Issuu on Google+

Ventilation


Performer Series

T

o be a player in today’s international marketplace the modern

pork producer needs a competitive edge. The efficiency of the modern facility depends on many issues of which the efficiency and longevity of ventilation fans are a substantial part. When the design team at AP was given the challenge of developing a new fan line, three points were paramount. Performance, effi-

ciency, and longevity all needed to be maintained while keeping the price as competitive as possible. You will find the Performer Series ventilation fans have met and exceeded the goals set forth in this challenge. The progressive pork producer is the winner, with tremendous air output, extremely low power consumption and a warranty far beyond the competition’s. This package, combined with a very competitive price and AP's reputation for service puts you in a much better position to compete in the world marketplace.

24" fiberglass performer series fan without cone

2

performer series

24" fiberglass performer series fan with cone


heavy duty motors The heart of the Performer Series is the

Performer Series

specially engineered high efficiency fan motor. Unlike most of our competition that uses smaller 48 frame motors, AP uses the much larger 56 frame motor. This enables us to have much higher performance and efficiencies while allowing much cooler motor temperatures on variable speed applications. We have so much confidence in this motor that

propellers

we warranty it for three full years.

Our props are carefully balanced to provide smooth and efficient

motor casing

operation. Constructed of an

The removable plastic cap at the rear

unbelievably strong composite

of the motor houses the internal capacitor

fiberglass blend, these props will

which has been placed there to provide bet-

outlast the competition’s made of

ter aerodynamics and prevent moisture from

plastic, steel, or cast aluminum.

entering through the top. By removing the plastic cap the whole rear of the motor is exposed allowing very easy access to the wiring terminals as opposed to the cramped area of most motors. The 5/8" internal shaft offers the ability to use large bearings. These double sealed ball bearings are of the highest quality and will

fan guard AP's fan guard is made of heavy steel with a baked on powder coat finish.

give many years of trouble free service.

shutters motor mounts Heavy 3/16" all aluminum motor mounts

A wide selection of both plastic and aluminum shutters are available. See page 7.

tend to be much sturdier than the commonly

water driven into it when a fan is running.

1/2

850

CFM/WATT .05" SP

APP-36

CFM .05" SP

Nominal RPM

Even a double sealed bearing can have

Motor H.P.

water slinger

Model #

used thinner stainless steel mount.

Rough Opening Height (in.)

vibration and will never rust. These mounts

Rough Opening Width (in.)

provide a ridged mount to help eliminate

11310 19.6 43 5/8

43 5/8

APP-24

1/3 1140

7120

17.1 35 1/2

35 1/2

The slinger on the motor shaft "tosses" the

APP-18

1/3 1625

4890

11.0 25 1/2

25 1/2

moisture away into the airstream so it never

APP-14

1/4 1625

2710

9.0

19 3/8

19 5/8

APP-12

1/4 1725

16 1/2

17 3/8

gets near the bearing.

Tested with cones by Bess Laboratories, University of Illinois. Performance shown with guards, shutters and optional discharge cones in place.

performer series

3


Belt Drive The belt driven fans offer an automatic belt

belt drive fans

tensioner that provides smooth operation and maintains constant belt tension. Features include easy access for belt removal, fiberglass housing and cone, motor base and mounting hardware. Like all belt drive fiberglass fans, cast iron pulleys and greasable pillow block bearings are standard features.

basic fan Basic fan includes shutter, heavy powder coated guard, all aluminum and stainless steel mounting hardware, and fiberglass housing with lifetime warranty.

belt tightener All AP Performer Series belt drive fans come standard with an automatic belt tightener. ALL BELTS STRETCH, the question is who checks

propellers Props made of a tough composite fiberglass that are warranted for

for slippage? Why spend big money on a high tech fan only to lose that efficiency months later to improperly tightened belts?

a lifetime. The true airfoil design is vital to the overall effectiveness of

motors

the fan.

