0100 YRM 1735
Engine Replacement Legend for Figure 25
A. AIR INTAKE SYSTEM - LIFT TRUCKS EQUIPPED WITH LPG ENGINE
B. AIR INTAKE SYSTEM - LIFT TRUCKS EQUIPPED WITH DIESEL ENGINE
1. 2. 3. 4.
5. 6. 7. 8.
MOUNTING BRACKET CAPSCREW INTAKE MANIFOLD (DIESEL) SILENCER (DIESEL)
1. 2. 3. 4. 5.
LPG FUEL LINE LPG LOCK-OFF DIESEL FUEL LINES DIESEL FUEL FILTER ENGINE WIRE HARNESS
LPG FUEL MIXER AIR INTAKE HOSE DIRTY AIR HOSE AIR INTAKE HOUSING
NOTE: Tag wires and connectors prior to disconnecting to aid in re-connecting. 14. Disconnect engine harness connectors from the right hand chassis harness connectors before removing the engine from the truck. See Figure 26. 15. Remove torque converter from flywheel. •
Lift trucks equipped with LPG engine Use access port on side of engine and remove the four bolts that attach the flywheel to torque converter. See Figure 27.
Lift trucks equipped with diesel engine Remove two capscrews and dust cover from access port. Use access port on the side of engine and remove the four bolts that attach flywheel to torque converter. See Figure 27.
16. Connect a lifting device to engine. Put a block under the transmission housing to support the transmission. 17. Remove two capscrews, two washers, and torque converter housing cover. See Figure 28. 18. Remove four flange bolts from torque converter housing and flywheel housing on transmission side. See Figure 28. 19. Remove six hex head capscrews from flywheel housing and torque converter housing on flywheel housing side. See Figure 28.
Figure 26. Fuel Line and Engine Wire Harness Disconnection