Fig. 2-53
Fig. 2-56
A769
A772
17. Disconnect the magneto lead from the ignition coil lead. Remove the screws securing the ignition coil; then remove the coil.
20. Slide the cylinder straight upward until free of the piston. Remove the base gasket. Fig. 2-57
Fig. 2-54
A771 A756
18. Remove the cylinder head nuts and washers; then lift the head off the cylinder studs.
21. Remove the piston pin circlips; then using the Piston Pin Puller (p/n 0644-328), remove the piston pin.
Fig. 2-55
Fig. 2-58
A939
19. Slide the head gasket off the cylinder studs.
A776
GEAR CASE/CRANKCASE
22. Using an impact screwdriver, remove the screws securing the gear case cover. Lift the cover off the crankcase.
2-14