

none

ON

TS7TE1QE-H TS7ATE1QE-H

ON

OFF

ON

ON

none

(ON)

TS7BTE1QE-H

TS-7H

(ON)

OFF

(ON)

TS7HTE1QE-H TS7ITE1QE-H

TS-7I

ON

OFF

(ON)

Term Comm.

2-3, 5-6

open

2-1, 5-4

ON

ON

ON

TS7CTE1QE-H

2-3, 5-6 2-3, 5-4 2-1, 5-4

Note: (ON) represents momentary ‘ON’.

2.54

3.86

TS-6 - TE1Q

6

manf. Part No.

TS-7B

Term Comm.

1 2 3

0.41

4

3 Way Switches (SP3T)

1

0.76

Switching Position

3

TS-7A

TS-7C

5.08

2 (COMM) 5 1

TS-7 - TE10

0.51 2.54

3.86

manf. Part No. PCB Type Solder Type

1 2 3

3.30

0.41 0.76

5.08

Switching Position

5 6

0.51

2 (COMM) 1

model No.

4

1.52

2.79

5.08

8.13

5.59

2

2.54

2 1

1

5.33

3

C&K T SeRIeS

5.08

-Toggle, Sub Miniature model No.

SW-12

Switching Position

manf. Part No. PCB Type

TS-6

ON

none

ON

TS6TE1QE-H

TS-6A

ON

OFF

ON

TS6ATE1QE-H

TS-6B

ON

none

(ON)

TS6BTE1QE-H

TS-6H

(ON)

OFF

(ON)

TS6HTE1QE-H TSITE1QE-H

TS-6I

ON

OFF

(ON)

Term Comm.

2-3

open

2-1

Auckland +64 9 443 9500

Wellington +64 4 915 9500

www.activecomponents.com

A range of highly reliable, high quality panel mounting sub miniature toggle switches with solder lug terminations or PCB pins. • SPDT & DPDT Confi guration • Low contact resistance

SHCQE PCB SHZQE Solder

Christchurch +64 3 355 4545 sales@activecomponents.com

Victoria +61 3 9775 4778

NSW +61 2 9893 9400

Over one million electronic components online.


toggle switches C&K T SeRIeS CONT.

C&K T SeRIeS CONT. DPDT GOLD PLATeD

Contact rating ......................... B contact material:0.4VA max.@20VAC or DC max. Q contact material (TX01 models): 3 AMPS@120VAC or 28VDC Other models:2 AMPS@120 VAC or 28VDC Electrical life ............................ TX01 models:60,000 make-and-break cycles at full load. Other models: 30,000 cycles. Contact resistance ................... Below 20mΩ initial @2-4VDC, 100mA, for both silver and gold plated contacts. Insulation resistance ................ 109Ω min. Dielectric strength ................... 1000 Vrms min. @ sea level Operating temperature ........... -30°C to +85°C

-(B Contact Material)

POS.3

9.40 GOLD 5.59 PLATeD 8.64 SPDT

FLAT

10-48UNS-2A 25˚ POS.3

C&K MARKING ON OPPOSITE SIDE EPOXY SEAL

3

1

2.54ø

POS.1

1 2.79

T101SHZQE

9.40

5.59

8.64

8.64

Pos. 1

Pos. 2

Pos. 3

3 2 1

TERM. WIDTH 1.52 2.79 4.06

2 (COMM) 1

3

5 4

6

manf. Part No. PCB Type

Solder Type

T201

ON

none

ON

T201SHCBE

T201SHZBE

T203

ON

OFF

ON

T203SHCBE

T203SHZBE

T205

(ON)

OFF

(ON)

T205SHCBE

T205SHZBE

T208

ON

none

(ON)

T208SHCBE

T208SHZBE

Term Comm.

2-3, 5-6

open

2-1, 5-4

Switch Function model No. Pos. 1

Pos. 2

Pos. 3

manf. Part No. PCB Type

Solder Type

T201

ON

none

ON

T201SHCQE

T201SHZQE

T203

ON

OFF

ON

T203SHCQE

T203SHZQE

T205

(ON)

OFF

(ON)

T205SHCQE

T205SHZQE

T208

ON

none

(ON)

T208SHCQE

T208SHZQE

Term Comm.

2-3, 5-6

open

2-1, 5-4

C&K marking on opposite side Note: (ON) represents momentary ‘ON’. Right angle mount and many other variations also available

SALeCOm TyPe eS40-T

1.52

-Toggle, Sub Miniature, Sealed

TERM. WIDTH Dimensions (mm)

4.06

5.59

6 5 4

SILVeR PLATeD -(Q Contact Material)

3 2 1

8.13

9.40

8.13

2.54

C&K marking on opposite side

5.08

2.54

3 2

POS.2

6 5 4

model No.

2 (COMM)

0.51

4.06

0.51

Switch Function

1.52

4.06

25˚ 2.54ø

POS.1

T201SHZQE

9.14

EPOXY SEAL

POS.2

TERM. WIDTH

-(B Contact Material)

FLAT

10-48UNS-2A

materials Case ........................................ Glass filled nylon 6/6, flame retardant, heat stabilised or diallyl phthalate (DAP), (UL 94V-0) Actuator .................................. Brass, chrome plated Bushing ................................... Brass, nickel plated Housing ................................... Stainless Steel Switch support ........................ Brass, matte tin plated End contacts ........................... B contact material: copper alloy, with gold plate over nickel plate. Q contact material: coin silver, silver plated Center contacts & terminalsC&K .... MARKING B contactON material: copper alloy, with gold OPPOSITE SIDE plate over nickel plate. FLAT 10-48UNS-2A EPOXY SEAL 5.08 Q contact material: copper alloy, silver plate 0.51 25˚Terminal seal ........................... Epoxy 2.54ø POS.3 2.54 3 Hardware 3 POS.2 8.13 2 Nut & locking ring ............... Brass, nickel plated 2 1 POS.1 Lockwasher ......................... Steel, nickel plated 1 2.79

C&K MARKING ON OPPOSITE SIDE

Dimensions (mm)

A range of highly reliable, cost effective sealed PCB 2 (COMM)mount sub-miniature toggle switches. Available in

Switch Function

manf. Part No.

model No. Pos. 1

Pos. 2

Pos. 3

PCB Type

1

3

Solder Type

T101

ON

none

ON

T101SHCBE

T101SHZBE

T103

ON

OFF

ON

T103SHCBE

T103SHZBE

T105

(ON)

OFF

(ON)

T105SHCBE

T105SHZBE

T107

ON

OFF

(ON)

T107SHCBE

T107SHZBE

T108

ON

none

(ON)

T108SHCBE

T108SHZBE

Term Comm.

2-3

open

2-1

C&K marking on opposite side

SPDT SILVeR PLATeD -(Q Contact Material) Switch Function

manf. Part No.

model No. T101

Pos. 1

Pos. 2

Pos. 3

ON

none

ON

PCB Type

Solder Type

T101SHCQE

T101SHZQE

T103

ON

OFF

ON

T103SHCQE

T103SHZQE

T105

(ON)

OFF

(ON)

T105SHCQE

T105SHZQE

T107

ON

OFF

(ON)

T107SHCQE

T107SHZQE

T108

ON

none

(ON)

T108SHCQE

T108SHZQE

Term Comm.

