Main Menu
Table of Contents
Cruise Control Actuator/Cable Replacement 1.
Disconnect the 4P connector from the actuator.
2.
Remove the three mounting bolts and the actuator with the bracket.
6.
ADJUSTING NUT
VACUUM HOSE MOUNTING BOLT
Loosen the locknut, then disconnect the actuator cable from the throttle linkage.
MOUNTING BOLTS
CABLE BRACKET
7.
4P CONNECTOR
3.
Remove the vacuum hose.
4.
Remove the three nuts.
5.
Disconnect the actuator cable from the actuator rod by releasing the clip from the rod with a screwdriver as shown. CLIP
ACTUATOR ROD
LOCKNUT
ACTUATOR CABLE
ACTUATOR CABLE
NUTS
THROTTLE LINKAGE
Install in the reverse order of removal, and adjust free play at the throttle linkage after connecting the actuator cable.