Page 97

Section 3 - Routine Maintenance Routine Maintenance Prepare the Machine for Maintenance

Prepare the Machine for Maintenance Introduction

!MWARNING Maintenance must be done only by suitably qualified and competent persons. Before doing any maintenance make sure the machine is safe, it should be correctly parked on level ground. To prevent anyone starting the engine, remove the starter key. Disconnect the battery when you are not using electrical power. If you do not take these precautions you could be killed or injured. 8-3-1-1

Make the machine safe before you start a maintenance procedure. You can complete the maintenance procedures shown in this manual with the loader arm lowered (Position A). Unless a maintenance procedure instructs you differently, you must lower the loader arm. Refer to How to Make the Machine Safe (Loader Arm Lowered). If you lift the loader arm to get access for maintenance (Position B), you must install a suitable mechanical device (for example, a maintenance strut on the loader arm). Refer to How to Make the Machine Safe (Loader Arm Lifted).

3-29

9803/4160-16

T033550-1

Fig 2.

3-29

Jcb 446 wheeled loader service repair manual sn540000 to 540011  
Jcb 446 wheeled loader service repair manual sn540000 to 540011  
Advertisement