2-3

open

2-1

Auckland C&K9marking on opposite side +64 443 9500

Wellington +64 4 915 9500

www.activecomponents.com

Christchurch +64 3 355 4545 sales@activecomponents.com

vertical or horizontal mounting styles. • IP67 Rated • SPDT & DPDT Confi guration • Low contact resistance Contact rating ......................... R-0.4 VA max @ 20 VAC or DC Electrical life ............................ 30,000 make-and-break cycles at full load Contact resistance ................... 20mΩ max. initial @2-4VDC, 100mA Insulation resistance ................ 1000MΩ min. Dielectric strength ................... 1500 V RMS @ sea level ESD Resistant pption: .............. P2 insulating actuator only: 9000 VDC min. @ sea level, actuator to terminals Degree of protection ............... IP67 Operating temperature ........... -30°C to +85°C materials Case & bushing ....................... Glass filled nylon 6/6, flame retardant heat stabilised (UL 94V-0) Actuator .................................. Copper Alloy, Chrome Plated, internal o-ring seal standard with all actuators P2/ the anti-static actuator ...... Nylon 4/6, black standard (UL 94V-0) Contact and terminal .............. Copper Alloy, Silver Plated Switch support ........................ Copper Alloy, Tin-Plated Terminal seal ........................... Epoxy

Victoria +61 3 9775 4778

NSW +61 2 9893 9400

Over one million electronic components online.

SW-13


toggle switches SALECOM type ES40-T cont.

SALECOM type ES40-T cont.

SPDT

DPDT Right Angle

Dimensions (mm)

2 Comm

25 1

6.10

EPOXY SEAL 0.51

3 3 2

POS 2 POS 1

2.54 13.39

8.13

5.08

1 0.76 TERM. WIDTH

2 Comm 1

Model No.

8.13

ES-4H 1 2 3 ES-4I 2 Comm Term Comm. 5.08 3

0.76 1

Manf. Part No.

ON

none

ON

ES4P2CR-H

ON

OFF

ON

ES4AP2CR-H

ON

none

(ON)

ES4BP2CR-H

(ON)

OFF

(ON)

ES4HP2CR-H

ON 0.51 2-3

OFF

(ON)

ES4IP2CR-H

open

2-1

4.11

EPOXY SEAL 0.51

5.08 ES-6 - T2R-S

0.38 4.19 5.08

Manf. Part No. PCB Type

ES-7

ON

none

ON

ES7T2RS-H

ES-7A

ON

OFF

ON

ES7AT2RS-H

ES-7B

ON

none

(ON)

ES7BT2RS-H

ES-7H

(ON)

OFF

(ON)

ES7HT2RS-H ES7IT2RS-H

ES-7I

ON

OFF

(ON)

Term Comm.

2-3, 5-6

open

2-1, 5-4

ON

ON

ON

ES7CT2RS-H

2-3, 5-6 2-3, 5-4 2-1, 5-4

Note: (ON) represents momentary ‘ON’.

SALECOM type T80-T

5.08

3

Dimensions (mm)

Switching Position

ES-7C

0.51

2 Comm 1

2.54 5.08

Term Comm. 1 2 3

0.76

0.51 5.08

3 Way Switches (SP3T)

8.13

3.30

4.19

6

Model No.

5.08 0.76

4

3.30

0.76

ES-7- T2R-S

SPDT Right Angle 6.10

3

0.38 5 Comm

ES-7- T2RS

PCB Type

ES-4 EPOXY SEAL ES-4A 0.51 ES-4B 5.08 3.30

5.08

Switching Position

1 2 3

0.76

2

3.30

ES-4-T1CR

ES-4- T1CR

9.14

3

1 10.16

0.51

5.08

4.50

8

8.13 4 5 6

EPOXY SEAL

2.54 ø

POS 3

4.11

4.11

4.57

-Toggle, Miniature Switching Position

Model No.

Manf. Part No.

A range of highly reliable, cost effective miniature toggle switches. Available in single, double, 3 and 4 pole switch configurations.

PCB Type

ES-6

ON

none

ON

ES6T2RS-H

ES-6A

ON

OFF

ON

ES6AT2RS-H

ES-6B

ON

none

(ON)

ES6BT2RS-H

ES-6H

(ON)

OFF

(ON)

ES6HT2RS-H

ES-6I

ON

OFF

(ON)

ES6IT2RS-H

Term Comm.

2-3

open

2-1

• Solder lug terminals or pcb pins • SPDT, DPDT, 3PDT & 4PDT Configuration • Low contact resistance Contact rating............................. 5A @125VAC or 28VDC (Q Contact) Electrical life................................ 50,000 make-and-break cycles at full load Contact resistance....................... 10mΩ max. initial @2-4VDC, 100mA Insulation resistance.................... 1000MΩ min. Dielectric strength....................... 1500 V RMS @ sea level Operating temperature............... -30°C to +85°C

DPDT Dimensions (mm)

25 POS 3

2 Comm

1

3

5 Comm

4

6

0.51

2.54 ø 6 5 4

POS 2 POS 1 4.50 10.16

9.14

EPOXY SEAL

2.54 3.30

13.39

5.08

6 8.13 5

3 2

4

1 0.76 TERM. WIDTH

Materials Case............................................ Diallyl phthalate (DAP) Toggle handle............................. Copper Alloy, Chrome Plated Bushing....................................... Copper Alloy, Nickel Plated Housing....................................... Stainless Steel Contact and terminal.................. Copper Alloy, Silver Plated

4.57

ES-5- T1CR

SPDT 2.92 ø

Model No. ES-5

SW-14

Switching Position

PCB Type ON

none

ON

ON

OFF

ON

ES-5B

ON

none

(ON)

ES5BP2CR-H

ES-5H

(ON)

OFF

(ON)

ES5HP2CR-H

ES-5I

ON

OFF

(ON)

ES5IP2CR-H

2-3, 5-6

open

2-1, 5-4

ON

ON

ON

KEYWAY

T8013 - SEBQ

25 12.70

ES5P2CR-H

ES-5A

Term Comm.

0.76

Manf. Part No.

4.70

ES5AP2CR-H 10.41

8.89

Dimensions (mm)

8.89

3

2

1/4-40UNS

1

6.86

12.83 KEYWAY THIS SIDE

2 Comm 1

3

3 Way Switches (SP3T) ES-5C Term Comm.

ES5CP2CR-H

2-3, 5-6 2-3, 5-4 2-1, 5-4

Auckland +64 9 443 9500

Wellington +64 4 915 9500

www.activecomponents.com

Christchurch +64 3 355 4545 sales@activecomponents.com

Victoria +61 3 9775 4778

NSW +61 2 9893 9400

Over one million electronic components online.


KEYWAY THIS SIDE

toggle switches 0.76

2.92 ø

KEYWAY

4.70

25 12.70

SALECOM type T80-T SPDT cont. Switching Position

Model No.

21.59

Manf. Part No. PCB Type Solder Type

SALECOM type T80-T cont. 10.54 1/4-40UNS

4PDT

ON

none

ON

T8013SECQE-H

T8013SEBQE-H

T8013A

ON

none

(ON)

T8013ASECQE-H

T8013ASEBQE-H

KEYWAY8.89 10.41

T8014

ON

OFF

ON

T8014SECQE-H

T8014SEBQE-H

T8014A

(ON)

OFF

(ON)

T8014ASECQE-H

T8014ASEBQE-H

T8014B

ON

OFF

(ON)

T8014BSECQE-H

T8014BSEBQE-H KEYWAY

Term Comm.

2-3

open

2-1

12.70

2 Comm

1

3

4

6

0.76

2.92 ø 25

8.89

3

5

2 1

4.83

KEYWAY

8.89

6

4

4.70 10.41

21.59

0.76 10.41 8.89

12.83 2 Comm 1

3

4

12.70

5 Comm 6

1/4-40UNS

11.43

Switching Position

Model No. T8011 - SEBQT8011

Manf. Part No. PCB Type Solder Type

ON

none

ON

T8011SECQE-H

T8011SEBQE-H

T8011A

ON

none

(ON)

T8011ASECQE-H

T8011ASEBQE-H

T8012

ON

none

ON

T8012SECQE-H

T8012SEBQE-H

T8012A

(ON)

OFF

(ON)

T8012ASECQE-H

T8012ASEBQE-H

T8012B

ON

OFF

(ON)

T8012BSECQE-H

T8012BSEBQE-H

Term Comm.

