CHK ADJ
CONTROL SYSTEM
E
ADJUSTING THE THROTTLE CABLE NOTE: Before adjusting the throttle cable, be sure to adjust the carburetor synchronization and the engine idling speed. 1. Check: • Throttle operation Incorrect → Adjust. NOTE: Make sure the throttle valves are fully closed when the remote control lever or the tiller handle grip is fully closed. 2. Adjust: • Throttle cable length Adjustment steps (1) Disconnect the throttle cable joint 1 . (2) Set the throttle control lever or tiller handle grip to the fully closed position. (3) Adjust the position of the throttle cable joint until its hole aligns with the set pin on the throttle control lever 2 . (4) Install the clip 3 and tighten the locknut 4 .
2
8.0 mm (0.31 in)
4
3
1
CAUTION: The throttle control cable joint must be screwed in more than 8.0 mm (0.31 in).
3-4