8200 SERIES TRACTORS
Introduction
1A01.33
H . Tightening torques Use the recommended tightening torques for nuts and bolts in accordance with tables: - 1 and 2: for metric threads - 3 and 4: for non-metric threads Where a particular torque is required, it is mentioned in the text. Tables 1 and 3 indicate the normal values of the tightening torques applicable with zinc-plated threaded elements with normal nuts, coarse or fine threads, with or without flat or lock washers, and weld nuts having a height greater than 0.8 d. Tables 2 and 4 indicate the lower torque values applicable to threaded elements in assemblies using selflocking safety nuts, zinc-plated, phosphate coated nuts and bolts, flat nuts, and weld nuts having a height less than 0.8 d. These values apply to all dry assemblies. If the threads are lubricated, reduce the tightening torques in consequence.
Note: Read the strength classification on the head of the bolt and determine the corresponding torque to be applied.
Example:
8,8
Issue 2
May 2002