2-3, 5-6

open

2-1, 5-4

3 Way Switches (SP3T) T812

ON

ON

ON

T812SECQE-H

T812SEBQE-H

(ON)

ON

(ON)

T812ASECQE-H

T812ASEBQE-H

ON

ON

(ON)

T812BSECQE-H

T812BSEBQE-H

T812B

.030 0.76 .185 4.70

2 Comm

Dimensions (mm)

Model No.

.415 10.54 .571 14.50

.350 8.89

.410 10.41

3

ON

none

ON

5 Comm 6

4

7

8 7

.060 1.52

6 5 4

9

Switching Position

3 5 Comm 2 6 7

6 9 2 Comm 5 8 3 4

11

8 Comm

PCB Type

Solder Type T8401SEBQE-H

none

(ON)

T8403SECQE-H

T8403SEBQE-H

ON

none

ON

T8405SECQE-H

T8405SEBQE-H

T8407

(ON)

OFF

(ON)

T8407SECQE-H

T8407SEBQE-H

T8409

ON

OFF

(ON)

T8409SECQE-H

T8409SEBQE-H

Term Comm.

2-3, 5-6, 8-9, 11-12

open

2-1, 5-4, 8-7, 11-10

4

8 Comm 9

10

11 12

T845SEBQE-H

3 Way Switches (DP3T) T845

ON

ON

ON

T845SECQE-H

T847

(ON)

ON

(ON)

T847SECQE-H

T847SEBQE-H

T849

ON

ON

(ON)

T849SECQE-H

T849SEBQE-H

Term Comm.

2-3, 5-6, 2-3, 5-4, 2-1, 5-4, 8-7, 8-9, 11-12 8-9, 11-10 11-10

DPDT Right Angle 4.70

A

7.31

3

5

1

2

6 KEYWAY THIS SIDE 3

1.27 12.70

12.70

3.81

SWITCH SUPPORT 11.43

2 Comm 1

4

4

5 Comm 6

2.69

3.17 0.76

Model No.

.650 16.51

Switching Position

Manf. Part No. PCB Type

T8021

ON

none

ON

T8021TNQE-H

T8021A

ON

none

(ON)

T8021ATNQE-H

T8022

ON

none

ON

T8022TNQE-H

T8022A

(ON)

OFF

(ON)

T8022ATNQE-H T8022BTNQE-H

T8022B

ON

OFF

(ON)

Term Comm.

2-3, 5-6

open

2-1, 5-4

T8301

ON

none

ON

T8301SECQE-H

T8301SEBQE-H

ON

none

(ON)

T8303SECQE-H

T8303SEBQE-H

T822

ON

ON

ON

T822TNQE-H

3 Way Switches (SP3T)

T8305

ON

OFF

ON

T8305SECQE-H

T8305SEBQE-H

T822A

(ON)

ON

(ON)

T822ATNQE-H

T8307

(ON)

OFF

(ON)

T8307SECQE-H

T8307SEBQE-H

T822B

ON

ON

(ON)

T822BTNQE-H

T8309

ON

OFF

(ON)

T8309SECQE-H

T8309SEBQE-H

Term Comm.

Term Comm.

2-3, 5-6, 8-9

open

2-1, 5-4, 8-7

Christchurch +64 3 355 4545

Victoria +61 3 9775 4778

2-3, 5-6 2-3, 5-4 2-1, 5-4

Note: (ON) represents momentary ‘ON’.

www.activecomponents.com

7

11 Comm

T8401SECQE-H

1

Manf. Part No. PCB Type Solder Type

Wellington +64 4 915 9500

5

10

12 No. 9Manf. 10 Part

7

T8303

Auckland +64 9 443 9500

6

8

1

4

7

ON

3

.500 12.70

1/4-40UNS

9

11

1.52

T8403

T8021 - TNQ

2

12

.190 4.83

KEYWAY

8 Comm

T8301- SEBQ

9

12

10

T8405

6.86

KEYWAY THIS SIDE

4.70 11 Comm

4.83

5 Comm

A

.115 DIA 2.92ø

25

1

T8401

2-3, 5-6 2-3, 5-4 2-1, 5-4

3PDT

1

14.50 2 Comm

Model No.

4

1.52

Switching 1 3Position 4 6

Dimensions (mm)

T812A

Term Comm.

10.54 8.89

7

14.50

12

4.70

10.41

10

KEYWAY 10.54 THIS SIDE

2.92 ø

1/4-40UNS T8401-SEBQ

2

9

10

Dimensions (mm)

5

8 Comm

7

1

KEYWAY THIS SIDE

8

4.83KEYWAY THIS SIDE

5 Comm

25

EPOXY SEAL

3

0.76

12.70

DPDT

6

1.52

1/4-40UNS

21.59

9

11

2.92 ø 14.50

25

T8013

12

sales@activecomponents.com

NSW +61 2 9893 9400

Over one million electronic components online.

SW-15


toggle switches C&K 7000 Series cont.

SALECOM type T80-T cont. SPDT Right Angle 6.22ø

4.70 A 1

KEYWAY 3 THIS SIDE

2

2.67ø 6.86

A 1.27 12.70 SWITCH SUPPORT 6.86

7.31

12.70 2.69

2 Comm 1

T8019 - TNQ

Switching Position

Model No.

3.17

0.76

3

Manf. Part No. PCB Type

T8019

ON

none

ON

T8019TNQE-H

T8019A

ON

none

(ON)

T8019ATNQE-H

T8020

ON

OFF

ON

T8020TNQE-H

T8020A

(ON)

OFF

(ON)

T8020ATNQE-H T8020BTNQE-H

T8020B

ON

OFF

(ON)

Term Comm.

2-3

open

2-1

3PDT Right Angle .105 DIA 2.67 ø

.050 TYP 1.27

A .270 6.86

.288 7.32

.150 TYP 3.81

.565 14.35

2 Comm 3

7

8

9

4

5

6

1

2

3

.200 5.08

.030 TYP 0.76

T8301P(A)- TNQ

1

.185 TYP 4.70

EPOXY SEAL

A

4

5 Comm 6

7

KEYWAY THIS SIDE

.048 TYP 1.22

Contact rating............................... Electrical life.................................. Contact resistance......................... Insulation resistance...................... Dielectric strength......................... Operating temperature.................

B Contact Material: 0.4VA max.@20V AC or DC max. Q Contact Material: 5 AMPS @120VAC or 28VDC; 2 AMPS @250VAC 7X01 and UX1 models: 100,000 make-and-break cycles at full load. All other models:40,000 cycles Below 10mΩ typ. initial @2-4VDC, 100mA for both silver and gold plated contacts 109Ω min. 1000 Vrms min. @ sea level -30°C to +85°C

Materials Case.............................................. Actuator.......................................... Bushing......................................... Housing......................................... Switch support.............................. End contacts................................. Centre contacts & all terminals...... 1/4-40 UNS-2A 25˚ KEYWAY POS Seal................................. 3 Terminal Hardware...................................... POS 2

Glass filled nylon 6/6, flame retardant, heat stabilised, or diallyl phthalate (DAP) (UL 94V-0) Brass, Chrome Plated Brass or zinc, nickel plated Stainless Steel Brass or steel, tin plated B contact Material: Copper Alloy, with gold plate over nickel plate. Q Contact Material: Coin B Contact Material: Copper Alloy, with gold plate over nickel plate. 3.94 Q Contact Material: Copper alloy, 6.86 0.76 silver plated Epoxy 3 Nut & Locking Ring: Brass, nickel plated 2 12.7 4.70 nickel plated Lockwasher: Steel,

8.89

1/4-40 UNS-2A

.125 3.18

9

Switching Position

Manf. Part No. PCB Type

T8301P(A)

ON

none

ON

T8301P(A)TNQE-H

T8303P(A)

ON

none

(ON)

T8303P(A)TNQE-H T8305P(A)TNQE-H

T8305P(A)

ON

OFF

ON

T8307P(A)

(ON)

OFF

(ON)

T8307P(A)TNQE-H

T8309P(A)

ON

OFF

(ON)

T8309P(A)TNQE-H

Term Comm.