Only 56 frame TEAO dual voltage motors are used in AP belt drive fans. These motors are specially designed to match the propellers and fan.

Controlled air intake increases flame surface for maximum efficiency.

drive train

belt drive with cone

To characterize our drive train in one word would be "heavy".

Optional discharge cones boosts fanBottom-draw output by as much as 15% design allows while also increasing efficiencies. Made of durable fiberglass the 36" fan for consiscomes in one piece and the 50" modeltent is in easy to ship and assemgasanand air mix ble three pieces.

Drive shafts of 1" material allow for larger cast iron pillow block bearings to be used giving long life. Large pulleys allow for longer belt life and better operation.

Motor H.P.

Propeller RPM

CFM .05" w/ cone

CFM .05" w/o cone

CFM/WATT .05" w/ cone

Rough Opening Height (in.)

Model #

Rough Opening Width (in.)

belt drive fan chart

APP36

1/2

840

11280

9920

19.1

43 5/8 43 5/8

APP50

1

585

23200 20151

22.1

55 1/5 55 1/2

4

belt drive fans performer series

Electronic igniter is encased to protect against heat and damage

Flame rod monitors heat chamber operations

Lo ga


Competitor series fans Optional Quick-Lock Pit fan kit simplifies cleaning and maintenance

CS541-NC Fan without discharge cone

CS241-NC fan with optional CS24-FTU Pit Fan Transition

Features Include: • Durable and aerodynamic fiberglass housings backed by a limited life-time warranty • Optional fiberglass discharge cones resist damage from

snowall and ice ow maintenance, alvanized • construction High efficiency five bladed propellers feature durable fiber reinforced nylon blades Controlled air flow pat-motor • A high efficiency 1/3 HP tern gauge, is directed to keep • Heavy corrosion resistant aluminum motor mount outer walls cooler • Stainless steel hardware Diagnostic • PVC Shutter light flashes if • An optional winter closureoccur panel problems

CS54C-1P Fan with discharge cone

Features Include: • A durable and aerodynamic fiberglass housing and discharge cone backed by a limited life-time warranty. • A high performance stainless steel propeller • A high efficiency 1.75 HP motor in single or three phase • An automatic belt tensioning system • Heavy gauge, corrosion resistant aluminum drive train support • Stainless steel hardware • PVC Shutter • An optional winter closure panel

Gas valve is

24" Competitor protectedSeries Fan against

Model # corrosion HP Phase and radiant heat

CS241-NC 0.33 CS24C1 0.33

Powerful,

1 1

0.05” SP 0.10” SP 0.15” SP Discharge Shutter Cone CFM CFM/W CFM CFM/W CFM CFM/W NO Plastic 5,440 14.3 5,090 13.1 4,680 11.9 YES Plastic 6,160 16.9 5,800 15.4 5,350 13.7

Framed Opening 34.5” W 34.5” T

warm air 54" Competitor Series Fan output

Model #

HP

Phase

CS541-NC 1.75 Bottom-draw1.75 design CS543-NC allows for consistent CS54C1-P 1.75 gas and air mix CS54C3-P 1.75

1 3 1 3

0.05” SP 0.10” SP 0.15” SP Discharge Shutter Cone CFM CFM/W CFM CFM/W CFM CFM/W NO Plastic 25,700 17.40 24,100 15.90 22,400 14.6 NO Plastic YES Plastic 30,000 20.20 28,200 18.30 26,300 16.5 YES Plastic

Framed Opening 58.0” W 60.5” T

competitor series fans

5


Whether winter or summer, your livestock need to have maximum comfort lev-

Specialty fans

els to achieve optimum results. The AP Basket Fan series can aid in the bettering of otherwise marginal environments. Be it high powered cooling, gentle circulation, or something in between, look to AP for the answer in circulation fans.

