John Deere 7721 COMBINE WITH BELT PICKUP AND PICKUP PLATFORM Parts Catalog Manual

1A2 COMBINE - 7721

HP1486

-UN-01JAN94

JOHN DEERE 7721 COMBINE WITH BELT PICKUP AND PICKUP PLATFORM

(SPECIFICATIONS AND DESIGN SUBJECT TO CHANGE WITHOUT NOTICE)

COMBINE - 7721 PC1669

(04-JAN-82)

10-1

PN=1

1A3 COMBINE - 7721

NOTE IN ADDITION TO TITAN COMBINES, PARTS INFORMATION FOR TITAN II COMBINES IS ALSO LOCATED IN THIS CATALOG. SERIAL NUMBER (610601) INDICATES TITAN II PARTS. FOR 40 SERIES CORN HEAD PARTS INFORMATION, REFER TO JOHN DEERE 40 SERIES CORN HEAD PARTS CATALOG - PC-1223.

FOR 50 SERIES ROW-CROP HEAD PARTS INFORMATION, REFER TO JOHN DEERE 50 SERIES ROW-CROP HEAD PARTS CATALOG - PC-1549.

FOR 50A SERIES ROW-CROP HEAD PARTS INFORMATION, REFER TO JOHN DEERE 50A SERIES ROW-CROP HEAD PARTS CATALOG - PC-1747.

FOR THREE-ROLLER BELT PICKUP PARTS INFORMATION, REFER TO JOHN DEERE THREE-ROLLER BELT PICKUP PARTS CATALOG - PC-1189.

IMPORTANT THIS PARTS CATALOG CONTAINS COMPLETE PARTS INFORMATION ON THE 7721 COMBINE. VINTAGE IS DETERMINED BY SERIAL NUMBERS UNDER WHICH COMBINES WERE MANUFACTURED. IT IS IMPORTANT THAT THE CORRECT SERIAL NUMBER BE USED WHEN ORDERING PARTS.

SERIAL NUMBERS WHEN WRITING ABOUT OR FILLING OUT WARRANTY CLAIMS, USE ALL NUMBERS, LETTERS AND SPACES SHOWN ON THE SERIAL NUMBER PLATE.

SEPARATOR SERIAL NUMBER PLATE E7721007001H E - DESIGNATES EQUIPMENT 7721 - DESIGNATES COMBINE MODEL 007001 - DESIGNATES COMBINE SERIAL NUMBER H - DESIGNATES FACTORY (HARVESTER WORKS) THE SEPARATOR SERIAL NUMBER PLATE IS LOCATED ON THE REAR LEFT-HAND UPRIGHT.

SERIAL NUMBER LISTING INFORMATION

SERIAL NUMBER INFORMATION IS LISTED TO SHOW ON WHICH MACHINES EACH PART CAN BE USED; FOR EXAMPLE: THE PART CAN BE USED ON ALL MACHINES. 000000THE PART CAN BE USED ON ALL MACHINES BEGINNING WITH THE SERIAL NUMBER LISTED. -000000 THE PART CAN BE USED ON ALL MACHINES UP TO AND INCLUDING THE SERIAL NUMBER LISTED. 000000-000000 THE PART CAN BE USED ON ALL MACHINES BETWEEN AND INCLUDING THE SERIAL NUMBERS LISTED. WHEN XXXXXX’S ARE LISTED IN PLACE OF A SERIAL NUMBER, A SERIAL NUMBER CHANGE WAS MADE BUT THE EXACT SERIAL NUMBER WAS NOT AVAILABLE WHEN THE CATALOG WAS PRODUCED.

10-2

COMBINE - 7721 PC1669

(08-OCT-86) PN=2

1A4 COMBINE - 7721

DIRECTION ARROW ARROWS ARE USED WITH ILLUSTRATIONS TO INDICATE THE FRONT OF THE UNIT. "RIGHT-HAND" AND "LEFTHAND" SIDES ARE DETERMINED BY FACING IN THE DIRECTION OF MACHINE FORWARD TRAVEL.

BOX-ENCLOSED ILLUSTRATIONS A KEY NUMBER, SHOWN IN THE PARTS LIST, IS ASSIGNED TO A BOX ENCLOSING ALL PARTS SOLD AS A SERVICE ASSEMBLY. A BOX NOT KEYED INCLUDES NON-CURRENT PARTS.

KITS KIT INFORMATION WILL BE FOUND IMMEDIATLEY FOLLOWING THE STORY IN WHICH IT IS USED. THE ILLUSTRATION IS REPEATED WITH ONLY THE KIT PARTS CALLED OUT AND WITH ALL OTHER PARTS SHOWN IN PHANTOM FOR RELATIONSHIP.

JDM REMANUFACTURED COMPONENTS THE SERVICE PARTS LISTED IN THIS CATALOG ARE INTENDED FOR THE REPAIR OF ORIGINAL EQUIPMENT COMPONENTS. ALTHOUGH MOST SERVICE PARTS MAY BE USED TO REPAIR REMANUFACTURED COMPONENTS, THE REMANUFACTURED DESIGN MAY CHANGE PARTS SUFFICIENTLY SO THAT SERVICE PARTS ARE INADEQUATE OR NOT USABLE.

BOLT AND CAP SCREW STRENGTH IDENTIFICATION BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH QUALITIES EQUIVALENT TO SAE GRADE 8 ARE IDENTIFIED THROUGHOUT THIS CATALOG BY THE DESCRIPTION HS SAE 8. ALL STANDARD BOLTS AND CAP SCREWS ARE SAE GRADE 5 OR LOWER.

COMPLETE GOODS LISTINGS COMPLETE GOODS ARE LISTED IN BOLD FACE TYPE. ORDER SEPARATELY. DO NOT INCLUDE ON REPLACEMENT PARTS ORDER.

SI UNITS OF MEASURE METRIC DIMENSIONS ARE GIVEN, WHERE APPLICABLE, THROUGHOUT THIS PARTS CATALOG.

TRADEMARKS THROUGHOUT THIS PARTS CATALOG, YOU WILL FIND THE FOLLOWING DEERE & COMPANY TRADEMARKS: DIAL-A-MATIC™ HARVESTRAK™

TORQ-GARD SUPREME® QUIK-TATCH™

CHANGE INDICATOR LINE (MICROFICHE CATALOGS ONLY) CHANGES AFFECTING THE ORDERING OF PARTS ARE IDENTIFIED BY VERTICAL LINES MARKED IN THE LEFT-HAND MARGIN OF REVISED PARTS LISTING IMAGES. A LINE IS ALSO AT THE LEFT-HAND EDGE OF THE SAME PART NUMBER IN THE NUMERICAL INDEX TO SHOW THE LOCATION OF REVISED INFORMATION.

COMBINE - 7721 PC1669

(16-MAY-88)

10-3

PN=3

1A5 COMBINE - 7721

SECTIONAL INDEX SECTION GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 ELECTRICAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 POWER TRAIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 SEPARATOR SHELL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 HEADERS - REFER TO INDIVIDUAL HEADER PARTS CATALOGS . . . . . . . . . . . . . . . . . . . . . 100 FEEDER HOUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 SEPARATOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 GRAIN TANK AND UNLOADING AUGER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 MAJOR DRIVES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 HEADER HEIGHT CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 DECALS, BELTS AND CHAINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 NUMERICAL INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180

10-4

COMBINE - 7721 PC1669

(20-JAN-84) PN=4

Thanks very much for your reading, Want to get more information, Please click here, Then get the complete manual

NOTE: If there is no response to click on the link above, please download the PDF document first, and then click on it.

Have any questions please write to me: admin@servicemanualperfect.com

1A6 COMBINE - 7721 ALPHABETICAL INDEX GRID

PAGE

A 2I23 2C16 2I22 2B6 1D17 1D19 2H9 2H20 2H3 2H18 2G22 2H11 1E17 1E18 1E20 1E17 1E18 1E20 2H13 2H15 2H16 2G24 2G25 2F5 2E17 2E18 2E2 2H21 2F2 2D2 2C22 2C22 2D4 1C11 1C12

ACTUATING SWITCH AND MOUNTING PARTS................

AIR DUCTS, CLEANING FAN ..............................................

AMPLIFIER AND BRACKET ................................................

ARM, DUAL-RANGE CYLINDER DRIVE ............................

ARMATURE REPAIR KIT (AE37061) ..................................

ARMATURE REPAIR KIT (AH96359) ..................................

AUGER AND HOUSING, GRAIN TANK VERTICAL............

AUGER AND HOUSING, HORIZONTAL UNLOADING ......

AUGER COVERS, GRASS SEED UNLOADING ................

AUGER DRIVE GEAR CASE,HORIZONTAL UNLDG. ........

AUGER DRIVE TIGHTENERS,GRAIN TANK CROSS ........

AUGER LOWER GEAR CASE, VERTICAL ........................

AUGER SWING HYDRAULIC CYLINDER,UNLOADING ....

AUGER SWING HYDRAULIC CYLINDER,UNLOADING ....

AUGER SWING HYDRAULIC CYLINDER,UNLOADING ....

AUGER SWING HYDRAULIC MOUNTING,UNLOADING....

AUGER SWING HYDRAULIC MOUNTING,UNLOADING....

AUGER SWING HYDRAULIC MOUNTING,UNLOADING....

AUGER SWIVEL SHROUD,HORIZONTAL UNLOADING....

AUGER SWIVEL, HORIZONTAL UNLOADING ..................

AUGER SWIVEL, HORIZONTAL UNLOADING ..................

AUGER, CROSS, GRAIN TANK FRONT ............................

AUGER, GRAIN TANK REAR CROSS ................................

AUGER, LOADING ................................................................

AUGER, LOWER TAILINGS ................................................

AUGER, LOWER TAILINGS ................................................

AUGER, LOWER, CLEAN GRAIN........................................

AUGER, UNLOADING LUBE BANK SYSTEM ....................

AUGER, UPPER TAILINGS ..................................................

AUGERS, HOUSING, SHOE GRAIN SUPPLY ....................

AUGERS, SHOE GRAIN SUPPLY DRIVE SHEAVE ..........

AUGERS, SHOE GRAIN SUPPLY, DRIVE SHAFT ............

AUGERS, SUPPLY, SHOE GRAIN ......................................

AXLE FRAME ........................................................................

AXLE FRAME ........................................................................

160 - 10 120 - 53 160 - 9 120 - 15 70 - 15 70 - 17 130 - 27 130 - 39 130 - 21 130 - 37 130 - 15 130 - 29 70 - 41 70 - 42 70 - 44 70 - 41 70 - 42 70 - 44 130 - 31 130 - 33 130 - 34 130 - 17 130 - 18 120 - 121 120 - 107 120 - 108 120 - 91 130 - 40 120 - 118 120 - 63 120 - 59 120 - 59 120 - 65 50 - 5 50 - 6

B 2B22 1C11 1C12 2B17 2C12 2C13 2E24 2E25 2C9 2C10 2C9 2C10 2C12 2C13 2C9 2C10 2C5 2C6 2J11 2C7 2C9 2C10 2J10 1B19 1E7 1E8

BAR, CYLINDER SHEAR......................................................

BEAM, HITCH........................................................................

BEAM, HITCH........................................................................

BEARING HSG.,CYL.SHAFT,LUBE BANK SYS-RH............

BEARING, BEATER, LUBE BANK SYSTEM-L.H.................

BEARING, BEATER, LUBE BANK SYSTEM-R.H. ..............

BEARINGS, TAILINGS ELEVATOR CONVEYOR................

BEARINGS, TAILINGS ELEVATOR CONVEYOR................

BEATER ................................................................................

BEATER ................................................................................

BEATER AND TACHOMETER DRIVE ................................

BEATER AND TACHOMETER DRIVE ................................