2-3, 5-6, 8-9

open

2-1, 5-4, 8-7

Note: (ON) represents momentary ‘ON’.

C&K 7000 Series -Toggle, Miniature A range of highly reliable, high quality panel mounting miniature toggle switches with solder lug terminations or PCB pins. • SPDT & DPDT Configuration • Low contact resistance

SYZQE Solder

SW-16

Auckland +64 9 443 9500

TERM. WIDTH

3

1

3.94

6.86

0.76

KEYWAY

POS 3

.650 16.51

2.03

2 (COMM)

25˚

3

POS 2

Model No.

EXPOXY SEAL

2.92ø SPDT -Gold Plated (B 10.67 Contact 8.89 Material) .500 12.70

8 Comm

1

POS 1

2

12.7

4.70

1

POS 1 2.92ø

EXPOXY SEAL 10.67

8.89

2 (COMM) 8.89

7101SYZBE

Switch Function (Keyway) Model No. Pos. 1

Pos. 2

Pos. 3

2.03 TERM. WIDTH

3

1

Manf. Part No. PCB Type

Solder Type

7101

ON

none

ON

7101SYCBE

7101SYZBE

7103

ON

OFF

ON

7103SYCBE

7103SYZBE

7105

(ON)

OFF

(ON)

7105SYCBE

7105SYZBE

7107

ON

OFF

(ON)

7107SYCBE

7107SYZBE

7108

ON

none

(ON)

7108SYCBE

7108SYZBE

Term Comm.

2-3

open

2-1

SYCQE PCB

Wellington +64 4 915 9500

www.activecomponents.com

Christchurch +64 3 355 4545 sales@activecomponents.com

Victoria +61 3 9775 4778

NSW +61 2 9893 9400

Over one million electronic components online.


toggle / slide switches SALeCOm TyPe T80-S

C&K 7000 SeRIeS CONT.

-Slide

SPDT -Silver Plated (Q Contact Material) Switch Function (Keyway)

manf. Part No.

model No.

A

Pos. 1

3.94 7101 0.76 7103

1.53

Pos. 2

7105

(ON) 6 7107 ON 12.7 5 7108 ON 4.70 4 Term Comm. 2-3 2.03 EXPOXY SEAL

8.89 8.89

PCB Type

Solder Type

7101SYCQE

7101SYZQE

Pos. 3

none 4.83ON

ON 1.02 ON

E 123142

OFF

ON

7103SYCQE

7103SYZQE

OFF

(ON)

7105SYCQE

7105SYZQE

3

OFF

2

none

1

open

(ON)

7107SYCQE

7107SYZQE

(ON)

7108SYCQE

7108SYZQE

Contact rating ............................ 5A @125VAC or 28VDC 3A @250VAC Electrical life ............................... 30,000 make-and-break cycles at full load Contact resistance ...................... 10mΩ max. initial @2-4VDC, 100 mA Insulation resistance ................... 1000MΩ min. Dielectric strength ...................... 1500VRMS @ sea level 5.08 Operating temperature .............. -30°C6.10 to +85°C

2-1

materials Case ........................................... Diallyl phthalate (DAP) Slide handle ................................. Nylon 19.56 Housing ..................................... Stainless Steel 17.53 Contact & terminal ..................... Copper Alloy, Silver Plated

11.43

DPDT -Gold Plated (BTERM. Contact Material) WIDTH 2 (COMM) 3

1

5

0.76

3 12.70

2

4.70

1

3.82

6

4

3.94

1/4-40 UNS-2A

1.53

25˚

4.83

0.76

1.02

KEYWAY

POS 3

E 123142

12.7

POS 2 4.70 POS 1

6

3

5

2

4

1

SPDT

2.16 TRAVEL

1

TERM. WIDTH

3.96

TS-13-A1-2-BQ 6.60

2 Comm

5.08

6.10

6.35

3 0.76 3

2.92ø

10.67

EXPOXY SEAL

8.89

701SYZQE

2.03

8.89

Pos. 2

Pos. 3

PCB Type

ON

none

ON

7201SYCBE

7201SYZBE

ON

OFF

ON

7203SYCBE

7203SYZBE

7205

(ON)

OFF

(ON)

7205SYCBE

7205SYZBE

7207

ON

OFF

(ON)

7207SYCBE

7207SYZBE

7208

ON

none

(ON)

7208SYCBE

7208SYZBE

Term Comm.

2-3, 5-6

open

2-1, 5-4

DPDT -Silver Plated (Q Contact Material)

7201

Pos. 1

Pos. 2

Pos. 3

ON

none

ON

manf. Part No. PCB Type

Solder Type

7201SYCQE

7201SYZQE

7203

ON

OFF

ON

7203SYCQE

7203SYZQE

7205

(ON)

OFF

(ON)

7205SYCQE

7205SYZQE

7107

ON

OFF

(ON)

7207SYCQE

7207SYZQE

7208SYCQE

7208SYZQE

7208

ON

none

(ON)

Term Comm.

2-3, 5-6

open

2-1, 5-4

2.16 TRAVEL

6.35

1

3.96

Switch position

manf. Part No. PCB Type

TS-13

ON

none

ON

TS13A12CQE-H

TS13A12BQE-H

(ON)

none

ON

TS13AA12CQE-H

TS13AA12BQE-H

TS-14

ON

OFF

ON

TS14A12CQE-H

TS14A12BQE-H

Term Comm.

2-3

open

2-1

SPDT RIGHT ANGLe

4.72 4.72

3.18

www.activecomponents.com

sales@activecomponents.com

3.18

EPOXY SEAL

12.70 0.76

0.76 4.70

1.17 2 Comm

1

1.27 0.36

9.53

TS-13P-A1-2-Q(-E)

3

1

3.86

24.70

1.17 2 Comm

3 13.21

Solder Type

TS-13P

ON

none

ON

TS13PA12QE-H

TS13PA12QE-H

TS-13APA

(ON)

none

ON

TS13PAA12QE-H

TS13PAA12QE-H

TS14PA12QE-H

TS14PA12QE-H

TS-14P

ON

OFF

ON

2-3

open

2-1

Victoria +61 3 9775 4778

9.53

2.69 TS-13P-A1-2-Q(-E

manf. Part No. PCB Type

Term Comm.

EP

6.60 3

1

3.86

Switch position

Christchurch +64 3 355 4545

Solder Type

TS-13A

model No.

Wellington +64 4 915 9500

2.03

3

model No.

Note: (ON) represents momentary ‘ON’. Right angle mount and many other variations also available.

Auckland +64 9 443 9500

TERM. WIDTH

TS-13-A1-2-BQ

2 Comm

Solder Type

7201

model No.

1

3.82

5

7203

Switch Function (Keyway)

2

4.70

3 manf. 4Part No. 6

1

model No. Pos. 1

12.70

17.53

19.56

TERM. WIDTH 2 (COMM)

Switch Function (Keyway)

11.43

NSW +61 2 9893 9400

Over one million electronic components online.

SW-17


25 °

3

3 23.80

29.36 2

12.70

slide / rocKer switches

1 9.40

3.51 6.99 SALeCOm TyPe T80-R CONT.

