Figure 10-160-22
CAB TILT PROCEDURE (CONT’D) Tilting The Cab (Cont’d) Figure 10-160-20
1
1 P-33040
Install a winch (Item 1) [Figure 10-160-22] to the clevis on the cab. Install the other end of the winch to the chain that was installed on the arm.
P-33039
Install the clevis (Item 1) [Figure 10-160-20] on the right (as viewed from the operator’s seat) corner of the cab.
IMPORTANT
Figure 10-160-21
When tilting the cab, use winches and chains that are in good condition and of proper weight ratings.
2
I-2215-0502
Lower the left console and close the cab door. Figure 10-160-23 1
1
P-33041
Install a chain (Item 1) around the arm between the bucket and the bucket link (Item 2) [Figure 10-160-21]. 2
P-33036
Winch the cab forward until the front of the cab (Item 1) contacts the bumpers (Item 2) [Figure 10-160-23].
10-160-6
442 Excavator Service Manual