BODY AND STEERING Steering - Conventional Front Suspension Steering 1. .
With the handlebars in the straight ahead position, skis should be parallel at points A and 8. Skis must not toe in. 1\
CAUTION: The steering assembly should be checked whenever a machine comes in for tune-up or repair.
I
A
=-~....r--'=-
lbl
11- -~.P -
- /,-
0
0
II B
Steering Removal NOTE: To retain proper ski alignment, the spindle and steering arm should be marked. 1.
Remove steering arm bolt (A).
2.
Adjust tie rod end (8) by turning clockwise or counterclockwise until skis are parallel with each other and with vehicle track and frame when handlebars are in straight ahead position.
CAUTION: If there is evidence of wear or stress on the tie rods or tie rod end bearings, they should be replaced as a complete unit.
3.
Remove spindle from body.
CAUTION: If spindles are cracked or bent they must be replaced. NOTE: Spindles should be lubricated annually to insure proper steering.
8/94
2.14
151
II 1\
II /I
'I
'-.J