SALeCOm TyPe T80-S CONT. DPDT

SPDT 11.43

5.08

7.62

1.52

2 Comm 1

0.76

3

4

5 Comm

2 Comm 1

6

2.03 TERM. WIDTH

3 0.76

25 °

5

2.16 17.53

4

23.80

29.36 2

3.96

none

ON

TS-12

ON

OFF

ON

2-3, 5-6

open

2-1, 5-4

3.06 3.86 4.70

5 6 3 1.22 1 0.36 2 3.81

2 Comm 4

3

4

6

12.70

11.43

TS-11P-A1-2-Q(-E) 1.22

0.36

12.70

3.81

R8015

ON

none

ON

R8015A

ON

none

(ON)

R8015R112BQE-H

R8016

ON

OFF

ON

(ON)

OFF

(ON)

R8016AR112CQE-H R8016AR112BQE-H

R8016B

ON

OFF

(ON)

R8016BR112CQE-H R8016BR112BQE-H

2-3

open

2-1

11.43Term Comm.

R8016R112CQE-H

R8016R112BQE-H

SALeCOm TyPe JS-606

2.69 13.21

-Rocker, Power 21.0

2.69

15.0 9.8

13.21

TS-11P-A1-2-Q(-E)

5 Comm 6

R8015R112CQE-H

R8015AR112CQE-H R8015AR112BQE-H

R8016A

12.5

1

3.06 1.17 4.70 2 Comm 5 Comm

1.17

1

5 6 3 2

manf. Part No. PCB Type Solder Type

3

Switch position

model No.

24.8

0.76

3

4

3.86 0.76

1

12.70

EPOXY SEAL

3.80

1

12.70 4

4.72

6.86

0.61

Position 2Switching Comm

model No.

TS12A12BQE-H

EPOXY SEAL

3.94

R8015 - R11-2-BQ

TS11A12BQE-H

TS12A12CQE-H

4.72

DPDT RIGHT ANGLe

Solder Type

TS11A12CQE-H

Term Comm.

3.51

6.99

2.0

PCB Type ON

9.40

manf. Part No.

2 1

4.83

model No.

Dimensions (mm) 3.80

12.70 4.70

1

3

6

Switch position

TS-11

3

3

4.70

3.82

TS-11-A1-2-BQ

6.86

0.61

6 12.70 19.56

3.94

R8015 - R11-2-BQ 2.39ø

manf. Part No. PCB Type

0.8 7.1

TS-11P

ON

none

ON

TS11PA12QE-H

TS-12P

ON

OFF

ON

TS12PA12QE-H

Term Comm.

2-3, 5-6

open

2-1, 5-4

4.7

Dimensions (mm)

13.0

Note: (ON) represents momentary ‘ON’.

SALeCOm TyPe T80-R

1

-Rocker, Miniature

2

3

4

5

6

7

8

9

10

11

12

13

14

H L

I I

15

16

Please contact us for details on the other models, colours, stamps and ratings available.

Many other rocker variations are available. E 123142

E 123142

Contact rating ............................ 5A @125VAC or 28VDC (Q Terminal) Electrical life ............................... 50,000 make-and-break cycles at full load Contact resistance ...................... 10mΩ max. initial @2-4VDC, 100 mA Insulation resistance ................... 1000MΩ min. Dielectric strength ...................... 1500VRMS @ sea level Operating temperature .............. -30°C to +85°C

materials Case ........................................... Diallyl phthalate (DAP) Actuator ..................................... ABS, Black standard Housing ...................................... Stainless Steel Frame .......................................... Nylon (UL 94V-0), Black Bushing ..................................... Copper alloy or zinc, nickel plated Contact & terminal ..................... Copper Alloy, Silver Plated

SW-18

Auckland +64 9 443 9500

Wellington +64 4 915 9500

www.activecomponents.com

Christchurch +64 3 355 4545 sales@activecomponents.com

2

4.70

1

Victoria +61 3 9775 4778

NSW +61 2 9893 9400

Over one million electronic components online.


1.52

6

3 29.36 2 1

23.80

1.02

0.76

25 °

12.70 4.70 9.40

4

rocKer / push Button switches

1

3.94

SALeCOm TyPe JS-606 0.61 CONT. 6.99

SALeCOm TyPe R18

2.03

3.51

DPDT

3

5 2

R8017 - R11-2-BQ 2.39ø 2Comm 1

3 1.52

4

23.80

6 1.02

6

3 29.36 2 1

3A 125V AC

4.83

5 Comm 0.76

25 °

12.70 4.70

CONT.

-Push Button

11.43

4

3

5 2

1

Dimensions (mm) 5.8 1

Type

manf. Part No.

OFF-ON

R18-21A3-H

OFF-(ON)

R18-21B3-H

ON-(OFF)

R18-21C3-H

2.41

3 6 .5 8 14.15 7.4

10.2

9.40

6.99 Dimensions (mm)

2.03

0.61

3.51

11.43

3A 125V AC

Dimensions (mm) 4.6

R8017 - R11-2-BQ 2manf. 5 Comm CommPart No.

Switching Position

model No.

1 Type 3 4 PCB

6 Solder Type

R8017

ON

none

ON

R8017R112CQE-H

R8017A

ON

none

(ON)

R8017AR112CQE-H R8017AR112BQE-H

R8018

ON

OFF

ON

R8018R112CQE-H

R8018A

(ON)

OFF

(ON)

R8018AR112CQE-H R8018AR112BQE-H R8018BR112CQE-H R8018BR112BQE-H

R8018B

ON

OFF

(ON)

Term Comm.

2-3, 5-6

open

2-1, 5-4

R8017R112BQE-H

Type

manf. Part No.

OFF-ON

R18-24A3-H

OFF-(ON)

R18-24B3-H

3 5 5.6

• Indicator version available • Black rocker/ housing Rating......................................... 10A 125VAC/ 6A 250VAC (UL-KEMA) Contact resistance ...................... 30mΩ (max). Insulation resistance ................... DC 500V 100MΩ (min). Dielectric strength ...................... 1000VAC/ 1 minute

M11.65

manf. Part No.

I/O making

JS606AQBB3-H

3P ON-OFF

I/II marking

JS606BQBB14-H

3P ON-OFF-ON

I/O/II marking

JS606CQBB6-H

2P (ON)-OFF

No marking

JS606DQBB1-H

2P ON-(OFF)

No marking

JS606EQBB1

3P (ON)-ON

No marking

JS606FQBB1-H

2P INDICATOR

Green Indicator

JS606IQGB1-H

2P INDICATOR

Red Indicator

JS606IQRB1-H

Note: (ON) represents momentary ‘ON’.

SALeCOm TyPe R18

13.8

3A 125V AC

Dimensions (mm)

Type

manf. Part No.

OFF-ON

R18-26A5-H

OFF-(ON)

R18-26B5-H

5.6

4.6 3 5

9

M11.65

15.2 13.8

5.6

20.2

3.5

Dimensions (mm)

Type

manf. Part No.

OFF-ON

R18-23A3-H

OFF-(ON)

R18-23B3-H

ON-(OFF)

R18-23C3-H

5.6

4.6 3 5

9

30mΩ max. DC 500V 100MΩ min. AC 1000V 1 minute 30,000 cycles min 50,000 cycles min

Christchurch +64 3 355 4545 sales@activecomponents.com

6.5

10.5 4.8 M11.65

11 15.5 13.8

5.6

3.5

38.4

3A 125V AC

Dimensions (mm)

4.6

Type

manf. Part No.

OFF-ON

R18-25A5-H

OFF-(ON)

R18-25B5-H

ON-(OFF)

R18-25C5-H

3 5

9

6.5

12 19

10.5 4.8 M11.65

13.8

5.6

38.4

Wellington +64 4 915 9500

6.5

4.8

10.5

3A 125V AC

3.5

Dimensions (mm) 12.80 11.00

10.6

8.8 13.9 2 4

www.activecomponents.com

3.5 38.4

-Push Button

Auckland +64 9 443 9500

15.5 11

5.6

3A 125V AC

2P ON-OFF

Contact resistance ............................. Insulation resistance .......................... Dielectric strength ............................. Electrical life ...................................... Mechanical life ..................................