mini-brutE™ fans

36" Basket fan

Mini-Brute™ 10" ventilation fans are smaller, more energy

Used primarily for cooling, this fan pro-

efficient fans designed for low air require-

duces 11,300 cfm at 0 SP. The plastic orifice

ments, such as in small farrowing

ring increases the throw because the air stream

rooms and hot nurseries.

doesn't spread as quickly as it would with an

Mini-Brute™ fans move

open wire basket. Flexibility in mounting allows

lower volumes of air for less

for the direction of air where needed. AP's 36"

heat loss, use low h.p. motors

basket fan is highly effective in reducing heat

and are reasonably priced which makes

stress, therefore increasing rate of gain and feed

them very cost effective. They deliver more precise amounts of

conversion putting more money in the pocket of the producer.

air under windy conditions than their larger counterparts.

24" Basket fan

pump out pit & duct fans

The AP 24" basket fan is designed for year round use.

There’s a simple, sensible and

This unit is often run slowly in

inexpensive means of ventilating

the winter time to reduce heat

pits. Virtually all liquid manure stor-

stratification and "dead spots". In

age pits are equipped with pump

the summer time, it serves as a

out ports. For pump outs that do

high velocity cooling fan. With a vinyl coated guard, high efficiency motor and nearly 8,000 cfm of circulation, this is one of the best tur-

40

40

DF-10

Rough Opening Height (in.)

10810 9258 17.1

Rough Opening Width (in.)

GPP-3650 36 1/2

MB-10 10 1/6 3400

CFM/WATT .05" SP

22 1/4 22 1/4 28 1/2 28 3/4

917

886 846 5.5 11 1/4 11 1/4

CFM .1" SP

9.4 9.4

CFM .05" SP

3201 5028

CFM 0" SP

3435 5324

Nominal RPM

GPP-1833 18 1/3 1725

Motor H.P.

18 5/8 18 5/8

Propeller Diameter

8.9

Model #

1900

GPP-2433 24 1/3 1140 850

The pit fans are housed in foot-long, 10" diameter PVC pipe extensions and 45° elbows are available as accessory items.

Rough Opening Height (in.)

CFM/WATT .05" SP

2010

Rough Opening Width (in.)

CFM .05" SP

GPP-1416 14 1/6 1725

out pit fans can be adapted to the ports. and can be easily adapted to existing pump out ports. PVC pipe

CFM 0" SP

Nominal RPM

Motor H.P.

Propeller Diameter

Model #

bulence fan values on the market today.

not extend into the manure, pump

10 1/6 3400 1015 989 962 6.1

Tested by Bess Laboratories, University of Illinois. Performance shown with guards and shutters in place (except with models DF-8 and DF-10 where shutters do not apply.

fiberglass panel fans Panel fans are available in 14", 18", 24" or 36" sizes with high efficiency motors for greater electrical economy. Tran torque bushing secures propeller to motor for greater gripping power. The fiberglass housing & propeller are combined with an aluminum motor mount for a lifetime of performance. These fans are available with guards on the front, rear, or both.

6

speciality fans


all weather fan hoods Nature plays an important role in the normal operation of ventilation equipment. Every ventilation fan that must function in cold weather or strong winds should be equipped with a protective hood to allow proper operation. All weather

Fan Accessories

fan hoods save energy costs by enabling fans to perform more efficiently. Constructed of fiberglass for long life, these hoods permit low RPM fans to deliver rated CFM volume. Fan hoods are available in sizes to fit 14" to 24" fans.

Transit tub™

wind diverter cone

The Transit Tub™ is ideal for confinement instal-

Minimize the effects

lations where a full pit waste system is planned.

of head winds with

Made of rugged fiberglass that is guaranteed for

minimal sacrificing

life, the Transit Tub­™ fits fans from 8" to 24".

of fan performance.

Installation is simple: leave an opening in the

AP's wind diverters

masonry foundation of the pit, attach the Transit

are inexpensive and

Tub™ to the pit wall and building wall and install

simple to install. Wind

the ventilation fan. An optional quick attach fan

deflector cones can be

mounting kit is available.

easily adapted to new or existing fans to improve the efficiency and performance of the total venti-

pit fan transition units

lation system.

