Figure 10-80-8
FUEL SYSTEM (CONT’D) Fuel Filters (Cont’d) Replacing Elements (Cont’d)
1 Figure 10-80-6
1 1 1
1
1
P-69933
Remove the filter (Item 1) [Figure 10-80-8].
2 1
Clean the area around the filter housing. Put clean oil on the seal of the new filter. Install the fuel filter and hand tighten. Clean up any spilled fuel.
1 P-73053
Remove the seven bolts (Item 1) and the floor panel (Item 2) [Figure 10-80-6].
Remove the air from the fuel system. (See Removing Air From The Fuel System on Page 10-80-4.)
Figure 10-80-7
1
2
P-73021
NOTE: Fuel will flow from the fuel inlet hose when it is removed from the inline filter. Clamp off the inlet hose before removing it from the filter or plug the hose when it is removed. Remove the filter (Item 1) [Figure 10-80-7] from the retaining clamp. Remove the two hose clamps (Item 2). Remove and replace the filter (Item 1) [Figure 10-80-7].
10-80-3
425 Service Manual