MR8880-20
MEMORY HiCORDER
Easily capture high voltage to low level signals with an intuitive operating interface CATIII 600V Isolation across all 4 channels lets you directly measure 480V lines safely Durable structure, wide -10 to 50℃ operating temperature range, and tough against shock and vibrations Easy set-up using built-in PRESETS Recorders, Memory Recorders
STANDARD
SPECIFICATIONS Measurement ranges (10 division full scale)
10mV to 100V/div (13 ranges), full scale: 10div High-speed measurement and display of up to 600V AC Low-pass filter: 5/50/500/5k/50kHz Frequency bandwidth DC to 100 kHz, ±3 dB High-speed function: 100us to 100ms/div, 10 ranges Time axis (1 division =100 samples) Real-time function: 10ms to 1 day/div, 22 ranges (Recording interval:100us to 1 min, 19 range) High-speed function (high speed recording) Functions Real-time function (actual time recording) 4 analog +8 logic Number of channels 14bit × 1 M words/ch Memory capacity CF card slot ×1 (PC CARD 9727-9279, 9830, Max.2GB) Data storage USB memory ×1 USB2.0, Printer (PRINTER UNIT MR9000 can be connected) Interface Recording and display 112 mm×18 m, roll type thermal paper, Recording speed: 10 mm/s, 5.7-inch VGA-TFT color LCD (640×480 dots) (1)AC ADAPTER Z1002 (100 to 240 V AC, 50/60Hz) Power supply (2)BATTERY PACK Z1000 (Continuous use 3 hours) (3)LR6 (AA)×8 (Continuous use 40 min, LR6 batteries cannot be used with PRINTER UNIT MR9000) (4)10 to 28V DC (special order cable) 205W×199H×67D mm, 1.66kg (printer detached) Dimensions, mass 303W×199H×67D mm, 2.16kg (printer attached) (including Z1000 ) AC adapter Z1002(1), Alkaline battery box(1), Protector Accessories Z5001(1), Strap(1), USB cable(1), Application Disk (Wave Viewer Wv, Communication Commands table) (1)
MR8880-20 + MR9000
OPTIONS (The MR8880-20 cannot be used alone. Measurement requires optional INPUT CORD or similar peripheral.)
PRINTER UNIT (print size 100 mm width) MR9000 RECORDING PAPER (18m, 10 rolls /1 set) 9234 CONNECTION CORD (600V AC/DC) 9197 CONNECTION CORD (300V AC/DC) L9198 CONNECTION CORD (300V AC/DC) L9217 CONNECTION CORD (Thin Type, attachment clips sold separately) L9790 ALLIGATOR CLIP (Use with 9790) L9790-01 GRABBER CLIP (Use with 9790) 9790-02 CONTACT PIN (Use with 9790) 9790-03 LOGIC PROBE (refer to p.12) 9320-01 LOGIC PROBE (refer to p.12) MR 9321-01 WAVE PROCESSOR 9335 CARRYING CASE C1003 BATTERY PACK (7.2V, 4500 mAh, recharging with the Z1002) Z1000 PC CARD 256MB 9727 PC CARD 512MB 9728 PC CARD 1GB 9729 PC CARD 2GB 9830 CLAMP ON SENSORs (refer to p.46-49) Other common options (refer to p.12)
*Note: An input cord is not supplied with the MR8880-20. Requires the 9197 or L9198 or L9790
14