BEATER BEARING LUBE BANK SYSTEM-L.H. ................

BEATER BEARING LUBE BANK SYSTEM-R.H. ................

BEATER BELT ......................................................................

BEATER BELT ......................................................................

BEATER DRIVE ....................................................................

BEATER DRIVE ....................................................................

BEATER DRIVE SHEAVES AND BELTS ............................

BEATER DRIVE, DUAL-RANGE ..........................................

BEATER FOR CYLINDER TACHOMETER..........................

BEATER FOR CYLINDER TACHOMETER..........................

BELT AND SHEAVES TORQ-SENSING CTRSHAFT ........

BELT PICKUP DRIVE - ELECTRIC MOTOR ......................

BELT PICKUP FLOW CONTROL VALVE............................

BELT PICKUP FLOW CONTROL VALVE KIT ....................

COMBINE - 7721 PC1669

(18-APR-00)

120 - 33 50 - 5 50 - 6 120 - 27 120 - 48 120 - 49 120 - 114 120 - 115 120 - 45 120 - 46 120 - 45 120 - 46 120 - 48 120 - 49 120 - 45 120 - 46 120 - 40 120 - 41 170 - 6 120 - 43 120 - 45 120 - 46 170 - 5 40 - 30 70 - 30 70 - 31

GRID 1D1 1E11 1E2 1E6 2J9 1E4 1E2 2C9 2C10 2A25 2E11 2B1 2F7 2F24 2F12 2D11 2C22 2J10 2J11 2J11 2J14 2J12 2J8 2J14 2J13 2G4 2F25 2G1 2E7 1G2 1B5 1F15 2E7 2G11 2G12 2A21 2A22 2E5 2I22 1B11 2D16 2I19 1A17 1A18

BELT PICKUP HYDRAULIC PUMP MOUNTING ................

BELT PICKUP OIL LINES ....................................................

BELT PICKUP PUMP............................................................

BELT PICKUP PUMP BACK PLATE KIT ............................

BELT PICKUP PUMP DRIVE SHEAVES ............................

BELT PICKUP PUMP KIT ....................................................

BELT PICKUP SHEAVE........................................................

BELT, BEATER......................................................................

BELT, BEATER......................................................................

BELT, CYLINDER DRIVE INTERMEDIATE SHAFT ............

BELT, DR. CTRSHAFT.,CLEAN GRAIN ELEVATOR..........

BELT, DUAL-RANGE CYLINDER DRIVE INTERMEDIATE SHAFT ..................................................

BELT, GEAR CASE, LOADING AUGER..............................

BELT, REAR, STRAW CHOPPER ......................................

BELT, STRAW CHOPPER DRIVE ......................................

BELT, STRAW SPREADER DRIVE ....................................

BELT,SHOE GRAIN SUPPLY AUGERS DR. SHAFT ........

BELTS AND SHEAVES ........................................................

BELTS AND SHEAVES, BEATER DRIVE ..........................

BELTS, BEATER DRIVE ......................................................

BELTS, CLEAN GRAIN ELEVATOR ....................................

BELTS, DRIVE, CLEANING FAN ........................................

BELTS, DRIVE, FEEDER HOUSE (REG. FIXED) ..............

BELTS, LOADING AUGER ..................................................

BELTS,DRIVE,SHOE GRAIN SUPPLY AUGERS ................

BLADE, STRAW SPREADER ..............................................

BLADES AND ROTOR, STRAW CHOPPER ......................

BLADES AND ROTOR, STRAW CHOPPER ......................

BOOT, CLEAN GRAIN ELEVATOR HOUSING ..................

BOTTOM SHEETS, FEEDER HOUSE ................................

BOX, CONTROL, LOW SHAFT SPEED MONITORS..........

BOX, TOOL............................................................................

BRACE, CLEAN GRAIN ELEVATOR HOUSING ................

BRACE, GRAIN TANK REINFORCEMENT ........................

BRACE, GRAIN TANK, REINFORCEMENT BRACE ..........

BRACES, SUPPORT, CYLINDER DRIVE ............................

BRACES, SUPPORT, INTERMEDIATE DRIVE, DUAL-RANGE CYLINDER................................................

BRACKET, CLEAN GRAIN ELEVATOR HOUSING ............

BRACKET, FRONT, AMPLIFIER ..........................................

BRACKET, HARVESTRAK CONSOLE ................................

BRACKETS, CHAFFER FRAME ..........................................

BRACKETS, DIAL-A-MATIC..................................................

BRACKETS, MOUNTING, CONTROL BOX ........................

BRKT., MTG., CONTROL BOX, DIAL-A-MATIC ..................

PAGE 50 - 20 70 - 35 70 - 25 70 - 29 170 - 4 70 - 27 70 - 25 120 - 45 120 - 46 120 - 9 120 - 100 120 - 10 120 - 123 120 - 141 120 - 129 120 - 73 120 - 59 170 - 5 170 - 6 170 - 6 170 - 9 170 - 7 170 - 3 170 - 9 170 - 8 120 - 147 120 - 142 120 - 143 120 - 96 110 - 9 40 - 16 80 - 11 120 - 96 130 - 4 130 - 5 120 - 5 120 - 6 120 - 94 160 - 9 40 - 22 120 - 79 160 - 6 40 - 3 40 - 4

C 1B23 1D25 1C23 2J22 2D18 2D14 2D16 2D14 2D16 2E12 2D23 2J12 1G8 1C11 1C12 2D12 2E24

CABLE, WIRING....................................................................

CAP, HYDRAULIC OIL RESERVOIR ..................................

CASE, GEAR ........................................................................

CAUTION DECALS ..............................................................

CHAFFER ..............................................................................

CHAFFER FRAME ................................................................

CHAFFER FRAME BRACKETS............................................

CHAFFER FRAME COVER ..................................................

CHAFFER FRAME SWINGERS............................................

CHAIN, CONVEYOR, CLEAN GRAIN ELEVATOR ............

CHAIN, CRANK SHOE..........................................................

CHAIN, DRIVE, STRAW WALKER ......................................

CHAIN, FEEDER CONVEYOR ............................................

CHAIN, SAFETY, HITCH ......................................................

CHAIN, SAFETY, HITCH ......................................................

CHAIN, STRAW WALKER ....................................................

CHAIN, TAILINGS ELEVATOR CONVEYOR ......................

40 - 34 70 - 23 50 - 17 170 - 17 120 - 81 120 - 77 120 - 79 120 - 77 120 - 79 120 - 101 120 - 87 170 - 7 110 - 15 50 - 5 50 - 6 120 - 75 120 - 114

10-5

PN=5

1A7 COMBINE - 7721 ALPHABETICAL INDEX - CONTINUED GRID 2E25 2H1 2F15 2F17 2F23 2F19 2F21 2J1 2E10 2J14 2E11 2E4 2E5 2E7 2J14 2E2 2D25 2C20 2C16 2J12 2J12 2C18 2C15 1B20 1B21 2C4 2B24 1C1 1C5 1B11 1A17 1A17 1A18 1A21 1A22 1A17 1A18 1B5 1C15 1E7 1D15 2I15 2C15 1D9 2E12 2I13 2I5 2I6 2I3 2I11 2G20 2E11 1F21 1F20 1D7 2D14 2B11 2B21 2H2 2H1 2H3 2D23 2D9 2D11 2G22 2J18

10-6

CHAIN, TAILINGS ELEVATOR CONVEYOR ......................

CHANNELS, GRAIN TANK ..................................................

CHOPPER HOUSING, STRAW ............................................

CHOPPER, HOUSING, STRAW ..........................................

CHOPPER, STRAW, KNIFE AND SUPPORT ....................

CHOPPER, STRAW, PLATE AND FINS..............................

CHOPPER, STRAW, PLATE AND FINS..............................

CIRCUIT BOX AND SWITCHES,DIAL-A-MATIC..................

CLEAN GR.ELEV. DRIVE TIGHTENER AND IDLER..........

CLEAN GRAIN ELEVATOR DRIVE......................................

CLEAN GRAIN ELEVATOR DRIVE COUNTERSHAFT ......

CLEAN GRAIN ELEVATOR HOUSING ................................

CLEAN GRAIN ELEVATOR HOUSING ................................

CLEAN GRAIN ELEVATOR HOUSING BOOT ....................

CLEAN GRAIN ELEVATOR SHEAVES AND BELTS..........

CLEAN GRAIN LOWER AUGER AND HOUSING ..............

CLEAN GRAIN LOWER AUGER HOUSING........................

CLEANING FAN ....................................................................

CLEANING FAN AIR DUCTS ..............................................

CLEANING FAN DRIVE BELTS ..........................................

CLEANING FAN DRIVE SHEAVES......................................

CLEANING FAN HOUSING ..................................................

CLEANING FAN SPEED CONTROL....................................

CLUTCH, ELECTROMAGNETIC ..........................................

CLUTCH,ELECTROMAGNETIC,UNLOADING AUGER ......

CONCAVE ADJUSTING SHAFT AND RATCHET ..............

CONCAVE, OPEN-BAR ........................................................

CONNECTOR, ELECTRICAL, SERVICE KIT ......................

CONNECTORS, SUPPLEMENTARY TERMINALS..............

CONSOLE, HARVESTRAK ..................................................

CONTROL BOX HARNESS ..................................................

CONTROL BOX HOUSING ..................................................

CONTROL BOX HOUSING, DIAL-A-MATIC ........................

CONTROL BOX INDICATORS ............................................

CONTROL BOX INDICATORS ............................................

CONTROL BOX MOUNTING BRACKETS ..........................

CONTROL BOX WIRING HARNESS, DIAL-A-MATIC ........

CONTROL BOX, LOW SHAFT SPEED MONITORS ..........

CONTROL ROD (HITCH TUBE) ..........................................

CONTROL VALVE, BELT PICKUP FLOW ..........................

CONTROL VALVE, CYLINDER SPEED ..............................

CONTROL VALVE, DIAL-A-MATIC ......................................

CONTROL, SPEED, CLEANING FAN..................................

CONVERSION HOSES AND COUPLERS ..........................

CONVEYOR CHAIN, CLEAN GRAIN ELEVATOR ..............

COUNTERSHAFT DRIVE IDLER, SECONDARY ................

COUNTERSHAFT SHEAVES, PRIMARY ............................

COUNTERSHAFT SHEAVES, PRIMARY ............................

COUNTERSHAFT, PRIMARY AND MOUNTINGS ..............

COUNTERSHAFT, SECONDARY ........................................

COUNTERSHAFT, UNLOADING AUGER DRIVE................

COUNTERSHAFT,DRIVE,CLEAN GRAIN ELEVATOR........

COUPLER, QUIK-TATCH (L.H.) ..........................................

COUPLER, QUIK-TATCH (R.H.) ..........................................

COUPLERS AND HOSES ....................................................

COVER, CHAFFER FRAME ................................................

COVER, DUAL-RANGE CYLINDER GEAR CASE ..............

COVERS, CYLINDER............................................................

COVERS, GRAIN TANK FRONT AND REAR, ADJUSTABLE....................................................................

COVERS, GRAIN TANK INNER UNLOADING AUGER ......

COVERS, GRASS SEED UNLOADING AUGER ................

CRANKSHAFT DRIVE TIGHTENER, SHOE ........................

CRANKSHAFT, STRAW WALKER FRONT ........................

CRANKSHAFT, STRAW WALKER REAR............................

CROSS AUGER DRIVE TIGHTENERS,GRAIN TANK ........

CROSS AUGER DRIVES......................................................

