Page 4

0100 YRM 1735

Hood, Seat, and Side Covers Replacement

Hood, Seat, and Side Covers Replacement REMOVE 1. Slide seat all the way to the rear of the hood. 2. Use tilt lever and tilt steering column all the way forward. See Figure 2.

7. Remove capscrews, washers, and left and right rear side covers from frame. 8. For lift truck models GLP/GDP16-18VX, GLP/ GDP20SVX (GLP/GDP030-035VX, GLP/ GDP040SVX) (D810), remove eight capcrews, eight clip nuts, and left and right step covers from frame. See Figure 6. 9. For lift truck models GLC030-035VX, GLC040SVX (D809), remove six capscrews and left and right step plates from frame. See Figure 6. For lift truck models GLP/GDP16-18VX, GLP/ GDP20SVX (GLP/GDP030-035VX, GLP/ GDP040SVX) (D810), remove six capscrews, six clip nuts, and left and right step plates from frame. See Figure 6.

1. TILT LEVER 2. GAS CYLINDER Figure 2. Steering Column Tilt Lever 3. If your truck is equipped with an LPG tank, swing tank off to the side. See PSI 2.0L LPG Fuel System 0900YRM1739 for procedures. 4. Raise hood latch on the left, front corner of the hood to unlatch and lift up hood. See Figure 3. 5. Disconnect the battery. 6. Remove floor mat and floor plate. •

See Figure 4 for lift truck models GLC030-035VX, GLC040SVX (D809)

See Figure 5 for lift truck models GLP/ GDP16-18VX, GLP/GDP20SVX (GLP/ GDP030-035VX, GLP/GDP040SVX) (D810)

1. HOOD LATCH 2. HOOD Figure 3. Hood Latch

3

Profile for 1639589

YALE D810 GLP20SX LIFT TRUCK (EUROPE) Service Repair Manual  

YALE D810 GLP20SX LIFT TRUCK (EUROPE) Service Repair Manual  

Profile for 1639589
Advertisement