1
Section 1
General
1-3
1-3
Torque Settings Use only where no torque setting is specified in the text. Values are for dry threads and may be within three per cent of the figures stated. For lubricated threads the values should be REDUCED by one third. UNF Grade 'S' Bolts Bolt Size in 1
/4
5
/16
3
/8
7
/16
1
/2
9
/16
5
/8
3
/4
7
/8
1 11/4 11/2
(mm) (6.3) (7.9) (9.5) (11.1) (12.7) (14.3) (15.9) (19.0) (22.2) (25.4) (31.7) (38.1)
Hexagon (A/F) in 7
/16
1
/2
9
/16
5
/8
3
/4 13 /16 15 /16 1 /8 5 /16 1 /2 7 /8 1 /4
1 1 1 1 2
Nm 14 28 49 78 117 170 238 407 650 970 1940 3390
Torque Settings kgf m 1.4 2.8 5.0 8.0 12.0 17.3 24.3 41.5 66.3 99.0 198.0 345.0
lbf ft 10 20 36 58 87 125 175 300 480 715 1430 2500
Nm
Torque Settings kgf m
lbf ft
Metric Grade 8.8 Bolts Bolt Size (mm) M5 M6 M8 M10 M12 M16 M20 M24 M30 M36
(5) (6) (8) (10) (12) (16) (20) (24) (30) (36)
Hexagon (A/F) mm 8 10 13 17 19 24 30 36 46 55
7 12 28 56 98 244 476 822 1633 2854
0.7 1.2 3.0 5.7 10 25 48 84 166 291
5 9 21 42 72 180 352 607 1205 2105
* Rivet Nut Bolts/Screws Bolt Size M3 M4 M5 M6 M8 M10 M12
(mm) (3) (4) (5) (6) (8) (10) (12)
Torque Settings (for steel rivet nuts) Nm kgf m lbf ft 1.2 0.12 0.9 3.0 0.3 2.0 6.0 0.6 4.5 10.0 1.0 7.5 24.0 2.5 18.0 48.0 4.9 35.5 82.0 8.4 60.5
Note: All bolts used on JCB machines are high tensile and must not be replaced by bolts of a lesser tensile specification.
9803/3600
Issue 2*