PAGE 120 - 115 130 - 19 120 - 132 120 - 134 120 - 140 120 - 136 120 - 138 160 - 12 120 - 99 170 - 9 120 - 100 120 - 93 120 - 94 120 - 96 170 - 9 120 - 91 120 - 89 120 - 57 120 - 53 170 - 7 170 - 7 120 - 55 120 - 51 40 - 31 40 - 32 120 - 39 120 - 35 40 - 36 40 - 40 40 - 22 40 - 3 40 - 3 40 - 4 40 - 7 40 - 8 40 - 3 40 - 4 40 - 16 50 - 9 70 - 30 70 - 13 160 - 1 120 - 51 70 - 6 120 - 101 140 - 17 140 - 9 140 - 10 140 - 7 140 - 15 130 - 13 120 - 100 110 - 3 110 - 1 70 - 4 120 - 77 120 - 20 120 - 31 130 - 20 130 - 19 130 - 21 120 - 87 120 - 71 120 - 73 130 - 15 170 - 13

GRID 2G24 2G25 2B16 2F14 2D5 2B18 2B21 2B21 1F6 2B16 2A25 2A21 2B4 2A18 1G6 2B19 2B17 2B22 1D15 1A24 1A21 2C9 2C10 1A22 1A21 1G5 2B8 2B9 1E15 1E17 1E18 1E20

CROSS AUGER, GRAIN TANK FRONT..............................

CROSS AUGER, GRAIN TANK REAR ................................

CTRSHAFT.BRG.HSG.,CYL.DR.LUBE BANK-RH................

CURTAIN, STRAW CHOPPER ............................................

CURTAINS, SEPARATOR ....................................................

CYL.SHAFT BRG.HSG.LUBE BANK (R.H.) ........................

CYLINDER COVER DEFLECTOR ........................................

CYLINDER COVERS ............................................................

CYLINDER DOOR, SEALS, AND FEED PLATE ................

CYLINDER DR.CTRSHAFT.BRG.HSG.LUBE-RH ................

CYLINDER DRIVE INTERMEDIATE SHAFT........................

CYLINDER DRIVE SUPPORT BRACES..............................

CYLINDER DRIVE TIGHTENER ..........................................

CYLINDER DRIVES SHIELD ................................................

CYLINDER KIT, HEADER LIFT HYDRAULIC......................

CYLINDER SHAFT BEARING LUBE BANK SYS-LH ..........

CYLINDER SHAFT BRG.HSG.LUBE BANK SYS-RH..........

CYLINDER SHEAR BAR ......................................................

CYLINDER SPEED CONTROL VALVE................................

CYLINDER SPEED, TACHOMETER SENSOR....................

CYLINDER TACHOMETER ..................................................

CYLINDER TACHOMETER ..................................................

CYLINDER TACHOMETER ..................................................

CYLINDER TACHOMETER AND MOUNTINGS ..................

CYLINDER TACHOMETER MOUNTINGS ..........................

CYLINDER, HYDRAULIC, HEADER LIFT ............................

CYLINDER, RASP-BAR ........................................................

CYLINDER, RASP-BAR (DUAL-RANGE CYLINDER DRIVE) ..............................................................................

CYLINDER,UNLOADING AUGER SWING HYDRAULIC ....

CYLINDER,UNLOADING AUGER SWING HYDRAULIC ....

CYLINDER,UNLOADING AUGER SWING HYDRAULIC ....

CYLINDER,UNLOADING AUGER SWING HYDRAULIC ....

PAGE 130 - 17 130 - 18 120 - 26 120 - 131 120 - 67 120 - 28 120 - 31 120 - 31 80 - 1 120 - 26 120 - 9 120 - 5 120 - 13 120 - 1 110 - 13 120 - 29 120 - 27 120 - 33 70 - 13 40 - 11 40 - 7 120 - 45 120 - 46 40 - 8 40 - 7 110 - 12 120 - 17 120 - 18 70 - 39 70 - 41 70 - 42 70 - 44

D 2J25 2J24 2J22 2J22 2B21 2I23 2I17 2I16 2J1 2I15 2I21 2J4 2I18 2J1 2I15 2I19 1F25 2E4 2E7 2D25 1F6 2G13 2E21 2E22 1C8 1C9 2E11

DECAL KIT ............................................................................

DECALS ................................................................................

DECALS, CAUTION ..............................................................

DECALS, WARNING ............................................................

DEFLECTOR, CYLINDER COVER ......................................

DIAL-A-MATIC ACTUATING SWITCH AND MOUNTING ......................................................................

DIAL-A-MATIC BLOCK SOLENOID......................................

DIAL-A-MATIC CHECK BLOCK KIT ....................................

DIAL-A-MATIC CIRCUIT BOX ..............................................

DIAL-A-MATIC CONTROL VALVE........................................

DIAL-A-MATIC DROP RATE VALVE KIT ............................

DIAL-A-MATIC HARNESS ADAPTER FOR 900 SERIES HEADERS....................................................

DIAL-A-MATIC SOLENOID KIT ............................................

DIAL-A-MATIC SWITCHES ..................................................

DIAL-A-MATIC VALVE KIT ..................................................

DIAL-A-MATIC VALVES, FITTINGS, AND BRACKETS........................................................................

DOOR LEVER, TOP, FEEDER HOUSE ..............................

DOOR, CLEAN GRAIN ELEVATOR ....................................

DOOR, CLEAN GRAIN ELEVATOR HOUSING ..................

DOOR, CLEAN GRAIN LOWER AUGER ............................

DOOR, CYLINDER, SEALS AND FEED PLATE ................

DOOR, GRAIN TANK............................................................

DOOR, TAILINGS ELEVATOR ............................................

DOOR, TAILINGS ELEVATOR ............................................

DRAWBAR EXTENSION ......................................................

DRAWBAR EXTENSION (4430 TRACTOR) ........................

DRIVE COUNTERSHAFT, CLEAN GRAIN ELEVATOR......

COMBINE - 7721 PC1669

170 - 20 170 - 19 170 - 17 170 - 17 120 - 31 160 - 10 160 - 3 160 - 2 160 - 12 160 - 1 160 - 8 160 - 15 160 - 5 160 - 12 160 - 1 160 - 6 110 - 7 120 - 93 120 - 96 120 - 89 80 - 1 130 - 6 120 - 111 120 - 112 50 - 1 50 - 3 120 - 100

(18-APR-00) PN=6

1A8 COMBINE - 7721 ALPHABETICAL INDEX - CONTINUED GRID 2C9 2C10 2H18 2H25 2I13 2A25 2C22 2E10 2B4 2C24 2G22 2C5 2C6 2C7 2J14 2B1 2J14 2C9 2C10 2A18 2J18 2J20 2J20 2J16 2J18 2J18 1G7 2C7 2B6 2B15 2B1 2B14 2B13 2B6 2B11 2A22 2C16

DRIVE FOR CYLINDER TACHOMETER ............................

DRIVE FOR CYLINDER TACHOMETER ............................

DRIVE GEAR CASE,HORIZONTAL UNLDG.AUGER..........

DRIVE IDLER, FEEDER HOUSE ........................................

DRIVE IDLER, SECONDARY COUNTERSHAFT ................

DRIVE INTERMEDIATE SHAFT, CYLINDER ......................

DRIVE SHAFT, SHOE GRAIN SUPPLY AUGERS..............

DRIVE TIGHTENER, CLEAN GRAIN ELEVATOR ..............

DRIVE TIGHTENER, CYLINDER..........................................

DRIVE TIGHTENER,SHOE GRAIN SUPPLY AUGERS ......

DRIVE TIGHTENERS,GRAIN TANK CROSS AUGER ........

DRIVE, BEATER....................................................................

DRIVE, BEATER....................................................................

DRIVE, BEATER, DUAL-RANGE..........................................

DRIVE, CLEAN GRAIN ELEVATOR ....................................

DRIVE, DUAL-RANGE CYLINDER, INTERMEDIATE SHAFT ..................................................

DRIVE, LOADING AUGER....................................................

DRIVE, TACHOMETER ........................................................

DRIVE, TACHOMETER ........................................................

DRIVES SHIELD, CYLINDER ..............................................

DRIVES, CROSS AUGER ....................................................

DRIVES, STRAW CHOPPER ..............................................

DRIVES, STRAW SPREADER ............................................

DRIVES, TAILINGS ELEVATOR AND AUGER....................

DRIVES, UNLOADING AUGER ............................................

DRIVES, VERTICAL UNLOADING AUGER ........................

DRUM, FEEDER CONVEYOR..............................................

DUAL-RANGE BEATER DRIVE............................................

DUAL-RANGE CYLINDER DRIVE ARM ..............................

DUAL-RANGE CYLINDER DRIVE GEAR CASE SHIELD ..............................................................................

DUAL-RANGE CYLINDER DRIVE INTERMEDIATE SHAFT ..............................................................................

DUAL-RANGE CYLINDER DRIVE LOCKOUT ARM............

DUAL-RANGE CYLINDER DRIVE PINION GEARS ............

DUAL-RANGE CYLINDER DRIVE TIGHTENER..................

DUAL-RANGE CYLINDER GEAR CASE ............................

DUAL-RANGE CYLINDER INTERMEDIATE DRIVE SUPPORT BRACES ........................................................

DUCTS, AIR, CLEANING FAN ............................................

PAGE 120 - 45 120 - 46 130 - 37 140 - 4 140 - 17 120 - 9 120 - 59 120 - 99 120 - 13 120 - 61 130 - 15 120 - 40 120 - 41 120 - 43 170 - 9 120 - 10 170 - 9 120 - 45 120 - 46 120 - 1 170 - 13 170 - 15 170 - 15 170 - 11 170 - 13 170 - 13 110 - 14 120 - 43 120 - 15 120 - 25 120 - 10 120 - 23 120 - 22 120 - 15 120 - 20 120 - 6 120 - 53

GRID 1G8 1G7 1G7 1G2 2J8 2H25 2J8 1G13 1G4 1G4 1F23 2J8 1G9 1G11 1G10 1G10 1G4 2J8 1F25 1F25 1G12 1G12 1B16 1B16 1D25 2F21 2F19 2B18 2G18 1F10 1F8 2D16 1C11 1C12 2D14 1G4 2D20 2H2 2G24 1B16 2G10

FEEDER CONVEYOR CHAIN ..............................................

FEEDER CONVEYOR DRUM ..............................................

FEEDER CONVEYOR IDLER SHAFT..................................

FEEDER HOUSE BOTTOM SHEETS ..................................

FEEDER HOUSE DRIVE BELTS (REG. FIXED) ................

FEEDER HOUSE DRIVE IDLER ..........................................

FEEDER HOUSE DRIVE SHEAVES (REG. FIXED) ..........

FEEDER HOUSE DRIVE TIGHTENER ................................

FEEDER HOUSE FALSE BOTTOM ....................................

FEEDER HOUSE FRAME ....................................................

FEEDER HOUSE FRONT SHEETS ....................................

FEEDER HOUSE IDLERS (REG. FIXED)............................

FEEDER HOUSE LEFT-HAND SHIELD ..............................

FEEDER HOUSE LOWER BELT TIGHTENER....................

FEEDER HOUSE LOWER SHAFT ......................................

FEEDER HOUSE LOWER SHEAVE ....................................

FEEDER HOUSE SIDE SHEETS ........................................

FEEDER HOUSE TIGHTENERS (REG. FIXED) ................

FEEDER HOUSE TOP DOOR LEVER ................................

FEEDER HOUSE TOP SHEETS ..........................................

FEEDER HOUSE UPPER SHAFT........................................

FEEDER HOUSE UPPER SHEAVES ..................................

FIELD LAMP ..........................................................................

FIELD LAMP HARNESS ......................................................

FILTER, HYDRAULIC RESERVOIR ....................................

FINS AND PLATE, STRAW CHOPPER ..............................

FINS, PLATE, STRAW CHOPPER ......................................

FITTING,CYL.SHAFT BRG.HSG.LUBE BANK-RH ..............