6.5

38.4

materials Housing ...................................... Nylon #66 (UL 94V-2) Rocker ......................................... Nylon #66 (UL 94V-2) Contactor .................................. AgCdO alloy Spring......................................... Music Wire

Feature

9

10.5 4.8

R8018R112BQE-H

Note: (ON) represents momentary ‘ON’.

Circuit

4.7 10.2

3.94

Type

manf. Part No.

ON-OFF

R18-27C3-H

Victoria +61 3 9775 4778

SW-19

23.5

12

8.8 13.9

NSW +61 2 9893 9400

Over one million electronic components online.

P

5.4


push Button / pieZo switches SALeCOm TyPe R18 CONT. 1A 125V AC

Dimensions (mm) 8 11.00

13.00

OFF-(ON)

R18-28A5-H

Design excellence and engineering expertise is the basis of EAO’s global reputation. A spectacular range of ready-to-use solutions are available:

8.8 13.9 1.2

manf. Part No.

P

11.95 3.7 17.9

3.02

Type

eAO HumAN INTeRFACe PRODuCTS AND SOLuTIONS

8.8 13.9

10.6 4.8

1A 125V AC

6.8

1.45

• • • • • •

Push button switches Indicators/pilot lights Emergency stop switches Vandal resistant keypads/controls Ip67 rated switches Touch sensitive rated switches

Dimensions (mm)

4.8 2 0.

manf. Part No.

OFF-(ON)

R18-29A3-H

ON-OFF

R18-29C3-H

5.8

27.6 10.3

6

4

9.5 7

3.5

1A 125V AC

Dimensions (mm) 13.9 8.8

OFF-ON

R18-27A3-H

ON-(OFF)

R18-27B3-H

17.9

manf. Part No. 6.7

Type

3 10.6

11.95

1A 125V AC

7.00 6.00

4.80 2.00

Type

13.9 8.8

3.7

11.00

P

13.00

M7*P0.75

Type

M7*0.75

Dimensions (mm)

Please ask us for an EAO product catalogue. 2.20 12.60

manf. Part No. 9.80

ON-(OFF)

R18-29B3-H

28.40

RW COmPONeNTS PIeZOeLeCTIRC SWITCHeS

0.40 3.90 9.50

SmA1 PIeZO PuLSe -Momentary Push Button Dimensions (mm)

ø28 3

19

manf. Part No.

SW-20

Red

SMA1-B-EW-1-R

Green

SMA1-B-EW-1-G

Switching voltage max. ..................... Switching current max....................... Material ............................................. IP protection...................................... Operating temperature ..................... Electrical connection .........................

One of the most rugged range of switches available today, and affordable. Some of the switches have dual ring illumination for visual feedback in a variety of colors (standard - red/green) or piezoelectric buzzer can be incorporated for audio feedback if desired. Standard sizes are 18mm 19mm and 22mm. Piezoelectric switches do not require an external power source.

ø20.7 22.5

24V AC/DC 200mA Aluminium/ Stainless Steel IP69 -40°C to +125°C Wires

Auckland +64 9 443 9500

Wellington +64 4 915 9500

www.activecomponents.com

For more info on ordering RW Piezo Switches, please contact us.

Christchurch +64 3 355 4545 sales@activecomponents.com

Victoria +61 3 9775 4778

NSW +61 2 9893 9400

Over one million electronic components online.


tilt / micro swtiches COmuS Cm SeRIeS

PATTeRSON mICRO SWITCHeS uLTRAmINIATuRe 2 AmP

-Mercury Tilt Switches

Cm1000-70 Differential angle............................... Switching voltage .............................. Switching current .............................. Size ................................................... Contact resistance ............................. 1 Electrode ........................................

10 Deg max 240Vac max 5.0A at 240Vac L: 38.0mm Dia: 11.0mm 3 ohms max. High Power

• • • • • •

6.5H x12.8W x5.8Dmm 2A Rated PCB Terminals standard 0.2” PCB pitch 30,000 operations (electrical) Stainless steel lever

Cm1320-0 Differential angle............................... Switching voltage .............................. Switching current .............................. Size ................................................... Contact resistance ............................. 2 Electrodes ......................................

10 Deg max 240Vac max 0.2A at 240Vac /0.25A at 120Vac L: 10.2mm Dia: 4.7mm 1 ohms max. General Purpose

Cm1600-0 Differential angle............................... Switching voltage .............................. Switching current .............................. Size ................................................... Contact resistance ............................. 1 Electrode ........................................

2 Deg max 24Vdc 0.15A L: 5.6mm Dia: 3.6mm 5 Ohms max. Miniature

Cm1300-0 Differential angle............................... Switching voltage .............................. Switching current .............................. Size ................................................... Contact resistance ............................. 1 Electrode ........................................

10 Deg max 240Vac max 0.3A at 240Vac /0.5A at 120Vac L: 10.2mm Dia: 4.7mm 3 ohms max. General Purpose

Lever Length “A”

Voltage

Resistive Load

manf. Part No.

No Lever 13mm

AC 125V

3A

V421558

DC 30V

2A

V421559

SuBmINIATuRe 1 AND 3 AmP SWITCH • 10.24H x 19.8W x 5.8Dmm • PCB terminals standard, other terminations available • Range of actuator styles available • Contact resistance 30mΩ max. • 200,000 operations (electrical)

A

10.2 C 9.5 8.8

Lever Length “A”

manf. Part No.

No Lever

V422006**

17mm

V421386

25mm

V421387

40mm

V421388

17mm

V421389*

* with solder terminal ** 1A/125V AC rated

Non-inductive Load

Operating angle ................................ Switching voltage .............................. Switching current .............................. Size ................................................... Standard switch.................................

45±15 Deg max 240Vac max 0.4A at 240Vac/1.0A at 120Vac L: 9.7mm Dia: 8.2mm Normally Closed Contact

7.3 No

19.8 Stainless steel lever

Voltage

Cm1490-1

Resistive Load

Inductive Load PF=0.4

Lamp Load

Inductive Load

motor Load

AC125V

5A

0.7A

3A

1.3

AC250V

3A

0.5A

2A

0.8

DC8V

5A

2A

4A

3A

DC30V

4A

2A

3A

3A

DC125V

0.4A

0.05A

0.4A

0.05A

DC250V

0.2A

0.03A

0.2A

0.03A

STANDARD 15 AmP SWITCH

Cm4150-1 Contact resistance ............................. Switching voltage .............................. Switching current .............................. Size ................................................... Operate angle ................................... Joystick control..................................

3 Ohms max 120Vac 1.0A L: 23.5mm Dia: 10.7mm 4°±1° Normally Open Contact

Dimensions (mm)

A

A

8.1

8.1 Nc 10.3 ±0.1

15.9

Nc 10.3 ±0.1

15.9

No 22.2

Auckland +64 9 443 9500

Nc

No

Wellington +64 4 915 9500

www.activecomponents.com

Christchurch +64 3 355 4545 sales@activecomponents.com

No

c

22.2

c

27.8

27.8

Stainless steel lever

Stainless steel roller

Victoria +61 3 9775 4778

NSW +61 2 9893 9400

Over one million electronic components online.

SW-21


micro switches / Thermistors PATTERSON Micro Switches cont. • • • • • •

NTC Thermistors -Screw Mount

-

V421379

No Lever

-

V421381*

28mm

-

V421380

52mm

-

V421382

52mm

-

V421378**

Manf. Part No.

