Edition: January 1999 Revision: January 1999 Publication No. SM9E-1R50U0
This Service Manual is applicable for 1999 model years vehicles beginning with serial No. 350001~. The serial No. is shown on the Vehicle Identification Number plate.
All rights reserved. No part of this Service Manual may be reproduced or stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of Nissan Motor Company Ltd., Tokyo, Japan.
QUICK REFERENCE INDEX
FOREWORD This manual contains maintenance and repair procedures for the 1999 Nissan PATHFINDER. In order to assure your safety and the efficient functioning of the vehicle, this manual should be read thoroughly. It is especially important that the PRECAUTIONS in the GI section be completely understood before starting any repair task. All information in this manual is based on the latest product information at the time of publication. The right is reserved to make changes in specifications and methods at any time without notice.
IMPORTANT SAFETY NOTICE The proper performance of service is essential for both the safety of the technician and the efficient functioning of the vehicle. The service methods in this Service Manual are described in such a manner that the service may be performed safely and accurately. Service varies with the procedures used, the skills of the technician and the tools and parts available. Accordingly, anyone using service procedures, tools or parts which are not specifically recommended by NISSAN must first be completely satisfied that neither parsonal safety nor the vehicle's safety will be jeopardized by the service method selected.
TEST VALUE AND TEST LIMIT (GST ONLY — NOT APPLICABLE TO CONSULT-II) The following is the information specified in Mode 6 of SAE J1979. The test value is a parameter used to determine whether a system/circuit diagnostic test is “OK” or “NG” while being monitored by the ECM during self-diagnosis. The test limit is a reference value which is specified as the maximum or minimum value and is compared with the test value being monitored. Items for which these data (test value and test limit) are displayed are the same as SRT code items. These data (test value and test limit) are specified by Test ID (TID) and Component ID (CID) and can be displayed on the GST screen.
Self-diagnostic test item
Three way catalyst function (Bank 1) Three way catalyst function (Bank 2)
P0420 P0430 P0440 P1440 P1447 P0133 P0131 P0130 P0132 P0134 P0153 P0151 P0150 P0152 P0154 P0139 P0137 P0140 P0138 P0159 P0157 P0160 P0158 P0135 P0135 P0155 P0155 P0141 P0141 P0161 P0161 P0400 P0400 P0400 P0400 P1402 P0402 P0402
EVAP control system (Small leak) EVAP control system purge flow monitoring
Heated oxygen sensor 1 (Bank 1)
Heated oxygen sensor 1 (Bank 2) HO2S
Heated oxygen sensor 2 (Bank 1)
Heated oxygen sensor 2 (Bank 2)
Heated oxygen sensor 1 heater (Bank 1) Heated oxygen sensor 1 heater (Bank 2) HO2S HTR Heated oxygen sensor 2 heater (Bank 1) Heated oxygen sensor 2 heater (Bank 2)
EGR function EGR SYSTEM
EGRC-BPT valve function
Test value (GST display) TID CID 01H 03H 05H 05H 06H 09H 0AH 0BH 0CH 0DH 11H 12H 13H 14H 15H 19H 1AH 1BH 1CH 21H 22H 23H 24H 29H 2AH 2BH 2CH 2DH 2EH 2FH 30H 31H 32H 33H 34H 35H 36H 37H
01H 02H 03H 03H 83H 04H 84H 04H 04H 04H 05H 85H 05H 05H 05H 86H 86H 06H 06H 87H 87H 07H 07H 08H 88H 09H 89H 0AH 8AH 0BH 8BH 8CH 8CH 8CH 8CH 0CH 0CH 8CH
Max. Max. Max. Max. Min. Max. Min. Max. Max. Max. Max. Min. Max. Max. Max. Min. Min. Max. Max. Min. Min. Max. Max. Max. Min. Max. Min. Max. Min. Max. Min. Min. Min. Min. Min. Max. Max. Min.
1/128 1/128 1/128mm2 1/128mm2 20mV 16ms 10mV 10mV 10mV 1s 16ms 10mV 10mV 10mV 1s 10mV/500ms 10mV 10mV 10mV 10mV/500ms 10mV 10mV 10mV 20mV 20mV 20mV 20mV 20mV 20mV 20mV 20mV 1 1 1 1 1 1count 1count
Thank you very much for your reading. Please Click Here Then Get More Information.