FLIP-UPS, GRAIN TANK ......................................................

FRAME AND SIDE SHEETS, SEPARATOR L.H.................

FRAME AND SIDE SHEETS, SEPARATOR R.H. ..............

FRAME BRACKETS, CHAFFER ..........................................

FRAME, AXLE ......................................................................

FRAME, AXLE ......................................................................

FRAME, CHAFFER ..............................................................

FRAME, FEEDER HOUSE....................................................

FRAME, SIEVE......................................................................

FRONT AND REAR GRAIN TANK AUGER COVERS, ADJUSTABLE....................................................................

FRONT CROSS AUGER, GRAIN TANK..............................

FRONT REFLECTOR............................................................

FRONT, FALSE, GRAIN TANK ............................................

PAGE 110 - 15 110 - 14 110 - 14 110 - 9 170 - 3 140 - 4 170 - 3 110 - 20 110 - 11 110 - 11 110 - 5 170 - 3 110 - 16 110 - 18 110 - 17 110 - 17 110 - 11 170 - 3 110 - 7 110 - 7 110 - 19 110 - 19 40 - 27 40 - 27 70 - 23 120 - 138 120 - 136 120 - 28 130 - 11 80 - 5 80 - 3 120 - 79 50 - 5 50 - 6 120 - 77 110 - 11 120 - 83 130 - 20 130 - 17 40 - 27 130 - 3

E G 1B19 1C1 1B20 1B21 2E5 2E4 1C8 1C9 2G18 2A22

ELECTRIC MOTOR - BELT PICKUP DRIVE ......................

ELECTRICAL CONNECTOR SERVICE KIT ........................

ELECTROMAGNETIC CLUTCH............................................

ELECTROMAGNETIC CLUTCH,UNLOADING AUGER ......

ELEVATOR HOUSING, CLEAN GRAIN ..............................

ELEVATOR, HOUSING, CLEAN GRAIN..............................

EXTENSION, DRAWBAR ......................................................

EXTENSION, DRAWBAR (4430 TRACTOR) ......................

EXTENSIONS, GRAIN TANK ..............................................

EYEBOLTS, DUAL-RANGE CYLINDER INTERMEDIATE DRIVE SUPPORT ................................

40 - 30 40 - 36 40 - 31 40 - 32 120 - 94 120 - 93 50 - 1 50 - 3 130 - 11 120 - 6

F 1G4 2G10 2C20 2C16 2C18 2C15 1F6

FALSE BOTTOM, FEEDER HOUSE ....................................

FALSE FRONT, GRAIN TANK ............................................

FAN, CLEANING ..................................................................

FAN, CLEANING, AIR DUCTS ............................................

FAN, CLEANING, HOUSING ................................................

FAN, CLEANING, SPEED CONTROL..................................

FEED PLATE, CYLINDER ....................................................

COMBINE - 7721 PC1669

(18-APR-00)

110 - 11 130 - 3 120 - 57 120 - 53 120 - 55 120 - 51 80 - 1

1C23 2B11 2H18 2F8 2F7 2F8 2H11 1C23 2B13 1D25 2F8 2G22 2G18 2G10 2G18 2G24 1B14 2H1 1B14 2G25 2G16

GEAR CASE ..........................................................................

GEAR CASE, CYLINDER, DUAL-RANGE............................

GEAR CASE, DRIVE, HORIZONTAL UNLDG.AUGER ......

GEAR CASE, GRAIN TANK ................................................

GEAR CASE, LOADING AUGER ........................................

GEAR CASE, LOADING AUGER ........................................

GEAR CASE, VERTICAL AUGER LOWER ........................

GEAR CASE, WITH GEARS AND SHAFTS ........................

GEARS, PINION, DUAL-RANGE CYLINDER DRIVE ..........

GLASS, LEVEL SIGHT, HYDRAULIC RESERVOIR............

GRAIN TANK AND LOADING AUGER GEAR CASE ........

GRAIN TANK CROSS AUGER DRIVE TIGHTENERS........

GRAIN TANK EXTENSIONS ................................................

GRAIN TANK FALSE FRONT ..............................................

GRAIN TANK FLIP-UPS ......................................................

GRAIN TANK FRONT CROSS AUGER ..............................

GRAIN TANK HARNESS ......................................................

GRAIN TANK INNER UNLOADING AUGER COVERS ......

GRAIN TANK LAMP..............................................................

GRAIN TANK REAR CROSS AUGER ................................

GRAIN TANK SKIRTS ..........................................................

50 - 17 120 - 20 130 - 37 120 - 124 120 - 123 120 - 124 130 - 29 50 - 17 120 - 22 70 - 23 120 - 124 130 - 15 130 - 11 130 - 3 130 - 11 130 - 17 40 - 25 130 - 19 40 - 25 130 - 18 130 - 9

10-7

PN=7

1A9 COMBINE - 7721 ALPHABETICAL INDEX - CONTINUED GRID 2H5 2H6 2H9 2G11 2G12 2G13 2H3 2G6

GRAIN TANK SUMP HOUSING AND SHIELD....................

GRAIN TANK SUMP HOUSING AND SHIELD....................

GRAIN TANK VERTICAL AUGER AND HOUSING ............

GRAIN TANK, REINFORCEMENT BRACE ........................

GRAIN TANK, REINFORCEMENT BRACE ........................

GRAIN TANK, SKIRTS..........................................................

GRASS SEED UNLOADING AUGER COVERS ATT. ........

GUARD, STRAW SPREADER..............................................

PAGE 130 - 23 130 - 24 130 - 27 130 - 4 130 - 5 130 - 6 130 - 21 120 - 149

H 2F14 2F15 2F17 2F23 2J4 1A17 1B16 1B14 1B3 1B7 1B2 1B5 1B14 1B9 1B11 2J3 1B20 2J4 1G5 1G6 1D11 2G13 1C11 1C12 1D6 1C16 1B3 1C15 1B2 1F12 2H18 2H20 2H15 2H16 2H13 1D9 2B18 1D7 1D13 1D6 1E13 1F23 2H9 2H20 2H5 2H6 2E4 2E5 2D25 2E2 2C18 1A17

10-8

HANDLE, STRAW CHOPPER CURTAIN ............................

HANDLE, STRAW CHOPPER HOUSING ............................

HANDLE, STRAW CHOPPER HOUSING ............................

HANDLE, STRAW CHOPPER KNIFE AND SUPPORT ......

HARNESS ADAPTER, DIAL-A-MATIC, FOR 900 SERIES HEADERS....................................................

HARNESS, CONTROL BOX ................................................

HARNESS, FIELD LAMP ......................................................

HARNESS, GRAIN TANK ....................................................

HARNESS, HITCH TUBE......................................................

HARNESS, MAIN SEPARATOR AND SHAFT MONITORS........................................................................

HARNESS, MAIN, HITCH TUBE ..........................................

HARNESS, MAIN, SEPARATOR ..........................................

HARNESS, UNLOADING AUGER ........................................

HARVESTRAK COMBINE MONITOR ..................................

HARVESTRAK CONSOLE AND BRACKET ........................

HARVESTRAK LEVER SELECTOR LOCK..........................

HEADER ELECTROMAGNETIC CLUTCH ..........................

HEADER HEIGHT CONTROL, DIAL-A-MATIC, HARNESS ADAPTER FOR 900 SERIES HEADERS ....

HEADER LIFT HYDRAULIC CYLINDER..............................

HEADER LIFT HYDRAULIC CYLINDER KIT ......................

HEADER LIFT OIL LINES ....................................................

HINGE, GRAIN TANK ..........................................................

HITCH BEAM ........................................................................

HITCH BEAM ........................................................................

HITCH BEAM HYDRAULIC LINES AND HOSES ................

HITCH BEAM JACK STAND ................................................

HITCH TUBE HARNESS AND SHORT TURN SENSOR....

HITCH TUBE LOCKING MECHANISM ................................

HITCH TUBE MAIN HARNESS ............................................

HOOD, REAR ........................................................................

HORIZONTAL UNLDG. AUGER DRIVE GEAR CASE ........

HORIZONTAL UNLOADING AUGER AND HOUSING ........

HORIZONTAL UNLOADING AUGER SWIVEL ....................

HORIZONTAL UNLOADING AUGER SWIVEL ....................

HORIZONTAL UNLOADING AUGER SWIVEL SHROUD ..

HOSE AND COUPLER CONVERSION ................................

HOSE,CYL.SHAFT BRG.HSG.LUBE BANK-RH ..................

HOSES AND COUPLERS ....................................................

HOSES AND LINES, HYDRAULIC OIL................................

HOSES, HITCH BEAM HYDRAULIC....................................

HOSES, UNLOADING AUGER SWING HYDRAULIC ........

HOUSE, FEEDER, FRONT SHEETS ..................................

HOUSING AND AUGER, GRAIN TANK VERTICAL............

HOUSING AND AUGER, HORIZONTAL UNLOADING ......

HOUSING AND SHIELD, GRAIN TANK SUMP ..................

HOUSING AND SHIELD, GRAIN TANK SUMP ..................

HOUSING, CLEAN GRAIN ELEVATOR ..............................

HOUSING, CLEAN GRAIN ELEVATOR ..............................

HOUSING, CLEAN GRAIN LOWER AUGER ......................

HOUSING, CLEAN GRAIN LOWER AUGER ......................

HOUSING, CLEANING FAN ................................................

HOUSING, CONTROL BOX..................................................

120 - 131 120 - 132 120 - 134 120 - 140 160 - 15 40 - 3 40 - 27 40 - 25 40 - 14 40 - 18 40 - 13 40 - 16 40 - 25 40 - 20 40 - 22 160 - 14 40 - 31 160 - 15 110 - 12 110 - 13 70 - 9 130 - 6 50 - 5 50 - 6 70 - 3 50 - 10 40 - 14 50 - 9 40 - 13 80 - 7 130 - 37 130 - 39 130 - 33 130 - 34 130 - 31 70 - 6 120 - 28 70 - 4 70 - 11 70 - 3 70 - 37 110 - 5 130 - 27 130 - 39 130 - 23 130 - 24 120 - 93 120 - 94 120 - 89 120 - 91 120 - 55 40 - 3

GRID 1A18 2F5 2E15 2D2 1D2 2F15 2F17 2E21 2E22 2F2 1G6 1G5 1C24 1D6 1D13 1D25 1D1

HOUSING, CONTROL BOX, DIAL-A-MATIC ......................

HOUSING, LOADING AUGER..............................................

HOUSING, LOWER TAILINGS ............................................

HOUSING, SHOE GRAIN SUPPLY AUGERS ....................

HOUSING, SPINDLE, AND WHEEL ....................................

HOUSING, STRAW CHOPPER ............................................

HOUSING, STRAW CHOPPER ............................................

HOUSING, TAILINGS ELEVATOR ......................................

HOUSING, TAILINGS ELEVATOR ......................................

HOUSING, UPPER TAILINGS ..............................................

HYDRAULIC CYLINDER KIT, HEADER LIFT......................

HYDRAULIC CYLINDER, HEADER LIFT ............................

HYDRAULIC HOSE SUPPORT ............................................

HYDRAULIC LINES AND HOSES, HITCH BEAM ..............

HYDRAULIC OIL LINES AND HOSES ................................

HYDRAULIC OIL RESERVOIR ............................................

HYDRAULIC PUMP MOUNTING, BELT PICKUP................

PAGE 40 - 4 120 - 121 120 - 105 120 - 63 50 - 21 120 - 132 120 - 134 120 - 111 120 - 112 120 - 118 110 - 13 110 - 12 50 - 18 70 - 3 70 - 11 70 - 23 50 - 20

I 2C5 2C6 2E10 2H25 2I13 2C24 2F12 2G21 2J8 2J20 1A21 1A22 2H1

IDLER, BEATER ....................................................................