Pit fan transition units convert 14", 18" and 24" Performer Series wall fans to deep pit ventilation fans used to remove dangerous gases from buildings with inside manure storage. These corrosion proof units are constructed of heavy duty poly for years of trouble free service. The quick attach fan mounting hardware allows the fan to be removed quickly and easily for regular cleaning to keep fans operating at peak performance.

discharge cone The optional discharge cone for the Performer series fans is designed to increase airflow and efficiency by approximately 15%.

aluminum shutter Our all-aluminum shutter is unequaled in the industry today. There are no steel parts to rust, while the only non-metallic parts on the shutter are nylon washers and sleeves. The nylon sleeves are self lubricating and only need to be cleaned to be functional. The most unique feature of the all-aluminum back-draft shutter is its ability to move to a full-open position. This is accom-

winter closure

plished by putting the shutter blade pivot pins

Designed for the coldest weather, these insu-

in a off-center position. Other shutter blades are hinged at the top of each blade which

lated panels seal out even the most extreme con-

does not permit full opening and thus creates shutter drag on the motor.

ditions found during the winter.

Also available is the Motor Operator Shutter. This heavy-duty shutter is equipped with a damper motor and chain assembly to withstand prolonged periods of use. The motor operated shutter will remain in the full open position without stealing horsepower from the fan.

fan accessories

7


Inlets & baffles

C2000 Ceiling Air inlet This ceiling inlet made of ABS plastic can be used year round. As a result of the inlet being four sided, room temperature is more consistent and air distribution is improved. The C2000 is insulated, therefore reducing condensation. Operating automatically off of the negative pressure supplied by the exhaust fans eliminates the need for manual controls, cables or pulleys. Pressure washing is simple with the all plastic construction.

AUTOMATED CEILING INLETS ACI actuated ceiling inlets combined with an Expert Controller provide precise control over the introduction of fresh air. The insulated stainless steel housing makes this inlet the most durable air inlet on the market. The actuation hardware is premounted to

Laminated baffle

speed installation and insure consistent operation of all inlets. ACI inlets are avail-

ceiling inlets

able in a 4000 CFM bi-directional or a

Each unit has a high quality plastic housing. The PVC coated

2500 CFM uni-directional model. These inlets are available in both stainless

polyurethane baffles and stainless steel hardware make this a Factory installed pulleys

steel or plastic housings.

Air inlet The BIL 3000 and 4000 inlets are second stage shutter type air inlets to be used in hallway to room application. As second stage inlets, they do not open until the first stage ceiling inlets are operating well. When they open the air is first directed upward then gradually moves horizontally.

totally corrosion-proof piece of equipment that will stand up to frequent wash downs. These bi-flow inlets come in two sizes; 1000 CFM and 2700 CFM. Adjustable locking lever allows the unit to be shut off or restricted as needed. This inlet is designed to have air travel along the ceiling in winter, yet have the ability to be directed at the livestock in the summer. Insulation stops are included to make framing easy.

Adjust-A-Baffle ™ Systems From the originators of the plastic adjustable air baffle comes the finest most versatile baffle type air delivery system available.

Counterweighted Baffle System

One-inch thick polystyrene with a rugged plastic coating fas-

The counterweighted baffle system allows the 12" baffle to

tened to UV stabilized PVC channels make any size a possibility.

become automatic without the use of a static pressure control.

A flexible PVC hinge and sealing strip slide into the PVC channel

This system is ideal for use in areas like pre-heated hallways, etc.

making installation a snap. Adjust-A-Baffle™ is available in 8",

Specifications: 3,000 CFM R.O. 46 1/2" W x 13 1/2" H

10", 12", 16", 18", 20" and 24" sizes.

