ACO H a u s t e c h n i k 0150.24.88
ACO ShowerDrain Design cover of glass or mineral material for shower channels, straight design This installation manual contains important information. It must be handed on to the end user who has to keep it in a safe place!
Glass, grey with white stripes
Glass, black with floral sand-blasting
Scope of supply Glass, chrome-plated
Following elements are included in scope of supply:
General These design covers have to be used exclusively for combination with channel gratings of relevant length. The design covers are available for ACO ShowerDrain shower channels of the following lengths: 700, 800, 900, 1000 and 1200 mm. Design covers of ACO Haustechnik are tested in accordance with DIN EN 1253 and can be used for the load class K3 (loading up to 300 kg) described therein. They consist of «ESG» (tempered safety glass) as per DIN EN 12150.
1. Design cover with plastic legs (premounted)
Thanks to thermic hardening, the mechanic rigidity value is twice or three times as high as that of normal glass. Increased thermal shock resistance, increased impact strength and impingement resistance as well as increased bending strength are the thus particular features of these products.
2. Vacuum cup
Depending on their length, the design covers come with a certain number of plastic legs, premounted at our works:
At a later date, the design cover can be exchanged with another pattern of the range shown above. When ordering, pay attention to correct cover length.
Grating for channel length
Number of premounted plastic legs
700 and 800 mm
900, 1000 and 1200 mm
Tel. +49 (0) 36965 819–0 Fax +49 (0) 36965 819–361
0150.24.88 Assembly Only after assembly of shower channel base body and finishing of floor covering, the design covers of glass or mineral material have to be inserted into the channel. It must be paid attention that the side with the plastic legs points downwards when inserting into the channel body. Disassembly For cleaning of glass grating, put the vacuum cup onto the smooth grating surface (fig.1). Fig. 1
Then, lift vacuum cup with grating carefully. Now, the grating can be taken out the channel (fig.2). For intense cleaning of cover, the plastic legs can be removed. When sticking again together with the design cover it must be observed that cover side bearing the ACO logo points upwards (visible face). The plastic legs must not be slided on, but can simply be clipped on again. In order to guarantee load class K3 as per DIN EN 1253, the distances between the plastic legs must be kept in accordance with below table: Fig. 2
Number of legs
Measurement L1 Measurement L2 Measurement L3 Measurement L4 Measurement L5
for channel length
ACO Passavant GmbH Im Gewerbepark 11c 36457 Stadtlengsfeld Tel. +49 (0) 36965 819–0 Fax +49 (0) 36965 819–361 www.aco-haustechnik.de
The ACO Group. A strong family you can build on.
HT 789/07/2009 - LTC ● Subject no. 0150.24.88 Subject to technical alterations.
For cleaning of design cover, no acidic cleaning agents or limescale removers may be used, but only neutral cleaning agents.
Published on Jun 14, 2011