IDLER, BEATER ....................................................................

IDLER, CLEAN GRAIN ELEVATOR ....................................

IDLER, FEEDER HOUSE DRIVE ........................................

IDLER, SECONDARY COUNTERSHAFT DRIVE ................

IDLER, SHOE GRAIN SUPPLY AUGERS ..........................

IDLER, STRAW CHOPPER DRIVE......................................

IDLER, UNLOADING AUGER DRIVE ..................................

IDLERS, FEEDER HOUSE (REG. FIXED) ..........................

IDLERS, STRAW CHOPPER................................................

INDICATORS, CONTROL BOX ............................................

INDICATORS, CONTROL BOX ............................................

INNER UNLOADING AUGER COVERS ..............................

120 - 40 120 - 41 120 - 99 140 - 4 140 - 17 120 - 61 120 - 129 130 - 14 170 - 3 170 - 15 40 - 7 40 - 8 130 - 19

J 1C16 1F17 1C19 1C20

JACK STAND, HITCH BEAM................................................

JACKSTAND, REAR..............................................................

JOINT, UNIVERSAL. REAR ..................................................

JOINT, UNIVERSAL, REAR ..................................................

50 - 10 80 - 13 50 - 13 50 - 14

K 1E9 1D17 1D19 1E8 1E4 1E6 2I16 2J25 2I18 2I15 2I21 1C1 1G6 2I18 1E6 1D21 1D23 1B23 1F1 1F3 1E23

KIT, KIT, KIT, KIT, KIT, KIT, KIT, KIT, KIT, KIT, KIT, KIT, KIT, KIT, KIT, KIT, KIT, KIT, KIT, KIT, KIT,

ADJUSTING SCREW ....................................................

ARMATURE REPAIR (AE37061)..................................

ARMATURE REPAIR (AH96359)..................................

BELT PICKUP FLOW CONTROL VALVE....................

BELT PICKUP PUMP....................................................

BELT PICKUP PUMP BACK PLATE............................

CHECK BLOCK, DIAL-A-MATIC ..................................

DECAL ..........................................................................

DIAL-A-MATIC MAIN VALVE ........................................

DIAL-A-MATIC VALVE ..................................................

DROP RATE VALVE, DIAL-A-MATIC ..........................

ELECTRICAL CONNECTOR SERVICE........................

HEADER LIFT HYDRAULIC CYLINDER......................

MAIN VALVE BLOCK SOLENOID................................

PLATE, BACK, BELT PICKUP PUMP..........................

POPPET REPAIR (AH102055) ....................................

POPPET REPAIR (AH102056) ....................................

TERMINAL AND WIRING ............................................

UNLOADING AUGER SWING HYD. CYL. ..................

UNLOADING AUGER SWING HYD. CYL. ..................

UNLOADING AUGER SWING HYD. CYLINDER ........

COMBINE - 7721 PC1669

70 - 33 70 - 15 70 - 17 70 - 31 70 - 27 70 - 29 160 - 2 170 - 20 160 - 5 160 - 1 160 - 8 40 - 36 110 - 13 160 - 5 70 - 29 70 - 19 70 - 21 40 - 34 70 - 50 70 - 52 70 - 47

(18-APR-00) PN=8

1A10 COMBINE - 7721 ALPHABETICAL INDEX - CONTINUED GRID 1E25 2F23

PAGE KIT,UNLOADING AUGER SWING HYD.CYLINDER............ 70 - 49 KNIFE AND SUPPORT, STRAW CHOPPER ...................... 120 - 140

L 1F14 1B16 1B14 1B14 2E4 2E5 1F25 1B18 1B18 1D13 1D11 1D6 1E11 1E13 2B14 2C15 2F8 2F5 2J14 2J14 2F7 2J14 2J3 1C15 1C15 2B14 1B5 1B7 2E2 2H11 2E17 2E18 2E13 2E18 2E18 2E15 2B19 2B17 2F8 2C12 2C13 2H21 2I8 2I9 2B16 2B18

LADDER, REAR ....................................................................

LAMP, FIELD ........................................................................

LAMP, GRAIN TANK ............................................................

LAMP, UNLOADING AUGER................................................

LATCH, CLEAN GRAIN ELEVATOR....................................

LEVER, CLEAN GRAIN ELEVATOR HOUSING..................

LEVER, DOOR, TOP, FEEDER HOUSE ............................

LIGHTS, TAIL ........................................................................

LIGHTS, WARNING ..............................................................

LINES AND HOSES, HYDRAULIC OIL................................

LINES, HEADER LIFT OIL....................................................

LINES, HITCH BEAM HYDRAULIC......................................

LINES, OIL, BELT PICKUP ..................................................

LINES,OIL,UNLOADING AUGER SWING HYD. ..................

LINK, DUAL-RANGE CYLINDER DRIVE LOCKOUT ARM ..................................................................................

LINKAGE, CLEANING FAN SPEED CONTROL..................

LOADING AUGER AND GRAIN TANK GEAR CASE ........

LOADING AUGER AND HOUSING......................................

LOADING AUGER BELTS ....................................................

LOADING AUGER DRIVE ....................................................

LOADING AUGER GEAR CASE ..........................................

LOADING AUGER SHEAVES ..............................................

LOCK, HARVESTRAK LEVER SELECTOR ........................

LOCKING MECHANISM, HITCH TUBE................................

LOCKING PIN (HITCH TUBE) ..............................................

LOCKOUT ARM, DUAL-RANGE CYLINDER DRIVE ..........

LOW SHAFT SPEED MONITORS........................................

LOW SHAFT SPEED MONITORS........................................

LOWER AUGER, CLEAN GRAIN ........................................

LOWER GEAR CASE, VERTICAL AUGER ........................

LOWER TAILINGS AUGER ..................................................

LOWER TAILINGS AUGER ..................................................

LOWER TAILINGS AUGER DRIVE TIGHTENER................

LOWER TAILINGS AUGER SHAFT ....................................

LOWER TAILINGS AUGER TIGHTENER ............................

LOWER TAILINGS HOUSING ..............................................

LUBE BANK SYS,CYLINDER SHAFT BEARING-LH ..........

LUBE BANK SYS,CYLINDER SHAFT BRG.HSG.-RH ........

LUBE BANK SYSTEM (R.H.)................................................

LUBE BANK SYSTEM, BEATER BEARING-L.H. ................

LUBE BANK SYSTEM, BEATER BEARING-R.H. ................

LUBE BANK SYSTEM, UNLOADING AUGER ....................

LUBE BANK SYSTEM,PRIMARY COUNTERSHAFT-LH ....

LUBE BANK SYSTEM,PRIMARY COUNTERSHAFT-RH ....

LUBE BANK,CYL.DR.CTRSHAFT.BRG.HSG.-RH................

LUBE BANK,CYL.SHAFT BRG.HSG. (R.H.) ........................

80 - 9 40 - 27 40 - 25 40 - 25 120 - 93 120 - 94 110 - 7 40 - 29 40 - 29 70 - 11 70 - 9 70 - 3 70 - 35 70 - 37 120 - 23 120 - 51 120 - 124 120 - 121 170 - 9 170 - 9 120 - 123 170 - 9 160 - 14 50 - 9 50 - 9 120 - 23 40 - 16 40 - 18 120 - 91 130 - 29 120 - 107 120 - 108 120 - 103 120 - 108 120 - 108 120 - 105 120 - 29 120 - 27 120 - 124 120 - 48 120 - 49 130 - 40 140 - 12 140 - 13 120 - 26 120 - 28

M 1C19 1C20 2I17 1B9 1B5 1B7 1B19 1D1 2G6 1E15

MAIN POWERSHAFT............................................................ 50 - 13 MAIN POWERSHAFT............................................................ 50 - 14 MAIN VALVE BLOCK SOLENOID........................................ 160 - 3 MONITOR, HARVESTRAK.................................................... 40 - 20 MONITORS, LOW SHAFT SPEED ...................................... 40 - 16 MONITORS, LOW SHAFT SPEED ...................................... 40 - 18 MOTOR, ELECTRIC - BELT PICKUP DRIVE...................... 40 - 30 MOUNTING, BELT PICKUP HYDRAULIC PUMP................ 50 - 20 MOUNTING, STRAW SPREADER ...................................... 120 - 149 MOUNTING,UNLOADING AUGER SWING HYDRAULIC.... 70 - 39

COMBINE - 7721 PC1669

(18-APR-00)

GRID 1E17 1E18 1E20 2C5 2C6 1A21 1A22 2I3 1A18

PAGE MOUNTING,UNLOADING AUGER SWING HYDRAULIC.... 70 - 41 MOUNTING,UNLOADING AUGER SWING HYDRAULIC.... 70 - 42 MOUNTING,UNLOADING AUGER SWING HYDRAULIC.... 70 - 44 MOUNTINGS AND BEATER IDLER .................................... 120 - 40 MOUNTINGS AND BEATER IDLER .................................... 120 - 41 MOUNTINGS, CYLINDER TACHOMETER .......................... 40 - 7 MOUNTINGS, CYLINDER TACHOMETER .......................... 40 - 8 MOUNTINGS, PRIMARY COUNTERSHAFT........................ 140 - 7 MTG. BRKT., CONTROL BOX, DIAL-A-MATIC .................. 40 - 4

O 1D13 1E11 1D11 1E13 1D25 2B24 2H2

OIL LINES AND HOSES, HYDRAULIC................................ 70 - 11 OIL LINES, BELT PICKUP.................................................... 70 - 35 OIL LINES, HEADER LIFT.................................................... 70 - 9 OIL LINES, UNLOADING AUGER SWING HYD. ................ 70 - 37 OIL RESERVOIR, HYDRAULIC............................................ 70 - 23 OPEN-BAR CONCAVE.......................................................... 120 - 35 OPTIONAL ADJUSTABLE FRONT AND REAR GRAIN TANK AUGER COVERS .................................................. 130 - 20

P 2D7 2G13 1C15 2D20 2F19 2F21 1E6 1F6 2B8 2B9 1D21 1D23 1C24 1C17 1C14 1C19 1C20 2I3 2J9 2I1 2H24 2I8 2I9 2I5 2I6 2J10 2J10 1D1 1E2 1E4

PAN, EXTENSION, STRAW WALKER ................................

PANEL, GRAIN TANK ..........................................................

PIN, LOCKING (HITCH TUBE) ............................................

PITMAN, SIEVE ....................................................................

PLATE AND FINS, STRAW CHOPPER ..............................

PLATE AND FINS, STRAW CHOPPER ..............................

PLATE, BACK, BELT PICKUP PUMP KIT ..........................

PLATE, FEED, CYLINDER ..................................................

PLATE, FILLER, RASP-BAR ................................................

PLATE, FILLER, RASP-BAR (DUAL-RANGE CYLINDER DRIVE) ..........................................................

POPPET REPAIR KIT (AH102055) ......................................

POPPET REPAIR KIT (AH102056) ......................................

POWERSHAFT AND FRONT UNIV. JOINT SHIELDS........

POWERSHAFT AND SHIELD, TELESCOPING ..................

POWERSHAFT BEARING SUPPORT..................................

POWERSHAFT, MAIN ..........................................................

POWERSHAFT, MAIN ..........................................................

PRIMARY COUNTERSHAFT AND MOUNTINGS................

PRIMARY COUNTERSHAFT DRIVE SHEAVES ................

PRIMARY COUNTERSHAFT DRIVE SHIELD ....................

PRIMARY COUNTERSHAFT DRIVE TIGHTENER..............

PRIMARY COUNTERSHAFT LUBE BANK SYSTEM-LH ....

PRIMARY COUNTERSHAFT LUBE BANK SYSTEM-RH....

PRIMARY COUNTERSHAFT SHEAVES..............................

