Page 63

)LJ

)LJ 

$

$

9. Place the centrifugal onto the PTO-end of crankshaft making sure the notch of the centrifugal aligns with keyway of the crankshaft.

12. Install the bearing in the gear case housing. Apply grease to the inner lips of the seal; then place the seal into position.

)LJ

)LJ 

$

10. Secure the PTO-end crankshaft components by applying blue Loctite #242 to the nut, installing the PTO-end nut, and tightening the nut to 3-4 kg-m (22-29 ft-lb).

$

13. Install the primary driven shaft. )LJ 

)LJ

$

$

11. Install the shifter so the centrifugal weights are positioned against the shifter arms.



14. Apply High-Temp Sealant (p/n 0636-069) to both sides of the gear case gasket. Place the gasket against the crankcase.

1999 arctic cat powder special 600 efi powder special 600 efi le snowmobile service repair manual  
1999 arctic cat powder special 600 efi powder special 600 efi le snowmobile service repair manual  
Advertisement