-

V421383

12mm

V421384**

26mm

V421385

* Low Operating Force ** with 4,8mm QC tabs

Non-inductive Load

Inductive Load

Motor Load 4A

AC125V

15A

3A

10A

AC250V

15A

2A

10A

3A

DC8V

15A

4A

10A

6A

DC30V

10A

4A

10A

4A

DC125V

0.6A

0.1A

0.6A

0.1A

DC250V

0.3A

0.05A

0.3A

0.05A

PTC Thermistors -SMD

SMD 1.25

0.8 Dimensions (mm)

Max operating voltage.............................. 25Vdc (TA=0 to 40°C) Rated resistance........................................ ≤1kΩ Threshold temperature tolerance ΔT......... ±5°C R (TNTT-ΔT) R (TNTT+ΔT) (kΩ) (kΩ)

R (TNTT+15K) (kΩ)

Manf. Part No.

70

≤5.7

≥5.7

≥40*

B59701A70A62

90

≤5.5

≥13.3

≥40

B59701A90A62

100

≤5.5

Max power at 25°C................................... Resistance tolerance.................................. Beta value tolerance.................................. Dissipation factor...................................... Test voltage............................................... Climatic category (IEC60068-1)................. Resistance at 25°C (Ω)

≥13.3

≥40

B59701A100A62

110

≤5.5

≥13.3

≥40

B59701A110A62

120

≤5.5

≥13.3

≥40

B59701A120A62

130

≤5.5

≥13.3

≥40

B59701A130A62

* T NTT+25K

SW-22

Auckland +64 9 443 9500

• Easy mounting • High accuracy • Ideal for temperature sensing 150mW ±2% at 25°C ±1°C 2.6mW/°C 1kVac for 1 sec. 55/125/56

Beta Value 25°C to 100°C (K)

Manf. Part No. B57703M502G40

5K

3988

10K

3988

B57703M103G40

30K

3964

B57703M303G40

NTC Thermistors -SMD SMD • • • •

Dimensions (mm) Excellent stability Ideal for temperature sensing Resistance tolerance 5% D Suitable for wave & reflow soldering

B

A C

2.0

0.75 max. 0.5 min.

Threshold Temp. TNTT±ΔT (°C)

Dimensions (mm)

• Probe assembly package • Negative temperature coefficient (ntc) • Good thermal coupling via metal tag

Inductive Load PF=0.4

Lamp Load

• Ideal for limit temperature sensing • Fast & reliable response • Suitable for reflow soldering

8.5

ø3.7

No Lever

Resistive Load

ø0.5 10.0

Lever Length “A”

Voltage

6.0

45

6.5

Roller Lever Length “A1”

62mm

17.5

0.5

6.3mm QC Terminals standard 15A at 250VAC Contact resistance 15mΩ max. 100,000 operations (electrical) 4.8mm Terminals also available Different contact capabilities available

Wellington +64 4 915 9500

www.activecomponents.com

Max power at 25°C............................ Resistance tolerance........................... Beta value tolerance........................... Dissipation factor............................... Climatic category (IEC60068-1)..........

Size

A

0402 - 150mW 0603 - 180mW 0805 - 210mW ±5% at 25°C ±3% 0402 - 2.5mW/°C 0603 - 3.0mW/°C 0805 - 3.5mW/°C 55/125/56

B

C max.

D

0402

1.0

0.5

0.6

0.25

0603

1.6

0.8

0.9

0.35

0805

2.0

1.25

1.3

0.5

R25 (Ω)

B25/50 (K)

B25/85 (K)

B25/100 (K)

Size

Manf. Part No.

10000

3940

3980

4000

0402

B57221V2103J60

220

3470

3540

3550

0603

B57311V2221J60

220

3500

3540

3550

0603

B57311V2221K60

10000

3940

3980

4000

0603

B57321V2103J60

220

3470

3540

3550

0805

B57411V2221J62

330

3470

3540

3550

0805

B57411V2331J62

10000

3940

3980

4000

0805

B57421V2103J62

Christchurch +64 3 355 4545 sales@activecomponents.com

Victoria +61 3 9775 4778

NSW +61 2 9893 9400

Over one million electronic components online.


thermistors / silicone Keypads NTC THeRmISTORS -Inrush Limiting

Resistance at 25°C (Ω)

Dimensions (mm)

Beta Value 25°C to 100°C (K)

manf. Part No.

16mm DISC T

Dia.

P

36

ød

H

• Inrush limiting • Suitable for use up to 265Vrms

Max power at 25°C .................................. B57235 - 1.8W B57236 - 2.1W B57237 - 3.1W B57238 - 3.9W Resistance tolerance ................................. ±20% at 25°C Beta value tolerance ................................. ±3% Dissipation factor ..................................... B57235 - 9mW/°C B57236 - 10mW/°C B57237 - 17mW/°C B57238 - 20mW/°C Climatic category (IEC60068-1) ................ 55/170/56

Type

Imax 0°C to 65°C (A)

Dia

T

P

ød

8.4

1202

B57238S259M

3

7.4

2900

B57238S309M

4.7

6.6

2965

B57238S479M

5

6.4

2965

B57238S509M

7

6.0

2965

B57238S709M

8

5.5

3065

B57238S809M

10

5.0

3065

B57238S100M

15

4.4

3165

B57238S150M

16

4.0

3165

B57238S160M

22

4.0

3265

B57238S220M

25

3.4

3265

B57238S250M

FIGARO GAS SeNSORS Using innovative gas sensing technologies, Figaro Engineering provides cost-effective gas sensing solutions globally. FIgaro’s gas sensors can be used in a wide range of applications in the fields such as:

H

B57235

9.5

6

5

0.6

14

B57236

11.5

6

5

0.6

16

B57237

15

7

7.5

0.8

22

B57238

16

7

7.5

1.0

23

Resistance at 25°C (Ω)

2.5

Imax 0°C to 65°C (A)

Beta Value 25°C to 100°C (K)

manf. Part No.

5

4.2

2800

B57235S509M

6

4.0

2800

B57235S609M

8

3.5

2900

B57235S809M

10

3.0

2900

B57235S100M

9.5mm DISC

11.5mm DISC 2.5

5.5

2700

B57236S259M

5

4.5

2800

B57236S509M

10

3.5

2900

B57236S100M

12

3.2

2900

B57236S120M

16

2.9

2965

B57236S160M

20

2.8

3065

B57236S200M

25

2.5

3065

B57236S250M

50

1.9

3165

B57236S500M

80

1.6

3300

B57236S259M

• Automotive - Cabin air quality - Air purifier - LPG alarm for RV - Breath alcohol tester - Gas driven car • Industrial Health and Safety - Combustible gas detector - Toxic gas detector - Refrigerant leak detector - Oxygen Monitor

• Appliance Control - Microwave oven - Air Purifier - Range hood • Domestic Safety - Gas alarm - CO alarm - Gas boiler safety switch • Air quality control - Air purifier - Air conditioner - Ventilation control

Evaluation boards and test units are also available:

15mm DISC 1

9.0

2700

B57237S109M

2.2

7.0

2800

B57237S229M

2.5

6.5

2800

B57237S259M

4.7

5.1

2900

B57237S479M

5

5.0

2900

B57237S509M

7

4.2

3060

B57237S709M

10

3.7

3060

B57237S100M

15

3.0

3000

B57237S150M

22

2.8

3300

B57237S220M

33

2.5

3300

B57237S330M

Auckland +64 9 443 9500

Wellington +64 4 915 9500

www.activecomponents.com

Christchurch +64 3 355 4545 sales@activecomponents.com

For more information about ordering Figaro Sensors, please contact us.

