ELECTRICAL SYSTEM 4. Auto-light sensitivity adjusting knob
(1) This knob is for adjusting the sensitivity level at which the auto-light system turns ON and OFF the head lamps. (2) The knob has been set as shown. (3) The more the knob is turned to the right, the lower will be the sensitivity at which the system turns ON and OFF the head lamps. 205005
NOTE (1) Use a screwdriver to turn the knob. (2) Be careful not to damage the groove of the knob when putting a screwdriver.
5. Working precautions
(1) When installing the controller, position it correctly. Be careful not to turn upside down. (2) When resetting or adjusting the controller on the truck, be sure to turn OFF the starter switch and lighting switch. (3) When removing the rubber cover, check to see if the sealing label was removed before. (If this label shows a sign of removal, ask the user for removal of the label.) (4) Be careful not to damage the rubber cover when it is off the controller. (5) Do not let any foreign matter fall into the controller through setting window.
3-29
205037