8

inlets & baffles


K

omfort Kooler systems utilize the natural cooling effect of evaporation to com-

bat seasonal dips in production caused by heat stress. AP offers two different styles of Komfort Koolers. The Closed Top System has been an industry favorite for many years. Made of ultraviolet stabilized PVC, this system offers great durability and longevity. In

evaporative cooling systems

addition, a new and rapidly growing Open Top System is available. This design offers the grower easy access to manage and maintain their evaporative cooling system and utilizes a combination of PVC and the highest quality of stainless steel for years of dependable operation. Komfort Kooler Systems will adapt to new and existing facilities.

Open top design Made of high quality stainless steel, this system will give years of dependable operation under the harshest conditions. The Open Top design allows you to see the water jets and easily check water pressure. It also offers access to the spray

Closed Top System

bar for cleaning. Pre-punched and heavy duty stainless steel components help simplify installation.

Trough Assembly AP’s pre-formed square trough

Closed Top Design The Closed Top system is extruded from ultraviolet stabilized PVC for durability and ease of installation. The hinge-open cover and thumbscrews allows accessibility to spray bar and holds pads firmly in place. The spray bar bracket and water deflector insure pads are uniformly wet.

serves as a 3 gallon per lineal foot

Other features include: • A roto-molded holding tank offers in­creased water storage capacity.

(44.8 liters per meter) water res-

• Submersible pump keeps water levels

ervoir. Con­structed of corrosion

consistent for efficient water delivery.

proof, ultra-violet stabilized PVC

• Automatic float valve for matching

components, the trough

water supply with water demand.

allows unevaporated

• Easy removal of pads for cleaning.

water to be recirculat-

• Wide selection of cooling pads to

ed back to the holding tank. A perforated tray snaps to the trough to hold pads firmly in place.

choose from. Trough support brackets for suspending the system on the sidewall, and Center Feed Kits for longer cooling systems are optional.

Injection molded end caps and couplers speed installation. evaporative cooling systems

9


Curtain machine

P

rotect the health of your investment with a properly controlled curtain system.

Wide changes in the environment just don’t fly with today’s modern genetics. The combination of several different types of dependable drive units and a wide variety of versatile environmental controls, give you the edge to achieve excellent herd health.

curtain controller The newly designed Curtain Controller is a screw driven automated curtain machine with a heavy duty 15, 30 or 60 RPM, 115 VAC motor. Multi-directional, frame mounted, header pulleys and latch out assembly is standard on all machines. Thermostat controls, electronic controls and extra bracket kits are sold separately.

Adjustable latch out

Polyethylene pulley

switches can be installed

covers help stop the

in multiple locations to

elements from entering

energize and de-energize

through the area around

a variety of equipment.

the pulleys.

The Curtain Controller

Isolated primary and

Optional shaft mounted

drive block assembly features

secondary limit switches

potentiometer provides an

a nylon insert in a heavy-duty allow for back-up protec-

accurate and immediate

powder coated weldment.

tion. New one-piece,

signal to indicate move-

The removable nylon insert

galvanized, lift-off cover

ment and position of the

simplifies maintenance,

makes for ease of service.

drive. The potentiometer

decreases friction and pro-

Plastic water resistant

can be wired to an Expert

vides wear characteristics

junction box is accessible

Ventilation Control to

superior to conventional brass from the outside of the

allow precise control of air

drive blocks. UHMW poly-

inlets or curtains based on

ethylene guide wheels insure

temperature rather than

smooth travel, proper align-

static pressure.

ment and stability of the drive block in the machine.

10

curtain machine

curtain controller.


Curtain machine auto curtain 511 The 511 series is designed to be used with the latest in electronic controls. The internal timer has been removed allowing the newer electronic controls to fully utilize their electronic timers. The 511 series comes in two models; the 511 is the standard drum unit, while the 511S incorporates a sprocket drive configuration. Both of these machines employ the Auto Curtain’s standard of excellence, dura-

auto curtain 506

bility and performance.

