Page 37

MAIN CONTROLLER

(6) Maintenance alarm function

Display

Hour glass symbol shows the request of programmed maintenance or the state of Alarm. In this case the relative code will be displayed.

Combination Display The combination display communicates with the controller and functions as indicated below. Its power is supplied from the controller. (1) BDI (Battery discharge indicator) function Five LEDs, show the battery’s State of Charge. Four Green, and one Red. With a fully charged battery, all the Green LEDs are illuminated. As the battery becomes discharged, the Green LEDs turn off progressively, one after the other, in proportion to the residual charge of the battery, until value of residual charge is reached. At this time the Red LED illuminates indicating a discharged battery.

Action Lights (1) Brush wear indicator: Drive motor, pump motor Indicates when the the drive motor or pump motor brush becomes worn. (2) Brake fluid indicator

(2) Hourmeter function

Indicates when the brake fluid level become low.

Hourmeter indicates cumulative line contactor ON hours. When the hourmeter is working, hourglass symbol flashes.

(3) Parking brake Illuminates when the parking brake is being applied.

(3) Error code display function The display shows an error code and flashes red LED when an abnormality occurs. (4) Truck mode display function The display shows the turtle symbol when Economy Mode (Mode A) is selected.

(5) Software version display function When the Key Switch is initially closed, the display shows the EPROM Version for a few seconds. (EPXXX where XXX represents the version). Simultaneously the symbol of a Shifting Spanner appears.

3-16

Caterpillar cat ep15krt forklift lift trucks chassis, mast and options service repair manual snetb10  
Caterpillar cat ep15krt forklift lift trucks chassis, mast and options service repair manual snetb10  
Advertisement