Page 124

INSP ADJ

CONTROL SYSTEM

E Shift cable adjustment (FT9.9DMH, FT9.9DEH) 1. Check: 9 Shift cable Damage → Replace. Incorrect shift lever position/poor shifting → Adjust.

2. Adjust: 9 Shift cable Adjusting steps: 8 Move the shift lever (tiller handle side) so the shift lever (engine side) is in the neutral position. 8 Remove the locknut 1. 8 Remove the shift cable 2 from the shift lever (engine side). 8 Set the shift lever (tiller handle side) to the neutral position. 8 Adjust the shift cable to the proper length with the adjusting nut 3. 8 Install the shift cable onto the shift lever (engine side). 8 Install the locknut and fully tighten it. 8 Move the shift lever (tiller handle side) to the forward, neutral, and reverse positions and make sure it shifts smoothly and correctly. Also, make sure both shift levers are in the same position (e.g., both in the neutral position). If the shifting operation is unsmooth or incorrect, repeat the above procedure.

3-7

Yamaha f15amh, f15mshx outboard service repair manual s 001432  
Yamaha f15amh, f15mshx outboard service repair manual s 001432  
Advertisement