Operates curtains on a cable system by winching cable around a grooved drum controlled by a thermostat and timer. The model 506S version uses a sprocket and chain drive (instead of drum) turning a pipe that runs the length of the building pulling the curtain or door drop cords directly around the pipe eliminating the need for cable (operates same as 506).

hardware kits Heavy-duty galvanized steel construction features sealed needle bearing pulleys, anti-wrap design and plated fasteners for ease of installation.

auto-air actuator The Auto-Air Actuator gives precise control of

SP-2 Control The SP-2 reads the static

automated air inlets or baffles. This powerful unit features 24" of travel and 700 pound lift capacity.

pressure in the room and

The actuators internal potentiometer communi-

adjusts any three wire drive

cates with any Airstream control through the PF-6

unit until it reaches your

inlet positioning module. The PF-6 and Auto-Air

preset requirement. With

Actuator work together to adjust

an adjustable time delay,

to the correct air inlet position for

manual adjustment and a

all stages of ventilation providing

high and low pressure alarm,

optimum environmental control.

this static pressure control is as complete as they get.

Quick Disconnect Cords

curtain machine

11


heating

Patented two-stage burner

Re-Verber-Ray Infra-red

The unique two stage burner adapts to varying

Getting heat where you want it can be difficult. One way is to use Re-Verber-Ray

conditions providing a more consistent comfort zone

Infra-red by AP. Infra-red heat emulates the true efficiency of the sun. It generates

with fewer off cycles. Units operate at low fire the

energy that is converted into heat when absorbed by objects like floors and ani-

majority of the time for improved energy efficiency.

mals. The energy is then re-radiated to warm the surrounding area by convection.

High fire mode provides reserve heating capability

This is the most efficient method of heating many swine facilities.

when conditions require.

Allowing heat to be directed straight to the animals allows them to find their own comfort zone either closer to or farther away from the heater according to their preference. This obviously reduces stress and allows for better pig performance. Heating starts at the floor level reducing the ambient temperature needed to keep animals comfortable. Therefore, reducing fuel bills.

• Two-Stage Technology • Fuel savings • Faster heat loss recoveries • Improved comfort levels • Reduction in equipment cycles • Design protection benefits.

Heavy duty control and burner unit in stainless steel

Controlled air intake increases flame surface for maximum efficiency. Bottom-draw design allows for consistent gas and air mix

enclosure, using outside air for combustion. Electronic igniter is encased to protect against heat and damage

Flame rod monitors heat chamber operatons

12

heating

Lo ga


purafire heaters These heavy-duty heaters provide a consistent, clean-burning and fuel efficient source for heat in any type of confinement installation. With near 100% efficiency, these thermostatically operated heaters use less energy to yield greater BTUs with one of the lowest CO outputs in the indus-

heating

try. Choose from two models: the C80variable output (40,000 to 80,000 BTUH) and the C225 (225,000 BTUH) unit. Each heater is LP or natural gas compatible and can be mounted inside or outside any confinement house.

Out Door Re-circulating kit Mounting heaters on the outside of nursery and farrowing buildings saves space and head room in crowded hall ways. Occasionally, snow or rain can cause outdoor mounted heaters to PuraFire heaters, including all components and sub components, are warranted to be free from defects in material and circulating out door heater mounting kit allows workmanship for a one-year period from the date you to choose between inside or outside com- of installation. fail when you need them the most. This re-

bustion air to keep your heaters functioning properly in all weather conditions.

Warning: Do not use this heater in an improperly ventilated area or where liquids with flammable vapors are stored or used.

The “Matchless” Heater

ow maintenance, all alvanized construction

PuraFire’s fast-acting 24 volt electronic ignition energizes in just ten seconds. This eliminates unpredictable pilot light flames, as well as the inconvenience of having to clean pilots or restart them with a

Controlled air flow pattern is directed to keep outer walls cooler Diagnostic light flashes if problems occur Gas valve is protected against corrosion and radiant heat Powerful, warm air output

Bottom-draw design allows for consistent gas and air mix

match. Plus, a stainless steel casing protects the igniter from damage and excessive heat exposure. PuraFire’s bottom-draw intake better controls the air flow into and throughout the entire unit and provides a more efficient mix of air and gas. Cool air, channeled along the inside casing, creates a buffer that keeps the outside cooler (not hot to the touch). This air pattern results in a unique bent flame design, which greatly increases the flame’s surface area and heat chamber efficiency.