PRIMARY COUNTERSHAFT SHEAVES..............................

PRIMARY COUNTERSHAFT TO TIGHTENERS ................

PRIMARY CTRSHFT TO TORQ-SENSING CTRSHFT ......

PUMP MOUNTING, BELT PICKUP HYDRAULIC................

PUMP, BELT PICKUP ..........................................................

PUMP, BELT PICKUP KIT....................................................

120 - 69 130 - 6 50 - 9 120 - 83 120 - 136 120 - 138 70 - 29 80 - 1 120 - 17 120 - 18 70 - 19 70 - 21 50 - 18 50 - 11 50 - 8 50 - 13 50 - 14 140 - 7 170 - 4 140 - 5 140 - 3 140 - 12 140 - 13 140 - 9 140 - 10 170 - 5 170 - 5 50 - 20 70 - 25 70 - 27

Q 1F21 1F20 1F21 1F20 2B11

QUIK-TATCH COUPLER (L.H.) ............................................

QUIK-TATCH COUPLER (R.H.)............................................

QUIK-TATCH COUPLER SHIELDS (L.H.)............................

QUIK-TATCH COUPLER SHIELDS (R.H.) ..........................

QUILL, DUAL-RANGE CYLINDER GEAR CASE ................

110 - 3 110 - 1 110 - 3 110 - 1 120 - 20

10-9

PN=9

1A11 COMBINE - 7721 ALPHABETICAL INDEX - CONTINUED GRID

PAGE

R 2B8 2B9 2C4 2G25 1F12 1F13 1F17 1F14 1B18 2F9 1F17 1B16 1B18 2G11 2G12 2C2 1D25 2D7 1C15 1F13 2F25 2G1

RASP-BAR CYLINDER..........................................................

RASP-BAR CYLINDER (DUAL-RANGE CYLINDER DRIVE) ..............................................................................

RATCHET, CONCAVE ADJUSTING SHAFT ......................

REAR CROSS AUGER, GRAIN TANK ................................

REAR HOOD ........................................................................

REAR HOOD SUPPORT ROD ............................................

REAR JACKSTAND ..............................................................

REAR LADDER......................................................................

REAR REFLECTORS............................................................

REAR SHIELD, SEPARATOR (R.H.)....................................

REAR SUPPORT TUBE........................................................

REFLECTOR, FRONT ..........................................................

REFLECTORS, REAR ..........................................................

REINFORCEMENT BRACE, GRAIN TANK ........................

REINFORCEMENT BRACE, GRAIN TANK ........................

REMOTE DUMP STONE TRAP ..........................................

RESERVOIR, HYDRAULIC OIL............................................

RISER, STRAW WALKER ....................................................

ROD, CONTROL (HITCH TUBE)..........................................

ROD, SUPPORT, REAR HOOD ..........................................

ROTOR AND BLADES, STRAW CHOPPER ......................

ROTOR AND BLADES, STRAW CHOPPER ......................

120 - 17 120 - 18 120 - 39 130 - 18 80 - 7 80 - 8 80 - 13 80 - 9 40 - 29 120 - 125 80 - 13 40 - 27 40 - 29 130 - 4 130 - 5 120 - 37 70 - 23 120 - 69 50 - 9 80 - 8 120 - 142 120 - 143

S 1C11 1C12 1F6 2I11 2I13 1B22 1B3 1B2 1B3 1A24 2D5 1F10 1B5 1B7 1F8 2F9 2A19 2F10 2J24 1C1 1C23 2E12 2C4 2A25 2B1 1G7 2E18 1G10 2B13 2B9 2B8 2D22 2G4 1G12 2B22

10-10

SAFETY CHAIN, HITCH ......................................................

SAFETY CHAIN, HITCH ......................................................

SEALS, CYLINDER DOOR ..................................................

SECONDARY COUNTERSHAFT..........................................

SECONDARY COUNTERSHAFT DRIVE IDLER ................

SENSING UNIT, STRAW WALKER PLUGGING ................

SENSOR, HITCH TUBE........................................................

SENSOR, SHORT TURN ......................................................

SENSOR, SHORT TURN ......................................................

SENSOR, TACHOMETER CYLINDER SPEED....................

SEPARATOR CURTAINS......................................................

SEPARATOR L.H. SIDE SHEETS AND FRAME ................

SEPARATOR MAIN HARNESS ............................................

SEPARATOR MAIN HARNESS AND SHAFT MONITORS........................................................................

SEPARATOR R.H. SIDE SHEETS AND FRAME ................

SEPARATOR REAR SHIELD (R.H.) ....................................

SEPARATOR RIGHT-HAND SHIELD ..................................

SEPARATOR, RIGHT-HAND SHIELD..................................

SERIAL NO. PLATE ..............................................................

SERVICE KIT, ELECTRICAL CONNECTOR........................

SHAFT (GEAR CASE) ..........................................................

SHAFT, CHAIN, CLEAN GRAIN ELEVATOR ......................

SHAFT, CONCAVE ADJUSTING..........................................

SHAFT, CYLINDER DRIVE INTERMEDIATE ......................

SHAFT, DUAL-RANGE CYLINDER DRIVE INTERMEDIATE ................................................................

SHAFT, IDLER, FEEDER CONVEYOR................................

SHAFT, LOWER TAILINGS AUGER ....................................

SHAFT, LOWER, FEEDER HOUSE ....................................

SHAFT, PINION, DUAL-RANGE CYLINDER DRIVE ..........

SHAFT, RASP-BAR (DUAL-RANGE CYLINDER DRIVE) ..............................................................................

SHAFT, RASP-BAR CYLINDER ..........................................

SHAFT, SHOE PITMAN ........................................................

SHAFT, STRAW SPREADER ..............................................

SHAFT, UPPER, FEEDER HOUSE......................................

SHEAR BAR, CYLINDER......................................................

50 - 5 50 - 6 80 - 1 140 - 15 140 - 17 40 - 33 40 - 14 40 - 13 40 - 14 40 - 11 120 - 67 80 - 5 40 - 16 40 - 18 80 - 3 120 - 125 120 - 3 120 - 127 170 - 19 40 - 36 50 - 17 120 - 101 120 - 39 120 - 9 120 - 10 110 - 14 120 - 108 110 - 17 120 - 22 120 - 18 120 - 17 120 - 85 120 - 147 110 - 19 120 - 33

GRID 1E2 2E12 2E10 2C22 2B11 2F7 2E17 2E13 1G10 2F24 2G4 2D11 2G20 2E11 2J11 2J10 2J10 2J16 2J11 2J14 2J9 2J12 2J9 2J14 2I5 2I6 2B8 1G12 2J8 2J13 1G2 1F23 2G13 1G4 1F25 2H5 2H6 1C17 2A18 2I1 2B15 1G9 1C25 2F9 2A19 2F10 2F24 2D11 2D7 2E22 1B5 1F21 1F20 2G2 1C24 2D23 2D4 2J13 2C24 2C22 2C22 2J13 2C24 2D2 2D22 2D22

SHEAVE, BELT PICKUP ......................................................

SHEAVE, CHAIN, CLEAN GRAIN ELEVATOR....................

SHEAVE, CLEAN GRAIN ELEVATOR ................................

SHEAVE, DRIVE, SHOE GRAIN SUPPLY AUGERS..........

SHEAVE, DUAL-RANGE CYLINDER GEAR CASE ............

SHEAVE, GEAR CASE, LOADING AUGER ........................

SHEAVE, LOWER TAILINGS AUGER ................................

SHEAVE, LOWER TAILINGS AUGER DRIVE ....................

SHEAVE, LOWER, FEEDER HOUSE ..................................

SHEAVE, STRAW CHOPPER ROTOR ................................

SHEAVE, STRAW SPREADER ............................................

SHEAVE, STRAW SPREADER DRIVE ................................

SHEAVE, UNLOADING AUGER DRIVE ..............................

SHEAVE,DR.CTRSHAFT.,CLEAN GRAIN ELEVATOR ......

SHEAVES AND BELTS, BEATER DRIVE ..........................

SHEAVES AND BELTS, CYLINDER DRIVE........................

SHEAVES AND BELTS, TORQ-SENSING CTRSHAFT ......

SHEAVES AND SPROCKETS, TAILINGS ELEVATOR ......

SHEAVES, BEATER DRIVE ................................................

SHEAVES, CLEAN GRAIN ELEVATOR ..............................

SHEAVES, DRIVE, BELT PICKUP PUMP ..........................

SHEAVES, DRIVE, CLEANING FAN....................................

SHEAVES, DRIVE, PRIMARY COUNTERSHAFT ..............

SHEAVES, LOADING AUGER..............................................

SHEAVES, PRIMARY COUNTERSHAFT ............................

SHEAVES, PRIMARY COUNTERSHAFT ............................

SHEAVES, RASP-BAR CYLINDER ......................................

SHEAVES, UPPER, FEEDER HOUSE ................................

SHEAVES,DRIVE,FEEDER HOUSE (REG. FIXED) ............

SHEAVES,DRIVE,SHOE GRAIN SUPPLY AUGERS ..........

SHEETS, BOTTOM, FEEDER HOUSE ................................

SHEETS, FRONT, FEEDER HOUSE ..................................

SHEETS, GRAIN TANK ........................................................

SHEETS, SIDE, FEEDER HOUSE ......................................

SHEETS, TOP, FEEDER HOUSE ........................................

SHIELD AND HOUSING, GRAIN TANK SUMP ..................

SHIELD AND HOUSING, GRAIN TANK SUMP ..................

SHIELD AND TELESCOPING POWERSHAFT....................

SHIELD, CYLINDER DRIVES ..............................................

SHIELD, DRIVE, PRIMARY COUNTERSHAFT ..................

SHIELD, DUAL-RANGE CYLINDER DRIVE GEAR CASE ................................................................................

SHIELD, LEFT-HAND, FEEDER HOUSE ............................

SHIELD, REAR UNIVERSAL JOINT ....................................

SHIELD, REAR, SEPARATOR (R.H.) ..................................

SHIELD, SEPARATOR, RIGHT-HAND ................................

SHIELD, SEPARATOR, RIGHT-HAND ................................

SHIELD, STRAW CHOPPER ROTOR ................................

SHIELD, STRAW SPREADER DRIVE ................................

SHIELD, STRAW WALKER ..................................................

SHIELD, TAILINGS ELEVATOR ..........................................

SHIELDS, MAIN, ELECTRICAL HARNESS ........................

SHIELDS, QUIK-TATCH COUPLER (L.H.) ..........................

SHIELDS, QUIK-TATCH COUPLER (R.H.)..........................

SHIELDS, STRAW SPREADER ..........................................

SHIELDS,POWERSHAFT AND FRONT UNIV.JOINT..........

SHOE CRANKSHAFT DRIVE TIGHTENER ........................

SHOE GRAIN SUPPLY AUGERS ........................................

SHOE GRAIN SUPPLY AUGERS DRIVE BELTS ..............

SHOE GRAIN SUPPLY AUGERS DRIVE IDLER ................

SHOE GRAIN SUPPLY AUGERS DRIVE SHAFT ..............

SHOE GRAIN SUPPLY AUGERS DRIVE SHEAVE ............

SHOE GRAIN SUPPLY AUGERS DRIVE SHEAVES ........

SHOE GRAIN SUPPLY AUGERS DRIVE TIGHTENER......

SHOE GRAIN SUPPLY AUGERS HOUSING ......................

SHOE PITMAN ......................................................................

SHOE PITMAN SHAFT ........................................................

