Issuu on Google+

COMMITTEE OF TESTING LABORATORIES IEC SYSTEM FOR CONFIRMITY TESTING AND CERTIFICATION OF ELECTRICAL EQUIPMENT

TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC 61095:2000-10, Edition 1.1 Electromechanical contactors for household and similar purposes R=Required by Lab S=May be subcontracted 3PPS=Three Phase Power Supply required Clause 9.2.1.1

Measurement/testing Test of resistance to ageing

9.2.1.2

Test of resistance to humidity

9.2.1.3

Test of resistance to heat

9.2.1.4

Test of resistance to abnormal heat and fire

July 2006

Testing / measuring equipment / material needed Climatic chamber, Forcemeter 5N Climatic chamber (IEC 68-2-3) Dielectric strength test equipment: 2500 Vโˆผ (45 Hz รท 65 Hz) Minimum short circuit current: 0,2 A No over current tripping: < 0,1 A Ball-pressure apparatus Heating cabinet Standard test finger Forcemeter 5 N Glow-wire test apparatus (IEC 695-2-1) Flammability classification test (IEC 707) Hot wire ignition test

1/3

Subcontracting R R

R

R

IEC 61095, ed 1.1


COMMITTEE OF TESTING LABORATORIES IEC SYSTEM FOR CONFIRMITY TESTING AND CERTIFICATION OF ELECTRICAL EQUIPMENT

Clause 9.2.1.5

Measurement/testing Test of resistance to rusting

9.2.1.6 9.2.2 9.2.4

Test of resistance to tracking Test on screws or nuts other than those on terminals Mechanical properties of terminals

9.2.5

Test of resistance to impact

9.2.6 9.3.3.1 9.3.3.2 9.3.3.3 9.3.3.4

Test of durability of marking Operation Operation limits Temperature-rise Dielectric properties

9.3.3.5

Making and breaking capacities

9.3.4

July 2006

Performance under short-circuit conditions

Testing / measuring equipment / material needed Refined petrol 10 % Solution of ammoniumchloride Heating cabinet Apparatus (IEC 112),Solution A Torque-screwdriver: 0,2 Nm to 10 Nm Torque-spanner: 0,2 Nm to 10 Nm Torque-screwdriver: 10 Nm Torque-spanner: 10 Nm Forcemeter: 10 N to 190 N Weight 0,3 kg to 6,8 kg Gauges A und B Test equipment for flexion test Pendulumhammer Sphere test apparatus Water petrol Recorder Oscilloscope Fine Thermocouples (0,2 mm) Impulse voltage generator up to 12 kV (1,2 µs /50 µs) Voltage up to 4 kV∼ (45 Hz – 65 Hz) Oscilloscope Auxiliary switch Load equipment Power supply 1500 A∼, Ue Timer Power supply and load equipment 6000 A∼ I2t - values

2/3

Subcontracting R

R R R

R R R R R R R 3PPS

R 3PPS

IEC 61095, ed 1.1


COMMITTEE OF TESTING LABORATORIES IEC SYSTEM FOR CONFIRMITY TESTING AND CERTIFICATION OF ELECTRICAL EQUIPMENT

Note: The presence of equipment alone does not indicate a satisfactory situation. Assessors must evaluate the equipment design, calibration, uncertainty and documentation to ensure compliance with the directions of the standard. The requirements of ISO Guide 25 regarding validation are applicable, as the tests of this standard are not standardized tests.

July 2006

3/3

IEC 61095, ed 1.1


iec61095_ed11