Issuu on Google+

SRX-R220/210 Power Requirements


Three-phase power voltage setting

For R220/210, single-phase power supply switches automatically and can accept 100v to 250v AC. The three-phase power supply for the lamp must be set manually to either 200V or 400V,depending on the standard voltage in the country where the projector is installed. On shipment, it is set to 200V.

For setting, make sure to turn off the power.

Check the setting Voltage


Connection of AC power supply

Three-phase L1/L2/L3/N/PE

L1 L2 L3

Single-phase AC INLET

PE


Connections Picture inputs A~C, Ethernet, Inter lock


Safety Interlock • What is Safety Interlock? – Legal Safety Feature – Shuts down projector when cinema fire alarm activated – Normally simple open or closing contact • R220/210 has a 15 pin connector


Difference point list R220 and R210 R220

R210

Correspondence lamp

4.2KW (LKRX-2042A)

3.0KW (LKRX-2030A) 2.0KW (LKRX-2020A)

Light output (When the screen gain is 1.8)

14ft-L (@ 20m Screen)

14ft-L (@ 17m Screen) 14ft-L (@ 14m Screen)

Current value

Single-phase   11-5A ( 100-240V )   Three-phase   21A/11A ( 200-208V/380-415V )

Single-phase   11-5A ( 100-240V )   Three-phase   13.5/7A ( 200-208V/380-415V )

Setting of mode of lamp power supply

Mode:B

Mode:C


ng of mode of lamp power supply for 4.2Kw, 3Kw, 2Kw lamp

R220

MODE B

R210

MODE C


Luminance sensor and Lamp wattage R220/210 is equipped with a luminance sensor in the optical unit. When the LAMP POWER is changed, the luminance sensor value (not the LAMP POWER value) is saved. After Calibration, the table of the Lamp power and the Luminance sensor value is revised. When recalling the FUNCTION MEMORY, the lamp power is automatically set so that the luminance is maintained. Lamp power

Luminance sensor value

Lamp power

Luminance sensor value

100

1000

100

800

90

800

90

600

80

600

80

400

70

400

70

200

60

200

60

0

CALIBRATE


2 - Power supply and lamp power