COMBINE - 7721 PC1669

PAGE 70 - 25 120 - 101 120 - 99 120 - 59 120 - 20 120 - 123 120 - 107 120 - 103 110 - 17 120 - 141 120 - 147 120 - 73 130 - 13 120 - 100 170 - 6 170 - 5 170 - 5 170 - 11 170 - 6 170 - 9 170 - 4 170 - 7 170 - 4 170 - 9 140 - 9 140 - 10 120 - 17 110 - 19 170 - 3 170 - 8 110 - 9 110 - 5 130 - 6 110 - 11 110 - 7 130 - 23 130 - 24 50 - 11 120 - 1 140 - 5 120 - 25 110 - 16 50 - 19 120 - 125 120 - 3 120 - 127 120 - 141 120 - 73 120 - 69 120 - 112 40 - 16 110 - 3 110 - 1 120 - 145 50 - 18 120 - 87 120 - 65 170 - 8 120 - 61 120 - 59 120 - 59 170 - 8 120 - 61 120 - 63 120 - 85 120 - 85

(18-APR-00) PN=10

1A12 COMBINE - 7721 ALPHABETICAL INDEX - CONTINUED GRID 1B2 2H13 1F10 1F8 2D18 2D20 2D20 2D20 2G13 2G16 2I17 1D2 2E10 2E13 2F12 2E12 2D9 2D12 2G20 2D23 2J16 2J12 2E24 2E25 1C16 1F6 2C2 1D25 2F14 2F12 2J20 2F15 2F17 2J20 2F23 2F19 2F21 2F25 2G1 2F24 2J20 2G4 2D11 2J20 2G6 2G2 2J20 2D7 2J12 2J12 2D12 2D9 1B22 2D11 2H5 2H6 1C5 2D4 2F23 2A21 1F13 1C24 1C14 2E22 1F17 2B18 2D16

SHORT TURN SENSOR ......................................................

SHROUD,HORIZONTAL UNLOADING AUGER SWIVEL....

SIDE SHEETS AND FRAME, SEPARATOR L.H.................

SIDE SHEETS AND FRAME, SEPARATOR R.H. ..............

SIEVE ....................................................................................

SIEVE FRAME ......................................................................

SIEVE FRAME SWINGERS ..................................................

SIEVE PITMAN......................................................................

SKIRTS, GRAIN TANK..........................................................

SKIRTS, GRAIN TANK..........................................................

SOLENOID, MAIN VALVE BLOCK, DIAL-A-MATIC ............

SPINDLE, HOUSING, AND WHEEL ....................................

SPRING, CLEAN GRAIN ELEVATOR..................................

SPRING, LOWER TAILINGS AUGER DRIVE......................

SPRING, STRAW CHOPPER DRIVE ..................................

SPROCKET, CHAIN, CLEAN GRAIN ELEVATOR ..............

SPROCKET, DRIVEN, STRAW WALKER............................

SPROCKET, STRAW WALKER DRIVE TIGHTENER ........

SPROCKET, UNLOADING AUGER DRIVE ........................

SPROCKET,SHOE CRANKSHAFT DRIVE TIGHTENER ....

SPROCKETS AND SHEAVES, TAILINGS ELEVATOR ......

SPROCKETS, DRIVE, STRAW WALKER ............................

SPROCKETS, TAILINGS ELEVATOR CONVEYOR ............

SPROCKETS, TAILINGS ELEVATOR CONVEYOR ............

STAND, JACK, HITCH BEAM ..............................................

STONE TRAP ........................................................................

STONE TRAP, REMOTE DUMP ..........................................

STRAINER, HYDRAULIC RESERVOIR................................

STRAW CHOPPER CURTAIN..............................................

STRAW CHOPPER DRIVE IDLER AND TIGHTENER........

STRAW CHOPPER DRIVES ................................................

STRAW CHOPPER HOUSING ............................................

STRAW CHOPPER HOUSING ............................................

STRAW CHOPPER IDLERS ................................................

STRAW CHOPPER KNIFE AND SUPPORT........................

STRAW CHOPPER PLATE AND FINS................................

STRAW CHOPPER PLATE AND FINS................................

STRAW CHOPPER ROTOR AND BLADES ........................

STRAW CHOPPER ROTOR AND BLADES ........................

STRAW CHOPPER ROTOR SHEAVE AND SHIELD..........

STRAW CHOPPER TIGHTENERS ......................................

STRAW SPREADER ............................................................

STRAW SPREADER DRIVE SHEAVE AND SHIELD ........

STRAW SPREADER DRIVES ..............................................

STRAW SPREADER MOUNTING AND GUARD ................

STRAW SPREADER SHIELDS ............................................

STRAW SPREADER TIGHTENERS ....................................

STRAW WALKER ..................................................................

STRAW WALKER DRIVE CHAIN ........................................

STRAW WALKER DRIVE SPROCKETS..............................

STRAW WALKER DRIVE TIGHTENER ..............................

STRAW WALKER FRONT CRANKSHAFT ..........................

STRAW WALKER PLUGGING SENSING UNIT ..................

STRAW WALKER REAR CRANKSHAFT ............................

SUMP HOUSING AND SHIELD, GRAIN TANK ..................

SUMP HOUSING AND SHIELD, GRAIN TANK ..................

SUPPLEMENTARY TERMINALS AND CONNECTORS......

SUPPLY AUGERS, SHOE GRAIN ......................................

SUPPORT AND KNIFE, STRAW CHOPPER ......................

SUPPORT BRACES, CYLINDER DRIVE ............................

SUPPORT ROD, REAR HOOD ............................................

SUPPORT, HYDRAULIC HOSE ..........................................

SUPPORT, POWERSHAFT, BEARING................................

SUPPORT, TAILINGS ELEVATOR ......................................

SUPPORT, TUBE, REAR......................................................

SUPPORT,CYL.SHAFT BRG.HSG.LUBE BANK-RH ..........

SWINGERS, CHAFFER FRAME ..........................................

COMBINE - 7721 PC1669

(18-APR-00)

PAGE 40 - 13 130 - 31 80 - 5 80 - 3 120 - 81 120 - 83 120 - 83 120 - 83 130 - 6 130 - 9 160 - 3 50 - 21 120 - 99 120 - 103 120 - 129 120 - 101 120 - 71 120 - 75 130 - 13 120 - 87 170 - 11 170 - 7 120 - 114 120 - 115 50 - 10 80 - 1 120 - 37 70 - 23 120 - 131 120 - 129 170 - 15 120 - 132 120 - 134 170 - 15 120 - 140 120 - 136 120 - 138 120 - 142 120 - 143 120 - 141 170 - 15 120 - 147 120 - 73 170 - 15 120 - 149 120 - 145 170 - 15 120 - 69 170 - 7 170 - 7 120 - 75 120 - 71 40 - 33 120 - 73 130 - 23 130 - 24 40 - 40 120 - 65 120 - 140 120 - 5 80 - 8 50 - 18 50 - 8 120 - 112 80 - 13 120 - 28 120 - 79

GRID 2D20 2I23 2H13 2H15 2H16

SWINGERS, SIEVE FRAME ................................................

SWITCH, ACTUATING ..........................................................

SWIVEL SHROUD,HORIZONTAL UNLOADING AUGER....

SWIVEL, HORIZONTAL UNLOADING AUGER ..................

SWIVEL, HORIZONTAL UNLOADING AUGER ..................

PAGE 120 - 83 160 - 10 130 - 31 130 - 33 130 - 34

T 2J1 1A24 2C9 2C10 1A21 1B18 2J16 2E24 2E25 2E24 2E25 2E24 2E25 2E21 2E22 2J16 2G11 2G12 2G13 1C17 1B23 1C5 2B4 2H24 2H24 2B6 1G13 1G11 2E18 2E13 2D23 2F12 2D12 2F1 2C24 2J8 2J20 2J20 2G22 1F15 2J10 2J10 1F6 2C2 1F17

TACHOMETER AND CIRCUIT BOX BRACKET..................

TACHOMETER CYLINDER SPEED SENSOR ....................

TACHOMETER DRIVE ..........................................................

TACHOMETER DRIVE ..........................................................

TACHOMETER, CYLINDER..................................................

TAIL LIGHTS ........................................................................

TAILINGS ELEVATOR AND AUGER DRIVES ....................

TAILINGS ELEVATOR CONVEYOR BEARINGS ................

TAILINGS ELEVATOR CONVEYOR BEARINGS ................

TAILINGS ELEVATOR CONVEYOR CHAIN ........................

TAILINGS ELEVATOR CONVEYOR CHAIN ........................

TAILINGS ELEVATOR CONVEYOR SPROCKETS ............

TAILINGS ELEVATOR CONVEYOR SPROCKETS ............

TAILINGS ELEVATOR HOUSING ........................................

TAILINGS ELEVATOR HOUSING ........................................

TAILINGS ELEVATOR SHEAVES AND SPROCKETS........

TANK, GRAIN, REINFORCEMENT BRACE ........................

TANK, GRAIN, REINFORCEMENT BRACE ........................

TANK, GRAIN, SKIRTS ........................................................

TELESCOPING POWERSHAFT AND SHIELD....................

TERMINAL AND WIRING KIT ..............................................

TERMINALS, SUPPLEMENTARY, AND CONNECTORS....

TIGHTENER, CYLINDER DRIVE..........................................

TIGHTENER, DRIVE, PRIMARY COUNTERSHAFT............

TIGHTENER, DRIVE, UNLOADING AUGER ......................

TIGHTENER, DUAL-RANGE CYLINDER DRIVE ................

TIGHTENER, FEEDER HOUSE DRIVE ..............................

TIGHTENER, LOWER BELT, FEEDER HOUSE ................

TIGHTENER, LOWER TAILINGS AUGER ..........................

TIGHTENER, LOWER TAILINGS AUGER DRIVE ..............

TIGHTENER, SHOE CRANKSHAFT DRIVE ........................

TIGHTENER, STRAW CHOPPER DRIVE............................

TIGHTENER, STRAW WALKER DRIVE ..............................

TIGHTENER, UPPER TAILINGS AUGER DRIVE................

TIGHTENER,DRIVE,SHOE GRAIN SUPPLY AUGERS ......

TIGHTENERS, FEEDER HOUSE (REG. FIXED) ................

TIGHTENERS, STRAW CHOPPER......................................

TIGHTENERS, STRAW SPREADER....................................

TIGHTENERS,GRAIN TANK CROSS AUGER DRIVE ........

TOOL BOX ............................................................................

TORQ-SENSING CTRSHAFT SHEAVES AND BELTS ......

TORQ-SENSING CYL. DR. SHEAVES AND BELTS ..........

TRAP, STONE ......................................................................

TRAP, STONE, REMOTE DUMP ........................................

TUBE SUPPORT, REAR ......................................................

160 - 12 40 - 11 120 - 45 120 - 46 40 - 7 40 - 29 170 - 11 120 - 114 120 - 115 120 - 114 120 - 115 120 - 114 120 - 115 120 - 111 120 - 112 170 - 11 130 - 4 130 - 5 130 - 6 50 - 11 40 - 34 40 - 40 120 - 13 140 - 3 140 - 3 120 - 15 110 - 20 110 - 18 120 - 108 120 - 103 120 - 87 120 - 129 120 - 75 120 - 116 120 - 61 170 - 3 170 - 15 170 - 15 130 - 15 80 - 11 170 - 5 170 - 5 80 - 1 120 - 37 80 - 13

U 1C25 1C19 1C20 1C25 2H18 2H20 2H1 2G20 2G21

UNIVERSAL JOINT SHIELD (REAR) ..................................

UNIVERSAL JOINT, REAR ..................................................

UNIVERSAL JOINT, REAR ..................................................

UNIVERSAL SHIELD, GEAR CASE ....................................

UNLOADING AUG.DRIVE GEAR CASE,HORIZONTAL ......

UNLOADING AUGER AND HOUSING, HORIZONTAL ......

UNLOADING AUGER COVERS ..........................................

UNLOADING AUGER DRIVE COUNTERSHAFT ................

