Gearbox Replacement STEP 23. Using a press, press the input shaft into the drive gear until the input shaft is fully seated against the drive gear.
STEP 24. Place the inner ring of the needle bearing in position on the input shaft.
STEP 25. Place a cylinder in position on the inner ring for the needle bearing. Using a press, press the inner ring onto the input shaft until the inner ring is fully seated against the drive gear. Cylinder dimensions: • Inside diameter - 20.3 mm (0.80 in.) • Outside diameter - 25 mm (0.98 in.) • Height for inside diameter end - minimum 20 mm (0.79 in.)
34
1400 YRM 1223