Page 31

Air Cleaner

100 YRM 1594

AIR CLEANER ASSEMBLY, TIER 4I/STAGE III B, F876/F877 Remove 1. Open the left- and right-hand hood doors. 2. Loosen the hose clamps on the air filter hose and remove the hose. See Figure 3. 3. On F877 trucks, tag and disconnect the connectors to the vacuum switch and to the Temperature and Barometric Air Pressure (TBAP) sensor. 4. On F876 tag and disconnect the connectors to the vacuum switch and to the Mass Air Flow (MAF) Sensor. See Figure 4. 5. Remove the 4 capscrews that retain the brackets of the air cleaner unit to the hood. 6. Lower the air cleaner unit until it clears the air duct. 7. Move the air cleaner to the right-hand side of the truck.

Install 1. If removed, install the brackets on the cleaner unit. 2. Verify presence and correct seating of the seal on the air cleaner intake tube 3. Move the air cleaner into its position under the hood and then upwards, until it engages with the air duct. 4. Align the holes in the brackets with the spacers under the hood. 5. Install the capscrews on the cleaner brackets. 6. On F877 trucks, connect the connectors to the vacuum switch and to the Temperature and Barometric Air Pressure (TBAP) sensor according to tags. 7. On F876 trucks, connect the connectors to the vacuum switch and to the Mass Air Flow (MAF) Sensor according to tags. 8. Install the air filter hose and tighten clamps. 9. Close the hood doors.

4

1. 2. 3. 4. 5. 6. 7. 8. 9.

AIR HOSE AIR CLEANER UNIT VACUUM SWITCH TBAP SENSOR AIR CLEANER BRACKET CAPSCREWS PRECLEANER CLAMP AIR PRECLEANER AIR DUCT

Figure 3. Air Cleaner Assembly, Tier 4i/Stage III B, F877

Yale f876 gdp230dcs lift truck service repair manual  
Yale f876 gdp230dcs lift truck service repair manual  
Advertisement