UNLOADING AUGER DRIVE IDLER....................................

50 - 19 50 - 13 50 - 14 50 - 19 130 - 37 130 - 39 130 - 19 130 - 13 130 - 14

10-11 PN=11

1A13 COMBINE - 7721 ALPHABETICAL INDEX - CONTINUED GRID 2G20 2G20 2H24 2J18 1B21 1B14 1B14 2H21 1E25 1E13 1E15 1E17 1E18 1E20 1E13 1E15 1E17 1E18 1E20 2H13 2H15 2H16 2F2 2F1

UNLOADING AUGER DRIVE SHEAVE................................

UNLOADING AUGER DRIVE SPROCKET ..........................

UNLOADING AUGER DRIVE TIGHTENER ........................

UNLOADING AUGER DRIVES ............................................

UNLOADING AUGER ELECTROMAGNETIC CLUTCH ......

UNLOADING AUGER HARNESS ........................................

UNLOADING AUGER LAMP ................................................

UNLOADING AUGER LUBE BANK SYSTEM......................

UNLOADING AUGER SWING HYD.CYLINDER KIT ..........

UNLOADING AUGER SWING HYD.OIL LINES ..................

UNLOADING AUGER SWING HYDRAULIC CYLINDER ....

UNLOADING AUGER SWING HYDRAULIC CYLINDER ....

UNLOADING AUGER SWING HYDRAULIC CYLINDER ....

UNLOADING AUGER SWING HYDRAULIC CYLINDER ....

UNLOADING AUGER SWING HYDRAULIC HOSES ..........

UNLOADING AUGER SWING HYDRAULIC MOUNTING ..

UNLOADING AUGER SWING HYDRAULIC MOUNTING ..

UNLOADING AUGER SWING HYDRAULIC MOUNTING ..

UNLOADING AUGER SWING HYDRAULIC MOUNTING ..

UNLOADING AUGER SWIVEL SHROUD,HORIZONTAL....

UNLOADING AUGER SWIVEL, HORIZONTAL ..................

UNLOADING AUGER SWIVEL, HORIZONTAL ..................

UPPER TAILINGS AUGER AND HOUSING ........................

UPPER TAILINGS AUGER DRIVE TIGHTENER ................

PAGE 130 - 13 130 - 13 140 - 3 170 - 13 40 - 32 40 - 25 40 - 25 130 - 40 70 - 49 70 - 37 70 - 39 70 - 41 70 - 42 70 - 44 70 - 37 70 - 39 70 - 41 70 - 42 70 - 44 130 - 31 130 - 33 130 - 34 120 - 118 120 - 116

GRID

PAGE

V 1E7 1E7 1D15 2I19 2H9 2H11 2J18

VALVE, BELT PICKUP FLOW CONTROL ..........................

VALVE, CONTROL, BELT PICKUP FLOW..........................

VALVE, CYLINDER SPEED CONTROL ..............................

VALVES, DIAL-A-MATIC ......................................................

VERTICAL AUGER AND HOUSING, GRAIN TANK............

VERTICAL AUGER LOWER GEAR CASE ..........................

VERTICAL UNLOADING AUGER DRIVES ..........................

70 - 30 70 - 30 70 - 13 160 - 6 130 - 27 130 - 29 170 - 13

W 1B22 2J22 1B18 2B11 1D2 1B23 1B23 1B9 1A18 1B23 1C5

WALKER, STRAW, PLUGGING SENSING UNIT ................ 40 - 33 WARNING DECALS .............................................................. 170 - 17 WARNING LIGHTS................................................................ 40 - 29 WHEEL, DUAL-RANGE CYLINDER GEAR CASE .............. 120 - 20 WHEEL, SPINDLE, AND HOUSING .................................... 50 - 21 WIRING AND TERMINAL KIT .............................................. 40 - 34 WIRING CRIMPING TOOL .................................................. 40 - 34 WIRING HARNESS, HARVESTRAK COMBINE MONITOR .......................................................................... 40 - 20 WIRING HARNESS,CONTROL BOX,DIAL-A-MATIC .......... 40 - 4 WIRING STRIPPING TOOL .................................................. 40 - 34 WIRING, SUPPLEMENTARY TERMINALS AND CONNECTORS ................................................................ 40 - 40

Y 2E5

10-12

YOKE, CLEAN GRAIN ELEVATOR HOUSING.................... 120 - 94

COMBINE - 7721 PC1669

(18-APR-00) PN=12

ELECTRICAL MEMORANDA

COMBINE - 7721 PC1669

(04-JAN-82)

40-1

PN=13

1A16 ELECTRICAL CONTROL BOX HOUSING, MOUNTING BRACKETS, AND HARNESS (SERIAL NO. -600000) HP2099

40-2

-UN-01JAN94

THIS PARTS LISTING IS CONTINUED COMBINE - 7721 PC1669

(20-JAN-84) PN=14

1A17 ELECTRICAL CONTROL BOX HOUSING, MOUNTING BRACKETS, AND HARNESS - CONTINUED (SERIAL NO. -600000) KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

24 25 26 27 28 29 30 31 32 33 34 35 36

PART NO.

H102597 R54057 37H148 AR87457 R67211 H99925 19H1936 12H310 AR41950 R41879 R41880 37H148 R67215 19H1227 12H297 14H786 19H1227 12H297 14H786 H96604 H80627 M42230 AH102689 14H812 H101161 H101317 H118425 R77464 RE11156 AH102690 H118427 R77458 R77465 RE11157 A32905 R41465 H29322 AT39043 H94337 R11278 AH62341 19H1227 12H302 14H786 H96678 A36895 R67452 R67210 37H153

COMBINE - 7721 PC1669

PART NAME

PLATE SCREW SCREW ADAPTER BRACKET HOUSING CAP SCREW LOCK WASHER NUT BRACKET BRACKET SCREW PLATE CAP SCREW LOCK WASHER NUT CAP SCREW LOCK WASHER NUT COVER GROMMET PLUG WIRING HARNESS NUT BRACKET EYEBOLT CONNECTOR PIN CONTACT TERMINAL WIRING HARNESS CONNECTOR CONNECTOR SOCKET CONTACT TERMINAL CAP CLAMP SCREW HIGH NOTE HORN BRACKET NUT RELAY CAP SCREW LOCK WASHER NUT PLATE SCREW COVER BASE SCREW

(27-JUN-85)

QTY

1 2 5 1 1 1 2 2 1 2 1 2 1 4 4 4 4 4 4 1 1 1 1 2 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 1 1 1 4

SERIAL NO.

REMARKS

1/4" X 5/8" (SOUND GARD CAB) 3/8" X 3/4" 3/8" (PRE-SOUND GARD CABS--1968-1971) (PRE-SOUND GARD CABS--1968-1971) 1/4" X 5/8" (4 WHEEL DRIVE-8430, 8440, 8630, 8640) 1/4" X 1/2" 1/4" 1/4" 1/4" X 1/2" 1/4" 1/4"

3/8" 22 HOLES (PKG. OF 50) (PKG. OF 3) (4 WHEEL DRIVE-8430, 8440, 8630, 8640) 22 HOLES (PKG. OF 50) (PKG. OF 3)

(LOW NOTE)

1/4" X 1/2" 1/4" 1/4" SELF-TAPPING 0.190" X 3/8"

40-3

PN=15

1A18 ELECTRICAL CONTROL BOX HOUSING, MOUNTING BRACKETS AND HARNESS (DIAL-A-MATIC) (SERIAL NO. 600001) HP2736

40-4

-UN-01JAN94

THIS PARTS LISTING IS CONTINUED COMBINE - 7721 PC1669

(08-OCT-86) PN=16

1A19 ELECTRICAL CONTROL BOX HOUSING, MOUNTING BRACKETS AND HARNESS - CONTINUED (DIAL-A-MATIC) (SERIAL NO. 600001) KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39

PART NO.

H115156 R54057 37H148 AR87457 R67211 H99925 19H1936 12H310 AR41950 R41879 R41880 37H148 R67215 19H1227 12H297 14H786 H118420 R77469 AH112736 H115317 H80627 R11278 AH89557 H29322 H118428 RE11156 H118421 R77458 RE11157 14H812 H101317 AH112737 R77456 R77464 R77457 R77458 R77465 A32905 H101161 AT39043 H94337 AH62341 19H1227 12H302 14H786 H96678 A36895 R67452 R67210 H118422 R77460 R77465 37H153 AH90990

COMBINE - 7721 PC1669

PART NAME

PLATE SCREW SCREW ADAPTER BRACKET HOUSING CAP SCREW LOCK WASHER NUT BRACKET BRACKET SCREW PLATE CAP SCREW LOCK WASHER NUT SOCKET TERMINAL WIRING HARNESS COVER GROMMET NUT CLIP SCREW CONNECTOR TERMINAL ELECTRICAL PLUG CONNECTOR TERMINAL NUT EYEBOLT WIRING HARNESS RECEPTACLE PIN CONTACT ELECTRICAL PLUG CONNECTOR SOCKET CONTACT CAP BRACKET HIGH NOTE HORN BRACKET RELAY CAP SCREW LOCK WASHER NUT PLATE SCREW COVER BASE ELECTRICAL PLUG CONNECTOR SOCKET CONTACT SCREW CLIP

(08-OCT-86)

QTY

1 2 5 1 1 1 2 2 1 2 1 2 1 8 8 8 1 2 1 1 2 1 1 2 2 1 1 1 1 2 1 1 2 1 1 1 1 2 1 1 1 1 2 2 2 1 2 1 1 1 1 1 4 1

SERIAL NO.

REMARKS

1/4" X 5/8" (SOUND-GARD CAB) 3/8" X 3/4" 3/8" (PRE-SOUND-GARD CABS, 1968-1971) (PRE-SOUND-GARD-CABS, 1968-1971) 1/4" X 5/8" (4-WHEEL DRIVE - 8430,8440,8630 AND 8640) 1/4" X 1/2" 1/4" 1/4" (PKG. OF 5)

7 HOLES (PKG. OF 3) 7 HOLES (PKG. OF 3) 3/8" 37 HOLES (PKG. OF 50) 37 HOLES (PKG. OF 50)

1/4" X 1/2" 1/4" 1/4"

9 HOLES RETAINER (PKG. OF 50) 0.190" X 3/8"

40-5

PN=17

1A20 ELECTRICAL CONTROL BOX INDICATORS, CYLINDER TACHOMETER, AND MOUNTINGS (SERIAL NO. -600000) H32583

40-6

-UN-01JAN94

a

THIS PARTS LISTING IS CONTINUED COMBINE - 7721 PC1669

(20-JAN-84) PN=18

1A21 ELECTRICAL CONTROL BOX INDICATORS, CYLINDER TACHOMETER, AND MOUNTINGS - CONTINUED (SERIAL NO. -600000) KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

PART NO.

21H1283 12H295 14H778 AH93153 AH94791 AH87806 H94505 H94664 AH93711 H101261 AH75662 AM31284 14H631 12H295 AH96683 AH85260 M42561 AH85259

COMBINE - 7721 PC1669

PART NAME

QTY

SCREW LOCK WASHER NUT DEVICE LAMP SWITCH NUT GRIP TOGGLE SWITCH PLATE BULB BULB NUT LOCK WASHER TACHOMETER SWITCH NUT KNOB

2 2 2 1 7 1 3 3 2 1 1 1 5 5 1 1 1 1

(20-JAN-84)

SERIAL NO.

REMARKS

0.190" X 3-1/2" 0.190" 0.190" BUZZER INDICATOR TOGGLE, (UNLOADING AUGER) (BELT PICKUP) (CYLINDER SPEED) -513350 5133510.190" 0.190" CYLINDER (ELECTRIC CLUTCH) CLUTCH

40-7

PN=19