The Advantage

• Outside is not hot to the touch

• Thermostat operated

• Motor assembly, blower, gas valve, control panel & other components are protected from moisture, dirt & dust

• Intelligent trouble-shooting safety features

• Swinging doors on each side allow access to all working parts

• Consistent, clean burning source of warmth with near 100% fuel efficiency

PuraFire igniters are made with stainless steel casings.

• In case of flame failure, an automatic fan shut down stops drafts & gas control lockout prevents gas from escaping • Bottom-draw intake better controls air flow. • “Bent flame” design greatly increases flame surface area & heat chamber efficiency

The PuraFire and Tube Heaters are CSA Certified. heating

13


Expert Controls Standard Features • Zoning of heaters, inlets and circulation fans with up to six inside temperature sensors

Controls

• Power save feature, allows smaller less efficient fans to be switched off as the temperature rises • Air inlet and curtain out puts using potentiometer feed back • Set point and minimum ventilation curves • Upload/download chip to duplicate programming of multiple controls • Seamless ventilation steps between stages when using variable speed fans • Seperate day/night minimum ventilation settings • Up to two timed out puts for feed systems, water or lights • Alarm that monitors up to ten functions • Cooling stage with cycle timer • Clean mode with soaking stage • Removeable relays with individual indicator lights and on/off/ auto switches • Overload and over voltage protection • Full speed start up on variable fan stages • Records heater run time up to seventy-five days • Records run time of up to four feed systems for up to seventy-five days • Records high and low temperature history for up to seven days • Records animal count, age and mortality Expert Controllers Optional Features • Humidity sensor input - Compensates heaters, minimum ventilation rate based on humidity. Records humidity history for up to seven days • Static Pressure input - Compensates inlets according to static

EXPERT VENTILATION CONTROLS

pressure. Records static pressure history for up to seven days

The Expert line of ventilation controls offers the professional producer precise control and monitoring of environment,

• Outside temperature sensor with compensation

feeding and watering. These versatile controllers can be custom

• Water meter input - Gives alarm in event of water spill

configured to meet the specific requirements of your facilities, and production practices.

Records water consumption history for up to seventy five days • Up to two additional variable speed fan or electric heat stages using 0-10 volt output

Expert Natural Curtain Zones

Up to Six

Chimney Zones

Up to Two

Expert VT110

Expert PN110

Expert Series 2

Relay outputs for fans, heaters, coolers, soakers and time clocks

Ten

Ten

Twelve

Stir Fan Stages

Two

Variable speed fan out puts

Two

Two

Two

Soaking Stages

One

Inlet drive outputs

One

One

Two

Cooling Stages

One

Output for tunnel ventilation inlet using timed operation

One

No

Two

Time Clock Outputs

Two

Output for timed natural ventilation

No

Two

Two

Heat Zones

Four

Maximum heat zones

Two

Three

Up to Six

14

controls


TC5 SERIES VENTILATION CONTROLS Airstream TC5 Series ventilation controls are sophisticated yet simple to program and operate. You probably have never imagined that this many features could be available at such a reasonable price. These controls are designed and manufactured for specific applications such as natural, tunnel or power/natural ventilation. Your AP dealer can

controls

assist you in selecting the perfect control to meet your requirements.