SW-23

Victoria +61 3 9775 4778

NSW +61 2 9893 9400

Over one million electronic components online.


contactless sensors CONTACTLeSS SeNSORS • Custom non- contacting angle sensing • Ideal in harsh environments • Through hole and sector sensing solutions • Robust 360° contactless feedback • Ideal for Off-Highway, Construction, Agriculture, Marine, Medical and Automotive applications

The technology used by Piher is only sensitive to the flux density coplanar with the IC surface. This allows to decode the absolute rotary (angular) position from 0 to 360 degrees. It enables the design of high performance non-contacting rotary position sensors for both automotive and industrial applications without the limitations of potentiometric solutions (wear, electrical angle...).

In combination with the appropriate signal processing, the magnetic flux density of a small magnet (diametral magnetisation) rotating above the IC can be measured in a non-contacting way. The angular information is computed from both vectorial components of the flux density (i.e. BX and BY). Then an output signal proportional to the decoded angle is produced. The output is selectable between Analog, PWM and Serial Protocol. A configurable switch output is integrated within the sensor too.

Working principle Measurement of angular position using variation of magnetic field amplitude induced by the displacement of a moving magnet has been intensively developed over the last fifteen years. However, these solutions have limits in terms of angular range and temperature influence.

mTS-360 THROuGH SHAFT mINIATuRe CONTACTLeSS SeNSOR The MTS-360 provides a true breakthrough in contactless sensor technology by combining a through-shaft design with 360° absolute position feedback in an ultra miniature size. The result is the smallest fully featured rotary sensor on the market with reliability up to 50 million cycles. With its tiny size of only 6mm x 17mm x 18mm (HxWxL), engineers can now integrate a fully featured rotary sensor directly on their PCB without the packaging issues that typically accompany encoders or other absolute position devices. The exceptionally low profile fits easily in places that were previously too small for pre-packaged rotary sensors.

The new device offers electrical angles up to 360° with no dead band and linearity as low as ±0.5%. Rated for use at -40°C to +150°C, the sensor can be programmed with full scale output with angles shorter than 360 degrees. Output is selectable between Analog, PWM up to 12 bits or Serial Protocol (SPI) up to 14 bits and includes a second output channel to provide a programmable switch signal. A redundant version with a dual core sensor in the same package is also available.

The MTS-360 relies on patented Hall effect technology to enable for the first time true non-contacting through hole shaft sensing using standard SMD features. The offset through-hole accommodates the vacuum pick up tool, allowing use in automated SMD assembly systems. The standard model features a 4mm double D-flat shaft and an (8) pad SMD footprint that is compatible in most reflow soldering systems.

This ultra-miniature MTS-360 Rotary Position Sensor is ideal in optical image stabilisation and precision biomedical devices, optical zoom devices, consumer electronics, instrumentation, HVAC systems, automotive control systems, marine controls, fork lift trucks, farm equipment, cranes, low speed motor feedback, valve position sensors and robotic and automation feedback system.

end of shaft

Hollow shaft

PSC360

PSC360u

PST360

mTS360

Output

Analog (ratiometric), PWM, SPI

Analog (ratiometric), PWM, SPI

Analog (ratiometric), PWM, SPI

Analog (ratiometric), PWM, SPI

Resolution*

Analog/PWM: 12 bits Serial (SPI): 14 bits

Analog/PWM: 12 bits Serial (SPI): 14 bits

Analog/PWM: 12 bits Serial (SPI): 14 bits

Analog/PWM: 12 bits Serial (SPI): 14 bits

Linearity

±1% absolute (0.5% on request)

±1% absolute (0.5% on request)

±1% absolute (0.5% on request)

±1% absolute (0.5% on request)

Supply voltage

5V ± 10%*

5V ± 10%*

5V ± 10%*

5V ± 10%

Supply current

Typ 8.5mA for single version. Typ 17mA for redundant version

Typ 8.5mA for single version. Typ 17mA for redundant version

Typ 8.5mA for single version. Typ 17mA for redundant version

Typ 8.5mA for single version. Typ 17mA for redundant version

Voltage protection

+10V over voltage protection and -10V reverse voltage protection

+10V over voltage protection and -10V reverse voltage protection

+10V over voltage protection and -10V reverse voltage protection

+20V over voltage protection and -10V reverse voltage protection

Rotational life**

Up to 50M cycles

Up to 50M cycles

Up to 50M cycles

Up to 50M cycles

Switch output

Yes, programmable

Yes, programmable

Yes, programmable

Yes, programmable

Angular range

Up to 360° (no dead band)

Up to 360° (no dead band)

Up to 360° (no dead band)

Up to 360° (no dead band)

Redundancy

Yes

Yes

Yes

Yes

Diameter size

Shaft: 6mm

Shaft: 6.35mm / bushing 8.5mm

Hollow shaft: 100mm max.

Hollow shaft: 4mm

mounting

Flange

Panel Mount

Flange

SMD mount

Sealing***

IP67

IP67****

IP65

1P50

Wellington +64 4 915 9500

Christchurch +64 3 355 4545

SW-24

(*) (**) (***) (****)

Depends on electrical angle and rotational speed Depending on application and mounting others upon request customer to seal the PCB connections Auckland +64 9 443 9500

www.activecomponents.com

sales@activecomponents.com

Victoria +61 3 9775 4778

NSW +61 2 9893 9400

Over one million electronic components online.


photo sensors KINGBRIGHT PHOTO SeNSORS

LIGHT DePeNDANT ReSISTOR (CDS CeLL)

SMD

Highly stable, sensitive cadmium sulphide photoconductive cell with a spectral response similar to that of the human eye. The resistance level falling as the light level rises. Miniature, open frame style.

Various photo sensors based on light reflection or interruption, with the choice of many different packages avaiLable.

Minimum dark resistance ......................... Typ. resistance at 10 lux ........................... Peak spectral response ............................. Maximum voltage rating .......................... Maximum power dissipation .................... Operating temperature range...................

20MΩ 50kΩ-140kΩ 590nm 150Vdc 100mW at 25°C -30°C to +80°C

Dimensions (mm) 34

2.4

Typical Circuit Diagrams: 1

2

4

3

1

5.1 2

3

1

4

1

4

2

3

2

3

1

4

1

4

2

3

2

4

3

3.4 Ø 0.5

4.3

manf. Part No. VAC54

For ordering information, please contact us.

KINGBRIGHT RGB COLOuR SeNSOR

Can’t find what you’re looking for?

2.6 1.7 R 1

5.12

3

4

1

G 1

2

3

4

2

4

4

0.8

0.6

3

4

3

Anode MARK 2

4

B

3

4

Anode

1

2

3

Cathode

Units : mm(inch) Tolerance : ± 0.1(0.004)

1.1

Parameter

Symbol

Condition

min. Typ.

Red

-

630

-

Peak Sensitivity Wave Length

λP

Green

-

560

-

-

470

-

-

0.35

-

Blue Red Light Current

Forward Voltage

Reverse Dark Current

IL

VF

ID

EV=100Lux VR=5V

IF=10mA EV=0Lux

max. unit

Green

-

0.05

-

Blue

-

0.30

-

Red

0.5

-

1.3

Green

0.5

-

1.3

Blue

0.5

-

1.3

-

-

10

VR=5V

nm

Active has an amazing range of switches and sensors not listed here. Contact us today to enquire further.

µA

V

nA

SW-25

Electrical and Optical Characteristics (TA=25ºC Unless Otherwise Specified)

manf. Part No. KPS-5130PD7C

Auckland +64 9 443 9500

Wellington +64 4 915 9500

www.activecomponents.com

Christchurch +64 3 355 4545 sales@activecomponents.com

Victoria +61 3 9775 4778

NSW +61 2 9893 9400

Over one million electronic components online.

Switches and Sensors  

Our contracted Engineering department use systems such as CAD, CAE, CAM, Pro/E, UG 4.0 to make the 2D and 3D files for plastic products and...