G GENERAL
L3130 · L3430 · L3830 · L4630 · L5030, WSM
Adjusting Toe-in 1. Park the tractor on the flat place. 2. Inflate the tires to the specified pressure. 3. Turn steering wheel so front wheels are in the straight ahead position. 4. Lower the implement, lock the parking brake and stop the engine. 5. Measure distance between tire beads at front of tire, hub height. 6. Measure distance between tire beads at rear of tire, hub height. 7. Front distance should be 2 to 8 mm (0.079 to 0.315 in.) less than rear distance. 8. If the measurement is not within the factory specifications, adjust by changing the tie-rod length. Toe-in (B - A)
Factory spec.
2 to 8 mm 0.079 to 0.315 in.
■ Adjusting 1. Detach the snap ring (1). 2. Loosen the tie-rod nut (2) and turn the tie-rod joint (3) to adjust the tie-rod length until the proper toe-in measurement is obtained. 3. Retighten the tie-rod nut (2). 4. Attach the snap ring (1) of the tie-rod joint. Tightening torque
Tie-rod lock nut
166.7 to 196.1 N·m 17.0 to 20.0 kgf·m 123 to 145 ft-lbs
■ IMPORTANT • A right and left tie-rod joint is adjusted to the same length. (1) Snap Ring (2) Tie-rod Nut (3) Tie-rod Joint
(A) Wheel to Wheel Distance at front (B) Wheel to Wheel Distance at rear (C) Front W1082751
G-28
KiSC issued 02, 2007 A