"MINI" EXPERT The "Mini" Expert line of controls offers many of the features of the Expert series of controls at a price comparable to the TC5 Series. "Mini" Experts are ideal for farrowing and nursery rooms requiring precise control of environment. Added Features Include • Button syle user interface • Seamless ventilation steps between variable speed stages • Internal air inlet output using potentiometer feed back • Outside temperature compensation for alarm settings • Records and displays heater run time for six days • Input for water meter to record six days usage • Upload / download chip for duplicating and storing settings • Day and night set points

TC5 Standard Features • Up to four temperature sensors averaging temperature • High/low temperature registration • Set point and minimum ventilation curves • Overload and over voltage protection • Zoned or cascading heat stages • Alarm out put • De-icing cycle on second stage variable fans Expert

TC5 Controllers Optional Features • Humidity sensor input • Air inlet control using PF-6 inlet position module and potentiometer

2V1SA

Expert 2V2SA

Expert 2V3SA

Expert 2V4SA

Variable speed outputs

Two

Two

Two

Two

Relay outputs for cooling or heating

One

Two

Three

Three

Inlet drive outputs using potentiometer feed-back

One

One

One

One

Alarm outputs

One

One

One

One

COMMUNICATION SYSTEMS Airstream controllers, timers, and monitors can be linked together and monitored from a PC on site or remotely via a modem. Our Agnet software package allows you to make changes to ventilation control and timer parameters, monitor current environmental conditions, data log and chart historical information. The software utilizes pull down menus and dialog boxes to make it simple to operate. MPV

10 amp variable speed booster control (for controls w/ 1 var. speed)

TC5-12SDA

12 on-off stages, alarm stage, display, humidity probe optional 1 var., 6 on-off stages, alarm stage, display, humidity probe optional

MPVV

20 amp variable speed booster control (for controls w/2 var. stages)

TC5-1V6SA

MPV-010

10 amp slave module for expert controls

TC5-1V10SA

1 var., 10 on-off stages, alarm stage, display, humidity probe optional

PF-6

potentiometer feedback control w/display (must be used w/a TC4 or TC5 series control)

TC5-2V2SA

2 var., 2 on-off stages, alarm stage, display, humidity probe optional

TC5-2V4SA

2 var., 4 on-off stages, alarm stage, display, humidity probe optional

HM-10

10 amp variable control for heat mats or lamps w/display

TC5-2V8SA

2 var., 8 on-off stages, alarm stage, display, humidity probe optional

TC1-C

variable speed control w/o display

TC5-1N4FIA

TC1-CD

variable speed control w/display

power natural ventilation control, 1 var., 1 on-off, 1 curtain, 1 mist, 1 heat, alarm stage, display, humidity probe optional

TC5-1N5FIAB

power natural ventilation control, 1 var., 1 or 2 on/off stages, 1 curtain, 1 timed mist, 2 heat- zone or cascade, alarm, display, humidity probe optional

TC5-1N8FA

power nat. vent. control, 2-var., 1 on-off, 1 curtain, 1 on-off, 1 timed mist, 3 heat zone or cascade, alarm, display, humidity probe optional

TC5-T1A

11 stage power/natural/tunnel control, 1 var. alarm stage, display, humidity probe optional

TC5-T6A

11 stage power/natural/tunnel control, alarm stage, display, humidity probe optional

TC5-ITA

timed inlet control with alarm

TC1-MFS

manual variable speed control

TC1-1SD

single stage on-off control w/display

TC4-4SD

4 stage on-off control w/display

TC4-1V2S

1 variable, 2 on-off stages w/display

TC4-1V3S

1 variable, 3 on-off stages w/display

TC1-NV

natural ventilation control w/o display

TC4-NVS

natural ventilation control, w/display and 1 on-off stage

TC5-NV2SA

natural ventilation control, w/display and 2 on-off stages

TC5-8SDA

8 stage on-off, alarm stage, display, humidity probe optional

controls

15


Automated Production Systems 1004 E. Illinois St. Assumption, IL 62510 USA 217-226-4449 Fax 217-226-3540 International Tel 217-226-4401 Fax 217-226-4420 5/08 AP-5


AP International Ventilation Product Brochure