Issuu on Google+

Aquanova Rising Baths Pre-Installation Instructions 10mm minimum (edge of bath to wall) 45mm

10mm minimum (edge of bath to wall)

Centreline of Bath

Actuator Through Wall - Right Hand Bath 10mm minimum (edge of bath to wall) 45mm

10mm minimum (edge of bath to wall)

Centreline of Bath

Actuator Through Wall - Left Hand Bath

Optional - only needed for whirlpool baths. 20mm IP65 rated cable outlet wired to a 5 amp fused spur at high level outside the bathroom (13 amp fuse for whirlpool). 450mm

Fig. 1

Electrical Connections


Technical Details - All Aquanova baths rise full of water 1550mm

750mm

550mm 585mm

1700mm

400mm

1700mm

Fig. 2

Fig. 3

a

Manifold Dimensions 640 x 110mm b 750mm

1700mm

Fig. 4

Fig. 5

Note: It is the responsibility of the client to determine the location of the bath in relation to the walls adjacent to the bath (a & b) in Fig. 4 Internal tub length Internal tub width Internal tub depth Transfer height (lowest position) Height of lift

1550 550 400 585 350

Fill volume

200 litres

Filling time Raising time

4.2 mins @ 0.5 bar pressure 18 seconds

Lowering time Maximum floor loading

12 seconds 400Kgs (equivalent to 1.56Kg/sq cm)

Electrical Water

24volt battery operation (automatic charging) 22mm steel braided flexible hose with BSP swivel ends

Abacus Healthcare Services Ltd, Unit 1 Millennium Way, High Carr Business Park, Newcastle-under-Lyme, ST5 7XE Tel: 01782 569330 www.abacushealthcare.co.uk P1 / SBAQ1-9 - issue 8 - 01.04.11

Fax: 01782 569349

e-mail: service@abacushealthcare.co.uk


Manifold Actuator Through Wall - Revision 8